Label Feeder - pb tec solutions
Transcrição
Label Feeder - pb tec solutions
Label Feeder (en) The new Fuji NXT Label Feeder Label Feeder LP Series Advantages • • • • • • • • • • Simple to use Automatically places labels using existing pick-and-place equipment Fits on to the placement machine like any other feeder The most flexible solution for board labeling Faster and more accurate than hand placement Reliable, electronic operation Requires no additional floor space Low maintenance costs Saves time and money a unique approach Identification Requirements A Flexible Alternative PCBs need to be marked for a number of reasons –product identification, traceability and process flow control are just a few. By far the most common method used is the application of labels, usually by hand. This can add significantly to labor costs and placement accuracy can be questionable, especially if the label data is to be read automatically downstream, for instance in an AOI system. If a pleasing cosmetic result is required, hand placement should not be the method of choice. Other identification methods are available: in-line label applicators being the favorite. These can however be expensive both to buy and to own. A high initial purchase cost can be difficult to justify, ongoing maintenance also needs to be considered, as does the additional factory floor space they consume. Laser marking is another option and while this does facilitate realtime data marking it comes with compounded cost penalties and is not suitable for all applications. Why not use your existing placement equipment to place labels? A Hover-Davis LP series label feeder fits easily onto existing placement machines and presents the labels to the pick-and-place machine as if they were just another component. Add a vision file for the label as a leadless chip component and your work is done! No special programming or training required. Cost Effective The LP approach is faster and more accurate than hand placement: Labels are placed at the normal machine rate and as accurately as normal components. The result is a far more cost effective solution to board marking Modular and flexible Modular construction Label Modules A simple, modular approach to feeder design adds to the overall flexibility of the LP series – the concept involves two basic components. First: the machine specific feeder element (LP) which provides the mechanical and electrical interface to the host machine (see LP Series compatibility matrix). Second: the label specific module (LMG) that is designed specifically to peel and present the label stock (see applicable label dimensions). Label modules are interchangeable: This allows the user to quickly and efficiently change label sizes without the need for tools. Simply use the release lever on the base feeder, lift the module off and replace it with a new module. The one-piece design has all the size-specific parts that are required for the new label. label module, interchangeable New for Label Feeder Siplace (LPS): Take-up wheel for the used liner material of the labels. The empty material can be taken out of the feeder without stopping the machine. labels and more Cost effective Versatile The LP Series is extremely versatile. The flexibility of the label module means it can also be adapted to present a wide assortment of adhesive backed products just a few of which are illustrated below. Humidity or pressure sensors, distance pads, shields, thermal conduction pads, Kapton dots, special masks or similar special parts. In one row applied onto a liner it is possible to feed these parts automatically in the pick and place system with a label feeder. Change your special applications with the label feeder to standard applications. Highest Flexibility Compatible with many pick & place systems Parameter Standard models Feeder width 61.7 mm ^ 56er Feeder Feed Rate 53 mm/s Pick Point Repeatability ± 0,25 mm Parameter Wide models Feeder width 81.9 mm ^ 88er Feeder Feed Rate 53 mm/s Pick Point Repeatability ± 0,25 mm Applicable label dimensions standard feeder Typ Hersteller LPA Assembleon LPG Assembleon- LPE * Essemtec LPF Fuji LPFN Fuji LPJ Juki * Mydata LPP Panasonic * Panasonic Europlacer LPSG Samsung X Y L T Min. Max 4 mm 42 mm 4 mm 50 mm 6 mm 42 mm 0.5 mm application dependant LPS Siemens LPU Universal LPY Yamaha Maschinenmodell ACM, FCM-II, GEM-Xi, GEM-Xi, AX Serie, MG-1 & MG-8 mit ITF Interface. GEM, GEM-X, GEM-X-II, MG-1 und MG-8 mit CL oder Cli Interface FLX und Paraquda Xpress, Flexys10, Finesse*, Vitesse* IP Serie, QP232, QP341, XP242 NXT, XFP, AIM 700 Serie, 2000 Serie, FX, CX MY and TP Serie MPAV2, MPAG3, MSF, MCF, BM221, BM231, IPAC CM212, CM402, CM602 CP20, CP40, CP45, NEO CP 50 SIPLACE® S, F, C, HF, HS, D-Serie, X-Serie mit Schultz Interface GSM Serie, Genesis, Advantis ® YG Serie * Sprechen Sie uns bezüglich anderer Applikationen gerne an Applicable label dimensions Wide models X Y L T Min. Max 4 mm 58 mm 4 mm 50 mm 6 mm 58 mm 0.5 mm application dependant The perfect solution from pb tec for automatic labeling Our Label Feeder combined with the Kapton material TT403FL, which is temperature resistant up to 450° C. The labels are available in white and green, matt or glossy. They can be printed in several different colours. The transparent liner ist specially designed for auto-apply applications, for example with label presenters from Hover-Davis. TT403 is UL and CSA certified and also RoHS compliant. To eliminate damaging static buildup in the production area, our auto-apply labels are delivered on an anti-static plastic reel. These reels are recyclable and 100% RoHS compliant. Standard label sizes available ex works or on short call – pre-printed or blank, for example: 4 x 4 mm 5 x 5 mm 6.35 x 6.35 mm 7 x 7 mm 9x9m Do you already know our further products? Amongst others: AOI and SPI systems from Mirtec Diverse feeding solutions like tube feeder, JEDEC tray feeder and Tape feeder for special machines Taping machines, systems for separation and application of components and special parts Dispenser, Die Attach Systems, systems for Heat Bonding and LCD Module Equipment Solutions for Identification like labels and label printers, Label feeders, also with integrated printer (POD) We are looking forward to your challenge! pb tec solutions GmbH Max-Planck-Straße 11 63755 Alzenau (Germany) T.: +49 6023-94771-0 F.: +49 6023-94771-29 [email protected] - www.pbtecsolutions.de