CNC lathes - CNC Outlet Center

Powered by TCPDF (www.tcpdf.org)
Lathes
20.01.2017
Citizen, Cincom L12-VII , 2013
Mitsubishi M70 PLC, Turning diameter (mm): 12
Turning length (mm): 135, Spindle bores (mm): 12
Location: cnc,
C-Axis, Y-Axis, Driven tools, High frequency spindle,
Coolant unit 40 bar
DMG MORI, ecoTurn 510 V3 , 2016
Siemens 840 Dsl - ShopTurn, Chuck diameter (mm):
315
Turning diameter (mm): 465, Turning length (mm):
1.050
Spindle bores (mm): 90, Location: cnc
Live tools, C-axis, 90mm bar capacity, 12 bar coolant
pump, Chip conv.
EMAG, VL 3, 2014
Siemens 840 Dsl, Chuck diameter (mm): 170
Location: cnc,
C-Axis, Chip conveyor, Workpiece transportatio
CMZ, TC 25 Y, 2011
Fanuc 31i - Manual Guide, Chuck diameter (mm):
250
Turning diameter (mm): ca.500, Turning length (mm):
ca. 800
Spindle bores (mm): 66, Location: cnc
C-Axis, Y-Axis, Driven tools, Touch probe, Tool
setter, Chip conveyor, Bar feeder interface
EMAG, VL 2, 2014
Fanuc, Chuck diameter (mm): 160
Turning length (mm): 150, Location: cnc
Chip conv., Driven tools
EMCO, Emcomat 20 D, 2016
Chuck diameter (mm): 200, Location: cnc
Soft block jaws 3x, Coolant system
Nakamura, WT 100 - MMY, 2014
Fanuc 31i-B, Chuck diameter (mm): 165
Turning diameter (mm): 170, Turning length (mm):
503
Spindle bores (mm): 42, Location: cnc
C-Axis, Y-Axis, Driven tools, Bar loader, Part catcher
Note: Mistakes and prior sale reserved!
CNC Outlet Center GmbH | Gewerbering 6 | D 82140 Olching
Tel. +49 (0)8142 / 44 87 – 115 | Fax +49 (0)8142 / 44 87 – 150
[email protected] | www.cnc-outlet.de
1/1