8186D55(XM-2DTSB6219BT) UI-87A RDS+前BT+刹车+前后USB+

XM-2DTSB6219BT
4X 25W
CONTENTS
Panel Introduction
02
Remote control function
04
Turn on/off Host
06
Entering the main interface
06
Disc Function Operation
06
Radio Function Operation
07
Multimedia function
08
BT Function Operation
09
External input operation
10
Steering wheel setting(Optional)
10
Calendar setting
11
Setup
11
General setting
11
Language setting
11
Audio setting
12
Video setting
12
Touch calibration
12
Volume setting
12
Other Functions
13
Wiring Diagram
14
Trouble shooting
14
Wiring Diagram
This player is equipped with ISO standard connector, Please follow below instruction:
White/White black - Left front speaker (+/-)
Yellow - 12V Constant
Purple/Purple black - Right rear speaker (+/-)
Black - Ground wire
Green/Green black - Left rear speaker (+/-)
Blue - Power Antenna / Remote Amp Tum On
Pink - Parking Brake (-)
Orange - Back-Up Camera Trigger (+)
Trouble Shooting
PROBLEM
Cannot power on
CAUSE
SOLUTION
Check whether power fuse
melt or not
Change fuse same as the old one
Some factors cause MPU
wrong operation
Press [RES] button on the panel by
penpoint, then, power on
After ignition switch
off, setting information Change battery or fuse
all lose
Reset information and save
Poor performance of
radio station
Move the car to another place,then
research
Weak signal
There is a disc inside.
Disc is scratched
Put wrong side of disc into the
unit
Eject disc,then,slot in new disc
Change new disc
Lens has dirty
Clean lens by lens clean disc
Cannot switch
language/subtitle
There is only one language/
subtitle in disc
If disc is not with multi-language/
subtitle, it cannot switch language/
subtitle
No image
Other factors cause MPU
wrong operation
Press [RES] button on the panel by
penpoint, then ,power on
Cannot watch image
during driving
It's not allowed to watch
image during driving
Park the car in a safe place, Put
the car stall in “P” position, pull
up the hand brake
Cannot load disc
Cannot play disc
01
Grey/Grey black - Right front speaker (+/-)
Red - ACC ON (+12V)
14
Slot in the disk with sign side up
Other Functions
Rearview function
Panel Introduction
8
9
In any running state, the video signal can switch to reverse video state when reversing the car, and
the system shall return to its initial running state after reversing the car.
Warn:
Do not rely on CCD system completely, please make sure your car is safe by your eyes during driving.
Back rearview system only assists in driving. As the distance range of rearview system is limited,
completely relying on the rearview system during driving may cause accidents.
MIC
RST
7
10
11
FM/AM
1
2
AMS
3
MUTE
4
SD
5
USB
6
Analog on-site backup
Cannot power on
XM-2DTSB6219BT
1. button
Press this button will turn on power, during working longer press this button will turn offpower,
on any mode, shortly press will return main menu.
Trouble Shooting
PROBLEM
AUX
Backup rearview
CAUSE
SOLUTION
Check whether power fuse
melt or not
Change fuse same as the old one
Some factors cause MPU
wrong operation
Press [RES] button on the panel by
penpoint, then, power on
After ignition switch
off, setting information Change battery or fuse
all lose
Reset information and save
Poor performance of
radio station
Move the car to another place,then
research
Weak signal
2.AMS
Under radio mode, short press this button so as to browse the memorized radio stations, and long
press it to automatically search and save radio stations.
3.MUTE
Press this button to turn off volume output, press it again to restore the previous volume level.
Long press MUTE button to turn off TFT screen, and short press it so that TFT screen shall be re-lit.
4.SD
Insert SD card so as to read audio/video files.
There is a disc inside.
Disc is scratched
Put wrong side of disc into the
unit
Eject disc,then,slot in new disc
Change new disc
Lens has dirty
Clean lens by lens clean disc
Cannot switch
language/subtitle
There is only one language/
subtitle in disc
If disc is not with multi-language/
subtitle, it cannot switch language/
subtitle
No image
Other factors cause MPU
wrong operation
Press [RES] button on the panel by
penpoint, then ,power on
6.AUX
To input external audio.
Warning: You can only use either front or rear AUX at a time. Never connect both front and rear
AUX at the same time.
Cannot watch image
during driving
It's not allowed to watch
image during driving
Park the car in a safe place, Put
the car stall in “P” position, pull
up the hand brake
7.RST
Press this hole with a pointed tool, and the device shall restore to default settings after restarting.
Cannot load disc
Cannot play disc
13
Slot in the disk with sign side up
5.USB
Insert USB removable device so as to read audio/video files. Warning :You can only use either
front or rear USB at a time. Never connect both front and rear USB at the same time! This could
cause malfunctions.
02
8.IR
To receive infrared signal from the remote control.
9.MIC
BT microphone input port.
Audio setting
Click the icon [ ] in setting interface to enter audio setting interface, click the icon [
equalizer setting interface.
Drag the icon [ ] to implement relevant settings.
] to enter
10. MAP slot
Insert map card to read navigation map data.
11.
(Eject disc)
When there is a disc inside the unit, press the button can eject the disc.
Touch the icon [
] to enter sound effect relevant setting interface.
Touch the icon [
] to return to the initial setting.
12. FM/AM (radio button /band switch)
Press the button to switch to the radio mode. In radio mode, band is switched when the button is
pressed.
Video setting
Click icon on setup interface to access video setting interface, as shown in below:
In video setting interface, you may set the ASPECT RATIO, BRIGHTNESS, CONTRAST,
SATURATION, HUE for the video.
Touch calibration
If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”.
Click the icon [
] in setting interface to enter “Calibrate” interface.
Touching methods
Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as to calibrate
the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected.
Volume setting
The user may adjust the volume size through volume setting.
The user also may rotate the knob【VOL】on panel to adjust the volume.
03
12
Remote control function
Calendar setting
Touch the icon【
6. SEEK+ (
)/ SEEK- (
)button
In normal playing of MP3/USB/SD/DVD songs,
press this button to play previous song or next
song.
】in main interface to enter calendar setting interface.
7. VOL+ / VOLPress this button to increase or decrease volume
level.
Calendar setting method
8. SEL button
Press this button to choose sound feature.
Touch the icon[
]in calendar interface to set Year, Month, Date.
Touch the numbers on calendar interface to set the date or week information.
FB
FF
9. LOUD button
Press this button to startup LOUD function.
Setup
Touch the icon【 】in main interface to enter setting interface.
Touch the icon
under any mode to switch to setting interface.
Touch the icon
Touch the icon
Touch the icon
to enter general setting interface
to enter radio setting interface
to enter language setting interface
Touch the icon
Touch the icon
Touch the icon
to set play mode switch
to enter video setting interface
to set screen calibration function
10. BAND - P/N button
In radio mode, press this button to choose band.
In VCD, DVD mode, press this button to choose
AUTO, PAL or NTSC system.
RPT
11. LOC/RDM button
In radio mode, press this button to switch between
local and direction.
In USB/SD mode, press this key to randomly play.
General setting
Click
icon on setup interface to access general setting interface, as shown in below :
1. POWER button
Press once to switch on, press again to switch off.
In “General setting” interface, you are able to set your favorable wallpaper and check DVD/MCU
version No.; Click the icon[
] to preview upwards and downwards.
Language setting
During use, you can select your familiar language to display menu by language setup. Click
on setup interface to access language setting interface, as shown in below:
icon
13. PLAY/PAUSE button
Press this button to switch between play and
pause.In stop mode,press this button to play.
2. MUTE button
Press once to turn off audio output, press again
to resume volume level.
14. FF/FB Button
Press this button to fast forward/fast backward.
3. NAVI button
Press this button to achieve navigation.
Note: no navigation press this button does not
work.
15. 0-9+ Button
In Audio/Radio mode, press number button +
enter button to choose desired song section/
preset stations.
In Video mode, press GOTO button+ number
button + enter button to choose desired song
section/preset stations.
4. SOURCE button
Press this button change mode.
In the languagebar [
correspondingicon[
] you need to set, touch the
]to select your familiar language.
11
12. STOP button
Press this button to stop playing, press again to
continue playing.
5. EQ button
Press this button at the can switch between
different modes.
04
16. AMS Button
In radio mode, press this button to browse stored
stations.
26. OSD Button
Press this button to show screen display, like
playing time, title, etc.
17. TITLE Button
In DVD mode, press this button to play back to
the top menu of disc. (Versatile disc support this
function) .
27. ZOOM button
In DVD/VCD mode, press this button to ZOOM
in/out.
In BT phone book, touch the icon [
][
] to find a phone number upwards or downwards. Tap the
first letter of a name via the keypadto search a phone number in your phone book quickly.
Touch the icon [
] to delete all phone numbers downloaded in your phone book.
7.Pairing records
Touch the icon [ ] in BT interface to enter BT pairing interface and check all pairing records.
Touch the button to check the pairing records upwards.
Touch the button to check the pairing records downwards.
28. MENU button
Press button to back to the main menu.
18. AUDIO button
In DVD mode, press this button to switch
language of dialogue.
In VCD mode, press this button to choose left
track, right track,and stereo.
BATTERY CHANGE
When control distance of remote control becomes
shorter or no function, please change battery,
please confirm polarity before change.
One hand press stopper, then pull out battery.
19. GO TO Button
In playing mode, press this button with number
button + enter button, you can choose songs/
videos to play.
Touch the icon to search a mobile BT device.
8.Incoming call displaying
Under any mode, the system will switch to BT hands-free interface automatically when there is an
incoming call, together with incoming-call music and incoming-call displaying to remind you to
answer the call.
External input operation
Respectively put video/audio input plugs of the unit into video/audio input jacks of external device,
and then touch the icon [
] in main interface to enter AUX input interface.
20. SUB-T button
In DVD mode, press this button to switch
language of subtitle.
Put battery into controller.
21. PBC Button
In VCD/DVD mode, press this button to go back
to root menu of disc.
Insert battery holder into controller.
22. UP, DOWN, LEFT, RIGHT, ENTER button
When playing MP3/USB/SD, press these buttons
to choose playing menu.
When playing VCD/DVD, press these buttons to
work with ZOOM to move.
Click the icon [
] to enter EQ setting interface. For detail function instruction, please refer the
section “Audio setting”.
Steering wheel setting(Optional)
Touch the icon【 】in main interface to enter learning steering wheel setting interface.
Touch the icon
to resume the initial setting.
After setting, touch the icon
to finish the setting.
23. RPT Button
In Audio mode, press this button to play
repeatedly.
24. ANGLE Button
In DVD mode, press this button to change play
angle. (Versatile disc support this function)
Custom setting
25. ST Button
In radio mode, press this button to choose stereo
or mono station.
Via “Custom setting”, you may manually set the buttons function on steering wheel.
05
10
Turn on/off Host
BT Function Operation
When the ignition switch is put in ACC or ON position, Press open key on the front panel to turn on
the unit. After the host starts, hold open key for 3 seconds , the host will turn off.
1. Enter/exit
Touch [
] icon in the main interface to enter the BT interface
Touch
icon to exit BT interface.
Touch
icon to exit BT interface and enter the main interface.
Touch
icon to exit BT interface and enter setting interface
2. Pair/link
To use BT hand-free function, make connection first, i.e. match thehost with the BT mobile phone.
Operation methods:
Set the host to be matching state, and open the BT of your mobile phone and use the mobile phone to
search device, the mobile phone shall prompt to match password with the BT when it has searched
the BT device.Input BT password (0000) to the mobile phone and confirm. The mobile phone shall
prompt whether authorize to this device, please select [Yes].
NOTE:Phone and BT shall automatically connect within 20 seconds. Under any working mode, the
host shall convert to BT state if there is an incoming call. And the host shall restore to current mode
after hanging up.
When the BT device matches with this device, the connection status shall display “LINK ok”,
otherwise, it shall display “NO LINK”.
3. Dialing
You can dial on mobile phone directly or input phone number through the number buttons on the
screen, click
to delete if there is input error.
After input the phone number, click
to make a call, and click
to hang up the phone.During
talking, click the icon [ ] to switch voice output between car
speaker and mobile.
4. Call records
Touch the icon [
] in BT interface to enter calling records interface
Touch the icon to check the received phone numbers.
Touch the icon to check the dialed phone numbers.
Touch the icon to check the calling records
upwards.
.
Touch the icon to check the calling records downwards.
Touch the icon to check the missed phone numbers.
Entering the main interface
Under power-on status, press the button [POWER] on the panel to switch to the main interface.
Touch the [
] icon or use the touch pen/finger gently sliding around the screen to switch to the
main menu page.
Touch the function icons so as to access the corresponding function operations.
Disc Function Operation
1. Play/eject disc
Play disc
Insert the disc into the disc slot with the printing surface up, system will detect the disc and
automatically take it in to read and play.
Eject disc
(1) Click [ ]button on the panel to eject the disc.
(2) If a disc has not been took away 15 seconds after it is ejected, system will
automatically take in the disc but not play.
Do not insert two discs or more.
Touch the icon [ ] on main interface to enter the following CD interface:
5.BT music
Touch the icon
in BT interface to enter BT music interface.
Previous song
Next song
Touch Menu Function Description
Play/pause
Stop Next menu
Long press the fast forward / rewind playback
Short press previous/next song
Play/Pause
Switch play order
Repeat play
Number keypad
title menu
Next menu
Zoom in
Subtitle
Video angle Sound track
Root Menu
Note: Video angle, Sound track and Subtitle function are based on the support of video files.
06
6.Phonebook
Tap the icon [
] in BT interface, the dialogue box “Sure to
download records” will pop up on the screen; Touch [
] to
download the phone numbers in your mobile to the phone book of
the machine.
09
Multimedia function
Radio Function Operation
1. Enter/exit
Touch [Radio]
icon in the main interface to enter into the radio
interface.
After touching the icon[ ] to enter main interface, then touch any
other function icon, the radio mode will exit automatically.
Touch the icon[ ]to return to the upper interface.
Touch the icon[ ]to enter setting interface.
Touch the icon[ ]to show the current volume.
Touch the icon [ ] on radio interface to enter the interface below:
2.EQ setting
Touch the icon [ ] to set sound effect mode.
3.Turn on/off the Long/Short-range
Click [ ]icon, the search pattern in the local search (LOC) and remote
search(DX) switch between.LOC feature is turned on after the signal is strong enough only to listen
to those in good condition and receiving radio station; DX enabled, you can receive remote weak radio
signals.
Note: This function is available only when FM band is selected.
4.Loudness on/off
Click[ ]icon so as to turn on/off loudness function.
5. Stereo on/off
When receiving stereo signals, click[ ] icon to turn on/off stereo.
6.PTY
Touch the button the screen displays program types, users can search station according to program type.
7.TA (Receive traffic information)
ON: When the traffic station is turned on, the radio will automatically search for traffic stations.After
a station is searched, screen displays “TP”. Only when traffic information is broadcasted can it be
received, after traffic information is completed, the radio will automatically switch to the previous mode.
OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically
switch to radio mode, after the traffic announcement is completed, it will automatically switch to the
previous mode
8.AF
Touch the button to turn the AF function on/off. AF function is turned on, When the received station
signals become weak, the radio will automatically fine-tune to other frequencies. When receiving an
emergency announcing, the screen will display warning message.
Note: If the unit does not have RDS function, it has no PTY/TA/AF function.
9.Band switching
Touch the icon[ ] on radio interface to switch the bands among AM1、AM2、FM1、FM2、FM3
10.Search/Store/Scan stations
Short-press the icon[ ] on the radio interface to browse the pre-stored stations, long-press this button
to search stations and store the strongest signal station on the screen.
Press the icon [ ] on the radio interface to search the next station.
Press the icon [ ] on the radio interface to search the previous station.
07
SD/USB storage device
When connected with an external SD/USB storage device, the unit may
playback the music/image/video files in it.
Return to current playing interface
Click the icon [
] in SD/USB main menu to switch to current playing
interface quickly.
Music playing
Play the music files in SD/USB device; Click the icon [
previous file list page.
Click the icon [
] to enter music playing interface.
Touch the icon [
] in SD/USB main menu to return to the
] in SD/USB music interface to enter the interface below:
Touch the two icons [ ] /[ ]to preview the files upwards/downwards; Click the icon [
the current file.
Image playing
Click the icon [ ] in SD/USB main menu to enter image playing interface:
] to play
Touch this icon to rotate the image.
Touch this icon to switch special effects.
Under image-playing status, touch this icon to enable MP3 music playing and retouch this icon to
disable the music playing.
Video playing
Tap the icon [
] in SD/USB main menu to enter video playing interface; for video playing function
instruction, please refer the section “Disc function operation”
08