Crystalline silicon PV module production
Transcrição
Crystalline silicon PV module production
Prozessorientierte Basisdaten für Umweltmanagement-Instrumente Crystalline silicon PV module production 1. Allgemeine Informationen 1.1 Beschreibung 1.2 Referenzen 1.3 Projektspezifika 1.4 Weitere Metadaten 1.5 Technische Kennwerte 2. Inputs/Outputs 3. Umweltaspekte 3.1 Ressourcen 3.2 Luftemissionen 3.3 Gewässereinleitungen 3.4 Abfälle Seite 1 Prozessorientierte Basisdaten für Umweltmanagement-Instrumente 1. Allgemeine Informationen 1.1 Beschreibung This set of Environmental Life Cycle Inventory data was collected by Mariska De Wild and Erik Alsema, in the framework of the CrystalClear research project. The CrystalClear project was funded by the European Commission under contract nr. SES6-CT_2003-502583. More information on this project can found at: http://www.ipcrystalclear.info. More information on the collection and preparation of these data, as well as updates of the dataset can be found at: http://www.ecn.nl/en/zon/products-services/environmental-portal. Technology: Mixed data Representativeness: Average from 2 companies + literature data Collection method: Data collection by factory representatives and literature data Comment: Only materials and energy use for module lamination and further assembly. Typical total area (excluding frame) efficiencies are 14.0% for mono-Si modules, 13.2% for multi-Si modules and 11.2% for ribbon-Si modules. Allocation rules: NA Module parameters: Number of cells, width: 6 Number of cells, length: 12 Cell size (length): 12,5 cm Cell area factor: 1,00 Cell efficiency (encapsulated): 14,7% Module width (w/o frame): 80 cm Module lenght (w/o frame): 156 cm Module area (w/o frame): 1,25 m2 Module perimeter (=frame length): 4,72 m Number of cells: 72 Module power: 165 Wp Module efficiency (glass area, excl. frame): 13,2% Notes: Input of dissolved chemicals follows convention applied in Ecoinvent database: Input and output data for chemicals production refer to its active substance, but the carrier substance is stated in the name and considered as an input in the inventory. Thus the inventory for 1 kg "sodium hydroxide, 50% in H2O, production mix, at plant" refers to the production of 2 kg NaOH with a water content of 50% (i.e., 1 kg pure NaOH plus 1 kg pure H2O). 1.2 Referenzen #1 M.J. de Wild-Scholten, E.A. Alsema: Environmental Life Cycle Inventory of Crystalline Silicon Photovoltaic Module Production, Proceedings of the Materials Research Society Fall 2005 Meeting, Symposium G, Boston, USA, 28-30 November 2005, online publication at: www.mrs.org 1.3 Projektspezifika crystalclear 1.4 Weitere Metadaten Quelle CrystalClear Project Projekte Bearbeitet durch - Datensatzprüfung Kein Review Ortsbezug Western Europe Zeitbezug 2004 Seite 2 Prozessorientierte Basisdaten für Umweltmanagement-Instrumente 1.5 Technische Kennwerte Funktionelle Einheit 1 pc Module, c-Si Seite 3 Prozessorientierte Basisdaten für Umweltmanagement-Instrumente 2. Inputs/Outputs Inputs - Aufwendungen für den Prozess Produkt aus Vorprozess Menge Einheit Aluminium profile Lieferant nicht in Datenbank 3,78 kg Back foil, for solar cell module Lieferant nicht in Datenbank 0,325 kg Cardboard Lieferant nicht in Datenbank 1,37 kg Copper Lieferant nicht in Datenbank 0,135 kg Electricity, medium voltage Lieferant nicht in Datenbank 8,33 kWh Ethyl Vinyl Acetate Lieferant nicht in Datenbank 1,27 kg Glass sheet, low iron, tempered Lieferant nicht in Datenbank 11,4 kg Lead Lieferant nicht in Datenbank 0,00378 kg Methanol Lieferant nicht in Datenbank 0,0162 Nickel Lieferant nicht in Datenbank 0,000201kg Polyphenylenoxid Lieferant nicht in Datenbank 0,2 Silicone Lieferant nicht in Datenbank 0,00295 kg Silicone kit Lieferant nicht in Datenbank 0,15 kg Solar cells Lieferant nicht in Datenbank 73,4 pc Soldering flux Lieferant nicht in Datenbank 0,01 kg Tap water Lieferant nicht in Datenbank 27 kg Tin Lieferant nicht in Datenbank 0,00685 kg kg kg Outputs Input Menge Einheit Module, c-Si 1 pc Seite 4 Prozessorientierte Basisdaten für Umweltmanagement-Instrumente 3. Umweltaspekte 3.2 Luftemissionen Name Menge Einheit Name Menge Einheit Back foil, to waste incineration 0,0227 kg Ethylvinylacetate, foil, to waste incineration 0,0509 kg Solar cells waste 0,0147 kg Solar glass, low-iron, to recycling 0,114 kg 3.4 Abfälle Seite 5