- Synthopol Chemie

LIOCRYL XAM
2867
(provisional technical data sheet)
Characteristics:
aqueous pure acrylic emulsion, self crosslinking, solvent- and plasticiser-free
Supplied as:
57% in water
Properties:
non-volatile content
(as supplied)
(in-house method AV-F-F003)
57 +/- 1 %
viscosity in mPas
(as supplied)
(in-house method AV-F-V005)
20-500
pH-value
(as supplied)
(in-house method AV-F-P001)
2,5-6,0
minimum film-forming temperature in °C
appr. 5
density in g/cm³
(in-house method AV-F-D001)
appr. 1,03
emulsifier system
anionic
Properties and fields
of use:
Liocryl XAM 2867 is particularly suitable for thermosetting coatings. Drying above the minimum
film-forming temperature leaves a clear, colourless film. In order to obtain complete
crosslinkage, additional heat treatment is required. The drying process must guarantee
adequate crosslinkage of the polymer, i. e. after evaporation of the water, the material must
reach a temperature between 130 and 160 °C for a short period.
Storage:
The emulsion is preserved for storage and contains no alkyl phenol ethoxylates (APEO’s).
The emulsion should be stored in tightly closed, corrosion-resistant containers, protected from
frost and away from direct sunlight, at +5 to +25°C.
Issued: 05/2007-1
Alter Postweg 35
D-21614 Buxtehude
www.synthopol.com
Page 1 / 1
Tel.: +49 (0) 41 61 / 70 71-0
Fax: +49 (0) 41 61 / 80 130
[email protected]
SYNTHOPOL CHEMIE Dr. rer. pol Koch GmbH & Co. KG
Registergericht Tostedt HRA 120303
Persönlich haftende Gesellschafterin
Synthopol Chemie Dr. Koch Verwaltungs GmbH
Registergericht Tostedt HRB 120571
Geschäftsführung:
Dr. Henning Ziemer
(Sprecher der Geschäftsführung)
Hubert Starzonek
Dr. Günter Koch
All data is given to the best of our knowledge, for the purposes of information and advice. No claims of any kind – including in respect of patent rights – can be inferred herefrom.