Innovation Policy Report - August 2014 (PDF 202KB)

Transcrição

Innovation Policy Report - August 2014 (PDF 202KB)
Innovation Policy Report
August 2014
Table of Contents
Developments in strategy and policy .................................................................................... 2
Australian Government: Entrepreneurs’ Infrastructure Programme ....................................................................... 2
Crowd Sourced Equity Funding ............................................................................................................................ 3
Australian Government: Changes to the R&D Tax Incentive ................................................................................. 4
New CSIRO operating arrangements ................................................................................................................... 4
BlueScope develop new integrated solar roofing system. ..................................................................................... 5
NSW: Agriculture Industry Action Plan .................................................................................................................. 5
NSW: Minerals Industry Action Plan ..................................................................................................................... 6
NSW: Easy Access Intellectual Property Update .................................................................................................. 6
NSW: Smart Work Hubs ....................................................................................................................................... 6
Ireland: Smart Futures programme ....................................................................................................................... 6
US: $100m for 32 Energy Frontier Research Centers ........................................................................................... 6
US Cluster Mapping Website ................................................................................................................................ 7
US: Collaborate on pilot innovation corps activity.................................................................................................. 7
US: Incubators for Clean Technology Ventures .................................................................................................... 7
Developments in funding programmes ................................................................................. 8
Australian Government: $155 million Growth Fund ............................................................................................... 8
Australian Government: Manufacturing Transition Programme ............................................................................. 8
Australian Government: Trade Support Loans Programme ................................................................................... 9
Australia SKA Pathfinder (ASKAP) radio telescope: First images ....................................................................... 10
Supercritical solar - new frontier for power generation ........................................................................................ 10
Opening of the Biosecure Immunology Laboratory ............................................................................................. 10
NSW: Design-Led Innovation.............................................................................................................................. 11
NSW: Small Business Innovation Assistance...................................................................................................... 11
NSW: Establishment of Industry-Led Knowledge Hubs ....................................................................................... 11
NSW: Research Attraction and Acceleration Program ........................................................................................ 11
NSW: Wine Industry ........................................................................................................................................... 12
Australia-India Council Grants Program .............................................................................................................. 12
Malta: Launch of the FUSION programme .......................................................................................................... 12
US: $2m in FAST grants awarded ...................................................................................................................... 13
Assessment of innovation performance ............................................................................. 14
Australian Government: National Survey of Research Commercialisation .......................................................... 14
Showcasing innovation in the NSW manufacturing sector .................................................................................. 14
OECD: Industry and Technology Policies in Korea ............................................................................................. 14
OECD: Smarter research spending would boost French innovation .................................................................... 14
Events & conferences ........................................................................................................... 16
Australian Technologies Competition 2014 ......................................................................................................... 16
National Resource Sciences Precinct launches in Perth ..................................................................................... 16
Biosecurity Futures Workshop ............................................................................................................................ 17
NSW Creative Achievement Awards ................................................................................................................... 17
NSW: Powerhouse Museum Exhibition............................................................................................................... 18
Innovation Prize for Africa Winners Announced .................................................................................................. 18
EcoProcura 2014 ................................................................................................................................................ 18
Publications ........................................................................................................................... 19
Growing Opportunities: South Australian and Victorian Comparative Advantages .............................................. 19
Design for future manufacturing competitiveness................................................................................................ 19
The role of science, research and technology in lifting Australian productivity..................................................... 19
ABS Summary of IT Use and Innovation in Australian Business, 2012-13 .......................................................... 20
NSW: Terms of Reference for the Minerals Industry Task Force......................................................................... 20
The Global Entrepreneur and Development Institute releases the latest Gender Index ....................................... 21
Enterprise Europe Network ................................................................................................................................. 21
The silver lining: cloud computing and small and medium enterprises ................................................................ 21
Making in America: US Manufacturing Entrepreneurship and Innovation ............................................................ 22
NESTA: Lessons from highly innovative smaller countries .................................................................................. 22
Department of Industry
Page 1
<Innovation Policy Report – August 2014>
Developments in strategy and policy
Australian Government: Entrepreneurs’ Infrastructure
Programme
The new Entrepreneurs’ Infrastructure Programme was announced in the
2014-15 Budget, as part of the Government’s $1.4 billion package (over four
years) to facilitate business competitiveness. The Programme started on
1 July 2014.
About the Entrepreneurs’ Infrastructure Programme
The $484.2 million Entrepreneurs’ Infrastructure Programme aims is to
improve the capabilities of small to medium enterprises to become more
self-reliant, competitive and grow. The Entrepreneurs’ Infrastructure
Programme offers three broad streams:
•
Business Management;
•
Research Connections; and
•
Commercialising Ideas.
Support will be provided in a range of forms, such as:
•
One-on-one advice from people with relevant private sector
experience;
•
Small co-contributions for re-engineering or growth opportunities for
business; and
•
Connection and collaboration opportunities.
The Programme is being delivered through the new Single Business Service
initiative. Single Business Service streamlines the way businesses access
industry information and services by putting their needs first - reducing red
tape and providing quality, consistent services at the lowest possible cost.
Consultation with stakeholders including peak industry bodies, businesses,
governments, and the research sector on the Programme occurred in June.
Services currently available under the Programme
The Business Evaluation and Business Growth Grant elements of the
Programme were launched on 1 July 2014. Eligible businesses can now
request a business evaluation to improve business performance, and
business growth grants to implement key recommendations.
Next steps
Services under the Research Connections stream will be available from
Department of Industry
Page 2
<Innovation Policy Report – August 2014>
1 September 2014, and the Commercialising Ideas stream will be available
from 1 November 2014. This phased approach balances the need for
continuity of services while allowing further time for programme design and
input from consultation.
The Department is currently analysing submissions as well as issues raised at
the various roadshows used to inform stakeholders about the Programme.
This analysis will inform design of the future elements of the Programme.
For further information about the Programme visit: www.business.gov.au
Crowd Sourced Equity Funding
The Corporations and Markets Advisory Committee (CAMAC) published its
report on the regulation of crowd sourced equity funding in June 2014.
CAMAC supports the facilitation of crowd sourced equity funding in Australia
and recognises its potential ‘to encourage the Australian start-up
entrepreneurial sector, especially in the crucial early stages of project and
product development.’
CAMAC recommends the introduction of a regulatory regime specifically
designed for crowd sourced equity funding and the report sets out a detailed
framework for internet-based funding.
Some of the key features proposed by CAMAC are:
•
to use crowd sourced equity funding a company will have to be either
an “exempt public company” or a public (but not listed) company;
•
an exempt public company will be a new classification of company
which will be exempt from various compliance requirements applicable
to public companies. An existing propriety or public company will be
able to convert to an exempt public company in some circumstances.
Exempt status will cease upon certain events which include on the
company reaching, CAMAC suggests, $5 million capital or $5 million
annual turnover;
•
a company will only be able to raise $2 million per annum through
crowd equity funding;
•
an investor will be limited to a $2 500 investment per annum in any one
company and an annual limit of $10 000 for all investments;
•
a standard disclosure template to provide guidance to companies
raising funds and facilitate comparison with other share offers;
•
offers can only be made through online intermediaries licensed by
ASIC. Among other obligations, intermediaries will have to provide a
generic risk disclosure statement to investors;
Department of Industry
Page 3
<Innovation Policy Report – August 2014>
•
intermediaries will also be required to enable crowd investors to
communicate with each other and with the issuer during such time as
the issuer is utilising its website; and
•
companies will not be limited as to the classes of shares they may
issue and the rights attaching to those shares, provided full disclosure
is made. This, for example, will enable a company to issue shares
without voting rights to crowd investors, should it so desire.
The Government will consider the proposals put forward in CAMAC’s report.
Australian Government: Changes to the R&D Tax Incentive
The R&D Tax Incentive better targeting measure was announced by the
previous government on 17 February 2013 as part of its Industry and
Innovation Policy Statement, A Plan for Australian Jobs. The Government
confirmed it would proceed with the measure on 6 November 2013. The better
targeting measure limits access to the R&D Tax Incentive to companies with
aggregated assessable income under $20 billion. Companies affected will be
entitled to claim R&D expenditure under the normal provisions in general tax
law, for example, a deduction for business expenditure.
The Tax Laws Amendment (Research and Development) Bill 2013, which will
give effect to the R&D Tax Incentive better targeting measure, is currently
before the Senate.
As part of the 2014/15 Federal Budget, the Government announced a
reduction in the rates of tax offsets available to companies under the R&D Tax
Incentive by 1.5 percentage points. The rates of the refundable and
non-refundable tax offsets will be reduced to 43.5 per cent and 38.5 per cent
respectively, from 1 July 2014. Legislation to give effect to the announced
reduction in rates of benefit is currently being drafted.
The R&D Tax Incentive programme will continue to provide generous,
easy-to-access support for eligible companies in all sectors of the Australian
economy - helping thousands of Australian companies each year to invest in
R&D to develop new products, processes and services to take to market here
and overseas.
New CSIRO operating arrangements
CSIRO is implementing new operating arrangements. These changes are
aimed at making it easier to do business with CSIRO and easier for staff to
deliver science that makes a difference to people, industry and the planet.
From July 2014, CSIRO will have three lines of business:
1. National facilities and collections;
Department of Industry
Page 4
<Innovation Policy Report – August 2014>
2. Impact science - including the following nine Flagships: Agriculture;
Biosecurity; Food and Nutrition; Digital Productivity and Services;
Energy, Manufacturing; Land and Water; Mineral Resources; and,
Oceans and Atmosphere; and
3. Services - including education, publishing, infrastructure technologies,
SME engagement and CSIRO Futures.
BlueScope develop new integrated solar roofing system.
BlueScope Steel has developed a building integrated photovoltaic thermal
(BIPVT) roofing system that is able to be applied to existing buildings or new
structures. The technology has adapted colorbond steel roofing panels to
capture solar energy as either electricity or heat. It is hoped that the integrated
system will lower the costs associated with photovoltaic energy by simplifying
the installation process.
The technology is the product of a $5 million project from BlueScope Steel,
$2.3 million of which was co-funded by the Australian Renewable Energy
Agency. The roofing system can produce the 1.4 kW of electrical output and
3-6 kW of thermal output. It is designed to provide property owners and
affordable, convenient and aesthetically pleasing photovoltaic option that can
assist to reduce burdens on the electricity grid during periods of peak
demand.
So far BlueScope’s BIPVT technology has been used to replace the roof of a
residential home in the Sydney suburb of Glebe, as well as second property in
the Illawarra region of NSW.
Although Solar Cell producer Dyesol offer a building integrated photovoltaic
(BIPV) system, BlueScope’s technology is the first integrated system available
in Australia, that also provides the option of generating thermal output. It is
hoped the extra flexibility offered by the BlueScope system will assist to
expand the Australian market for BIPV and BIPVT systems in the future.
NSW: Agriculture Industry Action Plan
Agriculture is a key component of the NSW economy. A 10-year Agriculture
Industry Action Plan (AIAP) is being developed with the aim of addressing a
mix of economic, environmental and social pressures that will face the
industry over the long term and to promote the growth of the industry.
The AIAP Taskforce has consulted widely in determining recommendations to
address key issues for the industry in areas of productivity, innovation, labour,
education, regulation and markets. The AIAP will be submitted for NSW
Government consideration in 2014.
Department of Industry
Page 5
<Innovation Policy Report – August 2014>
NSW: Minerals Industry Action Plan
The NSW minerals industry, including coal, is the source of almost a third of
NSW’s total exports (merchandise and services combined, 2012-2013). The
NSW Government has established a new industry-led taskforce to develop a
Minerals Industry Action Plan to provide recommendations on strategies to
drive growth, innovation and productivity in the sector over the next decade. A
Taskforce report is expected to be submitted to the Minister for Energy and
Resources before the end of 2014.
NSW: Easy Access Intellectual Property Update
The NSW Government is encouraging industry and universities in NSW to
collaborate to commercialise intellectual property (IP) developed by the
universities through the Easy Access IP program. Four NSW universities –
Macquarie University, University of Wollongong, University of New South
Wales (UNSW) and University of Technology Sydney – currently utilise the
Easy Access IP approach. The Easy Access IP movement originated at the
University of Glasgow and is now in use by a number of universities around
the world. UNSW is the Australasian Ambassador for Easy Access IP.
NSW: Smart Work Hubs
NSW Trade & Investment is exploring how Smart Work Hub pilot projects can
support flexible work practices and offer commuters an alternative work
location closer to home. Five pilot projects were announced in June 2014, and
will be operational by 31 December 2014 in Western Sydney and the NSW
Central Coast.
Ireland: Smart Futures programme
A new three year programme, Smart Futures, was launched in April 2014 in
Ireland to encourage more students to study Science, Technology,
Engineering and Mathematics (STEM). The programme seeks to improve the
strategic coordination and alignment of industry-outreach resources and drive
the uptake of students selecting STEM subjects at post-primary and third
level.
US: $100m for 32 Energy Frontier Research Centers
The United States Energy Secretary announced the award of US$100 million
for Energy Frontier Research Centers (EFRCs) to accelerate scientific
breakthroughs needed to build the 21st century energy economy. These
awards are the second round of funding for EFRCs and research supported
by this initiative will enable fundamental advances in energy production,
storage and use.
Department of Industry
Page 6
<Innovation Policy Report – August 2014>
US Cluster Mapping Website
The United States (US) Cluster Mapping and Registry project, a national
economic initiative at Harvard Business School’s Institute for Strategy and
Competitiveness and supported by the Economic Development Administration
was announced in June 2014. The project aims to bolster US competitiveness
by understanding the economic performance of clusters and regions across
the country. A new website offers access to open data about regional
economies and clusters, empowering regions, economic developers, and
businesses, and also integrates statistical analyses using county-level
business data.
US: Collaborate on pilot innovation corps activity
A collaboration between the United States National Science Foundation and
the National Institutes of Health (NIH) aims to offer NIH-funded researchers
training to help them evaluate their scientific discoveries for commercial
potential, with the goal of accelerating the translation of biomedical
innovations into applied health technologies.
US: Incubators for Clean Technology Ventures
Funding of US$3.2 million was announced in June to launch the National
Incubator Initiative for Clean Energy. The Incubator aims to create a national
support network to serve the clean energy small business and entrepreneur
community. The initiative will create a suite of technological and training
resources, connect critical industry and energy sector partners, enhance
incubator best practices, and boost access to information about industry
resources to move innovative clean energy technologies emerging from
universities and federal laboratories into the national and global marketplace.
Department of Industry
Page 7
<Innovation Policy Report – August 2014>
Developments in funding programmes
Australian Government: $155 million Growth Fund
On 30 April 2014 the Government announced a $155 million Growth Fund
that will help industry adjust to the wind-down of car manufacturing in
Australia.
The fund supports initiatives to transition workers to new jobs, help
businesses find new markets and invest in capital equipment, and support
regions to invest in infrastructure projects through five elements:
•
A $30 million Skills and Training Programme to help automotive
workers recognise their skills and train them for new jobs, while they
are still employed;
•
A $15 million boost to the Automotive Industry Structural Adjustment
Programme to extend the programme until 30 June 2018 and provide
employment support to help redundant automotive workers find new
jobs;
•
A $20 million Automotive Diversification Programme to help automotive
supply chain firms capable of diversifying to find new markets;
•
A $60 million Next Generation Manufacturing Investment Programme
to accelerate private sector investment in high value manufacturing
sectors in Victoria and South Australia;
•
A $30 million Regional Infrastructure Programme to support investment
in non-manufacturing opportunities in regions affected by the closure of
the car manufacturing industry.
The Australian Government contribution to the Growth Fund is $101 million.
Holden and Toyota are each contributing $15 million to the Growth Fund. The
South Australian and Victorian state governments will each contribute
$12 million.
The various elements of the fund will be phased in from July 2014.
Australian Government: Manufacturing Transition Programme
The Manufacturing Transition Programme (MTP) is a new $50 million national
grants programme which will assist firms to invest in a major change into
higher value or niche manufacturing activities by providing grants ranging
from $1 million up to $10 million. Applicants will be expected to contribute at
least three dollars for every dollar of grant funding awarded. Grants will be
awarded on a competitive merit based process.
The Australian manufacturing industry is diverse, ranging from relatively low
Department of Industry
Page 8
<Innovation Policy Report – August 2014>
value added food and beverage products to higher value, knowledge intensive
products such as medical devices, pharmaceuticals and electronics.
In order to remain competitive, Australian manufacturers must begin to move
away from traditional low-value manufacturing and into more knowledgeintensive and niche manufacturing. The Australian Government recognises
the need to adapt our manufacturing industry and is committed to
encouraging investment in strategic high-value manufacturing markets which
exploit Australia’s competitive advantages.
By supporting firms to transition their operations into higher value
manufacturing activities, the MTP aims to improve a firm’s competitiveness
and sustainability and create new business opportunities for the future.
The MTP will be open for applications later in 2014. Further information on
this initiative will become available on business.gov.au and through the hotline
on 13 28 46.
Australian Government: Trade Support Loans Programme
Trade Support Loans will encourage more people to take up a trade and
complete their qualification in areas of critical importance to the nation.
The Trade Support Loans Programme represents an investment of
$439 million (in fiscal balance terms) over the forward estimates and will
support Australian Apprentices in skill shortage areas through concessional,
income contingent Trade Support Loans of up to $20 000 per individual.
Trade Support Loans were a Government election commitment in 2013 and
are a 2014-15 Budget measure.
Trade Support Loans will be available to Australian Apprentices undertaking a
Certificate III or IV qualification that leads to an occupation listed on the
National Skills Needs List or a Certificate II, III or IV agricultural qualification;
or a Certificate II, III or IV horticulture qualification in rural or regional
Australia.
Payments will be made in monthly instalments in arrears and Australian
Apprentices apply and may then opt in every six months for a further six
instalments. Apprentices will have access to the greatest financial support in
the early years when they need it the most with access to $8 000 in their first
year, $6 000 in the second, $4 000 in the third and $2 000 in the fourth year.
As an additional incentive to complete, apprentices who successfully
complete their apprenticeship will have their Trade Support Loan amount
reduced by 20 per cent. Apprentices won’t make any repayments until they
are earning a sustainable income (over $53 345 in 2014-15).
Department of Industry
Page 9
<Innovation Policy Report – August 2014>
Australia SKA Pathfinder (ASKAP) radio telescope: First
images
ASKAP is developing and proving technologies for the international Square
Kilometre Array (SKA) telescope, which will start construction in Australia and
South Africa in 2018. In early June 2014 the first images from ASKAP were
captured. These images show that ASKAP is now working as a fully-fledged
radio telescope after just a few months of commissioning. They clearly
demonstrate the revolutionary potential of CSIRO's new phased array feed
technology.
Supercritical solar - new frontier for power generation
CSIRO has used solar energy to generate hot and pressurised ‘supercritical’
steam, at the highest temperatures ever achieved in the world outside of fossil
fuel sources.
Commercial solar thermal power plants around the world use subcritical
steam, operating at similar temperatures but at lower pressure. If these plants
were able to move to supercritical steam, it would increase the efficiency and
help to lower the cost of solar electricity.
The world record, set in May 2014, was at a pressure of 23.5 megapascals (a
measure of force per unit area), and temperatures up to 570 degrees Celsius.
It is the combination of pressure and temperature demonstrated at scale that
makes this such a breakthrough for solar power.
The $5.68 million research program is supported by the Australian Renewable
Energy Agency and is part of a broader collaboration with Abengoa Solar, the
largest supplier of solar thermal electricity in the world.
Opening of the Biosecure Immunology Laboratory
CSIRO and Deakin University officially opened the new high-tech national
research facility, located inside the Australian Animal Health Laboratory in
Geelong on 6 May 2014.
The new laboratory will provide more specialised techniques, at a cellular
level, to help pin-point the immune mechanisms employed by various animal
hosts. This new world-class facility will be critical in helping develop new,
more natural, therapeutics and boost work in preventing, detecting and
treating emerging infectious diseases.
The new laboratory is equipped with state-of-the-art equipment, thanks to a
long standing collaboration between CSIRO and Deakin University, with input
from the University of Georgia, USA. It will be made available as a national
resource with operational funding support from the National Collaborative
Research Infrastructure Strategy.
Department of Industry
Page 10
<Innovation Policy Report – August 2014>
NSW: Design-Led Innovation
NSW Trade and Investment is supporting a design-led innovation initiative to
encourage better business response to the immediate challenges of
technological change and global competition. The initiative includes a focus
on manufacturing SMEs in areas of high manufacturing concentration. The
Department is coordinating a series of workshops, in partnership with the
Commonwealth's Entrepreneur's Infrastructure Programme, which are being
held at Olympic Park in Western Sydney, Newcastle, Parramatta, Wollongong
and Sydney CBD, during 2014.
NSW: Small Business Innovation Assistance
To ensure NSW capitalises on growth of small businesses, the NSW Small
Business Commissioner’s Office has developed a range of resources under
the Small Biz Connect program to assist small businesses identify key areas
for improvement and support their commercial sustainability. These include
Design Thinking "health checks" designed to encourage design-led and
innovative solutions for small business.
The NSW Government announced in the NSW 2014-15 Budget that it will
deliver $14 million to support Small Business Commissioner’s programs
including the Small Biz Connect, and dispute resolution services. This
includes $1.1 million of new funding over four years for specialist small
business advisors with language skills to support small businesses from nonEnglish speaking backgrounds in Western Sydney.
NSW: Establishment of Industry-Led Knowledge Hubs
NSW Trade and Investment is assisting industry to establish knowledge hubs
which will provide a platform for collaboration and networks with links to
research capabilities, SMEs and start-ups. Planning and preparation work is
in process for hubs in Medical Technology; Digital Creative; Transport &
Logistics; Energy; and Financial Services industries.
A knowledge hub designation provides a mechanism to recognise existing
NSW industry strengths and focus activity to improve industry-research
interaction, innovative activity, and enhance NSW’s global competitiveness.
NSW: Research Attraction and Acceleration Program
Under this program, the NSW Government provides funding for significant
research projects being undertaken at research centres and universities in
NSW. In 2013-14, the NSW Office of Science and Research supported two
Cooperative Research Centres, two Australian Research Centres of
Excellence, as well as projects at Macquarie and Sydney Universities and the
Cancer Institute NSW.
Department of Industry
Page 11
<Innovation Policy Report – August 2014>
In 2014-15, the NSW Government is providing over $13 million for the
Research Attraction and Acceleration Program, including funding for National
ICT Australia, to drive continued investment to develop the State’s research
and development capabilities.
NSW: Wine Industry
NSW is Australia’s second largest wine producing state, accounting for 34
per cent of Australia’s wine industry and nine per cent of Australia's top
20 wine exporters.
In March 2014, the Department of Primary Industries (DPI) contracted the
Australian Wine Research Institute (AWRI) to deliver a one-year skills pilot
program (with potential to be extended to 3 years) with the aim of improving
industry productivity and profitability by addressing issues such as better
management of pests, diseases, nutrients and water.
DPI, NSW Wine Industry Association and Charles Sturt University are
conducting collaborative research at the National Wine and Grape Industry
Centre in Wagga to implement innovation in the NSW wine industry and
assist in building the capacity of industry to face significant domestic and
international competition.
Australia-India Council Grants Program
The Australia-India Council’s annual grant funding round closed on
3 August 2014.The programme welcomes funding applications from
individuals and organisations in Australia for projects which are likely to
promote long-term contact and cooperation between Australia and India. The
grants are intended to provide seed funds for innovative proposals relevant to
the mission and goals of the Council. The Council gives priority to projects in
the areas of Arts, Culture and Heritage, Education, Science, Technology and
Design, Social initiatives, Public Policy activities and Tourism.
Malta: Launch of the FUSION programme
The Malta Council for Science and Technology launched the FUSION
programme in June 2014. This funding programme aims to support research
and innovation with the ultimate goal of promoting and supporting local
research and innovation as well as providing the necessary handholding in
order to enable researchers and technologists to turn their innovative ideas
into a market ready reality. FUSION is supported through Malta Government
funds managed by the Malta Council for Science and Technology and will run
from 2014 to 2020.
Department of Industry
Page 12
<Innovation Policy Report – August 2014>
US: $2m in FAST grants awarded
US$2 million of United States Federal and State Technology (FAST)
partnership program grants have been awarded to 22 state and local
economic development agencies, business development centres, colleges
and universities. These grants will support programs for innovative,
technology-driven small businesses under the agency’s FAST partnership
program that’s designed to stimulate economic development among small,
high-tech businesses through federally-funded innovation and research and
development, such as Small Business Innovation Research and Small
Business Technology Transfer programs.
Department of Industry
Page 13
<Innovation Policy Report – August 2014>
Assessment of innovation performance
Australian Government: National Survey of Research
Commercialisation 2014 Collection
The Department conducted the National Survey of Research
Commercialisation (NSRC) over June and July with universities, medical
research institutes and publicly funded research organisations to collect
commercialisation performance information for 2012 and 2013.
Following this year’s survey, the NSRC data collection will comprise valuable
time series data spanning 2000-13. The 2012-13 survey data will be
published electronically on the Department’s website in late 2014.
Showcasing innovation in the NSW manufacturing sector
In response to recommendations detailed in the NSW Manufacturing Industry
Action Plan, NSW Trade & Investment worked with industry to select
businesses for the making of video case studies highlighting the diversity,
global reach, innovation, competitiveness and world-class quality to be found
throughout the manufacturing sector in NSW. Businesses selected for case
studies shown during National Manufacturing Week in May 2014, included:
RØDE Microphones, the Byron Group, and Croker Oars.
The competitiveness of NSW manufacturers is critical to maintain the sector’s
status as the fifth largest employer in NSW, responsible for around a third of
Australia's total manufacturing output. NSW is showing sustained signs of
growth in the export-driven market of high-skill manufacturing products and
services. To support this, the Supply Chain Accelerator pilot program provides
assistance to exporters to develop globally competitive supply chains in key
NSW industries through capacity building.
OECD: Industry and Technology Policies in Korea
A recent OECD review addresses Korea’s industry and technology policies
and institutions, and provides policy recommendations. The report identifies
reforms to reinforce the Korean innovation system, such as creating greater
incentives to commercialise publically-funded research strengthening services
sector productivity through structural reform and more fully assessing the
economic impact of public support measures.
OECD: Smarter research spending would boost French
innovation
The OECD’s Review of Innovation Policy: France suggests that making public
research institutions more accountable and channelling more funds into the
most promising R&D projects would help restore France’s former prowess in
Department of Industry
Page 14
<Innovation Policy Report – August 2014>
science and technology. The review recommends completing partly
implemented structural changes to enable more excellence-based financing,
better evaluation of public research and closer coordination between industry
and the public sector. Universities should be given a greater role alongside
the country’s powerful public research organisations.
Department of Industry
Page 15
<Innovation Policy Report – August 2014>
Events & conferences
Australian Technologies Competition 2014
The Australian Technologies Competition will award its 2014 winners at a gala
dinner event, hosted by former host of ABC’s New Inventors James O’Loghlin,
in Sydney on 16 September.
The Australian Technologies Competition builds capabilities in innovative
Australian SMEs and encourages the next wave of entrepreneurship and
investment in the industries of the future. Over a nine month period
participating firms: receive two months of mentoring and training; participate in
showcasing activities to Australian corporate customers; and have the
opportunity to participate in a trade mission to Asia, supported by the
Department and Austrade.
Since its inception, the Competition has worked with over 300 Australian
SMEs and identified over $300 million in project opportunities:
•
As part of the Prime Minister’s recent trade mission to China, finalist of
the 2013 energy award, RayGen Resources, signed a $60 million
export deal and has directly accredited their participation in the
Competition with this outcome;
•
Winner of the 2013 mining award, Queensland based Global Future
Solutions, manufacturers of non-toxic fracking fluids, directly accredits
the profile they gained from the Competition with growing their sales
tenfold, and has enabled them to generate investment funding to
support the establishment of domestic production facilities in
Queensland;
•
The 2012 winner, enLighten Australia, manufacturers of LED lighting
equipment, have experienced growth in revenue of over 250 per cent
since their win;
•
The 2011 winner, SMAC Technologies has secured over 90 new
contracts across Asia, the United States and Australia, attributing much
of their success to the business fundamentals and profile gained
through the Competition.
National Resource Sciences Precinct launches in Perth
On Tuesday 8 April, the Hon Ian Macfarlane MP, Minister for Industry,
launched the National Resource Sciences Precinct (NRSP) in Perth, Western
Australia.
The NRSP is a CSIRO, Curtin University and The University of Western
Australia collaboration connecting the world’s best researchers with industry
and government to tackle some of the most complex challenges facing the
Department of Industry
Page 16
<Innovation Policy Report – August 2014>
resources sector. The NRSP is one of the five global research precincts
outlined in CSIRO’s 2011-15 Strategy.
During the launch, the appointment of an independent chair for the NRSP was
announced. Managing Director and Chief Executive of Transfield Services,
Graeme Hunt, has taken up the inaugural position bringing almost 40 years of
industry experience to the table.
Biosecurity Futures Workshop
The CSIRO Biosecurity Flagship and CSIRO Futures, in partnership with
Animal Health Australia, the Plant Biosecurity Cooperative Research Centre
(CRC), and the Invasive Animals CRC, are developing a report on Biosecurity
Futures.
The Biosecurity Futures report will use strategic foresight to identify the major
biosecurity trends and risks that Australia may need to respond to over the
next 20-30 years, within a global context.
The report will provide a clear, consistent position that stimulates thinking and
discussion around Australia’s biosecurity future amongst senior leadership in
government, industry and research organisations.
In support of the development of the report, more than 50 leading scientists,
policy makers, industry representatives and economists attended workshops
in Canberra in May to discuss the future trajectory and challenges for
biosecurity in Australia.
NSW Creative Achievement Awards
In response to a recommendation within the NSW Creative Industries Action
Plan, the NSW Government launched the NSW Creative Laureate and NSW
Emerging Creative Talent Awards to celebrate and reward outstanding
achievements that help raise the global profile of NSW Creative Industries.
The winners were announced by the Deputy Premier at the inaugural event
on 28 May during Vivid Sydney 2014.
The independent Judging Panel determined that Animal Logic won the NSW
Creative Laureate. This is a multi-award winning company that provides digital
animation and visual effects (VFX) for the feature film and television
industries. Animal Logic's work includes: The Lego Movie, The Great Gatsby,
Legends of the Guardians: The Owls of Ga'Hoole, Walking with Dinosaurs:
The Movie, The Matrix, and Academy award winning Happy Feet.
Animal Logic Co-Founder and CEO Mr Zareh Nalbandian, has been assigned
the title of 2014 Ambassador for NSW Creative Industries to help promote
NSW as a global creative centre.
The NSW Emerging Creative Talent Award was awarded to Jason van
Department of Industry
Page 17
<Innovation Policy Report – August 2014>
Genderen for his internationally acclaimed short "pocket films", filmed with a
mobile phone camera, which demonstrate leadership in originality and
innovation, including through his creative application of technology.
NSW: Powerhouse Museum Exhibition
The annual Engineering Excellence Awards exhibition is a collaboration
between the Powerhouse Museum and the Sydney Division of Engineers
Australia. The exhibition showcases innovative Australian Engineering
projects that have been developed for both local and global markets and this
year runs from 6 February 2014 to 11 January 2015.
The judging panel comprises practitioners and academics from the
engineering community.
Innovation Prize for Africa Winners Announced
AgriProtein are recent winners of the Innovation Prize for Africa, an initiative
of the African Innovation Foundation which rewards African innovators in
various sectors for creating solutions to Africa’s biggest challenges.
AgriProtein uses flies reared on a very large scale to lay eggs that are
hatched into larvae on organic waste material; the larvae are then harvested
and dried into a natural and sustainable feed for chicken and fish.
EcoProcura 2014
The EcoProcura 2014 conference will be held in Ghent, Belgium on
24 - 26 September 2014. EcoProcura 2014 has the theme of examining
sustainable public procurement from the perspective of cost-efficiency; and is
targeted to procurers from all levels of government, policy-makers, business,
suppliers, manufacturers, multipliers and representatives from the European
Commission and European Parliament.
EcoProcura 2014 will examine the cost-efficient use of public money through
procurement; development of integrated sustainable public procurement
strategies; implementation of the new European Public Procurement
Directives; and how public procurement can stimulate innovation.
Department of Industry
Page 18
<Innovation Policy Report – August 2014>
Publications
Growing Opportunities: South Australian and Victorian
Comparative Advantages
Reviews of the South Australian and Victorian economies were announced by
the Prime Minister and the Minister for Industry on 18 December 2013 in
response to Holden’s decision to close its manufacturing operations by 2017.
The scope of the reviews was broadened as a result of Toyota’s
announcement that it would cease manufacturing by 2017.
The panels’ report, Growing Opportunities: South Australian and Victorian
Comparative Advantages, found that the South Australian and Victorian
economies remain strong and are in a good position to weather the closure of
car making in Australia over the next three years. Key growth sectors for the
future were identified, such as: advanced manufacturing; food and agriculture;
health and biomedical; oil and gas; and mining equipment technology and
services. The report noted that refocussing publicly-funded research to better
meet business driven needs will help capture opportunities in these growth
sectors.
Design for future manufacturing competitiveness
A new report recently launched by Minister Macfarlane contains practical
advice to help manufacturing firms remain competitive by transitioning to high
value-added products. The report, Design for future manufacturing
competitiveness, discusses how companies can apply design principles to all
aspects of their work to turn their ideas into products and services their
customers want.
The advice presented in the report is based on a series of workshops and
surveys with more than 300 participants from the manufacturing industry; and
in-depth case studies with high performing Australian manufacturing firms
who have found success in lifting their competitiveness through the adoption
of new processes.
The Department commissioned the University of Technology Sydney, in
collaboration with CSIRO, to develop the report, which was released on
10 June 2014.
The role of science, research and technology in lifting
Australian productivity
The Australian Council of Learned Academies has published its report, The
role of science, research and technology in lifting Australian productivity which
examines the role of science, research and technology in lifting Australian
productivity. The report lists 25 key findings about Australia’s current
Department of Industry
Page 19
<Innovation Policy Report – August 2014>
performance and outlines opportunities to boost innovation driven productivity.
This report has three major conclusions:
•
building Australia’s future industries will depend on adopting
technological innovation to develop high-value products and services
for a global market;
•
improving collaboration in Australia, between businesses and between
business and publicly funded research, will significantly enhance
innovation. International collaboration is also critically important. Both
domestic and international collaboration improves the productivity and
competitiveness of Australian technology-based firms; and
•
an innovative workforce that combines technical and non-technical
disciplines, and enables good business management, is essential to
underpin the competitive advantage of Australian industries and realise
opportunities to lift productivity.
ABS Summary of IT Use and Innovation in Australian
Business, 2012-13
The latest ABS Summary of IT Use and Innovation in Australian Business
publication presents information from the 2012-13 Business Characteristics
Survey. The publication finds that as at 30 June 2013, almost one in four
businesses (23 per cent) had some form of innovative activity that was still in
development and that almost two in five businesses (37 per cent) had
introduced at least one type of innovation during the 2012-13 reference
period. It is also noted that the proportion of businesses that reported
abandoning at least one type of innovative activity during the year ended
30 June 2013 was 6 per cent - this rate has been consistent at between
6 per cent and 7 per cent for the past three years.
NSW: Terms of Reference for the Minerals Industry Task
Force
The NSW Government has established a new industry-led taskforce to
develop a Minerals Industry Action Plan to provide recommendations on
strategies to drive growth, innovation and productivity in the sector over the
next decade. The Terms of Reference for the Taskforce have been published.
The Taskforce will be seeking feedback on its draft Industry Action Plan when
it is released.
The Minerals Plan will be one of eight Industry Action Plans commissioned by
the Government.
Department of Industry
Page 20
<Innovation Policy Report – August 2014>
The Global Entrepreneur and Development Institute releases
the latest Gender Index
The latest Gender-Global Entrepreneur and Development Index, released on
2 June 2014 at the Dell’s Women’s Entrepreneurs Network in Austin, Texas,
ranks Australia second after the United States as one of the best places in the
world for female entrepreneurship. This 17-country pilot analysis aimed to
identify the entrepreneurial “North Star”, the destination on the economic
growth horizon fostering high potential female entrepreneurship. However, the
report notes that the “tall poppy syndrome” often meant that while there was a
good environment for starting new businesses in Australia, not enough
women were grasping the opportunity.
Enterprise Europe Network
Steered by the European Commission, the Enterprise Europe Network is
helping SMEs realise innovations, create new business partnerships and
access finance. With a network of more than 600 partners active across
54 countries, Europe’s SMEs can explore their global potential without leaving
home.
The silver lining: cloud computing and small and medium
enterprises
A paper released by the Grattan Institute explores issues raised at a
workshop run by the Institute and Google on how policymakers and business
can accelerate the spread of cloud computing among SMEs. It uses cloud
computing – the delivery of on-demand information technology services over
the Internet – as a case study for how online technologies can benefit smaller
firms. Workshop participants agreed that government and industry can
remove obstacles to the use of cloud computing and help SMEs capture its
benefits. The industry itself should lead the education of SMEs on the case for
cloud computing. Yet government can:
•
choose policy settings that promote broader productivity growth and
innovation;
•
ensure interaction with government over the internet is the default for
all businesses;
•
provide an appropriate policy environment for investment in broadband
networks that meet the needs of small business.
Department of Industry
Page 21
<Innovation Policy Report – August 2014>
Making in America: US Manufacturing Entrepreneurship and
Innovation
The report Making in America: US Manufacturing Entrepreneurship and
Innovation, has been released by the Executive Office of the President of the
United States of America, which describes how new technologies are
reducing the cost, increasing the speed, and making it easier for
entrepreneurs and manufacturers to translate their ideas into products made
in America.
NESTA: Lessons from highly innovative smaller countries
The paper When Small is Beautiful: Lessons from highly innovative smaller
countries released in June 2014, analyses the world’s most innovative
countries with populations of less than ten million. It focuses on Finland,
Estonia, Israel, Singapore and the Basque Country. It finds that crucially these
smaller countries have generally not copied the strategies of their larger
counterparts (the US, Germany, Japan and South Korea). Lacking large
domestic markets, or the scale to be at the leading edge of research in every
field, they have made the most of their existing advantages, and developed
others. The five themes that emerge from these case studies are:
•
the importance of downstream innovation, not just basic research – the
first notable feature of these innovative small countries is how good
they are at turning good ideas and early-stage innovation into
commercial successes;
•
openness to the world, its ideas and opportunities – no country has a
monopoly on good ideas or on innovations, and it seems that small
countries that do best at innovation are also good at adopting the good
ideas of others;
•
a government whose wider policies support innovation and technology
– all the governments of these small innovative nations do not just
support innovation directly with research funding and favourable tax
regimes. They also promote it through their wider activities;
•
strong but flexible institutions – small innovative countries tend to
possess well regarded innovation institutions which tend to be part of
or related to the state but somewhat removed from central political
control; and
•
a sense of national mission – the final characteristic is perhaps the
hardest to evidence but one that is widely attested by people in these
countries themselves.
Department of Industry
Page 22
<Innovation Policy Report – August 2014>

Documentos relacionados