REDWALL® 4010/3020/404
Transcrição
REDWALL® 4010/3020/404
REDWALL® 4010/3020/404 EXTERNAL PIR SENSORS FEATURES • • • • • • • • • • • Reliable operation All-metal sensor head High RFI/EMI immunity 40m x 10m long range 30m x 20m wide angle 40m x 4m curtain Dual channel processing Twin dual sensors Tamper resistant bracket High or medium sensitivity setting IP 65 rated CONCEPT The Redwall® 4010/3020 and 404 are PIR sensors specifically designed for external CCTV detection applications. Their small size, attractive appearance and accurate detection makes them ideal for the activation of video transmission systems and the positioning of pan and tilt and dome cameras. They can also be used on manned CCTV systems to alert an operators attention to movement in a specific area. These detectors are single ended devices and do not emit or transmit signals. They are safe for use in all applications. OPERATION Detection is achieved by monitoring far infrared levels between an intruder and the background in the detectors multiple fields of view. These detectors use twin dual element sensors and twin electronic processors to achieve detection while maintaining operational stability. A precision optical array combining reflective and refractive lenses provide the sensors with a precise coverage pattern that can be accurately aligned using the LRP 1020 Audio Walk Tester. AUDIO WALK-TEST OUTPUT DETECT LED ‘&’/‘OR’ SELECTOR SWITCH A I.R. SENSORS ZONE A ANALYSER ALARM DETECTOR MEMORY ‘A’ ‘&’/‘OR’ LOGIC PROCESSOR ZONE B ANALYSER ALARM DETECTOR DETECTOR HEAD ALARM RELAY TIMER MEMORY ‘B’ B CONTROL UNIT Security Enclosures Limited Unit 9, Four Seasons Crescent, Sutton, Surrey SM3 9QR, UK. Tel: +44 (0)20 8254 22 22. Fax: +44 (0)20 8641 00 17. internet address: www.securityenclosures.co.uk E-Mail: [email protected] REDWALL® 4010/3020/404 EXTERNAL PIR’S 40M X 10M, 30M X 20M AND 40M X 4M COVERAGE APPLICATIONS The Redwall® 4010/3020 and 404 are rugged all metal outdoor passive infrared detectors designed to operate as motion sensors for CCTV installations. They can be used to activate video transmission systems, position pan and tilt or dome cameras or alert an operators attention to movement in a specific area. When used in conjunction with an LRP105 Interswitch these sensors can be used to simultaneously control lighting thereby reducing both energy and maintenance costs while increasing site security. 3020 10m 30° B A 4010 5m + B A A A _ 5m 0 B A 0 + _B + A _ B B A 5m B 5m + _ B A 10m 0 0 5m 5m 10m 15m 10m 15m 20m 20m 25m 25m 30m 30m 35m 35m 40m (130ft) 40m (130ft) SPECIFICATIONS 30° 0 5m 10m 15m 20m 25m 30m (100ft) 0 5m 10m 15m 20m 25m 30m (100ft) 404 Range LRP 3020 30m x 20m (95’ x 62’) 30 degree arc Range LRP 4010 40m x 10m (125’ x 30’) 20 degree arc Range LRP 404 40m x 4m (125’ x 12’) 5 degree arc Zones LRP 3020 48 dual zones 4 layers of 12 zones Zones LRP 4010 16 dual zones 4 layers of 4 zones Zones LRP 404 16 dual zones 4 layers of 4 zones Supply Voltage 11-16 V DC (12 V nominal) Alarm Contact Form IC Relay 30 V 1-amp Tamper Contact Form 1B 30 V - 1-amp Current Consumption 25mA Walk Test 2 x Led - Visual/Audible Operating Temp. -10ºC - +50ºC (-40°C Heated Version) Weight 500gm Environmental Protection IP65 Appearance Detector White Powder Coat ACCESSORIES LRP 105 - 240 V AC power supply with light sensor and timer for switching 240 V AC loads up to 1200 watts incandescent. LRP 1020 - Audio Walk Tester 5m 0 A 5m 0 5m 5m 10m 15m 10m 20m 25m 20m 30m 35m 30m 40m (130ft) 40m (130’) DIMENSIONS 170 mm 74 mm 160 mm This unit is designed to detect intrusion and initiate a signal to control equipment. It is not a burglar/theft prevention device and we cannot accept responsibility for any losses should they occur. Due to continued improvement specifications are subject to change without prior notice. 400070/Jan 99