INDUTHERM water chiller with 18 kW cooling capacity Item number

INDUTHERM water chiller with 18 kW cooling capacity
Item number 71000195
cooling capacity
available pressure
storage tank capacity
dimensions
transport dimensions
maximum ambient temperature
electrical supply
net weight
transport weight
18.2 kW
5 bar
115 liters
W 800 x D 1500 x H 1300 mm
W 900 x D 1550 x H 1350 mm
5 ... 40 ° C
400V / 3phase, 50Hz, 5.6kW
215 kg
240 kg
General Description
This water chiller is a closed system with a storage tank, circulation pump, cooling
system and temperature control.
This water cooler can also cool down below room temperature. He is a strong pump
supplied with 5 bar water pressure output.
He is also with hose and fittings, supplied suitable for Indutherm machines.
They parallel three VC 600 or CC / GC / VC use with this unit,
1000-3000. The unit we delivered in a box on a wooden pallet. If you want a
complete wooden box, which must be specified when ordering extra. In another
supply voltage, the refrigeration system to another item number and a different price.
http://www.INDUTHERM.de
Amtsgericht Karlsruhe, HRB 7720
Ust-IdNr: DE 812 105 175
Geschäftsführer: Peter Hofmann Dipl. Ing. FH
Eckhard Scheer Maschinenbaumeister
Klaus Schmidt Dipl. Ing. FH
Technical Details
housing
Cladding panels made of treated steel sheet with powder coating in RAL 7035. Base
frame in RAL cobalt blue 5013th.
Maintenance-friendly arrangement of the main components.
refrigeration cycle
In addition to the previously described components of the refrigeration cycle consists
of:
- TRV
- Refrigerant sight glass
- High pressure
- Low pressure and fan pressure switch
- High pressure and low pressure gauges
refrigeration compressor
Fully hermetic refrigeration compressor suction gas as a reciprocating compressor.
Thermal overload protection of the compressor.
air-cooled condenser
Air-cooled, high range of seamless drawn copper refrigerant pipes and pressed pure
aluminum fins. Protection against mechanical damage to the blades. Generous sizing
of the condenser allows. Ambient temperatures up to + 40 ° C.
vaporizer
Evaporator as a high-performance heat exchangers for refrigerant / water from
drawn. Copper refrigerant pipes and pressed pure aluminum fins. Freezing of the
evaporator is not possible during operation.
http://www.INDUTHERM.de
Amtsgericht Karlsruhe, HRB 7720
Ust-IdNr: DE 812 105 175
Geschäftsführer: Peter Hofmann Dipl. Ing. FH
Eckhard Scheer Maschinenbaumeister
Klaus Schmidt Dipl. Ing. FH
storage tank
The filling of the cooler is an integrated filling tank. This tank serves as an open
expansion tank. Tank made of steel, optional stainless steel bar for pressures up to
6. Closed water circuits can be connected via a pressure control system with
integrated filling-set. The tank top is a connection, including manual air vent and the
bottom fitted with a drain tap. If desired, can also be supplied in stainless steel.
water cycle
The water cycle consists of a properly sized storage tank with an evaporator and a
pump. Pressure of 5 bar pump guarantees a fixed bypass the smooth operation of
the chiller at low water.
control board
Microprocessor - control via the display parameters on a symbolized display including
double spaced function display all relevant components (compressor, fan and pump).
The ease of use allows even experienced operators monitoring and modification of
the parameters of the chiller. In addition, be carried out regardless of the custom
setting additional control and monitoring functions (excerpt):
- Measurement, display and any further processing of cold-water temperature
- Indication and warning of any over-or undershooting of a predefined
water temperature (upper and lower limit)
- Alarm history on display, as well as 8 other functions
Advantages of this water-cooler
30 years experience in the construction of water coolers
The producer of water-cooler for 30 years successfully building water cooler.
cost savings in operating costs
Enclosed is a practical example calculation
Indutherm currently pays 4.35 € for 1 m³ (220 gal) water. A machine CC1000
requires approximately 4 liters per minute => for all-day use of 8 hours to cool
consumption 1.92 m³ = 8,3 € per day => at 200 working days 1660 € in year. Power
consumption (at a mean cycle 50%, pump and compressor 1kW 50% of 5kW)
8h = 3.5 kW * 28kWh * 0.18 Euro Cents = 5,04 € per day = 1008 € per year.
http://www.INDUTHERM.de
Amtsgericht Karlsruhe, HRB 7720
Ust-IdNr: DE 812 105 175
Geschäftsführer: Peter Hofmann Dipl. Ing. FH
Eckhard Scheer Maschinenbaumeister
Klaus Schmidt Dipl. Ing. FH
advantages of large energy storage tank
Due to the large volume of the built-in storage tanks, a high temperature stability is
guaranteed.
external installation
With the IP54 and the use of powder-coated, galvanized sheets, the outdoor
installation of the cooler possible without additional protective measures such as
roofing.
low pressure loss
By using a disk pack evaporator resulting pressure losses <0.1 bar. This results in a
low power consumption of the pumps and thus a reduced release of heat into the
cold water cycle, which in turn increases the available cooling capacity.
modular
If the cooler operated in a closed water cycle, one or more coolers are connected in
parallel. This allows the redundant systems combined as required or as needed
easily be extended.
quick and easy maintenance
Pump, electrical control cabinet and the refrigeration cycle with all relevant
components are easily accessible in the front. Part of the device constructed. Ease of
access reduces the time and thus the costs for Inspection and maintenance of the
refrigeration unit.
approved as all products and components
Each radiator is individually tested in computer-controlled test booths. All devices are
tested under normal operating conditions, measured temperature, pressure
parameters, flow rate and power be.
high-tech cooler, the result of extensive research and experience
With the most modern, computer-assisted technique was to detail the components
and production methods complete series optimized. The use of quality components
from reputable manufacturers results in a Product that meets the highest
requirements for reliability and service life.
http://www.INDUTHERM.de
Amtsgericht Karlsruhe, HRB 7720
Ust-IdNr: DE 812 105 175
Geschäftsführer: Peter Hofmann Dipl. Ing. FH
Eckhard Scheer Maschinenbaumeister
Klaus Schmidt Dipl. Ing. FH
guarantee and service
Planning, construction, testing and servicing of products made on the basis of the
quality system. Since July 1996 the quality system is certified according to ISO 9001
by the CA. An important role in supporting the customer plays the tight service
network and comprehensive knowledge of the maintenance staff. Very short
response time combined with high efficiency are natural for us.
http://www.INDUTHERM.de
Amtsgericht Karlsruhe, HRB 7720
Ust-IdNr: DE 812 105 175
Geschäftsführer: Peter Hofmann Dipl. Ing. FH
Eckhard Scheer Maschinenbaumeister
Klaus Schmidt Dipl. Ing. FH