3200 to 4700 - EMI shielding tape selection

3200 to 4700 - EMI shielding tape selection
Many EMI problems can be solved easily by the use of conductive tapes. Some of the
most commonly used materials are Mu-copper foil, reinforced Amucor foil and highly
conductive textile.
All of theses materials can be produced with or without (conductive) self-adhesive and an
optional insulation layer.
In addition, all tapes can be cut according to CAD drawing in any desired shape, width
and length.
Shielding performance of different tapes
Field Frequency Mu-copper tape
E
E
E
E
P
P
1 MHz
10 MHz
100 MHz
400 MHz
1 GHz
10 GHz
0.12 mm thick
125 dB
101 dB
120 dB
115 dB
110 dB
120 dB
Amucor
Conductive textile tape
tape
0.04 mm
thick
121 dB
110 dB
103 dB
98 dB
92 dB
85 dB
0.10 mm thick
115 dB
108 dB
102 dB
92 dB
90 dB
80 dB
Mu-ferro tape
Developed for low-frequency (LF) magnetic field shielding
These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.
EMI shielding tapes (Select one of the EMI shielding tapes below to continue)
3200 series
Mu-copper tapes
Mu-copper tape has superb shielding performance (also at low frequencies), can be soldered and can easily be folded in the right
shape.
4700 series
Amucor tapes
1
Revision date: 29-02-2016
Infratron GmbH Produktion und Vertrieb · Am Schnepfenweg 34 · D-80995 München
Tel.: 089/158 126-0 · Fax: 089/158 126-99 · www.infratron.de · e-mail: [email protected]
Produkt anfragen
3200 to 4700 - EMI shielding tape selection
Reinforced Amucor tape is both cost-effective and heat resistant. This thin foil tape can be applied easily to any surface or
housing shape.
4711 - 4715
Conductive textile tapes
Conductive textile tape with self adhesive can be applied easily to plastic housings to cover complex forms and shapes.
3208
Mu-ferro tapes
Mu-ferro tape has been developed for low-frequency (LF) magnetic field shielding.
2
3203
Aluminum tapes
Revision date: 29-02-2016
Infratron GmbH Produktion und Vertrieb · Am Schnepfenweg 34 · D-80995 München
Tel.: 089/158 126-0 · Fax: 089/158 126-99 · www.infratron.de · e-mail: [email protected]
Produkt anfragen
3200 to 4700 - EMI shielding tape selection
Aluminum tape is developed espacially for EMI/RFI shielding/screening in aluminum housings and frames to prevent galvanic
corrosion.
3204 3304
Contact surface tape
A metal tape with a highly conductive- or standard self-adhesive on one side and masking tape on the other side. Used to have a
contact surface after coating a metal case.
3205
Mounting tape
3
A double-sided self-adhesive transfer tape for mounting purposes. After the removal of the release liner, there only remains a
thin layer of electrically conductive adhesive.
Revision date: 29-02-2016
Infratron GmbH Produktion und Vertrieb · Am Schnepfenweg 34 · D-80995 München
Tel.: 089/158 126-0 · Fax: 089/158 126-99 · www.infratron.de · e-mail: [email protected]
Produkt anfragen