C 25.2 - Dynacord
Transcrição
C 25.2 - Dynacord
Technische Informationen Engineering Data Sheet C 25.2 2x 15“ / 2“ 2-Way Fullrange Cabinet Features: • • • • • • • • Multi-Functional 2-Way Cabinet 1000 W, 4 Ohms 60° x 40° Rotatable Coverage Pattern 103 dB Sensitivity, 139 dB Maximum SPL Crossover with HF Protection 2x SMX2151 LF Transducer ND2-8 Compression Driver M8 Threaded Points C 25.2 Order No. Cabinet Configuration F01U165093 Fullrange Passive 2-Way Nominal impedance 4 Ohms Minimum Impedance 3.1 Ohms Rated Power RMS 1000 W Peak Power 4000 W Sound pressure level SPL 1 W / 1 m 103 dB Max. SPL 1 m (calculated with peak power) 139 dB Frequency Range (-10 dB) Nominal Coverage Angle (Horizontal x Vertical) X-Over Frequency 55 Hz to 15 kHz 60° x 40° (or 40° x 60°) 1750 Hz LF Transducer 2x SMX2151, 15 ‘‘ (381 mm) Driver HF Transducer ND2-8, 2 ‘‘ (51 mm) Diaphragm Compression Driver Connectors Dimensions (W x H x D) 2x Neutrik Speakon NL4 Full-Range 1+ / 1Wired through 2+ / 2445 mm x 1130 mm x 445 mm (17.5“ x 44.5“ x 17.5“) Net Weight 44.9 kg (99.0 lbs) Shipping Weight 50.5 kg (111.3 lbs) Wir weisen ausdrücklich darauf hin, dass bei gehängten Lautsprecherboxen die einschlägigen Sicherheitsbestimmungen zu beachten sind. Es muss unbedingt qualifizierte Fachberatung in Anspruch genommen werden! Enclosure material We expressly point out that the relevant safety regulations must be observed for “flying” loudspeaker systems. It is imperative that qualified expert advice is sought. Optional Accessories Grille Suspension Warranty EBK-M8 Eye Bolt Kit MDF with D-PUR PLUS Steel, Black Finish with Acoustic Gauze 6x M8 threaded Points - 2x on Each Side and 2x on the Rear of Enclosure 5 years F01U166797 Spare Parts LF Transducer F01U134309 HF Transducer F01U106894 Beschreibung Description Werden sehr hohe Schalldrücke aus kompaktem Format gebraucht ist die trapezförmige C 25.2 als Doppel - 15" / 2-Weg Fullrange Box mit einer sehr hohen Belastbarkeit von 1000W Continuous / 4000W Peak und einem Wirkungsgrad von 103 dB 1W / 1m die richtige Wahl. Der Maximal-Schalldruck beträgt 139 dB und erlaubt auch im FullrangeBetrieb die Beschallung größerer Räume und Events. Im Tieftonbereich kommen zwei SMX 2151 Woofer zum Einsatz, im Hochtonbereich arbeitet ein ND2-8 Neodymium Compression-Treiber in ein rotierbares 60° x 40° Constant Directivity Horn für den Frequenzbereich oberhalb 1750 Hz. Für das Crossover wurden für eine sehr steilflankige Trennung Filter sechster Ordnung gewählt. Flugpunkte für Eyebolts erlauben vertikale oder horizontale Aufhängung. Als ideale Ergänzung für sehr druckvolle Aktiv-2-Weg Systeme wird der Doppel-18" Subwoofer Sub 2.18 zusammen mit den Controllern DSP 260 oder DSP 600 und Endstufen der Serien SL oder LX empfohlen. Geeignete Presets stehen für beide Controller zur Verfügung, bei Verwendung des DSP 600 auch ein FIR-TUNE Preset. If very high sound pressure levels are required from a compact format, the trapezoidal C 25.2 double 15" / two-way full-range cabinet is the ideal choice, with its very high power handling (1000W continuous / 4000W peak) and sensitivity of 103 dB 1W / 1m. Boasting a maximum SPL of 139 dB, it is capable-even in full-range operation-of providing coverage for larger rooms and events. In the low frequency range, two SMX 2151 woofers are used, whilst in the high frequency range, an ND2-8 neodymium compression driver in a rotatable 60° x 40° constant directivity horn covers the frequencies above 1750 Hz. The crossover is implemented using a sixth order filter with a very steep roll-off. Flying points for eybolts allow the cabinet to be suspended either vertically or horizontally. As the ideal companion for a very powerful active two-way system, the double 18" subwoofer Sub 2.18 is recommended together with the DSP 260 or DSP 600 controllers and power amplifers from the SL or LX series. Suitable presets for both controllers are available, as well as a FIR-TUNE preset for the DSP 600. Illustration 1: Dimensions Illustration 2: Frequency Response SPL / dB Frequency Response, 1/6 Oct. 110 105 100 95 90 85 80 75 70 65 60 20 100 1k 10k 20k 10k 20k 10k 20k f / Hz Impedance, 1/6 Oct. 200 100 |Z| / Ω 50 20 10 5 2 1 20 100 1k f / Hz −6dB Beamwidth, 1/1 Oct. 360 φ / deg 200 100 80 60 40 30 20 10 20 horizontal vertical 100 1k f / Hz 25 Directivity Index DI, Directivity Factor Q, 1/1 Oct. 200 20 100 20 10 10 5 5 2 0 20 100 f / Hz 1k 10k 1 20k Q DI / dB 50 15 Illustration 3: Block diagram Illustration 4: Horizontal Directivity Horizontal Directivity, 3dB/Div, 30dB Radius, 1/1 Oct. 0° 30° −30° 30° 60° −60° 90° −90° 120° −120° 150° 30° ±180° 0° −120° 150° 30° ±180° 0° 60° ±180° 120° 60° ±180° −150° 250 Hz −30° −60° 90° −90° 120° −120° 30° −150° 8 kHz ±180° 0° 60° −30° −120° 150° −120° 150° −90° 120° 120° −150° 1 kHz −60° 90° −90° 30° −120° ±180° 0° 90° −30° −90° −30° −60° 150° 90° 0° 60° −150° 125 Hz −60° 30° −150° 4 kHz ±180° 0° 60° −30° −120° 150° −120° 150° −90° 120° 120° −150° 500 Hz −60° 90° −90° 30° −90° 120° 90° −30° 90° 30° −60° 150° −60° −30° 60° −150° 63 Hz 60° 0° ±180° 0° 60° −150° 2 kHz −30° −60° 90° −90° 120° −120° 150° ±180° −150° 16 kHz Illustration 5: Vertical Directivity Vertical Directivity, 3dB/Div, 30dB Radius, 1/1 Oct. 90° 120° 60° 120° 150° 30° ±180° 0° −150° −120° 120° −30° −90° 90° −150° 120° −30° −90° 90° 150° −120° −90° 150° −120° −90° −60° 8 kHz −90° 90° −60° 250 Hz 60° 30° ±180° 0° −150° −120° 120° −30° −30° 150° 60° 0° −150° −150° −60° 1 kHz 30° ±180° 0° 120° −30° −90° 90° ±180° 60° −150° 60° 30° −120° 0° 90° 150° −60° 125 Hz ±180° 120° −60° 4 kHz −90° 90° 30° 60° −30° −30° 150° −120° 0° −150° −150° −60° 500 Hz 30° ±180° 0° 120° 0° −120° ±180° 60° ±180° 120° 30° −120° 30° 60° 150° −60° 63 Hz 150° 90° −30° −90° 90° 150° −60° 2 kHz 60° 30° ±180° 0° −150° −120° −30° −90° −60° 16 kHz Rigging Illustration 6: Remove the M8 Screws from the Loudspeaker, then install the Washers and Eyebolts(EBK-M8 Eye Bolt Kit) to the Loudspeaker Washer has to be used Illustration 7: Eyebolts shown oriented in the plane of pull (CORRECT) Illustration 8: Eyebolts not oriented in the plane of pull (INCORRECT) Illustration 9: C 25.2 vertically suspended (CORRECT) Illustration 10: C 25.2 vertically suspended (INCORRECT) WARNING: Suspension points are to be used for a single enclosure only, never arrays. Never exceed the limitations or maximum recommended working load for the C 25.2 systems. Illustration 11: Vertical orientation CAUTION: Illustration 12: Horizontal orientation Eyebolts must be fully seated and orient in the plane of pull as shown. Always use washers under the eyebolt to distribute the load on the enclosure. 12000 Portland Avenue South, Burnsville, MN 55337, USA Phone: +1 952/844-4051, Fax: +1 952/884-0043 www.dynacord.com © Bosch Communications Systems Part Number F01U164570 Vs 01 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: +49 9421-706 0 Fax: +49 9421-706 265 Asia & Pacific only. For customer orders, contact Customer Service at: +65 6571 2534 Fax: +65 6571 2699 For technical assistance, contact Technical Support at: +49 9421-706 0 09/2010 Specifications subject to change without notice.