Technical Datasheet - HERTZ by Elettromedia
Transcrição
Technical Datasheet - HERTZ by Elettromedia
www.hertzaudiovideo.com Technical Specifications DBA 200.3 140 W Component Active Subwoofer, Double Passive Radiator Reflex Speaker Size mm (in.) 200 (8) Passive Radiator Size mm (in.) 200 (8) x 2 Power handling Wpeak 140 Impedance Ω4 Frequency Response Hz 32 ÷ 400 Sensitivity dB/SPL 92 Magnet High density flux ferrite Cone Water-repellent pressed paper Weight of one kg (lb.) 7,80 (17.19) component Electro-Acoustic Parameters mm166 mm5 Ω2,9 Hz54 l12 g49 mm/N0,18 T m 10,6 -0,40 -0,42 -6,88 dB93 8’’ massive motor active subwoofer. 8’’ double passive radiator. 140 W integrated power amplifier. Frequency, Level, Phase adjustable controls. Dual speaker input: pre-amplified low-level input (RCA, for Aftermarket head units); amplified high-level input (speaker cable, for OEM head units). Single connector for easy installation and removal of the subwoofer. Constructed from 18 mm MDF. Slanted lower panel to ease the enclosure installation next to the seats. Grille featuring Hertz logo, offering total speaker protection. C B A 293 mm (11.6 in.) B 330 mm (13 in.) C 263 mm (10.4 in.) A Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it All specifications subject to change without notice_12.A D Xmax Re Fs Vas Mms Cms BL Qts Qes Qms Spl 1. 2. 3. 4. 5. 6. 7. 8. 9. www.hertzaudiovideo.com Power Supply Signal Inputs / Filters Power supply voltage: Idling current: Idling current when off: Consumption @ 14.4 VDC (Max Musical Power): 11 ÷ 15 VDC 0,5 A 0.02 mA 13 A Inputs: Filters (Full/Lo-Pass) Continuous adjustable: Subsonic (Hi-Pass) fixed: Speakers polarity: Pre IN / Speakers IN 50 ÷ 120 Hz @ 12 dB/Oct. 35 Hz @ 24 dB/Oct. 0 - 180° Amplifier Stage Distortion - THD (1kHz @ 4Ω): Bandwidth (-3 dB): S/N ratio (A weighted @ 1V): Damping factor (100 Hz @ 4Ω): Input sensitivity (PRE IN): Input sensitivity (HIGH IN): Input impedance (PRE IN): Input impedance (HIGH IN): Output power (RMS) 14.4 VDC, 1% THD, 4Ω: Max dynamic power: 1 LO PASS 2 SENSITIVITY 3 Hz 120 Min Max .3 - 5.0 VRMS 4 Remote IN: Fuse: 5 6 7 ÷ 15 VDC - 1 mA 20 A 7 PHASE SHIFT 0 50 Other Functions 0.05 % 35 ÷ 120 Hz 103 dBA 100 0.3 ÷ 5 V RMS 1.2 ÷ 18 V RMS 7k Ω 470k Ω 110 W 140 W 180 Degree FUSE 20A SAFETY POWER L R L R ON OFF L R GND L R GND REM AUTO TURN ON ON Not connected OFF to GND REMOTE IN HI LEVEL POWER 1. LO PASS: Low-pass crossover adjustment (50 Hz - 120 Hz) 2.SENSITIVITY: Sensitivity adjustment 3. PHASE SHIFT: Phase control (0° - 180°) 4.SAFETY: Signal led for amplifier in protection mode 5.POWER: Signal led for amplifier in operation 6.CONNECTOR: Power supply input POWER IN and sound signal (Hi-Level, Low-Level) 7.FUSE: 20A Blade fuse Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it All specifications subject to change without notice_12.A PRE IN
Documentos relacionados
Dica de caixa selada de 28 Litros
X2 Premier - Projeto de Caixa Acústica Expert AutoSom.net
Leia mais