CESP-DV 09601-12 - CESP-SP

Nome da Proponente: VIKA CONTROLS COMERCIO DE INSTRUMENTOS E SISTEMAS LTDA.
COMPANHIA ENERGÉTICA DO ESTADO DE SÃO PAULO
LABORATÓRIO DE INSTRUMENTAÇÃO
PREGÃO ELETRÔNICO: Aquisição: No.: 09601/2012
1 - PROPOSTA TÉCNICA
ANEMOMETRO ULTRASSONICO
INVOLUCRO EM TERMOPLASTICO
2 EIXOS:
MEDICAO DE VELOCIDADE DO VENTO: 0 A 60M/S COM ERRO +/-2%,
RESOLUCAO 0.01 M/S E TEMPO DE RESPOSTA <1S. MEDICAO DE
DIRECAO DO VENTO: 0 A 359GR SEM FAIXA MORTA COM ERRO +/3GRAUS, RESOLUCAO 1GRAU E TEMPO DE RESPOSTA <1S
GRAU DE PROTECAO: IP-65
TEMPERATURA DE OPERACAO: -35 A 70°C CELSIUS
UMIDADE DO AR: 5 A 100%
TENSAO DE ALIMENTACAO 12VCC OU 24VCC
DIMENSÕES: 142 X 160 MM
PESO: 0,45 KG
SAÍDAS:
DIGITAIS: RS232/RS422/RS485, NMEA 0183 V3
ANALÓGICAS: 0-5V OU 4-20MA
MODELO: 200-7000-3
FABRICANTE: NOVALYNX
Rua Luis Coelho, 308 – Cj 61/68
CEP: 01309-000 - São Paulo – SP
Tel 11 3159.3674 | Fax 11 3477.1414
www.vikacontrols.com.br
2 – CONDIÇÕES COMERCIAIS
Prazo de entrega: até 30 dias, após o recebimento do Pedido de Compras.
Entrega: Frete por conta da proponente. Almox. 0005 - AV. NOSSA SENHORA DO SABARÁ, 5312 São Paulo/SP
Garantia: Garantimos os equipamentos bem como qualquer dos seus componentes e
acessórios, pelo prazo mínimo de 12 meses a partir da data de ENTREGA. No caso de falhas
durante o período de garantia, efetuaremos reposição imediata dos elementos defeituosos,
sem ônus de qualquer espécie ao CESP/SP.
Preços fixos e irreajustáveis durante a validade da proposta.
Validade da Proposta: 30 dias a contar desta data.
Pagamento: 30 dias após a entrega do material acompanhado de nota fiscal fatura. Via Banco
do Brasil (001) – AG 4055-X / CC 6495-5
Impostos: Totalmente Inclusos NOS PREÇOS OFERTADOS.
São Paulo, 18 de dezembro de 2012.
Atenciosamente,
Julio Prado
Gerente Administrativo
Vika Controls
Rua Luis Coelho, 308 – Cj 61/68
CEP: 01309-000 - São Paulo – SP
Tel 11 3159.3674 | Fax 11 3477.1414
www.vikacontrols.com.br
Wind
200-7000 WindSonic Ultrasonic Anemometer
A lightweight unit, the 200-7000 WindSonic Ultrasonic
Anemometer is of a robust, high strength construction.
Without the need for expensive on-site calibration or
maintenance, and with a corrosion free exterior,
WindSonic is a true fit and forget unit.
The flexible design enables you easily to configure
WindSonic to deliver the information you require. By
using the software provided it is possible to select the
output rate and choose the units of measurement that suit
your application. Ensuring accuracy and reliability,
WindSonic automatically transmits an anemometer status
code with each output to indicate its operating status.
Available in three options, providing a number of
different digital and analog outputs, WindSonic is supplied
with NMEA and RS232 digital output as standard.
Maintenance free, quick and easy to install, WindSonic is
designed to be mounted using a standard pole fitting and
comes complete with all screw fittings, a mating marine
grade connector, and comprehensive user manual.
Providing accurate results in all weather conditions,
WindSonic exhibits a number of distinct advantages:
• Consistent performance throughout life
(no accuracy degradation due to wear of moving parts)
• Corrosion free, UV resistant material
• Low start speed (0.01 m/s, 0.09 knots)
• Maintenance free
• No calibration required
• Robust construction
• Software configurable
• Status code output
• True 0-359° operation (no dead band on direction output)
• Wind speed and direction from a single unit
Ordering Information
200-7000-1
200-7000-2
200-7000-3
200-7000-4
200-7000-00
200-7000-01
200-7000-02
200-7000-03
200-7000-04
330-04TP24
WindSonic Ultrasonic Anemometer
RS232 output
WindSonic Ultrasonic Anemometer
RS232/422/485 output
WindSonic Ultrasonic Anemometer
RS232/422/485 and 0-5V or 4-20 mA output
WindSonic Ultrasonic Anemometer
SDI-12 output
WindSonic Connector Kit, not assembled
9-Pin Serial Connector Kit, not assembled
WindSonic Cable Assembly Fee
WindSonic Mounting Stub
WindSonic Boom Mounting Assy
Signal Cable, per foot
200-7000 WindSonic Ultrasonic Anemometer
Specifications
Outputs
Output 1, 2, or 4 outputs per second
Parameters Wind Speed and Direction or U and V (vectors)
Units of measure m/s, knots, mph, kph, ft/min
Wind Speed
Range 0-134 mph (0-60 m/s)
Accuracy ± 2%
Resolution 0.02 mph (0.01 m/s)
Wind Direction
Range 0 to 359° – no dead band
Accuracy ± 3°
Resolution 1°
Anemometer Status
Message supplied as part of standard output
Power Requirement
Anemometer 9-30 Vdc @ 14.5 mA typical for option 1
Outputs
Option: 1 RS232 (9600 baud)
Option 2: RS232 + RS422 + RS485 (9600 baud) + NMEA*
Option 3: RS232 + RS422 + RS485 + NMEA* + 0-5V or 4-20 mA
Option 4: SDI-12
*NMEA 0183 Version 3
Maximum Recommended Cable Length
RS232: 20' (6.5 m)
RS422/485: 3200' (1 km)
Analog voltage: 20' (6.5 m)
Analog current: resistance dependent, max 250 ohms
Environmental
Moisture Protection IP65
Operating Temperature -31° to +158° F (-35° to +70° C)
Storage Temperature -40° to +194° F (-40° to +90° C)
Operating Humidity < 5% to 100%
EMC
EN 61000-6-2: 2001
EN 61000-6-3: 2001
MTBF: 15 years
Materials: External Construction LURAN S KR 2861/1C ASA/PC
Dimensions
Size 5.6" x 6.3" (142 x 160 mm)
Weight 1 lb (0.45 kg)
Optional Factory Calibration: Traceable to national standards
Mounting: Pipe Mounting 1.75" (44.45 mm) diameter
NovaLynx Corporation PO Box 240 Grass Valley CA 95945
Phone: (530) 823-7185 Fax: (530) 823-8997 USA Toll Free: 1-800-321-3577
www.novalynx.com
55