tank.tech

Registration for the Conference
Conference topics
to [email protected] or by fax to + 49 89 5791-2833
.
tank tech
Conference, November 5 – 6, 2013 in Munich, Germany
Name and Title (if applicable)
.
tank tech
Registration at any time at
Conference
November 5 – 6, 2013
in Munich, Germany
First Name
www.tuev-sued.de/tanktech
[email protected]
Company
Department
VAT No. (mandatory for EU member states excl. Germany)
All information about our conferences
and conventions – quickly and easily with
your smartphone.
Country / Zip Code / City
Phone
Invoice recipient
registration and information
Invoice address
registration fee: 950,00 € plus current VaT
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due
for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of
the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation
of TÜV SÜD Akademie GmbH.
Date
Signature
TÜV SÜD Akademie GmbH
International Conferences
Susanne Zecher
Westendstraße 160
80339 Munich, Germany
Phone +49 89 5791-2846
Fax
+49 89 5791-2833
E-Mail: [email protected]
201701-TankTechEN-fl8-105x210-p-13-06-19 | Photographic material: Dr. Ing. h.c. F. Porsche AG
E-mail
invoice address (if different from above):
The Conference is intended for
OEMs and supplier industries
Component manufacturers and developers
Consulting and engineering companies
Mineral oil industry
Universities, research institutes
Authorities and associations
Committee
Dr. Caroline Born, Ford-Werke GmbH
Dirk Eulitz, Kautex Textron GmbH & Co. KG
Timo Wiedel, Daimler AG
Dr. Günther Požgainer, MAGNA STEYR Fuel Systems GesmbH
Martin Scholz, BMW Group
Martin Stickel, TI Automotive Technology Center GmbH
Dr. Paul Wouters, Inergy Automotive Systems S.A.
Chairman: Walter Geier, TÜV SÜD Automotive GmbH
Street
Data privacy notice: TÜV SÜD Akademie GmbH, Westendstr. 160, 80339 Munich, and its service providers (TÜV
SÜD Akademie) use your personal data to process the booked service. We also inform our business partners via
telephone of our products and services related to training and continuing education as well as personal certification.
If you object to the use of your personal data for advertising or market research purposes or if you wish to revoke
such consent, simply send a brief message by regular mail to TÜV SÜD Akademie GmbH, AKD Datenschutz,
Westendstrasse 160, 80339 Munich, or via e-mail to [email protected].
The conference will be focused on recent trends and product
developments in the field of automotive fuel systems. Vehicle
manufacturers, automotive suppliers, international research units
and the mineral oil industry will participate. As in former years,
the conference tank.tech 2013 will put all important key subjects –
such as environmental requirements, legislation and next generation fuel systems – up for discussion.
Conference languages
German and English (simultaneous translation into English)
ConferenCe priCe and Venue
950,00 € plus current VaT (if applicable)
The registration fee includes conference documentation, lunch
and beverages during breaks as well as the evening event.
Hotel dolce Munich unterschleißheim
Andreas-Danzer-Weg 1, 85716 Unterschleißheim, Germany
You will receive travel and hotel information with the confirmation of your registration.
TÜV SÜD Akademie GmbH
TÜV SÜD Automotive GmbH
Registration for the Conference
Conference topics
to [email protected] or by fax to + 49 89 5791-2833
.
tank tech
Conference, November 5 – 6, 2013 in Munich, Germany
Name and Title (if applicable)
.
tank tech
Registration at any time at
Conference
November 5 – 6, 2013
in Munich, Germany
First Name
www.tuev-sued.de/tanktech
[email protected]
Company
Department
VAT No. (mandatory for EU member states excl. Germany)
All information about our conferences
and conventions – quickly and easily with
your smartphone.
Country / Zip Code / City
Phone
Invoice recipient
registration and information
Invoice address
registration fee: 950,00 € plus current VaT
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due
for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of
the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation
of TÜV SÜD Akademie GmbH.
Date
Signature
TÜV SÜD Akademie GmbH
International Conferences
Susanne Zecher
Westendstraße 160
80339 Munich, Germany
Phone +49 89 5791-2846
Fax
+49 89 5791-2833
E-Mail: [email protected]
201701-TankTechEN-fl8-105x210-p-13-06-19 | Photographic material: Dr. Ing. h.c. F. Porsche AG
E-mail
invoice address (if different from above):
The Conference is intended for
OEMs and supplier industries
Component manufacturers and developers
Consulting and engineering companies
Mineral oil industry
Universities, research institutes
Authorities and associations
Committee
Dr. Caroline Born, Ford-Werke GmbH
Dirk Eulitz, Kautex Textron GmbH & Co. KG
Timo Wiedel, Daimler AG
Dr. Günther Požgainer, MAGNA STEYR Fuel Systems GesmbH
Martin Scholz, BMW Group
Martin Stickel, TI Automotive Technology Center GmbH
Dr. Paul Wouters, Inergy Automotive Systems S.A.
Chairman: Walter Geier, TÜV SÜD Automotive GmbH
Street
Data privacy notice: TÜV SÜD Akademie GmbH, Westendstr. 160, 80339 Munich, and its service providers (TÜV
SÜD Akademie) use your personal data to process the booked service. We also inform our business partners via
telephone of our products and services related to training and continuing education as well as personal certification.
If you object to the use of your personal data for advertising or market research purposes or if you wish to revoke
such consent, simply send a brief message by regular mail to TÜV SÜD Akademie GmbH, AKD Datenschutz,
Westendstrasse 160, 80339 Munich, or via e-mail to [email protected].
The conference will be focused on recent trends and product
developments in the field of automotive fuel systems. Vehicle
manufacturers, automotive suppliers, international research units
and the mineral oil industry will participate. As in former years,
the conference tank.tech 2013 will put all important key subjects –
such as environmental requirements, legislation and next generation fuel systems – up for discussion.
Conference languages
German and English (simultaneous translation into English)
ConferenCe priCe and Venue
950,00 € plus current VaT (if applicable)
The registration fee includes conference documentation, lunch
and beverages during breaks as well as the evening event.
Hotel dolce Munich unterschleißheim
Andreas-Danzer-Weg 1, 85716 Unterschleißheim, Germany
You will receive travel and hotel information with the confirmation of your registration.
TÜV SÜD Akademie GmbH
TÜV SÜD Automotive GmbH
Agenda on November 5
9:45
Agenda on November 6
Welcome
Horst Schneider, Board of Management TÜV SÜD AG,
Germany
14:25
Studies of vehicle fuel system compatibility with mid-level
ethanol blends
Philip A. Yaccarino, General Motors, USA
10:00
Introduction
Walter Geier, TÜV SÜD Automotive GmbH, Germany
14:50
Solutions for fuel and SCR lines
Dr. Thierry Travers, Hutchinson, France
10:05
Future European emission legislation – the impact on
vehicle powertrain and related tank systems
Bernd Fusshoeller, DELPHI
15:15
Coffee break
innovative solutions to meet stricter requirements:
fuel systems
Chair: Dirk Eulitz, Kautex Textron GmbH & Co. KG
10:35
NGCC® (Next Generation Carbon Canister) – the Kautex
solution for high performance carbon canister
Björn Stell, Karsten Danielowski, Carsten Elsasser,
Kautex Textron GmbH & Co. KG, Germany
development methodology from simulation to testing
(part 2)
Chair: Martin Scholz, BMW Group
8:45
9:10
16:00
Active fuel level sensors for improved performance
and reliability
Daniel Moreno, Andreas Frilling, DELPHI
9:35
16:25
11:00
Coffee break
The worldwide supply crisis for PA 12 and the effects for
automobile suppliers und their customers
Werner Zimmer, TI Automotive (Fuldabrück) GmbH,
Germany
11:40
Fuel systems for low purge unit (PHV) and future direction
Masaki Akagi, Shinsuke Kinoshita,
Toyota Motor Corporation, Japan
development methodology from simulation to testing
(part 1)
Chair: Martin Scholz, BMW Group
10:00
10:25
12:05
12:30
14:00
The future of pressurized tanks
Albert Böcker, TI Automotive Technology Center GmbH,
Germany
16:50
Lunch break
17:15
End of the first conference day
innovative solution to meet stricter requirements:
components (part 1)
Chair: Dr. Caroline Born, Ford-Werke GmbH
19:00
Evening event
Major challenges for development of components:
an overview
N.N.
Prediction and auralization of vehicle fuel tank slosh noise
from system level test data
Dr. Pierre De Man, Inergy Automotive Systems S.A., Belgium
12:05
Upcoming emission regulations for Passenger Cars:
Impact on SCR system requirements and developments
Joël Op de Beeck, Inergy Automotive Systems S.A.,
Belgium
12:30
Lunch break
13:45
AdBlue-refueling – a customer-friendly solution
of Mercedes-Benz
Hermann Horrer, Daimler AG, Germany
YAPP New technology fuel tank system
Ye Wang, Dejun Gao, Weidong Su,
YAPP Automotive Parts Co., Ltd., China
Tank weight optimization – a revolution
Peter Britmer, Maria Bertilsson, TechRoi Fuel Systems AB,
Sweden
fuel tank systems for alternative powertrains
Chair: Martin Stickel, TI Automotive Technology
Center GmbH
14:10
The DLR’s modular, shape-adaptable cellular CNG-tank –
validation of a customer-oriented solution
Diego Schierle, Roland Schöll, Prof. Dr. Horst E. Friedrich,
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR),
Germany
14:35
Cryo-compressed hydrogen storage – the next step
to zero emission long range mobility
Dr. Klaas Kunze, BMW Group, Germany
15:05
Outlook and farewell
Walter Geier, TÜV SÜD Automotive GmbH, Germany
15:15
End of the conference
RoboTankWeld: A revolutionary method for plastic welding
of the highest quality with a highly flexible robot system
Thomas Breuer, BF Maschinen GmbH, Germany;
Florian Gottschaller, AUTOLOADER GmbH, Germany
Coffee break
SCr Systems
Chair: Timo Wiedel, Daimler AG
11:10
SCR Tank Injection moulding tanks development
Dr. Matteo Piazzi, Röchling Automotive AG & Co. KG, Italy
Slash noise assessment – posibilities in the pre development
Christoph Schwenk, Kautex Textron GmbH & Co. KG,
Germany
innovative manufacturing and production processes
Chair: Dr. Günther Požgainer, MAGNA STEYR
Fuel Systems GesmbH
innovative solution to meet stricter requirements:
components (part 2)
Chair: Dr. Paul Wouters, Inergy Automotive Systems S.A.
11:40
Better is the enemy of good:
New technologies create new opportunities for tailor-made
HDPE products used in SCR-tanks and PFT
Dr. Bernd Hoécker, Rainer Sattel,
LyondellBasell Industries, Germany
exHibiTion
Take the chance to inform yourself on services and products
of various companies by visiting the exhibition.
Agenda on November 5
9:45
Agenda on November 6
Welcome
Horst Schneider, Board of Management TÜV SÜD AG,
Germany
14:25
Studies of vehicle fuel system compatibility with mid-level
ethanol blends
Philip A. Yaccarino, General Motors, USA
10:00
Introduction
Walter Geier, TÜV SÜD Automotive GmbH, Germany
14:50
Solutions for fuel and SCR lines
Dr. Thierry Travers, Hutchinson, France
10:05
Future European emission legislation – the impact on
vehicle powertrain and related tank systems
Bernd Fusshoeller, DELPHI
15:15
Coffee break
innovative solutions to meet stricter requirements:
fuel systems
Chair: Dirk Eulitz, Kautex Textron GmbH & Co. KG
10:35
NGCC® (Next Generation Carbon Canister) – the Kautex
solution for high performance carbon canister
Björn Stell, Karsten Danielowski, Carsten Elsasser,
Kautex Textron GmbH & Co. KG, Germany
development methodology from simulation to testing
(part 2)
Chair: Martin Scholz, BMW Group
8:45
9:10
16:00
Active fuel level sensors for improved performance
and reliability
Daniel Moreno, Andreas Frilling, DELPHI
9:35
16:25
11:00
Coffee break
The worldwide supply crisis for PA 12 and the effects for
automobile suppliers und their customers
Werner Zimmer, TI Automotive (Fuldabrück) GmbH,
Germany
11:40
Fuel systems for low purge unit (PHV) and future direction
Masaki Akagi, Shinsuke Kinoshita,
Toyota Motor Corporation, Japan
development methodology from simulation to testing
(part 1)
Chair: Martin Scholz, BMW Group
10:00
10:25
12:05
12:30
14:00
The future of pressurized tanks
Albert Böcker, TI Automotive Technology Center GmbH,
Germany
16:50
Lunch break
17:15
End of the first conference day
innovative solution to meet stricter requirements:
components (part 1)
Chair: Dr. Caroline Born, Ford-Werke GmbH
19:00
Evening event
Major challenges for development of components:
an overview
N.N.
Prediction and auralization of vehicle fuel tank slosh noise
from system level test data
Dr. Pierre De Man, Inergy Automotive Systems S.A., Belgium
12:05
Upcoming emission regulations for Passenger Cars:
Impact on SCR system requirements and developments
Joël Op de Beeck, Inergy Automotive Systems S.A.,
Belgium
12:30
Lunch break
13:45
AdBlue-refueling – a customer-friendly solution
of Mercedes-Benz
Hermann Horrer, Daimler AG, Germany
YAPP New technology fuel tank system
Ye Wang, Dejun Gao, Weidong Su,
YAPP Automotive Parts Co., Ltd., China
Tank weight optimization – a revolution
Peter Britmer, Maria Bertilsson, TechRoi Fuel Systems AB,
Sweden
fuel tank systems for alternative powertrains
Chair: Martin Stickel, TI Automotive Technology
Center GmbH
14:10
The DLR’s modular, shape-adaptable cellular CNG-tank –
validation of a customer-oriented solution
Diego Schierle, Roland Schöll, Prof. Dr. Horst E. Friedrich,
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR),
Germany
14:35
Cryo-compressed hydrogen storage – the next step
to zero emission long range mobility
Dr. Klaas Kunze, BMW Group, Germany
15:05
Outlook and farewell
Walter Geier, TÜV SÜD Automotive GmbH, Germany
15:15
End of the conference
RoboTankWeld: A revolutionary method for plastic welding
of the highest quality with a highly flexible robot system
Thomas Breuer, BF Maschinen GmbH, Germany;
Florian Gottschaller, AUTOLOADER GmbH, Germany
Coffee break
SCr Systems
Chair: Timo Wiedel, Daimler AG
11:10
SCR Tank Injection moulding tanks development
Dr. Matteo Piazzi, Röchling Automotive AG & Co. KG, Italy
Slash noise assessment – posibilities in the pre development
Christoph Schwenk, Kautex Textron GmbH & Co. KG,
Germany
innovative manufacturing and production processes
Chair: Dr. Günther Požgainer, MAGNA STEYR
Fuel Systems GesmbH
innovative solution to meet stricter requirements:
components (part 2)
Chair: Dr. Paul Wouters, Inergy Automotive Systems S.A.
11:40
Better is the enemy of good:
New technologies create new opportunities for tailor-made
HDPE products used in SCR-tanks and PFT
Dr. Bernd Hoécker, Rainer Sattel,
LyondellBasell Industries, Germany
exHibiTion
Take the chance to inform yourself on services and products
of various companies by visiting the exhibition.
Registration for the Conference
Conference topics
to [email protected] or by fax to + 49 89 5791-2833
.
tank tech
Conference, November 5 – 6, 2013 in Munich, Germany
Name and Title (if applicable)
.
tank tech
Registration at any time at
Conference
November 5 – 6, 2013
in Munich, Germany
First Name
www.tuev-sued.de/tanktech
[email protected]
Company
Department
VAT No. (mandatory for EU member states excl. Germany)
All information about our conferences
and conventions – quickly and easily with
your smartphone.
Country / Zip Code / City
Phone
Invoice recipient
registration and information
Invoice address
registration fee: 950,00 € plus current VaT
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due
for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of
the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation
of TÜV SÜD Akademie GmbH.
Date
Signature
TÜV SÜD Akademie GmbH
International Conferences
Susanne Zecher
Westendstraße 160
80339 Munich, Germany
Phone +49 89 5791-2846
Fax
+49 89 5791-2833
E-Mail: [email protected]
201701-TankTechEN-fl8-105x210-p-13-06-19 | Photographic material: Dr. Ing. h.c. F. Porsche AG
E-mail
invoice address (if different from above):
The Conference is intended for
OEMs and supplier industries
Component manufacturers and developers
Consulting and engineering companies
Mineral oil industry
Universities, research institutes
Authorities and associations
Committee
Dr. Caroline Born, Ford-Werke GmbH
Dirk Eulitz, Kautex Textron GmbH & Co. KG
Timo Wiedel, Daimler AG
Dr. Günther Požgainer, MAGNA STEYR Fuel Systems GesmbH
Martin Scholz, BMW Group
Martin Stickel, TI Automotive Technology Center GmbH
Dr. Paul Wouters, Inergy Automotive Systems S.A.
Chairman: Walter Geier, TÜV SÜD Automotive GmbH
Street
Data privacy notice: TÜV SÜD Akademie GmbH, Westendstr. 160, 80339 Munich, and its service providers (TÜV
SÜD Akademie) use your personal data to process the booked service. We also inform our business partners via
telephone of our products and services related to training and continuing education as well as personal certification.
If you object to the use of your personal data for advertising or market research purposes or if you wish to revoke
such consent, simply send a brief message by regular mail to TÜV SÜD Akademie GmbH, AKD Datenschutz,
Westendstrasse 160, 80339 Munich, or via e-mail to [email protected].
The conference will be focused on recent trends and product
developments in the field of automotive fuel systems. Vehicle
manufacturers, automotive suppliers, international research units
and the mineral oil industry will participate. As in former years,
the conference tank.tech 2013 will put all important key subjects –
such as environmental requirements, legislation and next generation fuel systems – up for discussion.
Conference languages
German and English (simultaneous translation into English)
ConferenCe priCe and Venue
950,00 € plus current VaT (if applicable)
The registration fee includes conference documentation, lunch
and beverages during breaks as well as the evening event.
Hotel dolce Munich unterschleißheim
Andreas-Danzer-Weg 1, 85716 Unterschleißheim, Germany
You will receive travel and hotel information with the confirmation of your registration.
TÜV SÜD Akademie GmbH
TÜV SÜD Automotive GmbH
Registration for the Conference
Conference topics
to [email protected] or by fax to + 49 89 5791-2833
.
tank tech
Conference, November 5 – 6, 2013 in Munich, Germany
Name and Title (if applicable)
.
tank tech
Registration at any time at
Conference
November 5 – 6, 2013
in Munich, Germany
First Name
www.tuev-sued.de/tanktech
[email protected]
Company
Department
VAT No. (mandatory for EU member states excl. Germany)
All information about our conferences
and conventions – quickly and easily with
your smartphone.
Country / Zip Code / City
Phone
Invoice recipient
registration and information
Invoice address
registration fee: 950,00 € plus current VaT
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due
for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of
the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation
of TÜV SÜD Akademie GmbH.
Date
Signature
TÜV SÜD Akademie GmbH
International Conferences
Susanne Zecher
Westendstraße 160
80339 Munich, Germany
Phone +49 89 5791-2846
Fax
+49 89 5791-2833
E-Mail: [email protected]
201701-TankTechEN-fl8-105x210-p-13-06-19 | Photographic material: Dr. Ing. h.c. F. Porsche AG
E-mail
invoice address (if different from above):
The Conference is intended for
OEMs and supplier industries
Component manufacturers and developers
Consulting and engineering companies
Mineral oil industry
Universities, research institutes
Authorities and associations
Committee
Dr. Caroline Born, Ford-Werke GmbH
Dirk Eulitz, Kautex Textron GmbH & Co. KG
Timo Wiedel, Daimler AG
Dr. Günther Požgainer, MAGNA STEYR Fuel Systems GesmbH
Martin Scholz, BMW Group
Martin Stickel, TI Automotive Technology Center GmbH
Dr. Paul Wouters, Inergy Automotive Systems S.A.
Chairman: Walter Geier, TÜV SÜD Automotive GmbH
Street
Data privacy notice: TÜV SÜD Akademie GmbH, Westendstr. 160, 80339 Munich, and its service providers (TÜV
SÜD Akademie) use your personal data to process the booked service. We also inform our business partners via
telephone of our products and services related to training and continuing education as well as personal certification.
If you object to the use of your personal data for advertising or market research purposes or if you wish to revoke
such consent, simply send a brief message by regular mail to TÜV SÜD Akademie GmbH, AKD Datenschutz,
Westendstrasse 160, 80339 Munich, or via e-mail to [email protected].
The conference will be focused on recent trends and product
developments in the field of automotive fuel systems. Vehicle
manufacturers, automotive suppliers, international research units
and the mineral oil industry will participate. As in former years,
the conference tank.tech 2013 will put all important key subjects –
such as environmental requirements, legislation and next generation fuel systems – up for discussion.
Conference languages
German and English (simultaneous translation into English)
ConferenCe priCe and Venue
950,00 € plus current VaT (if applicable)
The registration fee includes conference documentation, lunch
and beverages during breaks as well as the evening event.
Hotel dolce Munich unterschleißheim
Andreas-Danzer-Weg 1, 85716 Unterschleißheim, Germany
You will receive travel and hotel information with the confirmation of your registration.
TÜV SÜD Akademie GmbH
TÜV SÜD Automotive GmbH