docabrasiv-water jet cutting ter jet cutting ter jet cutting
download 
Denúncia Transcrição
abrasiv-water jet cutting ter jet cutting ter jet cutting
manufacturing process: cutting ABRASIVABRASIV-WATER WATER JET CUTTING TECHNISCHE DATEN BYSTRONIC BYJET PRO L BYSTRONIC BYJET 4022 BYSTRONIC BYJET 3015 Water jet cutting machine W5 Water jet cutting machine W3 Water jet cutting machine W2 workspace (X x Y x Z) 8‘000 x 3‘000 x 100 mm 4‘000 x 2‘200 x 100 mm 3‘000 x 1‘500 x 100 mm Material thickness maximal 200/100 mm 180/100 mm 180/100 mm Number of heads 4 2 2 Maschinentolerance VDI 3441 +/- 0.05 mm/m +/- 0.1 mm/m +/- 0.1 mm/m Workpiece weight maximal 790 kg/m2 1‘800 kg 1‘800 kg Head gap cutting heads 220 – 1‘500 mm 330 – 1‘000 mm 300 – 750 mm Kerf with 0.8 – 1.0 mm 0.7 mm 0.7 mm Cutting pressure 3‘600 bar 3‘500 bar 3‘500 bar Positional deviation +/- 0.08 mm/m +/-0.1 mm/m +/-0.1 mm/m Repetition tolerance +/- 0.025 mm/m +/- 0.1 mm/m +/- 0.1 mm/m programmable lanes mass minimal 0.01 mm minimal 0.01 mm minimal 0.01 mm Cut angle error 0 - 3° 0 - 3° 0 - 3° Best cut kindness Ra 6.3 (Ra 12.5) Ra 6.3 (Ra 12.5) Ra 6.3 (Ra 12.5) Kst/Metal Hole diameter minimal 1 mm 1 mm 1 mm Sidewalk width minimal up to 1/20 der Materialstärke up to 1/20 der Materialstärke up to 1/20 der Materialstärke Material diversity Soft- und Hartstoffe beliebig Hartstoffe beliebig Hartstoffe beliebig Thermal influences / delay no no no microstructure changes at cutting not available not available not available cracking becaus eof thermal Ind. not available not available not available burr none to very low none to very low none to very low engraving/label possible yes yes yes edge CONTACT For more information please contact: Verwo AG I 8864 Reichenburg I 055 415 84 84 I [email protected] I www.verwo.com Specially coated sheets editable Yes, both sides Yes, both sides (drill 1. hole) Yes, both sides (drill 1. hole) cut multilayered possible Yes, even thin materials Yes, even thin materials Yes, even thin materials Komplex geometries parts possible possible possible Startposition any schedule yes, composite material and yes, composite material and yes, composite material and Laminates Laminates Laminates Material Abrasiv-Quality-cut Abrasiv-Schrupp-cut Stainless steel up to 30mm up to 90 mm Structural steel up to 30 mm up to 90 mm MATERIALS Tool steel up to 30 mm up to 90 mm Aluminium up to 40 mm up to 90 mm copper up to 30 mm up to 90 mm brass up to 30 mm up to 90 mm Bronze up to 30 mm up to 90 mm Titanium up to 30 mm up to 90 mm plastics (Thermoplaste) up to 50 mm up to 100 mm Duroplaste up to 50 mm up to 100 mm Laminates up to 50 mm up to 100 mm wood up to 50 mm up to 100 mm Elastomere up to 50 mm up to 100 mm Nature-and plasticstone up to 40 mm up to 100 mm ceramics up to 40 mm up to 100 mm Composite materials up to 40 mm up to 100 mm glass- and Specail material up to 40 mm up to 100 mm BENEFITS AND OTHER MACHINES + For laser materials, which are too thick for lasering + Thin web wides or little bore diameter + Compatible with almost all hard materials and Metal + Specific cut through thick and thin + No action of heat – specially compatible for materials, which react sensitive on heat influence CONTACT For more information please contact: Verwo AG I 8864 Reichenburg I 055 415 84 84 I [email protected] I www.verwo.com
