Installation instructions Sliding door fittings Runway Installation
Transcrição
Installation instructions Sliding door fittings Runway Installation
Complete-set Screw on 1x 6” 4x D= 3/1 2x D= 9/3 2x D= 1/8 Screw on 1” 13⁄8” 1¾” 2” ” Drill USO282-25EO USO282-35EO USO282-45EO 2x 1x Installation instructions Sliding door fittings Deeply Move for glass doors ( 5/16” - 1/2”mm ) A max. 118 1⁄8” Dowels 1” Level 2x 5 7⁄8” 215⁄16” B B B min-max 11/16” 215⁄16” 5 7⁄8” 13/16”- 15/16” 13/16”- 1 3⁄16” 1¾” Perpendicular 1x Stopper Measure Mark Stopper Before mounting check the condition of the ceiling/wall and use the correct anchors and screws Visual inspection Tool 1” 3/4” Make door handle clearance so that fingers do not get pinched when the door is used! glass door 5/16” - 1/2” tempered safety glass max. 176 lbs glass door 5/16” - 1/2” mm tempered safety glass max. 176 lbs 2 people required D1 drill holes to be placed according to handle ! X Ø 29⁄16” 5/64” height of profil 1/4” ø (1”) 2” X 315⁄16” 315⁄16” D1 Beyerle US L.L.C. 5126 S Royal Atlanta Dr. , Tucker, GA 30064 Phone (770) 349 - 6324 , Fax (770) 934 - 3384 , mail: [email protected], www.beyerle-us.com 65_30_00.0057_US_deeplymove_032015-jb 9⁄3 12 (1”) passage width D length of profile E 3/32” 11⁄32”-13⁄16” 5/64” 111⁄16” 5/16” Ceiling height R At right angle H door height Never use scouring agents to clean the sliding door fittings; rather use commercially available stainlesssteel cleaners! Measure Clarify questions Installation to be completed by qualified licensed contractor. Be sure to tighten all screw connections one week after starting to use the sliding door fittings! 5/16” - 1/2” 3/ 16 ” Comply with all general safety regulations when installing the sliding door fittings! 1” two-sided strips of felt H door height 2x Attention optional 315⁄16” 11/16” (1”) 5/16” 13/16” Complete-set A Inch B Inch D Inch USO386-1900EF 74 3⁄16” 28 9⁄16” 29 ½” - 35 7⁄16” 28 9⁄16” USO386-2100EF 82 11⁄16” 21 5⁄8” 35 13⁄16” - 39 3⁄8” 21 5⁄8” USO386-2350EF 92 ½” 24 15⁄16” 39 ¾” - 44 1⁄16” 24 15⁄16” USO386-2600EF 102 3⁄8” 28 ¼” 44 ½” - 49 3⁄16” 28 ¼” . Set-Nr. Right to make technical changes reserved - Dimensions in (mm) or (inch) - Version 04.2015 © by ABP-Beyerle GmbH E Inch ceiling fixture wall fixture ESG-glass max.176 lbs Abb. 1 Abb. 2 1”* ceiling fixture ” 6 /1 11 1 11/16” B ⁄16” 5 1 2 5 7⁄8” wall fixture 15⁄16” 5 7⁄8” 2 B 10 B B Abb. 3 = 1 1” 11/16”* =B 2 2 1” 6” /1 11 2” *USO282-25EO Abb. 6 1” 2” Abb. 7 2 Ø 3⁄16” 2 3/16” t 5⁄32”x 19⁄16” /1 11 6” 1” Abb. 5 =B 1” 2” 3⁄16”x 13⁄16” Abb. 4 1 2 1” (optional) 5/16” - 1/2” 3/16” t 3/32” D D 1 Abb. 8 2 11/16” 2” t = 5⁄16” 3⁄8” ½” D = 9⁄32” 3⁄16” 1⁄8” Abb. 10 Abb. 9 3 1 Mounting of the rollers always facing the wall t = 5⁄16” 3⁄8” ½” D = 9⁄32” 3⁄16” 1⁄8” Abb. 11 Abb. 12 3 1/16” 1 Abb. 13 1/16” (optional) 1 1 4 4 2 2 2 1” Z(1”) Abb. 14 Right to make technical changes reserved - Dimensions in (mm) or (inch) - Version 01.2015 © by ABP-Beyerle GmbH Abb. 15 Z(1”) Abb. 16 Sliding door fitting Deeply Move for glass door ( 5/16” - 1/2” mm ) Abb. 17