Untitled - KS
Transcrição
Untitled - KS
DE EN Spezial-Steckschlüssel für Blattfederbolzen, Profil Flach/ Oval SW 34x56mm Nutmutternschlüssel Scania mit 4 Zapfen •mit 3/4“ Antriebsvierkant nach DIN 3121 / ISO 1174 •drehmomentgenauer Anzug möglich •Spezialprofil mit 4 innenliegenden Zapfen •massive Ausführung •für Maschinenbetätigung •Spezialstahl Anwendungsgebiete: Scania Kardanwellenflansch an Getriebe und HA (z.B. Wechsel des Simmerrings) 450.0235 7,0 64,0 4 82,0 70,0 19,0 65,0 1,24 Spezial-Steckschlüssel für Blattfederbolzen, Profil Flach/ Oval •mit 3/4" Antriebvierkant •Schlüsselprofil Flach-Oval •weitestgehend wird ein Abrutschen vermieden •heraus gefrästes Profil •robuste Ausführung •Antrieb wahlweise über Schlagschrauber oder Drehmomentschlüssel •Spezialstahl Anwendungsgebiete: Scania, geeignet für die De- und Montage von Blattfederbolzen an Vorderachsen 450.0225 28 54,0 12,0 50,0 420 Spezial-Steckschlüssel für Blattfederbolzen, Profil Flach/ Oval, SW 34x46mm •mit 3/4" Antriebsvierkant •Schlüsselprofil Flach-Oval •weitestgehend wird ein Abrutschen vermieden •heraus gefrästes Profil •robuste Ausführung •Antrieb wahlweise über Schlagschrauber oder Drehmomentschlüssel •Spezialstahl 92 34 64,0 12,0 50,0 Anwendungsgebiete: Scania, geeignet für die De- und Montage von Blattfederbolzen an Hinterachsen jüngeren Baujahrs 450.0227 34 64,0 12,0 50,0 765 625 •mit 3/4“ Antriebvierkant •8-kant Schlüsselprofil •sicheres Aufnehmen der Achsmutter •weitestgehend wird ein Abrutschen vermieden •heraus gefrästes Profil •robuste Ausführung •Antrieb wahlweise über Schlagschrauber oder Drehmomentschlüssel •Spezialstahl Anwendungsgebiete: z.B. Volvo Achsmutter bzw. Staub/ Fettkappe FM und FH VA (450Nm) 450.0241 115 138,0 45,0 80,0 2,76 Achsmutternschlüssel Steckschlüssel für VA-Blattfederbolzen, Volvo, 2 Zapfen •mit 3/4“ Antriebvierkant •6-kant Schlüsselprofil •schlanke Bauform •robuste Ausführung •sicheres Aufnehmen der Achsmutter •weitestgehend wird ein Abrutschen vermieden •heraus gefrästes Profil •Antrieb wahlweise über Schlagschrauber oder Drehmomentschlüssel •Spezialstahl •mit 6-kant-Antrieb SW 27 •drehmomentgenauer Anzug •mit 2 außenliegenden Zapfen, Ø 8,7 mm •massive Ausführung •für Maschinenbetätigung •Spezialstahl Anwendungen: Volvo z.B. FL6 / F10 / F12 Anwendungsgebiete: Achsmutter Volvo FH VA Abdeckung, Achsschenkelbolzen (z.B. FM 12) 450.0245 80 100,0 17,0 55,0 1,30 Anwendungsgebiete: SW 85, MB Actros, Scania, Rockinger, SAF, SW 90, Fiat Eurocargo 4x4, SW 95, MB Actros, Iveco, Fiat, Volvo, SW 105, DAF, Kässbohrer, Setra, Fiat, Volvo, SW110, Fruehauf, SW 115, DAF, Ford Transcontinental, SW 120, DAF, Scania, SAF etc. 911.1089 105,0 140,0 450.0242 27 37,0 2 31,5 160 Steckschlüssel für VA-Blattfederbolzen, Volvo, Profil Flach-Oval SW 28,5 mm Sechskant-Stecknuss, kurz •6-kant •kurze Ausführung •robuste Ausführung •phosphatiert •Chrom-Molybdän Anwendungsgebiete: Scania, geeignet für die De- und Montage von Blattfederbolzen an Hinterachsen älteren Baujahrs 450.0226 •mit 3/4" Antriebsvierkant •Schlüsselprofil Flach-Oval •weitestgehend wird ein Abrutschen vermieden •heraus gefrästes Profil •robuste Ausführung •Antrieb wahlweise über Schlagschrauber oder Drehmomentschlüssel •Spezialstahl Radkapsel- und Achsmutterschlüssel 71,0 40,0 3,23 •mit 3/4" Antriebvierkant •drehmomentgenauer Anzug •Schlüsselprofil Flach-Oval •massive Ausführung •für Maschinenbetätigung •Chrom Molybdän Anwendungen: Volvo Hinterachse z.B. FH, De- und Montage von Blattfederbolzen am Federgehänge 450.0243 28,5 3/4“ 62,0 22,0 60,0 800 Special socket for leaf spring bolts, profile flat/oval SW 34x56mm Groove nut socket Scania with 4 studs •With 3/4“ square drive to DIN 3121 / ISO 1174 •Suitable for exact torque possible •Special profile with 4 internal studs •Extremely versatile •For machinery usage •Special steel Application range: Scania transmission flange shafts on transmission and rear axle (e.g. change fo simmerrings) 450.0235 7.0 64.0 4 82.0 70.0 19.0 65.0 1.24 •With 3/4" square drive •Socket profile flat oval •Any extensive slipping is avoided •Milled out profile •Robust execution •Can be used with an impact wrench or torque wrench •Special steel Application range: Scania, suitable for removal and installation of leaf spring bolts on the rear axles of younger year of construction 450.0227 34 64.0 12.0 50.0 765 Wheel cap and axle nut socket •With 3/4" drive •8 point socket profile •Positive drive of the axle nut •Any extensive slipping is avoided •Milled out profile •Robust execution •Can be used with an impact wrench or torque wrench •Special steel Application range: e.g. Volvo axle nut / dust grease caps FM and FH VA (450Nm) 450.0241 115 138.0 45.0 80.0 2.76 Special socket for leaf spring bolts, profile flat/oval Axle nut socket Socket for front rear leaf spring bolts, Volvo, 2 studs •With 3/4" drive •Socket profile flat oval •Any extensive slipping is avoided •Milled out profile •Robust execution •Can be used with an impact wrench or torque wrench •Special steel •With 3/4" drive •6 point socket profile •Slim design •Robust execution •Positive drive of the axle nut •Any extensive slipping is avoided •Milled out profile •Can be used with an impact wrench or torque wrench •Special steel •With 6 point drive SW 27 •Suitable for exact torque •With 2 external studs Ø 8.7 mm •Extremely versatile •For machinery usage •Special steel Application range: Scania, suitable for removal and installation of leaf spring bolts on the front axles 450.0225 28 54.0 12.0 50.0 420 Special socket for leaf spring bolts, profile flat/oval SW 34x46mm •With 3/4" square drive •Socket profile flat oval •Any extensive slipping is avoided •Milled out profile •Robust execution •Can be used with an impact wrench or torque wrench •Special steel Application range: Scania, suitable for removal and installation of leaf spring bolts on the rear axles of older year of construction 450.0226 92 34 64.0 12.0 50.0 625 Application: Volvo e.g. FL6 / F10 / F12 Application range: Axle nut Volvo FH front axle cover, steering pin (e.g. FM 12) 450.0245 80 100.0 17.0 55.0 1.30 •6 point •Short execution •Robust execution •Phosphate finish •Chrome molybdenum Application range: SW 85, MB Actros, Scania, Rockinger, SAF, SW 90, Fiat Eurocargo 4x4, SW 95, MB Actros, Iveco, Fiat, Volvo, SW 105, DAF, Kässbohrer, Setra, Fiat, Volvo, SW110, Fruehauf, SW 115, DAF, Ford Transcontinental, SW 120, DAF, Scania, SAF etc. 105,0 140.0 27 37.0 2 31.5 160 Socket for front rear leaf spring bolts, Volvo, profile flat oval SW 28.5 mm Hexagonal socket, short 911.1089 450.0242 71.0 40.0 3.23 •With 3/4" drive •Suitable for exact torque •Socket profile flat oval •Extremely versatile •For machinery usage •Chrome molybdenum Application: Volvo rear axle e.g. FH, for removal and installation of leaf spring bolts on the springs 450.0243 28,5 3/4“ 62.0 22.0 60.0 800