Functional coatings for clothing articles CHT GROUP
Transcrição
Functional coatings for clothing articles CHT GROUP
CHT GROUP Ralf Zapf Coating Division Marketing Coating Division Functional coatings for clothing articles 1 Functional coatings General requirements •Wash resistance •Wearing comfort •Functionality (working clothes and leisure wear) •Fashionably attractive Marketing Coating Division 2 Functional coatings Differentiation Clothing articles • Working clothes • Leisure wear / sportswear Marketing Coating Division 3 Functional clothing Functions, features • Breathable and water vapour permeable • Water repellent or waterproof • Windproof • Soil repellent and (or) soil release • Worker protection (chemicals, liquid metal, heat, fire, high visibility) • Mosquito protection • Bifunctional wearing comfort Marketing Coating Division 4 Functional clothing Application examples • Outdoor clothing for hiking, backpacking, climbing • Rain jackets, wind jackets • Workwear for: • hotelery, (cooks,waitresses,kitchen, cleaning) • Fire fighters, police, army… • Road construction workers • Laboratory workers • Hospital personal (doctors, nurses…) • Metal foundries Marketing Coating Division • Buisiness clothing 5 Functional clothing Breathable and water vapour permeable • Membrane laminations e.g. LAMETHAN LB 15 T + LAMETHAN ADH-1 • Microporous stable foam coatings with TUBICOAT MP (+ Topcoat TUBICOAT TCW) Tests: ISO 15496 • Water vapour transmission: WVT (g/m²/day) • Water vapour resistance: Re (m² Pa/W) Marketing Coating Division 6 Functional clothing Water repellence or waterproof • Fluorocarbon finishes (only water repellence!) • e.g. with TUBIGUARD 42-AT for PA raincoats • Alternative: FC-free with TUBIGUARD ECO-PHOB • Membrane laminations e.g. LAMETHAN LB 15 T + LAMETHAN ADH-1 • Microporous stable foam coatings with TUBICOAT MP + Topcoat TUBICOAT TCW! • Combined FC finishes with: Marketing Coating Division • Paste coating (not recommended!) • Membrane laminations • Stable foam coating + Topcoat 7 Functional coating Water repellence or waterproof Test methods: • Water drop test AATCC 193 (Teflon / CHT Standard) • Spray test (AATCC 22) • Bundesmann (DIN EN 29865) • Water impermeability (water column acc. to DIN EN 20811) Marketing Coating Division 8 Functional coating Water drop test AATCC 193 Details: • Mixtures of isopropanol & water in different concentrations • 3 drops on the surface of the specimen • In between 10 seconds, no wetting • Grades: W-10 Marketing Coating Division 9 Functional coating Differences in evaluation: Water drop test AATCC 193 Marketing Coating Division Teflon CHT resp. 3M Grade Isopropanol water Grade Isopropanol water 1 2% 98 % W 0% 100 % 2 5% 95 % 1 10 % 90 % 3 10 % 90% 2 20 % 80 % 4 20 % 80 % 3 30 % 70 % 5 30 % 70 % 4 40 % 60 % 6 40 % 60 % 5 50 % 50 % 7 50 % 50 % 6 60 % 40 % 8 60 % 40 % 7 70 % 30 % 8 80 % 20 % 9 90 % 10 % 10 100 % 0% 10 Functional coating Spray test AATCC 22 Details: • 250 ml water • Spray height of 15 cm • Knock-off the specimen • Grades: 0-100 Marketing Coating Division • 0 = complete wetting of both sides • 50 = ISO 1 • 70 = ISO 2 • 80 = ISO 3 • 90 = ISO 4 • 100 = ISO 5 11 Functional coating Windproof • Membrane laminations e.g. LAMETHAN LB 15 T + LAMETHAN ADH-1 • Microporous stable foam coatings with TUBICOAT MP (+ Topcoat TUBICOAT TCW) • Paste coatings Is not recommended! Test: DIN EN ISO 9237 • Air permeability: in L/dm²/min Marketing Coating Division 12 Functional clothing Soil repellent Soil release • Fluorocarbon finishes Conventional FC´s from the TUBIGUARD range (optional as C-6 chemistry -> TG 25-F) for primary protection • Soil release FC finish Secondary protection for optimal soil removal e.g. TUBIGUARD SRO Tests: • Oil drop test AATCC 118 • Water drop test (Teflon/CHT Standard) • Perhaps Tchibo test AATCC 175 Marketing Coating Division 13 Functional clothing • Fluorocarbon finishes Work protection special FC, TUBIGUARD CR for protection against liquid chemicals acc. to DIN EN 368 • Two-layer paste coating with paste compound TUBICOAT MEA (+ FR treatment with APYROL CEP) for liquid metal repellence acc. to DIN EN 373 • Foil lamination With aluminium-steamed PES foil LAMETHAN ALU R 12 with heat-reflecting properties, for heat protection Marketing Coating Division 14 Functional clothing Vector protection Vectors transmit germs from e.g. mosquitoes, ticks, lice etc. • Anti-mosquito protection One-side instable foam coating with TUBICOAT MOP + BEMATIN PER 40 (optionally including Comfort Control Finish!) Application on articles made of cotton or cotton blends. Marketing Coating Division 15 Functional clothing Wearer comfort • Comfort Control Coating One-side application of fluorocarbons to obtain the bi-functional properties of clothing articles. The outside of the fabric becomes water-repellent by the hydrophobic coating. The inside of the fabric, maintains its hydrophilic character and makes humidity be fast absorbed. Marketing Coating Division 16 Functional clothing Comfort Control characteristics • Dry wearing comfort by a rapid drying • Fast humidity absorption • Water repellent and soil repellent front side • No sweat or salt marks • The handle is not affected • High breathability • High wash permanence Marketing Coating Division 17 Functional clothing Comfort Control Application technology • One-sided application by instable foam or paste coating • Knife over air coating (woven fabric) • Screen coating (knit fabrics , also highly elastic fabrics!) • Optional hydrophilisation of fabric inside by foam application with TUBICOAT SOFT-RW Marketing Coating Division 18 Functional coatings for clothing fabrics Thank you for your attention! Marketing Coating Division 19
Documentos relacionados
Others - Concrete Show South America
91% of visitors play a role in the decision-making process
Leia mais