PL ASTITEC FF Crystal
Transcrição
PL ASTITEC FF Crystal
LITERATURE PL ASTITEC FF Crystal PLASTITEC FF Crystal is a primary monomeric plasticizer, produced from renewable vegetal raw materials. Features PLASTITEC FF Crystal is a biodegradable product, with safe handling for the user and for the environment. Applications: PLASTITEC FF Crystal has an excellent power of solvation, being indicated for several applications, among them the plasticization of polyvinyl chloride (PVC), PVA, Epoxy and Polyurethanes, pure or in mixture with other plasticizers and nitrile rubbers. Usual Properties Product Properties Aspect: Oily liquid, Crystal clear Molecular weight: 380 Density @ 20ºC: 0.94 Viscosity, cP@20°C: 18 Humidity, %weight, Max.: 0.5 Acidity – (mg KOH/g), max.: 3,0 Flash Point (sealed container), °C: Vitric Transition Point (tg) > 160°C -30ºC PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br LITERATURE Toxicity PLASTITEC FF Crystal is a plasticizer free from phthalates and nontoxic. It does not have in its composition heavy metals, aromatic solvents or derivatives from phenol. Use Volumes Recommended use varies according to application. In general, it replaces DOP in PVC with approximate reduction of up to 15%. In nitrile rubber it replaces DOP in the same proportion. Packaging May be packed in bulk, in returnable containers of 950Kg and in metallic barrels of 180Kg. Shelf Life 2 years. PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br LITERATURE The information and recommendations contained herein are a service to our customers. However, Proquitec represents that such information and recommendations have been obtained from suitable sources not assuming any liabilities for inappropriate use or for result of misuse of its products. Formulation Products: NBR Nipol 35-5 Zinc Oxide Stearin Protetox NS Liquid DOP DOA PLASTITEC FF Crystal Silica Caulim Precip. Mesh 325 Sulphur MBTS TMTD Total A 100 5.0 0.5 2.0 15.0 10.0 80.0 0.5 1.0 2.0 216 B 100 5.0 0.5 2.0 15.0 10.0 80.0 0.5 1.0 2.0 216 Original Properties Hardness Shore A Resistance to Tension Resistance to Stretching DOP DOA PLASTITEC FF Crystal 55 55 58 94.1 796 91.3 755 101.9 723 DOP DOA PLASTITEC FF Crystal (Points) +5pts +5pts +4pts 2 -7% -20% -11% -15% -10% -12% (Points) 2 (Kgf/cm ) (%) Aging 70 hours at 100ºC Var. Hardness Shore A Var. Resistance to Tension Var. Resistance to Stretching C 100 5.0 0.5 2.0 15.0 10.0 80.0 0.5 1.0 2.0 216 (Kgf/cm ) (%) PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br LITERATURE Test Permanent Deformation by Compression - DPC (deformation at 25%) – ASTM D 395B - 22 hours at 100ºC DOP DOA PLASTITEC FF Crystal +14.83 +12.29 +10.69 Test of Resistance to Oil - ASTM 2 D 573(%) – 70 hours at 100ºC DOP DOA PLASTITEC FF Crystal +1.15 +0.8 +2.88 Resistance Test FUEL A (Gasoline) (%) – 22 hours at Room Temperature DOP DOA PLASTITEC FF Crystal +16.88 +16.5 +18.21 PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br LITERATURE Captions: Note – Sample Performance assessment in PVC Due to the features of its molecular structure the compounds formulated with PLASTITEC FF Crystal have a performance similar to those formulated with DOP even when formulated in lower “pcr”, as shown in the tables below: Formulation PVC Resin PLASTITEC FF Crystal DOP Stabilizer & Lubricator A 1 0 3 0 8 6 . 7 B 100 - - 45 6.7 PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br LITERATURE FREEZING AND MELTING IN TORQUE RHEOMETER Formulation Results Time (min) Torque (N/m) Temperature (ºC) Energy (J) A B Freezing 1.68 43.2 80.3 3.48 x 10E3 Melting 1.94 43.1 88.4 5.23 x 10E3 Freezing 1.63 42.2 81.2 3.02 x 10E3 Melting 2.03 42.9 93.7 5.69 x 10E3 HARDNESS AND SPECIFIC WEIGHT Formulation Hardness Shore A (15 seconds) Specific Weight (g / cm3) A 79.8 +/- 0.3 1.27 B 79.3 +/- 0.4 1.25 Important Note: compounds formulated with 50 pcr, both for PLASTITEC FF Crystal and DOP, present the following results for Hardness and specific weight: Plastitec FF Crystal DOP Hardness Shore A (15 seconds) 65.7 73.2 Specific Weight (g / cm3) 1.2 2 1.2 3 RESISTANCE TO TENSION AND STRETCHING Formulation Breaking tension (Mpa) Stretching (%) A 19.0 +/- 0.2 296 +/- 8 B 17.1 +/- 0.5 333 +/- 12 STATIC THERMAL STABILITY Formulation A B 185 ºC (60') Equivalent for both formulations 200 ºC (60') Formulation A has better stability The information and recommendations contained herein are a service to our customers. However, Proquitec represents that such information and recommendations have been obtained from suitable sources not assuming any liabilities for inappropriate use or for result of misuse of its products. PROQUITEC – Indústria de Produtos Químicos e Representação Comercial S.A. Rua Ifema, 291 – Vargem Grande Paulista – São Paulo/ SP - ZIP 06730-000 Fax: (11) 4158 – 3184 Phone (11) 4158 - 8400 www.proquitec.com.br
Documentos relacionados
emultec ngb
materials. Its advantage in relation to the traditional silicone emulsions is the lower level of greasing of the treated substrate, in addition to reduce its dirtiness.
Leia mais