Publications 99-04 - idmec

Transcrição

IDMEC/IST (1999-2004)
Books:
1.
Arlindo Silva, Carlos Tavares Ribeiro, João Dias e Luís Sousa, “Desenho Técnico
Moderno – Mecânica e Civil”; 4th Edition, Editora Lidel, ISBN 972-757-337-1 ,
2004.(in Portuguese).
2.
B. Topping & C.A. Mota Soares, Proceeding of The Seventh International
Conference on Computational Structures Technology, Saxe-Coburg Publications,
2004.
3.
B. Topping & C.A. Mota Soares, Proceedings of The Fourth International
Conference on Engineering Computational Technology, Saxe-Coburg Publications,
2004.
4.
B.H.V. Topping and C.A. Mota Soares, Progress in Computational Structures
Technology, Saxe-Coburg Publications, 2004.
5.
B.H.V. Topping and C.A. Mota Soares, Progress in Engineering Computational
Technology, Saxe-Coburg Publications, 2004.
6.
C.A.Mota Soares & J.I. Barbosa, Computational Mechanics in Portugal, Special
Issue of the International Journal of Computer & structures, 2004.
7.
CA Mota Soares, AL Baptista, G. Bugeda, M Casteleiro, JM Goicolea, JAC
Martins, CAB Pina, HC Rodrigues (Eds) "Metodos Computacionais em
Engenharia", APMTAC-SEMNI, LNEC, Lisboa, 2004.
8.
J. Holnicki-Sulcz & C.A. Mota Soares, Advances in Smart Technologies in
Structural Engineering, Springer, 2004
9.
J.R. Caldas Pinto, Técnicas de Automação, Lidel, 2004
10. Reis, P. M., T. Domingos, A. C. Freitas, A. C. Macedo, J. J. B. L. Trigueiros, F. X.
Malcata (2004). PROdução, por Tecnologias Optimizadas, de LACticínios
Tradicionais CertificadoS – PROTOLACTIS. Universidade Católica Portuguesa –
Escola Superior de Biotecnologia, Porto. ISBN 972-98476-8-1.
11. Sousa, J.M.M. – “Using Meso-Scale Modelling for the Prediction of Wind
Resources in Portugal”, New and Renewable Energy Technologies for Sustainable
Development, Eds., N.H. Afgan, M.G. Carvalho, Swets & Zeitlinger, pp. 147-158,
2004.
12. “Sustainable Development of Energy, Water and Environment Systems” / [Editors:
Naim H. Afgan, Željko Bogdan, Neven Duić], A.A.Balkema Publishers, Rotterdam,
(2004)
13. G. Tavares, Z. Zsigraiová, V. Semião, M. da G. Carvalho. Municipal Solid Waste
Valorisation As Energy for Isolated Communities, 100% RES, A Challenge for
Island Sustainable Development, Submitted in July 2004.
14. Ambrósio, Jorge (Ed.), Advances in Computational Multibody Dynamics,
Proceedings of the ECCOMAS Thematic Conference on Advances in
1
Computational Multibody Dynamics, IDMEC-IST, Lisbon, Portugal, July 1-4,
2003.
15. Portela, A., Charafi, A., Finite Elements Using Maple - A Symbolic Programming
Approach, 2nd Edition, Springer, Berlin, 2003.
16. Barbosa, Joaquim Infante, Proceedings of the VII – Congresso Nacional de
Mecânica Aplicada e Computacional, editor: Volume I e II – Mecânica dos Sólidos
e Estrutural, Volume III – Mecânica de Fluidos e Tópicos Multidisciplinares,
Volume IV – Aplicações Industriais e Modelação Numérica, edição : Universidade
de Évora, ISBN: 972-778-058-X, 2003.
17. Rodrigues, H., Cerrolaza, M., Doblaré, M., (Eds.) “International Congress on
Computational Bioengineering. Proceedings”, Copy Center, Zaragoza, dep. legal Z2045-2003, 2003.
18. Silva, Arlindo, Dias, João e Sousa, Luís, “Desenho Técnico Moderno”, 3ª Edição,
Editora Lidel, ISBN: 972-757-260-X, 2003.
19. Naim H. Afgan, Maria G. Carvalho, “New and Renewable Technologies for
Sustainable Development”, Swets & Zeitlinger Publishers, A.A. Balkema
Publishers,
Lisse
The Netherlands, 2003.
20. Ambrósio, J., Kris Wisniewski, Computational Aspects of Structures With Large
Rigid Body Motion, Guest editors of Special Issue of the Int. Journal Computer
Assisted Mechanics and Engineering Sciences, 9(3), 2002.
21. Goicolea, J., Bujeda, G. e Soares, Carlos Mota, Métodos Numéricos em
Engenharia, SEMNI, 2002.
22. Rodrigues, H., and Guedes, J.M. (Editors), “ Bone Mechanics: Mathematical and
Mechanical Models for Analysis and Synthesis”, CIM – Centro Internacional de
Matemática, Coimbra, Portugal, 2002.
23. Silva, Arlindo, Dias, J., and Sousa, L., “Desenho Técnico Moderno ”, 2th Edition
(Updated), Editora Lidel, , ISBN: 972-757-260-X, 2002.
24. Maia, N. M. M., Silva, J. M. M., Ribeiro, A. M. R.Proceedings Book and CD of the
International Conference on Structural Dynamics Modelling, 696 pp., Funchal,
Madeira, Portugal, June 2002
25. João M. C. Sousa and U. Kaymak. Fuzzy Decision Making in Modeling and Control
(World Scientific Series in Robotics and Intelligent Systems – Volume 27). World
Scientific Publishing Co. December 2002, ISBN 981-02-4877-6, 356pp.
26. José M. G. Carvalho Ferreira, Tecnologia da Pulverometalurgia, Edition
Fundação Calouste Gulbenkian, ISBN 972-31-0974-3, Lisbon, 2002.
27. Adrian, R.J., Durão, D.F.G., Durst, F., Heitor, M.V., Maeda, M. and Whitelaw, J.H.
(2002), Laser Techniques for Fluid Mechanics, Springer Verlag, 566 pages, ISBN:
3-540-42837-2, Berlin.
2
28. Dubrovnik Conference on Sustainable Development of Energy, Water and
Environment Systems, Book of Abstracts of Dubrovnik Conference on Sustainable
Development of Energy, Water and Environment Systems, Dubrovnik, June 2-7
2002. / [chief editor Neven Duic], Energetika marketing, Zagreb, (2002).
29. Sarmento, M. (2002), Gestão pela Qualidade Total na Indústria do Alojamento
Turístico – Casos Práticos sobre a Avaliação da Qualidade da Gestão e da
Satisfação do Cliente, Lisboa: Escolar Editora. (o livro tem o apoio da Fundação
para a Ciência e a Tecnologia em 2002, estando para impressão na gráfica).
30. Sarmento, M. (2002), “A Sociedade do Conhecimento e a Defesa Nacional”,
AACDN, Caderno n.º 17, ISBN 972-8159-18-8.
31. Portela A, “Charafi, A., “Finite Elements Using Maple - A Symbolic Programming
Approach”, Springer, Berlin, 2002.
32. Silva A, Dias J and Sousa L, “Desenho Técnico Moderno”, Editora Lidel, , ISBN:
972-757-189-1, 2001.
33. A Arquitectura Paisagista-morfologia e complexidade, Editorial Estampa, Lisboa,
2001 (livro, 525 pgs)
34. J. L. Martins de Carvalho, J. Sá da Costa, A. D. Correia (ed.), Fundamental Issues
in Control, European Journal of Control, (Special Issue), Vol. 7, No. 2-3, pp. 85348, ISSN 0947-3580, 2001.
35. J. L. Martins de Carvalho, J. Sá da Costa, M. Ayala Botto, J. Sousa, F. Fontes (ed.),
Proc. ECC’01 – Student Forum, Porto, Portugal, ISBN: 972-752-048-0, Sept. 2001.
36. Ambrósio J and Kleiber M, “Computational Aspects Of Nonlinear Structural
Systems With Large Rigid Body Motion”, IOS Amsterdam, Amsterdam, The
Netherlands, 2001.
37. Ambrósio J, “Crashworthiness: Energy Management and Occupant Protection”,
Springer-Verlag, Wien, Austria, 2001.
38. Suleman A, “Smart Structures and Related Technologies”, CISM Courses and
Lectures No. 429, Springer Verlag Wien New York, Novembro 2001.
39. Maia, N.M.M., "Introdução à Dinâmica Analítica" (“Introduction to Analytical
Dynamics). Text book, IST-Press, Oct. 2000.
40. High-Quality Steel Rolling: Theory and Practice. Metallurgical Industry Press,
Beijing, 2000
41. Afgan, N. H. and Carvalho, M. G., “Sustainable Assessment Method for Energy
Systems - Indicators, Criteria and Decision Making Procedure”– N. H. Afgan and
M. G. Carvalho, Kluwer Academic Publishers, USA (180 pag.), 2000
42. Ambrósio J and Michal K, (Eds.), “Computational Aspects Of Nonlinear Structural
Systems With Large Rigid Body Motion”, Proceedings of the NATO-ARW on
Computational Aspects Of Nonlinear Structural Systems With Large Rigid Body
Motion, IDMEC-IST, Pultusk, Poland, July 2-7, 2000
3
43. Soares C A, Soares C M & Freitas M, Special Issue of Computers & Structures,
Vol. 76, Pergamon/Elsevier Science Ltd, United Kingdom, 2000.
44. F. Muge, Caldas Pinto, M. Piedade (ed). Proceedings of 5th IberoAmerican
Symposium on Pattern Recognition - SIARP, 2000.
45. J.C. Ferreira, "Tecnologia da Fundição", edition Fundação Calouste Gulbenkian.
Edição, ISBN 972-31-0837-2, Dep. Legal N.º 136 710/99, Lisbon, June 1999.
46. Autoria de Livro, no domínio da Computação Gráfica, com a produção dos
capítulos referentes a Modelação, Cor e Geração de Imagens por Ray Tracing e
Radiosidade.
47. Ambrósio J, Schiehlen W, “Advances in Computational Multibody Systems”,
Proceedings of the EUROMECH Colloquium on Advances in Computational
Multibody Dynamics, IDMEC-IST, Lisbon, Portugal, 1999.
48. Soares C A, Soares C M & Freitas M, “Mechanics of Composite Materials and
Structures”, Kluwer Academic Publishers, Dordrecht, 1999.
49. Silva, J.M.M. and Maia, N.M.M., editors, "Modal Analysis and Testing", Kluwer
Academic Publishers, NATO Science Series (Series E, Applied Sciences - Vol.
363), 1999.
Books Chapters:
18. C. A. Mota Soares, C. M. Mota Soares, I.F. Pinto Correia,”Modelling of Laminated
Shells with Integrated Sensors And Actuators”, Progress in Computational
Structures Technology, Ed. B.H. V. Topping and C. A. Mota Soares, Saxe-Coburg
Publications, Stirling, Scotland, UK, Chapter 11, pp 281-309, 2004.
19. H. Rodrigues, P. R. Fernandes, “Optimization Models in the Simulation of Bone
Adaptation Process”, in Computational Bioengineering – Current Trend and
Aplicattions, M. Cerrolaza, M. Doblaré, , G. Martínez and B Calvo (Eds.), Imperial
College Press, London, 2004.
20. J. P. Dias and M. S. Pereira,” Multicriteria Optimization of Train Structures for
Crashworthiness”, in Advances in Computational Multibody Dynamics, Edited by
Jorge Ambrósio, Springer Verlag, 2004. (in print).
21. P. R. Fernandes, J Folgado “A computational model to analyse the bone behaviour
after a Total Hip Arthroplasty”, in Computational Modelling of Tissue Surgery, M.
Zeman and M. Cerrolaza (Eds.), WIT Press, UK, 2004 (in print)
22. C.D. Bocaniala and J. Sa da Costa, A New Fuzzy Classification Methodology
Applied to Fault Diagnosis, In: “Computational Intelligence in Fault Diagnosis”,
Eds. V. Palade and L.C. Jain, Springer-Verlag. Accepted for publication.
23. C.D. Bocaniala and J. Sa da Costa, Causal Models for Distributed Fault Diagnosis
of Complex Systems, In: “Computational Intelligence in Fault Diagnosis”, Eds. V.
Palade and L.C. Jain, Springer-Verlag. Accepted for publication.
4
24. V. Geraldes, V. Semião e M.N. Pinho Optimization of ladder-type spacers for
nanofiltration and reverse osmosis spiral-wound modules by Computational Fluid
Dynamics,European Symposium on Computer-Aided Process Engineering-14, A.
Barbosa-Póvoa e H. Matos Editors, Elsevier, Amsterdão, 2004, pp. 178-192.
25. Ambrósio, Jorge, Impact of Rigid and Flexible Multibody Systems: Deformation
Description and Contact Models, in Virtual Nonlinear Multibody Systems, (Michael
Valasek, Werner Schiehlen, eds.), Kluwer Academic Publishers, Dordrecht,
Netherlands, 57-81, 2003.
26. Ambrósio, Jorge, Multibody Systems Dynamics Methodologies for
Crashworthiness, in Advances in Dynamics and Impact Mechanics (C. Brebbia and
G. Nurick, Ed), WIT Press, Southampton, United Kingdom, 115-142, 2003.
27. Bendsøe, M. P., Guedes, J. M. , Neves, M. M., Rodrigues, H. C., e Sigmund O.,
“Aspects of the design of microstructures by computational Means”, in Gakuto
International Series Mathematical Sciences and Applications vol. 18:
Homogenization 2001, L. Carbone e R. Arcangelis (eds), Gakkotosho, Tokyo,
Japan, 2003.
28. Dias, J. P. e Pereira, M. S., ”Optimization of Rigid-Flexible Multibody Systems
With Application to Vehicle Dynamics and Crashworthiness”, em Virtual
Nonlinear Multibody Systems, pág. 363-382, Editado por W. Schiehlen e M.
Valášek, Kluver, Dordrecht, The Netherlands, 2003.
29. Rodrigues, H., Fernandes, P. R. e Guedes, J. M., “Modelos de Optimização de
Material Aplicados à Simulação do Processo de Remodelação Óssea”, in
Bioingeniería en Iberoamerica – Avances y Desarrollo, C. Müller-Karger and M.
Cerrolaza (Eds.), CIMNE, Barcelona, Cap. 15, pp. 381-406, 2003.
30. Advani, S.G. Dimitrovová, Z., Role of Capillary Driven Flow in Composite
Manufacturing, in Surface Tension; Measurement, Theory and Application, ed. S.
Hartland, (in press).
31. Guedes, J.M. , “Homogenization Models”, in “Bone Mechanics: Mathematical and
Mechanical Models for Analysis and Synthesis”, H. Rodrigues e J M Guedes
(Eds), CIM - Centro Internacional de Matemática, Coimbra, Portugal, 2002.
32. Loja, M.A. Ramos, Soares, C.M. Mota, Soares, C.A. Mota, “Recent Developments
in Modeling and Design of Laminated and Piezolaminated Structures by the Finite
Strip Method”, Computacional Structures Technology, Ed. B.H.V. Topping and Z.
Bittnar, Saxe-Coburg Publication, Stirling, Scotland, Chapter 8, pp 197-220, 2002.
33. Rodrigues, H., Fernandes P. R. And Guedes, J. M., “Modelos de Optimização de
Material Aplicados à Simulação do Processo de Remodelação Óssea”,
Bioingeniería en Iberoamerica, C. Muller-Karger and M. Cerrolaza (Eds.), in print,
2002.
34. Rodrigues, H.,“Material Optimization and Bone Remodelling”, in “Bone
Mechanics: Mathematical and Mechanical Models for Analysis and Synthesis”, H.
Rodrigues e J M Guedes (Eds), CIM - Centro Internacional de Matemática,
Coimbra, Portugal, 2002.
5
35. Magalhães, M. R., N. Cortez, M. M. Abreu, J. M. Conceição, S. Raichande (2002).
Morfologia da Paisagem Metropolitana. In “Atlas da Área Metropolitana de
Lisboa” ,JML (in press).
36. N. Duić, L.M. Alves, M.G. Carvalho: Kyoto Protocol Objectives by Promoting the
Technology Transfer to Small Island Developing Countries: Santo Antao, Cape
Verde, New and Renewable Technologies for Sustainable Development [Eds: N.H.
Afgan, M.G. Carvalho], Kluwer Academic Publishers, Boston, Dordrecht, London,
105-116 (2002)
37. N. Duić, F. Juretić, M. Zeljko, Ž. Bogdan: Kyoto Protocol Objectives in Croatia
Energy Planning, New and Renewable Technologies for Sustainable Development
[Eds: N.H. Afgan, M.G. Carvalho], Kluwer Academic Publishers, Boston,
Dordrecht, London, 221-231 (2002)
38. Sarmento, M., Santos, C. e Vellas, F. (2002), “Tourisme Soutenable et Competitive:
Le Cas des Îles des Azores”, in François Vellas e Jacques Spindler (eds.), Le
Tourisme au XXI Siècle. Paris: Serdi Publication (capítulo aceite para publicação
no livro).
39. Advani S, Dimitrovová Z, “Role of Capillary Driven Flow in Composite
Manufacturing, in Surface Tension; Measurement, Theory and Application”, S.
Hartland (ed), accepted for publication (2001).
40. Ambrósio J,”Geometric and material nonlinear deformations in flexible multibody
systems, in Computational Aspects Of Nonlinear Structural Systems With Large
Rigid Body Motion”, Jorge Ambrósio, Michal Kleiber (Eds), IOS Amsterdam,
Amsterdam, Netherlands, 3-28, 2001.
41. Ambrósio J, “Multibody Dynamics Tools for Structural and Biomechnics
Crashworthiness” (Part IV), in Crashworthiness: Energy Management and
Occupant Protection, (Jorge Ambrósio, Ed), Springer-Verlag, Wien, Austria, 203302, 2001.
42. Graça M, “Simple accelerators for logarithmic fixed point sequences, in Problems”
in Applied Mathematics and Computational Intelligence, N. Mastorakis Ed., World
Scientific and Eng. Press, 82-86, 2001.
43. Suleman A., “Adaptive Composite Systems and Applications”, The Encyclopedia
of Smart Materials, John Wiley & Sons, Inc, Editor-in-Chief: James A. Harvey,
2001
44. Silva, J.M.M., "Modal Analysis, Experimental: Measurement Techniques",
“Encyclopedia of Vibration”, Academic Press, Harcourt Publishers Ltd., Vol. II, pp.
813-820, July 2001.
45. Maia, N.M.M., “Parameter Extraction Methods”, “Encyclopedia of Vibration”,
Academic Press, Harcourt Publishers Ltd., Vol. II, pp. 820-824, July 2001.
46. Maia, N.M.M., “Construction of a Model from Experimental Results”,
“Encyclopedia of Vibration”, Academic Press, Harcourt Publishers Ltd., Vol. II, pp.
824-829, July 2001.
6
47. Elfes, A.; Bergerman, M.; Bueno, S. S.; Ramos, J.G.; de Paiva, E.C. ; Bergerman,
M.; Carvalho, J. R. H.; Maeta, S.M.; Mirisola, L.G.B.; Faria, B.G.; Azinheira, J.R.
“Perception and control for an autonomous robotic airship.” In Modelling of
Sensor-Based Intelligent Robot Systems, Bunke, H., Christensen, H. I., Hager, G.,
and Klein, R. (eds.), Springer-Verlag, New York, November 2001, pp. 225-254.
(Invited article in Dagstuhl 2000 International Seminar on Modelling of SensorBased Intelligent Robot Systems, Schlöss Dagstuhl, Germany.)
48. Ambrósio J, “Impact of Structures and Rigid Bodies Undergoing Large Rotations
for Vehicle Applications”, in Impact and Friction of Solids, Structures and
Intelligent Machines, (Arde Guran Ed.) Birkhauser, Boston Massachussetts, 261272, 2000
49. Bendsøe M; Neves M; Sigmund O, “Some recent results on topology optimization
of periodic composites”, G.I.N. Rozvany and N. Olhoff (eds.). Topology
Optimization of Structures and Composite Continua, 3-17, Kluwer Academic
Publishers, 2000.
50. Dias J, “Projecto de Componentes Estruturais de Veículos com Base em
Formulações de Sistemas Mecânicos Rígido-Flexíveis”, Prémio Cientifico IBM
1990-1999, pág 423-461, Edição IBM Portugal, 2000.
51. Fernandes P, “Simulação do Processo de Adaptação do Osso Trabecular” in Prémio
Científico IBM 1990 a 1999, Companhia IBM Portuguesa SA, 317-346, 2000.
52. Rodrigues H, Miranda P e Guedes J, "Optimization of the porous coating
distribution in non-cemented hip prostheses", in Topology Optimization of
Structures and Composite Continua, G.I.N. Rozvany and N. Olhoff , (eds), Kluwer
Academic Publishers, 2000.
53. Soares C A, Soares C M and Correia V, “Modeling and Design of Laminated
Composite Structures with Integrated Sensors and Actuators”, Ed. B.H.V. Topping,
Computational Mechanics for the Twenty-First Century, SAXE-COBURG
Publications, Edinburgh, Scotland, Chapter 9, 165-185, 2000.
54. Luís Maltez, Ricardo Oliveira – “Engenharia e Tecnologia 2000”, a prospective
study of the impact of engineering and technology in Portugal 2000/2020 – chapter
on Engineering Services, Lisbon 2000
55. Sousa, J.M.M., Freek, C., Pereira, J.C.F. (2000) PIV Measurements of Turbulence
Statistics in the Three-Dimensional Flow Over a Surface-Mounted Obstacle, Laser
Techniques Applied to Fluid Mechanics, Eds., R.J. Adrian, D.F.G. Durão, F. Durst,
M.V. Heitor, M. Maeda, J.H. Whitelaw, Springer-Verlag, pp. 157-176
56. Ambrósio J, Lopes G, Silva M, “Reconstruction of the Spatial Motion of
Biomechanical Systems by Means of Computer Vision and Multibody Dynamics”,
in Advances in Multibody Systems and Mechatronics, (A.Kecskemethy,
M.Schneider and C.Woernle, Eds), Institute fur Mechanik und Getriebelehere,
Technische Univ. Graz, Austria, 407-426, 1999.
57. Correia V, Soares C M and Soares C A, “Optimal Design of Composite Structures
with Integrated Piezoelectric Laminae”, Ed. C.A. Mota Soares, C.M. Mota Soares
7
and M.J.M. Freitas, Mechanics of Composite Materials and Structures, Kluwer
Academic Publishers, Dordrecht, 389-408, 1999.
58. Silva, J.M.M., “An Overview of the Fundamentals of Modal Analysis”, chapter 1 of
the book "Modal Analysis and Testing", Kluwer Academic Publishers, NATO
Science Series (Series E, Applied Sciences - Vol. 363), pp. 1-34, 1999.
59. Silva, Fernando; Almas, E., "Segurança Rodoviária: Sistemas de Travagem de
Veículos Pesados", pp. 239-244 do 1º Volume de ESTRADA 2000-1º Congresso
Rodoviário Português - A Qualidade
60. Maia, N.M.M., “Modal Identification Methods in the Frequency Domain”, chapter
6 of the book "Modal Analysis and Testing", Kluwer Academic Publishers, NATO
Science Series (Series E, Applied Sciences - Vol. 363), ISBN 0-7923-5893-7, pp.
251-264, 1999.
61. Bart Wams, Miguel Ayala Botto, Ton van den Boom, José Sá da Costa, “LMIs for
robust stable neural model-based control”, In Stability and Stabilization of
Nonlinear Systems, edição de Dirk Aeyels, Françoise Lamnabhi-Lagarrigue e Arjan
van der Schaft, Lecture Notes in Control and Information Sciences, Vol. 246,
Chapter 19, pp. 375-387, Springer-Verlag, London, July 1999.
62. J.M. Sousa, U. Kaymak and H.B. Verbruggen. Performance criteria – classical and
fuzzy design. In Fuzzy algorithms for control. Kluwer Academic Publishers, pages
159-183, 1999.
63. M. Ayala Botto, T. van den Boom, J. Sá da Costa, “Stability analysis to parametric
uncertainty: extension to the multivariable case”, In Nonlinear Control in the Year
2000, editors Alberto Isidori, Françoise Lamnabhi-Lagarrigue and Witold
Respondek, Lecture Notes in Control and Information Sciences, Vol. 258, pp. 93102, Springer-Verlag, 2000, ISBN: 1-85233-363.
64. Rui Casimiro, Ruy Mesquita, “Projecto para a desmontagem/reciclagem: a
perspectiva da indústria de componentes automóvel” (Design for
disassembly/recycling: the perspective of the automotive components industry), in
“A ecologia industrial e o automóvel em Portugal” (Ecology and automotive
industry in Portugal), ed. by P.C. Ferrão and J.M. Figueiredo
65. Ruy Mesquita, Paulo Peças, Sales Gomes, “Situação e tendências dos sectores
analisados: Metalomecânica”, in “A Engenharia e a Tecnologia ao Serviço do
Desenvolvimento em Portugal”, L. Valadares Tavares
66. Ruy Mesquita, Paulo Peças, Sales Gomes, “Análise Prospectiva, Prospectiva e
Propostas para os Sectores em Análise: Metalomecânica”, in “A Engenharia e a
Tecnologia ao Serviço do Desenvolvimento em Portugal”, L. Valadares Tavares
67. Carvalho, M.G., Fiveland, W.A., Lockwood, F.C. and Papadopoulos, C.,
[Ed]"Combustion Technologies for a Clean Environment", Vol. 2, Partes A e B, da
série "Energy, Combustion and the Environment" - Gordon and Breach Science
Publishers, E.U.A. (1152 Pag.),1999
8
Papers in Refereed International Journals:
1.
Rocha, A., Moniz, P.A., Costa, A.P., and Suleman A., “On Active Aeroelastic
Control of an Adaptive Wing Using Piezoelectric Actuators”, Engineering Notes,
Journal of Aircraft, Vol. 41, No. 6, Nov-Dec 2004.
2.
Suleman, A., and P. Costa, “Adaptive Control of an Aeroelastic Flight Vehicle
Using Piezoelectric Actuators” Computers and Structures, Vol. 82, pp 1303-1314,
2004.
3.
Sedaghati, R., and A. Suleman, “Maximum Limit Load Design Optimization of
Shallow Frame Structures Undergoing Large Defections,” AIAA Journal, Vol. 42,
No. 10, 2004
4.
Suleman A., “Nonlinear Multibody Dynamics and Control of Flexible Space
Structures,” Journal of Vibration and Control, in press, 2004
5.
Suleman A., and Sedaghati A., “Benchmark Case Studies in Nonlinear Structural
Optimization,” Structural Optimization, in press, 2004.
6.
Leontiev, R. S. Busse, J. Herskovits, W. Huacasi & C.M. Mota Soares,
“Identification of the groundwater table location in the forest impact problem”,
Communications in Numerical Methods in Engineering,Vol. 20, pp. 585-594,
2004.
7.
C. Barbarosie C and M. M. Neves, "Periodic structures for frequency
and
optimization filtering: analysis", Computers and Structures, 82 1399-1403, 2004.
8.
Dias, J. P. and Pereira, M. S.,” Optimization Methods for Crashworthiness Design
using Multibody Models”, Computers & Structures, Vol. 82, pp. 1371-1380, 2004.
9.
I.F.Pinto Correia, C.M. Mota Soares, C.A.Mota Soares & J.Herskovits ”Analysis of
Laminated Adaptive Shell Structures Using Higher Order Models”, Composite
Structures, Elsevier, UK, Vol. 66(1-4), pp 261-268 , 2004
10. J. F. Aguilar Madeira, H. Rodrigues and Heitor Pina, “Multi-Objective
Optimization of Structures Topology by Genetic Algorithms”. Advances in
Engineering Software (in print, 2004).
11. J. Folgado, P. R. Fernandes and H. Rodrigues, “Topology Optimization of ThreeDimensional Structures under Contact Conditions”, Journal Structural and
Multidisciplinary Optimization, (submitted 2004).
12. J. Folgado, P. R. Fernandes, J. M. Guedes and H. Rodrigues, “Evaluation of
osteoporotic bone quality by a computational model for bone remodeling”,
Computers & Structures, 82, pp.1381-1388, 2004.
13. J. Herskovits, V. Dubeux, C.M. Mota Soares, A.L. Araújo, “Interior Point
Algorithms for Non-linear Constrained Least Square Problems”, Journal of Inverse
Problems in Science and Engineering Vol. 12(2): 221-223, 2004.
14. J. M. Simões Moita, I. F. Pinto Correia, C.M. Mota Soares, C.A. Mota Soares,
“Active Control of Adaptive Laminated Structures with Integrated Piezoelectric
9
Sensors and Actuators”, Computers & Structures, Elsevier, UK, 82 (17 -19), pp
1349-1358, 2004.
15. J. Romero, P. Mappa, J. Herskovits & C.M. Mota Soares, “Optimal Truss Design
Including Plastic Collapse Constraints”, Structural and Multidisciplinary
Optimization , Springer,Vol.27 (1-2), pp 20-26, 2004.
16. J.E. Semedo Garção, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, “Analysis
of Laminated Adaptive Structures Using Layerwise Finite Element Models”,
Computers & Structures, Elsevier, UK, Vol. 82( 23-36), pp 1939-1959, 2004.
17. João Gonçalves and Jorge Ambrosio, Optimization of Vehicle Suspension Systems
for Improved Comfort of Road Vehicles Using Flexible Multibody Dynamics,
Nonlinear Dynamics, 34(1-2), 113-131, 2004.
18. Jorge Ambrosio and Miguel Silva, Structural and Biomechanics Crashworthiness
Using Multi-Body Dynamics, Journal of Automobile Engineering, 218(D6), 629646, 2004.
19. Maria Augusta Neto, Jorge A.C. Ambrósio, Rogério Pereira Leal, Flexible
Multibody Systems Models Using Composite Materials Components, Multibody
Systems Dynamics, (Accepted for publication 2004).
20. Miguel Silva e Jorge Ambrósio, Sensitivity of the Results Produced by the Inverse
Dynamic Analysis of a Human Stride to Perturbed Input Data, Gait and Posture,
19(1), 35-49, 2004.
21. P. R. Fernandes, J. Folgado and R. B. Ruben, “Shape optimization of a cementless
hip stem for a minimum of interface stress and displacement”, Computer Methods
in Biomechanics and Biomedical Engineering, 7, no 1, pp.51-61, 2004.
22. Paulo Flores and Jorge Ambrósio, Kinematic Joints With Clearances in Multibody
Dynamics, Computers and Structures, 82(17-19), 1359-1369, 2004
23. Paulo Flores, Jorge Ambrósio and J. Pimenta Claro, Dynamic Analysis For Planar
Multibody Mechanical Systems With Lubricated Joints, Multibody Systems
Dynamics, (Accepted for publication 2004).
24. Pavel Antos and Jorge A. C. Ambrósio, A Control Strategy Of A Vehicle
Multibody Model For Trajectory Tracking, Multibody Systems Dynamics, 11(4),
365-394, 2004.
25. Pereira, M. S., Dias, J. P., “Analysis and Design for Train Crashworthiness Using
Multibody Models”, Vehicle System Dynamics, 2004 (in press).
26. R. Garcia Lage, C.M. Mota Soares, C.A. Mota Soares, J.N. Reddy, “Modelling of
Piezolaminated Plates using Layerwise Mixed Finite Elements”, Computers &
Structures, Elsevier, UK, Vol. 82 (23-36), pp 1849-1863, 2004.
27. R.Garcia Lage, C. M. Mota Soares, C. A. Mota Soares & J. N. Reddy, “Analysis of
Adaptive Plate Structures by Mixed Layerwise Finite Elements “, Composite
Structures, Elsevier,UK, Vol . 66(1-4),pp 269-276, 2004.
10
28. R.Garcia Lage, C. M. Mota Soares, C.A. Mota Soares & J.N.Reddy,”Layerwise
Partial Mixed Finite Element Analysis of Magneto-Electro-Elastic Plates”,
Computers & Structures, Elsevier, UK, 82 (17-19) , pp 1293-1301, 2004.
29. Sine L. Pedersen, John M. Hansen and Jorge A.C. Ambrósio, A Roller Chain Drive
Model Including Contact With Guide-Bars, Multibody Systems Dynamics,
(Accepted for publication 2004).
30. Montalvão, D., Ribeiro, A.M.R., Maia, N.M.M., Silva, J.M.M., " Estimation of the
Rotational Terms of the Dynamic Response Matrix", Journal of Shock and
Vibration, Special Issue dedicated to Professor Bruno Piombo, Vol 11, Nos. 3, 4,
2004, pp. 333-350.
31. R. Galvão, V. Becerra, J. Calado and P. Silva (2004), "Linear-Wavelet Networks",
International Journal on Applied Mathematics and Computer Science, Vol. 14,
No.12, pp. 221-232.
32. S. Impram, Miguel Ayala Botto, José Sá da Costa, “Robust pole placement
controller design for the flexible transmission system'', Control and Intelligent
Systems, Vol. 32, No 3, pp. 167-175, 2004.
33. L.F. Mendonça, J. M. Sousa e J.M.G. Sá da Costa. Optimization problems in
multivariable fuzzy predictive control. In International Journal of Approximate
Reasoning, 36(3): 199-221, Julho 2004.
34. Xiong S., Rodrigues J. M. C. and Martins P. A. F., “Application of the Element
Free Galerkin Method to the Simulation of Plane Strain Rolling”, European Journal
of Mechanics – A/Solids, Vol. 23, 77-93, 2004.
35. Rosa P. A. R., Baptista R. M. S. O., Rodrigues J. M. C. e Martins P. A. F., “An
Investigation on the External Inversion of Thin-Walled Tubes using a Die”,
International Journal of Plasticity, Vol. 20, 1931-1946, 2004.
36. Rosa P. A. R., Rodrigues J. M. C. and Martins P. A. F., “Internal Inversion of ThinWalled Tubes Using a Die: Experimental and Theoretical Investigation”,
International Journal of Machine Tools & Manufacture, Vol. 44, 775-784, 2004.
37. Santos I. O., Zhang W., Gonçalves V. M., Bay N. and Martins P. A. F., “Weld
Bonding of Stainless Steel”, Journal of Machine Tools & Manufacture, Vol. 44,
1431-1439, 2004.
38. V.Gonçalves, M. Napoleão, “Zinc Coated Steel Resistance Spot Welding, Part 2 –
Thermal Input and Mechanical Tests”, Sodura XIV – Vol. 1, 5-11, 2004.
39. Paulo Peças, Elsa Henriques, ”Best Practices of Collaboration between University
and Industrial SME´s”, accepted in “Benchmarking: An International Journal”,
ISSN 1463-5771, 2004.
40. Elsa Henriques, “Cutting Parameters Optimisation Model towards the Integration of
Process and Production Planning”, accepted in “The International Journal of
Advanced Manufacturing Technology”, ISSN: 0268-3768, 2004
11
41. Paulo Peças, Elsa Henriques, ”Impacto da Utilização de Aditivos no Dieléctrico de
EDM no Acabamento de Superfícies Moldantes”, accepted in “Revista
Iberoamericana de Ingenieria Mecânica”, 2004.
42. Paulo Peças, Elsa Henriques, Ana Motta, ”Modelo Tecnológico de Custo para a
Maquinagem por Electro-Erosão”, accepted in “Revista Iberoamericana de
Ingenieria Mecânica”, 2004.
43. Paulo Peças, Elsa Henriques, ”Impact Estimation of the Intrinsic Innovations on
Electric-Discharge Machining Technology”, submitted to “The International
Journal of Materials Processing”, Junho, 2004.
44. Elsa Henriques, ”The Contribution of the Optimization of Cutting Parameters for
Synchronous Manufacturing” submitted to “The International Journal of Flexible
Manufacturing Systems”, Setembro, 2004.
45. Silva, M.B., Baptista, R.M.S.O., Martins, P.A.F., Stamping of Automotive
Components: a Numerical and Experimental Investigation, aceite para publicação
no Journal of Materials Processing Technology, 2004.
46. Pires I., Quintino L., R. Miranda; “Performance of 2024-T3 Aluminium Bonded
Joints”; aceite para publicação no Materials and Manufacturing Processes, vol 20,
n. 4, 2005, submetido em 2004.
47. Rosa Miranda, Luisa Quintino, “Microstructural Study of Material Removal
Mechanisms Observed in Abrasive Waterjet Cutting of Calcareous Stones”
submetido para publicação no Materials Characterization Journal., Setembro 2004.
48. L. Quintino, I.Pires, ”Overview of the Technology of Adhesive Bonding in Medical
Applications”; Business Briefing: Medical Devices Manufacturing and
Technologym, Agosto 2004.
49. Danut Iordachescu, Luisa Quintino, Rosa Miranda, Gervasio Pimenta, “Influence of
Shielding Gases and Process Parameters on Metal Transfer and Bead Shape in MIG
Brazed Joints of the Thin Zinc Coated Steel Plates”, submetido para publicação no
Journal of Materials & Design, Julho 2004.
50. Iordachescu D., Quintino L., Pimenta G., R. M. Miranda., Pepe N., “Influence of of
MIG Brazing Processing Parameters on the Mechanical, Corrosion and
Metallurgical Properties of Galvanised Thin Sheet Joints for Automotive”, enviado
para publicação na revista International Journal of Machine Tools and Manufacture
em 2004.
51. C. Boynard, P. Barros, L. Quintino, “Potencial de Aplicação da Técnica de TOFD
(Time of Flight Diffraction) no Controle não Destrutivo de Construção Soldada”,
“Soldagem & Inspeção”, Ano 9, n. 1, pp. 1-11, Março 2004.
52. A.Costa, L. Quintino, R. M. Miranda, “Materials behaviour in laser welding of hard
metals to steel”, submetido para publicação na revista European Welding em 2004.
53. A.G. Ascenço, J. P. Gomes, N. M. Cosme, R. M. Miranda, “Analysis of welding
fume: comparison between two sampling techniques”, enviado para publicação na
revista International Journal of Environmental Health Research em 2004.
12
54. Alves L. M. M., Rodrigues J. M. C.”Modelação numérica e experimental do
forjamento a frio de sinterizados de cobre” , aceite para publicação na revista IberoAmericana de Ingenharia Mecânica, 2004.
55. P.F.Cunha, J.C. Duarte, “Development of a Productive Service Module Based on a
Life Cycle Perspective of Maintenance Issues”, CIRP Annals 2004 – manufacturing
Technology, vol.53/1, 2004, pp.13-16.
56. J.C.C. Henriques, L.M.C. Gato, “A multi-dimensional upwind matrix distribution
scheme for conservative laws”, Computers and Fluids, vol. 33, pp. 755-769, 2004.
57. A.F. de O. Falcão, "Stochastic modelling in wave power-equipment optimization:
maximum energy production versus maximum profit", Ocean Engineering, Vol. 31,
pp. 205-210, 2004.
58. N.P.C. Marques and J.C.F.Pereira (2004). ”Comparison of Matrix-Free
Acceleration Techniques in Compressible Navier-Stokes Calculations”. Accepted
for publication on the J. for Numerical Methods in Engineering, 61: pp 455-474
59. Sousa, J.M.M., Pereira, J.C.F. – “DPIV Study of the Effect of a Gable Roof on the
Flow Structure Around a Surface-Mounted Cubic Obstacle”, Experiments in Fluids,
Vol. 37, pp. 409-418, 2004.
60. Mendes, P.J., Raposo, A., Sousa, J.M.M., Pinto, J.F. – “Sizing of Powders in
Inhalers with Aerosizer® According to a Mixed Experimental Factorial Design”,
Journal of Aerosol Science, Vol. 35, pp. 509-527, 2004.
61. Sousa, J.M.M., Silva, L.M.G. – “Transition Prediction in Infinite Swept Wings
Using Navier-Stokes Computations and Linear Stability Theory”, Computers &
Structures, Vol. 82, No. 17-19, pp. 1551-1560, 2004.
62. C. B. da Silva and J. C. F. Pereira (2004). “The effect of subgrid-scale models on
the vortices computed from Large-Eddy Simulation”. Physics of Fluids, Vol 16, Nº
12.
63. J. C. F. Pereira, T. C. Hayashi, I. Malico, and J. Raposo (2004). “Experimental and
numerical study of the porous foam inlet and exit flows in a straight or sudden pipe
expansion”. Submited to Experimental Thermal and Fluid Sciences.
64. T. Hayashi, I. Malico and J. C. F. Pereira (2003).”Three dimensional modelling of a
two-layer porous burner for household applications”. Accepted for publication on
the Int. J. Computers and Structures.
65. Costa, M., Parente, C. And Santos, A. (2004). Nitrogen oxides emissions from
buoyancy and momentum controlled turbulent methane jet diffusion flames.
Experimental Thermal and Fluid Science, 28, 729-734.
66. Dias, J., Costa, M. And Azevedo, J. L. T. (2004). Test of a small domestic boiler
using different pellets. Biomass and Biofuels, 27, 531-539.
67. Ye, T. H., Azevedo, J., Costa, M. And Semião, V. (2004). Co-combustion of
pulverized coal, pine shells and textile wastes in a propane fired furnace:
measurements and predictions. Combustion Science and Technology, in press.
13
68. Saario, A., Rebola, A., Coelho, P. J., Costa, M. And Oksanen, A. (2004). Heavy
fuel oil combustion in a cylindrical laboratory furnace: measurements and
modeling. Fuel, in press.
69. T. H. Ye, J. Azevedo, M. Costa e V. Semião Co-combustion of pulverized coal,
pine shells and textile wastes in a propane fired furnace: measurements and
predictions, Combustion Science and Technology. Accepted for publication July
2004
70. V. Geraldes, V. Semiao e M.N. Pinho Concentration polarisation and flow structure
within nanofiltration spiral-wound modules with ladder type spacers, Computers
and Structures, 2004, Vol. 2, pp. 1561–1568.
71. Z. Zsigraiová, G. Tavares, V. Semião, M. G. Carvalho. Municipal Solid Waste
Incineration in Europe – Contribution to Sustainable Development of Energy and
Environment, International Journal of Energy. Submitted February 2004.
72. P.J. Coelho, “Detailed Numerical Simulation of Radiative Transfer in a NonLuminous Turbulent Jet Diffusion Flame”, Combustion and Flame, Vol. 136, Nº 4,
pp. 481-492 (2004).
73. P.J. Coelho, “A Modified Version of the Discrete Ordinates Method for Radiative
Heat Transfer Modelling”, Computational Mechanics, Vol. 33, Nº 5, pp. 375-388
(2004).
74. P. J. Gonçalves, L.F. Mendonça, J.M.C. Sousa e J. C. Pinto. Image recognition
applied to robot control using fuzzy modeling. In A. Campilho e M. Kamel,
editores, Lecture Notes in Computer Science 3211, Image Analysis and
Recognition, Proc. International Conference on Image Analysis and Recognition,
ICIAR'2004, pp. 253-260, Porto, Portugal, Setembro/Outubro 2004.
75. J. M. C. Sousa e J. C. Pinto. Comparison of intelligent classification techniques
applied to marble classification. In A. Campilho e M. Kamel, editores, Lecture
Notes in Computer Science 3211, Image Analysis and Recognition, Proc.
International Conference on Image Analysis and Recognition, ICIAR'2004, pp.
802-809, Porto, Portugal, Setembro/Outubro 2004.
76. M. Ayalla Botto, J.M. Sousa e J.M.G. Sá da Costa. Intelligent active noise control
applied to train coaches. Control Engineering Practice, 2004, Accepted for
publication.
77. C. D. Bocaniala, J. Sá da Costa and V. Palade, A Novel Fuzzy Classification
Solution for Fault Diagnosis, International Journal of Fuzzy and Intelligent
Systems, Accepted for publication.
78. J. M. F. Calado, J . M. G. Sá da Costa, M. Bartys and J. Korbicz (2004), "FDI
approach to the DAMADICS benchmark problem based on qualitative reasoning
coupled with fuzzy neural networks”, Control Engineering Practice, Accepted for
publication.
79. P. Perez, M. El Hafi, P.J. Coelho e R. Fournier, “Accurate Solutions for Radiative
Heat Transfer in Two-Dimensional Axisymmetric Enclosures with Gas Radiation
and Reflective Surfaces”, Numerical Heat Transfer. Part B: Fundamentals, in press.
14
80. P.J. Coelho, “A Hybrid Finite Volume / Finite Element Discretization Method for
the Solution of the Radiative Heat Transfer Equation”, J. Quantitative Spectroscopy
and Radiative Transfer, in press.
81. Neven Duić, Maria Lerer, Maria Graça Carvalho, Increasing the supply of
renewable energy sources in island energy systems, International Journal of
Sustainable Energy, 23-4, 177–186 (2003)
82. N. Duic, M.G. Carvalho, Increasing renewable energy sources in island energy
supply: case study Porto Santo, Renewable and Sustainable Energy Reviews 8-4,
383-399 (2004)
83. T.R.C. Fernandes, Fengzhen Chen and Maria da Graça Carvalho “HySociety” in
support of European hydrogen projects and EC policy. . International Journal of
Hydrogen Energy. (in press)
84. Afgan, N., Carvalho M.G., Pristic, S. and Bar-Cohen, A. - “Sustainability
Assessment of Aluminium Heat Sink Design”. Accepted for publication in
International Journal on Heat Transfer Engineering.
85. Pitarma, R. A., Ramos, J. E., Ferreira, M. E. and Carvalho, M.G. – “Computational
Fluid Dynamics- An Advanced Active Tool in Environmental Management and
Education”. Presented at the First World Environmental Education Congress,
Espinho, Portugal, 20-24 May 2003. Management of Environmental Quality, an
International Journal, Vol. 15, No. 2, 2004, pp. 102-110.
86. T.R.C. Fernandes, Fengzhen Chen, Maria da Graca Carvalho. “HySociety” in
support of European hydrogen projects and EC policy. International Journal of
Hydrogen Energy, Article in press (corrected proof).
87. Fengzhen Chen, Shaowu Zha, Jian Dong, Meilin Liu. Pre-reforming of propane for
low-temperature SOFCs. Solid State Ionics, 166 (2004) 269–273.
88. Teixeira, M. A. Asia-Europe Relations - UNIPASUD, a Report on an Ongoing
Project. In: Energy & Sustainable Development Magazine. Éditions de l’électricité
et du développement durable: Paris., Nu 4, Jun – Ago, pg. 12, 2004.
89. Teixeira, M. A. Relations Asie Europe – UNIPASUD, rapport sur un projet en
cours. In: Énergie & Développement Durable Magazine. Éditions de l’électricité et
du développement durable: Paris., Nu 4, Jun – Ago, pg. 12, 2004.
90. Silva, C. M., Santos, H. Farias, T. L and Costa, M. “Evaluation of SI Engine
Exhaust Gas Emissions Upstream and Downstream of the Catalytic Converter
submitted for publication; Energy Conversion and Management; Julho de 2004
91. Brasil, A. M., Farias, T. L. and Carvalho, M. G. (2004) “Morphology of fractal-like
aggregates undergoing restructuring”, submitted for publication Clean Air - Journal.
92. M. C. Coelho, T. L. Farias & N. M. Rouphail , “A Methodology for Modelling and
Measuring Traffic and Emission Performance of Speed Control Traffic Signals”; in
press, Journal of Atmospheric Environment.
93. Ambrósio, Jorge, Contact and Impact Models for Vehicle Crashworthiness
Simulation, In International Journal of Crashworthiness, 8(1), 73-86, 2003
15
94. Ambrósio, Jorge,, Efficient Kinematic Joints Descriptions For Flexible Multibody
Systems Experiencing Linear And Non-linear Deformations, International Journal
of Numerical Methods in Engineering, 56, 1771-1793, 2003.
95. Correia, I. F. Pinto, Mota Soares, C. M., Mota Soares C. A., Herskovits J. “Analysis
of Laminated Conical Shell Structures using High Order Models”, Composite
Structures, Elsevier Ltd., UK, Vol. 62, pp 385-392, 2003.
96. Correia, V. M. Franco, Mota Soares, C. M., Mota Soares, C. A., “Buckling
Optimization of Composite Laminated Adaptative Structures”, Composite
Structures, Elsevier Ltd., UK, Vol. 62 , pp 317-323, 2003.
97. Dias, J. P. And Pereira, M. S. “Optimization Methods for Carshwortiness Design
using Multibody Models”, Computers & Structures, 2004 Aceite para publicação,
2003.
98. Guedes, J. M., Rodrigues, H. and Bendsøe M. P., "A Material Optimization Model
to Approximate Energy Bounds for Cellular Materials Under Multiple Load
Conditions" Structural Optimization, 25, 446-452, 2003.
99. Madeira, J. F. Aguilar, Rodrigues, H. and Pina, Heitor, “Genetic methods in multiobjective optimization of structures with an equality constraint on volume”, Lecture
Notes in Computer Science , 2632: 767-781, 2003.
100. Milho, João, Ambrósio, Jorge and Pereira, Manuel Seabra, Validated Multibody
Model for Train Crash Analysis, International Journal of Crashworthiness, 8(4),
339-352, 2003.
101. Neto, Maria Augusta and Ambrósio, Jorge, Stabilization Methods For The
Integration of Differential-Algebraic Equations In The Presence of Redundant
Constraints, Multibody Systems Dynamics, 10(1), 81-105, 2003.
102. Pedro, G., Suleman, A. and Djilali, N., “A Numerical Study of the Propulsion
Efficiency of a Flapping Hydrofoil,” submitted to International Journal of
Numerical Methods in Fluids, Vol. 42, pp. 493-526, 2003.
103. Pombo, João e Ambrósio, Jorge, General Spatial Curve Joint for Rail Guided
Vehicles Kinematics and Dynamics, Multibody Systems Dynamics,9(3), 237-264,
2003.
104. Santos, J. V. Araújo, Mota Soares, C. M., Mota Soares, C. A. & Maia N. M. M.,
“Influence of Model Incompleteness and Erros in Structural Damage
Identification”, Composite Structures, Elsevier Ltd., UK, Vol. 62, pp 305-315,
2003.
105. Silva, Miguel e Ambrósio, Jorge, Solution of the Redundant Muscle Forces in
Human Locomotion With Multibody Dynamics and Optimization Tools, Mechanics
Based Design of Structures and Mechanisms, 31(3), 381-411, 2003.
106. Silva, Miguel e Ambrósio, Jorge, Sensitivity of the Results Produced by the Inverse
Dynamic Analysis of a Human Stride to Perturbed Input Data, Gait and Posture,
19(1), 35-49, 2003.
16
107. Suleman A., and Sedaghati, R., “The Force Method Revisited,” AIAA Journal, Vol.
40, No. 4, April, 2003.
108. Suleman, A., Burns, S. and Waechter, D., “Design of an Electrostrictive Inchworm
Actuator,” submitted to Journal of Mechatronics, Vol. 14, pp. 567-586; 2004;
online: doi:10.1016/j.mechatronics.2003.10.007, July, 2003.
109. C.C. Ferreira, M.H.F. Melão Barros and A.F.M. Barros. “Optimal Design of
Reinforced Concrete T-sections in Bending”. Engineering Structures, Vol 25
(2003), 951-964.
110. M.H.F. Melão Barros, C.C. Ferreira and A.F.M. Barros. “Integração do Diagrama
de Tensões de Compressão no Betão em Flexão Desviada Usando a Equação do
MC90”. Construlink ( www.construlink.com), Vol 1 Nº3, (2003), 41-49.
111. Sampaio, R. P. C., Maia, N. M. M., Silva, J. M. M., Almas, E. A. M., "Damage
Detection in Structures: From mode shape to frequency response function
methods", Mechanical Systems and Signal Processing (2003), 17(3), 489-498, May
2003
112. Santos, J. V. A., Soares, C. M., M., Soares, C. ª M., Maia, N. M. M., "Structural
Damage Identification: Influence of Model Incompleteness and Errors"
Composite Structures, Vol. 62, No. 3-4, pp. 303-313, 2003.
113. Almas, E: A. M., Silva, F. A. P., “Finite Difference Automatically Generated NonUniform Grids in the Numerical Solution of the Reynolds Compressible Onedimensional Squeeze-Film Equation”, Journal of Engineering Tribology, Vol. 217,
no. 3, June 2003, pp. 243-249.
114. L. Bandeira, J. M. Sousa and U. Kaymak. Fuzzy clustering in classification using
weighted features. In Taner Bilgiç, Bernard De Baets and Okyay Kaynak, editors,
Lecture Notes on Artificial Intelligence 2715, Fuzzy Sets and Systems, IFSA’2003,
115. Proceedings of the 10th World Congress of International Fuzzy Systems
Association, pp. 560-567, Istanbul, Turkey, 2003.
116. L.Campos and J. Azinheira, "On the Application of Special Functions to NonLinear and Unsteady Stability: (Part II) Solution in Terms of Bessel and
Hypergeometric Funtions", J.Integral Transforms and Special Functions, Vol 14
(2), pp 167-180, 2003.
117. A.Elfes, Samuel Siqueira Bueno, Marcel Bergerman, Ely C. de Paiva, Josué Jr.
Guimarães Ramos, José R. Azinheira, “Robotic Airships for Exploration of
Planetary Bodies with an Atmosphere: Autonomy Challenges”. Autonomous
Robots, Vol 14 (2-3), pp 147-164, 2003
118. U. Kaymak and J. M. Sousa. Weighted constraint aggregation in fuzzy
optimization. In Constraints, 8(1): 61-78, 2003.
119. J. M. Martins, Z. Mohamed, M. O. Tokhi, J. Sá da Costa, M. A. Botto, “Approaches
for dynamic modelling of flexible manipulator systems”, IEE Proceedings - Control
Theory and Applications, Vol. 150, No 4, pp. 401-411, 2003.
17
120. J. C. Pinto, P. Vieira and J. M. Sousa. A new graph-like classification method
applied to ancient hand-written musical symbols. In International Journal on
Document Analysis and Recognition, 6(1): 10-22, 2003.
121. J. C. Pinto, J. M. Sousa and H. Alexandre. New distance measures applied to
marble classification. In Alberto Sanfeliu and José Ruiz-Shulcloper, editors,
Lecture Notes on Computer Science 2905, Progress in Pattern Recognition, Speech
and Image Analysis, CIARP’2003, Proc. of 8th Iberoamerican Congress on Pattern
Recognition, pp. 383-390, Havana, Cuba, 2003.
122. J. C. Pinto, Pedro Vieira, João M. Sousa, A new Graph-like Classification Method
Applied to Ancient Handwritten Musical Symbols, International Journal on
Document Analysis and Recognition, Vol. 6, Number 1, 2003.
123. J. C. Pinto, João M. Sousa, H. Alexandre, “New Distance Measures Applied to
Marble Classification” , Progress in Pattern Recognition, Speech and Image
Analysis – Proccedings 8th Iberoamerican Congress on Pattern Recognition,
CIARP 2003, Havana, Cuba, November 2003, Lectures Notes in Computer Science,
Springer, pp 384-390, 2003.
124. C. A. Silva, T.A. Runkler, J. M. Sousa and J. Sá da Costa. Optimization of logistic
processes in supply-chains using meta-heuristics. In Fernando Moura Pires and
Salvador Abreu, editors, Lecture Notes on Artificial Intelligence 2902, Progress in
Artificial Intelligence, 11th Portuguese Conference on Artificial Intelligence, pp. 923, Beja, Portugal, 2003.
125. J. M. Sousa, C. Silva and J.M.G. Sá da Costa. Fuzzy active noise modeling and
control. In International Journal of Approximate Reasoning, 33:51-70, 2003.
126. J. M. Sousa, R. Palm, C. Silva and T. A. Runkler. Optimizing logistic processes
using a fuzzy decision making approach. In IEEE Transactions on Systems, Man,
and Cybernetics Part A: Systems and Humans, 33(2): 245-256, 2003.
127. T. J.J. van den Boom, Miguel Ayala Botto, José Sá da Costa, “Robust control of
dynamical systems using neural networks with input-output feedback linearization”,
International Journal of Control, Vol. 76, No 18, pp.1783-1789, 2003.
128. Pinto H. S. and Martins J. P., “Ontologies: How Can They Be Built?”, Knowledge
and Information Systems, an International Journal (KAIS), accepted for publication,
2003.
129. Landre J., Pertence A., Cetlin P. R., Rodrigues J. M. C. and Martins P. A. F., “On
the Utilisation of Ductile Fracture Criteria in Cold Forging”, Finite Elements in
Analysis and Design, Vol. 39, 175-186, 2003.
130. Xiong S., Rodrigues J. M. C. and Martins P. A. F., “Three Dimensional Modelling
of the Vertical-Horizontal Rolling Process”, Finite Elements in Analysis and
Design, Vol. 39, 1023-1037, 2003.
131. Xiong S., Liu W. K., Cao J., Rodrigues J. M. C. and Martins P. A. F., “On the
Utilization of the Reproducing Kernel Particle Method for the Numerical
Simulation of Plane Strain Rolling”, International Journal of Machine Tools &
Manufacture, Vol. 43, 89-102, 2003.
18
132. Alves M. L., Fernandes J. L. M., Rodrigues J. M. C. e Martins P. A. F., “Finite
Element Remeshing in Metal Forming Using Hexahedral Elements”, Journal of
Materials Processing Technology, Vol. 141, 395-403, 2003.
133. Xiong S., Rodrigues J. M. C. and Martins P. A. F., “Numerical Simulation of
Three-Dimensional Steady-State Rolling by the Reproducing Kernel Particle
Method”, Engineering Computations, Vol. 20, 855-874, 2003.
134. Rosa P. A. R., Rodrigues J. M. C. and Martins P. A. F., “External Inversion of
Thin-Walled Tubes Using a Die: Experimental and Theoretical Investigation”,
International Journal of Machine Tools & Manufacture, Vol. 43, 787-796, 2003.
135. Xiong S., Rodrigues J. M. C. and Martins P. A. F., “Three-Dimensional Modelling
of Steady-State Rolling by the Reproducing Kernel Particle Method”, International
Journal of Forming Processes, Vol. 6, 179-200, 2003.
136. Alves M. L., Rodrigues J. M. C. and Martins P. A. F., “Simulation of ThreeDimensional Bulk Forming Processes by the Finite Element Flow Formulation”,
Modelling and Simulation in Materials Science and Engineering – Institute of
Physics, Vol. 11, 803-821, 2003.
137. J. F. Antunes Simões, E. Matos da Rocha, R.M. Oliveira Baptista, “Optimização de
um Processo de Roscagem em Aços Temperados Através da Tecnologia CNC”,
Revista TECNOMETAL, n. 144, 15-18, 2003.
138. A.Costa, L. Quintino, M. Greitmann, “Laser Beam Welding Hard Metals to Steel",
Journal of Materials Processing Technology, n. 141, 163-173, 2003.
139. M.B.G Castro, J.F. dos Santos, M.L. Quintino, “Plasma Arc Welding of the
Superalloys Inconel 625 and 718: Parameter Areas and Mechanical Properties",
International Journal for the Joining of Materials, Vol. 15, n.1/2, 2003.
140. Pires, L. Quintino, J.F. Durodola, A. Beevers, “Performance of Bi-adhesive Bonded
Aluminium Lap Joints", International Journal of Adhesion and Adhesives, Vol. 23,
215-223, 2003.
141. Gonçalves V., Napoleão P., Vidal S., "Resistance Spot Welding of Zinc Coated
Steel, International Journal of Joining of Materials, Vol. 15, 16-21, 2003.
142. Gonçalves V., Napoleão P., "Zinc Coated Steel Resistance Spot Welding -Part1:
Lobe Curve”, SUDURA ASR, n. 4, 9-13., 2003
143. Gonçalves V., Salema A.,"LASER / TIG Hybrid Welding - Program for the
Calculation of Welding Parameters and Pre-heating Temperature in Alloy Steels”,
SUDURA
ASR,
n.2,
7-12, 2003.
144. Ferreira, J.C., Mateus, A., “Studies of Rapid Soft Tooling with Conformal Cooling
Channels for Plastic Injection Moulding”, Journal of Materials Processing
Technology, Vol.142/2, 508-616, 2003.
145. Pedro Cunha, Elsa Henriques and José Dionísio, “An Architecture to Support the
Manufacturing Design and Planning”, International Journal on Computer Integrated
Manufacturing, Vol. 16, Number 7-8, 605-612, 2003.
19
146. Paulo Peças and Elsa Henriques, ”Influence of Silicon Powder Mixed Dielectric on
Conventional Electrical Discharge Machining”, International Journal of Machine
Tools and Manufacture, Vol. 43, 1465-1471, 2003.
147. A.F. de O. Falcão, L.C. Vieira, P.A.P. Justino, J.M.C.S. André, “By-pass air-valve
control of an OWC wave power plant”, ASME Journal of Offshore Mechanics and
Arctic Engineering, Vol. 125, pp. 205-210, 2003.
148. A.F. de O. Falcão, "First generation wave power plants: current status and R&D
requirements". Submitted on 19th August 2003 to ASME Journal of Offshore
Mechanics and Arctic Engineering. Final manuscript approved on 14th November
2003.
149. J.C.C. Henriques, L.M.C. Gato, “A multi-dimensional upwind matrix distribution
scheme for conservative laws”, Submitted to Computers and Fluids. Accepted in
final form on 15th May 2003.
150. A.F. de O. Falcão, "Stochastic modelling in wave power-equipment optimization:
maximum energy production versus maximum profit". Submitted on 30th
September 2003 to Ocean Engineering. Received on 12th October 2003. Accepted
without modifications on 4th February 2004.
151. J. C. Páscoa, A.C. Mendes, L.M.C. Gato, R. Elder, “Aerodynamic design of
turbomachinery cascades using an enhanced time-marching finite volume method”.
Accepted (27 October 2003) for publication with minor revisions in Computer
Modeling in Engineering and Sciences, manuscript ID2003/100, 2003.
152. Terra G. and Kobayashi M. H. (2003), On classical mechanical systems with nonlinear constraints, J. Geom Phys (3-4), pp 385-417
153. Ramirez L.E.S., Lim E.A., Coimbra C.F.M., Kobayashi M. H, (2003). On the
dynamics of a spherical scaffold in rotating bioreactors, Biotechnology and
Bioengineering, 84(3): pp 382- 389
154. P.J. Coelho, O.J. Teerling and D. Roekaerts, “Spectral Radiative Effects and
Turbulence/Radiation Interaction in a Non-Luminous Turbulent Jet Diffusion
Flame”, Combustion and Flame, Vol. 133, Nº 1-2, pp. 75-91 (2003).
155. P.J. Coelho, P. Perez and M. El Hafi, “Benchmark Numerical Solutions for
Radiative Heat Transfer in Two-Dimensional Axisymmetric Enclosures with NonGray Sooting Media”, Numerical Heat Transfer. Part B: Fundamentals, Vol. 43, Nº
5, pp. 425-444 (2003).
156. D. Schwer, P. Lu, W. Green e V. Semião. A consistent-splitting approach to
computing stiff steady-state reacting flows with adaptive chemistry, Combustion
Theory and Modelling, Vol. 7, pp. 383-399, 2003.
157. V. Geraldes, V. Semião e M.N. Pinho. Hydrodynamics and concentration
polarization in NF/RO spiral-wound modules with ladder-type spacers,
Desalination, Vol. 157 (No. 1-3), pp 395-402, 2003.
20
158. P.Lu e V. Semião. A new second-moment closure approach for turbulent swirling
confined flows, International Journal of Numerical Methods in Fluids, Vol. 41 (No.
2), pp 133-150, 2003.
159. Costa, M., Silva, P. and Azevedo, J. L. T. (2003). Measurements of gas species,
temperature, and char burnout in a low-NOx pulverized-coal-fired utility boiler.
Combustion Science and Technology, 175, 271-289.
160. Casaca, C. and Costa, M. (2003). Co-combustion of biomass in a natural gas fired
furnace. Combustion Science and Technology, 175, 1953-1977.
161. Neven Duic, Luis Manuel Alves, Fengzhen Chen, Maria Graça Carvalho, “Potential
of Kyoto Protocol Clean Development Mechanism in transfer of clean energy
technologies to Small Island Developing States: case study of Cape Verde”,
Renewable and Sustainable Energy Reviews. 7, 83-98 (2003).
162. Naim Afgan, Zeljko Bogdan, Neven Duic, Guest Editorial to the Special Issue of
Management of Environmental Quality: Sustainable Development of Energy, Water
and Environment Systems, Management of Environmental Quality: An
International Journal. 14-4, 443-443 (2003).
163. Margarida C. Coelho, Tiago L. Farias e Nagui M. Rouphail, A Methodology for
Modelling and Measuring Traffic and Emission Performance of Speed Control
Traffic Signals, Atmospheric Environment (Elsevier), submetida em Outubro de
2003, in press (Outubro de 2003), 20 pág.
164. Carvalho, M. G., Kayakol, N.; Nogueira M. “Computational intelligence
technologies in the design of hierarchical control architecture of glass melting
furnaces”, Glass Technology, Volume 44, Number 1, Page 25 – 29, 2003
165. A.postol, V., Santos, J.L.T.,and Paiva, M. “ Sensitivity Analysis and Optimization
of Truss/Beam Components of Arbitrary Cross Section. Part II: Shear Stresses, “
Computers & Structures, Vol.80, pp.391-401,2002.
166. Araújo A.L., Soares, C. M. Mota, Herskovits, J., Pedersen, P., “Development of a
Finite Element Model for the Identification of Material and Piezoelectric Properties
Through Gradient Optimisation and Experimental Vibration Data”, Composite
Structures, Vol. 58, pp 307-318, 2002.
167. Correia, I.F. Pinto, Soares, Cristóvão M. Mota, Soares, Carlos. A. Mota,
Herskovits, J.,“Active Control of Axisymmetric Shells with Piezoelectric Layers: a
Mixed Laminated Theory with a High Order Displacement Field”, Computers &
Structures, Vol. 80, pp. 2265-2275, 2002.
168. Dias, J. P. and Pereira, M. S., ”Optimal Design of Train Structures for
Crashworthiness using a Multi-load Approach”, I. J. of Crashworthiness, Vol. 7, N.
3, pp. 331-343, 2002.
169. Dimitrovová, Z., Advani, S.G., “Analysis and Characterization of Relative
Permeability and Capillary Pressure for Free Surface Flow of a Viscous Fluid
across an Array of Aligned Cylindrical Fibers”, Journal of Colloid and Interface
Science, 245, 325-337, (2002).
21
170. Fernandes, P. R., Folgado, J., Jacobs, C., and Pellegrini, V., “A contact model with
ingrowth control for bone remodelling around cementless stems”, Journal of
Biomechanics, 35, no. 2, pp. 167-176, 2002.
171. Gonçalves, J., Ambrósio, J. Advanced Modeling of Flexible Multibody Dynamics
Using Virtual Bodies, Computer Assisted Mechanics and Engineering Sciences, 9
(3), 373-390, 2002.
172. Graça, Mário M. (2002), Accelaration of nonhyperbolic sequences of Mann,
International Journal of Mathematics and Mathematical Sciences, IJMMS 32:9,
565-572.
173. Graça, Mário M. (2002), On the computation of nonhyperbolic fixed points,
Experimental Mathematics, 11, No.4, 477-485.
174. Lage, R. M. Garcia, Soares, C. M. Mota, Soares, C. A. Mota, Herskovits, J.,
“Development of a Single-layer Laminated Plate Finite Element Model Based on
Walsh Series”, Mechanics of Advanced Materials and Structures, Vol. 9(3), pp.
241-255, 2002.
175. Loja, M. A. Ramos, Soares, C. M. Mota, Soares, C. A. Mota, “Modelling and
Design of Adaptive Structures using B-Spline Strip Models”, Composite Structures,
Vol. 57, pp. 245-251, 2002.
176. Milho, J., Ambrósio, J., Pereira, M.S., A Multibody Methodology for the Design of
Anti-Climber Devices for Train Crashworthiness Simulation, International Journal
of Crashworthiness, 7(1), 7-20, 2002.
177. Moita, José M. Simões, Soares Cristóvão M. Mota, Soares, Carlos A. Mota,
“Geometrically Non-linear Analysis of Composite Structures with Integrated
Piezoelectric Sensors and Actuators”, Composite Structures, Vol. 57, pp 253261,2002.
178. Moreira, M., Antunes, J.V. and Pina, H., A Symbolic-Numerical Method for
Nonlinear Rotor Dynamics under Fluid Confinement, Int. J. of Nonlinear Sciences
and Numerical Simulation, 3, 35-44, 2002.
179. Neves, M.M.; Sigmund, O.; Bendsøe, M.P.: “Topology Optimization of Periodic
Microstructures with a Penalization of Highly Localized Buckling Modes”, Int. J.
Numer. Meth. Engng., 54, 809-834, 2002.
180. Rodrigues, H., Guedes, J. M. and Bendsoe, M. P., "Hierarchical optimization of
material and structure", Structural and Multidisciplinary Optimization, 24 (1): 1-10
2002.
181. Sedaghati, R., B. Tabarrok and Suleman, A., “Structural Optimization and Design
of Structures with Frequency Constraints Using the Finite Element Method,” AIAA
Journal, Vol. 40, No. 2, pp. 382–388, 2002.
182. Silva, M. and Ambrósio, J., Kinematic Data Consistency in the Inverse Dynamic
Analysis of Biomechanical Systems, Multibody System Dynamics, 8, 219-239,
2002.
22
183. Suleman, A., “On the Use of System Modes to Model Multibody Flexible
Structures,” Acta Astronautica, Vol. 50, No. 11, pp. 653-664, 2002.
184. Suleman, A., and Gomes, M.A., “An Analytical Model for a Composite Adaptive
Rectangular Structure Using the Heaviside Function,” Mechanics of Advanced
Materials and Structures, Vol. 9, pp. 309-334, 2002.
185. Suleman, A., Crawford, C., and Costa, P., “Experimental Aeroelastic Response of
Piezoelectric and Aileron Controlled 3-D Wing,” Journal of Intelligent Materials
Systems and Structures, Vol 13, Issue 02/03, February 2002.
186. Ambrósio, J., Efficient Kinematic Joints Descriptions For Flexible Multibody
Systems Experiencing Linear And Nonlinear Deformations, International Journal of
Numerical Methods in Engineering, (accepted for publication 2002).
187. Guedes, J. M. , Rodrigues, H., and Bendsoe, M. P., "A Material Optimization
Model to Approximate Energy Bounds for Cellular Materials Under Multiple Load
Conditions", DCAMM Report 677, Techical Un. fo Denmark & Aalborg
University, 2002 (Accepted, Structural and Multdisciplinary Optimization).
188. Madeira, J. F. Aguilar, Rodrigues, H., and Pina, H. “Multi-Objective Optimization
of Structures Topology by Genetic Algorithms”, Computer & Structures (Accepted,
Computer & structures).
189. Milho, João, Ambrósio J. and Pereira, M. S., Validated Multibody Model for Train
Crash Analysis, In International Journal of Crashworthiness, (accepted for
publication 2002)
190. Neto, Maria Augusta and Ambrósio, J., Stabilization Methods For The Integration
of Differential-Algebraic Equations In The Presence of Redundant Constraints,
Multibody Systems Dynamics, (accepted for publication 2002).
191. Pedro, G., Suleman, A., and N. Djilali, “A Numerical Study of the Propulsion
Efficiency of a Flapping Hydrofoil,” submitted to International Journal of
Numerical Methods in Fluids, in press, 2003.
192. Pereira, M. S., Dias, J. P., “Analysis and Design for Train Crashworthiness Using
Multibody Models”, Special Issue of Vehicle System Dynamics, (Accepted for
publication 2002)
193. Pombo, J. and Ambrósio, J., General Spatial Curve Joint for Rail Guided Vehicles
Kinematics and Dynamics, Multibody Systems Dynamics, (accepted for publication
2002).
194. Silva, Miguel and Ambrósio, J., Solution of the Redundant Muscle Forces in
Human Locomotion With Multibody Dynamics and Optimization Tools, Mechanics
of Structures and Mechanisms, (accepted for publication 2002).
195. Suleman A., “Nonlinear Multibody Dynamics and Control of Flexible Space
Structures”, submitted to the Journal of Vibration and Control, in press, 2002
196. Suleman A., “Nonlinear Multibody Dynamics and Control of Flexible Space
Structures”, submitted to the Journal of Vibration and Control, in press, 2002.
23
197. Suleman A., and Sedaghati, R. “The Force Method Revisited,” AIAA Journal,
(accepted for publications)
198. Sampaio, R. P. C., Maia, N. M. M., Silva, J. M. M., Almas, E. M., "Damage
Detection in Structures: From Mode Shape to Frequency Response Function
Methods" – Accepted to be published in Mechanical Systems and Signal
Processing.
199. Almas, E. M., Silva, F. A. P. "Finite Difference Autommatically Generated
Nonuniform Grids in the Numerical Solution of the Reynold’s Compressible
Onedimensional Squeeze-film Equation" – Accepted to be published in Journal of
Engineering Tribology, Proc. Of the Institute of Mech. Engineers, Part J.
200. J. Azinheira, E. de Paiva, S. Bueno, "Influence of Wind Speed on Airship
Dynamics", JGCD, Vol 25, No 6, Nov 2002, pp 1116-1124
201. J. Martins, Miguel Ayala Botto, José Sá da Costa, “Modeling of flexible beams for
robotic manipulators'', Multibody System Dynamics, Vol. 7, 79-100, 2002.
202. M. Kowal, J. Korbicz, M. J. G. C. Mendes, J. Calado, „ Fault detection using neurofuzzy networks“, System Science Journal, vol. 28, n. 1, 45-57, 2002.
203. Rodrigues J. M. C. And Martins P. A. F., “Finite Element Modelling of the Initial
Stages of a Hot Forging Cycle”, Finite Elements in Analysis and Design, Vol. 38,
295-305, 2002.
204. Xiong S., Rodrigues J. M. C. And Martins P. A. F., “Rigid Plastic Boundary
Element Analysis of the Upsetting of Slabs”, Journal of Engineering Analysis with
Boundary Elements, Vol. 26, 367-374, 2002.
205. José M. G. Carvalho Ferreira, A Study of Cast Chilled Iron Processing
Technology and Wear Evaluation of Harden Gray Iron for Automotive,
Journal of Materials Processing Technology, Vol. 121/1, 94-101, 2002.
206. A.F. de O. Falcão, “Wave power absorption by a periodic linear array of oscillating
water columns”, Ocean Engineering, Vol. 29, p. 1163-1186, 2002.
207. A.Brito-Melo, L.M.C. Gato, A.J.N.A. Sarmento, “Analysis of Wells Turbine
Design Parameters by Numerical Simulation of the OWC Performance”, Ocean
Engineering, Vol. 29, p. 1463-1477, 2002.
208. A.F. de O. Falcão, R.J.A. Rodrigues, “Stochastic modelling of OWC wave power
performance”, Applied Ocean Research, Vol. 24, pp. 59-71, 2002.
209. A.F. de O. Falcão, “Control of an oscillating water column wave power plant for
maximum energy production”, Applied Ocean Research, Vol. 24, pp. 73-82, 2002.
210. A.Clément, P. McCullen, A.F. de O. Falcão, A. Fiorentino, F. Gardner, K.
Hammarlund, G. Lemonis, T. Lewis, K. Nielsen, S. Petroncini, M.T. Pontes, P.
Schild, B.O. Sjöström, H.C. Sorensen, T. Thorpe, “Wave energy in Europe: current
statues and perspectives”. Renewable and Sustainable Energy Reviews, Vol. 6, pp.
405-431, 2002.
24
211. J.C.C. Henriques, L.M.C. Gato, “Use of a residual distribution Euler solver to study
the occurrence of transonic flow in Wells turbine rotor blades”, Computational
Mechanics, Vol. 29, pp. 244-253, 2002.
control of an OWC wave power plant”, accepted for publication in final form in
ASME Journal of Offshore Mechanics and Arctic Engineering, 2002.
213. Sousa, J.M.M. (2002) Turbulent Flow Around a Surface-Mounted Obstacle Using
2D-3C DPIV, Experiments in Fluids, Vol. 33, pp. 854-862
214. Barreiros, A.: “Heat and Mass Transfer in Turbulent Non-Premixed Flames”,
Trends in Heat, Mass & Momentum Transfer, Vol. 8, pp 1-24, 2002.
215. Durão, D., Maltez, L., Sarmento, M. and Varela, V., (2002), “Management of
Virtual and Real Science and Technology Parks”, presented for publication to
Technovation – The International Journal of Technological Innovation,
enterpreneurship and Technology Management.
216. Geraldes, V. Semião e M.N. Pinho, “The effect of ladder-type spacers configuration
in NF spiral-wound modules on the concentration boundary layers disruption”,
Desalination, 2002, Vol. 145 (No. 1-3), pp187-194.
217. J. Lopes, V. Semião e M.G. Carvalho, “On the effect of the local turbulence scales
on the mixing rate of diffusion flames: assessment of two different combustion
models”, International Journal of Energy Research, 2002, Vol. 26 (No. 10), pp. 893920.
218. J. Ströhle e P.J. Coelho, “On the Application of the Exponential Wide Band Model
to the Calculation of Radiative Heat Transfer in One- and Two-Dimensional
Enclosures”, Int. J. Heat and Mass Transfer, Vol. 45, Nº 10, pp. 2129-2139 (2002).
219. Naim H. Afgan, Maria Graca Carvalho, “Multi-criteria Assessment of New and
Renewable Energy Power Plants”, International Journal ENERGY, Vol.27, No.8,
pp.739-755
220. Naim H. Afgan, Maria Graca Carvalho, Nikolai Hovanov , “Multi-criteria
Sustainability Assessment of Clean Air Technologies”, Transaction of FAMENA,
Zagreb 2002, Vol.26,No.1, pp.1-15
221. P.J. Coelho, “Bounded Skew High Order Resolution Schemes for the Discrete
Ordinates Method”, J. Computational Physics, Vol. 175, pp. 412-437 (2002).
222. P.J. Coelho, “The Role of Ray Effects and False Scattering on the Accuracy of the
Standard and Modified Discrete Ordinates Methods”, J. Quantitative Spectroscopy
and Radiative Transfer, Vol. 73, Nº 2-5, pp. 231-238 (2002).
223. P.J. Coelho, “Numerical Simulation of Radiative Heat Transfer from Non-Gray
Gases in Three-Dimensional Enclosures”, J. Quantitative Spectroscopy and
Radiative Transfer, Vol. 74, Nº 3, pp. 307-328 (2002).
224. Rebola, A. and Costa, M. Simultaneous reduction of NOx and particulate emissions
from heavy fuel oil-fired furnaces. Proceedings of the 29th International
Symposium on Combustion, in press. (2002).
25
225. V. Eymet, A.M. Brasil, M. El Hafi, T.L. Farias e P.J. Coelho, “Numerical
Investigation of the Effect of Soot Aggregation on the Radiative Properties in the
Infrared Region and Radiative Heat Transfer”, J. Quantitative Spectroscopy and
Radiative Transfer, Vol. 74, Nº 6, pp. 697-718 (2002).
226. V. Geraldes V. Semião e M.N. Pinho, “Integrated modeling of transport processes
in fluid/nanofiltration membrane systems”, Journal of Membrane Science, 2002,
Vol. 206 (No.1-2), pp. 189-200.
227. V. Geraldes V. Semião e M.N. Pinho, “Flow management in nanofiltration spiral
wound modules with ladder-type spacers”, Journal of Membrane Science, 2002,
Vol. 203 (No.1-2), pp. 87-102.
228. V. Geraldes, V. Semião e M.N. Pinho, “The effect on mass transfer of momentum
and concentration boundary layers at the entrance region of a slit with a
nanofiltration membrane wall”, Chemical Engineering Science, 2002, Vol. 57 (No.
5), pp. 735-748.
229. Ambrósio J, Lopes G, Costa J, Abrantes J, “Spatial Reconstruction of the Human
Motion Based on Images from a Single Stationary Camera”, Journal of
Biomechanics, 34, 1217-1221, 2001.
230. Ambrósio J, Abrantes J, Lopes G, “Human Motion Spatial Reconstruction By
Means Of A Single Camera”, Human Movement Science, 20(6), 829-851, 2001.
231. Ambrósio J, Gonçalves J, “Complex Flexible Multibody Systems with Application
to Vehicle Dynamics”, Multibody System Dynamics, 6(2), 163-182, 2001.
232. Ambrósio J, Gonçalves J, “Vehicle Crashworthiness Design and Analysis by Means
of Nonlinear Flexible Multibody Dynamics”, Int. J. of Vehicle Design, 26(4), 309330, 2001.
233. Ambrósio J, “Rigid and Flexible Multibody Dynamics Tools for the Simulation of
Systems Subjected to Contact and Impact Conditions”, European Journal of Solids
A/Solids, 19, S23-S44, 2000.
234. Ambrósio J, “Vehicle Structural Impact and Occupant Biomechanics in a
Multibody Integrated Environment”, Int J of Crashworthiness, 4(1), 39-57, 1999.
235. Araújo A, Soares C M, Freitas M, Pedersen P & Herskovits J, “Combined
Numerical-experimental Model for the Identification of Mechanical Properties of
Laminated Structures”, Composite Structures, 50, 363-372, 2000.
236. Barros A M Design and Control Sensitivity Analysis of Multiple Hyperelastic Body
Systems, Eng Opt, 33, 571-599, 2001
237. Correia I, Barbosa J, Soares C M & Soares C A, “A finite element semi-analytical
model for laminated axisymmetric shells: Statics, dynamics and buckling”,
Computers & Structures, 76, 299-317, 2000.
238. Correia I, Soares C M, Soares C A & Herskovits J, “Development of Semianalytical
Shell Models with Embedded Sensors and Actuators”, Composite Structures, 47,
531-541, 1999.
26
239. Correia V, Gomes M, Suleman A, Soares C M, Soares C A, “Modelling and Design
of Adaptive Composite Structures”, Computer Methods in Applied Mechanics and
Engineering, 185, 325-346, 2000.
240. Correia V, Soares C M and Soares C A, “Refined Models for the Optimal Design of
Adaptive Structures using Simulated Annealing”, Composite Structures, 54, 161167, 2001.
241. Dias J and Pereira M, “Optimal Design Of Rigid-Flexible Multibody Systems With
Application To Vehicle Technology”, submited to Vehicle System Dynamics, 2000.
242. Dias J and Pereira M, ”Optimal Design of Train Structures for Crashworthiness
using a Multi-load Approach”, submited to I. J. of Crashworthiness, 2000.
243. Dimitrovová Z, “Effective Constitutive Properties of Linear Elastic Cellular Solids
with Randomly Oriented Cells”, ASME Journal of Applied Mechanics, 66, 918925, 1999.
244. Dimitrovová, Z, “Shape Optimization of Elasto-Plastic Bodies”, Applications of
Mathematics, 46, 81-101, 2001.
245. Dimitrovová Z, Advani, S, “Analysis and Characterization of Relative Permeability
and Capillary Pressure for Free Surface Flow of a Viscous Fluid across an Array of
Aligned Cylindrical Fibers”, Journal of Colloid and Interface Science, in press
(2001).
246. Dimitrovová Z, Faria L, “Finite Element Modeling of the Resin Transfer Molding
Process Based on Homogenization Techniques, Computers & Structures, 76, 379397, (2000).
247. Dimitrovová Z, Faria L, “New Methodology to Establish Bounds on Effective
Properties of Cellular Solids”, Mechanics of Composite Materials and Structures, 6,
331-346, (1999).
248. Domingues J, Portela A, Castro P, “Trefftz Boundary Element Method Applied to
Fracture Mechanics”, Engineering Fracture Mechanics, 64, 1, 67-86, (1999).
249. Fernandes P, Folgado J, Jacobs C and Pellegrini V, “A contact model with ingrowth
control for bone remodelling around cementless stems”, Journal of Biomechanics,
35, 2, 167-176, 2002
250. Fernandes P, Folgado J, Jacobs C and Pellegrini V, “Bone Ingrowth on Cementless
Femoral Stems – A comparison Study for Two Stem Geometries”, Journal of
Biomechanics, 34, Supp. 1, Proc. of the Biomechanica IV, S18 , 2001.
251. Fernandes P, Rodrigues H and Jacobs C, “A model of bone adaptation using a
global optimization criterion based on the trajectorial theory of Wolff”, Comp Meth
in Biomechanics and Biomedical Eng, 2, 125-138, 1999.
252. Fernandes P, Guedes J and Rodrigues H, "Topology Optimization of 3D Linear
Elastic Structures ", Computers & Structures, 73, 583-594, 1999.
253. Graca M, “Acceleration of nonhyperbolic sequences of Mann”, Int. J. Math. and
Mathem. Sc., 2002 (in press)
27
254. Graça M, “On the computation of nonhyperbolic fixed points”, Experim. Math.,
11:1, 2002 (in press).
255. Herskovits J, Dias G, Santos G & Soares C M, “Shape Structural Optimization with
an Interior Point Mathematical Programming Algorithm”, Structural and
Multidisciplinary Optimization, 20, 107-115, 2000.
256. Lankarani H, Ahmed S and Pereira M, “Frictional Impact Analysis in Open-Loop
Multibody Mechanical Systems”, Transactions ASME, J. Mechanical Design,
121,No.1, March99pp119-127, 1999.
257. Loja M, Barbosa J, Soares C M, “Static and Dynamic Behaviour of Laminated
Composite Beams”, Int J of Structural Stability and Dynamics, 1(4), 545-560,
2001.
258. Loja M, Soares C M and Soares C A, “Higher Order B-Spline Finite Strip Model
for Laminated Adaptive Structures”, Composite Structures, 52, 419-427, 2001.
259. Loja M, Barbosa J, Soares C M, Soares C A, “Analysis of Piezolaminated Plates by
Spline Finite Strip Method”, Computers & Structures, 79, 2321-2333, 2001.
260. Miranda P, Guedes J; Rodrigues H, Jacobs C, “Optimization models applied to the
study of the bone implant interface stiffness”. Comp Meth Biomechanics and
Biomedical Eng, 2001 (accepted)
261. Moita J, Barbosa J, Soares C M & Soares C A, “Sensitivity analysis and optimal
design of geometrically non-linear laminated plates and shells”, Computers &
Structures, 76, 407-420, 2000.
262. Moita J, Soares C M & Soares C A, “Buckling and dynamic behaviour of laminated
composite structures using a discrete higher-order displacement model”, Computers
and Structures, 73, 407-423, 1999.
263. Moreira M, Antunes J, Pina H, “A Theoretical Model for Nonlinear Orbital Motions
of Rotors under Fluid Confinement”, J. of Fluids and Structures, 14, 635-668, 2000.
264. Neves M, Rodrigues H, Guedes J, “Optimal Design of Periodic Linear elastic
Microstrucutres”, Computers & Structures, 76, 421-429, 2000
265. Neves M, Sigmund O; Bendsøe M, “Topology Optimization of Periodic
Microstructures with a Penalization of Highly Localized Buckling Modes”, 2001
(accepted to IJNME).
266. Pina H, “Numerical Quadrature Over Triangles With Weak Singularities”, Int. J.
Numer. Meth. Engng., 45, 1871-1855, 1999.
267. Portela A, Charafi A, “Trefftz Boundary Element Method: Multi-Region
Formulations”, Int. J Num Meth Eng, 45, 821-840, (1999).
268. Rodrigues H, Soto C and Taylor J, “A model to predict efficient two-component
composite structures”, Structural Optimization, 17, 186-198, 1999.
269. Rodrigues H, Guedes J Bendsøe M, "Hierarchical optimization of material and
structure", Structural Optimization, 2001 (in print)
28
270. Santos J, Soares C M, Soares C A and Pina H, “Development of a Numerical Model
for the Damage Identification of Composite Plate Structures”, Composite
Structures, 48, 59-65, 2000.
271. Santos J, Soares C M, Soares C A, Pina H, “Identification of damage in composite
structures: A numerical model”, Mechanics of Composite Materials and Structures,
6 (4), 363-376, 1999.
272. Santos J, Soares C M, Soares C A, Pina H, “A damage identification numerical
model based on the sensitivity of orthogonal conditions and least squares
techniques”, Computers & Structures, 78, 283-291, 2000.
273. Santos J, Soares C M, Soares C A, Pina H, “Development of a numerical model for
the damage identification on composite plate structures”, Composite Structures,
48, 59-65, 2000.
274. Sedaghati R, Suleman A, Tabarrok B, “Optimum design of adaptive truss structures
using the integrated force method”, Computer Modeling in Engineering and
Sciences Journal, 2, No.2, 2001, 259-271.
275. Sedaghati R, Tabarrok B, Suleman A and Dost S, “Optimization of Adaptive
Structures using the Finite Element Force Method based on Complementary
Energy”, Transactions of the CSME, Vol 24, No. 1B, 2000, 263-271.
276. Sedaghati R, Tabarrok B, Suleman A, “Structural Design Optimization of Nonlinear
Symmetric Structures Using the Group Theoretic Approach”, AIAA Journal, 39,
No. 8, 2001, 1593-1599.
277. Silva M, Ambrósio J, “Pedestrian Impact and Run Over Using a Multibody
Simulation Tool”, International Journal of Crashworthiness, 4(3), 261-271, 1999.
278. Soares C M, Soares C A & Correia V, “Optimal Design of Piezolaminated
Structures”, Composite Structures, 47, 625-634, 1999.
279. Soares C M, Soares C A, Correia V and Loja M, “Higher Order B-Spline Strip
Models for Laminated Composite Structures with Integrated Sensors and
Actuators”, Composite Structures, 54, 267-274, 2001.
280. Suleman A and Gonçalves M, “Multi-objective Optimization of an Adaptive
Composite Beam Using the Physical Programming Approach”, Journal of
Intelligent Materials Systems and Structures, 10, January 1999, 56-70.
281. Suleman A and Modi V, “Dynamics of a Flexible Platform Due to Operational
Disturbances”, Acta Astronautica, 44, No. 1, 1999, 1-9.
282. Suleman A, Costa A and Moniz P, “Buffeting Suppression of a Wing using
Adaptive Shape Control”, Canadian Aeronautics and Space Journal,
46, Nº.2,
June 2000, 94-98.
283. Suleman A, “Adaptive Composites Modelling and Application in Panel Flutter and
Noise Suppression”, Computers and Structures, 76, 2000, 365-378.
29
284. Valente F and Pina H, “Iterative Techniques for 3-D Boundary Element Method
Systems of Equations”, Engineering Analysis with Boundary Elements, 25, 423429, 2001.
285. Sampaio, R.C., Maia, N.M.M., Silva, J.M.M., "Damage Detection Using the
Frequency-Response-Function Curvature Method" - Journal of Sound and Vibration
(1999), 226(5), 1029-1042, October 1999.
286. Ribeiro, A.M.R., Maia, N.M.M., Silva, J.M.M., "On the Generalisation of the
Transmissibility Concept" - Mechanical Systems and Signal Processing (2000),
14(1), 29-35, January 2000.
287. Silva, J.M.M., Maia, N.M.M., Ribeiro, A.M.R., "Cancellation of Mass Loading
Effects of Transducers and Evaluation of Unmeasured FRFs" - Journal of Sound
and Vibration (2000), 236(5), 761-779, October 2000.
288. Maia, N.M.M., Silva, J.M.M., "Modal Analysis Identification Techniques" Philosophical Transactions of the Royal Society of London, A (2001), 359, 29-40,
January 2001.
289. Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., "The Transmissibility Concept in
Multi-Degree-of-Freedom Systems" - Mechanical Systems and Signal Processing
(2001), 15(1), 129-137, January 2001.
290. Silva, J.M.M., Carvalhal, F.G.G., Morais, P.J.G. "A Specialised Element for Finite
Element Model Updating of Moveable Joints" - Multibody System Dynamics, Vol.
5, No. 4, 375-386, May 2001.
291. H.A.B. te Braake, Miguel Ayala Botto, H. J. L. van Can, José Sá da Costa, H.B.
Verbruggen, “Linear predictive control based on approximate input-output feedback
linearisation”, IEE Proceedings - Control Theory and Applications, Vol. 146, No 4,
pp. 295-300, 1999.
292. J. Abonyi, R. Babuska, M. Ayala Botto, F. Szeifert, L. Nagy, “Identification and
control of nonlinear systems using fuzzy Hammerstein models”. Industrial &
Engineering Chemistry Research, Vol. 39, No 11, pp. 4302-4314, 2000.
293. J. Azinheira, E. de Paiva, J.R. Carvalho, J. Ramos, S. Bueno, M. Bergerman, P.
Ferreira, "Lateral/Directional Control for an Autonomous Unmanned Airship",
Aircraft Engineering and Aerospace Technology, vol 73,Nr 5, 2001, pp 453-458
294. J. M. F. Calado, J. Korbicz, K. Patan, R. J. Patton e J. M. G. Sá da Costa, “Soft
Computing Approaches to Fault Diagnosis for Dynamic Systems”. European
Journal of Control, Vol. 7, No. 2-3, pp. 248-286, 2001.
295. J. M.F. Calado, José M.G. Sá da Costa, “An Expert System Coupled with a
Hierarchical Structure of Fuzzy Neural Networks for Fault Diagnosis”,
International Journal Appl. Math. and Comp. Sci, 1999, Vol. 9, Nº 3, pp 667-687.
296. J. N. Pires, J. Sá da Costa, “Object-oriented and distributed approach for
programming robotic manufacturing cells”. Robotic and Computer Integrated
Manufacturing, 16 (1), pp. 9-27, Feb. 2000.
30
297. J.M. Sousa and M. Setnes. Fuzzy Predictive Filters in Model Predictive Control.
IEEE Transactions on Industrial Electronics, 46(6): 1225-1232, 1999.
298. J.M. Sousa and U. Kaymak. “Model Predictive Control Using Fuzzy Decision
Functions”. IEEE Transactions on Systems, Man, and Cybernetics Part B:
Cybernetics, 31(1): 54-65, Feb. 2001.
299. J.M. Sousa, Fuzzy Model-Based Control of Complex Processes. The Annals of the
Marie Curie Felloship Association, 1(1), 2000.
300. J.M. Sousa, Optimization issues in predictive control with fuzzy objective
functions. International Journal of Intelligent Systems, 15(9): 879-899, Sept. 2000.
301. L. F. Baptista, M. Ayala Botto, J. Sá da Costa, “A predictive force control approach
of robotic manipulators in non-rigid environments”. International Journal of
Robotics and Automation, Vol. 15, No 2, pp. 94-102, 2000.
302. L.F. Baptista, J.M. Sousa and J. Sá da Costa, “Force control of robotic manipulators
using a fuzzy predictive approach”. Journal of Intelligent and Robotic Systems,
30(4): 359-376, April 2001.
303. L.F. Baptista, J.M. Sousa and J. Sá da Costa, “Fuzzy predictive algorithms applied
to real-time force control”. Control Engineering Practice, 9(4): 411-423, April
2001.
304. M. Ayala Botto, Bart Wams, T. van den Boom, J. Sá da Costa, “Robust stability of
feedback linearised systems modelled with neural networks: dealing with
uncertainty”. EAAI - Engineering Applications of Artificial Intelligence, Vol. 13,
No 6, 659-670, 2000.
305. M. Ayala Botto, Ton van den Boom, Ardjan Krijgsman, José Sá da Costa,
“Predictive control based on neural network models with I/O feedback
linearization”, International Journal of Control, Vol. 72, No 17, pp. 1538-1554,
1999.
306. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Cold Forging of Gears:
Experimental and Theoretical Investigation”, Finite Elements in Analysis and
Design, Vol. 37, 549-558, 2001.
307. Baptista R. M. S. O. e Antunes J. F. C. P.S., “3 and 5 Axis Milling of Sculpured
Surfaces”, Journal of Materials Processing Technology, Vol. 103 (3), July 2000.
308. A.P. Costa, L. Quintino “Hard Metals Irradiation by a (CW) CO2 Laser Beam”,
International Journal for the Joining of Materials 12(4), 118-123, 2000.
309. P.F.Cunha, R.M.Mesquita, J.F.O’Kane; “A Methodology for the Evaluation of
Process and Production Planning”; Journal of Materials Processing Technology;
107; PP.79-87; 2000
310. Fernandes J. L. M., Rodrigues J. M. C. e Martins P. A. F., “Combined Finite
Element-Boundary Element Thermo-Mechanical Analysis of Metal Forming
Processes”, Journal of Materials Processing Technology, Vol. 87, pag. 247-257,
1999.
31
311. Ferreira, J.C., “A Note on a Numerically Controlled Precision System for Sheet
Metal Bending Tests”, in “Journal of Materials Processing Technology”, edited
ELSEVIER Science S.A., vol. 110/2, p.p. 244-248, February 2001.
312. V.Gonçalves, “Modelling Keyhole Pulse Laser Welding” – Part 1 – Energy Balance
of Keyhole Pulsed Laser Welding, Aceite para publicação no Welding Journal.
313. V.Gonçalves, “Modelling Keyhole Pulse Laser Welding” – Part 2 – Operative
Times for the Process of Laser Welding, Aceite para publicação no Welding
Journal.
314. Gouveia B. P. P. A., Rodrigues J. M. C., Bay N. e Martins P. A. F., “Finite Element
Modelling of Cold Forward Extrusion”, Journal of Materials Processing
Technology, Vol. 94, pag. 85-93, 1999.
315. Gouveia B. P. P. A., Rodrigues J. M. C. e Martins P. A. F., “Ductile Fracture in
Metalworking An Experimental and Theoretical Research”, Journal of Materials
Processing Technology, Vol. 101, 52-63, 2000.
316. Gouveia B. P. P. A., Rodrigues J. M. C., Bay N. e Martins P. A. F., “Deformation
Analysis of the Round-to-Square Extrusion: A Numerical and Experimental
Investigation”, Finite Elements in Analysis and Design, Vol. 35, 269-282, 2000.
317. Gouveia B. P. P. A., Rodrigues J. M. C., Martins P. A. F. e Bay N., “Physical
Modelling and Numerical Simulation of the Round-to-Square Forward Extrusion”,
Journal of Materials Processing Technology, Vol. 112, 244-251, 2001.
318. Martins P. A. F. e Barata Marques M. J. M., “Upper Bound Analysis of Plane Strain
Rolling Using a Flow Function and the Weighted Residuals Method”, International
Journal for Numerical Methods in Engineering, Vol. 44, 1671-1683, 1999.
319. Martins P. A. F. e Barata Marques M. J. M., “Upper Bound Analysis of Plane Strain
Rolling Using a Flow Function and the Weighted Residuals Method”, International
Journal for Numerical Methods in Engineering, Vol. 44, 1671-1683, 1999.
320. Ruy Mesquita, José Dionísio, Pedro Cunha, Elsa Henriques, B. Janz, “Usability
Engineering: VR interfaces for the next generation of production planning and
trainning systems”, Computer Graphics Topics, 5/2000 Vol.12.
321. Ruy Mesquita, Pedro Cunha, Elsa Henriques, Luís Grave, António Silva, “VRDES
– Integrated Use of VR and DES Technologies for Manufacturing Systems
Planning”, Computer Graphics Topics, 5/2000 Vol.12.
322. Petersen S. B., Rodrigues J. M. C. e Martins P. A. F., “Automatic Generation of
Quadrilateral Meshes for the Finite Element Analysis of Metal Forming Processes”,
Finite Elements in Analysis and Design, Vol. 35, 157-168, 2000.
323. I.Pires, L. Quintino, C.M. Rangel, G.E. Thompson, P. Sheldon and X. Zhou
“Influence of Pre-treatments on the Surface Condition of 2024-T3 Aluminium
Alloy”, Transations of the Institue of Metal Finishing, vol. 78 Port. 5, September
2000.
32
324. Pires, L. Quintino, C.M Rangel, G.E. Thompson, P.Skeldon, X.Zhou, "PreTreatment of 2024 Aluminium Alloy for Adhesive Bonding", ATB Metallurgie, vol.
xxx, pp. 603-607, 2000
325. L. Quintino, R. Ribeiro, J. Faria, “Classification of GMAW Transfer Modes Using
Neural Networks”, International Journal for the Joining of Materials, Vol. 11, nº 1,
6-8, 1999.
326. L. Quintino, “European Scheme for Training, Qualification and Certification in
Welding Technology or Past, Present and Future of EWF”, Hegesztés-Technika,
évofolyam 2.szám, 13-17, 1999.
327. L. Quintino et al, “L’ impiego Delle Reti Neurali in Saldatura”, Lamiera, 2000.
328. L. Quintino, P. Vilaça, R. Rodrigues, L. Bordalo, “Laser Beam Welding of
Automobile Hinges. A Laser Welding Procedure for Joining the Hinges to
Reinforcement Structure of Car Doord is Technological and Mechanically
Evaluated”, Welding Journal, vol.80, n. 11, pp. 261s-267s, Novembro de 2001.
329. J. C. Rebelo, A. M. Dias, R. Mesquita, P. Vassalo, M. Santos, “An experimental
study on electro discharge machining and polishing of high strength copper
beryllium alloys”, Journal of Materials Processing Technology, 1999, accepted
330. J.C. Rebelo, A. Morão Dias, Ruy Mesquita, Paulo Vassalo, Mário Santos, “An
experimental study on electro-discharge machining and polishing of high strengh
copper-beryllium alloys”, Journal of Materials Processing Technology 103 (2000)
389-397.
331. José Simões, Timothy J. Coole, David G. Cheshire, Ruy M. D. Mesquita, “Analysis
of CNC Machining Technology in the Production of Plaster Moulds” em
colaboração com, British Ceramic Transactions – International Journal, Vol. 100,
Nº 3, pp. 134-139, 2001, ISSN 0967-9782.
332. José Simões, Timothy J. Coole, David G. Cheshire, Ruy M. D. Mesquita, “Analysis
of robot system capabilities in machining of full scale prototypes for sanitary ware
industry” com, British Ceramic Transactions – International Journal, Vol. 99, Nº 4,
pp. 175-178, 2000, ISSN 0967-9782.
333. Xiong S., Rodrigues J. M. C. e Martins P. A. F., “Simulation of Plane Strain
Rolling Through a Combined Finite Element-Boundary Element Approach”,
Journal of Materials Processing Technology, Vol. 96, pag. 173-181, 1999.
334. Xiong S., Rodrigues J. M. C. e Martins P. A. F., “Three Dimensional Simulation of
Flat Rolling Through a Combined Finite Element-Boundary Element Approach”,
Finite Elements in Analysis and Design, Vol. 32, 221-233, 1999.
335. Xiong S., Xianghua L., Guodong W., Martins P. A. F., Sihai J. e Jianguang Y.,
“Three Dimensional Thermo-Mechanical Finite Element Simulation of the Vertical
Rolling Process”, Journal of Materials Processing Technology, Vol. 110, 89-97,
2001.
33
336. M. Webster, L.M.C. Gato, "The Effect of Rotor Blade Sweep on the Performance
of the Wells Turbine". International Journal of Offshore and Polar Engineering, vol.
9(3), p. 233-239, 1999.
337. P.A.P. Justino, A.F. de O. Falcão, “Rotational Speed Control of an OWC Wave
Power Plant”. ASME Journal of Offshore Mecanics and Arctic Engineering, vol.
65, p.65-70, 1999.
338. A.F. de O. Falcão, P.A.P. Justino, “OWC Wave Energy Devices with Air-flow
Control”. Ocean Engineering, vol. 26, p.1249-73, 1999.
339. M. Webster, L.M.C. Gato, "The Effect of Rotor Blade Shape on the Performance of
the Wells Turbine" International Journal of Offshore and Polar Engineering, Vol.
11, No. 3, p. 227-230, 2001.
340. L.M.C. Gato, M. Webster, "An Experimental Investigation into the Effect of Rotor
Blade Sweep on the Performance of the Variable-Pitch Wells Turbine”,
Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power
Engineering, Vol. 215, No A5, p. 611-622, 2001.
341. A.F. de O. Falcão, “Wave power absorption by a periodic linear array of oscillating
water columns”, accepted for publication in Ocean Engineering.
342. Brito-Melo, L.M.C. Gato, A.J.N.A. Sarmento, “Analysis of Wells Turbine Design
Parameters by Numerical Simulation of the OWC Performance”, accepted for
publication in Ocean Engineering.
343. Malico and J.C.F. Pereira (1999). "Numerical predictions of porous burners with
integrated heat exchanger for household applications". Journal of Porous Media,
2(2), pp. 153-162.
344. J.C.F. Pereira and J.M.M. Sousa (1999). "Confined vortex breakdown generated by
a rotating cone". J. Fluid Mech., 385, pp. 287-323.
345. M.H. Kobayashi, J.M.C. Pereira and J.C.F. Pereira (1999). "A conservative finitevolume 2nd order accurate projection method on hybrid unstructured grids".
Journal of Computational Physics, 150, pp. 40-75.
346. X.-Q. Chen and J.C.F. Pereira (1999). "A New Particle-Locating Method
Accounting for source Distribution and Particle-field interpolation for hybrid
Modelling of strongly coupled two-Phase flows in arbitrary coordinates".
Numerical Heat Transfer, Part B, 35, pp. 41-61.
347. X.-Q. Chen and J.C.F. Pereira (1999). “Computational modeling of two-phase
flows with particles and droplets”. Trends in Heat, Mass & Momentum Transfer, 5,
pp. 81-99.
348. M.H. Kobayashi (1999) "On a class of Padé finite volume methods", Journal of
Computational Physics (156), pp. 137-180.
349. Freek, C., Sousa, J.M.M., Wentschel, W., Merzkirch, W. (1999) On the Accuracy
of an MJPEG-Based Digital Image Compression PIV-System, Experiments in
Fluids, Vol. 27, pp. 310-320
34
350. X.-Y. Zhou and J.C.F. Pereira (2000). "A Multidimensional Model for Simulating
Vegetation Fire Spread Using a Porous Media Sub-model". Fire and Materials, 24,
pp. 37-43.
351. J.M.M.Sousa and J.C.F.Pereira (2000) “Rollup Region of a Turbulent Trailing
Vortex Issued from a Blade with Flow Separation” Experimental Thermal and
Fluid Science, 20 (3-4) pp 150-161.
352. Malico, X.-Y. Zhou and J.C.F. Pereira (2000). "Two-dimensional Numerical Study
of Combustion and Pollutants Formation in Porous Burners". Combustion Science
and Technology, vol. 152, pp 57-79.
353. X.-Q. Chen and J.C.F. Pereira (2000). “Computational modeling of a dilute
turbulent liquid-solid flow using a Eulerian Lagrangian approach”, Int. J. of
Numerical Methods for Heat & Fluid Flow, 10:4, pp 409-432.
354. X.-Y. Zhou and J.C.F. Pereira (2000). "Large Eddy Simulation of a Reacting Plane
Mixing Layer Using Filtered Density Function Closure". Flow, Turbulence and
Combustion, 64, pp 279-300.
355. Malico, J.C.F. Pereira, (2001). "Numerical Study on the Influence of Radiative
Properties in Porous Media Combustion". ASME Journal of Heat Transfer, 123,
pp.951-957.
356. J.M.C.Pereira and J.C.F.Pereira (2001). “Fourier Analysis of Several Finitedifference Schemes for the 1D Unsteady Convection-Diffusion Equation”. Int. J. of
Numer. Meth. In Fluids, 36, pp 417-439.
357. N.P.C. Marques and J.C.F.Pereira (2001). “Comparison of three second-order
accurate reconstruction schemes for 2D Euler and Navier-Stokes compressible
flows on unstructured grids”. Com. In Numer. Meth. In Engineering, 17, pp 309323.
358. J.M.C. Pereira, M.H. Kobayashi and J.C.F. Pereira (2001). "Fourth Order Accurate
Finite Volume Compact Scheme for 2D Incompressible Navier-Stokes Solutions".
Journal of Computational Physics, 167, pp 217-243.
359. J.C.F.Pereira, M.Costa and I.Malico (2001). “Experimental & Numerical
Investigation of a Porous Counterflow Heat Exchanger Model”, J. Enhanced Heat
Transfer, 8, pp. 185-200.
360. H.M.A. Castro, M.H. Kobayashi and W.M. Oliva (2001) "Partially hyperbolic Sgeodesic flows", Journal of Differential Equations (169), pp. 142-168
361. Afgam, N., Sustainability Assessment of New and Renewable Energy Sources,
International Journal Energy, ( accepted for publication), 2001.
362. Afgam, N., Sustainability Assessment of Natural Gas Turbines, International
Journal Applied Engineering ( accepted for publication),2001.
363. Afgam, N., Sustainability Assessment of Heat Sink, Thermal Engineering,
(accepted for Publication, 2001.
35
364. Afgam, N., Multi-criteria Sustainability Assessment of Clean Air Technologies,
FEMENA International Journal of Mechanical Engineering Faculty Zagreb (
accepted for publication), 2001.
365. Afgan, N., Darwish, M. and Carvalho, M.G. - "Sustainability Assessment of
Desalination Plants for Water Production". Apresentado na European Conference
on Desalination and the Environment, Las Palmas, Gran Canaria, Espanha, 9-12
November 1999. Desalination, N° 124,1999, pp. 19-31.
366. Afgan, N., He, X., Carvalho, M.G. and Azevedo, J.L.T. - "Knowledge Based
System for Fouling Assessment of Power Plant Boiler". Heat and Technology, Vol.
17, N° 1, 1999, pp. 63-70.
367. Afgan, N., Leontiev, A.I., Puzach, S.V.," New Method in Average Velocity
Measurement in High Temperature Gas" Izmeritelnaia Teknika, (No.9, 1999, pp.5152)
368. Afgan, N., "Sustainability Development in Thermal Engineering", Editorial, Heat
Transfer Engineering, (Vol.20.No.4, 1999, pp.1-2)
369. Afgan, N., Carvalho, M.G. and Cumo, M. - "The Concept of Sustainable Energy
Development". Thermal Engineering, Vol. 47, No. 3, March 2000, pp. 266-274.
370. Afgan, N., Leontiev, A.I., Puzach, S.V., (1), New Method in Average Velocity
Measurement in High Temperature Gas Measurement Technique,42(9),894-896,
Sept 1999.
371. Afgan, N., Carvalho, M.G. and Hovanov, N. - "Energy System Assessment with
Sustainability Indicators". Energy Policy, Vol. 28, 2000, pp. 603-612.
372. Alves, L.M., Costa, A.L. and Carvalho, M.G. - "Analysis of Potential for Market
Penetration of Renewable Energy Technologies in Peripheral Islands". World
Renewable Energy Congress - V, Florence, Italy, 20-25 September 1998.
Renewable Energy, No. 19, 2000, pp. 311-317.
373. Ayres, D., Caldas, M., Semião, V. and Carvalho, M.G. - "Prediction of the Droplet
Size and Velocity Joint Distribution for Sprays". Fuel, Vol. 80, No. 3, February
2001, pp. 383-394.
374. Brasil, A. M., Farias, T. L., Carvalho, M. G. and Koylu, U.O.. “Numerical
Characterization of the morphology of aggregated particles”, Journal of Aerosol
Science, Vol, 32, 489-508, 2001.
375. Brasil, A M., Farias, T. L., e Carvalho, M. G., Recipe for Image Chracterization of
Fractal-Like Aggregates" apresentado na 5ft International Aerosol Conference,
setembro de 1998, Edinburgo, Escócia, e publicado no Journal of Aerosol Science,
Vol. 30, 10, 1379-1389, 1999.
376. Brasil, A. M., Farias, T. L., and Carvalho, M. G., “Evaluation of the Fractal
properties of cluster-cluster aggregate”, Aerosol Science and Technology, Vol. 33;
pp. 440-454, 2000.
36
377. Caldas, M., e Semião, V., "Modeling of optical properties for a polydispersion/gas
mixture" Journal of Quantitative Spectroscopy and Radiative Transfer, 1999, Vol.
62 (No. 4), pp 495-501.
378. Caldas, M., e Semião, V.,. Modeling of scattering and absorption coefficients for a
polydispersion . International Journal of Heat and Mass Transfer, 1999, Vol. 42
(No. 24), pp 4535 - 4548.
379. Caldas, M. e Semião, V., Radiative properties of small particles: extension of
Penndorf model, Journal of the Optical Society of America A, 2001, Vol. 18 (No.
4), pp. 831-838.
380. Caldas, M. e Semião, V., An efficient procedure to evaluate asymptotic limits of
particles scattering efficiency and asymmetric factor, International Journal of Heat
and Mass Transfer, 2001, Vol. 44 (No.12), pp. 2375-2378.
381. Caldas, M. e Semião, V., On the ice melting problem from heat load in sub-surface
habitational modules in cold regions: numerical modeling, H. Cavaca, Cold Regions
Science and Technology, 2001, Vol. 32 (No.1), pp. 45-62.
382. Caldas, M. e Semião, V., A new approximate phase function for isolated particles
and polydispersions, Journal of Quantitative Spectroscopy and Radiation Transfer,
2001, Vol. 68 (No. 5), pp. 521-542.
383. Coelho, P.J., P.A. Novo e M.G. Carvalho, “Modelling of a Utility Boiler Using
Parallel Computing”, The Journal of Supercomputing, Vol. 13, No 2, pp. 211-232
(1999).
384. Coelho, P.J. e J. Gonçalves, “Parallelization of the Finite Volume Method for
Radiation Heat Transfer”, Int. J. Numerical Methods in Heat and Fluid Flow, Vol.
9, No 4, pp. 388-404 (1999).
385. Coelho, P.J., “Parallel Simulation of a Utility Boiler. Part I. Mathematical Model
and Numerical Solution Method”, Communications in Numerical Methods in
Engineering, Vol. 15, pp. 717-726 (1999).
386. Coelho, P.J., “Parallel Simulation of a Utility Boiler. Part II. Model Evaluation and
Parallel Performance”, Communications in Numerical Methods in Engineering,
Vol. 15, pp. 727-736 (1999).
387. Coelho, P.J., “Mathematical Modeling of the Convection Chamber of a Utility
Boiler — The Theory”, Numerical Heat Transfer. Part A: Applications, Vol. 36, No
4, pp. 429-447 (1999).
388. Coelho, P.J., “Mathematical Modeling of the Convection Chamber of a Utility
Boiler — An Application”, Numerical Heat Transfer. Part A: Applications, Vol. 36,
No 4, pp. 411-428 (1999).
389. Coelho, P.J., “An Engineering Model for the Calculation of Radiative Heat Transfer
in the Convection Chamber of a Utility Boiler”, J. Institute of Energy, Vol. 72, pp.
112-121, December (1999).
390. Coelho, P.J. e N. Peters, “Numerical Simulation of a Mild Combustion Burner”,
Combustion and Flame, Vol. 124, Nº 3, pp. 503-518 (2001).
37
391. Coelho, P.J. e N. Peters, “Unsteady Modelling of a Piloted Methane/Air Jet Flame
Based on the Eulerian Particle Flamelet Model”, Combustion and Flame, Vol. 124,
Nº 3, pp. 444-465 (2001).
392. Cunha, J. and Azevedo, J.L.T. 'Modelling the integration of a compact plate steam
reformer in a fuel cell system, Journal of Power Sources, 86(1/2), 515 - 522, 2000.
393. Duic, N., Alves, L.M. and Carvalho, M.G. – “Potential of Kyoto Protocol in
Transfer of Energy Technologies to Insular Countries”. Transactions of Famena,
Vol. 25, No. 2, 2001, pp. 27-38.
394. Geraldes, V., Semião, V. e Pinho, M.N., Flow and mass transfer modelling of
nanofiltration, Journal of Membrane Science, 2001, Vol. 191 (No. 1-2), pp. 109128.
395. Gobaisi, Darwish Al, Afgan, Naim H., Sustainability Assessment of Desalination
Plants, IDA News Letter, No., 2000.
396. Jovic, V., and Afgan, N., "Transient Characteristics Of Adiabatic Two Phase Flow
In Parallel Vertical Channels", Thermal Sciences (Vol.5, No.3, 1999, pp. 34-42).
397. Jovic, V., Jovic, L., Afgan, N., Transient Characteristics of Adiabatic Two Phase
Flow In Parallel Vertical Channels, Thermal Sciences, Vol.5,No.3, 1999, pp.34-42,
2000.
398. Magrinho, A., Semião, V. and Carvalho, M.G. - "Energy and Environmental
Analysis of an Entire Coke Production Plant using ECLIPSE". International Journal
on Energy Research, Vol. 25, No. 2, February 2001, pp. 93-106.
399. Martins, N., Carvalho, M. G., Afgan, N. H., Leontiev, A. I.,Convection Heat Flux
Measurement, International Journal for Heat and Technology,Vol.17,No.1,pp.6370, 1999.
400. Martins, N., Carvalho, M.G., Afgan, N. and Leontiev, A. I. - "A Radiation and
Convection Fluxmeter for High Temperature Applications". Experimental Thermal
and Fluid Science, Vol. 22, Nos. 3-4, October 2000, pp 165-173.
401. Pereira, J. C. F., Costa, M. and Malico, I. (2001). Experimental and numerical
investigation of a porous counterflow heat exchanger model. Journal of Enhanced
Heat Transfer, 8, 185-200.
402. Ruão, M., Costa, M and Carvalho, M.G. - "A NOx Diagnostic System Based on a
Spectral Ultraviolet/Visible Imaging Device". Fuel, Vol. 78, 1999, pp. 1283-1292.
403. Semião, V., Geraldes, V., and Pinho, M.N., Numerical modelling of mass transfer
in slits with semi-permeable membrane walls., Engineering ComputationsInternational Journal for Computer-Aided Engineering and Software, 2000, Vol. 17
(No. 3), pp. 192-217.
404. Xu, M., He, X., Azevedo, J. L. T. and Carvalho, M.G. - “Flexibly Using Results of
CFD and Simplified Heat Transfer Model for Pulverized Coal Fired Boilers”.
International Journal of Energy Research, Vol. 24, No. 13, October 2000, pp. 11611169.
38
405. Xu, M., Xu, M.H., Azevedo, J.L.T. and Carvalho, M.G., Modelling of the
combustion process and NOx emission in a utility boiler.- Fuel 79 (13):1611-1619,
October, 2000.
Papers in Refereed National Journals:
1.
Paulo Peças, Elsa Henriques, “A Metodologia SMED nas Empresas Nacionais de
Estampagem”, accepted in “Revista Tecnometal”, Agosto, 2004
2.
Rui Baptista; Beatriz Silva, “Fabrico Rápido de Ferramentas de Estampagem”, O
Molde - Revista da CEFAMOL, Associação Nacional da Indústria de Moldes, Ano
17, n. 62, pp. 42 - 43, Junho 2004.
3.
“Hidrogénio e pilhas de combustível: que futuro no mundo automóvel?, Journal of
the Automóvel Clube de Portugal, Edition of May/June de 2004
4.
P. Lima, J.M. Sousa, M. I. Ribeiro, C. Cardeira and L. Custódio. Robótica 2003 –
3º Festival Internacional de Robótica, In Robótica (Portuguese Journal) 1:10-14,
2003
5.
L. Quintino, P. Vilaça, V. Gonçalves, “Soldadura por Laser e Nd:YAG, em Liga de
Alumínio”, Tecnologia e Qualidade, n. 46, 29-32, 2003.
6.
Gonçalves V, Salema A. "Análise Comparativa entre os Processos Laser e Tig
Pulsados na Soldadura de Materiais Dissimilares” , Robótica, n. 50, 2003.
7.
Gonçalves V, Salema A. "Soldadura Laser CO2 de Materiais Dissimilares”,
Tecnologia e Qualidade, série III, n. 45, 2003.
8.
Ferreira, J.C., “Fracture Analysis in Powder Metallurgy Tool Made by RT-DMLS”,
Journal Ciência & Tecnologia dos MATERIAIS, Vol. 15, nr.1/2, 28-31, 2003.
9.
Paulo Peças, Elsa Henriques and Nuno Aguiar, ”Fresagem a Alta-Velocidade no
Fabrico de Moldes”, Tecnometal, Nº146, 17-24, 2003.
10. Paulo Peças, Elsa Henriques and Pedro Almeida, ”A Exploração das Tecnologias e
a Competitividade das Empresas de Moldes”, O Molde, Ano 16, Nº56, 14-21, 2003.
11. Paulo Peças, Pedro Almeida and Elsa Henriques, ”A Indústria de Moldes e as
Tecnologias Emergentes de Electro-Erosão de Penetração”, O Molde, Ano 16,
Nº57, 2003.
12. Joaquim Menezes, Rui Tocha and Elsa Henriques, “O Sector de Moldes Afirma o
Futuro com a Europa na Inovação - Mouldmaking Industry Asserts the Future with
Europe in Innovation”, O Molde, Ano 16, Nº 60, 44-49, 2003.
13. Domingos, T. (2003). Agricultura e Alimentação em Portugal: Sustentabilidade e
Dinamização Empresarial. Suplemento ao Semanário Económico.
14. Magalhães, M. R. (2003). A Estrutura Ecológica Metropolitana de Lisboa.
Arquitectura e Vida 34.
39
15. Magalhães, M. R. (2003). O Plano Integrado de Almada – Monte da Caparica. In
Museu de Évora et al., Catálogo da Exposição “Gonçalo Ribeiro Telles – A Utopia
e os Pés na Terra”, Évora.
16. Mota, R. (2003). Ecosystem management: Optimal policies with structural
dynamics. Trabalho Final de Curso da Licenciatura em Engenharia do
Ambiente,Instituto Superior Técnico.
17. Fernandes, P. R., “Um Modelo Computacional para a Simulação do Processo de
Remodelação Óssea”, ACE-News, Applied Computing Engineering News, Vol. 1,
no. 3, pp. 6-10, 2002.
18. Fernandes, P.R., Folgado, J. And Rodrigues, H., “Modelos Computacionais e
Experimentais para a análise e projecto de próteses da anca”, Mecânica
Experimental, nº8, pp.67-78, 2002.
19. Pedradas, A., Dimitrovová, Z., Travassos, J. “Simulação Numérica do
Comportamento de Estruturas em Materiais Compósitos”, Mecânica Experimental,
nº 8, (2002).
20. Silva, J. M. M., Siopa, J. “Implementação de Técnicas de Controlo de Condição
(Metodologia de Apoio à Decisão)” - Mecânica Experimental (APAET Journal),
no. 7, pp.113-122, 2002
21. J. Reis, Ramalho, M., “ Sobre a Utilização de um Sistema de Vídeo na Identificação
de Robôs com Flexibilidade Estrutural”, Revista Robótica, I trimestre 2002, nº 46,
pp. 26-30.
22. P. Vilaça, P. Magalhães, H. Gouveia, L. Quintino “Sistemas de Controle e
Monitorização de Soldadura”, Robótica, nº 47, pp. 11-19, II trimestre 2002.
23. Gonçalves V.M., Salema A., "Soldadura Laser CO2 de Ligações Dissimilares
“Cobre/Inóx", Tecnologia nº 45, 2002.
24. Gonçalves V.M., Salema A., "Análise Comparativa entre a Soldadura Laser e TIG
Pulsado de Materiais Dissimilares", Robótica nº 46, 2002.
25. Peças P., Henriques E., Almeida P., "As Tecnologias Emergentes da Electro-erosão
de Penetração", O Molde, nº 55, Cefamol, Dezembro, 2002.
26. Magalhães, M. R. (2002). Cidades e Território. Ambiente 21, nº 4, ano I,
Junho/2002.
27. Sarmento, M., Duarte, M. e Barata, A. (2002), “Os Princípios Contabilísticos e o
Ambiente”, Jornal do Técnico de Contas e da Empresa – Revista de Economia,
Finanças e Contabilidade, n.º 441, 179-182.
28. Sarmento, M., Duarte, M. e Barata, A. (2002), “O Impacto Ambiental nas
Demonstrações Financeiras”, Jornal de Contabilidade, October, n.º especial dos 25
anos.
29.
Ambrósio J, Silva M, “Metodologias de Análise Dinâmica Inversa: Relação Entre A
Qualidade Dos Dados e Resultados”, Perspectivas XXI: Sociedade, Espaço e
Tecnologia, 4(7), 2001.
40
30. Fernandes P, Folgado J, Rodrigues H, “Modelos Computacionais e Experimentais
para a análise e projecto de próteses da anca”, Mecânica Experimental, 2001 (in
print).
31. Graça M, “Efeitos colaterais no uso de máquinas de calcular”,
Matemática, nº 139, 15-21, 2000.
Gazeta de
32. Jacinto L, Abrantes J, Gusmão N, Condeça B, “Análise Cinemática e Dinâmica da
Marcha, como base para decisões clínicas - A propósito de um caso de paraplegia
espástica”, Revista de Medicina Física e Reabilitação, nº1, ano 9 (9-13).
33. Pedradas A, Dimitrovová Z, Travassos J “Simulação Numérica do Comportamento
de Estruturas em Materiais Compósitos”, Mecânica Experimental, in press, 2001.
34. Silva, J.M.M., Nunes, N.A.N., Rodrigues, A.D., Cabral, T.B., "Avaliação da
Condição por Análise de Vibrações dos Motores Allison T56 que Equipam as
Aeronaves C-130 e P3" (Condition Monitoring of the Allison T56 Engines Used on
the C-130 and P3 Aircrafts, Using Vibration Analysis) - Ingenium, a journal of the
“Ordem dos Engenheiros” (Portuguese Engineers Association), II Série, Nº 62, pp.
91-94, October 2001.
35. Silva, J.M.M., Silva, J.A.B.D., Figueiras, L., Marques, J.D.F.S., Pereira, A.,
“Desenvolvimento de Técnicas de Medição das Forças de Contacto entre Roda e
Carril em Veículos Ferroviários, em Condições Reais de Funcionamento”
(Development of Techniques for the Measurement of Wheel/Rail Contact Forces in
Railway Vehicles Under Real Working Conditions) - Mecânica Experimental
(Experimental Mechanics), Revista da APAET (a journal of the Portuguese
Association for Experimental Stress Analysis), nº 6, pp.99-108, 2001.
36. Almeida, L., Azevedo, J., Cardeira, C., Fonseca P., Lima P., Ribeiro F., Santos V.,
“Robótica’2001- Festival Nacional de Robótica”, in Robótica, IV trimestre 2001, nº
45, pp. 60-64.
37. J. Sá da Costa, “Evolução da Robótica de Manipulação Industrial", Robótica, vol.
IV, nº37, pp 4-5, 1999.
38. J.M.F. Calado, J. Sá da Costa, “Inteligência Artificial Aplicada ao Controlo de
Processos Industriais”, Manutenção, Publicação Trimestral, Nº 60 – 1º Trimestre,
Associação Portuguesa de Manutenção Industrial, pp 4-9, 1999.
39. L. F. Baptista, J. Sá da Costa, “Controlo de Força de Robôs Manipuladores: uma
abordagem experimental”, in Robótica, Nº 40/41, pp.22-30, 3ºtrim. 2000.
40. S. Bueno, J. Ramos, M. Bergerman, E. de Paiva, J. Azinheira, S. Maeta, L.
Mirisola, B. Faria, A. Elfes, "Um Dirigível Não-Tripulado para Inspecção Aérea
Robotizada", in Robótica, Nº39, pp8-10, 2ºtrim.2000.
41. Faria, L., Ferreira, J.C., “A Prototipagem Rápida e a Indústria de Fundição –
Futuros Desenvolvimentos”, in journal “INGENIUM” from “Portuguese
Engineering Society”, p.p.77-78, II-43, December 1999.
41
42. Faria, L., Ferreira, J.C., “A Prototipagem Rápida e a Indústria de Fundição”, in
journal “Ciência & Tecnologia dos MATERIAIS”, from “Portuguese Material
Society, p.p.4-6, vol. 11, 1/1999, edited 1999.
43. Ferreira, J.C., “Cast Chilled Iron and Wear Evaluation for Automotive”, in journal
“Ciência & Tecnologia dos MATERIAIS”, from “Portuguese Material Society,
p.p.58-65, vol. 13, 4/2001, December 2001.
44. Ferreira, J.C., “As Tecnologias de Informação e Comunicação para o
Desenvolvimento da Engenharia Mecânica”, in journal “INGENIUM” from
“Portuguese Engineering Society”, p.p. 72-74, II-57, April 2001.
45. Ferreira, J.C., Höhne, G., Nönnig, R., Hess, D., Hoffmann, R., “Sheet Metal StressStrain Bending Tests with an Innovative Mechatronic Precision System”, in journal
“Ciência & Tecnologia dos MATERIAIS”, from “Portuguese Material Society,
p.p.18-24, vol. 13 1/2001, March 2001.
46. Ferreira, J.C., Silvestre Dias Antunes, S.D., Höhne, G., Nönnig, R., Gouvêa, J.L.C.,
“Computer Aided Adjustment for Lens Assemblies”, in journal “Ciência &
Tecnologia dos MATERIAIS”, from “Portuguese Material Society, p.p.14-18,
vol.13, 1/2001, March 2001.
47. Ferreira, J.C., Alves, N.M.F., “Mecânica Computacional para Optimização de Peças
e Processos antes da Prototipagem Rápida”, in journal “Ciência & Tecnologia dos
MATERIAIS”, from “Portuguese Material Society, p.p. 22-31, vol.12 2/2000,
September 2000.
48. Ferreira, J.C., “Microtechnology for Micromechanical Systems and Actuators”, in
journal “Ciência & Tecnologia dos MATERIAIS”, from “Portuguese Material
Society, p.p.45-48, vol.11, 2/1999, edited 2000.
49. V: Gonçalves, B. Castro, F.Freire, “Soldalaser – Programa de Cálculo de
Parâmetros de soldadura laser e Análise da susceptibilidade a Problemas
Metalúrgicos”, publicado na “Tecnologia e Qualidade”, 2000
50. Ruy Mesquita, Pedro Sena Ferreira, Fernando Certo Simões, "Fabrico rápido de
protótipos e ferramentas por estereolitografia e engenharia inversa", O Molde,
Setembro, 2000.
51. Ruy Mesquita, “O contributo do Projecto para o Desenvolvimento Tecnológico do
Sector”, O Molde, Junho, 2000.
52. Ruy Mesquita, Reis Costa, Mário Carvalho, Mário Santos, “Electroerosão avançada
de aços, ligas de Cu/Be e Carbonetos de Tungsténio para moldes e matrizes”, O
Molde, Junho, 2000.
53. Ruy Mesquita, Pedro Sena Ferreira, Luís Raposo, “Fresagem a alta velocidade de
aços temperados e eléctrodos de paredes finas”, O Molde, Junho, 2000.
54. Ruy Mesquita, Luís Raposo, José Sousa, Mário Carvalho, Eduardo Alexandre,
“Aplicações da maquinagem por escoamento abrasivo na indústria de moldes e
ferramentas especiais”, O Molde, Junho, 2000.
42
55. L. Quintino“O IIW Visto por Dentro”, Tecnologia e Qualidade, vol. 34, n. 4, pp.
12-14, Abril/Junho de 1999.
56. L. Quintino, P. Vilaça, "Soldadura por Fricção Linear, O que a Indústria Portuguesa
precisa de saber", Tecnologia e Qualidade, 2000.
57. Lopes,Marta, Domingos, Tiago, Águas, Miguel (1999),Energia e sustentabilidade
em reabilitação de edifícios rurais: um estudo de caso Qualirama – Boletim do
Instituto Português de Qualidade (IPQ), Número 55, Maio/Junho.
58. Carvalho, M.G. – “ A Cooperação Científica para o Desenvolvimento Sustentável –
A sua Implementação no Contexto da CPLP”. INGENIUM – Journal of the Ordem
dos Engenheiros, November 2001, No. 63, II Series, pp 18-22.
59. Pinto, P., Mendes, J., Semião, V., e Bispo, C., A utilização do ECLIPSE na análise
energética de processos industriais: o caso do cimento. INGENIUM, 1999, II
Series, No. 37, pp. 88 - 94.
Papers in Proceedings of International Conferences:
1.
A.L. Araújo, dos Santos,H.Lopes , M.Vaz, C.M. Mota Soares & J. Herskovits,
“Identificação de Parâmetros Elásticos e Piezoélectricos em Estruturas Activas do
Tipo Placa:Técnicas de Optimização Clássica Versus Redes Neuronais
Arteficiais”,Ed APMTCA, 31 de Maio-2 de Junho, Lisboa 2004.
2.
Pedro, G., A. Suleman and N. Djilali, “A General Purpose, Modular Computational
Platform for Fluid-Structure Interaction Problems,” 12th Annual Conference of
Computational Fluid Dynamics, Ottawa, ON, May 9-11, 2004.
3.
Gomes, M.A., and A. Suleman, “Spectral Level Set Methodology in MDOMDO”,
45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials
Conference, Palm Springs, CA, April 19-22, 2004.
4.
Caliskan, T., and A. Suleman, “H-inf Design and m Analysis Based Optimal
Mapping of Sensors and Actuators in Flexible Structures,” 10th AIAA/ISSMO
Multidisciplinary Analysis and Optimization Conference, Albany, N.Y., August 31Sept 2, 2004.
5.
Secanell, M., and A. Suleman, “Sequential Optimization Algorithms for
Aerodynamic Shape Optimization,” 10th AIAA/ISSMO Multidisciplinary Analysis
and Optimization Conference, Albany, N.Y., August 31-Sept 2, 2004.
6.
Gomes, M.A., and A. Suleman, “Enhancement of Aircraft Roll Maneuvers Using
the Spectral level Optimization Method,” 10th AIAA/ISSMO Multidisciplinary
Analysis and Optimization Conference, Albany, N.Y., August 31-Sept 2, 2004.
7.
A.L. Araújo, C. M. Mota J. Herskovits, P. Pedersen, “Parameter Estimation in
Active Plate Structures”, Proc. of the Seventh International Conference on
Computational Structures Technology, Ed. B.H.V. Topping and
C.A. Mota
Soares, Civil-Comp Press, Stirling, Scotland, Paper No. 16, 2004.
43
8.
A.L. Araújo, C. M. Mota Soares, J. Herskovits & P. Pedersen, “Parameter
Estimation in Active Plate Structures Using Gradient Optimization and Neural
Networks”, Inverse Problems, Design and Optimization Symposium, Rio de
Janeiro, March 17-19 2004.
9.
A.L. Araújo, H. Lopes, M. Vaz, C. M. Mota Soares and J. Herskovits, “Parameter
Estimation in Active Plate Structures”, Proc.
ICCE/11-Eleventh Annual
International Conference on Composites /Nano Engineering, Ed. David Hui,
University of New Orleans,USA , 2004.
10. Barbarosie ; M.M. Neves: "Metodologia De Projecto De Filtros De Frequência",
Congresso de Métodos Computacionais em Engenharia, Lisboa, 31 de Maio-2 de
Junho, 2004.
11. Pinto Correia , C.M. Mota Soares, C.A. Mota Soares &J. Herskovits , “Análise
Estrutural de Cascas Adaptativas”, Proc. Médodos Numéricos em Engenharia ,
Proc. Ed. APMTAC, 31 de Maio-2 de Junho,Lisboa 2004.
12. Hamid Lankarani, C.S. Koshy, G. Kanetkar, Paulo Flores, J.C.P. Claro and Jorge
Ambrósio, Experimental Study On Multibody Systems With Clearance Joints, in
Proc. of the Second Asian Conference on Multibody Dynamics 2002, Seoul, Korea,
August 2-4, 40-46, 2004.
13. J. Fialho, L. Eça and P. R. Fernandes, “Influence of Material Properties and
Acetabular Fixation on Peak Temperature due to Frictional Heating On Hip
Implants”, 14th Conference of the European Society of Biomechanics, sHertogenbosh, The Netherlands, 4-7 Julho, 2004.
14. J. Fialho, L. Eça and P. R. Fernandes, “Temperature Distribution on Total Hip
Implants due to Frictional Heating: A computational Study on Prosthesis Material
and Acetabular Fixation”, 6th International Symposium on Computer Methods in
Biomechanics, Madrid, Spain, 25-28 Fev., 2004.
15. Fialho, P. R. Fernandes e L. Eça, “Análise da Distribuição de Temperaturas em
Próteses da Anca”, Congresso de Métodos Computacionais em Engenharia, Lisboa,
31 de Maio-2 de Junho, 2004.
16. Folgado, P. R. Fernandes e H. Rodrigues, “Optimização de Topologia com
Condições de Contacto”, Congresso de Métodos Computacionais em Engenharia,
Lisboa, 31 de Maio-2 de Junho, 2004.
17. Folgado, P. R. Fernandes, J. M. Guedes and H. Rodrigues, “Evaluation of Bone
Quality by a Computational Model for Bone Remodeling”, 14th Conference of the
European Society of Biomechanics, s-Hertogenbosh, The Netherlands, 4-7 Julho,
2004.
18. J. Folgado, P. R. Fernandes, e H. Rodrigues, “A material model for topology
optimisation structures with contact conditions”, The Seventh International
Conference on Computational Structures Technology, Lisboa, 7-9 Setembro 2004.
19. J. Viriato dos Santos, C. M. Mota Soares, C.A. Mota Soares & N.M.M.Maia,
“Modelo de Identificação de Dano com Base nas Características Dinâmicas de
Estruturas” Proc. APMTCA, 31 de Maio-2 De Junho, Lisboa 2004.
44
20. J.P. Dias, F. Antunes and R. Corrêa, "Simplified Models for Simulation and Design
of Crashworthy Structures", in Proceedings of the Seventh International Conference
on Computational Structures Technology, B.H.V. Topping and C.A. Mota Soares,
(Editors), Civil-Comp Press, Stirling, United Kingdom, paper 285, 2004.
21. J.P. Dias, “Accidents Involving Motorcycles and Pedestrians in Portugal”, Paper N.
16, ESAR- 1 International Conference on Experts on Accident Research, Hannover,
Germany, September 3 - 4, 2004.
22. João F. Milho, Jorge A.C. Ambrósio and Manuel F.O.S. Pereira, Optimization of
Train Structural Components for Crashworthiness, in Proceedings of ECCOMAS
2004: European Congress on Computational Methods in Applied Sciences and
Engineering (P. Neittaanmäki, T. Rossi, S. Korotov, E. Oñate, J. Périaux, and D.
Knörzer, Eds.), Jyväskylä, Finland, July 24—28, 2004.
23. João Milho, Jorge Ambrósio and Manuel Pereira, Design of Train Crash
Experimental Tests by Optimization Procedures, In Proceedings of the ICRASH
2004, International Crashworthiness Conference, (E.C. Chirwa, Ed.), San
Francisco, California, July 14-16, 2004.
24. João Pombo and Jorge Ambrósio, A Computational Efficient General Wheel-Rail
Contact Detection Method, in Proc. of the Second Asian Conference on Multibody
Dynamics 2002, Seoul, Korea, August 2-4, 435-443 2004.
25. José Simões Moita, Cristovão Mota Soares&Carlos Mota Soares, “Optimização de
Estruturas Laminadas Adaptativas com Controlo Activo”, Proc. Médodos
Numéricos em Engenharia ,Proc. Ed. APMTAC, 31 de Maio –2 de Junho,Lisboa
2004.
26. L. Pinheiro; M.M. Neves: "Sobre a Análise de Sensibilidades em Instabilidade
Elástica Linearizada: Elemento Finito Beam3 Do Ansys®" - Congresso de Métodos
Computacionais em Engenharia, Lisboa, 31 de Maio-2 de Junho, 2004.
27. Maria Augusta Neto, Jorge A.C. Ambrósio and Rogério P. Leal, Composite
Materials in Flexible Multibody Systems, in Proceedings of ECCOMAS 2004:
European Congress on Computational Methods in Applied Sciences and
Engineering (P. Neittaanmäki, T. Rossi, S. Korotov, E. Oñate, J. Périaux, and D.
Knörzer, Eds.), Jyväskylä, Finland, July 24—28, 2004.
28. Miguel Silva and Jorge Ambrósio, Variability of the Contact with the Vehicle
Interiors of Unbelted Occupants, In Proceedings of the ICRASH 2004, International
Crashworthiness Conference, (E.C. Chirwa, Ed.), San Francisco, California, July
14-16, 2004.
29. R. Ruben, J. Folgado e P. R. Fernandes, “Optimização Multi-Objectivo da
Geometria de Próteses da Anca”, Congresso de Métodos Computacionais em
Engenharia, Lisboa, 31 de Maio-2 de Junho, 2004.
30. R.M. Lage, C. M. Mota Soares, C. A. Mota Soares &J. N. Reddy, “Layerwise
Mixed Finite Elements for the Analysis of Piezolaminated Plates”, Proceedings of
MDP-8. Cairo University Conference on Mechanical Design and Production, Cairo
Egypt, January 4-6, 2004.
45
31. R.N. Cadete, J.P. Dias and M.S. Pereira, "Train Crashworthiness Design using
Response Surface Methodology", in Proceedings of the Seventh International
Conference on Computational Structures Technology, B.H.V. Topping and C.A.
Mota Soares, (Editors), Civil-Comp Press, Stirling, United Kingdom, paper 284,
2004.
32. Sampaio, R. P. C., Maia, N. M. M., "On the Detection and Relative Damage
Quantification Indicator", Proceedings of the “2nd European Workshop on
Structural Health Monitoring”, Munique, Germany, July 2004, pp. 757-766.
33. Montalvão, D., Ribeiro, A.M.R., Maia, N.M.M., Silva, J.M.M., "On the estimation
of rotational frequency response functions", Proceedings of ISMA 2004, "Noise and
Vibration Engineering", Leuven, Belgium, September 2004, pp.2771-2785.
34. Fontul, M., Ribeiro, A.M.R., Silva, J.M.M., Maia, N.M.M., "Transmissibility in
Structural Coupling", Proceedings of ISMA 2004, "Noise and Vibration
Engineering", Leuven, Belgium, September 2004, pp.2707-2716.
35. Oliveira, F.V.P., Ribeiro, A.M.R., Maia, N.M.M., Oliveira, C. M. M. S., "A
Laboratory Testing Machine to Measure Apple Firmness", Proceedings of ISMA
2004, "Noise and Vibration Engineering", Leuven, Belgium, September 2004, pp.
1337-1351.
36. Almeida, R.A.B., Urgueira, A.P.V., Maia, N.M.M., " Evaluation of Rigid Body
Properties from Frequency Response Data", Proceedings of ISMA 2004, "Noise
and Vibration Engineering", Leuven, Belgium, September 2004, pp.2409-2423.
37. L.F. Baptista, S.P. Fernandes e J.M.G. Sá da Costa. "Bi-dimensional control with
force tracking control in non-rigid environments". 6th Portuguese Control
Conference - Controlo 2004, 7-9 de Junho de 2004, Universidade do Algarve,
Portugal
38. C. D. Bocaniala, J. Sá da Costa and R. Louro, A Fuzzy Classification Solution for
Fault Diagnosis of Valve Actuators, Proceedings of 7th International Conference on
Knowledge-Based Intelligent Information & Engineering Systems, Oxford, UK,
2003.
39. C. D. Bocaniala and J. Sá da Costa, Tuning the Parameters of a Fuzzy Classifiers
for Fault Diagnosis. Hill-Climbing vs. Genetic Algorithms, Sixth Portuguese
Conference on Automatic Control, 7-9 June, Faro, Portugal, 2004.
40. C. D. Bocaniala, J. Sá da Costa, Tuning the Parameters of a Fuzzy Classifiers for
Fault Diagnosis. Particle Swarm Optimization vs. Genetic Algorithms, 1st
International Conference on Informatics in Control Automation and Robotics, 2528 August, Setubal, Portugal, 2004.
41. C. D. Bocaniala, J. Sá da Costa and V. Palade, Refinement of the Diagnosis Process
Performed with a Fuzzy Classifier, Proceedings of 8th International Conference on
Knowledge-Based Intelligent Information & Engineering Systems, Wellington,
New Zealand, 2004.
46
42. C. D. Bocaniala and J. Sa da Costa (2004). Novel Framework for Using Causal
Models in Distributed Fault Diagnosis, Workshop on Advanced Control and
Diagnosis, 17-18 November, Karlsruhe, Germany. (accepted)
43. J. Borges, Vincent Verdult, Michel Verhaegen, Miguel Ayala Botto, “Separable
least squares for projected gradient identification of composite local linear statespace models'', 16th International Symposium on Mathematical Theory of Networks
and Systems, 11 pages, Leuven, Belgium, 2004.
44. J. R. Caldas Pinto, Pedro Pina, Lourenço Bandeira, Luís Pimentel, Mário Ramalho,
“Underline Removal on Old Documents”, ICIAR 2004, September 29- October 1,
Porto, Portugal, Lectures Notes in Computer Science, LNCS 3211, Springer, 2004,
pp 226-234
45. V. Cortes, J. Azinheira and E.Paiva, “Identification of Lateral Dynamics of Aurora
Airship”, IAV 2004, Lisbon, Jul 2004
46. V. Cortes, J. Azinheira, E.Paiva, B.Faria, J.Ramos, S.Bueno, “Experimental
Identification of Aurora Airship”, IAV 2004, Lisbon, Jul 2004
47. R. Delgado, Gustavo Santos, Carlos Cardeira, Rui Loureiro, Otto Leichsenring,
“Web Based Supervision of Remote Units”, in Proceedings of Controlo 2004, The
Sixth Portuguese Conference on Automatic Control, Faro, Portugal, June 7-9, 2004,
pp. 439-444.
48. R. Delgado, Gustavo Santos, Carlos Cardeira, J. R. C. Pinto, Rui Loureiro, Otto
Leichsenring, “Remote Laboratory for Industrial Automation” in Proceedings of
VIRTUAL-LAB’2004, The 1st International Workshop on e-learning and Virtual
and Remote Laboratories (In conjunction with the International Conference on
Informatics in Control, Automation and Robotics - ICINCO 2004), Setúbal,
Portugal, August 24 - 25, 2004, pp. 28-37.
49. P.A. Fernandes Ferreira, J.R. Caldas Pinto. “A Visual Servoing Architecture using
Predictive Control for a Puma 560 Robot,” , Proceedings of the 1st International
Conference on Informatics in Control, Automation and Robotics (ICINCO), 25-28
August 2004, Setúbal, Portugal, pp. 475-478.
50. J. Figueiredo, J. Sá da Costa. "A Controllable Model for Pancake Resolvers for
Manufacturing Purposes”, Proc. IEEE Intl. Conf. Mechatronics & Robotics 2004,
September 2004, Aachen – Germany
51. J. Figueiredo, J. Sá da Costa. "Analog Rotation Sensors: An Industrial Approach for
Modelling and Simulation”, Proc. 6th Intl. Conf. on Automatic Control - Controlo
2004, June 2004, Faro – Portugal
52. J. Figueiredo, J. Sá da Costa. "A Pro-Active Resolver Model to Cope with
Parameter Variability in the Manufacturing Chain”, Proc. Intl. Conf. on Informatics
in Control, Automation & Robotics - ICINCO 2004, August 2004, Setúbal –
Portugal
53. P. J. Gonçalves, L. F. Mendonça, J. M. Sousa e J. C. Pinto. Fuzzy model based
control applied to image-based visual servoing. Proc. IEEE International
47
Conference on Informatics in Control, Automation and Robotics, ICINCO'2004, pp.
143-150, Setúbal, Portugal, Agosto 2004.
54. P. J. S. Gonçalves, L. F. Mendonça, J. M. Sousa e J. C. Pinto. Improving visual
servoing using fuzzy filters. Proc. IEEE International Conference on Fuzzy
Systems, FUZZ-IEEE'2004, pp. 1185-1190, Budapest, Hungary, Julho 2004.
55. P. J. S. Gonçalves, L. F. Mendonça, J. M. Sousa e J. C. Pinto. Fuzzy filters applied
to path planning visual servoing. Proc. 6th Portuguese Conference on Automatic
Control, Controlo'2004, pp. 363-368, Faro, Portugal, Junho 2004.
56. P. J. S. Gonçalves, L. F. Mendonça, J.M.C. Sousa, and J.R. Caldas Pinto “Image
Recognition Applied to Robot Control Using Fuzzy Modeling” ICIAR 2004,
September 29- October 1, Porto, Portugal, Lectures Notes in Computer Science,
LNCS 3211, Springer, 2004, pp 253-260
57. P. J S. Gonçalves, Caldas Pinto J.R., "Dynamic Position-based Visual Servoing of
Robotic Manipulators", Proceedings of the 35th International Symposium on
Robotics, Paris, France, March 23-26, 2004.
58. A.Lipnickas, Cosmin Danut Bocaniala, José Sa da Costa, Performance analysis for
a New Fuzzy -NN classifier, Proceedings of the Conference “Information
Technology’2004“, Kaunas University of Technology, Kaunas, 2004, January 2829, pp.: 61-68; ISBN 9955-09-588-1
59. A.Lipnickas, J. Sá da Costa, C. D. Bocaniala. “FDI based on two stages classifiers
for faults diagnosis of valve actuators. Application to DAMADICS benchmark.
Proc. 11th Int. Conf. on Power Electronics and Motion Control, EPE-PEMC’04, vol.
3, pp 147-153, September, 2004
60. A.Marciniak, C. D. Bocaniala, R. Louro, J.M.G. Sa da Costa and J. Korbicz, Pattern
recognition approach to fault diagnosis in the DAMADICS benchmark flow control
valve, Proceedings of 5th IFAC Symposium on Fault Detection, Supervision and
Safety of Technical Processes SAFEPROCESS, Washington, USA, 2003.
61. A.Moutinho and J. Azinheira, “Path Control of an Autonomous Airship using
Dynamic Inversion”, IAV 2004, Lisbon, Jul 2004
62. M. D. Ortigueira, J. A. Tenreiro Machado, J. Sá da Costa. “Considerations about the
choice of differintegrator, Proc. IEEE Int. Conf. on Communications – ICC’04, 2024 June, Paris, France.
63. B.S. Ribeiro, J. M. Gil, J. C. Pinto e J. M. Sousa. Ancient word indexing using
fuzzy methods. Proc. 4th International Workshop on Pattern Recognition in
Information Systems, PRIS'2004, pp. 210-215, Porto, Portugal, Abril 2004.
64. B.S. Ribeiro, J. M. Gil, J. C. Pinto e J. M. Sousa. Ancient character recognition
using fuzzy methods. Proc. 4th International Workshop on Pattern Recognition in
Information Systems, PRIS'2004, pp. 98-107, Porto, Portugal, Abril 2004.
65. C.S. Ribeiro, Gil J.M., Caldas Pinto J.R, Sousa J.M.: Ancient document recognition
using fuzzy methods. In: Proceedings of the 4th international Workshop on Pattern
Recognition in Information Systems, Porto, Portugal (2004) 98-107
48
66. P. Rives and J. Azinheira, “Linear Structures Following by an Airship using
Vanishing Point and Horizon Line in a Visual Servoing Scheme”, ICRA 2004, New
Orleans, May 2004
67. J. Sá da Costa, J., Lipnickas, A., Bocaniala, C.D., 2004, FDI based on two stage
classifiers for fault diagnosis of valve actuators. Application to DAMADICS
benchmark, the 11th International Conference EPE-PEMC'2004, 2-4 September,
Riga, Latvia, 2004.
68. D. A. Silva, J. M. C. Sousa, T. A. Runkler e J. Sá da Costa. A multi-agent approach
for supply chain management using ant colony optimization. Proc. of IEEE
International Conference on Systems, Man and Cybernetics, IEEE-SMC 2004, The
Hague, The Netherlands, Outubro 2004.
69. D. A. Silva, J. M. C. Sousa, T. A. Runkler e J. Sá da Costa. Distributed optimization
in supply-chain management using ant colony optimization. Proc. 6th Portuguese
Conference on Automatic Control, Controlo'2004, pp. 540-545, Faro, Portugal,
Junho 2004.
70. M.P. Silva, L. Pina, A. Bemporad, M. Ayala Botto, J. Sá da Costa, “Robust optimal
control of linear hybrid systems: an MLD approach'', 6th Portuguese Conference on
Automatic Control, pp. 208-213, Algarve, Portugal, 2004.
71. J. M. C. Sousa and João R. Caldas Pinto, “Comparison of Intelligent Classification
Techniques Applied to Marble Classification” ICIAR 2004, September 29- October
1, Porto, Portugal, Lectures Notes in Computer Science, LNCS 3211, Springer,
2004, pp 384-390
72. C. Valério, J. Sá da Costa - Digital implementation of non-integer control and its
application to a two-link robotic arm. In European Control Conference 2003.
Cambridge: IEE, 2003.
73. C. Valério, J. Sá da Costa - Optimisation of non-integer order control parameters
for a robotic arm. In 11th International Conference on Advanced Robotics. 387392. Coimbra: ISR, 2003.
74. S. Vieira, J. M. Sousa e F. Durão. Fuzzy modeling of a column flotation process.
Proc. 11th IFAC Symposium on Automation in Mining, Mineral and Metal
Processing, MMM'2004, pp. Session Fr-B1, Nancy, France, Setembro 2004.
75. S. Vieira, J. M. Sousa e F. Durão. Combination of fuzzy identification algorithms
applied to a column flotation process. Proc. IEEE International Conference on
Fuzzy Systems, FUZZ-IEEE'2004, pp. 421-426, Budapest, Hungary, Julho 2004.
76. J. Weinholtz, R. Loureiro, C. Cardeira e J. M. Sousa. Automatic creation of
simulation models for flow assembly lines. Proc. 6th Portuguese Conference on
Automatic Control, Controlo'2004, pp. 67-72, Faro, Portugal, Junho 2004.
77. Rosa P. A. R., Rodrigues J. M. C. e Martins P. A. F., “Invert-Forming of ThinWalled Tubes Using a Die”, 2nd. International Conference on Tribology in
Manufacturing Processes, ICTMP2004, Nyborg, Denmark, 2004.
49
78. Shimizu I., Martins P. A. F., Bay N., Andreasen J. L. e Bech J. I., “Influence of
Lubricant Pocket Geometry upon Lubrication Mechanisms on Tool-Workpiece
Interfaces in Metal Forming”, 2nd. International Conference on Tribology in
Manufacturing Processes, ICTMP2004, Nyborg, Denmark, 2004
79. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Simulação Numérica e
Experimental do Forjamento a Frio de Cruzetas”, VI Congresso de Métodos
Computacionais em Engenharia, Lisboa, 2004.
80. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Cold Forging of a Spider:
Experimental and Theoretical Investigation”, ECCOMAS 2004 – IV European
Congress on Computational Methods in Applied Sciences and Engineering,
Finland, 2004.
81. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Numerical and experimental
analysis of the closed-die forging of Aluminum spiders”, Metal Forming 2004 - The
10th International Conference on Metal Forming, Akademia Gorniczo-Hutnicza,
Krakow, Poland, 2004.
82. Brito A. M.G., Rosa P. A. R., Rodrigues J. M. C., Schaeffer L. e Martins P. A. F.,
“Conformação de Tubos de Parede Fina em Matriz Aberta Através de Compressão
Axial”, 59º Congresso Anual da Associação Brasileira de Metalurgia e Materiais,
São Paulo, Brasil, 2004.
83. Rosa P. A. R., C. S. Li, Rodrigues J. M. C. e Martins P. A. F., Numerical and
Experimental Simulation of the Invert Forming of Thin-Walled Tubes Using a Die,
Proceedings of IACM/APCOM’04 - Sixth World Congress on Computational
Mechanics, Beijing, China, 2004.
84. Elsa Henriques, Paulo Peças, “Rapid Moulds Manufacturing as a Competitive
Opportunity”, aceite para apresentação na Conferência Internacional RPD2004 –
“Rapid Product Development 2004; Agile Development for Productivity", Semana
dos Moldes, Marinha Grande, Portugal, 2004.
85. Paulo Peças, Elsa Henriques, ”Organizational and Manufacturing Best-Practices to
Improve Mould Making Competitiveness”, aceite para apresentação na Conferência
Internacional RPD2004 – “Rapid Product Development 2004; Agile Development
for Productivity", Semana dos Moldes, Marinha Grande, Portugal, 2004.
86. Ana Espada, Pedro Pinto, Elsa Henriques, “Modular Platform Design of Railway
Vehicle Components”, aceite para apresentação na Conferência Internacional
RPD2004 – “Rapid Product Development 2004; Agile Development for
Productivity", Semana dos Moldes, Marinha Grande, Portugal, 2004.
87. Iordachescu, D., Quintino, “Survey on Innovative Brazing Technologies”, Welding
and Joining 2005 - Frontiers of Materials Joining, Israel, Janeiro 2005.
88. C. A. Boynard, J. M. Albuquerque, A. C. Cruz, L. Quintino* and M. VRHOVAC,
“Parametric Analysis of Non-Destructive Evaluation (NDE) by Time of Flight
Diffraction (TOFD)”, “HIDA 4 Conference: Probabilistic Life/Crack Assessment
and Preventive Maintenance in Industrial Plant”, Cambridge, UK, Setembro, 2004
50
89. Iordachescu, D., Quintino, “Extreme Procedures for MIG Brazing of 0.8mm Zinc
Coated Automotive Plates”, “57th Annual Assembly of IIW - International
Conference of the Japan Welding Engineering Society”, Osaka, Japão, Julho 2004.
90. Danut Iordachescu, Luisa Quintino, “Contributions to the Classification of the
Metal Transfer in Arc Welding”, IIW Doc. No XII-1798-04, COM XII, “57th
Annual Assembly of IIW - International Conference of the Japan Welding
Engineering Society”, Osaka, Japão, Julho 2004.
91. Costa, L. Quintino, “Dissimilar Laser Weld joint – Contribution to Residual Stress
Analysis", EUROJOIN 5, pp. V15-1/11-V15-11/11, Viena, Áustria, Maio 2004.
92. D. Iordachescu, L. Quintino, J. Duarte, “Metal Transfer Modes in Automated MIG
Brazing", EWF International Conference EUROJOIN 5, pp. V34-1/8-V34-8/8,
Viena, Áustria, Maio 2004.
93. L. Quintino, Ferraz R., “International Education, Qualification and Certification
Systems in Welding", “Welding in Maritime Engineering”, Hrvatska - Croacia,
Maio 2004.
94. P. Vilaça, J.P. Santos, A. Góis, L. Quintino, “Tailored-Blanks Welded by Friction
Stir Welding and Fusion Processes", EUROJOIN 5, pp. V12-1/11-V12-11/11,
Vienna - Austria, Maio 2004.
95. Boynard, L. Quintino, M. Vrohavac, J.M. Albuquerque, “Comparisation of Flaw
Sizing Capabilities of NDE Techniques”, 4th International HIDA Conference &
Workshop, Universidade de Cambridge, Reino Unido, 2004.
96. Luís Maltez"STP's in Portugal: Good and not so Good Experiences, Reasons
Behind and Lessons to be Learned", XXI IASP World Conference on Science and
Technology Parks, Bergamo, Italy, September, 2004
97. Alves L. M. M., Rodrigues J. M. C. e Martins P. A. F.,”Proposta de um novo
critério de plasticidade para materiais sinterizados”, 3º Cobef – Congresso
Brasileiro de Engenharia de Fabricação, Joinville, Brasil, 2004.
98. Barreiros, A.: "Probability Density Functions for Stochastic Linear Programming",
International Conference on Computing, Communications and Control
Technologies (CCCT'04), The University of Texas at Austin and The International
Institute of Informatics and Systemics (IIIS), Austin, Texas, USA August 14-17,
2004.
99. Barreiros, A.: "Modelling turbulent non-premixed flames using a reactant plan
approach", European Congress on Computational Methods in Applied Sciences and
Engineering (ECCOMAS 2004), P. Neittaanmäki, T. Rossi, S. Korotov, E. Oñate, J.
Périaux, and D. Knörzer (eds.), Finland, Jyväskylä, 24-28 July 2004.
100. Cunha, P. : 54th General Assembly; “Development of a Productive Service Module
Based on a Life Cycle Perspective of Maintenance Issues” Krakow, Polónia,
Agosto 2004.
101. Cunha, P :CIRP Paris Meeting “An Evaluation Method to Support Planning Tasks
by Reduced Data Sets”, Paris, França, .Janeiro 2004.
51
102. Cunha, P :Seminário “Logística: Relevância na eficácia dos processos industriais”,
que contará com a presença, entre outros, do Prof.H.P. Wiendahl da Universidade
de Hannover , a realizar em Dezembro de 2004, na EST Setúbal.
103. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, “An inverse method for turbomachinery
cascades of blades - investigation of the existence and uniqueness of solution”.
Presented at the Fifth International Conference on Advances in Fluid Mechanics,
WIT, Lisbon.
104. J. C. C. Henriques, L. M. C. Gato, “Computation of the NTUA/LTT compressor
annular-cascade flow using the multidimensional upwind residual distribution
method”. Presented at the Fifth International Conference on Advances in Fluid
Mechanics, WIT, Lisbon.
105. Azevedo, I., A. Simões, T. Sousa, T. Domingos (2004). Financing public goods in
an endowment economy with status effects. Biennial Conference of the International Society for Ecological Economics, Montréal, Canada, 11-14 Julho.
http://www.iseemontreal2004.com/papers/8253_AzevedoI.pdf
106. Domingos, T., A. Simões (2004). EXTENSITY – Environmental and Sustainability
Management Systems in Extensive Agriculture. Proceedings of the International
Congress: Rural Ecosystems and Biological Richness, 30th October to 1st
November, Liga para a Protecção da Natureza, Castro Verde, Portugal.
107. Mota, R., T. Domingos (2004). Optimal ecosystem management with structural
dynamics. Proceedings of the Monte Verità Conference on Sustainable Resource
Use and Economic Dynamics – SURED, 7-10 June 2004, Monte Veritá,
Suiça.http://www.wif.ethz.ch/sured/programme/sured_mota_domingos.pdf
108. Mota, R., T. Domingos (2004). Ecosystem management with structural dynamics.
8th Biennial Conference of the International Society for Ecological Economics,
Montréal,
Canada,
11-14
Julho.
http://iseemontreal2004.com/papers/
8271_MotaR.doc
109. Palma, J., T. Sousa, G. Pita, J. Domingos (2004). In C. Cantero-Martinéz, D.
Gabiña (eds.), Mediterranean rainfed agriculture: Strategies for sustainability,
Options Méditerranéennes: Série A – Seminaires Méditerranéens, No. 60, pp. 9195.
110. Rodrigues, J., F. Schneider, S. Giljum, T. Domingos, F. Hinterberger (2004).
Designing a fair indicator of environmental pressure. 8th Biennial Conference of the
International Society for Ecological Economics, Montréal, Canada, 11-14
Julho.http://iseemontreal2004.com/papers/8175_DiasRodriguesJF.pdf
111. Simões, A., T. Domingos, F. Hinterberger (2004). Sustainable consumption: a
mixed instrument for information and taxation. Proceedings of I Congreso AERNA
– Asociación Hispano-Portuguesa de Economía de los Recursos Naturales y
Ambientales, 18-19 June, Vigo, Espanha.http://www.efimera.com/clientes/
aerna/trabajos/84/ Simoes.pdf
112. J. M. F. Trindade and J, C. F. Pereira (2004). “Parallel-in-time Simulation of 2D
Laminar Unsteady Flow Around a Square Obstacle”. ASME Heat Transfer/ Fluids
52
Engineering Summer Conference, Charlotte, North Carolina, USA, 11-15 Julho,
paper 56796
113. J. M. F. Trindade and J, C. F. Pereira (2004). “Parallel-in-time for the FiniteVolume Solution of Incompressible Unsteady Navier-Stokes”. ECCOMAS’04,
Jyväskylä, Finlândia, 24-28 Julho, paper 1027.
114. Mendes, P.J., Sousa, J.M.M., Pinto, J.F. – “Measurements of the Resistance to Air
Passage in Dry-Powder-Inhalers”, European Federation for Pharmaceutical
Sciences (EUFEPS) – New Safe Medicines, Towards Mechanistic Prediction, em
Bruxelas (Bélgica), 17-20 de Outubro de 2004 (poster).
115. Sousa, J.M.M. – “On the Application of Transitional Flow Models in Airfoil
Computations Using Coupled Navier-Stokes and eN Transition Prediction
Methods”, Twenty-Fourth Congress of the International Council of the
Aeronautical Sciences, em Yokohama (Japão), 29 de Agosto - 3 de Setembro de
2004.
116. Melo, J., Yadav, A., Sousa, J.M.M., Costa, M., Coelho, P.J., Levy, Y. –
“Experimental and Numerical Investigation of a Flameless Oxidation Combustor”,
Twenty-First International Congress of Theoretical and Applied Mechanics, em
Varsóvia (Polónia), 15-21 de Agosto de 2004.
117. Mendes, P.J., Pinto, J.F., Sousa, J.M.M. – “Visualization and Measurement of the
Flow Through a Standard Analyser Used for Quality Control of Medical Aerosol
Products”, Eleventh International Symposium on Flow Visualization, em NotreDame (EUA), 9-12 de Agosto de 2004.
118. Sousa, J.M.M. – “On the Stability of the Flow Through a Spherical Bulge in a 90Degree Asymmetrical Bend”, International Conference on Computational &
Experimental Engineering and Sciences, na Madeira (Portugal), 26-29 de Julho de
2004.
119. Melo, M.J., Sousa, J.M.M., Costa, M., Levy, Y. – “Experimental Investigation of a
New Combustor Model for Gas Turbines”, Twelfth International Symposium on
Applications of Laser Techniques to Fluid Mechanics, em Lisboa (Portugal), 12-15
de Julho de 2004.
120. Mendes, P.J., Sousa, J.M.M., Pinto, J.F. – “Evaluation of the Size of Particles in
Dry Powder Inhalers with a Twin-Impinger and a Time-of-Flight Equipment”,
International Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical
Technology, em Nuremberga (Alemanha), 15-18 de Março de 2004.
121. Carlos B. da Silva and Jose C. F. Pereira, “On the influence of SGS models upon
the vortices computed from LES”, Advances in Turbulence X, Edited by C.
Dopazo,
122. Carlos B Silva, “Influence of the mean field upon passive scalar anisotrophy in
turbulent plane jets, “Advances in Turbulence X, Edited by C. Dopazo
123. Mateus, P., Santos, A., Coelho. P. J. And Costa, M. (2004). Experimental and
computational study of lifted turbulent diffusion flames. Proceedings of the 3rd
53
International Symposium on Advances in Computational Heat Transfer, Noruega,
19-24 April.
124. Melo, M. J., Sousa, J. M. M., Costa, M. And Levy, Y. (2004). Experimental
investigation of a new combustor model for gas turbines. Proceedings of the 12th
International Symposium on Application of Laser Techniques to Fluid Mechanics,
Lisboa, Portugal, 12-15 July.
125. Saario, A., Rebola, A., Coelho, P. J., Costa, M. And Oksanen, A. (2004). Heavy
fuel oil combustion in a cylindrical laboratory furnace: measurements and
modeling. Proceedings of the European Congress on Computational Methods in
Applied Sciences and Engineering – ECCOMAS 2004, P. Neittaanmäki, T. Rossi,
S. Korotov, E. Oñate, J. Périaux, and D. Knörzer (eds.), Jyväskylä, Filândia, 24-28
July.
126. Melo, J., Yadav, A., Sousa, J. M. M., Costa, M., Coelho, P. J. and Levy, Y. (2004).
Experimental and numerical investigation of a flameless oxidation combustor.
Proceedings of the 21st International Congress on Theoretical and Applied
Mechanics, Varsóvia, Polónia, 15-21 August.
127. Casaca, C. And Costa, M. (2004). Importance of the reburn fuel on the reduction of
NOx emissions from a laboratory furnace. Proceedings of the 10th Brazilian
Congress of Thermal Sciences and Engineering – ENCIT 2004, Rio de Janeiro,
Brazil, 29 November-3 December.
128. Optimization of ladder-type spacers for nanofiltration and reverse osmosis spiralwound modules by computational fluid dynamics, V. Geraldes, V. Semião e M.N.
de Pinho, European Symposium on Computer-Aided Process Engineering, Lisboa,
2004.
129. Modelação do escoamento e da transferência de massa na ultrafiltração de soluções
aquosas de lisozima e sal, V. Magueijo, V. Semião e M.N. de Pinho, Congresso de
Métodos Computacionais em Engenharia - CMCE (incorporando o VIII Congresso
Nacional de Mecânica Aplicada Computacional e o VI Congreso de Métodos
Numéricoc en Ingenieria), Lisboa, 2004.
130. A influência da sucção no desenvolvimento da camada limite em problemas de
ultrafiltração, V. Magueijo, V. Semião e M.N. de Pinho, Congresso de Métodos
Computacionais em Engenharia - CMCE (incorporando o VIII Congresso Nacional
de Mecânica Aplicada Computacional e o VI Congreso de Métodos Numéricoc en
Ingenieria), Lisboa, 2004.
131. G. Tavares, Z. Zsigraiová, V. Semião, M. da G. Carvalho Municipal Solid Waste
Valorisation – Energy for Isolated Communities, Proceedings of the International
Conference on New and Renewable Energy Technologies for Sustainable
Development, “Renewables 2004”, Évora, Portugal, 2004
132. P.J. Coelho, “Fundamentals of a New Method for the Solution of the Radiative
Transfer Equation”, 3rd Int. Symposium on Advances in Computational Heat
Transfer, Norway, 19-24 April (2004).
54
133. P. Mateus, A. Santos, P.J. Coelho and M. Costa, “Experimental and Computational
Study of Lifted Turbulent Diffusion Flames”, 3rd Int. Symposium on Advances in
Computational Heat Transfer, Norway, 19-24 April (2004).
134. M. Baburic, A. Raulot, P.J. Coelho and N. Duic, “Application of the Conservative
Discrete Transfer Radiation Method to a Furnace with Complex Geometry”, 3rd Int.
Symposium on Advances in Computational Heat Transfer, Norway, 19-24 April
(2004).
135. P.J. Coelho, “A Hybrid Finite Volume / Finite Element Discretization Method for
the Solution of the Radiative Heat Transfer Equation”, 4th International Symposium
on Radiative Transfer, Istanbul, Turkey, 20-25 June (2004).
136. Saario, A. Rebola, P.J. Coelho, M. Costa and A. Oksanen, “Heavy Fuel Oil
Combustion in a Cylindrical Laboratory Furnace: Measurements and Modeling”,
Engineering – ECCOMAS, Jyväskylä, Finland, 24-28 July (2004).
137. J. Melo, A. Yadav, J.M.M. Sousa, M. Costa, P.J. Coelho and Y. Levy,
“Experimental and Numerical Investigation of a Flameless Oxidation Combustor”,
21st Int. Congress on Theoretical and Applied Mechanics, Varsaw, Poland,15-21
August (2004).
138. D. Farinha and P.J. Coelho, “Numerical Simulation of the Flow Field in the Kitchen
of a Residential Building with Natural Ventilation”, 9th International Conference on
Air Distribution in Rooms – Roomvent, Coimbra, 5-8 September (2004).
139. Neven Duić, Maria Lerer, Maria Graça Carvalho, Increasing the supply of
renewable energy sources in island energy systems, Proceedings of ENERGEX 10th International Energy Forum 2004 "Energy & Society", Lisbon, 330-337 (2004)
140. Mario Baburić, Alexandre Raulot, Pedro J. Coelho, Neven Duić, Application of the
conservative discrete transfer radiation method to a furnace with complex geometry,
CD Proceedings of a Symposium organised by the International Centre for Heat and
Mass Transfer, Kirkenes-Bergen (2004)
141. Mario Baburić, Daniel Rolph Schneider, Neven Duić, Branislav Basara, Peter
Priesching, Reinhard Tatschl, Steady laminar flamelet concept and hybrid
turbulence modelling strategy applied on numerical simulation of a turbulent
piloted jet diffusion flame, Proceedings 2nd International Workshop on Trends In
Numerical And Physical Modelling Of Turbulent Processes In Gas Turbine
Combustors (And Automotive Engines), Heidelberg, Germany, 45-51 (2004)
142. Maria Lerer, Neven Duić, Luis Manuel Alves, Maria Graça Carvalho, H2RES,
Energy Planning Tool for Increasing the Penetration of Renewable Energy Sources
in Island Energy Supply, CD Proceedings of the International Conference on New
and Renewable Energy Technologies for Sustainable Development, Lisbon (2004)
143. HySociety – A project to analyse and remove the hydrogen barriers into European
society. Rei Fernandes, Harm Jeeninga, Antonio Mattucci and Martin Wietschel.
Presented at “H2-age : When, Where, Why” Pisa May 16-19, 2004.
55
144. Abstract for poster presentation at “GHGT7 7th International Conference on
Greenhouse Gas Control Technologies” 5th – 9th September 2004, Vancouver,
Canada.
145. Fengzhen Chen, María Yetano Roche, T. R. C. Fernandes, Maria da Graça
Carvalho. Analysis of barriers to the hydrogen society in EU vs emerging
economies. Proceedings of the International Conference on New and Renewable
Energy Technologies for Sustainable Development, 28 June-1 July 2004, Évora,
Portugal.
146. Fengzhen Chen, T. R. C. Fernandes, María Yetano Roche, Maria da Graça
Carvalho. Challenges to the use of Hydrogen as an energy carrier in the EU vs
Transition Economies. Proceedings of The 10th International Energy Conference on
Energy & Society, 3–6 May 2004, Lisbon, Portugal.
147. M. C. Coelho, T. L. Farias and N. M. Rouphail, Assessing Traffic and Emission
Impacts of Manual and Electronic Toll Facilities, presented at 13th International
Scientific Symposium Transport and Air Pollution 2004, Boulder (Colorado, EUA),
September 2004
148. Simões, A. M., Farias, T. L. and Quenino, J. H., Blue Line, a New Bus System:
Application to a Case Study in Évora City, Portugal, presented at the XIII
Panamerican Conference, Traffic & Transportation Engineering 26 – 29 September
2004, Albany, New York.
149. Simões, A. M., Lages, P., Farias, T. L. and Águas, M. N., Energy Audit
Methodology for Urban Bus Fleets: Application to a Case Study in Funchal,
Madeira Island, presented at the XIII Panamerican Conference, Traffic &
Transportation Engineering 26 – 29 September 2004, Albany, New York.
150. Gonçalves, G. A. and Farias, T. L., Operation of Hydrogen Fuel Cell Urban Buses
in the City of Porto, presented at the XIII Panamerican Conference Traffic &
Transportation Engineering 26 – 29 September 2004, Albany, New York.
151. Coelho, M. C., Farias, T. L. and Rouphail, N. M., Measuring and Modelling Traffic
and Emission Impacts of Toll Facilities, presented at 13th International Scientific
Symposium Transport and Air Pollution 2004, (Colorado, EUA), 13 – 15 de
September de 2004.
152. Simões, A. M., Farias, T. L. and Quenino, J. H., Energy Efficiency And GHG
Reduction In A Park & Ride Bus Line: Application To A Case Study In Évora City,
Portugal, presented at the International Conference on New and Renewable Energy
Technologies for Sustainable Development, 28 June - 1 July 2004, Évora, Portugal.
153. Simões, A. M., Lages, P., Farias, T. L. and Águas, M. N., Green House Gases
Emission Reduction In An Urban Bus Fleet: Application To A Case Study In
Funchal, Madeira Island, presented at the International Conference on New and
Renewable Energy Technologies for Sustainable Development, 28 June - 1 July
2004, Évora, Portugal.
154. Gonçalves, G. A., Farias, T. L., Teixeira, R. and Silva, A., Hydrogen Infrastructure
and Fuel Cell Urban Buses In The City Of Oporto, presented at Renewables 2004 -
56
New and Renewable Energy Technologies for Sustainable Development, Évora,
Portugal, 28 June - 1 July 2004.
155. Gonçalves, G. A., Farias, T. L., Teixeira, R. and Silva, A., Hydrogen Fuel Cell
Urban Buses Operating In The City Of Oporto, presented at Renewables 2004 New and Renewable Energy Technologies for Sustainable Development, Évora,
Portugal, 28 June - 1 July 2004.
156. Calhau, K.R., Gonçalves, G.A., Farias, T.L. Environmental Impact Of Hydrogen In
Urban Transports, presented at Renewables 2004 - New and Renewable Energy
Technologies for Sustainable Development, Évora, Portugal, 28 June - 1 July 2004.
157. Silva, C. M., Farias, T. L. and Lopes, J. M. C. Mendes, IST, Portugal “Cold Start,
Part Warm Start and Warm Up Simulation of Vehicles in Ecogest”; FISITA World
Automotive Congress, 23 a 27 de May 2004, Barcelona.
158. Calhau, K.R., Gonçalves, G.A.*, Farias, T.L., Numerical Study Of The
Environmental Impact Of Hydrogen Fuel Cell Urban Buses In The City Of Oporto,
2004 European ELE-DRIVE Transportation Conference, 17 - 20 de March 2004,
Estoril, Portugal.
159. Gonçalves, G. A., Farias, T. L., Teixeira, R. and Silva, A., Hydrogen Fuel Cell
Urban Buses Operating In The City Of Oporto, 2004 European ELE-DRIVE
Transportation Conference, 17 a 20 de March 2004, Estoril, Portugal.
160. M. C. Coelho, T. L. Farias and N. M. Rouphail, “Measuring and Modelling
Emission Effects for toll Facilities”, accepted for presentation at 84th Annual
Meeting of the Transportation Research Board, Washington D.C., 9-13 January
2005.
161. Teixeira, M. A. Babassu – A new Approach for an Ancient Brazilian Biomass.
Proceedings: RENEWABLES 2004 – International conference on New and
Renewables Energy Technologies for Sustainable Development Évora (Portugal):
IST - Research Group on Energy and Sustainable Development, 28th June to 1st of
July 2004, Resume and CD (file:/Papers/01.2_M.Teixeira.doc).
162. Ambrósio, Jorge and Pereira, Manuel, Desenvolvimento Recentes no Cálculo
Automático de Sistemas Mecânicos: Teoria e Aplicação, in Proc. Of the VI
Congresso Ibero-Americano de Engenharia Mecânica, Coimbra, Portugal, 16-18 de
Outubro de 2003.
163. Antos, Pavel and Ambrósio, Jorge, A Control Strategy Of A Vehicle Multibody
Model For Trajectory Tracking, in Proceedings of ECCOMAS Thematic
Conference on Advances in Computational Multibody Dynamics 2003, (J.
Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
164. Araújo, A. L., Mota Soares, C. M., Herskovits, J., Pedersen, P., “Gradient
Optimization Applied to the Identification of Mechanical and Piezoelectric
Properties of Active Plate Structures”, 5th World Congress on Structural and
Multidisciplinary Optimization, Lido di Jesolo, Venice, Italy, May 12-23, 2003.
57
165. Bumpus, S., and Suleman, A., “Experimental Evaluation of Two-Phase Composite
Structural Properties,” 19th Canadian Congress of Applied Mechanics CANCAM
2003, The University of Calgary, Calgary, AB, June 1-6, 2003.
166. Caliskan, T., and Suleman, A., “Optimal Mapping of Actuators and Sensors in
Flexible Structures,” CANSMART 2003, Montreal, QC, October, 2003.
167. Dias, J. P. e Pereira, M. S., ”Multicriteria Optimization of Train Structures for
Crashworthiness”, ECCOMAS Thematic Conference Multibody 2003 Advances in
Computational Multibody Dynamics, Artigo editado por J. Ambrósio em CD-ROM,
Instituto Superior Técnico, Lisbon, Portugal July 1-4, 2003.
168. Dias, J. P. e Pereira, M. S., ”Optimization of Multibody Systems with Application
to the Design of Train Structures for Crashworthiness”, in EUROMECH 442
Computer-Aided-Optimization of Mechanical Systems, University of ErlangenNuremberg, 23-27 Fevereiro 2003, Alemanha.
169. Dias, J. P., Corrêa, R. e Antunes, F., “Crashworthiness Optimization of Train
Structures with Evolutionary Algorithms”, EUROGEN 2003 Evolutionary Methods
for Design, Optimisation and Control, Abstract pág. 83 artigo completo em CDROM, Editado por G. Bugeda, J.-A. Désidéri, J. Périaux, M. Schoenauer and G.
Winter, CIMNE, Barcelona, Spain, 15-17 September, 2003.
170. Dimitrovová, Z., Advani, S.G., “Free Boundary Viscous Flows at Micro and
Mesolevel during Liquid Composites Molding Process”, CD de comunicações e
Acta do 14th International Conference on Composites Materials, pp. 598-599, 1418 de Julho, 2003, San Diego, California, EUA.
171. Dimitrovová, Z., Advani, S.G., “Numerical Simulation of Free Boundary Viscous
Flows at all Length Scales of LCM Process”, CD de comunicações do 3th
International Conference on Computational & Experimental Engineering and
Sciences, 24-29 de Julho, 2003, Corfu, Grécia.
172. Fernandes, P. R., Folgado, J., Jacobs, C., Pellegrini, V. and Rodrigues, H.,
“Numerical Analysis on Bone Remodeling and Bone Ingrowth in Cementless Total
Hip Arthroplasty”, International Congress on Computational Bioengineering,
Zaragoza, Spain, Vol. 2, pp. 520-529. 2003.
173. Fernandes, P. R., Ruben, R. B., “Shape Optimization of a Cementless Hip Stem”, in
Simulation in Biomedicine V, Z.M. Arnez, C.A. Brebbia, F. Solina e V. Stankovski
(Eds.), pp. 333-342, proceedings of Fifth Int. Conf. on Simulation in Biomedicine,
Ljubljana, Eslovénia, 2003.
174. Flores, P., Lankarani, H.M., Ambrósio, J. and Claro, J.C.P., Dynamic Behavior of a
Revolute Joint in Multibody Mechanical Systems, in Proceedings of DETC’03
ASME 2003 Design Engineering Technical Conferences and Computer and
Information in Engineering Conference, paper DETC2003/VIB-48853, Chicago,
Illinois, USA, September 2-6, 2003.
175. Flores, P., Lankarani, H.M., Ambrósio, J. and Claro, J.C.P., Modeling Lubricated
Revolute Joints in Multibody Mechanical Systems, in Proceedings of DETC’03
ASME 2003 Design Engineering Technical Conferences and Computer and
58
Information in Engineering Conference, paper DETC2003/VIB-48854, Chicago,
Illinois, USA, September 2-6, 2003.
176. Flores, Paulo, Ambrósio, Jorge and Claro, J. Pimenta, Dynamic Analysis For Planar
Multibody Mechanical Systems With Real Joints, in Proceedings of ECCOMAS
Thematic Conference on Advances in Computational Multibody Dynamics 2003,
(J. Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
177. Gonçalves, João and Ambrósio, J., Modeling Optimal comfort response of road
vehicles using flexible multibody dynamics, in Proceedings of DETC’03 ASME
2003 Design Engineering Technical Conferences and Computer and Information in
Engineering Conference, paper DETC2003/VIB-48350, Chicago, Illinois, USA,
September 2-6, 2003.
178. Gonçalves, João and Ambrósio, Jorge, Handling Improvement Of Road Vehicles
Using Optimization Of Flexible Multibody Models, in Proceedings of ECCOMAS
Thematic Conference on Advances in Computational Multibody Dynamics 2003,
(J. Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
179. Herskovits, J., Mappa, P., Mota Soares, C. M., “FAIPA-MDO, A Mathematical
Programming Algorithm for Multidisciplinary Design Optimization”, 5th World
Congress on Structural and Multidisciplinary Optimization, Lido di Jesolo, Venice,
Italy, May 12-23, 2003.
180. J.L.T. Santos, M. De Freitas, B. Li and T.P. Trigo “Fatigue Assessment of
Mechanical Components under Complex Multiaxial Loading”, Biaxial/Multiaxial
Fatigue, ESIS STP 31, European Structural Integrity Society, edited by A.
Carpinteri, M. de Freitas and A. Spagnoli, pp.463-482., 2003.
181. Kermani, A. M., and Suleman, A., “A Study of the Internal Flow Structure in a
Cyclone Separator,” 19th Canadian Congress of Applied Mechanics CANCAM
182. Lage, R. Garcia, Mota Soares, C. M., Mota Soares, C. A., Reddy, J. N., “Mixed
Layerwise Finite Element Model for the Free Vibration Analysis of Piezolaminated
Plate Structures”, Proceedings ICCE/10 – Tenth Annual International Conference
on Composites/Nano Engineering, ed. David Hui, University of New Orleans, Dept.
Mech. Eng., New Orleans, USA, pp. 375-376, 2003.
183. M. Pereira, Pedro Barros, P. Jumin, Passive Safety Concepts for Periurban trams,
4th Symposium on Crashworthiness of Rail Vehicles, Berlin, Germany, 2003.
184. Madeira, J. F. Aguilar, Rodrigues, H. e Pina, Heitor, “Chromosome Repairing in
GeneticMethods for Multi-Objective Topology Optimization Of Structures with an
EqualityConstraint on Volume” , Fifth World Congress on Structural and
MultidisciplinaryOptimization, WCSMO5- Lido di Jesolo- Venice 2003.
185. Milho, João, Ambrósio, Jorge and Pereira, Manuel, Tool For Two Dimensional
Crashworthiness Analysis Of Trains With Overriding Effects, in Proceedings of the
International Crashworthiness and Design Symposium 2003 (P. Drazetic, Ed), Lille,
France, 3-4 December, 2003
59
186. Moita, José Simões, Mota Soares, Cristóvão M., Mota Soares, Carlos A., “Finite
Element Model for Active Control of Adaptive Laminated Structures”, CILAMCE
XXIV, XXIV Iberian Latin-American Congress on Computational Methods in
Engineering, Ouro Preto, Brasil, 29-31 Outubro 2003.
187. Neto, Maria Augusta, Ambrósio, Jorge A.C., Flexible Multibody Systems Models
Using Composite Materials Components, in Computational Methods in Engineering
and Science (V.P. Lu, L.N. Lamas, Y.-P. Li, K.M. Mok, Eds), A.A. Balkema
Publishers, Lisse, The Netherlands, (Proc. of EPMESC IX - The 9th International
Conference on Enhancement and Promotion of Computational Methods in
Engineering and Science, Macau, China, 25-28 November de 2003), 425-433, 2003.
188. Neto, Maria Augusta, Ambrósio, Jorge, Lea,l Rogério Pereira, Flexible Multibody
Systems Models Using Composite Materials Components, in Proceedings of
ECCOMAS Thematic Conference on Advances in Computational Multibody
Dynamics 2003, (J. Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
189. Neves, M.M. : "On Bloch Wave Analysis of Periodic Structures and its Potential for
Material Optimization" David Hui Ed., Proceedings of ICCE-10, New Orleans,
USA, July 20-26, 2003, pp. 515-516 (2003).
190. Neves, M.M., Rodrigues, H.C., Guedes, J.M., Sigmund, O. and Bendsøe, M.P.:
"Topology Optimization of Structures or Periodic Solids with Linearized Elastic
Buckling Criterion”, Mini-symposium title: Structural optimization - multiphysics
problems in shape and topology design, organized by Martin Bendsøe and
Alejandro Diaz, 7th US National Congress on Computational Mechanics,
Albuquerque, New Mexico, USA, July 27-31, 2003
191. Ng, E., and Suleman, A., “Effective Thermo-Elastic Properties of n-phase Hybrid
Composites using Eshelby-Mori-Tanaka Theory,” 19th Canadian Congress of
Applied Mechanics CANCAM 2003, The University of Calgary, Calgary, AB, June
1-6, 2003.
192. Pedersen, Sine, Hansen, John, Ambrósio, Jorge, A Roller Chain Drive Model
Including Contact With Guide-Bars, in Proceedings of ECCOMAS Thematic
Conference on Advances in Computational Multibody Dynamics 2003, (J.
Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
193. Pedro G., Suleman, A. and Djilali, N. , “Flapping hydrofoil performance at low
Reynolds numbers, CFD 2003,” The 11th Annual Conference of the CFD Society
of Canada,Vancouver,BC, May 28-30, 2003.
194. Pereira, Cândida, Pedersen, Sine, Ramalho, A, Ambrósio, J., Comportamento
Dinâmico de Transmissões por Corrente Estudo Numérico e Experimental, in Proc.
Of the VI Congresso Ibero-Americano de Engenharia Mecânica, Coimbra, Portugal,
16-18 de Outubro de 2003.
195. Pombo, João and Ambrósio, Jorge, A Wheel-Rail Contact Model For Rail Guided
Vehicles Dynamics, in Proceedings of ECCOMAS Thematic Conference on
Advances in Computational Multibody Dynamics 2003, (J. Ambrósio, Ed.), Lisbon,
Portugal, July 1-4, 2003.
60
196. Relvas, A., and Suleman, A., “Fluid-Structure Interaction Modelling of Nonlinear
Aeroelastic Structures,” 19th Canadian Congress of Applied Mechanics CANCAM
197. Rodrigues, H. C., Folgado, J. e Fernandes, P. R., “A Topology Optimization Model
to Simulate Bone Remodelling Around Hip Prostheses”, Seventh U.S. National
Congress on Computational Mechanics, Albuquerque, USA, pp. 896, 2003.
198. Ruben, R. B., Fernandes, P. R. and Folgado, J., “A Multicriteria Shape
Optimization Model for Hip Prosthesis Design”, WCSMO-5; Fifth World Congress
on Structural and Multidisciplinary Optimization, Veneza, Italia, (artigo em CD),
2003.
199. Ruben, R. B., Folgado, J. and Fernandes, P. R., “Design of Hip Stems for Optimal
Displacement and Stress Distribution on Bone/Stem Interface”, International
Congress on Computational Bioengineering, Zaragoza, Spain, Vol. 2, pp. 510-519,
2003.
200. Santos, J. L. T., Freitas, M. De, Li, B. And Trigo, T. P., “Fatigue Assessment of
Mechanical Components under Complex Multiaxial Loading”, Biaxial/Multiaxial
Fatigue, ESIS STP 31, European Structural Integrity Society, edited by A.
Carpinteri, M. de Freitas and A. Spagnoli, pp. 463-482., 2003.
201. Schweiger, J., and Suleman, A., “The European Research Project: Active
Aeroelastic Aircraft Structures,” International Forum on Aeroelasticity and
Structural Dynamics, Amsterdam, NL, June, 2003.
202. Secanell, M., Suleman, A. and Costa, A. P., “An Adaptive Flight Vehicle for
Testing New Control Methodologies,” 19th Canadian Congress of Applied
Mechanics CANCAM 2003, The University of Calgary, June 1-6, 2003.
203. Silva, Miguel and Ambrósio, Jorge, The Effect Of Different Physiological Cost
Functions On The Solution Of The Redundant Problem In Biomechanics, in
Proceedings of ECCOMAS Thematic Conference on Advances in Computational
Multibody Dynamics 2003, (J. Ambrósio, Ed.), Lisbon, Portugal, July 1-4, 2003.
204. Silva, Miguel P.T. and Ambrósio, Jorge A.C., Variability of the Solution of the
Redundant Muscle Force Sharing in Biomechanics Due To the Choice of
Physiological Criteria, in Computational Methods in Engineering and Science (V.P.
Lu, L.N. Lamas, Y.-P. Li, K.M. Mok, Eds), A.A. Balkema Publishers, Lisse, The
Netherlands, (Proc. of EPMESC IX - The 9th International Conference on
Enhancement and Promotion of Computational Methods in Engineering and
Science, Macau, China, 25-28 November de 2003), 969-977, 2003.
205. Suleman, A., and Costa, A.P., “An RPV Adaptive Aeroelastic Demonstrator,”
European Workshop on Smart Structures in Engineering and Technology, Ed. B.
Culshaw, Proceedings of the SPIE, Vol. 4763, pp. 113-118, 2003.
206. Suleman, A., Costa, A.P., Rocha, J., Moniz, P. and Santos, D., “Research and
Development of an Active Aeroelastic Adaptive Flight Demonstrator,” International
Forum on Aeroelasticity and Structural Dynamics, Amsterdam, NL, June, 2003.
61
207. Wood, G., Nguyen, N., Suleman, A., Smith, M.T. and Simmons, L.L., “An
Approach to Design Optimization of Advanced Composite Hybrid Structures,”
Fourth Canadian International Composites Conference, CANCOM 2003, Ottawa,
ON, August 19-22, 2003.
208. Santos, J. V. A., Soares, C. M. M., Soares, C. A. M., Maia, N. M. M.
" Influence of Model Incompleteness and Errors in Structural Damage
Identification"
Proceedings of the International Conference on Composite Science and
Technology, ICCST/4, Durban, South Africa, Ed. S. Adali, E. V. Morozov and V.E.
Verijenko, School of Mechanical Engineering, University of Natal, Jan. 21-23,
2003, pp. 297-302.
209. Sampaio, R. P. C., Maia, N. M. M., Silva, J. M. M. "The Frequency Domain
Assurance Criterion as a Tool for Damage Detection" Proceedings of the 5th
International Conference on Damage Assessment of Structures (DAMAS 2003),
Southampton, UK, July 2003, pp. 69-76. Also in Key Engineering Materials, Vols.
245-246, pp. 69-76, Trans Tech Publications, Switzerland, 2003. (online at
http://www.scientific.net)
210. M. Ayala Botto, Ton J. J. van den Boom, Peter Hoekstra, “Feed-forward neural
networks in a real-time implementation of a predictive controller”, Intelligent
Control Systems and Signal Processing, pp. 72-77, Faro, Portugal, 2003.
211. V.M. Becerra, F. Garces, J. M. F. Calado e P. M. Silva, “Input-Output Linearization
of a Pilot Pressure Plant Using a Dynamic Neural NetworK Model”. Proc. of 3rd
International Conference on Artificial Intelligence and Applications, pp. 64-69,
Benalmadena, Espanha, September 2003.
212. C. D. Bocaniala, Sá da Costa, J., Louro, R. – A fuzzy classification solution to fault
diagnosis of valve actuators. A publicar em Proc. 7th International Conference on
Knowledge-Based Intelligent Information & Engineering Systems – KES’03,
Oxford, U.K., 2003.
213. J. M. F. Calado, R. Louro, M. J. G. C. Mendes, J. M. G. Sá da Costa and M. Kowal,
“Fault Isolation Based on HSFNN Applied to the DAMADICS Benchmark
Problem”. Proc. of 5th IFAC Symposium on Fault Detection, Supervision and
Safety of Technical Processes, SAFEPROCESS 2003, pp. 1053-1058, Washington,
USA, June 2003.
214. J. M. F. Calado, F. P. N. F. Carreira, M. J. G. C. Mendes, J. M. G. Sá da Costa and
M. Bartys, “Fault Detection Approach Based on Fuzzy Qualitative Reasoning
Applied to the DAMADICS Benchmark Problem”. Proc. of 5th IFAC Symposium
on Fault Detection, Supervision and Safety of Technical Processes,
SAFEPROCESS 2003, pp. 1179-1184, Washington, USA, June 2003.
215. J. M. F. Calado, P. M. A. Silva, J. M. G. Sá da Costa e V. M. Becerra,
“Reengineering an Embedded Laboratory Allowing Remote Experiments Through
the Internet”. Proc. of 6th IFAC Symposium on Advances in Control Education, pp.
101-106, Oulu, Finland, June 2003.
62
216. F.M. Campos, J.M. Calado, L.F. Baptista and J.M.G. Sá da Costa. On the
impedance parameter selection for robot force control. In Procedings of 11th
International Conference on Advanced Robotics, ICAR 2003, Vol. II, p.1202-1207,
Coimbra, Portugal, June 30 - July 3, 2003.
217. V. R. Cortés, J.R Azinheira e E.C de Paiva. “Parameter Identification of Nonlinear
Dynamic Model of AURORA Airship”. In 7th IFAC Symposium on Robot Control
SYROCO ’03, Wroclaw, Poland, September 2003.
218. S.P. Fernandes, L.F. Baptista and J.M.G. Sá da Costa. Contour tracking based on
force sensing with an industrial PUMA robot. In Procedings of 11th International
Conference on Advanced Robotics, ICAR 2003, Vol. II, p.1190-1195, Coimbra,
Portugal, June 30 - July 3, 2003
219. P.A. Fernandes Ferreira, J.R. Caldas Pinto, “3D and 2D Visual Servoing
Architectures for a PUMA560 Robot”, 7th Symposium on Robot Control, Syroco
2003, Vol. 1, pp 181-186, Wroclaw, Poland, September, 2003.
220. P. Gonçalves, J. R. Caldas Pinto, “Camera Configurations of a Visual Servoing
Setup for a 2 DOF Planar Robot”, 7th Symposium on Robot Control, Syroco 2003,
Vol. 1, pp 193-198, Wroclaw, Poland, September, 2003.
221. P. Gonçalves, J. R. Caldas Pinto, “An Experimental Testbed for Visual Servo
Control of Robotic Manipulators”, 2003 IEEE Conference on Emerging
Technologies and Factory Automation, ETFA 2003, Lisbon, Portugal, September
16-19, 2003, pp 377-381.
222. P. Gonçalves, J. R. Caldas Pinto, “Dynamic Visual Servoing of Robotic
Manipulators”, 2003 IEEE Conference on Emerging Technologies and Factory
Automation, ETFA 2003, pp 560-564, Lisbon, Portugal, September 16-19, 2003.
223. Marciniak, Bocaniala, C. D., Louro, R., Sá da Costa, J., Korbicz, J. – Pattern
recognition approach to fault diagnosis in the DAMADICS benchmark flow control
valve. In Proc. 5th IFAC Symposium on Fault Detection, Supervision and Safety of
Processes, 6 pages, Washington, USA, 2003.
224. J. Martins, M. Ayala Botto, José Sá da Costa, “Modelling for control of flexible
robot manipulators”, Multibody Dynamics 2003, 19 pages, Lisbon, Portugal, 2003.
225. J. M. Martins, M. Ayala Botto, José Sá da Costa, “A Newton-Euler model of a
piezo-actuated nonlinear elastic manipulator link”, Proceedings of 11th
International Conference on Advanced Robotics, pp. 935-940, Coimbra, Portugal,
2003.
226. J. Martins, Miguel Ayala Botto, José Sá da Costa, “Modelling and validation of
flexible robotic links”, 4th Mathmod – IMACS Symposium on Mathematical
Modelling, pp. 1212-1221, Vienna, Austria, 2003.
227. Moutinho, J. Azinheira, “Comparison and Fusion of Odometry and GPS Navigation
for an Outdoor Mobile Robot”, ICRA 2003, pp 1290-1295, Coimbra, Portugal, Jun
2003.
63
228. L.F. Mendonça, J.M. Sousa and J.M.G. Sá da Costa. Fuzzy model-based fault
detection and isolation. In Proceedings 9th IEEE International Conference on
Emerging Technologies and Factory Automation, ETFA´2003, 768-774, Lisbon,
Portugal, September 2003.
229. L.F. Mendonça, J.M. Sousa and J.M.G. Sá da Costa. Fault detection and diagnosis
using fuzzy models. In Proceedings of European Control Conference, ECC´2003,
Session Fault Diagnosis 2, pp. 1-6, Cambridge, United Kingdom, September 2003.
230. L. J. Nunes, Sá da Costa, J. M. G. – Chaotic time-series prediction using wavelet
descriptors-based neurofuzzy networks. In Proceedings of the IFAC Intelligent
Control Systems and Signal Processing, pp.7-12, Faro, Portugal, April 2003.
231. L. J. Nunes, Sá da Costa, J. M. G. – Regression matrices for identification and
training of wavelet descriptors-based neurofuzzy networks. In Proceedings of the
IFAC Intelligent Control Systems and Signal Processing, pp.347-352, Faro,
Portugal, April 2003.
232. M. A. Ramalho, Vitor Rocha, “ Sistemas de Demonstração para a Interactividade
Usando Sistemas Industriais”, Cibem 6 - VI Congresso Ibero-Americano de
Engenharia Mecânica, pp845-850, Coimbra, Portugal, Outubro 2003.
233. J. Sá da Costa, Caldas Pinto, P. – Modeling of a ocean wave power device - AWS.
A publicar em Proc. IEEE Conference on Control Applications, pp. 618-623,
Istambul, Turkey, 2003
234. J. Sá da Costa, Bocaniala, C. D., Louro, R. – A fuzzy classifier for fault diagnosis
of valve actuators. Proc. IEEE Conference on Control Applications, pp251-256,
Istambul, Turkey, 2003.
235. J. Sá da Costa, Louro, R. – Modelling and simulation of na industrial actuator valve
for fault diagnosis benchmark. In Proceedings of the 4th IMACS Symposium on
Mathematical Modelling, pp. 1212-1221, Vienna, Austria, Agersin-Verlag 2003.
236. J. Sá da Costa, P. Pinto, A. Sarmento, F. Gardner – Modelling and simulation of
AWS: A wave energy extractor. In Proceedings of the 4th IMACS Symposium on
Mathematical Modelling, pp. 16 1-170, Vienna, Austria, Agersin-Verlag 2003.
237. C.A. Silva, J. M. Sousa, T.A. Runkler and J.M.G. Sá da Costa. Evolved genetic
algorithms with fuzzy aggregation applied to priorities in logistic systems. In Proc.
9th IEEE Int. Conference on Emerging Technologies and Factory Automation,
ETFA´2003, 775-781, Lisbon, Portugal, Sept. 2003.
238. C.A. Silva, R. Palm, T.A. Runkler and J.M. Sousa. Market-based negotiation of
delivery dates in a logistic process. In Proc. of European Symposium on Intelligent
Technologies, Hybrid Systems and their Implementation on Smart Adaptive
Systems, Eunite´2003, pp. 69-74, Oulu, Finland, July 2003.
239. C.A. Silva, J.M. Sousa, T. A. Runkler and J.M.G. Sá da Costa. Optimization of
logistic processes using predictive ants. In Procedings of IFAC International
Conference on Intelligent Control Systems and Signal Processing, ICONS´2003, p.
101-106, Faro, Portugal, April 2003.
64
240. M. P. Silva, Alberto Bemporad, Miguel Ayala Botto, José Sá da Costa, “Optimal
control of uncertain piecewise affine/mixed logical dynamical systems”, European
Control Conference, 6 pages, Cambridge, United Kingdom, 2003.
241. G. Silveira, J. Azinheira, P. Rives, S. Bueno, "Line Following Visual Servoing for
Aerial Robots Combined with Complementary Sensors", ICRA 2003, pp 11601165, Coimbra, Portugal, Jun 2003.
242. J. M. Sousa, S. Madeira and U. Kaymak. Modeling charity donations using target
selection for revenue maximization. In Proceedings of 2003 IEEE International
Conference on Fuzzy Systems, FUZZ-IEEE’2003, pp. 654-659, St. Louis, USA,
May 2003.
243. J.M. Sousa, L.F. Mendonça, U. Kaymak and J.M.G. Sá da Costa. Fuzzy issues in
multivariable predictive control. In Proceedings of 2003 IEEE International
Conference on Fuzzy Systems, FUZZ-IEEE’2003, pp. 506-511, St. Louis, USA,
May 2003.
244. D. Valério, Duarte; J. Sá da Costa- Digital implementation of non-integer control
and its application to a two-link robotic arm. In European Control Conference 2003.
6 pages. Cambridge, September 2003.
245. D. Valério, Duarte; J. Sá da Costa - Optimisation of non-integer order control
parameters for a robotic arm. In 11th International Conference on Advanced
Robotics. pp. 387-392, Coimbra, Portugal, 2003.
246. Cravo M.R., “Emotions in AI” Proc. of the 7th World Multiconference on
Systemics, Cybernetics and Informatics (SCI 2003), Callaos N. et als (eds), Vol. II,
pp. 13-18. The International Institute of Informatics and Systemics, 2003.
247. Martins J. P., Morgado E. M. and Haugen R., “TPO: A System for Scheduling and
Managing Train Crew in Norway”, Proc. of the Annual Conference on Innovative
Applications of Artificial Intelligence (IAAI-2003), Riedl and Hill (eds.), pp. 25-32,
Menlo Park, CA: AAAI Press, 2003. This paper received the “Innovative
Application Award”. Pimentel C. F. and Cravo M.R., “Permissive Belief Revision
Using Default Logic´”, Proc. of the 7th World Multiconference on Systemics,
Cybernetics and Informatics (SCI 2003), Callaos N. et als (eds), Vol. II, pp. 151156. The International Institute of Informatics and Systemics, 2003.
248. Saldanha R. and Morgado E., “Solving Set Partitioning Problems with Global
Constraint Propagation”, Workshop on Constraint and Logic Programming Systems
(CLPS), 11th Portuguese Conference on Artificial Intelligence, EPIA-2003, in
Progress in Artificial Intelligence, Lecture Notes in Artificial Intelligence, Vol.
2902, Heidelberg, West Germany: Springer-Verlag, 2003
249. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Numerical and Experimental
Simulation of Three-Dimensional Cold Forming Parts”, (Invited session on
simulation of bulk forming problems) Proceedings of the 7th. International
Conference on Computational Plasticity, COMPLAS VII, Barcelona, 2003.
250. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Numerical and Experimental
Analysis of Bulk Forming Processes”, Proceedings of the 11th. International
65
Conference on Computational Methods and Experimental Measurements; CMEM
2003, Greece, 2003.
251. Rosa P. A. R., Baptista R. M. S. O., Rodrigues J. M. C. e Martins P. A. F., “An
Investigation on the External Inversion of Thin-Walled Tubes using a Die”, (Invited
session on anisotropy, FLD & computational plasticity in metal forming),
International Conference PLASTICITY2003, Canada, 2003.
252. Silva M. B., Baptista R. M. S. O. e Martins P. A. F., “Stamping Automotive
Components: A Numerical and Experimental Investigation”, International
Conference on Advanced Materials & Processing Technologies, AMPT2003,
Dublin, 2003.
253. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Formulação de Escoamento
Plástico: Aspectos de Natureza Computacional e Aplicação a Processos de
Forjamento”, VI Congresso Ibero-Americano de Engenharia Mecânica, CIBEM6,
Coimbra, 2003.
254. Rosa P. A. R., Baptista R. M. S. O., Rodrigues J. M. C. e Martins P. A. F.,
“Inversão Externa de Tubos Metálicos de Parede Fina”, VI Congresso IberoAmericano de Engenharia Mecânica, CIBEM6, Coimbra, 2003.
255. Rosa P. A. R., Rodrigues J. M. C. e Martins P. A. F., “Inversão de Tubos Metálicos
de Parede Fina”, XXIII SENAFOR, Porto Alegre, Brasil, 2003.
256. Alves L. M. M, e Rodrigues J. M. C., “Modelação Numérica e Experimental de
Sinterizados Metálicos” XXIII SENAFOR, Porto Alegre, Brasil, 2003.
257. Alves L. M. M., Rodrigues J. M. C.”Modelação Numérica e Experimental do
Forjamento a Frio de Sinterizados de Cobre” CIBEM6 – Cimeira Ibérica de
Engenharia Mecânica, Vol. II, 1169, Coimbra, 2003.
258. J.F.C.P. Antunes Simões, E. Matos da Rocha, Timothy J. Coole, Rui O. Baptista,
M.E. Antunes Simões, David Cheschire, “Abordagem Experimental à Tecnologia
da Fresagem a Alta Velocidade”, VI Congresso Ibero-Americano de Engenharia
Mecânica – CIBEM6, Coimbra, 2003.
259. Boynard, L. Quintino, P. Barros, “Variation of the Lateral Wave Influence in TOFD
Inspection with Respect to "Fast"", 2nd International NDT Symposium and
Exhibition, Istambul - Turkey, 2003.
260. L. Quintino, D. Iordachescu, “Control and Monitoring in Arc Welding-Time for
Reassessment", 56th Annual Assembly of the International Institute of Welding,
Bucharest, Roménia, 2003.
261. Vilaça P., E. Fraga, J. Sá, L. Quintino, “State of the Art in the Modelling of Friction
Stir Welding”, 56th Annual Assembly of the International Institute of Welding,
Bucharest, Roménia, 2003.
262. Vilaça P., Quintino L., Sheiki S., dos Santos J., “Determination of the Thermal
Efficiency in FSW via Analytical Modelling Formulation”, 56th Annual Assembly
of the International Institute of Welding, Bucharest, Roménia, 2003.
66
263. Salema A., Gonçalves "Soldaduras Dissimilares pelos Processos Laser e Tig
Pulsados/Análise Comparativa”, 3º Congresso Luso - Moçambicano de Engenharia,
Maputo, 2003.
264. Ferreira, J.C., “Fracture Analysis in Powder Metallurgy Tool Made by Direct Metal
Laser Sintering Rapid Tooling Technology”, proceedings 2nd International
Materials Symposium”, 65, Portugal, 2003.
265. Paulo Peças, Ana Motta and Elsa Henriques, “Modelo Tecnológico de Custo para a
Maquinagem por Electro-erosão”, Proceedings of the VI Congresso IberoAmericano de Engenharia Mecânica – CIBEM 6, Coimbra, 945-950, 2003.
266. Paulo Peças and Elsa Henriques, “Impacto da Utilização de Aditivos no Dieléctrico
de EDM no Acabamento de Superfícies Moldantes, Proceedings do VI Congresso
Ibero-Americano de Engenharia Mecânica – CIBEM 6, Coimbra, 1103-1108, 2003.
267. Paulo Peças and Elsa Henriques, “A Contribution for Best Practices Between
University and Industrial Companies”, Proceeding of the Business Excellence I,
Performance Measures, Bechmarking and Best Practices in New Economy, Braga,
476-481, 2003.
268. Paulo Peças and Elsa Henriques, “The Need for Agile Manufacturing
Implementation in Mould Making Business”, Proceeding of the Business
Excellence I, Performance Measures, Bechmarking and Best Practices in New
Economy, Braga, 321-326, 2003.
269. Duarte Trindade, Pedro Leal, Paulo Peças and Elsa Henriques, “Lean
Manufacturing Application to an Automotive Assembly Line”, Proceeding of the
Business Excellence I, Performance Measures, Bechmarking and Best Practices in
New Economy, Braga, 590-595, 2003.
270. P. Boavida and Artur Barreiros, “Modelling the Thermal Behaviour of Buildings in
Dynamic Conditions”, NAFEMS World Congress 2003, Nafems, Orlando, 2003.
Artur Barreiros, “Detailed Predictions of a Turbulent Diffusion Flame”, NAFEMS
World Congress 2003, Nafems, Orlando, 2003.
271. A.F. de O. Falcão, “First generation wave power plants: current status and R&D
requirements”, Proceedings of the 22nd International Conference on Offshore
Mechanics and Arctic Engineering, ASME, Cancun, Mexico, June 2003, paper
OMAE 2003-37366.
272. A.F. de O. Falcão, “Maximum energy production and maximum profit as
alternative criteria for wave power equipment optimization”, 5th European Wave
Energy Conference, Cork, Ireland, September 2003, Paper PD5.
273. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, “An inverse method for turbomachinery
cascades of blades - investigation of the existence and uniqueness of solution”.
Accepted for presentation at the Fifth International Conference on Advances in
Fluid Mechanics, WIT, Lisbon.
274. J. C. C. Henriques, L. M. C. Gato, “Computation of the NTUA/LTT compressor
annular-cascade flow using the multidimensional upwind residual distribution
67
method”. Accepted for presentation at the Fifth International Conference on
Advances in Fluid Mechanics, WIT, Lisbon.
275. Abreu, M. M., Magalhães, M. R., Cunha, N. S., Campo, S. L., Silva, P. G. (2003).
The Landscape Geomorphic Dynamic as a Contribution for the Local Ecological
Structure – Loures a Municipality of Lisbon Metropolitan Área (Portugal).
Extended Abstract In Proceedings of the 4th European Congress on Regional
Geoscientific Cartography and Information Systems, Bologna, June 2003.
276. Magalhães, M. R., Abreu, M. M., Silva, P. G., Cunha, N. S., Campo, S. L. (2003).
The Local Ecological Structure as a Tool of Landscape Sustainability – The Case
Study of Loures. Extended Abstract In Proceedings of the 4th European Congress
on Regional Geoscientific Cartography and Information Systems, Bologna, June
2003.
277. Rodrigues, J., T. Domingos (2003). The EKC and the rebound effect in a
microeconomic model subject to physical constraints. In Ulgiati (ed.), “3rd Biennial
International Workshop – Advances in Energy Studies: Reconsidering the
Importance of Energy, Porto Venere, Italy, 24-28 September 2002”, pp. 109-117.
278. Rodrigues, J., T. Domingos, (2003). The EKC and the rebound effect in a
microeconomic model subject to physical constraints. Frontiers 2: European
Applications in Ecological Economics. Fifth International Conference of the
European
Society
for
Ecological
Economics,
Tenerife,
Espanha.
http://www.euroecolecon.org/frontiers/Contributions/F2synopses/PS55.pdf
279. Simões, A., L. Serra, P. Canaveira, T. Domingos (2003). Ecological economic
analysis of agriculture: a methodological development and a case study. In Ulgiati
(ed.), “3rd Biennial International Workshop – Advances in Energy Studies:
Reconsidering the Importance of Energy, Porto Venere, Italy, 24-28 September
2002”, pp. 239-243.
280. Vieira, R., T. Domingos, P. Canaveira, A. Simões (2003). Biophysical aggregation
in life cycle assessment: Comparative economic ecological evaluation of eucalyptus
and industrial hemp fibres. Frontiers 2: European Applications in Ecological
Economics. Fifth International Conference of the European Society for Ecological
Economics,
Tenerife,
Espanha.
http://www.euroecolecon.org/frontiers/
Contributions/ F2synopses/ PS4.pdf
281. J. M. M. Sousa, J. C. F. Pereira. – “DPIV study of the effect of a gable roof on the
flow structure around a surface-mounted cubic obstacle”, Fifht International
Symposium on Particle Image Velocimetry, em Busan (Coreia do Sul), 22-24 de
Setembro de 2003 (publicado em CD-ROM, Ed., K. C. Kim; seleccionado para
publicação em revista).
282. Hayashi, T., Malico, I. e Pereira, J. C. F. (2003). 3-D study of the flame
stabilization on a two-layer porous burner. 17th International Congress of
Mechanical Engineering (COBEM), São Paulo, Brasil, 10-14 Novembro, paper
0989.
283. P. Perez, P.J. Coelho e M. El Hafi, “Radiative Accurate Numerical Solutions in
Two-Dimensional Axisymmetric Enclosures for a Gas-Particles Mixture with
68
Varying Soot Volumetric Fraction”, Eurotherm 73, Mons, Bélgica, 15-17 de Abril
(2003). Publicado em “Computational Thermal Radiation in Participating Media”,
P. Lybaert, V. Feldheim, D. Lemonier e N. Selçuk (Eds.), Elsevier, pp. 161-170.
284. Joseph, P.J. Coelho e M. El Hafi, “Application of the Discrete Ordinates Method to
Grey Media in Complex Geometries Using Unstructured Meshes”, Eurotherm 73,
Mons, Bélgica, 15-17 de Abril (2003). Publicado em “Computational Thermal
Radiation in Participating Media”, P. Lybaert, V. Feldheim, D. Lemonier e N.
Selçuk (Eds.), Elsevier, pp. 97-106.
285. P.J. Coelho, O.J. Teerling e D. Roekaerts, “Spectral Radiative Effects and
Turbulence-Radiation-Interaction in a Turbulent Piloted Jet Diffusion Flame”,
Eurotherm 73, Mons, Bélgica, 15-17 de Abril (2003). Publicado em
“Computational Thermal Radiation in Participating Media”, P. Lybaert, V.
Feldheim, D. Lemonier e N. Selçuk (Eds.), Elsevier, pp. 271-281.
286. P.J. Coelho, “Detailed Numerical Simulation of Radiative Transfer in a NonLuminous Turbulent Jet Diffusion Flame”, 3rd Mediterranean Combustion
Symposium, Marraquexe, Marrocos, 8-13 de Junho (2003), Vol. 1, pp. 511-522.
287. Costa, M., Parente, C. And Santos, A. (2003). Nitrogen oxides emissions from
buoyancy and momentum controlled turbulent methane jet diffusion flames.
Proceedings of the Third Mediterranean Combustion Symposium, pp. 646-654,
Marrakech, Morocco, 8-13 Junho.
288. Coelho, L. M. R., Costa, M., Brown, M. J., Judd, R. W. And Venderbosch, R. H.
(2003). Pollutant emissions on co-combustion of natural gas and biomass.
Proceedings of the 7th International Conference on Energy for a Clean
Environment, Paper 17.4, Lisboa, Portugal, 7-10 Julho.
289. Toledo, R., Azevedo, J. L. T. And Costa, M. (2003). Combustion characteristics of
a biomass grate fired furnace. Poster apresentado na 7th International Conference
on Energy for a Clean Environment, Lisboa, Portugal, 7-10 Julho.
290. Reinaldo, R.F., Bazzo, E., Azevedo, J.L.T., ”CFD based analysis of heat transfer in
a front wall pulverized coal fired boiler including superheaters”, 7th International
Conference on Energy for a Clean Environment, Lisbon, Portugal, 7-10/07/2003,
artigo 5.3.
291. Toporov, D. and Azevedo, J.L.T. ,“A CFD based numerical investigation of the
coal quality impact on the combustion process”, 7th International Conference on
Energy for a Clean Environment, Lisbon, Portugal, 7-10/07/2003, artigo 4.7.
292. Reinaldo, R.F., Bazzo, E., Azevedo, J.L.T., “Use of a CFD based numerical model
to calculate heat transfer in boiler superheaters panels”, 17th International Congress
of Mechanical Engineering, São Paulo, Brasil, 10-14/11/2003, artigo 0327.
293. Toledo, R. and Azevedo, J.L.T., “CFD based numerical modeling of different
furnace configurations using air staging and reburning”, 17th International
Congress of Mechanical Engineering, São Paulo, Brasil, 10-14/11/2003, artigo
0331.
69
294. Azevedo, J.L.T., “Implementation of heat transfer monitoring systems in solid fuel
fired boilers”, 17th International Congress of Mechanical Engineering, São Paulo,
Brasil, 10-14/11/2003, artigo 0975.
295. Simões, A. M. and Farias, T. L. Transtagus Environmental and Economic Impact of
Multimodal Trips in Lisbon’s Metropolitan Area in Proceedings of Clean Air 2003,
July 2003, Lisbon
296. M. C. Coelho, T. L. Farias e N. M. Rouphail, Modelling Traffic and Emission
Performance of Speed Control Traffic Signals, comunicação em Actas da VII Clean
Air Conference, realizada em Lisboa, Julho de 2003, 15 pág.
297. M. C. Coelho e T. L. Farias, STOP&GO - Evaluation of the Environmental Impact
of Stopping at Tolls, Gas Stations and Traffic Lights, comunicação em Actas da VII
Clean Air Conference, realizada em Lisboa, Julho de 2003, 7 pág.
298. M. C. Coelho, T. L. Farias e F. N. Silva, Environmental Impact Modelling of
Traffic in Linear Access Corridors to Large Urban Regions, comunicação em Actas
da VII Clean Air Conference, realizada em Lisboa, Julho de 2003, 1 pág.
299. L. Vasconcelos, B. A. Lucena, M. C. Coelho e T. L. Farias, Noise Impact of Urban
Road Transport - Numerical and Experimental Characterization of Noise Emission
Levels, comunicação em Actas da VII Clean Air Conference, realizada em Lisboa,
Julho de 2003, 13 pág.
300. M. C. Coelho, T. L. Farias e N. M. Rouphail, A Methodology for Modelling and
Measuring Traffic and Emission Performance of Speed Control Traffic Signals,
comunicação em Actas do 12th International Scientific Symposium Transport and
Air Pollution 2003, realizado em Avignon (França), Junho de 2003, 6 pág.
301. Silva, C. M., Farias, T. L. and Mendes-Lopes, J. M. C. "Calculation of Tailpipe
Emissions in EcoGest", "Clean Air 2003 - Seventh International Conference on
Technologies and Combustion for a Clean Environment", Lisboa, 7 a 10 de Julho
de 2003;
302. Silva, C. M., Farias, T. L. and Mendes-Lopes, J. M. C. "Calculation of fuel
consumption and engine out emissions in EcoGest", "Clean Air 2003 - Seventh
International Conference on Technologies and Combustion for a Clean
Environment", Lisboa, 7 a 10 de Julho de 2003;
303. Silva, C. M. and Farias, T. L. Lopes, "FROTLAB - a portable environmental
monitoring and forecasting laboratory for vehicles", "Clean Air 2003 - Seventh
Environment", Lisboa, 7 a 10 de Julho de 2003;
304. Silva, C. M. and Farias, T. L. Lopes "ECODRIVE - a simulator for educational
environmental and ecological driving behaviour", "Clean Air 2003 - Seventh
Environment", Lisboa, 7 a 10 de Julho de 2003.
305. Naim H.Afgan, Sustainable Energy Development in Islamic Countries, 12th
Conference of Islamic Academy of Sciences, Kuching , Malaysia, 2003
70
306. Naim H. Afgan, Invited Lecture. Sustainable Development of Energy, Water and
Environment Systems, Dubrovnik 2003
307. Naim H.Afgan, Invited Lecture, Sustainability Indicators for Energy Systems,
International Conference on Exergy, Energy and Environment, Izmir,2003
308. Mario Baburic, Neven Duic, Alexandre Raulot, Reinhard Tatschl, Bruno Wiesler,
Accurate Discrete Transfer Radiation Modelling in Industrial Furnaces - a
Validation Study, Proceedings of the Conference on Modelling Fluid Flow (Eds. T.
Lajos, J. Vad), 262-268 (2003).
309. Mario Baburic, Daniel Rolph Schneider, Zeljko Bogdan, Neven Duic, User
Functions as a Development Tool in Commercial CFD Environments, CD
Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics
and Thermodynamics, HEFAT2003 (Ed. Joshua P. Meyer), (2003).
310. Neven Duic, Maria Graça Carvalho, Increasing the Penetration of Intermittent
Renewable Energy Sources in Island Energy Supply, CD Proc. of the 2nd
Dubrovnik Conference on Sustainable Development of Energy, Water and
Environment Systems / (Ed. Zvonimir Guzovic), (2003).
311. Marko Liposcak, Naim Afgan, Neven Duic, Maria Graça Carvalho, Sustainability
assessment of co-generation sector development in Croatia, CD Proc. of the 2nd
Dubrovnik Conference on Sustainable Development of Energy, Water and
Environment Systems / (Ed. Zvonimir Guzovic), (2003).
312. Marko Liposcak, Paolo Curto, Neven Duic, Maria Graça Carvalho, Feasibility of
Microcogeneration Plant Installation: Portuguese Legal Framework Implemented in
Croatian Circumstances, CD Proc. of the CLEANAIR 2003, 7th International
Conference on Energy for a Clean Environment, (2003).
313. Daniel Rolph Schneider, Neven Duic, Zeljko Bogdan, Emission optimisation of a
CHP plant, CD Proc. of the CLEANAIR 2003, 7th International Conference on
Energy for a Clean Environment, (2003).
314. Luis Manuel Alves, Ruy Santos, Anildo Costa, Neven Duic, Maria Graça Carvalho,
Promoting New and Renewable Energy Solutions (NRET) for Energy, Water and
Sustainable Tourism in Islands, International Conference on Renewable Energy
Sources for Islands, Tourism and Desalination, (2003)
315. Neven Duic, Maria Graça Carvalho, Increasing the Renewable Energy Penetration
by Hydrogen Energy Storage in Isolated Energy, CD Proceedings of 11th
Symposium of Thermal Engineers from Serbia and Montenegro, Energy, Energy
Efficient and Ecologically Acceptable Processes in Thermal, Chemical and Process
Engineering, Zlatibor (2003)
316. Mario Baburic, Alexandre Raulot, Neven Duic, Implementation of Discrete
Transfer Radiation Method into SWIFT CFD Code, CD Proceedings of 11th
Symposium of Thermal Engineers from Serbia and Montenegro, Energy, Energy
Efficient and Ecologically Acceptable Processes in Thermal, Chemical and Process
Engineering, Zlatibor (2003)
71
317. Mario Colnar, Goran Krajacic, Marko Ban, Neven Duic, Interactive Teaching of
Energy Management, 10th International Literacy and Education research Network
Conference on Learning, London (2003)
318. Fengzhen Chen, Neven Duic, Maria Graça Carvalho, Introduction of Renewable
Energy to Northwest of China Using the Clean Development Mechanism: Cases
Studies of Lanzhou and Urumqi, CD Proc. of the CLEANAIR 2003, 7th
International Conference on Energy for a Clean Environment, Lisbon (2003)
319. Neven Duic, Maria Graça Carvalho, Integration of Renewable Energy Sources and
Hydrogen Storage in Porto Santo, CD Proc. of the CLEANAIR 2003, 7th
International Conference on Energy for a Clean Environment, Lisbon (2003)
320. Boris Adum, Neven Duic: Utjecaj izolacije stambenih objekata na ispunjenje
obaveza Kyoto-protokola, Proc. of the 17th International Symposium of Heating,
Refrigerating and Air-Conditioning INTERKLIMA 2003, Zagreb, 351-373 (2003)
321. Marko Liposcak, Hrvoje Petric, Drazen Loncar, Neven Duic, Zeljko Bogdan,
Model of technoeconomic analysis of microcogeneration plant in residential sector,
Proc. of the 17th International Symposium of Heating, Refrigerating and AirConditioning INTERKLIMA 2003, Zagreb, 307-349 (2003)
322. Mario Baburic, Alexandre Raulot, Daniel Rolph Schneider, Peter Priesching, Bruno
Wiesler, Reinhard Tatschl, Neven Duic, Radiation and non-premixed combustion
modelling in SWIFT - latest developments, CD Proceedings of International User
Meeting 2003, Advanced Simulation Technologies, Graz (2003).
323. Neven Duic, Maria Graça Carvalho, Renewable Energy Sources in Island Energy
Supply, Book of Abstracts of 1st International Symposium on Environmental
Management, Zagreb (2003).
324. Daniel Rolph Schneider, Neven Duic, Zeljko Bogdan, Sustainable Management of
CHP by Internalisation of Emission Cost, Book of Abstracts of 1st International
Symposium on Environmental Management, Zagreb (2003).
325. Nogueira, M., Carvalho, MG, “Modelling in Glass Industry”, International
Commission on Glass Annual Congress, Campos de Jordão, Brazil, 21-25
September 2005.
326. Afgan, N.H. and Carvalho, M.G. – “Distance Learning for Sustainability Education:
EURO Courses in Multimedia Environment on Sustainability Assessment of
Energy Systems”. The World Environmental Education Congress, Espinho,
Portugal, 20-24 Maio 2003.
327. Melim Mendes, J. M., Carvalho, M.G., Duic, N. and Alves, L. M. – “Green Hotel”.
2nd Dubrovnik Conference on Sustainable Development of Energy, Water and
Environment Systems, Dubrovnik, Croácia, 15-20 Junho 2003.
328. Carvalho, M.G and Afgan, N.H. – “Sustainability Index of New and Renewable
Energy Power Plants”. The First International Exergy, Energy and Environment
Symposium (IEEES-1), Izmir, Turquia, 13-17 Julho 2003.
72
329. Fernandes, T.R.C., Chen, F., and Carvalho, M.G. – “ Hysociety – The European
Hydrogen (Based) Society”. 14th Annual U.S.Hydrogen Meeting, Washington,
E.U.A., 4-6 Março 2003.
330. Alves, L. M., Fernandes, U. and Carvalho, M.G. – “The Role of Renewable Energy
Sources in the Development of Cape Verde Islands”. Conferência Energies
Renovables Patrimoni I Desenvolupament Sostenible Insular, Campos (Ilhas
Baleares), Espanha, 7-8 Abril 2003.
331. Pitarma, R. A., Ramos, J. E. and Carvalho, M.G. – “Occupational Health:
Simulation of Room Air – Contaminant Distribution”. SETAC Europe 13th Annual
Meeting, Hamburgo, Alemanha, 27 Abril - 1 Maio 2003.
332. Pitarma, R. A., Ferreira, M. E. and Carvalho, M.G. – “Modelling Temperature
Fluctuations in Food Cold Storage to Prevent Toxicity Risk”. SETAC Europe 13th
Annual Meeting, Hamburgo, Alemanha, 27 Abril - 1 Maio 2003. Abstract Book,
pp. 89.
333. Ramos, J. E., Pitarma, R. A., Ferreira, M. E. and Carvalho, M.G. – “Indoor
Environment Quality – A New Challenge for the Environmental Education”. First
World Environmental Education Congress, Espinho, Portugal, 20-24 Maio 2003,
Abstract Book , pp. 275.
334. Alves, L. M., Roriz, L., Carvalho, M.G. and J. Melim Mendes – “Integrating Self
Supply into End Use for Sustainable Tourism in Islands - The Madeira Island Green
Hotel Project”. International Conference on RES for Island, Tourism & Water
Desalination, Creta, Grécia, 26-28 Maio 2003.
335. Lopes dos Santos, R. S., Carvalho, M.G. and Alves, L. M. – “Integration of
Renewable Energy Sources (RES) and Conventional Energies for the Resolution of
the Energy Supply Problems on the Islands: a System to Integrate the RES as a
Solution of the Energy Security Supply Problem on the Cape Verde Islands
(Thermal Wind Solar Power Plant – TWSPP)“. International Conference on RES
for Island, Tourism & Water Desalination, Creta, Grécia, 26-28 Maio 2003.
336. Zsigraiová, Z., Tavares, G., Semião, V. and Carvalho, M.G. – “Municipal Solid
Waste Incineration in Europe – Contribution to Sustainable Development of Energy
and Environment”. 2nd. Dubrovnik Conference on Sustainable Development of
Energy, Water and Environment Systems, Dubrovnik, Croácia, 15-20 Junho 2003.
337. Costa, A., Afgan, N. and Carvalho, M.G. – “An Expert System to Integrate
Renewable Energy Sources in an Energy Supply System: the Solar Thermal
Module”. 2nd. International Conference on Heat Transfer, Fluid Mechanics and
Thermodynamics, 23-26 Junho 2003, Victoria Falls, Zambia.
338. Zsigraiová, Z., Tavares, G., Semião, V. and Carvalho, M.G. – “Municipal Solid
Waste Incineration – Problems and Future Perspectives”. Seventh International
Conference on Energy for a Clean Environment, Lisboa, Portugal, 7-10 Julho 2003.
339. Alves, L.M., Fernandes, U. and Carvalho, M.G. – “Promoting the Use of New and
Renewable Energy Sources for Island Sustainable Development”. “Poster”
73
apresentado na Seventh International Conference on Energy for a Clean
Environment, Lisboa, Portugal, 7-10 Julho 2003.
340. Carvalho, M.G. and Afgan, N. – “Sustainability Index of New and Renewable
Energy Power Plants”. The First International Exergy, Energy and Environment
Symposium, Izmir, Turquia, 13-17 Julho 2003.
341. Pitarma, R.A., Ramos, J. E. and Carvalho, M.G. – “Computational and
Experimental Reduced-Scale Modelling of Air-Conditioned Rooms”. Eighth
International IBPSA Conference Building Simulation 2003, Eindhoven, Holanda,
11-14 Agosto 2003. Proceedings, Vol III, pp. 1041-1045.
342. T.R.C. Fernandes, Fengzhen Chen, Maria da Graça Carvalho, HySociety: Paving
the way for the European Hydrogen-based Society, International Workshop on the
Design and optimization of Energy Systems, 8-10 January 2003, Delft, The
Netherlands.
343. T.R.C. Fernandes, Fengzhen Chen, Maria Graca Carvalho, Hysociety-the European
hydrogen (based) society, Proceedings of The 14th Annual U.S. Hydrogen Meeting,
4-6 March 2003, Washington DC., U.S.A.
344. Shaowu Zha, Fengzhen Chen, Jian Dong, and Meilin Liu, Pre-reforming of Propane
for Low-Temperature SOFCs, Proceedings of 204th Meeting of The
Electrochemical Society, Orlando, Florida, October 16, 2003.
345. J.T.McMullan, A. Minchener, K. Hein, Z. Zsigraiová, I. Romey, S. Pasini, L.
Jacquet, S. Jansson - “Powerclean Fossil Fuel RTD Thematic Network”, Seventh
International Conference on Energy for a Clean Environment, Lisboa, Portugal, 710 Julho 2003.
346. Gonçalves, G. A., Farias, T.L. and Carvalho, M.G., CUTE – Clean Urban Transport
for Europe, Seventh International Conference on Energy for a Clean Environment,
7-10 July 2003, CalousteGulbenkian Foundation, Lisbon, Portugal
347. Active Aeroelastic Aircraft Demonstrator, Canada-US Workshop in Smart
Structures and Materials, Montreal, QB, Canada, October 2002.
348. Ambrósio, J. Advances in the Modeling of Flexible Multibody Systems, In
Proceedings of the International Symposium on Multibody Systems and
Mechatronics, Mexico City, Mexico, September 12-15, 2002.
349. Ambrósio, J. Contact and Impact Models for Vehicle Crashworthiness Simulation,
In Proceedings of the ICRASH 2002, International Crashworthiness Conference,
(E.C. Chirwa, Ed.), Melbourne, Australia, February 25-27, 2002.
350. Ambrósio, J. Impact of Rigid and Flexible Multibody Systems: Deformation
Description and Contact Models, in Proceedings of the NATO-ASI in Virtual
Nonlinear Multibody Systems: Volume II, (Michael Valasek, Werner Schiehlen,
Eds.), Prague, Czeck Republic, June 23 – July 3, 15-33, 2002.
351. Araújo, L., Soares, C. M. Mota and Herskovits, J. “Modelo NuméricoExperimental para a Identificação de Propriedades Electromecânicas em Materiais
Laminados Piezoeléctricos”, Proc. V Congreso Métodos Numericos en la
74
Ingenieria, ed. J. M. Goicolea, C. A. Mota Soares, M. Pastor and G. Bugeda,
SEMINI, España 2002.
352. Bendsoe, M. P., Guedes, J.M., Neves, M.M., Rodrigues, H. and Sigmund, O.,
"Aspects of the design of microstructures by computational means.", Int. School
and Workshop on Homogenization, Napoli, Italy, June 18-27, 2001 (L. Carbone
and R. De Arcangelis, eds.), GAKUTO Int. Series in Math. Sci, Appl., Vol. xx,,
Gakkotosho, Tokyo, 2002, 14 pp (to appear).
353. Dias, J. P. and Pereira, M. S., ”Optimization Of Rigid-Flexible Multibody Systems
With Application to Vehicle Dynamics and Crashworthiness”, Proceedings NATO
ASI Workshop on Virtual Nonlinear Multibody Systems, Edited by W. Schiehlen
and M. Valášek, pp 186-195, Prague, Check Republic, June 23-July 3, 2002.
354. Dias, J. P. and Pereira, M. S., ”Simplified Models for Train Crashworthiness Design
and Simulation”, in Book of Abstracts of the V Congreso de Métodos Numéricos en
Ingeniería, J. M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda (Eds.) pp. 274,
artigo completo em CD-ROM, June 3-6, Madrid, Spain, 2002.
355. Dimitrovová, Z., Advani, S.G. “Analysis and Characterization of Relative
Permeability for Free Surface Flow in Dual Porous Media”, Proc. Of the 9
International Conference on Composites Engineering, pp. 171-172, July 1-6, 2002,
San Diego, California, EUA (presented by Z. Dimitrovová).
356. Dimitrovová, Z., Advani, S.G. “Escoamentos Não Saturados em Meios com
Porosidade Dupla Durante o Processo de Fabrico RTM”, Proc. Of the V Congresso
de Métodos Numéricos en Ingeniería, pp.282, June 3-6, 2002 Madrid, Spain
(presented by Z. Dimitrovová).
357. Dimitrovová, Z., Advani, S.G., “ The Role of Relative Permeability in Simulation
of RTM Process Filling Phase”, Proc. Of the 6 International Conference on
Computational Structures Techonology, pp. 311-312, September 4-6, 2002, Prague,
Czech Republic, presented by Z. Dimotrovová).
358. Fernandes P. R. and Ruben, R. B. , “Optimização de Forma de Prótese da
Articulação da Anca”, Metodos Numericos en Ingenieria V (Eds. J.M. Goicolea,
C.A. Mota Soares, M. Pastor e G. Bugeda), Madrid, Espanha, pp. 77 (artigo em
CD), 2002.
359. Fernandes, P. R., Folgado, J., Jacobs, C., and Pellegrini, V., “How the stem shape
can influence the bone ingrowth and the stability of a hip prosthesis”, In Acta of
BioEngineering and Biomechanics, Vol.4, Supp. 1, 13th Conference of the
European Society of Biomechanics, Wroclaw, Poland, pp.249-250, 2002.
360. Fernandes, P. R., Folgado, J., Ruben, R. B., “Computational Models to Study the
Relation of Stem Shape with the Mechanical Stability of a Cementless Hip
Prosthesis”, Advanced School and Workshop on: Bone Mechanics – Mathematical
and Mechanicsl Models for Analysis and Synthesis, Lisboa, Portugal, 2002.
361. Fernandes, P. R., Ruben, R. B. , “A computational procedure to optimize the shape
of a cementless hip stem”, In Acta of BioEngineering and Biomechanics, Vol.4,
75
Supp. 1, proceedings of 13th Conference of the European Society of Biomechanics,
Wroclaw, Poland, pp.255-256, 2002.
362. Folgado, J., Fernandes, P. R., Rodrigues, H. and Guedes, J.M., “Modelo
Computacional para a Análise do Intracrescimento Ósseo em Prótese da
Articulação da Anca”, Metodos Numericos en Ingenieria V (Eds. J.M. Goicolea,
C.A. Mota Soares, M. Pastor e G. Bugeda), Madrid, Espanha, pp. 78 (artigo em
CD), 2002.
363. Garção, J. E. Semedo, Soares, C. M. Mota, Soares, C. A. Mota and Reddy, J.N.,
“Modelos Multi-Lâmina para a Análise de Placas Laminadas Adaptativas”, Proc. V
Congreso Métodos Numericos en la Ingenieria, ed. J. M. Goicolea, C. A. Mota
Soares, M. Pastor and G. Bugeda, SEMINI, España 2002.
364. Garção, J.E. Semedo, Soares, C.M. Mota , Soares, C. A. Mota, Reddy, J. N.
“Modelling of Adaptive Structures Using Layerwise Finite Element Model”,
WCCM V Fifth World Congress on Computacional Mechanics, July 7-12, 2002,
Viena, Austria, Ed. H. A. Mang, F. G. Rammestorfer, J. Eberharsteiner.
365. Garção, Semedo, J.E., Soares, C.M. Mota, Soares, C.A. Mota , Reddy, J.N.
“Modelling of Adaptive Structures Using Layerwise Models”, Proc. Sixth
International Conference on Computational Structures Technology, Ed. B. H. V.
Topping and Z. Bittner, Civil-Comp Pres, Stirling, Scotland, Paper 127, pp 1-17,
2002.
366. Gonçalves, J. and Ambrósio, J., Vehicle Comfort Optimization Using Flexible
Multibody Models, in Proceedings of the First Asian Conference on Multibody
Dynamics 2002, Fukushima, Japan, July 31 – August 2, 543-551, 2002.
367. Gonçalves, J. and Ambrósio, J., Vehicle Handling Dynamic Response Optimization
Using Flexible Multibody Simulation, In Proceedings of Métodos Numéricos en
Ingenieria V (J.M. Goicolea, C Mota Soares, M. Pastor, G. Bugeda, Eds.), Madrid,
Spain, June 5-8, 2002.
368. Herskovits, J., Veranise Dubeux, Soares, Cristóvão M. Mota, Araíjo, Aurélio L. ,
“Interior Point Algorithms for Nonlinear Constrained Least Squares Problems”, 4th
International Conference on Inverse Problems in Engineering, Rio de Janeiro,
Brasil, Maio 2002.
369. Lage, R. Garcia, Soares, C.M. Mota, Soares C.A. Mota, Reddy, J.N. “Mixed
Layerwise Finite Elements for the Analysis of Piezolaminated Plate Structures”,
Proc. Ninth Annual International Conference on Composites Engineering, ICCE/9,
Ed. David Hui, College of Engineering, University of New Orleans, USA, pp. 431432, 2002.
370. Lage, R. Garcia, Soares, C.M. Mota, Soares, C.A. Mota , Reddy, J.N. “Modelling
of Piezolaminated Plates Using Layerwise Mixed Finite Elements”, Proc. Sixth
International Conference on Computational Structures Technology Ed. B. H. V.
Topping and Z. Bittner, Civil-Comp Pres, Stirling, Scotland, Paper 127, pp 1-17,
2002.
76
371. Leite, A., Dimitrovová, Z., Travassos, J., “ Numerical Simulation and Design of
Complex Composite Structures”, Proc. Of the 10 International Conference on
Machine Design and Production, September 4-6, 2002, Cappadocia, Turquia
(presented by A. Leite).
372. Leontiev, A., W.D.H. Huacasi, J. Herskovits, R.S. Busse, C.M. Mota Soares,
“Forest Impact Problem: Numerical Simulation”, 55º Seminário Brasileiro de
Análise, Edição J.M.A. Botelho, Faculdade de Matemática, Universidade Federal
de Uberlândia, Brasil, SBA-55, Vol. 1, pp 495-510, 2002.
373. Leontiev, W.D.H. Huacasi, J. Herskovits, R.S. Busse, C.M. Mota Soares, “A
Numerical Aproach to the Forest Impact Problem”, Anais de Mecânica
Computacional, Vol. XXI, No. 1-16. MECOM 2002, 28-31 de Outubro de 2002,
Santa Fé, Paraná, Argentina.
374. Leontiev, W.D.H. Huacasi, J. Herskovits, R.S. Busse, C.M. Mota Soares,
“Identification of the Groundwater Table Location in the Forest Impact Problem”,
4th International Conference on Inverse Problems in Engineering, Rio de Janeiro,
Brasil, 2002.
375. Madeira, J. F. Aguilar, “Multi-Objective Topology Optimization Of Structures”,
CST 2002 – Prague - Czech Republic, 4-6 September 2002.
376. Milho, J., Ambrósio, J., and Pereira, Manuel Seabra, Validated Multibody Model
for Train Crash Analysis, In Proceedings of the ICRASH 2002, International
Crashworthiness Conference, (E.C. Chirwa, Ed.), Melbourne, Australia, February
25-27, 2002.
377. Moita, J. M. Simões, Soares, C. M. Mota and Soares, C. A. Mota, “Non-linear
Analysis of Composite Structures with Integrated Piezoelectric Sensors and
Actuators”, QUASE 2002, Int. Congress on Quality Assessment of Numerical
Simulations in Engineering, April 9-12, 2002, University of Conception, Chile.
378. Moita, J. S., Soares, C. M. Mota and Soares, C. A. Mota, “Análise
Geometricamente Não-Linear de Estruturas Adaptativas Piezolaminadas” , Proc. V
Congreso Métodos Numericos en la Ingenieria, ed. J. M. Goicolea, C. A. Mota
Soares, M. Pastor and G. Bugeda, SEMINI, España 2002.
379. Neto, Maria Augusta and Ambrósio, J., Stabilization Methods For The Integration
of Differential-Algebraic Equations In The Presence of Redundant Constraints, In
Proceedings of Métodos Numéricos en Ingenieria V (J.M. Goicolea, C Mota Soares,
M. Pastor, G. Bugeda, Eds.), Madrid, Spain, June 5-8, 2002.
380. Neto, Maria Augusta and Ambrósio, J., Stabilization Methods for the Integration of
DAE in the Presence of Redundant Constraints, in Proceedings of the NATO-ASI
in Virtual Nonlinear Multibody Systems: Volume II, (Michael Valasek, Werner
Schiehlen, Eds.), Prague, Czeck Republic, June 23 – July 3, 150-158, 2002.
381. Neves, M. M., Sigmund, O., and Bendsøe, P., “Topology optimization of periodic
microstructures with a buckling criteria”. In H. A. Mang, F. G. Rammerstorfer, and
J. Eberhardsteiner, editors, Proceedings of the Fifth World Congress on
77
Computational Mechanics, page http://wccm.tuwien.ac.at. Vienna University of
Technology, Austria, 2002.
382. Neves, M.M. "Análise de Ondas de Bloch em materiais compósitos e sua aplicação
à optimização microestrutural". In Goucolea, J.M., Mota Soares, C., Pastor, M. E
Budega, G., editors, Proceedings doV Congresso de Métodos Numéricos em
Engenharia, Madrid, 3 a 6 de Junho de 2002, pp. 289 (artigo completo em CDROM incluído), Materials Compuestos, publicado por SEMNI – Sociedade
Espanola de Métodos Numéricos en Ingenieria (2002).
383. Pedersen, Sine., Hansen John and Ambrósio, J.,A Novel Roller-Chain Drive Model
Using Multibody Dynamics Analysis Tools, in Proceedings of the NATO-ASI in
Virtual Nonlinear Multibody Systems: Volume II, (Michael Valasek, Werner
Schiehlen, Eds.), Prague, Czeck Republic, June 23 – July 3, 180-185, 2002.
384. Pereira, M. S. and Dias, J.P., “Analysis and Design for Train Crashworthiness
Using Multibody Models”, Proceedings of the Fifth World Congress on
Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria, Editors:
Mang, H.A.; Rammerstorfer, F.G.; Eberhardsteiner, J., Publisher: Vienna
University of Technology, Austria, ISBN 3-9501554-0-6.
385. Pombo, J. and Ambrósio, J., Development of a Roller Coaster Model, In
M. Pastor, G. Bugeda, Eds.), Madrid, Spain, June 5-8, 2002.
386. Pombo, J. and Ambrósio, J., Development of a Roller Coaster Model, in
Proceedings of the NATO-ASI in Virtual Nonlinear Multibody Systems: Volume II,
(Michael Valasek, Werner Schiehlen, Eds.), Prague, Czeck Republic, June 23 – July
3, 195-203, 2002.
387. Schweiger, J., and Suleman, A., “MDO Concepts for an European Research Project
on Active Aeroelastic Aircraft,” 9th AIAA/ISSMO Symposium on
Multidisciplinary Analysis and Optimization Conference, Paper No.: AIAA-20025403, September, 2002.
388. Sedaghati, R., and Suleman, A., “Maximum Limit Load Design Optimization of
Shallow Frame Structures Undergoing Large Delfections,” 2nd Canadian
Conference on Nonlinear Solid Mechanics, CanCNSM, June, 2002.
389. Silva, M. and Ambrósio, J., Solution of the Redundant Muscle Forces in Human
Locomotion With Multibody Dynamics and Optimization Tools, in Proceedings of
the NATO-ASI in Virtual Nonlinear Multibody Systems: Volume II, (Michael
Valasek, Werner Schiehlen, Eds.), Prague, Czeck Republic, June 23 – July 3, 234240, 2002
390. .Silva, M., and Ambrósio, J., A Multibody Based Methodology for the Solution of
the Redundant Nature of the Muscle Forces Using Static Optimization, In
M. Pastor, G. Bugeda, Eds.), Madrid, Spain, June 5-8, 2002
391. Silva, M., and Ambrósio, J., Out-of-Position Vehicle Occupants Models in a
Multibody Integrated Simulation Environment, in Proceedings of IRCOBI2002
78
International IRCOBI Conference on the Biomechanics of Impact, Munich,
Germany, September 18-20, 2002.
392. Silva, M., and Ambrósio, J., Prediction of the Redundant Muscle Forces in Human
Motion Using Multibody Based Methodologies and Static Optimization Tools, In
Proceedings of the International Symposium on Multibody Systems and
Mechatronics, Mexico City, Mexico, September 12-15, 2002.
393. Soares, C. M. Mota , Soares, C. A. Mota, Garção J. E. Semedo and Reddy, J.N.
“Modeling of Layerwise Piezolaminated Structures”, Smart Structures and
Integrated Systems, ed. By L. Porter Davies, SPIE, The International Society of
Optical Engineering, Vol. 4701, paper n.º 17, 2002.
394. Suleman, A., and Gomes, M.A., “Spectral Level Set Methods in Topological
Optimization,” 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and
Optimization Conference, Paper No.: AIAA-2002-5453, September, 2002
395. Suleman, A., and Sedaghati, R., “Design Optimization Against Instability of Frame
Structures Undergoing Large Deflections,” 9th AIAA/ISSMO Symposium on
Multidisciplinary Analysis and Optimization Conference, Paper No.: AIAA-20025527, September 2002.
396. Ribeiro, A. M. R., Fontul, M., Silva, J. M. M., Maia, N. M. M., “Transmissibility
Matrix in Harmonic and Random Process” – Proceedings of the International
Conference on Structural Dynamics Modelling, pp. 629-634, Funchal, Madeira,
Portugal, June 2002
397. Morais, P., Silva, J. M. M., Carvalhal, F., “Modelling of Moveable Joints for Model
Updating of Dynamic Mechanical Systems” – Proceedings of the International
Portugal, June 2002
398. Silva, F. A. P., Martins, I., Esteves, J. “Evolution of Automatic Suspension Systems
by Inclusion of Electromagnetic Devices” - Proceedings of the International
Portugal, June 2002
399. M. Ayala Botto, Robert Babuska, José Sá da Costa, “Discrete-time robust poleplacement design through global optimization'', In Proceedings of the 15th IFAC
World Congress, 6 pages, Barcelona, Spain, 2002.
400. J. Azinheira, P. Rives, J.R. Carvalho, G. Silveira, E. de Paiva, S. Bueno, "Visual
Servo Control of an Outdoor Robotic Airship", IEEE-ICRA 2002, Washington,
USA, May 2002, pp 2787-2792
401. J.A. Borges, M. Ayala Botto, J. Sá da Costa, “State observers in a feedback
linearized experimental swinging crane system'', In Proceedings of the 5th
Portuguese Conference on Automatic Control, pp. 61-66, Aveiro, Portugal, 2002.
402. J.A. Borges, M. Ayala Botto, J. Sá da Costa, “Approximate input-output feedback
linearization for the swinging crane system using a state observer'', In Proceedings
of the 10th Mediterranean Conference on Control and Automation, 9 pages, Lisbon,
Portugal, 2002.
79
403. S. Bueno, J. Azinheira, J. Ramos, E. de Paiva, P. Rives, A. Elfes, J.R. Carvalho, G.
Silveira, "Project AURORA: Towards an Autonomous Robotic Airship", IROS
2002 Workshop on Aerial Robotics, Lausanne, Switzerland, Sep 2002, pp 43-53.
404. J. M. F. Calado, M. J. G. C. Mendes, J. M. G. Sa da Costa, J. Korbicz, “ Neuro and
Neuro-fuzzy Hierarchical Structures Comparison in FDI: Case Study”, Proceedings
15th World Congress of the International Federation of Automatic Control,
IFAC'2002, Session T-We-M04, pp. 1-6, Barcelona, Spain, July 2002.
405. J. M. F. Calado, M. Kowal, M. J. G. C. Mendes, J. Korbicz, J. M. G. Sa da Costa,
“Neuro-Fuzzy Fault Detection Approach using a Profibus Network”, In
Proceedings of the 10th Mediterranean Conference on Control and Automation, 10
pages, Lisbon, Portugal, 2002.
406. J.R. Caldas Pinto, Pina, P., Ramos V., Ramalho M., “Clustering Techniques for
Marbles Classification”, Proceedings of 12th Portuguese Conference on Pattern
Recognition RecPad 2002, (CD edition), Aveiro, Portugal.
407. J.R. Caldas Pinto, João M.C. Sousa, “Comparision of Fuzzy Clustering and
quadtree Methods Applied to Color Segmentation”, Proceedings of 12th Portuguese
Conference on Pattern Recognition RecPad 2002, (CD edition), Aveiro, Portugal,
June 2002.
408. F. M. Campos, J. M. G. Sá da Costa and J. M. F. Calado, “A Study on Impedance
Selection for Robot Force Control”, Proceedings of Controlo 2002, 5th Portuguese
Conference on Automatic Control, University of Aveiro, September 5-7, 2002,
409. S.P. Fernandes, L.F. Baptista and J.M.G. Sá da Costa. "Real-time force control
experiments with an industrial PUMA robot manipulator", Proceedings of Controlo
2002 5th Portuguese Control Conference, 5-7 September 2002, Aveiro, Portugal
410. P.A. Ferreira, F. Morais, J. Costa, J.R. Caldas Pinto , “2D Visual Servoing for a
PumaRobot”, Proceedings of Controlo 2002, 5th Portuguese Conference on
Automatic Control, University of Aveiro, September 5-7, 2002, pp 189-194
411. P. Gonçalves, J.R. Caldas Pinto, “2½D Visual Servoing Applied to a Planar Robot”
Proceedings of Controlo 2002, 5th Portuguese Conference on Automatic Control,
University of Aveiro, September 5-7, 2002, pp 183-188.
412. P. Gonçalves, P. Ferreira, P. Pinto, A. Oliveira, G. Brito, L. Pina, J. Pinto,
“Comparing Visual Servoing Architectures For a Planar Robot”, Proceedings of
10th Mediterranean Conference on Control and Automation, (CD edition), Lisbon,
Portugal, July 9-12, 2002.
413. S. Madeira and J. M. Sousa. “Comparison of target selection methods in direct
marketing”. Proceedings of European Symposium on Intelligent Technologies,
Hybrid Systems and their Implementation on Smart Adaptive Systems, Eunite'2002,
pp.333-338, Albufeira, Portugal, September 2002.
414. S. J. C. Marques and Sá da Costa, José M. G., “Integrating fuzzy adaptive and fuzzy
robust force and position control of robot manipulators”. Proceedings of the 15th
World Congress of IFAC-International Federation of Automatic Control, pp,
Barcelona – Spain, July 20-27, 2002.
80
415. S. J. C. Marques and Sá da Costa, José M. G., “Recovering the Force/Position
Control Performance Under Uncertainties Using a Fuzzy Integrating Approach”.
Proceedings of the 5th Portuguese Conference on Automatic Control, pp. 329-334,
Aveiro - Portugal, September 5-7, 2002.
416. S. J. C. Marques and Sá da Costa, José M. G., “Compensating for Uncertainties on
Force Control: an integrated approach". Proceedings of the 10th Mediterranean
Conference on Control and Automation – Instituto Superior Técnico, July 9-12,
2002, Lisboa-Portugal.
417. M. Mendes, M. Kowal, J. Calado, J. Korbicz, and J. Sa da Costa, “Fault Isolation
Approach Using a PROFIBUS Network: A Case Study”. Proceedings 5th
Portuguese Conference on Automatic Control, Controlo'2002, pp.525-530, Aveiro,
418. M. Mendes, M. Kowal, J. Korbicz, and J. Sa da Costa, “Neuro-fuzzy Structures in
FDI Systems”, Proceedings 15th World Congress of the International Federation of
Automatic Control, IFAC'2002, Session T-We-M04, pp. 1-6, Barcelona, Spain, July
2002.
419. M. Mendes, J. Calado and J. Sa da Costa, “Pruning Algorithm Applied to a
Hierarchical Structure of Fuzzy Neural Networks: Case Study”, MMAR 2002.
420. L. F. Mendonça, J. M. Sousa and J.M.G. Sá da Costa. Comparison of classical and
fuzzy multi-variable control. Proceedings 5th Portuguese Conference on Automatic
Control, Controlo'2002, pp.19-24, Aveiro, Portugal, September 2002.
421. L. F. Mendonça, J. M. Sousa, U. Kaymak and J.M.G. Sá da Costa. Fuzzy objective
functions in multivariable predictive control. Proceedings of 10th Mediterranean
Conference on Control and Automation, MED'2002, Session WP 4-1, pp. 1-10,
Lisbon, Portugal, July 2002.
422. L. J. Nunes, L.F. Baptista, J.M. Sousa and J. M. G. Sá da Costa. Generation of
virtual trajectories in robot force control using neural networks. Proceedings of 10th
Mediterranean Conference on Control and Automation, MED'2002, Session THA
7-5, pp. 1-10, Lisbon, Portugal, July 2002.
423. A. Silva, T.A. Runkler and J. M. Sousa. Evolved ant colonies optimization in the
scheduling of logistic processes. Proceedings of 12th GMA-GI-Workshop FuzzySysteme 2002, pp.1-6, Dortmund, Germany, November 2002.
424. C. A. Silva, T.A. Runkler, J. M. Sousa and R. Palm. Ant colonies as logistic
processes optimizer. Proceedings of Third International Workshop no Ant
Algorithms, ANTS'2002, pp.76-87, Brussels, Belgium, September 2002.
425. C. A. Silva, J. M. Sousa, T. A. Runkler and J. M. G. Sá da Costa. A multi-agent
dispatching heuristic for manufacturing systems using ant colonies. Proceedings of
European Symposium on Intelligent Technologies, Hybrid Systems and their
Implementation on Smart Adaptive Systems, Eunite'2002, pp.63-68, Albufeira,
426. C. A. Silva, J. M. Sousa, T. A. Runkler, R. Palm and J.M.G. Sá da Costa.
Scheduling in manufacturing systems using ant colonies optimization algorithms.
81
Proceedings 5th Portuguese Conference on Automatic Control, Controlo'2002,
pp.434-439, Aveiro, Portugal, September 2002.
427. C. A. Silva, T. A. Runkler, J. M. Sousa and R. Palm. Optimization of logistic
processes using ant colonies. Proceedings of Agent-Based Simulation 3, Session:
Military, Logistics and Manufacturing, pp. 1-6, Passau, Germany, April 2002.
428. G.F. Silveira, J.R.H. Carvalho, P. Rives, J. R. Azinheira , S.S. Bueno and M.K.
Madrid, "Optimal Visual Servoed Guidance of Outdoor Autonomous Robotic
Airships", American Control conference, ACC2002, Anchorage, USA, May 2002,
pp779-784
429. J. M. Sousa, C. A. Silva and J.M.G. Sá da Costa. Fuzzy active noise modeling and
control of enclosures. Proceedings 15th World Congress of the International
Federation of Automatic Control, IFAC'2002, Session T-We-M04, pp. 1-6,
Barcelona, Spain, July 2002.
430. J.M. Sousa, U. Kaymak and S. Madeira. A comparative study of fuzzy target
selection methods in direct marketing. Proceedings of 2002 IEEE World Congress
on Computational Intelligence, WCCI'2002, FUZZ-IEEE'2002, Paper 1251, pp. 1-6,
Hawaii, USA, May 2002.
431. J.M. Sousa, R. Palm, C.A. Silva and T.A. Runkler. Fuzzy optimization of logistic
processes. Proceedings of 2002 IEEE World Congress on Computational
Intelligence, WCCI'2002, FUZZ-IEEE'2002, Paper 1257, pp. 1-6, Hawaii, USA,
May 2002.
432. Valério and J. Sá da Costa. Time-Domain Implementations of Non-Integer Order
Controllers, Proceedings 5th Portuguese Conference on Automatic Control,
Controlo'2002, pp.353-24, Aveiro, Portugal, September 2002.
433. P. Vieira, J. R. Caldas Pinto, “A classification method for ancient hand-written
musical symbols”, Proceedings of 12th Portuguese Conference on Pattern
Recognition RecPad 2002, (CD edition), Aveiro, Portugal.
434. Pimentel C. and Cravo M.R., “Extending SnePSwD with Permissive Belief
Revision”, in Conceptual Structures, Integration and Interfaces – Proc. of the 10th
International Conference on Conceptual Structures, ICCS 2002, Priss U, Corbett D.
and Angelova G. (eds.), pp. 271-284, Lecture Notes in Artificial Intelligence 2393,
Heidelberg, Germany: Springer-Verlag, 2002.
435. Pinto H.S. e Martins J.P., “Evolving Ontologies in Distributed and Dynamic
Settings”, Proc. KR 2002, Eighth International Conference on Principles of
Knowledge Representation and Reasoning, pp. 365-374, San Francisco, CA:
Morgan Kaufmann Publishers, 2002.
436. H. Sofia Pinto, Duarte Nuno Peralta e Nuno J. Mamede, “Using Protégé-2000 in
Reuse Processes”, Proc. EON 2002, SIG3 Workshop at the 13th International
Conference on Knowledge Engineering and Knowledge Management, 2002.
437. Martins J.P., Morgado E.M. e Haugen R., “TPO: A System for Scheduling and
Managing Train Crew in Norway”, Proc. of the Annual Conference on Innovative
Applications of Artificial Intelligence, Publicação galardoada com o prémio
82
`Ìnnovative Application Award” pela American Association for Artificial
Intelligence.
438. Xiong S., Rodrigues J. M. C. E Martins P. A. F., “Simulation of Plane Strain
Rolling Using the Element Free Galerkin Method”, ICFG – 2nd. Workshop on
Process Simulation in Metalforming Industry, Padua, Itália, 2002.
439. Fernandes J. L. M., Rodrigues J. M. C. E Martins P. A. F., “Thermo-Mechanical
Analysis of Metal Forming Processes Through a Combined Finite ElementBoundary Element Approach”, BEM24 and MESH2002 International Conference,
Sintra, 2002.
440. Alves, L. M. M., Rodrigues, J. M. C. E Martins, P. A. F., “Simulação Numérica de
Componentes para a Indústria Automóvel Obtidos por Forjamento de Sinterizados”,
V Cong. Métodos Numéricos en Ingenieria, Madrid, 2002.
441. Brito A. M. G., Schaeffer L.,Rodrigues J. M. C. E Martins P. A. F., “Utilização de
Simulações Numéricas Termo-Mecânicas no Estudo de Componentes Forjados”, V
Cong. Métodos Numéricos en Ingenieria, Madrid, 2002.
442. Rodrigues J. M. C. E Martins P. A. F., “Interacção entre a Simulação Numérica dos
Processos de Fabrico e as Características Tecnológicas das Máquinas-Ferramenta”,
V Cong. Métodos Numéricos en Ingenieria, Madrid, 2002.
443. Alves M. L., Rodrigues J. M. C. E Martins P. A. F., “Simulação Numérica e
Experimental do Fabrico de Pré-Formas Destinadas a Operações de Forjamento”, V
Cong. Métodos Numéricos en Ingenieria, Madrid, 2002.
444. Brito A. M. G., Schaeffer L., Rodrigues J. M. C. E Martins P. A. F., “Simulação
Termo-Mecânica de Componentes Forjados : Reflexões em Torno de um Caso
Concreto”, Anais do XXII SENAFOR, Gramado, Brasil, 2002.
445. Alves L. M. M., Rodrigues J. M. C. E Martins P. A. F., “Utilização do Programa
IFORM2 para a Simulação Numérica do Forjamento de Pré-formas Sinterizadas”,
Anais do XXII SENAFOR, Gramado, Brasil, 2002.
446. José Filipe C. P. Antunes Simões, Eduardo M. Rocha, Rui Oliveira Baptista,
Optimising Tapping Operations on Hardened Steels in a Prototyping Environment,
3rd Conference on Rapid prototyping, Tooling and Manufacturing, CRDM, High
Wycombe, Inglaterra, pp. 55 - 62, 2002, ISBN 1 86058 374 1.
447. Rui M.S.O. Baptista, M. Beatriz. C.J. Silva, Theoretical and Experimental Analysis
of the Multi-Step Forming of a rear seat part, IDDRG, Japan, 2002.
448. L. Quintino “International Education, Qualification and certification Systems in
Welding”, “10th Anniversary of RWS International Conference, Welding-QualityCompetitiveness”, Mockba, Moscow, pp. 26, October 2002.
449. A. Costa, L. Quintino “Características de la Unión entre Metales Duros Y Acero
Soldada com Láser”, “14as Jornadas Técnicas de Soldadura, 25º AniversárioCESOL”, Madrid, Spain, pp. 39-46, June 2002.
83
450. N. Pedrosa, L. Quintino “Thin Sheet Welding with Diode Laser and Plasma
Processes”, “Annual Assembly of IIW 2002, Copenhagen, Denmark, DOC IIW
XII-1700-02, pp. 380-391, June 2002.
451. José M. G. Carvalho Ferreira, Artur J. Santos Mateus, Simulation and
Analysis of Fracture in Laser Stereolithography Patterns and in Ceramic
Shells for Investment Casting, proceedings of 1st International Materials
Symposium, book “Key Engineering Materials – Advanced Materials Forum I”,
Trans Tech Publications Inc., ISBN: 0-87849-905-9, vol. 230-232, USA, 2002, p.p.
259-262.
452. José M. G. Carvalho Ferreira, Paulo S. Bártolo, Nuno F. Alves, B. Ventura,
N.F. Ferreira, Reverse Engineering for Rapid Prototyping of Automotive
Components,
proceedings
“47.
Internationales
Wissenschaftliches
Koloquium - IWK”, CD-ROM (ISSN 1619-4098), Production and Logistics,
TUI - Technical University of Ilmenau (Thür), ISSN 0943-7207, Germany, 2002,
p.p.441-442.
453. José M. G. Carvalho Ferreira, Paulo S. Bártolo, Nuno F. Alves,
Development of an Efficient Method to Integrate Reverse Engineering with
Rapid Prototyping for Medical Implants, proceedings of “47. Internationales
Wissenschaftliches Koloquium - IWK”, CD-ROM (ISSN 1619-4098),
Measurement and Sensor Technology, TUI - Technical University of Ilmenau
(Thür), ISSN 0943-7207, Germany, 2002, p.p.532-533.
454. Nuno M. Alves, Paulo J. S. Bártolo, José M. G. Carvalho Ferreira, Image-based
Modelling for Reverse Engineering of Large Objects, proceedings of ICMA 2002 International Conference On Manufacturing Automation, Design Systems and
Methodologies, Professional Engineering Publishing and University Hong Kong,
ISBN 1-86058-376-8, Hong Kong, China, 2002, p.p. 91-98.
455. L. Maltez, V.Varela, Can a Virtual Park Become a Real S&T Park?, XIX
conferência Mundial de Parques de Ciência e Tecnologia da IASP, Quebec,
Canadá, 2002.
456. L. Maltez, O taguspark e o movimento Português de Parques de Ciência e
Tecnologia, Seminário do IMADE “Infraestrucutura de la Cienca y la Tecnologia”,
Madrid, Espanha, 2002.
457. L. Maltez, Taguspark – Lisbon – Portugal: A public-private self-sustainable STP,
launched by Government initiative, Conferência Europeia de Parques de Ciência e
Tecnologia da IASP, Tallinn, Estónia, 2002.
458. A.F. de O. Falcão, “First-generation devices for ocean wave energy utilization: an
assessment of the technology”, International Conference on New and Renewable
Energy technologies for Sustainable Development, Ponta Delgada, Azores,
Portugal, June 2002.
459. P.A.P. Justino, A.F. de O. Falcão, “Hydrodynamic interactions for small arrays of
wave energy devices”, 21st International Conference on Offshore Mechanics and
Arctic Engineering, Oslo, Norway, June 2002, Paper No. 28288.
84
460. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, “An Efficient Finite Volume Scheme
with Improved Artificial Viscosity Suitable for Transonic-Flow Calculations”,
Proceedings of the Fourth International Conference on Advances in Fluid
Mechanic, Ghent, M. Rahman, R. Verhoeven & C. A. Brebbia (Eds.), WIT Press,
pp. 504-514, 2002.
461. J. C. C. Henriques, L. M. C. Gato, “A Multi-Dimensional Upwind Matrix
Distribution Scheme for Conservative Laws”, AMIF2002 - Third International
Conference on Applied Mathematics for Industrial Flow Problems, pp. 1-20, 2002.
462. Rodrigues, J., T. Domingos, P. Conceição, J. Belbute (2002). Sustainable
development: constraints on dematerialisation and allocation of natural capital.
Proceedings of the 7th Biennial Conference of the International Society for
Ecological Economics, Sousse, 6–9 Março (CD-ROM).
463. Pereira, M., S. Serrano, A. Simões, T. Domingos (2002). Comparative economic
and ecological evaluation of intensive, extensive and organic production of meat
and dairy products. In F. J. Villalobos, L. Testi (eds.), VII Congress of the European
Society for Agronomy, Córdoba, Spain, 15-18 July 2002, pp. 573-574.
464. Serra, L., P. Canaveira, T. Domingos, J. Domingos, A. Simões (2002). Ecological
economic analysis of agriculture: A methodological development and a case study.
In F. J. Villalobos, L. Testi (eds.), VII Congress of the European Society for
Agronomy, Córdoba, Spain, 15-18 July 2002, pp. 581-582.
465. Vieira, R. F., T. Domingos, P. Canaveira, A. Simões (2002). Comparative
ecological economic evaluation of eucalyptus and industrial hemp papers. In F. J.
Villalobos, L. Testi (eds.), VII Congress of the European Society for Agronomy,
Córdoba, Spain, 15-18 July 2002, pp. 591-59Simões, A., L. Serra, P. Canaveira, T.
Domingos (2002). Ecological economic analysis of agriculture: a methodological
development and a case study. In Proceedings of “Advances in Energy Studies:
Reconsidering the Importance of Energy”, Porto Venere, Italy, 24-28 September
2002 (in press).
466. Rodrigues, J., T. Domingos (2002). The EKC and the rebound effect in a
microeconomic model subject to physical constraints. In Proceedings of “Advances
in Energy Studies: Reconsidering the Importance of Energy”, Porto Venere, Italy,
24-28 September 2002 (in press).
467. Sousa, J.M.M., Ferreira, O.D.C.S., Fundanga, B.M.M.(2002) On Ice Blockage of
Vent Tubes in the Wing Fuel Tanks of the "Epsilon" Aircraft, Twenty-Third
Congress of the International Council of the Aeronautical Sciences, Toronto
(Canada), September 8-13, ICAS 02-7.3.3, paper 415 (published in CD-ROM, Eds.,
ICAS, AIAA) Download PDF (448 kB)
468. Melo, M.J, Sousa, J.M.M., Costa, M.(2002) PDA Measurements of Single-Point
Injection in Crossflow, Eleventh International Symposium on Applications of Laser
Techniques to Fluid Mechanics, Lisboa (Portugal), July 8-11, paper 28.5 Download
PDF (not yet available)
469. Sousa, J.M.M. (2002) Using Meso-Scale Modelling for the Prediction of Wind
Resources in Portugal, International Conference on New and Renewable
85
Technologies for a Sustainable Development, Ponta Delgada (Portugal), June 2426, paper 8.3 (published in CD-ROM)
470. N. P. C. Marques and J. C. F. Pereira (2002). “Comparação de diversas técnicas
de Précondicionamento no contexto de Métodos sem Matriz e Escoamento de
Fluido CompressíveL”. V Congreso Internacional de Métodos Numéricos en
Ingeniería (SEMNI), 3-6 June, Madrid.
471. Barreiros, A.: “Modelling the Instantaneous Temperature Fluctuations in Turbulent
Non-Premixed Flames” V Congreso Métodos Numéricos en la Inginieria, Madrid,
3-6 de June, International Center for Numerical Methods in Engineering (ed.),
2002.
472. Barata, J. and Durão, D., (2002), “Laser-Doppler measurements of impinging jet
flows through a cross-flow”, Proceedings of the 11th International Symposium of
Laser Technologies Applied to Fluid Mechanics, paper-32-2, July, Lisbon,
Portugal.
473. Carla M. Silva, Tiago L. Farias & José M. C. Mendes-Lopes, “EcoGest Numerical modelling of the dynamic, fuel consumption and tailpipe emissions of
vehicles equipped with spark ignition engines”, Eighth International Conference on
Urban Transport and the Environment in the 21st Century, Sevilha, March de 2002.
474. Costa, M., Coelho, L. M. R., Ferro, L. and Casaca, C. “On the co-combustion of
natural gas and biomass in a large-scale laboratory furnace”, Proceedings of the
International Conference on New and Renewable Energy Technologies for
Sustainable Development, Ponta Delgada, S. Miguel Island, Azores, Portugal, 2426 June. (2002).
475. Costa, M., Silva, P. and Azevedo, J. L. T., “Measurements of gas species,
temperature and char burnout in a low-NOx pulverized-coal-fired utility boiler”.
Poster apresentado no 29th International Symposium on Combustion, Sapporo,
Japão, 21-26 July. (2002).
476. Costa, G. Gonçalves, N. Duić, M.G. Carvalho, “End-Use Versus Supply Side
Approach for GHG Reduction in SIDS. Case Study: Cape Verde Islands”, CD Proc.
of the International Conference on New and Renewable Technologies for
Sustainable Development, Ponta Delgada, Azores, 17 pp. (2002)
477. Dias, J., Costa, M. and Azevedo, J. L. T., “Test of a small domestic boiler using
different pellets”, First World Conference on Pellets. Estocolmo, Suécia, 2-7
September. (2002).
478. Durão, D., Maltez, L., Sarmento, M. and Varela, V., (2002), “Management of
Virtual and Real Science and Technology Parks”, Proceedings of the 6th
International Conference on Technology Policy and Innovation, August, Kansai,
Japan.
479. Ferro, L., Coelho, L. M. R., Casaca, C. and Costa, M., “Simulação numérica da cocombustão de biomassa e gás numa fornalha semi-Industrial”, V Congreso de
Métodos Numéricos en Ingeniería Y Ciencias Aplicadas, Madrid, Espanha, 3-6
June. (2002).
86
480. Farias, T.L., “Fuel cell bus Berlin, Copenhagen and Lisbon, “A sustainable and
environmental technology for the urban passenger transportation sector”, Eighth
International Conference on Urban Transport and the Environment in the 21st
Century, Sevilha, March de 2002.
481. H. Cavaca, M. Caldas e V. Semião, “Polar sub-superficial habitation modules:
numerical modelling of heat transfer”, Proceedings of 1st International Conference
on Heat Transfer, Fluid Mechanics and Thermodynamics, Kruger Park, África do
Sul, 2002
482. Jardim, A. and Barreiros, A.,“Modelação do Comportamento Térmico de
Edifícios”, V Congreso Métodos Numéricos en la Inginieria, Madrid, 3-6 de June,
International Center for Numerical Methods in Engineering (ed.), 2002.
483. J. Esteves, F. Vale, N. Teixeira, I. Santos, P. Matos, T. Farias, R. Stüssi (2002)
"Hybrid Electric Buses: Dimensioning the Intermediate Electric Storage Stage,
Actas do "Electrimacs 2002, 7th International Conference on Modelling and
Simulation of Electric Machines, Converters and Systems", 18 a 21 de August de
2002, Montreal, Canadá.
484. J. Ströhle, P.J. Coelho, U. Schnell e K.R.G. Hein, “A Non-Grey Radiation Model
for the Simulation of Coal-Fired Furnaces”, 6th European Conference on Industrial
Furnaces and Boilers, Vol. 3, Estoril, 2-5 de April (2002).
485. J.E.Ramos; R.A:Pitarma; M.G:Carvalho, “Thermal and Environmental Simulation
of Buildings”, Coimbra: XXX IAHS World Congress on Housing, pp. 1537- 1544,
9 a13 September 2002
486. J.E.Ramos; N.A.Martinho; R.A:Pitarma; M.G:Carvalho, “Three-Dimensional
Natural Convection in Rooms Connected to the Outside Through Large Openings.”
Copenhagen: 8th International Conference on Air Distribution in Rooms, pp. 609612, 8 a 11 September 2002
487. M. Baburić, Ž. Bogdan, N. Duić, “A New Approach to CFD Research: Combining
AVL's Fire Code with User Combustion Model”, Proc. of the 24th International
Conference Information Technology Interfaces, Cavtat, 383-388 (2002)
488. M. Caldas e V. Semião, “Um novo modelo para a função de fase de partículas
esféricas de grandes dimensões”, Proceedings do V Congreso de Métodos
Numéricos en Ingeniería, Madrid, Espanha, 2002
489. M. Caldas e V. Semião, “Mean absorption coefficient for non-grey, non-scattering
media and their application to inhomogeneous environments”, Proceedings of the
2nd International Mediterranium Combustion Symposium, Sharm El-Sheikh, Egipto,
2002
490. Melo, M. J., Sousa, J. M. M. and Costa, M., “PDA measurements of single-point
injection in crossflow”. 11th International Symposium on Application of Laser
Techniques to Fluid Mechanics, Lisboa, Portugal, 8-11 July. (2002).
491. N. Duić, F. Juretić, M. Zeljko, Ž. Bogdan, “Kyoto Protocol Objectives in Croatia
Energy Planning: Nuclear Scenario”, Proc. of the 4th International Conference
87
Nuclear Option in Countries with Small and Medium Electricity Grids, Dubrovnik,
10 pp. (2002)
492. N. Duić, T. Jureković, M.G. Carvalho, Z. Bogdan, “Comparison of Liberalization
of Electricity Market in Portugal and Croatia” (in Croatian), Proc. of the 5th Int.
symposium Power and Process Plants, Dubrovnik, 10 pp. (2002)
493. Naim H. Afgan, “Sustainability Assessment of Material Sciences and Technology”,
12th Islamic Academy of Science Conference, Islamabad, Oct.14-18,2002
494. Naim H. Afgan, “Sustainability Assessment of Energy, Water and Environment
Systems”, Dubrovnik Conference on Sustainable Development of Energy, Water
and Environment Systems, Dubrovnik, June 3-7,2002
495. Naim H. Afgan, Maria G. Carvalho, “Multi-criteria Assessment of Thermal Energy
Systems”, International Heat Transfer Conference, Grenoble, August 18-24,2002
496. N. Duić, L.M. Alves, M.G. Carvalho, “Optimising the Integration of Hydrogen
Usage with Intermittent Energy Sources”, CD Proc. of the International Conference
on New and Renewable Technologies for Sustainable Development, Ponta Delgada,
Azores, 15 pp. (2002)
497. N.A.Martinho; J.E.Ramos; M.C.G.Silva, “Thermal Environment in the Cabin of a
Multipurpose Vehicle”. Copenhagen: 8th International Conference on Air
Distribution in Rooms, pp. 637-640, 8 a 11 September 2002
498. O. Silva e P.J. Coelho, “Numerical Simulation of a Natural-Gas-Fired Combustion
Chamber”, 6th European Conference on Industrial Furnaces and Boilers, Vol. 3,
Estoril, 2-5 de April (2002).
499. P. Rei, J.P. Fonseca, N. Duić, M.G. Carvalho, “Integration of Renewable Energy
Sources and Hydrogen Storage in the Azores Archipelago”, CD Proc. of the
International Conference on New and Renewable Technologies for Sustainable
Development, Ponta Delgada, Azores, 24 pp. (2002)
500. Simões, A., Coelho, M., Silva, C. e Farias, T.L., “Analysis of Environmental
Impact of Urban Buses: Application to a Case Study in Lisbon”, Eighth
International Conference on Urban Transport and the Environment in the 21st
Century, Sevilha, March de 2002.
501. P.J. Coelho, “Evaluation of a Model for Turbulence/Radiation Interaction in Flames
using a Differential Solution Method of the Radiative Transfer Equation”, 12th Int.
Heat Transfer Conference, Grenoble, França, 18-23 de August (2002).
502. P.J. Coelho, “Aplicação de um Esquema de Discretização Genuinamente
Multidimensional na Resolução de Equações de Transporte”, V Congreso de
Métodos Numéricos en Inginiería, Madrid, 3-6 de June (2002).
503. P. A. Lima, João Ramos, A. S. Pouzada, “Thermal Performance of hybrid injection
moulds with epoxy moulding inserts” Marinha Grande: RPD 2002 – Advanced
Solutions and Development, September 2002.
504. Sarmento, M. e Durão, A. (2002), “Best Practices – A Management Model for
Occupational Heath”, 1St International Conference on Best Practices in
88
Occupational Safety and Health Education, Training and Communication, October,
Carolina do Norte, EUA.
505. Sarmento, M. e Durão, A. (2002), “Management and Workplace Health
Promotion”, European Conference on Promoting Workplace Health: Healthy
Workplaces Towards Quality and Innovation, June, Barcelona, Espanha.
506. Sarmento, M., Duarte, M. e Durão, D. (2002), “Study of Environmental
Sustainability: The Case of Portuguese Polluting Industries”, International
Conference on Sustainable Development of Energy, Water and Environment
Systems, June, Dubrovnik, Croatia.
507. Sarmento, M. e Duarte, M. (2002), “Accounting Harmonization of Environmental
Facts”, 25th International Congress on Accounting, April, Copenhaga, Dinamarca.
508. Sarmento, M., Rocha, D. e Amado, A. (2002), "Strategic Implications of
E-Innovation in Competitiveness and Sustainability”, 6th International Conference
on Technology, Policy and Innovation, August, Kansai, Japão.
509. Sarmento, M. e Duarte, M. (2002), “Ambiente e Contabilidade Financeira”, XII
Jornadas Luso-Espanholas de Gestão Científica, April, Covilhã, Portugal.
510. Sarmento, M., Duarte, M., Santos, C. and Durão, D., (2002), “Environmental
Impact and Sustainable Tourism in Azores Island”, Proceedings of the International
Conference on New and Renewable Energy Technologies for Sustainable
Development, June, Ponta Delgada, Azores, Portugal.
511. Sarmento, M., Duarte, M. and Durão, D., (2002), “Análise de Grupos Estratégicos
de Empresas Portuguesas face ao Ambiente”, Proceedings of the XII Jornadas
Luso-Espanholas de Gestão Científica, April, Covilhã, Portugal.
512. Abrantes J, “Methodological Approach of Ground Reaction Forces Analysis”
(Keynote lecture), Biomechanics of Man, F Vaverka and M Janura, (Eds.), Palacky
Un., Olomouc, Czech Republic, November 24-25 2000.
513. Ambrósio J, Silva M, “Metodologias de Análise Por Dinâmica Inversa: Relação
Entre A Qualidade Dos Dados e Resultados”, Simpósio Treino e Avaliação de
Força e Potência Muscular, Instituto Superior da Maia, Maia, Portugal, November
29 – December 1, 1999.
514. Ambrósio J, “An Integrated Finite Element And Multibody Method For Frontal
And Oblique Vehicle Impact Analysis”, 2nd European Conference on
Computational Mechanics, Cracow, Poland, June 26-29, 2001.
515. Ambrósio J, Lopes G, Costa J, “Estudo da Reorientação do Corpo Humano em
Trajectórias Aéreas Utilizando Controlo Descentralizado e Hierárquico”. In
Proceedings of the VI Encontro de Mecânica Computacional, (Paulo Vila Real and
José Grácio, Eds.), Aveiro, Portugal, April 17-19, 1295-1306, 2000.
516. Ambrósio J, Lopes G, Costa J, “Human Spatial Attitude Control by Means of Zero
Momentum Turns”, DYCONS99 – 1999 IEEE International Symposium on
Dynamics and Control of Multibody Systems, Chateu Laurier, Ottawa, Canada,
August 5-7, 1999.
89
517. Ambrósio J, Abrantes J, Lopes G, “Spatial Reconstruction of the Human Motion
Using a Single Camera and the Kinematic Equations of The Biomechanical
Model”. In Proceedings of the VI Encontro de Mecânica Computacional, (Paulo
Vila Real and José Grácio, Eds.), Aveiro, Portugal, April 17-19, 273-284, 2000.
518. Ambrósio J, Gonçalves J, “Complex Flexible Multibody Systems With Application
to Vehicle Dynamics”, In Proc. of EUROMECH Colloquium on Advances in
Computational Multibody Dynamics, Lisbon, Portugal, September 20-23, 1999
519. Ambrósio J, Figueiras L, Luz L, Homem P, “Cinemática de Composições
Ferroviárias Incluindo a Sua Inserção em Curva”. In Proceedings of the VI
Encontro de Mecânica Computacional, (Paulo Vila Real and José Grácio, Eds.),
Aveiro, Portugal, April 17-19, 1283-1294, 2000.
520. Ambrósio J, Silva M, Lopes G, “Reconstrução Do Movimento Humano E Dinâmica
Inversa Utilizando Ferramentas Numéricas Baseadas Em Sistemas Multicorpo”, in
Proceedings of Métodos Numéricos En Ingeniería, Sevilha, Spain, June 7-10, 1999.
521. Ambrósio J, Silva M, Abrantes J, “Inverse Dynamic Analysis of Human Gait Using
Consistent Data”, In Computer Methods in Biomechanics and Biomedical
Engineering – 3 (J. Middleton, M. Jones, N. Shrive and G. Pande, Eds.), Lisboa,
Portugal, October 13-16, 275-282, 1999.
522. Ambrósio J, Pedersen S e Hansen J, “A Contact Model For The Roller And
Sprocket Engagement In Roller-Chain Drives”, In Proceedings of the 2nd European
Conference on Computational Mechanics, Cracow, Poland, June 26-29, 2001.
523. Ambrósio J, Dias J e Cunha H, “Mathematical Models for Energy Management in
Train Crashworthiness”, Vehicle Infrastructure Interaction VI, Zakopane, Poland,
26 de Setembro-1 Outubro, 1999.
524. Araújo A, Soares C M, Silva A & Moreira de Freitas M, "Identificação de
Propriedades Mecânicas de Estruturas Laminadas Multimateriais”. Actas do VI
Congresso Nacional de Mecânica Aplicada e Computacional, Simpósio de
Materiais Compósitos, Ed. Paulo Vila Real et al, D.E.C., Universidade de Aveiro,
17 a 19 de Abril, 2000.
525. Araújo A, Soares C M, Moreira de Freitas M, Herskovits J, “Método NuméricoExperimental para Identificação de Propriedades Mecânicas de Estruturas
Laminadas Multimateriais”, Análise Experimental de Tensões e Mecânica
Experimental, 4º Encontro Nacional, Instituto Politécnico de Bragança, Outubro
2001.
526. Barbosa J & Reddy J, “Supressão de Vibrações em Compósitos Laminados com
Camadas Magnetoestrictivas”, Proc. VI Congresso Nacional de Mecânica Aplicada
e Computacional, Ed. P.M.M. Vila Real e J.J. Grácio, Universidade de Aveiro,
Secção Autónoma de Engenharia Civil, I, 411-421, 2000.
527. Correia I, Soares C M, Soares C A, "Análise de Cascas Axissimétricas com
Lâminas Piezoeléctricas”. Actas do VI Congresso Nacional de Mecânica Aplicada e
Computacional, Simpósio de Materiais Compósitos, Ed. Paulo Vila Real et al,
D.E.C., Universidade de Aveiro, 17 a 19 de Abril, 2000.
90
528. Correia I, Soares C M & Soares C A, “A Semianalytical Higher Order Model:
Piezolaminated Axisymmetric Shells”, Computational Techniques for Materials,
Composites and Composite Structures, Ed. B.H.V. Topping, Civil-Comp Press,
Edinburgh, Scotland, 281-290, 2000.
529. Correia (I.F. Pinto), & Soares C A, “Analysis of Piezolaminated Axisymmetric
Shells: a Semianalytical Higher Order Model”, Fourth International Colloquium on
Computation of Shells & Spatial Structures, (IASS – IACM2000), Chania-Crete,
Greece, June 4-7, 2000.
530. Correia (I.F. Pinto), Soares C M, & Soares C A, “Piezolaminated Axisymmetric
Shells: Semianalytical Higher Order Models”, Proc. Seventh Annual International
Conference on Composites Engineering, ICCE/7, Ed. David Hui, College of
Engineering, University of New Orleans, B43-B46, 2000.
531. Correia (V.M. Franco), Soares C M, and Soares C A, “ A Numerical Model for the
Optimal Design of Composite Laminated Structures with Piezoelectric Laminae”,
Mathematics and Control in Smart Structures, Ed. By V. V. Varadan, SPIE, The
International Society for Optical Engineering, 3667, 427-437, 1999.
532. Correia (V.M. Franco), Soares C M & Soares C A, “Refined Models for the
Optimal Design of Adaptive Structures”, Proc. 3rd International Conference on
Composite Science and Technology (ICCST/3), Ed. By S. Adali, E.V. Morozov &
V.E. Verijenko, Dept. of Mechanical Engineering, University of Natal, Durban,
South Africa 135-140, January 2000.
533. Costa A, Moniz P, Suleman A, “Adaptive RPV Aeroelastic Demonstrator
Concept”, Proceedings of the IFASD 2001 Forum, June 5-8, Madrid, Spain, 2001.
534. Costa A, Moniz P, and Suleman A, “Design and Testing of an Adaptive RPV
aeroelastic Demonstrator”, 42nd AIAA/ASME/ASCE/AHS Structures, Structural
Dynamics, and Materials Conference, Paper No. AIAA-2001-1361, Seattle, WA,
USA, April 16-19, 2001
535. Costa A, Moniz P and Suleman A, “RPV design issues and integration of a
piezoelectric adaptive wing”, Proceedings Canada-US Cansmart Workshop on
Smart Materials and Structures, 22-23 October 2001, Montreal, Quebec, Canada,
93-104.
536. Dias J e Pereira M, ”Optimal Design of Rigid-Flexible Multibody Systems with
Application to Vehicle Technology”, IV Congresso de Métodos Númericos en
Ingeniería, Sevilla, Spain, 7-10 Junho, 1999.
537. Dias J e Pereira M, ”Optimization Methods for the Design of Rigid- Flexible
Mechanical Systems”, in Proceedings of NATO-ARW - Computational Aspects of
Nonlinear Structural System with Large Rigid Body Motion, Eds. J. Ambrósio e M.
Kleiber, pág 293-512, Pultusk, Poland, 2-7 Julho 2000.
538. Dias J e Pereira M, ”Sensitivity Analysis And Multiload Design Criteria of RigidFlexible Multibody Systems”, in Proceedings of EUROMECH Colloquim, pág.
681-694, Lisboa, Portugal, 20-23 Setembro, 1999.
91
539. Dias J, “Symbolic Computation in Sensitivity Analysis of Rigid-Flexible Multibody
Systems”, First Meeting on Iterative Methods and Symbolic Computation, Instituto
Superior Técnico, Lisboa, Portugal, 26-28 Janeiro 2001.
540. Dias J e Pereira M “Aplicação de Metodologias de Projecto Óptimo de Sistemas
Mecânicos Rígido Flexíveis ao Dimensionamento de Componentes Estruturais de
Veículos”, em actas do 6º Encontro Nacional da Mecânica Computacional, pág.
1091-1100, 2000.
541. Dimitrovová Z, Faria L, “Finite Element Modeling of the RTM Process”, Proc. de
5th International Conference: Flow Processes in Composite Materials, 12-14 de
Julho, 1999, Plymouth, Reino Unido (apresentado pela Z. Dimitrovová).
542. Dimitrovová Z, Faria L, “Novas Tendências na Simulação do Processo de
Fabricação RTM”, acta do VI Congresso Nacional de Mecânica Aplicada e
Computacional, 17-19 de Abril, 2000, Aveiro, Portugal (apresentado pela Z.
Dimitrovová).
543. Dimitrovová Z, Advani S, “A Semi-Analytical Approach to the Relative
Permeability Determination in LCM Processes”, Proc. de 8th International
Conference on Composites Engineering, 5-11 de Agosto, 2001, Tenerife, Ilhas
Canárias, Espanha (apresentado pela Z. Dimitrovová).
544. Fernandes P, Folgado J e Rodrigues H, “Modelos Computacionais e Experimentais
para a análise e projecto de próteses da anca”, 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental,
119-121 , Bragança ,
Portugal, 2001
545. Fernandes P, Folgado J e Miranda P, “Modelos Computacionais para o projecto de
próteses ortopédicas”, VI Congresso Nacional de Mecânica Aplicada e
Computacional, 1, 135-144, Aveiro, Portugal, 2000
546. Fernandes P, Folgado J, Jacobs C and Pellegrini V, “A contact Model with
Ingrowth Control for Bone Remodelling around Cementless Stems”, 12th
Conference of the European Society of Biomechanics, Dublin, Ireland, 150, 2000
547. Fernandes P, Rodrigues H, Jacobs C and Pellegrini V, “A Material Optimisation
Model for Bone Remodelling around Cementless Hip Stems”, European
Conference on Computational Mechanics, ECCM’99, Munich, 1999.
548. Fernandes P, Folgado J, Jacobs C and Pellegrini V, “A Contact Model for Bone
Remodelling on Total Hip Arthroplasty”, IV Int. Symposium on Comp. Meth. in
Biomechanics & Biomedical Engineering, Lisboa , Portugal, , 1999
549. Folgado J, Fernandes P, e Rodrigues H, “Topology Optimization of ThreeDimensional Structures under Contact Conditions”, WCSMO-4; Fourth World
Congress on Structural and Multidisciplinary Optimization, Dalian, China, 2001
550. Gabriel R, Abrantes J, Mourão A, Filipe V, Melo P, Bulas-Cruz J, “Dynamic Joint
Stiffness of the Ankle During Walking Displacement Plane Change”. Gerber Hans
e Müler Roland (Eds). e-Proceedings of XVIII Congress of the International
Society of Biomechanics. Laboratory for Biomechanics ETH Zurich Switzerland.
92
551. Garção J, Soares C M, Soares C A and Reddy J, “Modeling of Adaptive Composite
Structures using Layerwise Theory”, Computational Fluid and Solid Mechanics,
Ed. K. J. Bathe, Elsevier, Amsterdam, 1, 471-472, 2001.
552. Gonçalves J e Ambrósio J, “A Multibody Based Methodology For The Comfort
Optimization of Vehicles”, In Proceedings of the 2nd European Conference on
Computational Mechanics, Cracow, Poland, June 26-29, 2001.
553. Gonçalves J, Ambrósio J, “Advanced Modeling of Flexible Multibody Dynamics
Using Virtual Bodies”, In Proceedings of the NATO-ARW on Computational
Aspects Of Nonlinear Structural Systems With Large Rigid Body Motion,
(Ambrósio J and Michal Kleiber eds.), Pultusk, Poland, July 2-7, 2000.
554. Gonçalves J, Ambrósio J, “Utilização de Corpos Virtuais na Descrição de Sistemas
de Corpos Múltiplos Rígido-Flexiveis”. In Proceedings of the VI Encontro de
Mecânica Computacional, (Paulo Vila Real and José Grácio, Eds.), Aveiro,
Portugal, April 17-19, 931-944, 2000.
555. Guedes J, Rodrigues H and Bendsoe M, “On the Computational Approximation of
Energy Bounds for Multiload Cases with One Level of Microstructure”, Fourth
World Congress od Structural and Multidisciplinary Optimization”, Dalian China,
June 4-8, 2001
556. Hansen J, Ambrósio J, “Dynamics of Roller-Chain Drives”. In Proceedings of the
VI Encontro de Mecânica Computacional, (Paulo Vila Real and José Grácio, Eds.),
Aveiro, Portugal, April 17-19, 1307-1318, 2000.
557. Lage R, Soares C M, and Soares C A, “Development of Finite Elements based on
Walsh Series”, Computational Fluid and Solid Mechanics, Ed. K. J. Bathe, Elsevier,
Amsterdam, 2, 1572-1575, 2001.
558. Lankarani H and Pereira M, “Treatment of impact with Friction in Multibody
Mechanical Systems”. Euromech 404 – Advances in Computational Multibody
Dynamics, J. Ambrósio and W. Schielen (Edrs.), IDMEC/IST, Lisbon, Portugal,
September, 1999.
559. Loja M and Soares C M, “Developments of B-spline Finite Strip Plate/Shell Models
with Integrated Piezoelectric Laminae”, Proc. Eight Annual International
Conference on Composites Engineering, ICCE/8, Ed. David Hui, College of
Engineering, University of New Orleans, Tenerife, Canary Islands, 587-588, 2001.
560. Loja M, Barbosa J & Soares C M, “Analysis of Laminated Composite Panels Using
Semi-Analytical Models”, Proc. 1st International Congress on Maritime
Technological Innovations and Research, UPC Publication Service,
215-225,
1999.
561. Loja M, Barbosa J & Soares C M, “Higher Order B-spline Finite Strip Method for
the Analysis of Laminated Composite Plates”, Proc. ICCE/6, Sixth International
Conference on Composites Engineering, Ed. David Hui, College of Engineering,
University of New Orleans, 597-598, 1999.
562. Loja M, Barbosa J, Soares C M, & Soares C A, “Analysis of Angle-ply
Piezolaminated Plate Structures by Spline Finite Strip Method”, Developments in
93
Analysis and Design using Finite Element Method, Ed. B.H.V. Topping, CivilComp Ltd, Edinburgh Scotland, 107-118, 1999.
563. Madeira J e Rodrigues H, “Implementação da teoria de homogeneização na
optimização de estruturas lineares e elásticas”, 6º Congresso Nacional de Mecânica
Aplicada e Computacional, Paulo Vila real e José J. Gracio (Eds) 1º Volume, 807916, Un. Aveiro, 2000.
564. Martinho A and Pina H, “Wing Optimization by Genetic Algorithms”, RPVs
International Conference, Bristol, 1999.
565. Milho J, Pereira M and Ambrósio J, “Train Crashworthiness Simulations using
Multibody Models”, Euromech 404 – Advances in Computational Multibody
Dynamics, J. Ambrósio and W. Schielen (Edrs.), IDMEC/IST, Lisbon, Portugal,
September, 1999.
566. Milho J, Ambrósio J, Pereira M, “A Multibody Methodology for the Design of
Anti-Climber Devices for Train Crashworthiness Simulation”, In Proceedings of the
ICRASH 2000, International Crashworthiness Conference, (E.C. Chirwa, Ed.),
London, England, September 6-8, 2000.
567. Milho J, Pereira M, Ambrósio J, “Impacto de Composições Ferroviárias Utilizando
Sistemas de Corpos Múltiplos”. In Proceedings of the VI Encontro de Mecânica
Computacional, (Paulo Vila Real and José Grácio, Eds.), Aveiro, Portugal, April
17-19, 919-930, 2000.
568. Miranda P, Guedes J e Rodrigues H, “ Optimization of the interface stiffness in non
cemented hip prosthesis”, Fourth International Symposium on Computer Methods
in Biomechanics and Biomedical Engineering, 13-16 Outubro, Lisboa, Portugal,
1999.
569. Miranda P, Rodrigues H, "Optimização das condições de fixação interfacial da
prótese da articulação da anca ao fémur", IV Congreso de Métodos Numericos en
Ingenieria, Sevilha, 7-10 Junho, 1999
570. Moreira M, Antunes J and Pina H, “An Improved Linear Model for Rotors
Subjected to Dissipative Annular Flows”, Proceedings of the 7th International
Conference on Flow-Induced Vibration, FIV2000, Lucerne, Switzerland, S. Ziada
and T. Staubli (eds), A.A. Balkema, 767-776, 2000.
571. Moreira M, Pina H and Antunes J, “Nonlinear Vibrations of Vertical AsymmetricalSupported Rotors under Fluid Confinement: Theoretical Results”, International
Conference on Fluid Structure Interaction, Greece, Proceedings: Fluid Structure
Interaction, S. K. Chakrabati and C. A. Brebbia (eds.) WIT Press, 2001.
572. Moreira M, Antunes J and Pina H, “A Symbolic--Numerical Method for Nonlinear
Rotor Dynamics under Fluid Confinement”, 2000 Asme International Mechanical
Engineering Congress and Exposition (IMECE 2000), Orlando, Florida,
Proceedings DE-Vol. 108/DSC-Vol. 68, Dynamics, Acoustics and Simulations,
61-68, 2000.
94
573. Moreira M, Antunes J and Pina H, “Analysis of the Nonlinear Orbital Motions of
Immersed Rotors Using a Spectral/Galerkin Approach”, 8^{th} Congress of Sound
\& Vibration ICSV8, Hong-Kong, China, 2001.
574. , H. Rodrigues e Guedes J, “Modelos assimptóticos para análise da estabilidade
linearizada de microestruturas periódicas”, 6º Congresso Nacional de Mecânica
Aplicada e Computacional, Paulo Vila real e José J. Grácio (Eds) 1º Volume, 757766, Un. Aveiro, 2000.
575. Neves M, Rodrigues H e Guedes J, “Projecto de materiais porosos baseado no
método da homogeneização das propriedades”, 6º Congresso Nacional de Mecânica
Aplicada e Computacional, Paulo Vila real e José J. Grácio (Eds) 1º Volume, 333343, Un. Aveiro, 2000.
576. Neves M; Sigmund O; Bendsøe M, “A buckling performance index for topology
design of periodic microstructures”, Proc. of European Congress on Computational
Methods in Applied Sciences and Engineering ECCOMAS 2000, Barcelona, 11-14
September 2000 Barcelona., 2000
577. Pedradas, A., Dimitrovová, Z., Travassos, J., “Simulação Numérica do
Comportamento de Estruturas em Materiais Compósitos”, acta do 4º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental, 17-19 de
Outubro, 2001, Bragança, Portugal (apresentado pelo A. Pedradas).
578. Pedro G, Suleman A, Crawford C and Djilali N, “Computational and experimental
fluid-structure interaction in adaptive undersea vehicles”, 6th Canadian Marine,
Hydrodynamics and Structures Conference, Vancouver, B.C., May 23-25, 2001.
579. Pedro G, Suleman A and Djilali N, “Fluid-Structure Interactions of swimming
propulsion in adaptive undersea vehicles”, Proceedings Canada-US Cansmart
Workshop on Smart Materials and Structures, 22-23 October 2001, Montreal,
Quebec, Canada, 259-270.
580. Pedro G, Suleman A and Djilali N, “Fluid–structure interaction modelling in
adaptive undersea vehicles”, First MIT Conference on Computational Fluid and
Solid Mechanics, June 12-15, Cambridge, MA, USA, 2001.
581. Pereira M and Sohr S, “Passive Safety in Urban Railway Systems”, 2nd
Symposium on Crashworthiness of Rail Vehicles, Berlin, Germany, 2000.
582. Pereira M, European Standard (TC 256, WG 2) – “Crashworthiness Requirements
for Railway Vehicles”, 1st Symposium on Crashworthiness of Rail Vehicles,
Berlin, Germany, 1999.
583. Pereira M, Milho J e Ambrósio J, “Analysis of Overriding Phenomena in Train
Collisions”, In Proceedings of the 2nd International Symposium on Passive Safety
of Rail Vehicles, Berlim, Germany, November 23, 2000.
584. Pereira M, European Standard (TC256-WG2), “Crashworthiness Requirements for
Railway Vehicles, Passive Safety in Rail vehicles” – IFV Bahntechnik, Berlin,
Dezembro de 1999.
95
585. Pombo J, Ambrósio J, Figueiras L, “Modelos Para a Dinâmics de Veículos
Ferroviários”. In Proceedings of the VI Encontro de Mecânica Computacional,
(Paulo Vila Real and José Grácio, Eds.), Aveiro, Portugal, April 17-19, 905-918,
2000.
586. Pombo J, Ambrósio J, Figueiras L, Pereira A, “Models Development for
Applications in Railway Dynamics”, in Proc. Of the 5th ADAMS/Rail Users
Conference, Haarlem, The Netherlands, May 10-11, 2000.
587. Reddy J& Barbosa J, “On Vibration Suppression of Magnetostrictive Beams”,
Smart Materials and Structures, Vol. 9 (1), 49-58, 2000.
588. Rodrigues H, Jacobs C, Guedes J, Bendsoe M, “Global and Local Material
Optimization Models Applied to Anisotropic Bone Adaptation”, in “Synthesis in
Bio Solid Mechanics” Eds. P. Pedersen and M.P. Bendsoe, Kluwer Academic
Publishers, pp 209-220, (1999)
589. Rodrigues H, Guedes J, “Modelos de optimização da microestrutura de materiais
porosos aplicados ao estudo da adaptação óssea”, 6º Congresso Nacional de
Mecânica Aplicada e Computacional, Paulo Vila real e José J. Gracio (Eds) 1º
Volume, pp 145-154, Un. Aveiro, 2000.
590. Rodrigues H, Guedes J, Soto C, Taylor J, “An iterative Model to Design Optimal
Two-Material Composite Structures”, in “Applied Mechanics in the Americas” Eds.
D. Pamplona, C. Steele, W. Weber, P. Gonçalves, I. Jasiuk, L. Bevilacqua, Volume
6, American Academy of Mechanics, USA, Brazilian Society of Mechanical
Sciences, Brazil, pp 251-254 (Proceedings of PACAM VI, Rio Janeiro, Brazil, 4-8
Janeiro, 1999.
591. Rodrigues H, Guedes J, Bendsoe M, “Hierarchical Optimization of Material and
Structure”, presented at 3rd World Congress of Structural and Multidisciplinary
Optimization (WCSMO-3), Buffalo, New York, USA, May 17-21, 1999.
592. Rodrigues H, Miranda P, Guedes J, Jacobs C, “Optimization study of the interface
stiffness in non-cemented hip prostheses”, ICTAM 2000, Chicago, USA, August
2000.
593. Santos J, Soares C M, Soares C A and Pina H, “Damage Identification: A numerical
model, A collection of technical papers”, AIAA/ASME/ASCE/AHS/ASC,
Structures, Structural Dynamics and Materials Conference and Exhibit, AIAA,
Vol.4, 2449-2452, 1999.
594. Sedaghati R, Tabarrok B and Suleman A, “Design Optimization Against Instability
of Frame Structures Undergoing Large Deflections”, First MIT Conference on
Computational Fluid and Solid Mechanics, June 12-15, Cambridge, MA, USA,
2001.
595. Sedaghati R, Tabarrok B, Suleman A, “Integrated Force Method and Optimization
of Adaptive Truss Structures,” International Conference on Computational
Engineering & Sciences, ICES’2K, Aug. 21-25, 2000, Los Angeles, CA, USA.
596. Sedaghati R, Tabarrok B, Suleman A, “Optimum Design of Nonlinear Symmetric
Truss Structures Under System Stability Constraint,” AIAA /NASA/USAF/ISSMO
96
Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA,
USA, Sep. 6-8, 2000.
597. Silva M, Ambrósio J, “Consequências da Filtragem e Consistência Cinemática dos
Pontos Anatómicos na Dinâmica Inversa do Movimento Humano”. In Proceedings
of the VI Encontro de Mecânica Computacional, (Paulo Vila Real and José Grácio,
Eds.), Aveiro, Portugal, April 17-19, 167-180, 2000.
598. Soares C A, Soares C M, & Correia V, “Optimization of Laminated Composite
Plates with Piezoelectric Layers”, Ed. R. Abascal, J. Dominguez & G. Bugead,
Métodos Numéricos en Ingenieria, SEMNI, Espãna, 1-18, 1999.
599. Soares C M, Soares C A and Correia V, “Optimal Design of Piezoelectric
Composite Structures”, 3rd WCSMO, Structural and Multidisciplinary
Optimization, Buffalo, May 17-21, 1999.
600. Soares C M, Soares C A Correia V & Loja M, “Higher Order B-spline Finite Strip
Model for Laminated Composite Structures with Integrated Sensors and Actuators”,
Proc. 3rd International Conference on Composite Science and Technology
(ICCST/3), Ed. By S. Adali, E.V. Morozov & V.E. Verijenko, Dept. of Mechanical
Engineering, University of Natal, Durban, South Africa 313-318, January 2000.
601. Soto C, Taylor J, Du J, Rodrigues H, “Simultaneous design of structural topology
and material properties”, AIAA/NASA/ISSMO Symposium on Multidisciplinary
Optimization. Long Beach, CA, USA, Setembro 2000
602. Soto C, Taylor J, Du J, Rodrigues H, “Treatments for simultaneous structural
topology and material properties design optimization”, ICTAM 2000, Chicago,
USA, August 2000.
603. Suleman A, “Modelling of Shell Adaptive Composites and its Application to Noise
Suppression”, SPIE 6th Annual Symp. on Smart Struct and Materials, 1-5 March
1999, Newport Beach, CA, USA.
604. Suleman A, “On the Use of System Modes to Model Multibody Flexible
Structures”, 50th Inter. Astronautical Congress, IAF-99-A.5.09, Amsterdam, The
Netherlands, 1999.
605. Suleman A, Moniz P and A. Costa, “Experimental Aeroelastic Tailoring Using
Piezoelectric Wing Shape Control”, European Conference on Computational
Mechanics, August 1999, Munich, Germany (Invited Keynote Lecture).
606. Suleman A, Moniz P and A. Costa, “Experimental Flutter and Buffeting
Suppression Using Piezoelectric Actuators and Sensors”, Symposium on Adaptive
Structures and Materials Systems, ASME Inter. Mechanical Eng. Congress and
Exhibition, Nashville, Tennessee, Nov. 14-19, 1999; also SPIE 6th Annual Symp.
on Smart Structures and Materials, 1-5 March 1999, CA, USA.
607. Suleman A, Moniz P and Costa A, “Experimental Flutter and Buffeting Suppression
Using Piezoelectric Actuators and Sensors”, Symposium on Adaptive Structures
and Materials Systems, ASME Inter. Mechanical Eng. Congress and Exhibition,
Nashville, Tennessee, Nov. 14-19, 1999; also SPIE 6th Symp. on Smart Struc. and
Mater., 1-5 March 1999, CA, USA.
97
608. Suleman A, Moniz P and Costa A, “Experimental adaptive control of aeronautical
and aerospace structural vibration”, Integrity, Reliability and Failure Conference,
19-22 July, Porto, eds. S. A. Meguid and J.F.Silva Gomes, 1999
609. Suleman A, Burns S, “Flexural brake mechanism for inchworm actuator”,
Proceedings Canada-US Cansmart Workshop on Smart Materials and Structures,
22-23, Montreal, Quebec, Canada, 125-136, October 2001
610. Veloso A, e Abrantes J, “Estimation of power output from leg extensor muscles on
the acceleration phase of sprint running. Transfer of energy between joints. Y.
Hong, D. Johns(Ed.), Proceedings of the XVIII International Symposium on
Biomechanics in Sports ( 97-101). The Chinese University of Hong Kong, 2000
611. Veloso A, e Abrantes , “Estimation of Power Transfer by Biarticular Leg Extensors
On the Acceleration Phase of the Sprint”. Gerber Hans e Müler Roland (Eds). eProceedings of XVIII Congress of the International Society of Biomechanics.
Laboratory for Biomechanics ETH Zurich Switzerland, 2001.
612. Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., "Experimental Evaluation of the
Transmissibility Matrix" Proceedings of the 17th International Modal Analysis
Conference (IMAC17), Vol. II, pp. 1126-1129, Kissimmee, Florida, U.S.A., 8-11
February 1999.
613. Urgueira, A.P.V., Maia, N.M.M., Almeida, R.A.B., " On The Dynamic Properties
Of Reduced Systems In Structural Coupling " Proceedings of the 17th International
Modal Analysis Conference (IMAC17), Vol. II, pp. 1445-1450, Kissimmee,
Florida, U.S.A., 8-11 February 1999.
614. Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., Sampaio, R.C., "On the Use of
Frequency-Response-Functions for Damage Detection" – Proceedings of the
Second International Conference on Identification in Engineering Systems, pp. 460471, Swansea, United Kingdom, 29-31 March 1999, published by The Cromwell
Press Ltd..
615. Sampaio, R.C., Maia, N.M.M., Ribeiro, A.M.R., Silva, J.M.M., "Damage Detection
Using the Transmissibility Concept" - Proceedings of the Six International
Congress on Sound and Vibration, Vol. 6, pp. 2559-2568, Copenhagen, Denmark,
5-8 July 1999.
616. Silva, J.M.M., Maia, N.M.M., "On the Experimental Dynamic Analysis of Railway
Cars for Updating of Finite Element Models: A Case Study" - Book of Abstracts of
the International Conference on Integrity, Reliability and Failure 99, Porto,
Portugal, 19-22 July 1999.
617. Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., "The Transmissibility Concept in
Multi-Degree-of-Freedom Systems" - European Mechanics Colloquium
(EUROMEC 401) - Inverse Methods in Structural Dynamics, Liverpool, United
Kingdom, 6-8 September 1999.
618. Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., Silva, P.L.C.C., "Application of
Uncoupling Techniques for Experimental Characterization of Joints" - Proceedings
98
of the International Conference on Recent Advances in Modal Analysis Practice,
Gold Coast, Queensland, Australia, 15-17 December 1999.
619. Silva, J.M.M., Maia, N.M.M., Ribeiro, A.M.R., "Estimation of Frequency Response
Functions Involving RDOFs Using an Uncoupling Technique" - Proceedings of the
International Conference on Recent Advances in Modal Analysis Practice, Gold
Coast, Queensland, Australia, 15-17 December 1999.
620. Martins, I., Esteves, J., Silva, F., Alessandro, T., "Electromagnetic Road-Vehicle
Suspensions", Electroimacs, Lisboa, Setembro de 1999.
621. Martins, I., Esteves, J., Silva, Verdelho, P. "Electromagnetic Hybrid Active-Passive
Vehicle Suspension System", IEEE Vehicle Technology Society Annual
Conference, Texas, May 1999.
622. Sampaio, R.C., Maia, N.M.M., Silva, J.M.M., "More Insight Into Some FrequencyResponse-Function Methods For Damage Detection" - Proceedings of the 18th
International Modal Analysis Conference (IMAC18), Vol. 1, pp. 681-689, San
Antonio, Texas, USA, 7-10 February 2000.
623. Maia, N.M.M., Silva, J.M.M., Silva, P.L.C.C., "Identification of the Dynamic
Behavior of Joints Using Substructuring Methods" - Proceedings of the 18th
International Modal Analysis Conference (IMAC18), Vol. 1, pp. 923-929, San
624. Ribeiro, A.M.R., Maia, N.M.M., Silva, J.M.M., "Response Prediction from a
Reduced Set of Known Responses Using the Transmissibility" - Proceedings of the
18th International Modal Analysis Conference (IMAC18), Vol. 1, pp. 425-427, San
625. Sampaio, R.C., Maia, N.M.M., Silva, J.M.M., Ribeiro, A.M.R., "On the Use of
Transmissibility for Damage Detection and Location" - Proceedings of the
European COST F3 International Conference on System Identification & Health
Monitoring, Vol. 1, pp. 363-376, Madrid, Spain, 7-9 June 2000.
626. Silva, J.M.M., Maia, N.M.M., Ribeiro, A.M.R., "An Indirect Method for the
Estimation of FRFs Involving Rotational DOFs" - Proceedings of the International
Conference on Noise and Vibration Engineering (ISMA25), Vol. II, pp. 1013-1020,
Leuven, Belgium, 13-15 September 2000.
627. Urgueira, A.P.V., Maia, N.M.M., Almeida, R.A.B., "Reduction Methods in
Structural Coupling" - Proceedings of the International Conference on Noise and
Vibration Engineering (ISMA25), Vol. II, pp. 1193-1200, Leuven, Belgium, 13-15
September 2000.
628. Silva, Fernando; Almas, E., "Influência dos Coeficientes de Atrito na Eficiência da
Travagem", 7ªs Jornadas de Tribologia, FEUP, Porto, 29 e 30 de Junho de 2000
629. Maia, N.M.M., Sampaio, R.C., Ribeiro, A.M.R., Silva, J.M.M., "Transmissibility
Techniques for Damage Detection" - Proceedings of the 19th International Modal
Analysis Conference (IMAC19), Vol. II, pp. 1524-1527, Kissimmee, Florida, USA,
5-8 February 2001.
99
630. Maia, N.M.M., Ribeiro, A.M.R., Silva, J.M.M., "Indirect Estimation of Rotational
Frequency-Response-Functions" - Proceedings of the 19th International Modal
Analysis Conference (IMAC19), Vol. II, pp. 1535-1542, Kissimmee, Florida, USA,
5-8 February 2001.
631. Silva, J.M.M., Nunes, N.N., Rodrigues, A.D., Cabral, T.B., "Aircraft Propeller
Balancing Using a Portable Computer with a Data Acquisition Card" - Proceedings
(CD-ROM) and Book of Abstracts of the 8th International Conference of
Enhancement and Promotion of Computing Methods for Engineering and Science
(EPMESC VIII), pp. 469, Shangai, China, 25-28 July 2001.
632. Silva, J.M.M., Nunes, N.N., Pestana, P.A., "Automatic Diagnostic of Aircraft Turbo
Engines - DIAMA" - Proceedings (CD-ROM) and Book of Abstracts of the 8th
International Conference of Enhancement and Promotion of Computing Methods
for Engineering and Science (EPMESC VIII), pp. 468, Shangai, China, 25-28 July
2001.
633. Sampaio, R.C., Maia, N.M.M., Silva, J.M.M., "Damage Detection in Structures: A
Comparison of Simple FRF-Based Methods" - Proceedings of the International
Conference on Structure System Identification, Vol. II, pp. 605-613, Kassel,
Germany, 5-7 September 2001.
634. Coelho, Cardeira C., “Using the Hartstone Uniprocessor Benchmark for the
Performance Evaluation of Real-Time Communication Architectures”, in
Proceedings of the WIP session of the 11th Euromicro Conference on Real-Time
Systems, York, England, June 9-11, 1999.
635. Marcolino, V. Ramos, M. Ramalho, J. Caldas Pinto,”Line and Word Matching in
Old Documents” V Ibero-American Symposium On Pattern Recognition, Siarp, pp
123-135, Lisbon, September 11-13, 2000.
636. Marcolino, P. Vieira, M. Ramalho, J. Pinto, F. Muge, “Line and Word Extraction
from XVI Century Books”, 11th Portuguese Conference on Pattern Recognition
RecPad2000, pp. 79-82, Porto 2000.
637. Câmara, Lopes, J., Marques, C., Lima, P., Cardeira, C., "IQ99 – A Mobile
Autonomous Vehicle", CONTROLO’2000, the 4th Portuguese Conference on
Automatic Control, Guimarães – Portugal, October 4-6, 2000, SSMRCP5.
638. Silva, J. M. Conchinha, “Acoustic toolbox for Matlab”, Proc. ECC’01 – Student
Forum, Porto, Portugal, pp. 59-62, Sept. 2001.
639. Silva, J. M. Sousa and J. Sá da Costa. Model-based active noise control using fuzzy
models. In Proceedings of Controlo’2000 - 4th Portuguese Conference on
Automatic Control, pp. 377-382, Guimarães, Portugal, October 2000.
640. Silva, J. M. Sousa, and J. Sá da Costa, “Active noise control based on fuzzy
models”. In Proceedings of 4th European Conference on Noise Control,
EURONOISE’2001. CD_ROM paper 99, pp. 1-14, Patras, Greece, January 2001.
641. Silva, J. M. Sousa, and J. Sá da Costa, “Inverse fuzzy modeling applied to active
noise control”. In Proceedings of European Control Conference, ECC'2001, Oporto,
100
642. Silva, J.M. Sousa, M. Ayala Botto, J.M.G. Sá da Costa, “Acoustic noise
identification using fuzzy modelling techniques”, In 7th International Congress on
Sound and Vibration, pp. 3213-3220, Garmisch-Partenkirchen, Germany, July
2000.
643. Cardeira, "A Real-Time Network for Control Systems", Proceedings of
SICICA’2000, the 4th IFAC Symposium on Intelligent Components and Instruments
for Control Applications, Buenos Aires – Argentina, September 13-15, 2000, pp.
291-296.
644. Valério, “Non-integer order robust control: an application”, Proc. ECC’01 – Student
Forum, Porto, Portugal, pp. 25-28, Sept. 2001.
645. de Paiva, J.R. Carvalho, P. Ferreira, J. Azinheira, "An H2/Hinfinity Heading
Controller for AURORA-I Semi-autonomous Robotic Airship", 14th LTA
Convention, Akron, Ohio, Jul 2001.
646. Campos, “ A real-time control architecture for PUMA robot”, Proc. ECC’01 –
Student Forum, Porto, Portugal, pp. 71-74, Sept. 2001.
647. Muge, I. Granado, M. Mengucci, P. Pina, V. Ramos, N. Sirakov, J. Caldas Pinto, A.
Marcolino, M. Ramalho, P. Vieira and A. Maia do Amaral, “Automatic Feature
Extraction And Recognition For Digital Access Of Books Of The Renaissance”,
ECDL 2000, Fourth European Conference on research and Advanced Technology
for Digital Libraries, Lisbon, September 18-20, 2000, pp 1-13.
648. J Reis, S Carrão, M. Ramalho, J. Caldas Pinto, “An automatic Visual inspection for
Industrial Components”, 11th Portuguese Conference on Pattern Recognition
RecPad2000, pp. 447-450, Porto 2000.
649. Azinheira, E. de Paiva, J. Ramos, S. Bueno, "Guidance Control Strategies for an
autonomous Unmanned Airship", IFAC Int. Conf. SYROCO'2000, Vienna, Austria,
Set 2000.
650. J. Azinheira, E. de Paiva, J. Ramos, S. Bueno, "Guidance of an autonomous
Unmanned Airship with the Use of Differential Propulsion", pp 931-936, 13th
Brazilian Automatic Control Conf., Florianopolis, Brazil, Set 2000.
651. J. Azinheira, E. de Paiva, J. Ramos, S. Bueno, "Guidance of an Autonomous
Unmanned Airship", 15th Bristol Int. UAV Systems Conf., UK, pp20.1-20.8, Apr
2000.
652. J. Azinheira, E. de Paiva, J. Ramos, S. Bueno, "Hovering Control of an
Autonomous Unmanned Airship", CONTROLO’2000, the 4th Portuguese
Conference on Automatic Control, Guimarães, Portugal, Oct 2000.
653. J. Azinheira, E. de Paiva, J. Ramos, S. Bueno, "Mission Path Following for an
autonomous Unmanned Airship", IEEE Int. Conf. on Robotics and Automation, San
Francisco, USA, Apr 2000.
654. J. Azinheira, E. de Paiva, J. Ramos, S. Bueno, M. Bergerman, "Extended Dynamic
Model for AURORA Robotic Airship", 14th LTA Convention, Akron, Ohio, Jul
2001.
101
655. J. Borges, “Input-output feedback linearization based on linear state observer”, in
Proc. ECC’01 – Student Forum, Porto, Portugal, pp. 21-24, Sept. 2001.
656. J. Caldas Pinto, A. Marcolino, M. Ramalho, “Clustering Algorithm for Colour
Segmentation, V Ibero-American Symposium On Pattern Recognition, Siarp, pp
611-617, Lisbon , September 11-13, 2000.
657. J. Caldas Pinto, A. Marcolino, M. Ramalho, F. Muge, N. Sirakov, P. Pina,
“Comparing matching strategies for Renaissance printed words”, in Actas de 10º
Encontro Português de Computação Gráfica, 123-130, Lisboa, 1-3 Outubro 2001.
658. J. Caldas Pinto, P. Vieira, M. Ramalho, M. Mengucci , P. Pina and F. Muge,
“Ancient Music Recovery for Digital Libraries“, ECDL 2000, Fourth European
Conference on Research and Advanced Technology for Digital Libraries, pp 24-34,
Lisbon. September 18-20, 2000.
659. J. Caldas Pinto, Ricardo Pinto, Sara Cabral, Ramalho, M., "Automatic Melanoma
Recognition: a Study. Workshop on Medical Imaging, Aveiro, October 15, 1999 pp
29-32
660. J. M. Conchinha, M. Botto, J. M. Sousa and J. Sá da Costa, “The use of neural
network models in an active noise control applications”. In Proceedings of 4th
European Conference on Noise Control, EURONOISE’2001, CD_ROM paper 22,
pages 1-13, Patras, Greece, January 2001.
661. J. M. Sousa, L. F. Baptista, L.J. Nunes and J. Sá da Costa, “A Neural Network
Implementation of Real-Time Fuzzy Predictive Control”. In Proceedings of
European Control Conference, ECC'2001, Porto, Portugal, September 2001.
662. J. M. Sousa, L. F. Mendonça and J. Sá da Costa, “Fuzzy Filters applied to
Predictive Control of MIMO Processes”. In Proceedings of European Control
Conference, ECC'2001, Oporto, Portugal, September 2001.
663. J. Martins, M. Ayala Botto, J. Sá da Costa, “Modeling of flexible manipulators
towards robust control”, In Controlo 2000 - 4th Portuguese Conference on
Automatic Control, pp. 197-202, Guimarães, Portugal, October 2000.
664. J. Martins, M. Ayala Botto, J. Sá da Costa, “Modeling of flexible manipulators for
control design”, In SYROCO 2000, 6th IFAC Symposium on Robot Control, pp.
271-276, Viena, Austria, September 2000.
665. J. Martins, M. Ayala Botto, J. Sá da Costa, “Modeling of flexible beams for robotic
manipulators”, In NATO-ARW on Computational Aspects of Nonlinear Structural
Systems with Large Rigid Body Motion, pp. 151-164, Pultusk, Poland, July 2000.
666. J. Martins, Miguel Ayala Botto, José Sá da Costa, “Analysis of the centrifugal
stiffening effects for the inverse dynamics control of flexible manipulators”, In 19th
IASTED International Conference on Modelling, Identification and Control, pp.
212-217, Innsbruck, Austria, February 2000.
667. J. Ramos, E. de Paiva, J.R. Azinheira, S. Bueno, S. Maeta, L. Mirisola, M.
Bergerman, B. Faria, "Autonomous Flight Experiment With A Robotic Unmanned
102
Airship", IEEE Int. Conf. on Robotics and Automation, Korea, pp. 4152-4157, Apr
2001.
668. J. Reis, M. Ramalho, J. Caldas Pinto, J. Sá da Costa, “Dynamical Characterisation
of flexible Robots Links using Machine Vision”, V Ibero-American Symposium On
Pattern Recognition, Siarp, pp. 487-492, Lisbon, September 11-13, 2000.
669. J. Reis, M. Ramalho, J. Sá da Costa, “Quality control using an inexpensive machine
vision system”, 11th Portuguese Conference on Pattern Recognition RecPad2000,
pp. 451-454, Porto 2000.
670. J. Sá da Costa, Miguel Ayala Botto, “Active noise control inside train coaches”, In
International Conference on Enhancement and Promotion of Computational
Methods in Engineering and Science, pp. 777-786, Macau, August 1999.
671. J.C S. Marques and J.M.G. Sá da Costa, “Force and Position Control of Robotics
Manipulators: a fuzzy sliding mode approach”, 14th IFAC Triennial World
Congress, 5 a 9 de Julho de 1999, Beijing, China.
672. J.M. Conchinha, C.A. Silva, J. Sousa, M. Ayala Botto, J.M.G. Sá da Costa,
“Acoustic noise modeling and identification using neural and fuzzy techniques”, In
ISMA 25 - International Conference on Noise and Vibration Engineering, pp. 825832, Leuven, Bélgica, July 2000.
673. J.M. Conchinha, J.M. Sousa, M. Ayala Botto, J.M.G. Sá da Costa, “Model-based
active noise control using neural networks”, In European Control Conference 2001,
pp. 72-77, Porto, Portugal, September 2001.
674. J.M. Conchinha, M. Ayala Botto, J.M. Sousa, J.M.G. Sá da Costa, “Acoustic noise
modeling and identification using neural network algorithms”, In 7th International
Congress on Sound and Vibration, pp. 249-256, Garmisch-Partenkirchen, Germany,
July 2000.
675. J.M. Sousa and M. Setnes. Model Predictive Control of Small Plants: A DataDriven Approach Using Simple Fuzzy Tools. In Proceedings of 2000 IEEE
International Conference on Fuzzy Systems. 2, pp. 1017-1020, San Antonio, USA,
May 2000.
676. J.M. Sousa, L.F. Baptista and J. Sá da Costa. Fuzzy predictive algorithms applied to
force control of robotic manipulators. In Proceedings of 6th IFAC Workshop on
Algorithms and Architectures for Real-Time Control, pp. 77-82, Palma de Maiorca,
Spain, May 2000.
677. J.M. Sousa, L.F. Baptista and J. Sá da Costa. Fuzzy predictive filters applied to
force control. In Proceedings of Controlo’2000 - 4th Portuguese Conference on
Automatic Control. Guimarães, pp. 371-376, Portugal, October 2000.
678. J.M. Sousa, M. Setnes, L.F. Baptista and J.M.G. Sá da Costa. Model predictive
algorithms based on fuzzy discrete alternatives. In Proceedings of the 1999 IEEE
International Conference on Fuzzy Systems, p. 228-233, Seoul, Korea, August 1999
103
679. J.M.F. Calado and J.M.G. Sá da Costa, “A Fault Detection and Diagnosis
Methodology for Chemical Processes”, 14th IFAC Triennial World Congress,
Beijing, P.R. China, pp 539-544.
680. J.M.F. Calado, J.M.G. Sá da Costa, “On-Line Fault Detection and Diagnosis Based
on a Coupled System”, European Control Conference-ECC’99, 31 August-3
September 1999, Karlsruhe, Germany.
681. J.M.G. Sá da Costa, “A Design Tool for Automatic Compensation of Dynamic
Linear Systems”, 14th IFAC Triennial World Congress, 5 a 9 de Julho de 1999,
Beijing, China.
682. J.M.G. Sá da Costa, “A Model of the Driver Steering Behavior”, 14th IFAC
Triennial World Congress, 5 a 9 de Julho de 1999, Beijing, China.
683. J.R. Azinheira & H. Oliveira, "Low Cost Inertial System Calibration Through
Genetic Algorithm Identification", 15th Int. Conf. CARS&FOF99, Aguas de
Lindoia, Brazil, Aug 99.
684. J.R. Caldas Pinto, Mendonça, M., Diniz, D., Gonçalves, P., Ramalho, M., " An OnLine Measuring System to Support Heart Surgery", IEE 7th International
Conference on Image processing and its Applications, IPA 99., Manchester, UK,
pp 377-381, 1999.
685. J.R. Carvalho, E. de Paiva, J. Azinheira, J. Ramos, S. Bueno, M. Bergerman, S.
Maeta, L. Mirisola, B. Faria, A. Elfes, "Classic and Robust PID Heading Control of
an Unmanned Robotic Airship", SIRS'2001 Int. Conf., Toulouse, France, Jul 2001,
pp 61-70.
686. L. Almeida, Azevedo, J., Cardeira, C., Costa, P., Fonseca, P., Lima P., Ribeiro, F.,
Santos, V., "Mobile Robot Competitions: Fostering Advances in Research,
Development and Education in Robotics", CONTROLO’2000, the 4th Portuguese
Conference on Automatic Control, pp. 592-597, Guimarães – Portugal, October 4-6,
2000.
687. L. F. Baptista, José Sá da Costa, “A force control approach of robotic manipulators
in non-rigid environments”, Proceedings of The European Control Conference,
ECC99, 31 de Agosto a 3 de Setembro de 1999, Karlshrue, Alemanha.
688. L. F. Baptista, José Sá da Costa, “A force control approach of robotic manipulators
with neural compensation”, Proceedings of The 14nd IFAC World Congress
Beijing’99, 5 a 9 de Julho de 1999, Beijing, China.
689. L. F. Mendonça, C. A. Silva and J. M. Sousa. Branch-and-bound optimization in
model predictive control applied to MIMO systems. In Proceedings of
Controlo’2000 - 4th Portuguese Conference on Automatic Control, pp. 43-48,
Guimarães, Portugal, October 2000.
690. L. Mendonça, “Optimization issues in nonlinear model predictive control of MIMO
systems, Proc. ECC’01 – Student Forum, Porto, Portugal, pp. 5-8, Sept. 2001.
691. L.F. Baptista, J.M. Sousa and J.M.G. Sá da Costa. A non-linear predictive approach
to force control of robotic manipulators. In Proceedings of 18th IASTED
104
International Conference on Modelling, Identification and Control, p. 405-407,
Innsbruck, Austria, February 1999.
692. M. Ayala Botto, B. Wams, T.J.J. van den Boom, J.M.G. Sá da Costa, “Stability
analysis of nonlinear plants under approximate feedback linearization”, In UKACC
International Conference - Control 2000, Session 9B, 6 pages, Cambridge, UK,
September 2000.
693. M. Ayala Botto, J. Sá da Costa, “A neural network model based active noise
controller”, In 19th IASTED International Conference on Modelling, Identification
and Control, pp. 218-223, Innsbruck, Austria, February 2000.
694. M. Ayala Botto, João Miguel Sousa, José Sá da Costa, “Intelligent active noise
control applied in enclosures”, In Inter-Active 2001, on-line conference, 1-13
November 2001.
695. M. Ayala Botto, Ton J. J. van den Boom, José Sá da Costa, “Robust control using
neural networks and input-output feedback linearization”, In European Control
Conference 2001, pp. 3887-3892, Porto, Portugal, September 2001.
696. M. Ayalla Botto, J.R. Azinheira & J. Sá da Costa, "A comparison between robust
and predictive autonomous guidance controllers", In 18th IASTED International
Conference on Modelling, Identification and Control, pp. 496-498, Innsbruck,
Austria, February 1999.
697. M. Mendes, J.F. Calado, J. M. Sousa, and J. Sá da Costa, “Industrial actuator
diagnosis using hierarchical fuzzy neural networks”. In Proceedings of European
Control Conference, ECC'2001, Porto, Portugal, 2723-2728, September 2001.
698. M. Mengucci, I Granado, F Muge, J Caldas Pinto, “A methodology based on
mathematical morphology for the extraction of text and figures from ancient
books”, 11th Portuguese Conference on Pattern Recognition RecPad2000, pp. 471476, Porto 2000.
699. M. Setnes and J.M. Sousa. Fuzzy Model-Based Control: A Practical Approach. In
Proc.3rd IMACS International Multiconference on Circuits, Systems,
Communications and Computers, p. 261-266, Athens, Greece, July 1999.
700. M. Setnes and J.M. Sousa. Fuzzy Rule-Based Optimization in Nonlinear Predictive
Control. In Proceedings of the 5th European Control Conference, Karlsruhe,
Germany, Aug.-Sept, 1999.
701. O. Opaleye, Silva, M., “Open Architecture Implementation in Lumber Cuttting
Machinery”, Proc. of the Student Forum of the European Control Conference
ECC’01, Porto, Portugal, September 4, pp. 83-86, 2001.
702. P. Gonçalves, , J. Caldas Pinto, “Experiments on 2D Visual Servoing of a 2 dof
Planar Robot Manipulator" , Robótica 2001, 1st Portuguese Robotic Festival,
Guimarães, Portugal, April 25-28, 2001.
703. P. Hoekstra, Ton J.J. van den Boom, Miguel Ayala Botto, “Design of an analytic
constrained predictive controller using neural networks”, In Proceedings of
105
European Control Conference, ECC'2001, pp. 3300-3305, Porto, Portugal,
September 2001.
704. P. M. Silva, “ industrial process identification”, Proc. ECC’01 – Student Forum,
Porto, Portugal, pp. 75-78, Sept. 2001.
705. P. Vieira, A. Marcolino, M. Ramalho, J. Pinto, “Ancient Music Optical
Recognition”, 11th Portuguese Conference on Pattern Recognition RecPad2000, pp.
419-420, Porto 2000.
706. P. Vieira, Caldas Pinto, “Recognition of Musical Symbols In Ancient Manuscripts”.
ICIP 2001, International Conference on Image Processing, Salónica, Grécia,
October 7-10, 2001, pp 38-42.
707. P. Vieira, J. Caldas Pinto, “A Classification Method for Ancient Hand-written
Musical Symbols” , in Actas de 10º Encontro Português de Computação Gráfica,
123-130, Lisboa, 1-3 Outubro 2001.
708. P. Vieira, M. Ramalho, J. Caldas Pinto, “Ancient Music Recovery for Digital
Libraries”, V Ibero-American Symposium On Pattern Recognition, Siarp, Lisbon,
September 11-13, 2000. pp 749-758.
709. P., Gonçalves, “Kinematica and Dynamic Visual Servoing”, Proc. of the Student
Forum of the European Control Conference ECC’01, Porto, Portugal, September 4,
pp. 66-70, 2001.
710. R. Babuska, J.M. Sousa and H.B. Verbruggen. Predictive Control of Nonlinear
Systems Based on Fuzzy and Neural Models. In Proceedings of the 5th European
Control Conference, Karlsruhe, Germany, Aug.-Sept, 1999.
711. R. Cabral, O. Machado, J. Caldas Pinto, M. Ramalho, “Antique Book Page
geometrical restoration”, 11th Portuguese Conference on Pattern Recognition
RecPad2000, pp. 75-78, Porto 2000.
712. R. Mendes, P. Vale, J.M. Sousa and H. Roubos, “Avoiding Local Minima in ANN
by Genetic Evolution”. In Proc. of 5th International Conference on Artificial Neural
Networks and Genetic Algorithms, pages 379--382, Prague, Czech Republic, April
2001.
713. Ramos, J.G.; de Paiva, E.C.; Carvalho, J.R.H.; Ferreira, P.A.V.; Azinheira, J.R.;
Bueno, S.S; Maeta, S.M.; Mirisola, L.G.B.; Faria, B.G.; Bergerman, M.; Elfes, A.
“Path Tracking Flight Test of an Autonomous Unmanned Robotic Airship”. 3rd
International Conference on Field and Service Robotics, Otaniemi, Espoo, Finland,
Jun 2001.
714. Antunes C,M. e Martins J.P. “A Computer-Based Assessment and Rehabilitation of
Visual Function in Low vision Children” in Stuen C., Arditi A.., Horowitz A..,
Lang M.A., Rosenthal B., Seidman K., Vision Rehabilitation, Assessment,
Intervention, and Outcomes. Swets & Zeitlinger Publishers. 376-379. 2000.
715. Arpirez J., Gomez-Perez A., Lozano A., Pinto H.S, "How to find Suitable
Ontologies Using an Ontology-Based WWW Broker", Proceedings of the
International Work-Conference on Artificial and Natural Neural Networks,
106
IWANN'99, Engineering Applications of Bio-Inspired Artificial Neural Networks
(Vol. 2), Lecture Notes in Computer Science, number 1607, págs 725-739, Springer
Verlag, 1999.
716. Arpirez J., Gomez-Perez A., Lozano A., Pinto H.S, "Reference Ontology and
(ONTO)2Agent: The Ontology Yellow Pages", Knowledge and Information
Systems 2(4), pags. 387-412, Springer Verlag, 2000.
717. Cravo M.R., Cachopo J.P., Cachopo A.C. e Martins J.P., “Permissive Belief
Revision”, Progress in Artificial Intelligence - Proc. EPIA 2001, Brazdil and Jorge
(eds.), pp. 335-348, Lecture Notes in Artificial Intelligence 2258, Heidelberg,
Alemanha: Springer-Verlag, 2001.
718. Gonçalves D.. “Ubiquitous Computing and AI Towards an Inclusive Society”, in
Proceedings WUAUC01, EC/NSF Workshop Universal on Accessibility of
Ubiquitous Computing, a publicar pela ACM Press em 2001.
719. Matos, P.A. e Martins, J.P., "Non-situacional calculus and database systems",
Proceddings of FOiKS2000, pp. 176-191, Springer-Verlag, 2000.
720. Neves M.C., Antunes, C., Lynce I., Castanheira-Dinis J., Ribeiro da Silva J. e
Martins J.P., “A Computer-Based Assessment and Rehabilitation of Visual
Function in Low Vision Children”, VISION’99, 1999. Também em Vision
Rehabilitation: Assessment, Intervention, and Outcomes, Stuen, Arditi, Horowitz,
Lang, Rosenthal e Seidman (eds.), Lisse, Holanda: Swets & Zeitlinger Publishers,
2000.
721. Neves M.C., Faria M.I., Castanheira-Diniz A., Antunes C., Martins J.P., Orlando J.
e Ribeiro Gonçalves, “A Computer-Based Assessement and Rehabilitation of
Visual Function in Children with Low Vision”, em Vision Rehabilitation
Assessment, Intervention and Outcomes, editado por C. Stuen, A. Arditi, A.
Horowitz, M.A. Lang, B. Rosenthal e K. Seidman, Lisse, The Netherlands: Swets &
Zeitlinger, Setembro 2000.
722. Pinto H.S, "Towards Ontology Reuse", Proceedings of the AAAI99 Workshop on
Ontology Management, AAAI Technical Report, WS-99-13, pags 67-73, AAAI
Press, 1999.
723. Pinto H.S, Gomez-Perez A., Martins J.P., "Some Issues on Ontology Integration",
Proceedings of IJCAI99 Workshop on Ontologies and Problem Solving Methods:
Lessons Learned and Future Trends", pags 7-1-7-12, 1999.
724. Pinto H.S. e Martins J.P., “Ontology Integration: How to perform the Process",
Proc. IJCAI2001 Workshop on Ontologies and Information Sharing, pp. 71-80,
AAAI Press, 2001.
725. Pinto H.S. e Martins J.P., “Reusing Ontologies", Proc. of AAAI2000 Spring
Symposium Series, Workshop Bringing Knowledge to Business Processes, AAAI
Technical Report SS-00-03, Menlo Park, California, USA, AAAI Press, pp. 77-84,
2000.
107
726. Pinto H.S., Martins J.P., "A Methodology for Ontology Integration", Proceedings of
First International Conference on Knowledge Capture, K-CAP 2001, pags 131-138,
ACM Press, 2001.
727. Pinto H.S., Martins J.P., "Revising and extending the Units of Measure
"subontology" ", Proceedings of IJCAI2001 Workshop on IEEE Standard Upper
Ontology, pags 43-50, AAAI Press, 2001.
728. Martins J.P., “Lógicas não monótonas”, em Enciclopédia de termos LógicoFilosóficos, J. Branquinho e D. Murcho (eds.), pp. 447-454, Gradiva, Lisboa, 2001.
729. Antunes C. e Martins J.P., “Knowledge Acquisition System to Support Low Vision
Consultations", Proc. 8th European Conference on Artificial Intelligence in
Medicine (AIME01), Veldhoven, Holanda, 2001.
730. Antunes C., Lynce I., Pereira J.M. e Martins J.P., “Realidade Virtual em SubVisão”, Actas do 9º Encontro Português de Computação Gráfica, Marinha Grande,
Fevereiro 2000.
731. Antunes C., Neves M.C., Martins J.P. e Castanheira-Dinis A., “A Distributed
System to Support Low Vision Consultations", Proc. 4th European Conference on
Low Vision (EuroSight2000), Cascais, Portugal, 2000.
732. Antunes C.M., Lynce I., Pereira J.M., Martins J.P. “Realidade Virtual em
Subvisão”. Actas do 9º Encontro Nacional de Computação Gráfica. 35-41. 2000.
733. Antunes C.M., Oliveira A.L. “Temporal Data Mining: an overview”. Proceedings
of the Workshop on Artificial Intelligence Techniques for Financial Time Series
Analysis, na 10ª Portuguese Conference on Artificial Intelligence. 7-19. 2001
734. Antunes C.M., Oliveira A.L. “Temporal Data Mining: an overview”. Proceedings
of the Workshop on Temporal Data Mining, na conferência Knowledge Discovery
and Data Mining (KDD 01). 2001.
735. Antunes C.M.,Neves M.C., Martins J.P., Castanheira-Dinis A. “An Integrated
System to Support Low Vision Consultations”. Proceedings of the 5th Portuguese
Conference on Biomedical Engineering (BioEng’2000). 17. 2000.
736. Cravo M.R., Cachopo J.P., Cachopo A.C. e Martins J.P., “Permissive Belief
Revision (preliminary report)”, Proc. Workshop on Non-Monotonic Reasoning,
Action and Change, M. Thielscher (ed.), pp. 17-23, International Joint Conference
on Artificial Intelligence, 1999.
737. Leitão, A. M., “FoOBaR, A Prehistoric Survivor”, Proceedings of the European
Lisp User Group Meeting,´1999.
738. Leitão, A. M., “Increasing Readability and Efficiency in Common Lisp”,
Proceedings of the European Lisp User Group Meeting, 1999.
739. Leitão, A. M., “SNePS and Semi-Structured Databases”, Anais do XIV Simpósio
Brasileiro de Banco de Dados, páginas 41-53, 1999.
740. Lopes J., Jorge J., Gonçalves D., Mário Gomes. “Avaliação Comparativa da
Usabilidade de Locais na World-Wide-Web, apresentado no EEI99 - Encontro de
108
Engenharia Informática, organizado pela Ordem dos Engenheiros na Universidade
do Minho - Braga, de 16 a 18 de Dezembro de 1999.
741. Gomes P., Sérgio Tostão, Gonçalves D., Joaquim Jorge. “Web Clipping:
Compression Heuristics for Reading Text on a PDA, in Proceedings Mobile HCI
2001, Third International Workshop on Human Computer Interaction with Mobile
Devices, a publicar num número especial do journal Personal and Ubiquitous
Computing, em 2002.
742. Gonçalves D., Brisson-Lopes J., Jorge J.A., Mário Rui Gomes. “Avaliação
Comparativa da Usabilidade de Locais na World-Wide-Web, in Proceedings 9º
Encontro Português de Computação Gráfica, publicados em formato electrónico na
Revista Virtual (ISSN: 0873-1837),
743. Matos P.A. e Martins J.P., “Non-situation calculus: Relating STRIPS and situation
calculus”, {Proc. Workshop on Non-Monotonic Reasoning, Action and Change, M.
Thielscher (ed.), pp. 103-110, International Joint Conference on Artificial
Intelligence, 1999.
744. Alves M. L., Rodrigues J. M. C., Grácio J. J. e Martins P. A. F., “Precision Forging
of Gears: Experimental and Theoretical Investigation”, Anais do XX SENAFOR,
Porto Alegre, Brasil, 2000.
745. Alves M. L., Rodrigues J. M. C., Martins P. A. F. e Grácio J. J., “Strain Hardening
Ability for Al-Mg-Si Alloy Deformed in Uniaxial Compression”, Anais do XX
SENAFOR, Porto Alegre, Brasil, 2000.
746. Alves M. L., Rodrigues J. M. C. e Martins P. A. F. “Simulação Numérica e
Experimental de Processos de Deformação Plástica na Massa”, 1as Jornadas
Politécnicas de Engenharia Mecânica, Automóvel, Gestão Industrial e Ambiente,
ESTG de Leiria, Leiria, 2001.
747. Alves M. L., Alves N. F. R., Rodrigues J. M. C. e Martins P. A. F. “Simulação
Numérica e Experimental do Forjamento a Quente de uma Flange de Transmissão”,
1as Jornadas Politécnicas de Engenharia Mecânica, Automóvel, Gestão Industrial e
Ambiente, ESTG de Leiria, Leiria, 2001.
748. Alves L. M. M., Rodrigues J. M. C. e Martins P. A. F. “Simulação Numérica de
Componentes para a Indústria Automóvel Obtidos por Forjamento de Sinterizados”,
Ambiente, ESTG de Leiria, Leiria, 2001.
749. Alves N. F. R., Rodrigues J. M. C. e Martins P. A. F., “Forjamento a Quente de
uma Flange de Transmissão”, Anais do VI Congresso Nacional de Mecânica
Aplicada e Computacional, Universidade de Aveiro, Aveiro, 2000.
750. Baptista, R.M.S.O., Antunes Simões J.F.C.P., Matos Rocha E., "Tapping on
Hardened Steels – A Case Study", Third International Conference on Metal Cutting
and High Speed Machining, Metz, França, Junho, 2001.
751. Baptista, R.M.S.O e Vilhena J. N. R. “Enformação Plástica de Chapa Usando Força
de Encostador Variável”, 1as Jornadas Politécnicas de Engenharia Mecânica,
Automóvel, Gestão Industrial e Ambiente, ESTG de Leiria, Leiria, 2001.
109
752. Baptista, R.M.S.O “Tecnologias Avançadas de Enformação Plástica de Chapa
Metálica”, 1as Jornadas Politécnicas de Engenharia Mecânica, Automóvel, Gestão
Industrial e Ambiente, ESTG de Leiria, Leiria, 2001.
753. Baptista, R.M.S.O, Beatriz. M.C.J.S e Rosa P. A. R. C “Prototipagem Virtual de
Componentes em Chapa Metálica para a Indústria Automóvel”, 1as Jornadas
ESTG de Leiria, Leiria, 2001.
754. Baptista, R.M.S.O, Rosa P. A. R. C e Beatriz. M.C.J.S “O Processo de Tube
Hydroforming”, 1as Jornadas Politécnicas de Engenharia Mecânica, Automóvel,
Gestão Industrial e Ambiente, ESTG de Leiria, Leiria, 2001.
755. P. Costa, L. Quintino, M. Greitmann, “Laser Beam Welding Hard Metals to Steel",
“Proceedings of the International Conference the Human Factor and Its
Environment”, “52ª Assembleia Annual do IIW”, Lisboa, Julho/99
756. P.F. Cunha, José Dionísio, Elsa Henriques, “Virtual Environments for
Manufacturing Planning and Control”, “Proceedings of IASTED International
Conference on Applied Simulation and Modelling, ASM 2001, Spain, Septembre
2001
757. P.F. Cunha, Pedro Laureano, Elsa Henriques, “The Relevance of Performance
Measures within a Discrete Event Simulation Project”, “Proceedings of IASTED
International Conference on Applied Simulation and Modelling, ASM 2001, Spain,
Septembre 2001
758. P.F. Cunha, R.M. Mesquita, “A Methodology for Evaluation of Process and
Production Planning”, “Proceedings of the 15th International Conference on
Computer Aided Production Engineering”, Durham, UK, April 1999.
759. José Caldeira Duarte, João Taborda Craveiro, Luís Maltez – “Integrating
Maintenance into Production: Productive Services Priorities”, 3rd International
ICSC World Manufacturing Congress 2001, Rochester, New York, September 2001
760. José Caldeira Duarte, João Taborda Craveiro, Luís Maltez – “Integrating
Maintenance into Production”, IERC 2001, 10th Annual Industrial Engineering
Research Conference, Dallas, Texas, May 2001
761. Diamantino Durão, Luís Maltez, Vasco Varela – “Government Use of Privately
Managed Science Park”, 3rd International Conference on Tecnological Policy and
Innovation, Austin, Texas, September 1999
762. Diamantino Durão, Luís Maltez, Vasco Varela – “Profitable Science Parks and
Regional Development”, 4th International Conference on Tecnological Policy and
Innovation, Curitiba, Brazil, August 2000
763. Ferreira, J.C., Alves, N.F., Mateus, A.J.S., "3D Digitising for Reverse Engineering
to Manufacture Rapid Tooling", conference international EURO RP-2001 (9èmes
Assises Européennes du Prototypage rapide and 10th European Conference on
Rapid Prototyping and Manufacturing), p.p.7, Paris / France, June 2001.
110
764. Ferreira, J.C., Mateus, A.J.S., “Simulation and Analysis of Fracture in Laser
Stereolithography Patterns and in Ceramic Shells for Investment Casting”, in
proceedings of “1st International Materials Symposium – MATERIAIS 2001”,
sponsored by Portuguese Materials Society, p.p. A119, Coimbra, April 2001.
765. Ferreira, J.C., Mateus, A.J.S., "Modelling of Solidification Process to Cast EDM
Electrodes from Rapid Prototyping", conference international - "EUROMAT 99",
part book "Microstructures, Mechanical Properties and Processes" (Euromat 99 /
FEMS - Federation of European Materials Societies), WILEY-VCH Verlag GmbH,
editor Prof. Yves Bréchet, ISBN 3-527-30122-4, 1st edition, vol.3, p.p.331-336,
Munch/Germany, 2000.
766. Ferreira, J.C., Mateus A.S., "Computer Simulation Before Rapid Tooling to
Produce EDM Electrodes", "9th. European Conference on Rapid Prototyping and
Manufacturing", "The University of Nottingham and Authors - 2000", pp.1-10,
Athena / Greece, July 2000.
767. Ferreira, J.C., Mateus, A.J.S., “Computer Simulation to Optimize Rapid Tooling for
Cast EDM Electrodes”, 8th. International Conference on Rapid Prototyping, The
University of Daiton Press - 2000, pp.335-340, Tokyo/Japan, 12-13 June 2000.
768. Ferreira, J.C., Alves, N.M., “Image Processing after 3D-Scanning for Quality
Control of Rapid Prototyping Pieces”, in proceedings of IWK- 44th International
Scientific Colloquium, TUI - Technical University of Ilmenau (Thür), ISSN 09437207, pp. 445-450, vol.1, Germany, September 1999.
769. Ferreira, J.C., Mateus, A.J.S., “Production of EDM Electrodes via Rapid
Prototyping”, in proceedings of IWK- 44th International Scientific Colloquium, TUI
- Technical University of Ilmenau (Thür), ISSN 0943-7207, vol.3, p.p.390-395,
Germany, September 1999.
770. Ferreira, J.C., Mateus, A.J.S., “Solidification Simulation to Test Casting Electrode
Shape before Rapid Prototyping”, in proceedings of IWK- 44th International
Scientific Colloquium, TUI - Technical University of Ilmenau (Thür), ISSN 09437207, vol.3, p.p. 93-98, Germany, September 1999.
771. Ferreira, J.C., “Tele-Teaching Rapid Prototyping Technology”, in proceedings of
"3. Workshop multimedia für bildung und wirtschaft", TUI - Technical University
of Ilmenau (Thür), ISSN 1436-4492, vol.1, p.p.119-120, Germany, 1999.
772. Ferreira, J.C., “Solidification Modelling to Optimise Castings before Rapid
Prototyping”, in proceedings of NAFEMS’99 - “Effective Engineering Analysis”,
cap. “Engineering Integration Challenges”, NAFEMS - International Association
for the Engineering Analysis Community, ISBN 1-874376-25-5, vol.1, p.p.369-377,
U.K., 1999.
773. Ferreira, J.C., “Design Analysis via Simulation by Reverse Engineering to Optimise
Castings”, in proceedings, in proceedings of NAFEMS’99 - “Effective Engineering
Analysis”, cap. “Process Simulation”, NAFEMS - International Association for the
Engineering Analysis Community, ISBN 1-874376-25-5, vol.1, p.p.47-58, U.K.,
1999
111
774. V. Gonçalves, M.Napoleão, S. Vidal “Resistance Spot Welding of Zinc Coated
Steel” –Eurojoin 4- Dubrovnik, Croácia May of 2001
775. Gouveia, B. P. P. A., Rodrigues J. M. C., Martins P. A. F. e Atkins A. G., “Crack
Initiation in Metalworking: Experimental and Theoretical Investigation”,
EUROMECH/ESIS2000, University of Reading, Reino Unido, 2000.
776. Gouveia, B. P. P. A., Rodrigues J. M. C. e Martins P. A. F., “Fracture Research in
Metalworking: Experimental and Theoretical Investigation”, Anais do XX
SENAFOR, Porto Alegre, Brasil, 2000.
777. Gouveia B. P. P. A., Rodrigues J. M. C. e Martins P. A. F., “Simulação Numérica e
Experimental de Processos de Extrusão Directa”, Anais do VI Congresso Nacional
de Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, 2000.
778. Henriques, R. Mesquita, “An Integrated Model for Cutting Parameters Optimisation
and Shop-Floor Scheduling”, “Proceedings of the 6th International Conference on
Advanced Manufacturing Systems and Technology”, Udine, Itália, Junho, 1999.
779. E. Henriques, P. Sousa, P.F. Cunha, “Design and Planning Application for a
Cellular Manufacturing System”, “Proceedings of IASTED International
Conference on Applied Simulation and Modelling, ASM 2001, Spain, Septembre
2001
780. Inácio B. F. C., Rodrigues J. M. C. e Martins P. A. F., “Forjamento a Quente de
uma Tampa para Actuador Pneumático”, Anais do VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, 2000.
781. Luís Maltez – “Competitividade e Recursos Humanos”, 34º Encontro Nacional da
APG, Estoril, Portugal, November 2001
782. Luís Maltez – “Taguspark, Lisbon, Portugal – A Public-private Self-sustainable
Science and Technology Park Launched by Government Initiative”, Poland in the
European Research Area, Krakow, Poland, September 2001
783. Luís Maltez – “Networking – How to Build Your Tenants’ Visibility to the Outside
World”, XVIII World Conference on Science and Technology Parks, IASP –
International Association of Science Parks, Bilbao, Spain, June 2001
784. Luís Maltez, Vasco Varela – “Taguspark´s Development: Key Success Factors and
Lessons Learned”, XVIII World Conference on Science and Technology Parks,
IASP – International Association of Science Parks, Bilbao, Spain, June 2001
785. Luís Maltez, Vasco Varela – “Promoting Innovation Through Private-Public
Partnership”, XVI World Conference on Science and Technology Parks, IASP –
International Association of Science Parks, Istanbul, Turkey, September 1999
786. Luís Maltez – “Taguspark – Análise dum Caso de Sucesso”, Seminar on Pólos
Tecnológicos e Desenvolvimento Regional, Forum Temático sobre Ciências da
Vida, Coimbra, July 1999
787. Luís Maltez – “European National Experiences and the Role of the National
Associations of Science Parks – Tecparques, the Portuguese Association”, 13th
112
European Conference on Science and Technology Parks, IASP – International
Association of Science Parks, Málaga, Spain, June 1999
788. Luís Maltez – “Parques de Ciência e Tecnologia Auto-Sustentáveis”, XIII Congress
of Ordem dos Engenheiros, Porto, September 2000
789. Luís Maltez – “O Modelo dos Parques Tecnológicos de Nova Geração”, Seminary
on Strategic Options of Entrepreneurial Competitiveness, ADRAVE, Guimarães,
February 2000
790. Mateus, A.J.S., "Hybrid Moulds Manufactured with Rapid Tooling Technology for
Plastic Injection Moulding", conference international EURO RP-2001 (9èmes
Assises Européennes du Prototypage rapide and 10th European Conference on
Rapid Prototyping and Manufacturing), p.p.8, Paris / France, June 2001.
791. M.Melo, P.Vassalo, M.Santos, R.Mesquita, “Maquinagem do aço AISI L6 por
electroerosão com fio: caracterização das camadas superficiais em ensaios de
microdureza”, 3ºEnc. Anál. Exper. Tensões, Porto, 3-6, Mars, 1999.
792. M.Melo, P.Vassalo, M.Santos, R.Mesquita, “Defeitos estruturais da superfície
maquinada por EDM de um aço ledeburítico do tipo AISI D2”, 9-10, 3ºEnc. Anál.
Exper. Tensões, Porto, Mars, 1999.
793. M.Melo, P.Vassalo, M.Santos, Ruy Mesquita, “Microhardness profile of wire
electro-discharge machined AISI L6 steel”, Int. Conf. Integrity, Reliability and
Failure, 216-220, Porto, July, 1999.
794. P. Peças, E. Henriques, L.Raposo, “Electrical Discharge Machining with Additive:
a Way of Mould Steels Non-manual Polishing”, “Proceedings of 1st International
Seminar on Progress in Innovative Manufacturing Engineering”, PRIME 2001, Italy
June 2001
795. Pires, L. Quintino, C. Rangel, G.E. Thompson, P. Skelron; “Pre treatment 2024 T3
Aluminium Alloy”, 2nd International Symposium on Aluminium Surface Science
and Technology (ASST 2000), Manchester, England, UK, May 2000.
796. L. Quintino, R. Antunes, Serra Neves, “European Welders Training and
Qualification in Training and Qualification Scheme – Implementation in Training
Centres in Portugal”, “Proceedings of the International Conference the Human
Factor and Its Environment”, “52ª Assembleia Annual do IIW”, Lisboa, Julho/99
797. L. Quintino, “International Education, Examination and Qualification System for
Welding Personnel”, “Standards and their Implementation in welding and allied
processes",Croatia, Set 2000
798. L. Quintino, C. Vieira, Sistema Europeu de Qualificação de Pessoal em Soldadura,
1º Congresso Nacional da Qualidade, 2000
799. L. Quintino, P. Vilaça, P. Magalhães, “SEEK – Sensor Explorer Expert Key”,
“2001 Annual Assembly of IIW”, Ljubljana, Eslovénia, DOC IIW XII-1665-01, pp.
267-273, Julho de 2001.
113
800. L. Quintino, “Developments in Arc Welding”, proceedings da “High Productivity
Joining Processes, Fundamentals, Applications, Equipment - Eurogress Aachen”,
Aachen, Alemanha, vol. I, pp. 285-298, Maio de 2001.
801. J. M. C. Rodrigues e P.A. F. Martins, “Theoretical and Experimental Development
of an Industrial Process for Minting Bimetallic Foiled Coins”, International
Conference on Education, Practice and Promotion of Computational Methods in
Engineering Using Small Computers - EPMESC VII, Macau, 1999.
802. Rodrigues J. M. C. e Martins P. A. F., “Tecnologia de Enformação Plástica na
Massa: da Antiguidade ao Novo Milénio”, Anais do VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, 2000.
803. R. Rodrigues, L. Bordalo, N. Sobral, P. Vilaça, L. Quintino, “Laser Welding in
Automotive Industry. An Application: Joining Hinges to Car Doors Reinforcement
Structure”, “Proceedings of the International Conference the Human Factor and Its
Environment”, “52ª Assembleia Annual do IIW”, Lisboa, Julho/99
804. Santos, J.P.Duarte, L. Quintino, “MICDRILL – Microdrilling of Metallic Materials
for Engineering Applications”, proceedings da “4th European Conference on
Welding Joining and Cutting – EUROJOIN 4”, Dubrovnik, Croácia, pp. 349-355,
Maio de 2001.
805. Silva, H. Gouveia, L. Quintino, “Developments on Tailored Welded Blanks
Technology”, proceedings da “4th European Conference on Welding Joining and
Cutting”EUROJOIN4”, Dubrovnik, Croácia, pp. 355-361, Maio de 2001.
806. José Simões, Fernando Cruz, T. Coole, “Production of Direct Implant Medical
Models in a Biocompatible Ceramic using Rapid Prototyping Techniques”, TCT –
Time Compression Technologies / Congress and Exhibition, Manchester, Inglaterra,
2001.
807. José Simões, Fernando Cruz, C. Bocking, T. Coole , “Rapid Prototyping of Direct
Implant Medical Models from a Biocompatible Ceramic using Rapid Prototyping
Techniques”, CAS 2001 – Computer Assisted Surgery & Rapid Prototyping in
Medicine / Congress and Exhibition, Nürnberg, Alemanha, 2001.
808. José Simões, David Cheshire, T. Coole e António R. Pires, “Tool Wear Analysis
using Factorial Techniques”, ATT – Automotive and Transportation Technology
Congress and Exhibition, Barcelona, Espanha, 2001.
809. José Simões, David Cheshire, T. Coole e António R. Pires, “The Main Conclusions
of a Research Made on Plaster Milling Using a Robotic System”, AMPT’01 –
International Conference on Advances in Materials and Processing Technologies,
Leganés/Madrid, Espanha, 2001.
810. José Simões, David Cheshire, T. Coole e Ruy Mesquita, “Tool Life Prediction
Model by Factorial Design of Experiments for Machining of Plaster Material”,
FAIM’01 – Flexible Automation & Intelligent Manufacturing, Dublin City
University, Irlanda, 2001.
811. J. A. Simões, T. L. Coole, D. G. Cheshire, R. Mesquita, “An overview on the
machining techniques with potential application in the ceramic industry”,
114
“Proceedings of the 15th International Conference on Production Research”,
Limerick, Irlanda, August 1999.
812. J. A. Simões, T. L. Coole, D. G. Cheshire, R. Mesquita, “Analysis of a robot
system capabilities in the machining of full scale prototypes”, “Proceedings of 32nd
International Symposium on Automotive Technology & Automation (ISATA)”,
Vienna, Austria, June 1999.
813. Xiong S., J. M. C. Rodrigues, P.A. F. Martins e Liu Xianghua, “Three Dimensional
Analysis of Flat Rolling by a Combined Finite Element - Boundary Element
Approach”, International Conference on Education, Practice and Promotion of
Computational Methods in Engineering Using Small Computers - EPMESC VII,
Macau, 1999
814. Xiong S., J. M. C. RodrigueS e P. A. F. Martins, “Simulation of Three Dimensional
Flat Rolling by a Combined Finite Element - Boundary Element Approach”, ICME2000, 1st. International Conference of Mechanical Engineering, China, 2000.
815. Xiong S., Rodrigues J. M. C. e Martins P. A. F., “Simulation of the Upsetting of
Slabs by Rigid Plastic Boundary Element Method”, International Conference on
Education, Practice and Promotion of Computational Methods in Engineering
Using Small Computers - EPMESC VIII, Shangai, 2001.
816. A.F. de O. Falcão, “Design and construction of the OWC wave power plant at the
Azores”, Wave Power: Moving towards Commercial Viability. Proceedings of an
International Seminar. The Institution of Mechanical Engineers, London, 1999.
817. M. Webster and L.M.C. Gato, "The Effect of Rotor Blade Shape on the
Performance of the Wells Turbine”, Proceedings of 9th International Offshore and
Polar Engineering Conference, Brest, France, Vol. 1, p. 169-173, 1999.
818. Thakker, P. Frawley, J. Daly, S. Fricke, L.M.C. Gato, S. Raghunathan and J.K.
Watterson, “A 3D Computational Fluid Dynamics Study of Air Flow Through a
Wells Turbine”, Proceedings of the 18th International Conference on Offshore
Mechanics and Arctic Engineering, ASME, The American Society of Mechanical
Engineers, New York, EUA, p. 1-8, 1999
819. de O. Falcão, “The shoreline OWC wave power plant at the Azores”, Proceedings
of the Fourth European Wave Energy Conference, Aalborg, Denmark, paper B1,
2000.
820. P. A. P. Justino & A. F. de O. Falcão, “Active relief-valve control of an OWC wave
energy device”, Proceedings of the Fourth European Wave Energy Conference,
Aalborg, Denmark, paper J2, 2000.
821. J. C. C. Henriques & L. M. C. Gato, “Adaptive control of the high-speed stop-valve
of the Azores plant”, Proceedings of the Fourth European Wave Energy
Conference, Aalborg, Denmark, paper J6, 2000.
822. Brito-Melo, L. M. C. Gato & A. J. N. A. Sarmento, “Analysis of Wells turbine
design parameters by numerical simulation of the OWC performance”, Proceedings
of the Fourth European Wave Energy Conference, Aalborg, Denmark, paper J5,
2000.
115
823. M. T. Pontes & A. F. de O. Falcão, “Ocean energy conversion”, Proceedings of 6th
International Summer School on Solar Energy 2000, Klagenfurt, Austria, August
2000.
824. V. Brederode & B. Rocha, Aerodynamic interference among neighbouring lifting
components, NATO-RTO-AVT Symposium on 'Unmanned Vehicles for Aerial,
Ground and Naval Military Operations', Ankara, October 2000.
control of an OWC wave power plant”, Proceedings of the 20th International
Conference on Offshore Mechanics and Arctic Engineering, ASME, Rio de Janeiro,
Brazil, 2001. Paper OMAE2001/OSU-5001.
826. M.T.Pontes, A.F. de O. Falcão, "Ocean energies: resource and utilization", 18th
World Energy Congress, Buenos Aires, Argentina, Paper No. 01-06-12, October
2001.
827. Costa Pereira, N. H. and Borges, J. E., “Cálculo do Escoamento em Tubeiras para
Turbinas Cross-Flow”, presented at COBEM 2001 – XVI Congresso Brasileiro de
Engenharia Mecânica, Brasil, November 2001.
828. Borges, J. E., “Método Computacional para Projecto de Condutas”, presented at
COBEM 2001 – XVI Congresso Brasileiro de Engenharia Mecânica, Brasil,
November 2001.
829. Domingos,J.D., Urban Planning and the Virtual City , 2001 International
Conference and Exhibition on Sustainable Development and Green Enterprises,
Macau [Nov1 1-3, 2001]
830. J. Dionísio et. al.,Environmental Information and Feedback through Information
Technologies: the example of S. João da Talha,ICPPIT´99, Proc. Conf. On Public
Participation and Information Technologies, 20-22 Outubro, 1999, Lisboa
831. J. C. Teixeira, C. Páris, J. Brisson Lopes, Ana Paiva, “Authoring Courseware for
Distributed Environments”, International Conference on Visual Computing, Goa,
February 23-26, 1999.
832. J. C. Teixeira, C. Páris, J. Madeira, J. Brisson Lopes, Courseware Reuse or
Courseware to Reuse, Graphics and Visualisation in Education'99, SIGGRAPH and
EUROGRAPHICS, Coimbra, July, 1999.
833. J. Brisson Lopes, M. R. Gomes, J. C. Bernardo, J. Jorge, J. M. Pereira,
Restructuring Computer Graphics and Visualisation Curricula at IST, Graphics and
Visualisation in Education'99, SIGGRAPH and EUROGRAPHICS, Coimbra, July,
1999.
834. J. Brisson Lopes, J. C. Teixeira, C. Páris, Ana Paiva, "Autoria de Courseware para
Ambientes Distribuídos", CGME'99, pp 3/15-22, Grupo Português de Computação
Gráfica, Leiria, February, 1999 (best paper award ex-aequo).
835. M. R. Gomes, J. Brisson Lopes, M. J. Fonseca, "A Disciplina de Interfaces
Homem-Máquina no IST", CGME'99, pp 1/20-26, Grupo Português de
Computação Gráfica, Leiria, February, 1999 (best paper award ex-aequo).
116
836. J. Jorge, J. Brisson Lopes, J. C. Bernardo, J. Madeira, M. R. Gomes, "O Ensino da
Computação Gráfica no IST: que Futuro?", CGME'99, pp 1/7-11, Grupo Português
de Computação Gráfica, Leiria, February, 1999 (best paper award ex-aequo).
837. J. Brisson Lopes, J. Jorge, D. Gonçalves, M. R. Gomes, "Avaliação Comparativa da
Usabilidade de Locais na WWW", Encontro de Engenharia Informática '99, pp 7982, Ordem dos Engenheiros, Braga, 1999.
838. J. Dionísio et. al.,"Construção e gestão da complexidade de cenários urbanos 3D em
ambientes virtuais imersivos",(English: Modeling and complexity management of
3D urban scenarios in Virtual Reality"),EUROGRAPHICS Portuguese Chapter,
October 2001, Portugal
839. J. Dionísio et al, "Virtual Environments for Manufacturing Plasnning and Control",
pp. 261-267, Applied Simulation and Modelling, Proc. IASTED International
Conf., ACTA Press, September 4-7, 2001, Marbella, Spain, ISBN 0-88986-311-3
840. Daniel Gonçalves, J. Brisson Lopes, Joaquim A. Jorge, M. R. Gomes, Avaliação
Comparativa da Usabilidade de Locais na World-Wide Web, 9º Encontro Português
de Computação Gráfica, pp109-117, Marinha Grande, Fevereiro 2000.
841. X.-Q. Chen and J.C.F.Pereira (1999). “Modeling of Particle Transport in
Trifurcating Pipes”. 9th Workshop on Two-Phase Flow Predictions, Merseburg,
Germany, April 13-16.
842. X.-Q. Chen and J.C.F.Pereira (1999). “A General Particle Dispersion Model for
Lagrangian Trajectory Simulation of Two-Phase Flow in Curvilinear Coordinates”.
1st International Symposium on Turbulence and Shear Flow Phenomena, Santa
Barbara, USA, September 12-15.
843. X.-Q.Chen and J.C.F.Pereira (1999). “Two-Way Coupling Effects on Two-Phase
Flow Predictions”. 2nd Intenational Symposium on Two-Phase Flow Modeling and
Experimentation, Pisa, Italy, May 23-26, pp.1153-1160.
844. I.Malico and J.C.F.Pereira (1999). "Sensitivity Study on the Influence of Radiative
Properties in Porous Media Combustion". 5th Int. Conf. on Technologies and
Combustion for a Clean Environment, Lisboa, 12-15 Julho.
845. N.P.C. Marques and J.C.F. Pereira (1999). “Navier-Stokes Compressible 3D Fluid
Flow Predictions on Hybrid Unstructured Grids using Implicit Matrix-Free
Methods”. 3rd ASME/JSME Joint Fluids Engineering Conference, July 18-23, San
Francisco, California.
846. Marques and J.C.F.Pereira (1999).”Comparison of Matrix-Free Acceleration
Techniques for Compressible Navier-Stokes Calculations”. International
Conference on Preconditioning Techniques for Large Sparse Marrix Problems in
Industrial Applications. 10-12, Minneapolis, Minnesota, USA
847. X.-Y.Zhou and J.C.F.Pereira (1999). "Large Eddy Simulation and Filtered Density
Function for a Spatially-Developing Reacting Plane Mixing Layer". 4th
International Symposium on Coal Combustion, Beijing, P.R. China, 18-21 August.
117
848. Malico, X.-Y. Zhou and J.C.F. Pereira (1999). “Pollutants Emission Prediction in
Combustion in Inert Porous Media”. RTO Meeting Proceedings 14 - Symposium on
Gas Turbine Engine Combustion, Emissions and Alternative Fuels, Lisbon,
Portugal, 12-16 October.
849. J.C.F. Pereira (1999). “High Order Compact Finite-Difference Solutions of
Incompressible Navier-Stokes Equations”. Métodos Numéricos en Ingeniería,
Sevilha, Espanha.
850. J.C.F.Pereira (1999). “Comparison of Several Compact High-Order Finite
Difference Schemes for Spatial Discretization of the Navier-Stokes Equations”.
Macau.
851. J.M.C.Pereira, M.H.Kobayashi and J.C.F. Pereira (2000). “High Order Compact
Schemes in Finite Volume Context”, ECOMAS - 2000, Barcelona, Espanha, 11-14
September.
852. N.Marques and J.C.F.Pereira (2000). “Implicit turbulent Navier-Stokes Calculations
with a Matrix-Free Algorithm”, ECOMAS - 2000, Barcelona, Espanha, 11-14
September.
853. T. Schönfeld, A. Corjon, R. Rudnik, G. Elphick and J.C.F.Pereira (2000).
“Simulation of wake vortex formation behind a high-lift aircraft configuration”,
ECOMAS - 2000, Barcelona, Espanha, 11-14 September.
854. J.C.F. Pereira (2001). “Advances in Computational Heat Transfer”, ICHMT
Symposium CTH’01, Palm Cove, Australia, 18-30 May
855. J.M.C.Pereira, M.H. Kobayashi and J.C.F. Pereira (2001). “High Order Finite
Volume Compact Schemes”, ICOSAHOM-01 Internacional Conference on Spectral
and High Order Methods, 11-15 June, Uppsala University, Sweden.
856. J.M.C. Pereira, N.P.C. Marques, M.H. Kobayashi and J.C.F. Pereira(2001) "A
Newton-Krylov Matrix-Free Pressure-Velocity Coupling of Compact FiniteVolume Navier-Stokes Equations", ICHMT -International Symposium on Advances
in Computational Heat Transfer, 20-25 May, Queensland, Australia.
857. J. M. C. Pereira, T. C. Hayashi, N. P. C. Marques and J. C. F. Pereira (2001). “A
Coupled Implicit Newton-Krylov Matrix Free Numerical Method for Combustion
in Inert Porous Media”, 2nd International Conference on Computational Heat and
Mass Transfer, 22-26 October, Brazil.
858. Sousa, J.M.M. (2001) Turbulent Flow Around a Surface-Mounted Obstacle Using
2D-3C DPIV, Fourth International Symposium on Particle Image Velocimetry,
Göttingen (Germany), September 17-19, paper 1044 (published in CD-ROM, Ed., J.
Kompenhans).
859. Afgan, Naim H., Sustainability Concept, Lecture at the EURO Course on
Sustainability Assessment of Natural Gas Systems, Nov. 19-24, Lisbon, 2001.
860. Afgan, Naim H., Multi-criteria Sustainability Assessment of Natural Gas Turbines,
Lecture at the EURO Course on Sustainability Assessment of Natural Gas Systems,
Nov. 19-24, Lisbon, 2001.
118
861. Afgan, Naim H., Sustainability Concept, Lecture at the EURO Course on
Sustainability Assessment of New and Renewable Energy Sources, July 2-7,
Madeira, 2001.
862. Afgan, Naim H., Multi-criteria Sustainability Assessment of New and Renewable
Energy Sources, Lecture at the EURO Course on Sustainability Assessment of New
and Renewable Energy Sources, July 2-7,2001, Madeira
863. Afgan, Naim H., Sustainability As A Challenge
Sciences,Stockholm Panel , Nobel Institute, March 14, 2001.
For
Engineering
864. Afgan, Naim H., Sustainability Assessment Method for Energy System, Invited
Lecture, University of Rome, La Sapienza, March 3,2001.
865. Afgan, Naim H., Sustainability Concept for the Development of Energy Systems,
University of Zagreb, Invited Lecture, Dec. 14,2001.
866. Afgan, N. and Carvalho, M.G. - "Low NOx Combustion Chamber for Internal
Combustion Engines". Fifth International Conference on Technologies and
Combustion for a Clean Environment, Lisbon, Portugal, 12-15 July 1999,
Proceedings, Vol. I, pp. 547-550.
867. Afgan, N., Darwish, M. and Carvalho, M.G. - "Sustainability Assessment of
Cogeneration of Water Production and Power Plant". European Conference on
Desalination and the Environment, Las Palmas, Gran Canaria, Espanha, 9-12
November 1999.
868. Afgan, N. and Carvalho, M.G., - "Sustainability indicators for energy systems". The
4th. International Conference on New Energy Systems and Conversions, Osaka,
Japan, 27-30 June 1999.
869. Afgan, N. H. and Carvalho, M. G. – “Multi-criteria Assessment of New and
Renewable Energy Power Plants”. 2nd International Conference on Energy
Research and Development, Kuwait, 5-7 November 2001.
870. Afgan, N. H., Carvalho, M. G. and Hovanov, N. – "Multi-criteria Sustainability
Assessment of Clean Air Technologies" 6th International Conference on
Technologies and Combustion for a Clean Environment, O Porto, Portugal, 9-12
July 2001.
871. Afgan, N. and Carvalho, M.G. - “Sustainable Development in South East Europe”.
International Conference of Experts “Reconstruction of Scientific Cooperation in
South East Europe”, Venice, Italy, 24-27 March 2001. Proceedings pp. 157-161.
872. Afgan, Naim H., Carvalho, Maria G., Hovanov, Nikolai V., Sustainability
Assessment of Renewable Energy Systems, New and Renewable Technologies for
Sustainable Development, Madeira, Portugal, 26-29 June 2000.
873. Afgan, N. H., Carvalho, M.G. and Morse, H. - “Euro Courses in Multimedia
Environment on Sustainability Assessment of Energy Systems”. First Electronic
International Conference on Engineering Education, Copenhagen, enmark, JulyAugust 2001.
119
874. Afgan, N. H., Carvalho, M.G., Martins, N. and Nogueira, M.- “A Concept of
Prognostic and Diagnostic System for Monitoring of Gas Turbine Combustion
Chambers”. RADIATIVE TRANSFER 2001 – The Third International Symposium
on Radiative Transfer, Antalya, Turkey, 17-22 June 2001.
875. Alves, L.M. and Carvalho, M.G. - "An Integrated Model for the Sustainable
Development in South Europe Cities". European Meeting City of Tomorrow,
Strasbourg, France, 9-10 December 1999, Proceedings, Session 1-C-2.
876. Alves, L.M. and Carvalho, M.G. - "European Innovative New and Renewable
Energy Technologies in African Islands and Remote Regions". African Regional
Workshop on Transfer of Technology, Arusha, Tanzania, 16-18 August 1999.
877. Alves, L.M., Costa, A. and Carvalho, M.G. - "Analysis of Potential for Market
Penetration of Renewable Energy Technologies in Peripherallslands". 1° Congresso
Luso-Moçambicano de Engenharia, Maputo, Moçambique, 14-16 Setembro 1999,
Proceedings CLME'99 (Ed. J.F. Silva Gomes, António Matos, Clito Afonso), Vol.
11, E.-65-70.
878. Azevedo, J., Costa, M., Semião, V., e Carvalho, M.G., Experimental investigation
on the combined combustion of textile wastes and propane in a large-scale
laboratory furnace. Poster Session of the 5th Clean Air - International Conference
on Technologies and Combustion for a Clean Environment, Lisbon, 1999
879. Azevedo, J.L.T., Carvalho, M.G., Hesselman, G., Macphail, J., Roberts, P.A. and
van de Kamp, W.L. - "Performance Prediction in Advanced Pulverized Coal Fired
Utility Boilers-Main Project Conclusions". Fifth International Conference on
Technologies and Combustion for a Clean Environment, Lisboa, Portugal, 12-15
July 1999.
880. Azevedo, J.L.T., Pinheiro, S.S. and Meijer, M., "Modelling steam reformers based
on compact heat exchangers for fuel cell applications", European Seminar on Heat
Exchangers for the Process and Refrigeration Industries, Grenoble, France, 29-30
June 2000.
881. Azevedo, J.L.T., Costa, M., Semião, V. and Carvalho, M.G. - "On the Combined
Combustion of Solid Wastes and Propane in a Laboratory Furnace". Poster Session
Fifth International Conference on Technologies and Combustion for a Clean
Environment, Lisbon, Portugal, 12-15 July 1999.
882. Barreiros, A.: ''The Radiation Interaction With the Turbulent Temperature
Fluctuations in High Radiating Non-Premixed Flames''. Proceedings of the 2nd
International Conference on Computational Heat and Mass Transfer,
COPPE/EE/URFJ, Federal University of Rio de Janeiro, Brazil, October 22-26,
2001.
883. Brasil, A., Farias, T.L. and Carvalho, M.G. - "Morphological and Optical Properties
of Aerosols undergoing Restructuring". AAAR'99 , Tacoma, Washington, E.U.A.,
11-15 October 1999. Abstracts, pp. 277.
884. Brasil, A., Farias, T.L. and Carvalho, M.G. - "Morphological Properties of
Aggregates Undergoing Restructuring". Fifth International Conference on
120
Technologies and Combustion for a Clean Environment, Lisbon, Portugal, 12-15
July 1999, Proceedings, Vol. 11, pp. 1175-1183.
885. Carvalho, M.G., Nogueira, M. and Kayakol, N. – “Methodologies for the
Integration of Modelling and Computational Intelligence Technologies in the
Design of Hierarchical Control Architecture of Glass Melting Furnaces”. XIX
International Congress on Glass (IGC XIX), Edinburg, United Kingdom, 1-6 July
2001.
886. Caldas, M e Semião, V., The path length effect on the total gas absorption
coefficient within a volume element on a axisymmetric computational mesh,
Proceedings of Advances in Computational Heat Transfer II, 2001, Palm Cove,
Australia.
887. Caldas, M e Semião, V., The joint use of patch's mean absorption coefficient and
the discrete transfer method in gas-only environments, Proceedings of 3rd
International Symposium on Radiative Transfer, 2001, Antalya, Turkey.
888. Caldas, M., e Semião, V., Modeling of optical properties for combustion systems .
Proceedings of the 1st Mediterranean Combustion Symposium, The Combustion
Institute/International Center of Heat and Mass Transfer, Antalya, Turkey, 1999
889. Carvalho, M.G. - "Model-based Control in Process Industry". PRES'99 - 2nd
Conference "Process Integration, Modeling and Optimization for Energy Saving
and Pollution Reduction", Budapest, Hungry, 3 Mai - 2 June 1999.
890. Carvalho, M.G. and Nogueira, M. - "Mathematical Modeling in the Glass Melting
Industry". "Glass Industry Towards 2000". XV Conference ATIV - Italian
Association of Glass Technologists, Parma, Italia, 15-17 September 1999.
891. Carvalho, M.G., - "An Integrated Model for the Sustainable Development in South
European Cities". Développement Soutenable du Milieu Urbain, Parlamento
Europeu, Bruxelas, Bélgica, 27 May 1999, Proceedings, pp. 145-147.
892. Carvalho, M.G., Costa, M. and Nogueira, M. - "Emissions and Energy Saving in the
Glass Industry". Glass, Art & Science, International Exhibition and Conference,
Lisbon, Portugal, 14-18 June 1999.
893. Carvalho, M.G., Ramos, J.E. and Pitarma, R.A. - "Characterization of Natural
Convection in a Room Communicating with the Outside Environment through a
Door". PLEA 1999, the 16th International Conference on Passive and Low Energy
Architecture, Brisbane, Australia, 22- 24 September 1999, Proceedings PLEA'99
(Ed. Steven V. Szokolay) , Vol. I, pp. 477-482.
894. Carvalho, M.G., Speranskaia, N., Pipio, A. and Nogueira, M. - "Production
Intensification in Glass-melting - Application of Design Optimization
Methodologies". 5th ESG Conference Glass Science and Technology for the 21st
Century, Praga, República Checa, 21-24 June 1999.
895. Carvalho, M.G., Azevedo, J.L.T., and Nogueira, M., - "Model based control of
industrial combustion equipment". Mediterranean Combustion Symposium,
Antalya, Turquia, 20-25 June 1999.
121
896. Chen, F. Z. and Carvalho, M.G. – “Hydrogen Production from Wastes by
Thermochemical Processes”. 6th International Conference on Technologies and
Combustion for a Clean Environment,O Porto, Portugal, 9-12 July 2001
897. Coelho, L. M. R., Carvalho, M. G., Pasini, S., Antifora, A., Schnell, U. and
Hesselmann, G. - "Numerical Modeling Applied to the Design of a Coal-over-Coal
Rebum Process at Vado Ligure Unit No. 4 (320 MWe). 4th International
Symposium on Coal Combustion". Pequim, China, 18-21 Agosto 1999,
Proceedings (Ed. Xu-Chang Xu, Hai-Ying Qi, Bao-Guo Fan), pp 335-351.
898. Coelho, L., Azevedo, J.L.T. and Carvalho, M.G. - "Comparison of NOx Rendition
Technologies for a Front Wall Fired Boiler". Fifth International Conference on
Technologies and Combustion for a Clean Environment, Lisbon, Portugal, 12-15
July 1999.
899. Coelho, L.M.R., Bigotta, L., Azevedo, J.L.T., Faravelli, T., Hesselmann., G., (2000)
“Analysis of Reburn Technology Using Results from CFD, Detailed Chemical
Kinetic Scheme and Experimental Work.”, Fifht International Conference on
Greenhouse Gas Control Technologies (GHGT-5), Cairns, Australia ,13-16 August
2000.
900. Coelho, P.J., “A Parametric Study of the Heat Transfer in the Convection Chamber
of a Utility Boiler”, 5th European Conference on Industrial Furnaces and Boilers,
Vol. 2, Espinho, 11-14 April 2000.
901. Coelho, P.J., Azevedo, J.L.T., and Coelho, L.M.R., “The Mathematical Modeling of
Utility Boilers at IST”, ASME Int. Mechanical Engineering Congress and
Exposition, Orlando, Florida, 5-10 November 2000. Published in ASME HTD-Vol.
366-5, J.H. Kim (Ed.), New York, pp. 13-20 (2000).
902. Coelho, M.C., Silva, C. M. and Farias, T. L FrotLab - A portable environmental
monitoring and forecasting laboratory for vehicle. “Clean Air VI - sixth
international conference on Technologies and Combustion for a Clean
Environment”, Porto, 9-12 Julho, 2001
903. Coelho, L.M.R., Ramos, P., Azevedo, J.L.T and Carvalho, M.G., “Feasibility study
of a coal-over-coal reburn retrofit in a power plant supported by numerical
modeling.”, 6th International Conference on Technologies and Combustion for a
Clean Environment, Porto 9-12 /7/2001
904. Coelho, M. e Farias, T., "Environmental Impact of Alternative Propulsion Solutions
on Urban Road Transport", Clean Air VI - sixth international conference on
Technologies and Combustion for a Clean Environment”, Porto, 9-12 Julho, 2001.
905. Coelho, L.M.R., Ramos, P., Azevedo, J.L.T. and Carvalho, M.G. - “ Feasibility
Study of a Coal-Over-Coal Reburn Retrofit in a Power Plant Supported by
Numerical Modelling” 6th International Conference on Technologies and
Combustion for a Clean Environment, O Porto, Portugal, 9-12 July 2001.
906. Coelho, P.J. “The Role of Ray Effects and False Scattering on the Accuracy of the
Standard and Modified Discrete Ordinates Methods”, 3rd Int. Symposium on
Radiative Transfer, Antalya, Turquia, 17-22 de June (2001).
122
907. Coelho, P.J. e J. Ströhle, “Different Approaches of the Exponential Wide Band
Model to Radiative Heat Transfer in Nonhomogeneous Media”, 2nd Int. Conf.
Computational Heat and Mass Transfer, Rio de Janeiro, Brazil, 22-26 de October
(2001).
908. Coelho, P.J., T. Quintino, J. Ströhle e J. Teerling, “A Comparative Study of NonGrey Gas Radiation Models“, 6th Int. Conf. Technologies and Combustion for a
Clean Environment, Porto, 9-12 de July (2001).
909. Costa, A., Monteiro, C., Miranda, V., Alves, L. M. and Carvalho, M.G. “Assessment of Renewable Energy using a Geographical Information System”.
Euro Conference on New and Renewable Technologies for Sustainable
Development”, Funchal, Madeira, Portugal, 26-29 June 2000.
910. Cunha, J., Pinheiro, S. and Azevedo, J.L.T. - "Modeling Compact Reformers for
Fuel Cell Applications". Fifth International Conference on Technologies and
Combustion for a Clean Environment, Lisbon, Portugal, 12-15 July 1999.
911. Duic, N. and Carvalho, M.G. - “Experiences and Plans of Portugal in Development
Energy Markets”. FORUM 2000, 9th Forum – Energy Day in Croatia –
Restructuring, privatization and market changes of energy systems, Zagreb, Croatia,
8 December 2000. Proceedings of the HED, pp. 177-189.
912. Duic, N., Alves, L. M. and Carvalho, M.G. - “Kyoto Protocol Objectives by
Promoting the Technology Transfer to Small Island Developing Countries: Santo
Antão, Cape Verde”. CD Version of Proceedings of Euro Conference on New and
Renewable Technologies for Sustainable Development”, Funchal, Madeira,
Portugal, 26-29 June 2000.
913. Duic, N., Costa, A., Alves, L.M. and Carvalho, M.G. - "Facilitating the Acceptance
of Kyoto Protocol Objectives by Promoting the Technology Transfer to Developing
Countries". Working Party Euro Conference on New and Renewable Technologies
for Sustainable Development”, Funchal, Madeira, Portugal, 26-29 June 2000.
914. Duic, N., Costa, A., Alves, L.M. and Carvalho, M.G. - "Facilitating the Acceptance
of Kyoto Protocol Objectives by Promoting the Technology Transfer to Developing
Countries". Working Party on Climate Change - Informal Workshop of the
Portuguese Presidency, Sintra, Portugal, 7-8 February 2000.
915. Duic, N., Jurekovic, T. and Carvalho, M.G. - “Effects of Liberalising the
Portuguese Energy Market”. HED Forum 2001 – 10th Forum – Energy Day in
Croatia. Liberalisation and privatisation of energy sector in economies in transition
and European Union – Experiences and Perspectives, Zagreb, Croacia, 7 December
2001. Proceedings, pp. 83-97. Paper published in Croatian.
916. Eymet, V., Brasil, A.M., Hafi, M. El, Farias, T.L. e Coelho, P.J. “Numerical
Investigation of the Effect of Aggregation on the Phase Function and Scattering
Coefficient of Soot in the Infrared Region”, 3rd Int. Symposium on Radiative
Transfer, Antalya, Turquia, 17-22 de Junho (2001)
123
917. Farias, T. L “Fuel cell Bus, Berlin, Copenhagen, Lisbon” , “Clean Air VI - sixth
international conference on Technologies and Combustion for a Clean
Environment”, Porto, 9-12 Julho, 2001
918. Farias, T. L, -“The Fuel Cell Bus Berlin, Copenhagen and Lisbon: a Sustainable
and Environmental Solution for the Urban Passenger Transportation Sector”,
Transport and Air Pollution: 10th International Scientific Symposium 17-19,
Boulder, CO, USA, September 2001
919. Fontes, P., Costa, M. and Azevedo, J. L. T. (2001). On the flow/combustion
characteristics of an industrial black-liquor recovery boiler. Proceedings of the 6th
Environment, Porto, Portugal, 9-12 July.
920. Garcia, J., Coelho, L. M. R., Simão, C. and Carvalho, M.G., - “Study of the Impact
of Urban Air Quality on Human Health Based in a Children Population – Proposal
for a Model”. Seventh International Conference on Harmonisation within
Atmospheric Dispersion Modelling for Regulatory Purposes, Belgirate, Italy, 28-31
May 2001.
921. Geraldes, V., Semião, V., e Pinho, M.N., Computational fluid dynamics and mass
transfer modeling in nanofiltration spacer-filled slits. Poster Session of the 1999
EURO Membrane Conference, Leuven, Belgium, 1999
922. Geraldes, V., Semião, V., e Pinho, M.N., Nanofiltration mass transfer modeling in
spiral-wound modules using CFD. Proceedings of the 1999 International Congress
on Membranes and Membrane Processes, Toronto, Canada, 1999
923. Geraldes, V., Semião, V., e Pinho, M.N., The use of CFD to model NF mass
transfer in slit laminar flows Poster Session of the 2nd European Congress on
Chemical Engineering, Montpellier, France, 1999
924. Geraldes, V., Semiao, V. e Pinho, M. N., CFD modeling of mass transfer in nf
spiral wound modules with ladder-type spacers, Proceedings of the 6th World
Congress of Chemical Engineering, 2001, Melbourne, Australia
925. Geraldes, V., Semiao, V. e Pinho, M. N., Design and optimization of nanofiltration
spiral wound modules by computer fluid dynamics (CFD), Proceedings of
CHEMPOR’2001, 2001, Aveiro, Portugal
926. Geraldes, V., Semiao, V. e Pinho, M. N., Numerical simulation of the momentum
and concentration boundary layers at the entrance region of a slit with a
nanofiltration membrane wall, Proceedings of 3rd European Congress of Chemical
Engineering, 2001, Nuremberg, Germany.
927. Geraldes, V., Semiao, V. e Pinho, M. N., Mass transfer experiments and CFD
modelling for spacer-filled slits with semi-permeable membrane walls, Proceedings
of Engineering with Membranes, 2001, Granada, Espanha.
928. He, X., Xu, M., Azevedo, J.L.T. and Carvalho, M.G.-"Application of CFD Based
Model Results using On-line Data from Boilers". Fifth International Conference on
Technologies and Combustion for a Clean Environment, Lisboa, Portugal, 12-15
July 1999.
124
929. Hourfar, D., Hirschfelder, A., Haupt, G., Zimmermann, G., Romey, I., Oeljeklaus,
G., Folke, C., e Semião, V., Can IGCC power plants meet utilities' requirements? .
Proceedings of the 2nd International Symposium on Clean Coal Technology,
Beijing, China, 1999
930. Hourfar, D., Hirschfelder, A., Haupt, G., Zimmermann, G., Romey, I., Oeljeklaus,
G., Folke, C., e Semião, V., Requirements of IGCC power plants from utilities'
point of view . Proceedings of the POWER-GEN EUROPE'99, Frankfurt, Germany,
1999
931. Lu, P., Semião, V. and Carvalho, M.G. - "Numerical Prediction of a Swirling
Turbulent Reaction Flow with a Reynolds Stress Transport Model". Poster Session
Fifth International Conference on Technologies and Combustion for a Clean
932. Lu, P.S., Ye, T.H., Costa, M., Semião, V. and Carvalho, M.G. - "Predictions with a
Second Moment Closure Turbulence Model and Experiments of Combined
Combustion of Pulverized Coal and Propane in a Semi-lndustrial Combustor". 4th
International Symposium on Coal Combustion". Pequim, China, 18-21 August
1999, Proceedings (Ed. Xu-Chang Xu, Hai-Ying Qi, Bao-Guo Fan), pp. 356-363.
933. Lu, P. S., Semião, V. and Carvalho, M. G. – “Numerical Prediction of a Swirling
Turbulent Reaction Flow with a Non-linear Second-moment Closure”. 6th
Environment", O Porto, Portugal, 9-12 July 2001.
934. K.-P. Helbig, Coelho, P.J., J. Chamiço, J. Marakis, A. Mbiock, R. Weber and S.
Pasini, “Comparison of Radiative Heat Transfer Methods Using Benchmark Test
Cases”, 3rd Int. Symposium on Radiative Transfer, Antalya, Turquia, 17-22 de June
(2001).
935. Martins, N., Afgan, N., Carvalho, M.G. and Nogueira, M. - "Heat Flux - A Design,
Diagnostic and Control Parameter for Thermal Equipment". IMECE99 - 1999
Intemational Mechanical Engineering Congress and Exposition, Nashville,
Tennessee, E.U.A., 14-19 November 1999. Proceedings of The ASME Heat
Transfer Division, Ed. L.C. Witte, Vol. 364-4, pp. 135-143.
936. Martins, A., Barreiros, A. Pimenta, C., Carvalho, M.G. and Fernandes, M. – “Key
Points for Emissions Trading Strategies for South Europe – Policy Question”.
Working Party on Climate Change - Informal Workshop of the Portuguese
Presidency, Sintra, Portugal, 7-8 February 2000.
937. Neves, M, Gimenez, A. and Carvalho, M.G.-"Development of Advanced Control
Methodologies using Reliable Multidetection Sensors for Boilers". POWERGEN'99, Frankfurt, Germany, 1-3 June 1999.
938. , M. and Carvalho, M.G. - "Development of an Expert System for Energy
Efficiency and Pollution Abatement for Industrial Glass Melting Furnaces". Fifth
125
939. Novo, P. and Carvalho, M.G. - "On the Parallelization of Radiative Heat Transfer
Methods". EPMESC V11 International Conference on Promotion and Enhancement
of Computational Methods in Engineering and Science, Macao, 2-5 August 1999.
940. Pinto P.P., Brasil, A. M., Farias, T.L., “FROTLAB a portable environmental
monitoring and forecasting laboratory for vehicles”. Advances in Model-based
Diagnostic, Monitoring and Optimization – Applications to Environmental and
Industrial Systems, Estoril, Portugal, October 2000
941. Pinto, P.P., Brasil, A . M., Farias, T.L., and Lemke, Renate., . “Fuel Cell: A
sustainable technology for the transportation sector”. Euro Conference - New and
Renewable Technologies for Sustainable Development, Madeira, Portugal, 26-29
June 2000.
942. Pinto, P.P., Brasil, A M., Farias, T.L., . “ECODRIVE: a simulator for educational
environmental and ecological driving behaviour”. Advances in Model-based
Diagnostic, Monitoring and Optimization – Applications to Environmental and
Industrial Systems, Estoril, Portugal, October 2000.
943. Pinto, P.P., Brasil, A. M., Farias, T.L., “POWERGEST:
A numerical code for
the analysis of vehicle dynamics”. Advances in Model-based Diagnostic,
Monitoring and Optimization – Applications to Environmental and Industrial
Systems, Estoril, Portugal, October 2000.
944. Pitarma, R.A., Ramos, J.A.E. and Carvalho, M.G. - "Influência da Radiação Solar
no Transporte Frigorífico Rodoviário de Longa Distância". IX Congresso Ibérico de
Energia Solar, Cordova, Spain, 27-29 March 2000.
945. Prstic, S., Bar-Cohen, A., Afgan, N. H. and Carvalho, M. G. - "Sustainability
Assessment of an Aluminium Heat Sink Design". International Conference on
Compact Heat Exchangers and Enhancement Technology for the Process Industries,
Davos, Switzerland, 1-6 July 2001.
946. Pitarma, R. A., Ramos, J. E. and Carvalho, M.G., -“Occupational Health - Thermal
Comfort”. BioEng'2001 - Sixth Portuguese Conference on Biomedical Engineering,
Faro, Portugal, 11-12 June 2001.
947. P. Lu, V. Semião e M. G. Carvalho, Computational simulation of an isothermal
dump combustor with swirl through a non-linear second-moment closure,
Proceedings of 8th International Conference on Enhancement and Promotion of
Computational Methods in Engineering Science, 2001, Shangai, China
948. P. Lu, V. Semião e M. G. Carvalho, Numerical predictions of a swirling confined
turbulent reaction flow with a non-linear second-moment closure, 6th International
Conference on Combustion Technologies for a Clean Environment, 2001, Porto,
Portugal.
949. P. Lu, V. Semião, D. Schwer e W. Green, Computational study of axisymmetric
coflow partially premixed methane/air flames with Adaptive Chemistry, 6th
International Conference on Combustion Technologies for a Clean Environment,
poster session, 2001, Porto, Portugal.
126
950. Ramos, J.E., Pitarma, R.A. and Carvalho, M.G. - "Modelação Matemática de
Espaços Climatizados". V Ibero and Inter-American Air Conditioning and
Refrigeration Congress, CIAR'99, APIRAC, Lisbon, Portugal, 14-16 October 1999.
951. Rebola, A., Costa, M. and Carvalho, M.G. - “Strategies for the Simultaneous
Reduction of Nox and Particulate Emissions from Heavy Fuel Oil Fired Furnaces”.
Poster session 4-A231 28th International Symposium on Combustion, University of
Edinburgh, United Kingdom, 30 July - 4 August 2000.
952. Schneider, D.R., Duic, N., Bogdan, Z.,: SO3 Reduction in the 210 MW Oil-fired
Power Plant Sisak, Proc. of the 5th European Conference on Industrial Furnaces
and Boilers, Espinho-Porto, 11-14 April 2000.
953. Semião, V., Caldas, M., A new phase function model. 5th International Symposium
on Heat Transfer, Beijing, China, 2000.
954. Semião, V., Geraldes V., and Pinho, M.N.,. CFD modelling of mass transfer in
spacer-filled slits with semi-permeable membrane walls. Proceedings of CHISA
2000-14th International Congress of Chemical and Process Engineering, Praha,
Czech Republic, 2000.
955. Semião, V., Geraldes V., and Pinho, M.N.,. Mass transfer under developing flows
in slits with a NF semi-permeable membrane wall: CFD modelling Poster session
do EUROMEMBRANE 2000, Jerusalem, Israel, 2000.
956. Semião, V., Haupt, G., Zimmermann, G., Hourfar, D., Hirschfelder, A., Romey, I.,
Oeljeklaus, G., andFolke, C., IGCC - The best choice for producing clean power.
POWER-GEN EUROPE 2000, Helsinki, Finland, 2000.
957. Sheng, C. and Azevedo, J.L.T., “Extending the Chemical Percolation
devolatilization (CPD) model from coal to lignin pyrolysis”, 11th International
Conference on Coal Science, USA, 9/2001.
958. Sheng, C. and Azevedo, J.L.T., "Modelling the evolution of particle morphology
during coal devolatilisation ". Proceedings of the Combustion Institute, Reino
Unido, Vol 28 (2000).
959. Silva, P., Costa, M., Semião, V. and Carvalho, M.G. - "Pollutant Characteristics of
lhe Co- combustion of Plastics and Biomass in Boilers". Fifth International
Conference on Technologies and Combustion for a Clean Environment, Lisbon,
Portugal, 12-15 July 1999.
960. Silva, C. M., Farias, T. L., “Effects of the driving behavior on the emissions and
fuel consumption of vehicles equipped with gasoline internal combustion engines”,
“Clean Air VI - sixth international conference on Technologies and Combustion for
a Clean Environment”, Porto, 9-12 July, 2001
961. Silva, C. M., Farias, T. L., “Numerical modeling of the environmental impact of
vehicles equipped with gasoline internal combustion engines vehicles”, submetido
para “17th Annual Mobile Sources/ Clean Air Conference”, Estes Park, Colorado,
11-14 September 2001
127
962. Silva, C. M. and Farias, T. L. - ECODRIVE - a simulator for educational
environmental and ecological driving behavior. “Clean Air VI - sixth international
conference on Technologies and Combustion for a Clean Environment”, Porto, 9-12
July, 2001
963. Toledo, R., Coelho, L.M.R. and Azevedo, J.L.T., “Numerical study on different
configurations of pulverised coal fired furnaces using OFA and reburning.”, 6th
Environment, Porto 9-12/7/2001.
964. Viegas, J.C., Carvalho, M.G. and Saraiva, J. - "Enclosed Fires: Experimental
Research and Validation of a Computer Code". 9th International Conference
CMEM 99 Computational Methods and Experimental Measurements, Sorrento,
Itália, 27-29 April 1999.
965. Viegas, J.C., Carvalho, M.G. and Saraiva, J. - "Study of Natural Ventilation of
Enclosed Fires: Tests and Simulations". INTERFLAM'99 - 8th. Intemational Fire
Science & Engineering Conference, Edinburgh, Reino Unido, 29 June - 1 July
1999, Proceedings (Ed.InterScience Communications), Vol. 1, pp. 579-591.
966. Xu, M., Azevedo, J. L. T., He, X. and Carvalho, M.G. - “ A Novel Model for
Predicting Radiative Heat Transfer, Slagging and Fouling in Pulverized Coal Fired
Boilers”. Poster Session 4-EO5, 28th International Symposium on Combustion,
University of Edinburgh, United Kingdom, 30 July – 4 August 2000.
967. Zitko, V., Afgan, N.,(2) Nucleate Pool Boiling Heat Transfer of Ethyl Alcohol
from Oscillating Surface, Thermal Sciences 2000, The ASME-ZSITS International
Thermal Science Seminar, Bled, Slovenia, June 11-14, 2000.
Papers in Proceedings of National Conferences:
1.
Adam Czaplicki, Miguel Silva, Jorge Ambrósio, Orlando Jesus and João Abrantes.
Biomechanical Analysis Of The Long Jump With Redundant Muscle Force
Prediction, In Proceedings of the VIII Congresso Nacional de Mecânica Aplicada e
Computacional, (Carlos Pina and Carlos Mota Soares, Ed.), Lisboa, Portugal, May
31 – June 2, 2004.
2.
Antunes, F., Dias, J. P. e Pereira, M. S., “Modelos Simplificados Para o Impacto de
Veículos Ferroviários”, Congresso do Métodos Computacionais em Engenharia,
Edited by C. A Mota Soares et all. Lisboa, 31 Maio – 2 Junho, pp. 22 (full paper in
CD-ROM), 2004.
3.
Corrêa, R. e Dias, J. P., “Optimização Multi-Objecto de Veículos Ferroviários com
Algoritmos Genéticos”, Congresso do Métodos Computacionais em Engenharia,
Edited by C. A Mota Soares et all. Lisboa, 31 Maio – 2 Junho, pp. 464 (full paper in
CD-ROM), 2004.
4.
Cadete, R., Dias, J. P. e Pereira, M. S., “Aplicação de Métodos de Aproximação
Sequencial no Projecto Óptimo de Composições Ferroviárias”, Congresso do
Métodos Computacionais em Engenharia, Edited by C. A Mota Soares et all.
Lisboa, 31 Maio – 2 Junho, ág 36 (full paper in CD-ROM), 2004.
128
5.
Dias, J. P. e Pereira, M. S., “Reconstituição de acidentes rodoviários”, Congresso
do Métodos Computacionais em Engenharia, Lisboa, 31 Maio – 2 Junho, Congresso
do Métodos Computacionais em Engenharia, Edited by C. A Mota Soares et all.
Lisboa, 31 Maio – 2 Junho, p. 31 (full paper in CD-ROM), 2004.
6.
H. L. Pina, M. Giestas, A. Joyce e C. Tavares, Modelação de lagos solares por
métodos espectrais: o caso bidimensional, Congresso de Métodos Computacionais
em Engenharia, Lisboa, 2004.
7.
João Pombo and Jorge Ambrósio. Dynamic Analysis Of Railway Vehicles, In
Proceedings of the VIII Congresso Nacional de Mecânica Aplicada e
31 – June 2, 2004.
8.
Paulo Flores, J.C. García Orden, Jorge Ambrósio and J.C. Pimenta Claro. Contact
Models For The Representation Of Joint Clearances In Multibody Mechanical
Systems, In Proceedings of the VIII Congresso Nacional de Mecânica Aplicada e
31 – June 2, 2004.
9.
Paulo Flores, Jorge Ambrósio, J.C. Pimenta Claro and Hamid M. Lankarani.
Modeling Of Joints With Translational Clearances In Planar Multibody Systems, In
Proceedings of the VIII Congresso Nacional de Mecânica Aplicada e
31 – June 2, 2004.
10. Portal, R., Dias, João e Dias, José, “Projecto de Cadeiras de Criança em Situações
de Impacto”, Congresso do Métodos Computacionais em Engenharia, Edited by C.
A Mota Soares et all. Lisboa, 31 Maio – 2 Junho, p. 64 (full paper in CD-ROM),
2004.
11. Santos, J. V. A., Soares, C. M. M., Soares, C. A. M., Maia, N. M. M., " Modelos de
Identificação de Dano com base nas Características Dinâmicas de Estruturas",
Presented at the Conference “Métodos Computacionais em Engenharia”, Lisboa,
May-June 2004.
12. Luís M. Pina, Miguel P. Silva, M. Ayala Botto, “Controlo óptimo robusto de
sistemas afins por troços'', Métodos Computacionais em Engenharia, 14 pages,
Lisboa, Portugal, 2004.
13. Paulo Peças, Elsa Henriques, João Francisco, Pedro Ferreira, Pedro Quinas,
”Aplicação da Metodologia SMED a uma Linha de Enchimento de Garrafas”,
submited to the 4ª Jornadas Politécnicas de Engenharia, Porto, Portugal, 2004.
14. Baptista R., Silva M.B., Fabrico Rápido de Ferramentas de Estampagem e
Prototipagem Virtual do Processo de Estampagem, Workshop do Projecto FRF,
Lisboa, Portugal, 2004.
15. Baptista, R.M.S.O., Plenary Section - “Adding Value and Incrasing Productivity”,
Keynote Presentation, Moulds Event 2004, Marinha Grande, Oliveira de Azeméis,
10 a 15 de Outubro de 2004.
129
16. Alves L. M. M., e Rodrigues J. M. C. ” Aplicação de um novo critério de
plasticidade ao forjamento a frio de materiais sinterizados” 4as Jornadas
Politécnicas de Engenharia Mecânica, Automóvel, Gestão Industrial e Ambiente;
ISEP, Porto, 2004.
17. Barreiros, A.: "Método Simplificado para Avaliação de Valores Instantâneos de
Escalares Passivos", VII Congresso de Métodos Computacionais em Engenharia,
APMTAC, Lisboa, 31 de Maio – 2 de Junho 2004.
18. Barreiros, A. e Roriz, L.: "Avaliação Computacional das Cargas Sensível e Latente
Necessárias para Optimização das Condições de Conforto em Recintos Fechados",
VII Congresso de Métodos Computacionais em Engenharia, APMTAC, Lisboa, 31
de Maio – 2 de Junho 2004.
19. Barreiros, A.: "Simulação do Comportamento Térmico do Habitáculo de um
Autocarro", VII Congresso de Métodos Computacionais em Engenharia, APMTAC,
Lisboa, 31 de Maio – 2 de Junho 2004.
20. Barreiros, A.: ''Utilização de uma Aproximação de Monte Carlo em Programação
Linear Estocástica'', 11º Congresso de Investigação Operacional (IO2004), APDIO,
4-7 Abril 2004.
21. Cunha P.F., Leal V., Bernardo J., Tomás A.; “Abordagem para Definição de
Indicadores Operacionais para Apoio ao Planeamento e Avaliação do Processo de
Fabrico”“; 2ªs Jornadas de Engenharia Mecânica; Porto, (a realizar em Novembro
de 2004).
22. J.E.B.T. Borges, N.H.C. Pereira, "Efeito do número de pás do rotor e da reacção no
rendimento da turbina hidráulica Cross-Flow". Comunicação apresentada no
Congresso de Métodos Computacionais em Engenharia (CMCE2004), Lisboa,
Portugal.
23. Hayashi, T. C., Malico, I., Pereira, J. C. F. (2004). “Modelação da emissão de
poluentes num queimador poroso de duas camadas”. Congresso de Métodos
Computacionais em Engenharia, Lisboa, 31 Maio-2 Junho, 162.
24. J. C. F. Pereira, T. C.Hayashi, I. Malico, (2004). “Mechanical dispersion in laminar
flow in porous ceramic foams”. 2nd Internacional Conference of Application of
Porous Media, Évora, Portugal, 24-27 Maio, 59-66.
25. Hayashi, T. C., Malico, I., J. C. F. Pereira (2004). Comparison of single-step and
multi-step models for the three-dimensional study of a two-layer porous burner. 2nd
Internacional Conference of Application of Porous Media, Évora, Portugal, 24-27
Maio, 369-375.
26. J. P. Magalhães, J. M. C. Pereira, R. Reis e J. C. F. Pereira (2004). “Simulação de
Escoamentos Incompressíveis com Refinamento Anisotrópico”. Congresso de
Métodos Computacionais em Engenharia, Lisboa, 31 Maio-2 Junho, 199.
27. J. M. F. Trindade e J. C. F. Pereira (2004). “Decomposição do Domínio Temporal
no Cálculo Paralelo de Escoamentos de Fluidos”. Congresso de Métodos
Computacionais em Engenharia, Lisboa, 31 Maio-2 Junho,340.
130
28. J. M. M. Sousa e J. C. F. Pereira (2004). “Simulação Numérica do Escoamento
numa trifurcação industrial”. Congresso de Métodos Computacionais em
Engenharia, Lisboa, 31 Maio-2 Junho,341.
29. P. J. S. A. Sousa e J. C. F. Pereira (2004). “Open boundary conditions for the
incompressible navier-stokes equations in staggered grids” Congresso de Métodos
Computacionais em Engenharia, Lisboa, 31 Maio-2 Junho, 348.
30. C. B. Silva e J. C. F. Pereira (2004). “Influência dos Modelos Sub-malha nos
Turbilhões obtidos através de Simulação das Grandes Escalas”. Congresso de
Métodos Computacionais em Engenharia-LNEC, Lisboa, 31 Maio-2 Junho, 437.
31. R. J. A. Howard e J. C. F. Pereira (2004). “Um estudo paramétrico com simulação
das grandes escalas da camada limite atmosférica da Ilha da Madeira”. Congresso
de Métodos Computacionais em Engenharia, Lisboa, 31 Maio-2 Junho, 430.
· C. Silva and J. C. F. Pereira (2004). “On the influence of SGS models upon the
vortices comported from LES”, 10th European Turbulence Conference, Noruega,
29 Junho-2 Julho.
32. Sousa, J.M.M., Pereira, J.C.F. – “Simulação Numérica do Escoamento de Ar numa
Trifurcação Industrial”, VIII Congresso Nacional de Mecânica Aplicada e
Computacional, em Lisboa (Portugal), 31 de Maio - 2 de Junho de 2004 (Eds.,
C.A.M. Soares et al., APMTAC, SEMNI).
33. MATEUS, P., SANTOS, A., COELHO. P. J. e COSTA, M. (2004). Estudo
experimental e numérico de chamas de difusão turbulentas descoladas. Congresso
de Métodos Computacionais em Engenharia, Lisboa, Portugal, 31 May-2 June.
34. P. Mateus, A. Santos, P.J. Coelho and M. Costa, “Estudo Experimental e Numérico
de Chamas de Difusão Turbulentas Descoladas”, Congresso de Métodos
Computacionais em Engenharia, Lisbon, 31/May - 2/June (2004).
35. Poster Presentation “Analysis of barriers to the hydrogen society in EU vs emerging
economies” Fengzhen Chen, Maria Yetano Roche and T.R.C. Fernandes.
Proceedings of International Conference on New and Renewable Energy
Technologies for Sustainable Development. 28th June – 1st July, 2004, Évora,
Portugal.
36. Challenges to the use of Hydrogen as an energy carrier in the EU vs Transition
Economies by Fengzhen Chen , T. R. C. Fernandes, María Yetano Roche, Maria
da Graça Carvalho, presented at the 10th International Energy Conference on
Energy and Society 3-6th May 2004, Lisbon, Portugal.
37. The 2004 European ELE-DRIVE Transportation Conference & Exhibition on
“Urban Sustainable Mobility is possible –now”, Cascais, Portugal 18th to 19th
March 2004. “HySociety The European Hydrogen- Based Society” T.R.C
Fernandes, G.A Gonçalves, Fengzhen Chen & Maria da Graça Carvalho.
38. “Analysis of barriers to the hydrogen society in EU vs emerging economies”
Fengzhen Chen, Maria Yetano Roche and T.R.C. Fernandes. Proceedings of
International Conference on New and Renewable Energy Technologies for
Sustainable Development. 28th July, 2004, Évora, Portugal.
131
39. Challenges to the use of Hydrogen as an energy carrier in the EU vs Transition
Economies by Fengzhen Chen , T. R. C. Fernandes, María Yetano Roche, Maria
da Graça Carvalho, presented at the 10th International Energy Conference on
Energy and Society. 3-6th May 2004, Lisbon, Portugal.
40. M. M. Almeida, M. Coelho and T. L. Farias, Impacte Energético e Ambiental de um
Posto de Abastecimento de Combustível, presented at 8.ª Conferência Nacional de
Ambiente, Lisboa, 27 -29 October 2004.
41. I.F. Ponte, J.F. da Silva, M. Coelho e T. L. Farias, Avaliação do Impacte Energético
e Ambiental de uma Rotunda e sua Comparação com um Cruzamento Semaforizado
num Eixo Rodoviário, presented at 8.ª Conferência Nacional de Ambiente, Lisboa,
27 -29 October 2004
42. M.S. Taborda, M. Coelho e T.L. Farias, Avaliação das potenciais reduções de
emissões de poluentes provenientes da instalação do SATUO – Sistema Automático
de Transportes Urbanos de Oeiras, presented at 8.ª Conferência Nacional de
Ambiente, Lisboa, 27 -29 October 2004
43. Almeida, António e Faria, Luís, “Modelos de Elasticidade Dimensionalmente
Reduzidos”, VII Congresso de Mecânica Aplicada e Computacional, Évora 14 a 16
de Abril, 2003.
44. Barbosa, Inês, Ambrósio, Jorge, Silva, Miguel, Inverse Versus Forward Dynamic
Analysis of the Human Locomotion Apparatus, In Proceedings of the VII
Congresso de Mecânica Aplicada e Computacional, (Joaquim Infante Barbosa, Ed.),
Évora, Portugal, April 14-16, 525-534, 2003.
45. Dias, J. P., Pereira, M. S. e Sousa, L., “Análise e Projecto de Composições
Ferroviárias em Situações de Impacto com formulações de Sistemas de Corpos
Múltiplos”, VII Congresso de Mecânica Aplicada e Computacional, Universidade
de Évora, 14 a 16 de Abril de 2003.
46. Dimitrovová, Z., Advani, S.G., “Escoamentos Viscosos de Fronteira Livre do Nível
Micro e Mesoscópico durante o Processo de RTM”, Acta do VII Congresso de
Mecânica Aplicada e Computacional, pp. 355-364, 14-16 de Abril, 2003, Évora,
Portugal.
47. Dimitrovová, Z., Advani, S.G., “Método numérico de predição de formação dos
vazios durante os processos de fabrico de moldação líquida”, CD de comunicações
e Acta do Congresso de Métodos Computacionais em Engenharia, p. 304, 31 de
Maio - 3 de Junho, 2004, Lisboa, Portugal.
48. Flores, Paulo, Ambrósio, Jorge, Juntas Cinemáticas com Folga em Sistemas de
Corpos Múltiplos, In Proceedings of the VII Congresso de Mecânica Aplicada e
Computacional, (Joaquim Infante Barbosa, Ed.), Évora, Portugal, April 14-16, 535550, 2003.
49. Folgado, J., Fernandes, P. R., Guedes, J. M. e Rodrigues, H., “Qualidade do Osso
Osteoporótico por um Modelo Computacional de Remodelação Óssea”, VII
Congresso Nacional de Mecânica Aplicada e Computacional, Vol. III, pp. 16511660, Évora, Portugal, 2003.
132
50. Gamboa, P., and Suleman, A., “Design of Morphing Airfoils for Improved
Aeroelastic Control,” VII Congresso de Mecânica Aplicada e Computacional,
Évora, Portugal, April 14-16, 2003.
51. Giestas, M., Joyce, A. and Pina, H., Modelling of double diffusive fluid layers:
application to Salt Gradient Solar Ponds, Proceedings of the VII Congresso
Nacional de Mecânica Teórica e Aplicada, Évora, 2003.
52. Gomes, M.A., and Suleman, A., “Spectral Level Set Methods in Topological
Optimization,”
VII Congresso de Mecânica Aplicada e Computacional, Évora, Portugal, April 1416, 2003.
53. Gonçalves, João, Ambrósio, Jorge, Flexible Multibody Tools for the Vehicle Ride
Optimization, In Proceedings of the VII Congresso de Mecânica Aplicada e
54. Gonçalves, Pedro Coelho, Faria, Luís e Cardoso, João Burguete, “Modelos e
Resultados do Processo de Quinagem Utilizando Quinadoras Clássicas e de Avental
em Sandwich com Aplicações à melhoria da Precisão de Quinagem”, VII
Congresso de Mecânica Aplicada e Computacional, Évora 14 a 16 de Abril, 2003.
55. Lage, R.Garcia, Mota Soares, C.M., Mota Soares, C. A. & Reddy, J. N.,
“Modelação de Estruturas Adaptativas utilizando Elementos Finitos Mistos
Multilâmina” , Proc.VII Congresso de Mecânica Aplicada e Computacional, Ed
J.Infante Barbosa, Dep.Física, Universidade de Évora ,Vol.II, pp. 597-606, 2003.
56. Lage, Ricardo, Faria, Luís, Trigo, Tomás Pedro e Madeira, José Aguilar, “Análise e
Optimização de Apoios de Suspensão em Borracha”, VII Congresso de Mecânica
Aplicada e Computacional, Évora 14 a 16 de Abril, 2003.
57. Leite, A., Dimitrovová, Z., Travassos, J., “Projecto e Simulação Numérica de
Estruturas Compósitas Complexas”, Acta do VII Congresso de Mecânica Aplicada
e Computacional, pp. 861-870, 14-16 de Abril, 2003, Évora, Portugal.
58. Loja, M. A. Ramos, Mota Soares, C. M. & Mota Soares, C.A., “Optimização de
Estruturas Piezolaminadas Usando Modelos de Bandas Finitas com B-Splines “,
Proc. VII Congresso de Mecânica Aplicada e Computacional, Ed. J. Infante
Barbosa, Dep. Física, Universidade de Évora, Vol II, pp. 795-807, 2003.
59. Madeira, J. F. Aguilar, Rodrigues, H. and Pina, Heitor, Optimização Topológica
Multi-Objectivo de Estruturas via Algoritmos Genéticos, Proceedings of the VII
Congresso Nacional de Mecânica Teórica e Aplicada, Évora, 2003.
60. Moita, J. S., Mota Soares, Cristóvão M. & Mota Soares, Carlos A., “Controlo
Activo de Estruturas Laminadas com Sensores e Actuadores Piezoelécticos
Incorporados”, Proc. VII Congresso de Mecânica Aplicada e Computacional , Ed. J.
Infante Barbosa, Dep. Física, Universidade de Évora, Vol. I , pp. 301-314, 2003.
61. Moita, J.S., Mota Soares, C. M., & Mota Soares, C. A., “Optimização de Paineis
Laminados com Furos”, Proc. VII Congresso de Mecânica Aplicada e
133
Computacional , Ed. J. Infante Barbosa, Dep. Física, Universidade de Évora, Vol.
II, pp. 809-820, 2003.
62. Neves, M.M.: "Modelo Tridimensional para a Estabilidade Elástica Linearizada de
Sólidos Periódicos Tridimensionais", Proceedings do VII Congresso de Mecânica
Aplicada e Computacional, Universidade de Évora, 14 a 16 de Abril de 2003,
Évora, Vol. II, pp.669-676.
63. Pereira, Manuel Seabra, Milho, João, Ambrósio, Jorge, Tool for Two Dimensional
Crashworthiness Analysis of Trains With Overriding Effects, In Proceedings of the
VII Congresso de Mecânica Aplicada e Computacional, (Joaquim Infante Barbosa,
Ed.), Évora, Portugal, April 14-16, 977-988, 2003.
64. Pombo, João, Ambrósio, Jorge, A General Track Model for Rail Guided Vehicle
Dynamics, In Proceedings of the VII Congresso de Mecânica Aplicada e
65. R. Ruben, J. Folgado e P. R. Fernandes, “Optimização de Forma de Próteses da
Anca com Critério Multi-Carga”, VII Congresso Nacional de Mecânica Aplicada e
Computacional, Vol. III, pp. 1581-1590, Évora, Portugal, 2003
66. Santos, J. V. Araújo, Mota Soares, C. M., Mota Soares, C. A. & Maia, N. M. M.,
“Análise de Erros na Identificação do Dano em Estruturas Laminadas “, Proc.
Congresso de Mecânica Aplicada e Computacional , Ed. J. Infante Barbosa, Dep.
Física , Universidade de Évora, Vol. I , pp. 95-103, 2003.
67. Silva, Miguel, Ambrósio, Jorge, Nova Abordagem á Modelação de Sistemas de
Corpos Múltiplos Utilizando Coordenadas Naturais, In Proceedings of the VII
68. Silva, Miguel, Ambrósio, Jorge, The Influence of Different Physiological Criteria in
the Solution of the Redundant Problem in Biomechanics, In Proceedings of the VII
69. Suleman, A., “Adaptive Structures,” VII Congresso de Mecânica Aplicada e
Computacional, Évora, Portugal, April 14-16, 2003.
70. M. H. F. Melão Barros, C. C. Ferreira e A. F. Melão Barros. “Integração da Tensão
de Compressão no Betão do Modelo do MC90 para Cálculo do Momento Resistente
de Secção Rectangular de Betão Armado e Optimização da Armadura”. VII
Congresso de Mecânica Aplicada e Computacional, Évora (2003).
71. C. C. Ferreira, M. H. F. Melão Barros e A. F. Melão Barros. “Optimização da
Armadura de Secções de Betão Armado em T sob Flexão Simples-Parte I”. VII
72. C. C. Ferreira, M. H. F. Melão Barros e A. F. Melão Barros. “Optimização da
Armadura de Secções de Betão Armado em T sob Flexão Simples-Parte II”. VII
134
73. M. H. F. Melão Barros , C. C. Ferreira e A. F. Melão Barros. “Dimensionamento de
Secções de Betão Armado em Flexão Composta Desviada com o MC90”. VIII
Congresso de Mecânica Aplicada e Computacional, Lisboa (2004).
74. Alves M. L., Rodrigues J. M. C. e Martins P. A. F., “Forjamento de Cruzetas:
Análise Teórica e Experimental”, 3as Jornadas Politécnicas de Engenharia
Mecânica, Automóvel, Gestão Industrial e Ambiente, EST de Coimbra, Coimbra,
2003.
75. Rosa P. A. R., Rodrigues J. M. C. e Martins P. A. F., “Análise Teórica e
Experimental da Inversão de Tubos Metálicos de Parede Fina”, 3as Jornadas
EST de Coimbra, Coimbra, 2003.
76. Alves L. M. M., e Rodrigues J. M. C. ”Simulação Numérica de um Casquilho Autolubrificante Obtido por Enformação de Sinterizados” 3as Jornadas Politécnicas de
Engenharia Mecânica, Automóvel, Gestão Industrial e Ambiente; EST de Coimbra,
Coimbra, 2003.
77. David T., Vilaça P., Quintino L., "Caracterização Metalúrgica do Processo de
Soldadura por Fricção Linear e Comparação com Processos de Soldadura por
Fusão”, “3ªs Jornadas Politécnicas de Engenharia – Produção e Tecnologia
Automóvel”, Universidade de Coimbra, 2003.
78. Ferreira, J.C., Bartolo, P.S., Alves, N.F., “Método para Integrar a Engenharia
Inversa na Mecânica dos Sólidos Computacional para o Fabrico Rápido de
Protótipos Médicos”, proceedings 7º Congresso de Mecânica Aplicada e
Computacional, Vol. 3, 1525-1534, Portugal, 2003.
79. Paulo Peças, Pedro Almeida and Elsa Henriques, “Análise SWOT às Tecnologias
Emergentes da Electro-erosão de Penetração na Indústria dos Moldes de Injecção de
Plástico”, Actas das 3as Jornadas Politécnicas de Engenharia, Coimbra, Cd-Rom,
2003.
80. Paulo Peças, Nuno Aguiar, and Elsa Henriques, “Fresagem a Alta-velocidade de
Aços para Moldes de Injecção de Plástico”, Actas das 3as Jornadas Politécnicas de
Engenharia, Coimbra, Cd-Rom, 2003.
81. Artur Barreiros, “Discretização das Equações de Navier-Stokes Utilizando Splines
Cúbicos”, VII Congresso de Mecânica Aplicada e Computacional, Universidade de
Évora, Vol.3, pp. 1081-1090, 2003.
82. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, J.E.T. Borges, “Um método numérico
para projecto de cascatas de pás de turbomáquinas em regime transónico”. Actas do
VI Congresso Ibero-Americano de Engenharia Mecânica, Universidade de
Coimbra, pp. 1537-1542, 2003.
83. L. M. C. Gato, J. C. C. Henriques, “Comportamento dinâmico do escoamento em
condutas de gás natural a alta pressão”. Actas do 3º Congresso Luso-Moçambicano
de Engenharia, Maputo, pp. 1441-1452, 2003.
84. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, J.E.T. Borges, “Unicidade e existência
de solução para uma formulação inversa de projecto aerodinâmico de cascatas de
135
pás de turbomáquinas em regime transónico”. Actas do Workshop Engenharia’2003
– Inovação e Desenvolvimento, Universidade da Beira Interior, pp. 1-6, 2003.
85. J.E.B.T. Borges, N.H.C. Pereira, "Um novo modelo de perdas para a turbina
hidráulica Cross-Flow". Actas do VI Congresso Ibero-Americano de Engenharia
Mecânica - CIBEM ,6, pp. 1555-1560, Coimbra, Portugal, 2003.
86. J.E.B.T. Borges, N.H.C. Pereira, "Efeito do número de pás do rotor e da reacção no
rendimento da turbina hidráulica Cross-Flow". Comunicação aceite para
apresentação no Congresso de Métodos Computacionais em Engenharia
(CMCE2004), Lisboa, Portugal.
87. Magalhães, M. R., Cortez, N., Abreu, M. M., Conceição, J. M., Raichande, S.
(2003).
88. Morfologia da Paisagem Metropolitana. In Junta Metropolitana de Lisboa (ed.),
“Atlas da Área Metropolitana de Lisboa”, Lisboa.
89. Vieira, R., T. Domingos, P. Canaveira, A. Simões (2003). Análise economicoecológica comparativa da produção de fibras de eucalipto e de cânhamo para a
produção de papel. Actas do II Seminário Agricultura Sustentável e Ambiente, 21
de Março de 2003, Moita - UnI (Universidade Independente) e CID-Amb (Centro
de Investigação e Desenvolvimento em Ambiente).
90. J. M. Pereira, J.Magalhães, J. Trindade e J. C. F. Pereira (2003). “Métodos de
Volume Finito em Malhas Não-estruturdas para Cálculo Paralelo em Escoamentos
de Fluidos”. VII Congresso de Mecânica Aplicada e Computacional. 14-16 Abril,
Évora, Portugal.
91. T. C. Hayashi, I. Malico e J. C. F. Pereira (2003). “ Modelação Tri-dimensional de
uma Chama de Pré-mistura num Queimador Poroso”. VII Congresso de Mecânica
Aplicada e Computacional. 14-16 Abril, Évora, Portugal.
92. R. J. A. Howard e J. C. F. Pereira (2003). “Modelo de Aerogeradores para o
Cálculo das Grandes Escalas”. VII Congresso de Mecânica Aplicada e
Computacional. 14-16 Abril, Évora, Portugal.
93. P. Sousa e J. C. F. Pereira (2003). “ Solution of the 1D and 2D Transient
Convection Equations with High Order Compact Schemes”. VII Congresso de
Mecânica Aplicada e Computacional. 14-16 Abril, Évora, Portugal.
94. J. M. M. Sousa, L. M. G. Silva. – “Método rápido para a previsão de transição sobre
perfis alares baseado na análise de estabilidade linear”, VII Congresso de Mecânica
Aplicada e Computacional. 14-16 Abril, Évora, Portugal.
95. P.J. Coelho, “Simulação Numérica da Transferência de Calor por Radiação numa
Chama de Difusão Turbulenta”, 7º Congresso Nacional de Mecânica Aplicada e
Computacional, Vol. 3, pp. 1219-1230, Évora, 14-16 de Abril (2003).
96. Ana Ponte, Margarida Coelho E Tiago Farias, Impacte Ambiental de uma Estação
de Portagens num Eixo Rodoviário, comunicação em Actas do VII Congresso
Nacional de Engenharia do Ambiente, realizado em Lisboa, Novembro de 2003, 10
pág.
136
97. Lara Moura, Paula Teixeira, Margarida Coelho E Tiago Farias, Matriz Energética e
Ambiental dos Transportes – Aplicação ao Concelho de Cascais, comunicação em
Actas do VII Congresso Nacional de Engenharia do Ambiente, realizado em
Lisboa, Novembro de 2003, 10 pág.
98. Carvalho, M.G. and Nogueira, M. A. – “Utilização de Modelos Matemáticos no
Controlo e Supervisão de Processos Industriais de Combustão”. VII Congresso de
Mecânica Aplicada e Computacional, Évora, 14-16 Abril 2003.
99. Ambrósio, J., Pedersen, S., Hansen, John., Roller-Sprocket Contact Models in the
Dynamics of Roller-Chain Drives, In Novos Desenvolvimentos da Tribologia:
Análise Teórica e Aplicações em Processos Industriais, Actas das 8as Jornadas
Portuguesas de Tribologia, Aveiro, Portugal, 195-202, 2002.
100. Dimitrovová, Z., Travassos, J. “Utilização dos Compósitos Fabricados pelo Método
RTM nas Construções Aeroespaciais”, CD of the Conferência Científica e
Tecnológica em Engenharia, CCTE, May 6-10, 2002, ISEL, Lisbon, (presented by
Z. Dimitrovová).
101. Neves, M. M.: "Estruturas Periódicas para Empacotamento ou Barreiras Acústicas:
Análise e Optimização", Proceedings das 2as Jornadas Politécnicas de Engenharia
Mecânica, Automóvel, Organização e Gestão Industrial, Energia e Ambiente, 13 a
14 de Novembro de 2002, Setúbal.
102. Pedradas, A., Dimitrovová, Z., Travassos, J., “Análise Numérica Experimental de
uma Casca Reforçada em Material Compósito”, CD of the Conferência Científica e
Tecnológica em Engenharia, CCTE, May 6-10, 2002, ISEL, Lisbon, (presented by
A. Pedradas).
103. Silva, J. M. M.“Implementação e Optimização de Sistemas de Controlo de
Condição (Métodos de Apoio à Decisão)” – Conferência Científica e Tecnológica
em Engenharia, Instituto Superior de Engenharia de Lisboa, Lisboa, May 6-10,
2002
104. Alves M. L., Rodrigues J. M. C. E Martins P. A. F., “Optimização da Numeração
Nodal em Simulações Numéricas Tridimernsionais de Processos de Forjamento”,
Ambiente, EST de Setúbal, Setúbal, 2002.
105. Alves L. M. M., Rodrigues J. M. C. E Martins P. A. F. “Simulação Numérica de
uma Válvula de Motor de Combustão Interna Obtida por Enformação de
Sinterizados”, 2as Jornadas Politécnicas de Engenharia Mecânica, Automóvel,
Gestão Industrial e Ambiente, EST de Setúbal, Setúbal, 2002.
106. Gonçalves V.M., Salema A., "Soldadura Laser de Materiais Dissimilares", 2ªs
Jornadas Politécnicas de Engenharia Mecânica, Setúbal, Novembro de 2002.
107. Gonçalves V.M., Salema A., "Soldadura Híbrida Laser/TIG – Modelação
Matemática de Pré-aquecimento para Aços Carbono Micro-Ligado", 2ªs Jornadas
Politécnicas de Engenharia Mecânica, Setúbal, Novembro de 2002.
137
108. Gonçalves V.M., Salema A., "SoldaLaser II – Programa de Cálculo dos Parâmetros
de Soldadura Laser e Análise da Susceptibilidade a Problemas Metalúrgicos", 2ªs
Jornadas Politécnicas de Engenharia Mecânica, Setúbal, Novembro de 2002.
109. Gonçalves V.M., Salema A., "Relação entre Características dos Materiais e
Parâmetros de Soldadura Laser por Keyhole", 2ªs Jornadas Politécnicas de
Engenharia Mecânica, Setúbal, Novembro de 2002.
110. R.Pereira, R.Maltez, C.Machado, P.F.Cunha; Arquitectura de Apoio ao Projecto e
Fabrico de Moldes e Ferramentas; 2ªs Jornadas Politécnicas de Engenharia
Engenharia Mecânica, Automóvel, Gestão Industrial e Ambiente; Setúbal;
Novembro de 2002.
111. P.F.Cunha, J. Dionísio, E. Henriques; An Architecture to Support the
Manufacturing System Design and Planning; International Seminar DET 2002
(Digital Enterprise Technology), Reino Unido, Setembro de 2002.
112. P. Leal, D. Trindade, E. Henriques; “Product Development in Auto-Parts Sector”,
International Conference RPD 2002 – Rapid Product Development”, Portugal,
Outubro 2002.
113. J. C. Páscoa, A. C. Mendes, L. M. C. Gato, “ Projecto de Cascatas de Pás
Rectilíneas Através de um Método Inverso Baseado na Resolução das Equações de
Euler”, Métodos Numéricos en Inginiería V, J. M. Goicolea, C. Mota Soares, M.
Pastor e G. Bugeda (Eds.), SEMNI, Spain, 2002.
114. Magalhães, M. R., P. G. Silva, N. S. Cunha, S. L. Campo (2002). Delimitação da
Estrutura Ecológica Municipal de Loures. Métodos de Análise Espacial para
Interpretação da Paisagem. Actas do Encontro de Utilizadores de Sistemas de
Informação Geográfica, Tagus-Park, Oeiras (Portugal), 2002 (in press).
115. J.E.Ramos; N.A.Martinho; Cristina Barros “Monitorização da Acústica do
Ambiente” no âmbito do Programa Polis em Leiria, Colóquio Monitorização
Ambiental, Leiria, 5 e 6 December de 2002.
116. Nuno A. G. Martinho, Manuel C. G. Silva, João A. E. Ramos “Avaliação do
Conforto Térmico em Veículos - Temperatura Equivalente”, Setúbal: 2as Jornadas
Filipe Didelet, João Ramos, João Mendes (editores), EST Setúbal, ESTG Leiria,
ISEC Coimbra (ISBN 972-8431-17-1) 13 e 14 de November de 2002.
117. Patricia, B e Barreiros, A.: “Avaliação do Comportamento Térmico de Edifícios em
Condições Dinâmicas” 2as Jornadas Politécnicas de Engenharia, Setubal, 2002.
118. Paulo Lima, João Ramos, António Sérgio Pouzada, “Aplicação de Métodos
Numéricos na caracterização térmica de moldes híbridos de injecção com zonas
moldantes em epóxido”, Setúbal: 2as Jornadas Politécnicas de Engenharia
Mecânica, Automóvel, Gestão Industrial e Ambiente, Filipe Didelet, João Ramos,
João Mendes (editores), EST Setúbal, ESTG Leiria, ISEC Coimbra (ISBN 9728431-17-1) 13 e 14 de November de 2002.
119. Sérgio Santos, Epifânio Nicolau, Paulo Carvalho, Nuno Martinho, João Ramos,
“Caracterização Dinâmica de Sistemas de Ar Condicionado em Veículos
138
Automóveis”, Setúbal: 2as Jornadas Politécnicas de Engenharia Mecânica,
Automóvel, Gestão Industrial e Ambiente, Filipe Didelet, João Ramos, João
Mendes (editores), EST Setúbal, ESTG Leiria, ISEC Coimbra (ISBN 972-8431-171) 13 e 14 de November de 2002.
120. Silva, J.M.M., Silva, J.A.B.D., Figueiras, L., Marques, J.D.F.S., Pereira, A.,
"Desenvolvimento de Técnicas de Medição das Forças de Contacto entre Roda e
Carril, em Veículos Ferroviários, em Condições Reais de Funcionamento"
(Development of Techniques for the Measurement of Wheel/Rail Contact Forces in
Railway Vehicles Under Real Working Conditions) – Book of Abstracts of the 4º
Encontro Nacional de Análise Experimental de Tensões e Mecânica Experimental
(4th National Conference on Experimental Stress Analysis and Experimental
Mechanics), APAET, Instituto Politécnico de Bragança, Portugal, 17-19 October
2001.
121. Silva, J.M.M., Siopa, J.M.P., "Implementação de Técnicas de Controlo de Condição
(Metodologia de Apoio à Decisão)" - Book of Abstracts of the 4º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental (4th
National Conference on Experimental Stress Analysis and Experimental
Mechanics), APAET, Instituto Politécnico de Bragança, Portugal, 17-19 October
2001.
122. N.P.C. Marques and J.C.F.Pereira (2000). “An Efficient Implicit Algorithm for the
Solution of the Navier-Stokes Equations”. VI Congresso Nacional de Mecânica
Aplicada e Computacional. 17-19 Abril, Aveiro, Portugal.
123. J.M.M.Sousa, N.P.C. Marques and J.C.F. Pereira (2000). “Coupling Navier-Stokes
Calculations with Linear Stability Analysis in Wing Design”. VI Congresso de
Mecânica Aplicada e Computacional. 17-19 Abril, Aveiro, Portugal.
124. J. M. F. Trindade and J. C. F. Pereira (2000). “Cálculo de sistemas de escape de
motores de explosão" VI Congresso
Nacional de Mecânica Aplicada e
Computacional, Aveiro, Portugal.
125. Alves, L.M, Pipio, A. e Carvalho, M.G. – “Fontes de Energia Novas e Renováveis
em Ilhas e Regiões Remotas”. II Jornadas Insulares de Engenharia, Funchal,
Madeira, 20-22 May 1999.
126. Carvalho, M.G. - "Energia e Desenvolvimento Sustentável”. Ciclo de Conferências
“Perspectivar o Futuro – Engenharia do Ambiente”. Escola Superior de Tecnologia
e Gestão, Instituto Politécnico de Leiria, Leiria, 25 October 2000.
127. Carvalho, M.G. - "O Papel da Cooperação Científica no Desenvolvimento
Sustentável". XIII Congresso 2000 Engenharia e Cultura, Ordem dos Engenheiros,
Oporto, 21-23 September 2000.
128. Coelho, M., Domingos, J. e Farias, T., “Impacte do transporte rodoviário na
poluição do ar. Metodologia de previsão de emissões e dispersão. Aplicação a uma
zona de Lisboa.”, VII Conferência Nacional sobre a Qualidade do Ambiente,
Aveiro, Abril 2001.
139
129. Coelho, P.J., “Influência dos Efeitos Espectrais nos Fluxos Radiativos em Chamas
não Luminosas”, 6º Congresso Nacional de Mecânica Aplicada e Computacional,
Vol. 2, pp. 1441-1454, Aveiro, 17-19 de April (2000).
130. Coelho, P.J., “Influência dos Efeitos Espectrais nos Fluxos Radiativos em Chamas
não Luminosas”, 6º Congresso Nacional de Mecânica Aplicada e Computacional,
Vol. 2, pp. 1441-1454, Aveiro, 17-19 de April (2000).
131. Farias, T. L, - Fuel Cell Buses: A Sustainable and Environmental Technology for
the Urban Passenger Transportation Sector, “7ª Conferência Nacional sobre
Qualidade do Ambiente”, Aveiro, Abril 2001
132. Pitarma, R.A., Ramos, J.A.E. and Carvalho, M.G. - "Influência da Radiação Solar
no Transporte Frigorífico Rodoviário de Longa Distância". IX Congresso Ibérico de
Energia Solar, Cordova, Spain, 27-29 March 2000.
133. Ramos, J.E., Pitarma, R.A. Martinho, N.A. and Carvalho, M.G. – “O Papel da
Modelação Matemática na Optimização da Climatização de Edifícios”. 1as
Jornadas Politécnicas de Engenharia Mecânica Automóvel, Gestão Industrial e
Ambiente, Leiria, 14-16 November 2001
134. Silva, C. M., Brasil, A. M., Farias, T. L., ., “ECOGEST – A numerical code for
analysis of the environmental performances of vehicles”, “ 7ª Conferência Nacional
sobre Qualidade do Ambiente”, Aveiro, April 2001
135. Viegas, J.C., Carvalho, M.G. and Saraiva, J. - "Incêndios em Edifícios. Validação
de um Modelo de Campo para Previsão do Escoamento". VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro, 17-19 April 2000.
Master Thesis
1)
“Multiobjective Optimization with Evolutionary Algorithms of Multibody
Systems”, Ricardo Corrêa, MSc in Mechanical Engineering, Instituto Superior
Técnico. (Conclusion November 2004).
2)
“ Optimal Design of Cellular Materials in Transient Thermal Problems”, Edmilson
Lubrano, MSc in Mechanical Engineering, Instituto Superior Técnico. (conclusion
November 2004).
3)
“Parameter Identification of Multibody Systems with Application to
Crashworthiness of Railway Vehicles”, Filipe Antunes, MSc in Mechanical
Engineering, Instituto Superior Técnico. (Conclusion November 2004).
4)
Ribeiro, A. M. R., Supervisor of the MSc. student Fernando Oliveira, "Estudo das
Propriedades Físicas das Maçãs e seu Relacionamento com o Respectivo Estado de
Maturação por Métodos Não Destrutivos", degree awarded in May 2004. This study
included the building of 2 prototypes.
5)
Eng. Ricardo Bruno de Almeida Peliquito, “Locomoção humana por dinâmica
inversa”, Engenharia Mecânica, Instituto Superior Técnico, Universidade Técnica
de Lisboa, 2004
140
6)
Eng. Tiago João Sá Martins, “Ferramenta computacional para modelação e controlo
de sistemas híbridos'', Engenharia Mecânica, Instituto Superior Técnico,
Universidade Técnica de Lisboa, 2004
7)
Inês Santos, “Experimental and Numerical Studies of the Weldbonding
Technological Process, September 2004.
8)
Maria Beatriz Cipriano de Jesus Silva, “A Aplicação de Prototipagem Virtual à
Análise do Processo de Enformação Plástica de Chapa Fina”, Instituto Superior
Técnico, Março 2004.
9)
Ruben, Rui Miguel Barreiros, “Shape Optimization of Hip Prosthesis”, Instituto
Superior Técnico, Technical University of Lisbon, Concluded in Mai 2003
10) Silva, D. C.C. M. “Determinação de Termos Rotacionais da Resposta Dinâmica por
Técnicas de Análise Modal”, MSc. Thesis, Instituto Superior Técnico, Universidade
Técnica de Lisboa, 29/10/2003. Supervisor: Prof. A. M. Relógio Ribeiro.
11) Rui Alexandre Narciso Miguens Louro, Fault Diagnosis of an Industrial
Actuator Valve, Instituto Superior Técnico, Universidade Técnica de Lisboa,
November,2003.
12) Francisco Mateus Marnoto de Oliveira Campos, Análise e implementação do
controlo de impedância num robô PUMA 562, Instituto Superior Técnico,
Universidade Técnica de Lisboa, June 2003.
13) Pedro Miguel Abreu Silva, Identificação e controlo de processos via
Internet, Instituto Superior Técnico, Universidade Técnica de Lisboa, May
2003.
14) João Miguel Lemos Chasqueira Nabais, Controlo por modo de deslizamento de
robôs flexíveis, Instituto Superior Técnico, Universidade Técnica de Lisboa,
January 2003.
15) Pedro Alexandre Rodrigues Carvalho Rosa, “Inversão Externa de Tubos Metálicos
de Parede Fina”, Instituto Superior Técnico, Julho de 2003.
16) Nuno Miguel Carvalho Pedrosa, “Caracterização Experimental e Modelação
Numérica do Processo de Soldadura por Laser de Díodos, Instituto Superior
Técnico, 2003.
17) Álvaro J. S. Santos. "Estudo da Importância da Radiação na Formação de NOx em
Chamas de Difusão Turbulentas", Universidade Nova de Lisboa, 2003
18) Ronne Toledo, “Modelação e Comparação Numérica de Diferentes Configurações
de Fornalhas de Carvão Pulverizado”, Instituto Superior Técnico, 2003.
19) “Fluid-Structure Interaction Modelling of Nonlinear Aeroelastic Structures”, Licª
Ana Relvas, Supervisor: A. Suleman; 2002.
20)
“Dinâmica Directa de Modelos Biomecânicos Guiados Por Momentos de Força
Intersegmentares”, Student: Inês Barbosa, Advisor: Jorge Ambrósio, 2002.
21) João Diogo Faria Simões Marques, “Desenvolvimento de Técnicas Experimentais
em Dinâmica Ferroviária”, degree awarded in May 2002
141
22) “Comparison of target selection methods in direct marketing”, Sara Alexandra
Cordeiro Madeira, Adv. J. M. da Costa Sousa, Instituto Superior Técnico,
Universidade Técnica de Lisboa, September 2002.
23) “Análise de documentos Antigos por Processamento de Imagem”, Anabela Pelorito
Velez , Adv. J. R. Caldas Pinto, Instituto Superior Técnico, Universidade Técnica de
Lisboa, Maio 2002.
24) “Ancient Music Optical Recognition”, Pedro Alexandre Mateus Vieira, Adv. J. R.
Caldas Pinto, Instituto Superior Técnico, Universidade Técnica de Lisboa, Março
2002.
25) “Controlo de posição em anel fechado de um braço robot”, Sérgio Palma
Fernandes, Adv.s J. R. Caldas Pinto and J. M. G. Sá da Costa, Instituto Superior
Técnico, Universidade Técnica de Lisboa, Maio 2002
26) Weather forecasting in continental Portugal using MM5, Tânia Sousa, J. J. Delgado
Domingos, November 2002
27) Milho J F, “Dinâmica Planar de Veículos Ferroviários em Condições de Impacto”,
(Advisor: Jorge Ambrósio) IST, 2000.
28) Moniz P A, “Controlo Experimental de Flutter em Estruturas Aeronáuticas”, IST,
2000.
29) Manuel Seixas" Dinâmica de Aterragem de
Pseudolites",Advisor: A. Suleman,J. R. Azinheira,2000
Precisão
Utilizando
30) Gonçalo Pedro "Self-Propulsion in Adaptive Underwater Structural
Systems",Advisior: Afzal Suleman,N. Djilali da Univ.Victoria, CAD,2001
31) Stan Burns "Design of Inchworm Actuators",Adviser: A.Suleman,2001
32) Rui N.F. Cadete "Colisões em cadeias de corpos multiplos e aplicações no impacto de
composicções ferroviárias",Advisor: M. Seabra Pereira,2001
33) “Métodos de Condensação em Dinâmica Estrutural” (Condensation Methods in
Structural Dynamics), - Scientific Supervisor: Maia, N.M.M.. Author: Almeida,
R.A.S.B., Degree awarded by Instituto Superior Técnico, Technical University of
Lisbon, Portugal, Oct. 1999.
34) “Caracterização Dinâmica de Juntas em Estruturas Complexas” (Dynamic
Characterization of Joints in Complex Structures), - Scientific Supervisor: Maia,
N.M.M.. Author: Silva, P.L.C.C., Degree awarded by Instituto Superior Técnico,
Technical University of Lisbon, Portugal, March 2000.
35) F. Marcolino, “Reconhecimento Gráfico de Palavras em Documentos Antigos”,
MSc Thesis, Instituto Superior Técnico, Universidade Técnica de Lisboa, 2001
(advisor: Prof. Caldas Pinto).
36) S. Silva, “Acoustic noise cancellation using fuzzy systems”, Instituto Superior
Técnico, Technical University of Lisbon, July 2001. (advisors: J. M. C. Sousa, J. Sá
da Costa).
142
37) Moutinho, “Soluções Alternativas para a Navegação de um Veículo Autónomo
Exterior”, Instituto Superior Técnico, Universidade Técnica de Lisboa, Jul 2001.
(advisor: J. R. Azinheira).
38) F. Ramalho, "Modelação de um Veículo Autónomo", Instituto Superior Técnico,
Universidade Técnica de Lisboa, May 2000. (advisor: J. Azinheira).
39) H. Oliveira, "Integração do GPS com Microsensores Inerciais e Altitude
Barométrica para uma Aeronave Não Tripulada", Instituto Superior Técnico,
Universidade Técnica de Lisboa, March 2000. (advisor: J. Azinheira).
40) J. A. J. Borges,“Linearização por realimentação entrada-saída de sistemas nãolineares discretos descritos em espaço de estados”, Instituto Superior Técnico,
Universidade Técnica de Lisboa, 2001. (advisor: M. Ayala Botto).
41) J. C. P. Reis, "Estudo da dinâmica de um Corpo em Movimento por Visão
Computacional", Instituto Superior Técnico, Technical University of Lisbon, 2001.
(advisor: M. Ramalho).
42) J. Lagoa, "Representação Matricial de Redes Neuronais", Instituto Superior
Técnico, Universidade Técnica de Lisboa, 1999. (advisor: A. G. Portela).
43) J. M. M. Martins, “Controlo robusto de manipuladores com flexibilidade
mecânica”, Instituto Superior Técnico, Universidade Técnica de Lisboa, Oct. 2000.
(advisor: J. Sa da Costa).
44) L. Nunes, "Controlo Activo de Ruído em Carruagens de Metropolitano", Instituto
Superior Técnico, Universidade Técnica de Lisboa, Oct. 2000. (advisor,: J. Sá da
Costa).
45) L. Sousa, “Desenvolvimento da Plataforma R-ANT”, Instituto Superior Técnico,
Universidade Técnica de Lisboa, Oct 99. (advisor: J. Azinheira).
46) M. A. C. S. Coelho – “Using the Hartstone Uniprocessor Benchmark for Fieldbus
Performance Evaluation”, Instituto Superior Técnico, Universidade Técnica de
Lisboa, July 1999, (advisor: Prof. Carlos Cardeira).
47) M. J. G. C. Mendes, “Fault detection and diagnosis based on fuzzy hiererchical
techniques” (in Portuguese), Instituto Superior Técnico, Technical University of
Lisbon, April 2001. (advisors: and J. Sá da Costa, J. M. C. Sousa).
48) M. Seixas, "Dinâmica de Voo de Aeronaves em Aterragens de Precisão com
Pseudosatélites", Instituto Superior Técnico, Universidade Técnica de Lisboa, Jun
2000. (advisor: A.Suleman, J. Azinheira).
49) P. Hoekstra , “Design of an analytical constrained predictive controller”, Faculty of
Information Technology and Systems, Technical University of Delft, The
Netherlands, 2000. (advisor: T. van den Boom, M. Ayala Botto).
50) P. Pinto, “Advanced Monitoring System for Plastics Processing”,Instituto Superior
Técnico, Universidade Técnica de Lisboa, July 1999, (advisor: C. Cardeira).
51) R. Cohen, "Simulação e Controlo de Navios", Instituto Superior Técnico,
Universidade Técnica de Lisboa, Jan. 2000. (advisor: J. Sá da Costa).
143
52) Valério, “Projecto de controladores contínuos usando cálculo diferencial e integral
de ordem não inteira”,Instituto Superior Técnico, Technical University of Lisbon,
July 2001. (advisor: J. Sá da Costa)
53) Daniel Jorge Viegas Gonçalves “Planeamento e Acções: Uma abordagem
Integrada”, Advisor: João Pavão Martins, 2000
54) Cláudia Martins Antunes “Sistema de Aquisição de Conhecimento para apoio à
Consulta de Sub-Visão”, Advisor: João Pavão Martins, 2001
55) Inês Lynce Faria “Algebraic Simplification Techniques for Propositional
Satisfiability”, Advisor: João Pavão Martins, 2001
56) César Figueiredo Pimentel “Revisão premissiva de crenças: teoria e aplicação”,
Advisor: Maria dos Remédios Cravo, 2001
57) "Aplicação de Técnicas de Prototipagem Rápida à Produção de Eléctrodos para
Electroerosão por penetração", Artur J.S. Mateus, Prof. J.C.Ferreira, 2000.
58) "A Engenharia Inversa Integrada com a Simulação Numérica Aplicada à Produção
de Peças e Ferramentas", Nuno M.F.Alves, Prof. J.C.Ferreira, 2000.
59) "Forjamento de Precisão a Frio de Engrenagens de Dentes Rectos", Maria
Leopoldina Mendes Ribeiro de Sousa Alves, Prof. P.A.F. Martins, 2000.
60) Carlos Fernando Loução Soares "Análise energética e ambiental de sistemas de
climatização”. Finished in 1999. Supervised by M.N.P.Águas and Paulo Cadete
Ferrão
61) Salústio Leandro” Energia em Edifícios” M.N.P.Águas and José Delgado
Domingos
62) Jorge Raposo "Caracterização experimental de escoamentos através de um meio
poroso cerâmico", supervisor Prof. J. C. F. Pereira, 1999.
63) Jorge Trindade: "Cálculo de Sistemas de Escap e de Motores Diesel", supervisor
Prof. J. C. F. Pereira, 1999.
64) Rui Barata: "Geração de Malhas usando Algoritmos Evolutivos", supervisor Prof. J.
C. F. Pereira, 2000
65) Célia Gouveia: "Estudo das condições climatológicas na Região próxima de
unidades cimenteiras", supervisor Prof. J. C. F. Pereira, 2000.
66) Pedro Alexandre Salvada: “Modelação da Câmara de Combustão de uma Turbina
de Gás “, Advisor: Pedro Coelho,1999
67) José A. T. Azevedo “Combustão Simultânea de Resíduos Sólidos Industriais com
Gás numa Fornalha Semi-Industrial”, Advisor: Mario Costa, 1999
68) Sergio Pinheiro “Modelação Numérica de um Reactor de Placas para Reformação
Catalítica de Gás Natural”, Advisor: João Toste Azevedo, Agosto de 1999
69) Mária J.F.R.V.Melo “Atomização de um Jacto Simples de Líquido Assistido a Ar”,
Advisor: Mario Costa, 1999
144
70) José Nuno Pereira de Melo Pinto Lopes “Modelação de chamas de difusão
turbulenta em geometrias confinadas com simetria axial”, Advisor:Viriato Semião,
October 2000.
71) Amândio J. B. Rebola (IST) “Emissões de Poluentes Gasosos e Partículas numa
Fornalha Semi-Industrial a Fuelóleo Residual”, Advisor: Mario Costa, 2001.
Doctoral Dissertations
1)
"Structural Optimization Techniques Applied to Orthopedic Implants Design", Eng.
João Orlando Folgado. PhD in Mechanical Engineering, Instituto Superior Técnico,
UTL, Junho 2004.
2)
Multidisciplinary Design Optimization using Level Set Theory”, M.A. Gonçalves
PhD in Mechanical Engineering, Supervisor: A. Suleman, Instituto Superior
Técnico, UTL, December 2004.
3)
“Development of Experimental and Computational Models for Active Aeroelastic
Control of Flexible Aircraft”, Paulo A. Moniz, Supervisor: A. Suleman , PhD in
Mechanical Engineering, Instituto Superior Técnico, UTL, December 2004.
4)
“Development of Computational Algorithms for Modelling Nonlinear
Aeroelasticity”, Ana Filipa Caetano Relvas, Supervisor: A. Suleman, PhD in
Mechanical Engineering, Instituto Superior Técnico, UTL, December 2004.
5)
“ A Multibody Methodology for Railway Dynamics Applications”, João Carlos Elói
Jesus Pombo, Supervisor: Jorge Ambrósio, PhD in Mechanical Engineering,
Instituto Superior Técnico, UTL, Outubro 2004.
6)
“Modelling of Adaptive Structures”, José Eugénio Semedo Garção, PhD in
Mechanical Engineering, Instituto Superior Técnico, UTL, Outubro 2004.
7)
“Multiobjective Optimization of the Topology of Structures with Genetic
Algorithms”, José F. Aguilar Madeira, PhD in Mechanical Engineering, Instituto
Superior Técnico, UTL, May 2004.
8)
V. Cortes, "Identificação de Parâmetros da Dinâmica do Dirigível Aurora AS800",
PhD thesis, Mar 2004
9)
Maria Leopoldina Mendes Ribeiro de Sousa Alves, “Modelação Numérica e
Análise Experimental de Operações de Forjamento”, Maio de 2004.
10) “Estudo do Polimento por Electro-erosão e do seu Potencial de Exploração no
Fabrico de Moldes de Injecção de Plástico”, Engenheiro Paulo Peças, 2004.
11) Non-destructive Evaluation of Welded Construction, César Almeida Boynard,
Luisa Quintino, Setembro 2004.
12) Orlando N. C. Silva, “Aplicação do Modelo de Flamelets Laminares à Simulação de
Escoamentos Turbulentos Reactivos”, University of Évora, 2004
145
13) “ Human Motion Analysis Using Multibody Dynamics and Optimization Tools”,
Miguel Pedro Tavares da Silva, Supervisor: Jorge Ambrósio, PhD in Mechanical
Engineering, Instituto Superior Técnico, UTL, December 2003.
14) Martins, I, L. S. “Desenvolvimento de Accionamentos Electromagnéticos para a
Suspensão de Veículos Automóveis”, PhD. Thesis, Instituto Superior Técnico,
Universidade Técnica de Lisboa, 11/02/2003. Co-Supervisor: Prof. F. A. Pina
daSilva
15) Sampaio, R. P. C., “Identificação de Dano Estrutural através de Técnicas de Análise
Dinâmica”, PhD. Thesis, Instituto Superior Técnico, Universidade Técnica de
Lisboa, 5/6/ 2003. Supervisor: Prof. N. M. M. Maia.
16) A.Fonseca, Ensaios em Voo e sua Aplicação à Análise de Estabilidade de
Aeronaves, Instituto Superior Técnico, Universidade Técnica de Lisboa, June
2003
17) Matos P.A., Elaborating and Using McCharthy’s Approach to Model common
Sense Reasoning, Ph.D. Thesis, 2003.
18) Saldanha R., Afectação de Tripulações: Um Propagador de Restrições Global para a
Geração de Turnos. Instituto Superior Técnico. Tese de Doutoramento.
19) Bárbara Perry Pereira Alves Gouveia Almeida, “Estudos Teóricos e Experimentais
no Domínio da Enformabilidade e do Regime Estacionário de Processos de
Deformação Plástica na Massa”, Instituto Superior Técnico, Julho de 2003.
20) Pedro Miguel dos Santos Vilaça da Silva, “Fundamentos do Processo de Soldadura
por Fricção Linear – Análise Experimental e Modelação Analítica”, Instituto
Superior Técnico, 2003.
21) Inês da Fonseca Pestana Ascenso Pires, “Ligação por Adesivos da Liga 2024-T3”,
Instituto Superior Técnico, 2003.
22) Maria Alexandra Sousa Rodrigues, “Soldadura Laser de Pastilhas de Carboneto de
Tungsténio a Aço”, Instituto Superior Técnico, 2003.
23) José António Caldeira Duarte, Sistema de Planeamento e Controlo dos Sistemas
Produtivos, Doutoramento em Ciências de Engenharia, Orientador Prof. Luís
Maltez, Instituto Superior Técnico, Fevereiro, 2003.
24) João Carlos de Campos Henriques “Resolução das Equações de Euler em
Escoamento Compressível Tridimensional Usando o Modelo Multidimensional de
Distribuição de Resíduo”, advisor Luís Manual de Carvalho Gato, em Julho de
2003
25) José Manuel da Silva Chaves Ribeiro Pereira, "Técnicas de Volumes Finitos de
Elevada Ordem de Precisão para a Solução de Escoamentos de Fluidos
Incompressíveis", Jul 03
26) Paulo M. M. Fontes (IST). "Caracterização Experimental e Modelação Numérica de
uma Caldeira de Recuperação de Lixívia Negra", Instituto Superior Técnico, 2003.
146
27) Martins, I. – Development of Electromagnetic Actuators for Vehicle Suspensions co-supervision. Degree awarded in February 2003.
28) Interacção Fluido-Estrutura na Dinâmica Linear e Não-Linear de Rotores, Miguel
Ângelo Pereira Bento Moreira, Prof. Heitor Pina, 2002
29) Modelos de Elementos Finitos na Optimização de Estruturas Adaptativas em
Materiais Compósitos, Victor M. R. Franco Correia, Prof. Cristóvão Mota Soares,
30-Jan-2002.
30) Métodos de Optimização de Sistemas Mecânicos Rigido-Flexiveis Para Aplicação à
Dinâmica de Veículos Automóveis. Student: João Pedro Gonçalves, Advisor: Jorge
Ambrósio, Instituto Superior Técnico, Universidade Técnica de Lisboa, 2002.
31) Active Aeroelastic Aircraft Structures, Lt-Cor P. Costa, Supervisor: A. Suleman;
Instituto Superior Técnico, Universidade Técnica de Lisboa, 2002.
32) Controlo Inteligente de Posição e de Força de Robôs Manipuladores, Silvério João
Crespo Marques, Adv. J. M. G. Sá da Costa, Instituto Superior Técnico,
Universidade Técnica de Lisboa, February 18, 2002.
33) Nelson Pereira Caetano Marques: Métodos Implícitos sem Matriz para a Resolução
das Equações de Euler e Navier-Stokes (Fevereiro 2002)
34) Pedro José Alves Vieira Novo “Parallel Simulation of Radiative Heat Transfer”,
Advisor: Maria da Graça Carvalho and Pedro Coelho, 2001
35) Taohong Ye “Simulação numérica da combustão de partículas sólidas-carvão,
biomassa e resíduos”, Advisor: Viriato Semião, Julho 2001
36) Pisi Lu “Caracterização e modelação da combustão de resíduos sólidos como
combustíveis auxiliares”, Advisor: Viriato Semião, Dezembro de 2001
37) “Desenvolvimento de Métodos Aplicáveis ao Ajuste de Modelos Dinâmicos de
Sistemas Mecânicos” (Development of Methods Applicable to the Updating of
Dynamic Models of Mechanical Systems) - Scientific Supervisor: Silva, J.M.M..
Author: Morais, P.J.G.. Degree jointly awarded by the Federal University of Rio de
Janeiro, Brazil, and by LNEC (National Laboratory of Civil Engineering), Portugal,
October 2001.
38) Carlos Silva: “The role of coherent structures in the control and interscale
interactions of round, plane and coaxial jets”, supervisor, Prof. Olivier Métais, cosupervisor Prof. J. C. F. Pereira 2001
39) Helena Sofia Andrade Pinto “Ontology Integration: Characterisation of the Process
and Methodology to Perform it”, Advisor: João Pavão Martins, 2001
40) António Menezes Leitão “Reengenharia de Programas”, Advisor: João Pavão
Martins, 2001
41) Pedro Cunha " Modelo Integrado do Planeamento dos Processos e da Produção",
Advisor Ruy Mesquita, 2001
42) Isabel Malico: “Modelação e Cálculos de Sistemas de Combustão com Pré-Mistura
no Interior de Meios Porosos”, supervisor Prof. J. C. F. Pereira 2001
147
43) Giestas M " Dynamics of Double Diffusion: Application to Solar Ponds", IST/UTL,
2000
44) Moita J S, “Projecto Óptimo de Estruturas Laminadas com Comportamento
Geometricamente Não-Linear”, UTL/IST,2000.
45) Neves M M, "Modelos Materiais em Optimização de Topologia de Estruturas com
Critérios de Carga Crítica",UTL/IST, Lisboa,2000.
46) Sedaghati R. "Structural Optimization of Nonlinear Structures using the Finite
Element Method", Advisor: A.Suleman,B. Tabarrok da Univ. Victoria, CAD,2000
47) Augusto César de Mendonça Brasil “Morphological Characterization of Fractal-like
Aggregates”, Advisor: Maria da Graça Carvalho, October, 2000
48) Vitor Manuel Geraldes Fernandes “Estudo numérico e experimental de
escoamentos e transferência de massa em módulos enrolados em espiral para
nanofiltração eosmose inversa”, Advisor:Viriato Semião and Norberta de Pinho,
October, 2000
49) L. F. Baptista, "Adaptive Force and Position Control of Rigid Manipulators
Interacting with Non-rigid Environments", PhD Thesis, Instituto Superior Técnico,
Universidade Técnica de Lisboa, 2000. (advisor: J. Sá da Costa).
50) Elsa Mª Pires Henriques "Modelo de Optimização do Corte por Arranque da Apara
para Planeamento Integrado do Processo e da Produção", Advisor Ruy Mesquita,
2000
51) Paulo A.P. Justino, Modelação Matemática e Simulação Numérica do
Comportamento Dinâmico duma Central de Coluna de Água Oscilante para
Extracção de Energia das Ondas (Mathematical modelling and numerical simulation
of the dynamical performance of an oscillating-water-column wave energy
converter), Doctoral thesis, Instituto Superior Técnico, Universidade Técnica de
Lisboa, 157 pp, 2000 (supervisor: António F. de O. Falcão)
52) Nelson Amadeu Dias Martins "A New Heat Flux Meter for High Temperature
Harsh Environment “, Advisor: Maria da Graça Carvalho, 1999
53) João Carlos Godinho Viegas "Segurança em Caso de Incêndio. Simulação de
Movimentos de Fumos no Interior de Compartimentos", Advisor: Maria da Graça
Carvalho, Julho 1999
54) “Desenvolvimento de Técnicas de Análise Dinâmica Aplicáveis à Modificação
Estrutural” (Development of Dynamic Analysis Techniques for Structural
Dynamics) - Scientific Supervisor: Silva, J.M.M.. Scientific Co-supervisor: Maia,
N.M.M.. Author: Ribeiro, A.M.R.. Degree awarded by Instituto Superior Técnico,
Technical University of Lisbon, Portugal, November 1999.
55) “Crack Characterization by Means of Dynamic Analysis"– Scientific Supervisor:
Silva, J.M.M.. Author: Gomes, A.J.M.A.. Degree awarded by Instituto Superior
Técnico, Technical University of Lisbon, Portugal, February 1999.
56) Dias J M P, “Análise de Sensibilidades e Optimização de Sistemas Mecânicos
Rígido-Flexíveis", UTL/IST,1999.
148
57) J. Norberto Pires, "Force Control in Industrial Manipulators", PhD Thesis, FCT,
University of Coimbra, 1999. (advisor: J. Sá da Costa).
POST-DOCT.
1) Shangwu Xiong, Numerical Simulation of the Rolling Proc, 2003
2) Li Chang Sheng, Aplication of Meshless Methods to Bulk Metal Forming, 2003
3) Danut Iordachescu, Arc Vision – Control and Monitoring in Arc Welding, 2003
4) “Simulação numérica da combustão de partículas sólidas – carvão, biomassa e
resíduos”, Student: Taohong Ye , Advisor: Prof. Viriato Semião, March 1999 to
December 2002
5) Matthew Lamport Kaplan “Computational models of the locomotion apparatus for
functional neuromuscular stimulation”, Adviser J. Ambrósio, 2001
6) Eugen Sfartz “Wavelets Based Methodologies for Nonlinear Deformations and
Impact of Flexible Multibody Systems”, Adviser: J. Ambrósio, 2001
7) Post-Doctoral Research Fellowship, Numerical Simulation of Rolling, Shangwu
Xiong, Prof. P.A.F. Martins, since 1998.
Technical Reports
1.
J. P. Dias and M. S. Pereira, “Driver’s passive safety”, Report, Task 5, Eucab,
Modtrain, Project FP6-PLT-506652, 2004.
2.
J. Dias, Accident reconstruction reports, to Lisbon, Coimbra, Vouzela, Setúbal,
Condeixa and Grândola, courts.
3.
Miguel Silva, Jorge Ambrósio, Human Motion Analysis Using Multibody
Dynamics and Optimization Tools, Technical Report IDMEC/CPM-04/001,
IDMEC, Instituto Superior Técnico, 2004.
4.
M Hecht, F. Al-Saleh, B, Filová, J. P. Dias and M. S. Pereira, “Safetrain
Integration”, Report, Task 4.2, EuCab, Modtrain, Project FP6-PLT-506652, 2004
5.
Martins C., Pimentel E., Martins P. A. F., Rodrigues J. M. C., Relatório do projecto
IST/MPSA - “Medição Experimental das Forças de Compressão da Borracha da
Junta das Chapas Testa para Intercoolers” , IST, Maio 2004.
6.
Martins C., Pimentel E., Martins P. A. F., Rodrigues J. M. C., Relatório do projecto
IST/MPSA - “Medição Experimental das Forças de Compressão da Borracha da
Junta das Chapas Testa para Intercoolers - Adenda” , IST, Maio 2004.
7.
Martins P. A. F., Relatório de execução do projecto FCT POCTI/EME/44423/2002
- “Meshless Form – Development of Meshless Methods for Metal Forming
Applications” (Ano de execução 2003/2004), IST, Julho 2004.
149
8. V. Gonçalves, SCINOX – Ligações Híbridas Soldo-coladas de Juntas de Aço
Inoxidável Aplicadas a Veículos Ferroviários – Projecto IDEIA/ADI.
9. Study “Tendências Tecnológicas na Indústria de Moldes”, in collaboration with
CENTIMFE, CEFAMOL, 2004
10. Study Estudo “Tendências em Novos Materiais na Indústria de Moldes”,
CENTIMFE, CEFAMOL, 2004
11. Baptista R., Silva M.B., Relatório do projecto FRF – PPS4 – Ferramenta
Protótipo para estampagem – Actividade 4.1 – “Caracterização dos Materiais”,
IST, Janeiro 2004.
Protótipo para estampagem – Actividade 4.1 – “Caracterização de Materiais”,
IST, Julho 2004.
Protótipo para estampagem – Actividade 4.2 – “Definição e Simulação da
Enformação das Geometrias Alvo”, IST, Julho 2004.
14. Pereira, H., T. Domingos, L. Vicente (eds.) (2004). State of the Assessment
Report. Avaliação Subglobal de Portugal do Millennium Ecosystem Assessment.
15. Rodrigues, J., T. Domingos (2004). Irreversibility in the exploitation of renewable
resources with variable carrying capacity. Instituto Superior Técnico, Lisboa.
16. Costa, M., Coelho, P. J., Santos, A. E Mateus, P. (2004). Investigação
experimental e numérica da importância da radiação na formação de NOx em
chamas de difusão turbulentas. 2º Relatório de Progresso Anual, Projecto
POCTI/EME/ 37410/2001, Instituto Superior Técnico.
17. Costa, M. E Rebola, A. (2004). Estudo e Implementação de Estratégias para a
Redução Simultânea de NOx e Partículas em Fornos a Fuel-óleo. Relatório Final,
Projecto POCTI/EME/43622/2000, Instituto Superior Técnico.
18. Fengzhen Chen. Review of the development of renewable hydrogen supplied for
islands. Instituto Superior Tecnico, Portugal, 2004.
19. Martins C., Rosa P., Pimentel E., Martins P. A. F., Rodrigues J. M. C., Relatório
do projecto IST/MPSA – “Medida Experimental das Forças de Enformação das
Ferramentas de Teste da Chapa Testa Toyota Avensys”, IST, Junho 2003.
do projecto IST/MPSA – “Evolução das Forças de Enformação na 2ª e 3ª
Operação da Ferramenta de Teste da Chapa Testa Toyota Avensys”, IST, Junho
2003.
21. Rodrigues J. M. C. e Martins P. A. F., Relatório do projecto INAUTO/CEIIA “Estampagem de uma Peça Cilíndrica – INCOMPOL - Protótipo de Novo
Inserto”, IST, Junho 2003.
do projecto IST/MPSA – “Forças de Enformação na 2ª Operação da Ferramenta
150
de Teste da Chapa Testa Toyota Avensys – Após Alteração das Dimensões do
Encostador”, IST, Julho 2003.
23. Martins C., Pimentel E., Silva B., Martins P. A. F., Rodrigues J. M. C., Relatório
do projecto IST/MPSA – “Caracterização Mecânica dos Alumínios Designados
por ‘Al JP’ e ‘Al JD’ – João de Deus”, IST, Julho 2003.
24. Faria P., Dias M., Baptista R., Relatório do projecto INAUTO – “WP5.1 – Caso
de Estudo 1 – Comparticipação AgilTec (Formulação Inversa)”, Junho 2003.
25. Baptista R., Silva M.B, Rosa P., Relatório do projecto INAUTO – “WP5.1 – Caso
de Estudo 1 – Comparticipação IST (Formulação Dinâmica)”, Junho 2003.
26. Faria P., Baptista R., Costa R., Relatório do projecto INAUTO – “WP5.1 – Caso
de Estudo 2 – Comparticipação AgilTec (Formulação Inversa)”, Junho 2003.
27. Baptista R., Silva M.B, Relatório do projecto INAUTO – “WP5.1 – Caso de
Estudo 2 – Comparticipação IST (Formulação Dinâmica)”, Junho 2003.
28. Faria P., Baptista R., Relatório do projecto INAUTO – “WP8 – Manual de Boas
Práticas”, AgilTec / IST, Junho 2003.
29. Baptista R., Relatório do projecto FRF – PPS4 – Ferramenta Protótipo para
estampagem – Actividade 4.1 – “Classificação de Peças Estampadas por Famílias
e Identificação das Prioridades de Intervenção”, IST, Janeiro 2003.
30. Baptista R., Relatório do projecto FRF – PPS4 – Ferramenta Protótipo para
estampagem – Actividade 4.3 – “Inventariação e Análise das Cadeias Existentes e
Disponíveis”, IST, Janeiro 2003.
31. L. Quintino, P. Vilaça, N. Pedrosa, Relatório da execução material e financeira do
1º ano do projecto cujo título é: “Modelling of Friction Stir Welding of
Aluminium Alloys” (acronym: iSTIR) com o Nº POCTI-CTM/41152/01 da
Fundação da Ciência e Tecnologia, Setembro de 2003.
32. L. Quintino, P. Vilaça, E. Fraga, Relatório da execução material e financeira dos
primeiros 6 meses do projecto cujo título é: “Development of an Interactive
Process Technology Database and Design Guidelines for Friction Stir Welding of
Lightweight Materials” (acronym: DIPLOMAT) com o contracto Nº G1-ST-CT2002-50279 do programa GROWTH, projecto CRAFT, Novembro de 2003.
33. Elsa Henriques, “Produção Mais Limpa - Perspectivas para as PME’s Nacionais”,
Relatório da Actividade A6 do Projecto INAUTO, AgilTec, Janeiro, 2003.
34. Elsa Henriques, “Caso de Estudo: Torneamento de Materiais Endurecidos –
HPT”, Relatório da Actividade A6 do Projecto INAUTO, AgilTec, Junho, 2003.
35. Elsa Henriques, “Caso de Estudo: Maquinagem de Ribs em Aço Endurecido”,
Relatório da Actividade A6 do Projecto INAUTO, AgilTec, Junho, 2003.
36. Elsa Henriques, “Caracterização do Desenvolvimento do Produto na Cadeia de
Valor“, Relatório da Actividade A1 do Projecto INAUTO, AgilTec, Junho, 2003.
151
37. Elsa Henriques, “Aplicação de uma Plataforma de Trabalho Colaborativo num
Ambiente de Desenvolvimento de Produto Inter-empresarial “, Relatório da
Actividade A1 do Projecto INAUTO, AgilTec, Junho, 2003.
38. Magalhães, M. R., Lira, M. M., Caldas, J. C. (2003). Avaliação da Aplicação do
Plano Regional de Ordenamento do Território do Litoral Alentejano (PROTALI).
SAAP/ISA.
39. Magalhães, M. R., Abreu, M. M., Cortez, N., Lousã, M., Espírito-Santo, D.,
Costa, J. C., Silva, P. G., Campo, S., Cuna, N., et al. (2003). Plano Verde do
Concelho de Loures. Câmar Municapal de Loures, 103 pp.
40. Pereira, H., T. Domingos, L. Vicente (eds.) (2003). Relatório das Necessidades de
Informação e Opções de Gestão dos Utilizadores. Avaliação Subglobal de
Portugal para o Millennium Ecosystem Assessment. www.ecossistemas.org/pt/
relatorios.htm
International Projects:
As Leading Partner:
1.
Project AGARD NATO Nº P126, Integrated Fluid-Structure Computational
Analysis of Aerospace Vehicles”, Coordinator: Prof. A. Suleman (IDMEC-IST),
Partners: US Air Force, USA and University of Victoria, Canadá, Oct 2001 - Sept
2004.
2.
Project AGARD-NATO P129 "Integrated Models for Material and Structure
Optimal Design for Time-Dependent Phenomena", Coordinator IDMEC/IST (H.
Rodrigues), Partners : Technical Un. of Denmark, Un. of Michigan, Un. of Delft,
Un. of Pennsylvania., Period: January de 2001-December de 2004.
3.
Project “Adaptive Space Truss Structures” , Coordinator: Prof. A. Suleman
(IDMEC-IST), Financing Institutions: Canadian Space Agency, Sensor Technology
Ltd., Period: Jan 2000- Dec 2002.
4.
Project “Adaptive Composites” , Financing: Profile Composites Inc., Canada ,
Coordinator: Prof. A. Suleman (IDMEC-IST), Period: Jan-2002 – Dec- 2004 ,
5.
ref. PE208/04, Find Persons in Atlas Areas, financed by CERN, January 2004 to
December 2004.
6.
Project “Smart Structures and Materials” , Financing: Sensor Technology Canada,
Coordinator : Prof. A. Suleman (IDMEC-IST), Period: Jan 2000 – Dec-2004.
7.
Project “Design of materials for vibration control in automotive systems”,
Coordinator: IDMEC-IST (Prof. H. Rodrigues), Financing: Toyota Motor
Corporation, Japan, Period: July 2004 – June 2006.
8.
ref. B12/02 - "Effective Modelling and Control of Flexible Robotic Manipulators
for Industrial Applications", Anglo-Portuguese Joint Research Programme,
Windsor Treaty, with Prof. M.O. Tokhi, University of Sheffield, U.K., from 1 April
2002 to June 2004.
152
9.
ref. B?/01 - “Artificial Intelligence Techniques Applied to Automatic Control”.
Anglo-Portuguese Joint Research Programme, Windsor Treaty, with Dr. Becerra,
University of Reading, U.K. From March 2001 to February 2003
10. Sampaio, R. P. C. Coordinator for the project WeSchool of the Portuguese Nautical
School (wireless lan, web services and e-learning), funded by EU and by
Operational Program of Society of Information. Beggined in September 2004.
11. “On line process quality optimization for the manufacturing of cast metalic parts”,
Growth; IDMEC, 2001-2004, 50 279 €.
12. “Integration of Rapid Prototyping Techniques in the Manufacturing Chain
Processes of the Foundry Industry”, NATO - Science For Stability, IST/IDMEC,
1996-2000,
13. Contract No. MRTN-CT-2004-505166, Research Training Network Towards
Competitive Ocean Wave Energy, Sixth Framework Programme, Marie Curie
Research Training Networks, European Commission, 2004-2008.
14. Contract No. JOR3-CT98-0282, Performance improvement of OWC power
equipment, European Commission, 1999-2002
15. MISART – Integrated Modelling of an Environmental, Rural and Tourist System,
funded
by
the
Life
Program
of
the
European
Commission
(LIFE94/P/A151/P/01307/CEN), promoted by Junitec - Junior Empresas do
Instituto Superior Técnico in partnership with Instituto Superior Técnico (total
funding of 196.859,71 ECU; 1995-1997).
16. LandSTATE – Sustainability of Tourism and Agriculture Through Total Consumer
Involvement, funded by the Life Program of the European Commission (LIFE97
ENV/P/000152) and promoted by IST in partnership with Terraprima - Sociedade
Agrícola, Lda., Câmara Municipal de Lisboa, Câmara Municipal da Covilhã, Liga
para a Protecção da Natureza, Jornal do Fundão (financiamento total de 296.370,92
ECU; 1998-2001).
17. “EXTENSITY – Environmental and Sustainability Management in Extensive
Agriculture”, funded by the Life Program of the European Commission, promoted
by IST in partnership with Auditor de Ambiente do Ministério da Agricultura,
Desenvolvimento Rural e Pescas, AESBUC – Associação para a Escola Superior
de Biotecnologia da Universidade Católica, ANCOSE - Associação Nacional de
Criadores de Ovinos da Serra da Estrela, CAP - Confederação dos Agricultores de
Portugal, DECO - Associação de Defesa do Consumidor, DECOECO – Projectos
Ambientais, Fertiprado - Sementes e Nutrientes, Lda., IDRHa – Instituto de
Desenvolvimento Rural e Hidraúlica, Liga para a Protecção da Natureza, and SGS –
Sociedade Geral de Superintendência, Portugal, S.A. (financiamento total de
709.785,00 €, 2003-2008).
18. “Three-Dimensional Laser-Doppler Velocimetry Measurements in a VW Polo
Headlight”, financiado pela Volkswagen AG, em 2002/2004.
19. Contract No.: NNE5/1999/136“ EURO-ISLAS: New and Renewable Energy
Sources for Islands and Remote
Regions, Instituto Superior Técnico, 1 March
153
de 2000/ 28 de February, Funding: Sub-Program Energie, European Commission, €
724.418,00
20. Contract No.: ENK5-CT-2002-80651, “ERA_ISLA - New and Renewable
Energies, Electricity and Water in Outermost Regions”, Instituto Superior Técnico,
1 November 2002/ 31 October 2003, Funding: Energy, Environment and
Sustainable, European Commission, Amount of funding: € 41.667,00
21. “ EIA - Estudo de Impacte Ambiental para a Nova Central Eléctrica de Palmarejo”,
Instituto Superior Técnico, 19 July 2002/20 September de 2002, Funding: Electra,
Amount of funding: 18.000,00
22. Contract No.: 4.1030/C/00-019/2000, “Heating and Fueling Landal for a
Community with 100% Renewable Energy Supply”, Instituto Superior Técnico, 1
May 2002/31 September 2002, Funding: Altener Programme, European
Commission, Amount of funding: € 73.400,00
23. “ Plano Energético de Cabo Verde - Energy Plan for Cape Verde”, Instituto
Superior Técnico, July 2002/ July 2003, Funding: APAT, Portuguese Cooperation,
Amount of funding: € 220.000,00
24. Contract No.:NNE5/2001/641, “HySociety - The European Hydrogen (based)
Society – target Action A”, Instituto Superior Técnico, 1 February 2003/31 January
2005, Funding: Energy Programme, European Commission, Amount of funding: €
223.410,00
25. Contract No.: 7.623/D/02-001, “CDM-Africa - CDM for Sustainable AfricaCapacity Building for Clean Development Mechanism in Sub-Saharan African
Countries”, Instituto Superior Técnico, June 2003 / December 2004, Funding:
Synergy Program, European Commission, € 116.682,00
As Project Partner:
1.
ref. GNSS/EGNOS – “Global Navigation Satellite System/ European Geostationary Navigation Overlay System - “EGNOS/ESTB Data Collection and
Evaluation in Portugal”, financed by EUROCONTROL, 2003-2004
2.
Project TIP3-CT-2004-506503, APROSYS: Intregated Project on Advanced
Protection Systems: SP6-Virtual Testing, Coordinator: Mecalog, Partners: Faurecia,
Regienov, CIDAUT, Fh G, IFTR, Techn. Un. of Graz, Cranfield Impact Center,
Polit. de Milano, TNO, IDMEC-IST (Prof. J.Ambrósio), Period: 2004-2008
3.
Project TIP3-CT-2004-506503, APROSYS: Integrated Project on Advanced
Protection Systems: SP6- Intelligent Safety Systems, Coordinator: SIEMENS VDO.
Partners: Faurecia, Daimler-Crysler, CIDAUT, Fh G, Warsaw University of
Technology – IAAM, TNO), IDMEC-IST (Prof. Jorge Ambrósio), Period: 20042008.
4.
Project TIP3-CT-2003-506257, APSN: Network of Excellence Advanced Passive
Safety Network, Coordinator: TNO (Netherlands), Partners: IDMEC-IST (Prof.
Jorge Ambrósio) + more than 60, Period: 2004-2009.
154
5.
Project FP6-012440, EUROPAC: European Optimised Pantograph Catenary
Interface, Coordinator: Société nationale des chemins de fer Français (SNCF),
Partners: Alstom Transport,ARTTIC, Banverket, Ceské dráhy akciová spolecnost,
Deutsche Bahn, Faiveley, Mer Mec, Politecnico di Milano, Réseau ferré de France,
Rete ferroviara italiana, Trenitalia SpA, IDMEC-IST ( Prof. J. Ambrósio) , Period:
2004-2008
6.
STRP 013517 CASSEN-Composite and Adaptive Structures: Simulation
Experimentation and Modeling (provisionally approved by EU, proposal is being
negociated).
7.
AIP3-CT-2003-502773 “Friendcopter” Coordinator: Vertair EEIG (Bélgium) ,
Partners: more than 50 plus IDMEC-IST (Prof. J. Miranda Guedes), Period: 20042007.
8.
5ºFP EU - GRD1-2001-40129 “HORTIA Heat and Oxidization Resistant Titanium
Alloys Applications"., Coordinator: Turboméca/Snecma (France) , Partners: Casa,
ECF., Exameca, Formtech, Inasmet , NLR, TNO , Turboméca , Un. HamburgoHarburg TUHH , Plansee , EADS-CASA, IDMEC-IST (Prof. H Rodrigues), Period:
2002-2006
9.
HPRN-CT-2002-00284 “New Materials, adaptive Systems and Their
Nonlinearities; Modelling Control and Numerical Simulation”, Coordinator: Prof.
Miara ( France), Period: 2003-2006.
10. EUCLID/CEPA 3/RTP 3.15/RPF 001: “Resin Transfer Moulding (RTM) for
Aerospace Structural Components”, Coordinator: EADS, Partners: more than 15
plus IDMEC-IST ( Prof. CA Mota Saores) , Period: June 1999 - May 2002
11. 5th EU FP- Growth “Active Aeroelastic Aircraft Structures (3AS)”, Coordinator:
EADS (Germany), Partners: EADS-CASA, INTA, GAMESA , ALENIA, CIRA, U.
Manchester , VZLU, DLR , SAAB, KTH , TsAGI , IDMEC-IST ( Prof. Afzal
Suleman).
12. 5th EU FP-Growth, SAFETRAM – Passive Safety of Urban Trams for Europe”,
Coordinator: Bombardier (Portugal), Partners more than 20 + IDMEC-IST ( Prof.
M. S. Pereira), Period: 2001-200
13. 6th EU FP, “EURNEX - European Rail Research Network of Excellence”,
Coordinator: FAV (Germany) , Partners: More than 20 plus IDMEC-IST, (Prof. M
S Pereira , Period: 2004-2009.
14. 6th EU FP - PLT-506652 MODTRAIN, “Innovative Modular Vehicle Concepts For
An Integrated European Railway System”, 6th Framework Programme,
Coordinator: FAV (Germany) , Partners: More than 20 plus IDMEC-IST, (Prof. M
S Pereira ), Period: 2004-2008
15. Project
BRRT-CT98-5067 “ASSET -Applications of Smart Structures in
Engineering and Techonology” , Coordinator: University of Strathclyde, Other
partners: IDMEC-IST (Prof. A Suleman) + more than 50 partners.
16. 6th EU Framework Project “ARITIMA -Aircraft reliability through intelligent
materials application”, Coordinator: Gamesa (Spain) , Partners: EADS , DLR ,
155
Eurocopter, Swedish Defense Res. Agency, Un. Sheffield, IDMEC-IST ( Prof. A.
Suleman), Period: 2005-2007.
17. ref. CERN/P/FIS/15173/99,"Calorimetry for ATLAS/LHC 2000 – FPIAA, Find
Persons in Atlas Áreas”, financed by CERN and Fundação para a Ciência e a
Tecnologia, Ministério da Ciência e do Ensino Superior, January 2002 to June
2003.
18. ref. NIVELLI - "Nichtlineare Dynamik und Verteiltes Lernen in Produktion und
Logistik", at Siemens AG, Corporate Technology, Information and Communication,
Neural Computation Department, CT IC4, from September 2001 to March 2002.
19. ref. IST-2000-29207 - EUNITE – European Network on Intelligent Technologies
for Smart Adaptive Systems, European Union FP5, from January 2001 to June
2004.
20. ref. HPRN-CT2000-00110. European Community FP5 Research Training Network
– “DAMADICS – Development and Application of Methods for Actuator
Diagnosis in Industrial Control Systems”. Coordinatorr: University of Hull (U.K.),
partners: Instituto Superior Técnico – Technical University of Lisbon, Universitat
Politècnica de Catalunya, the Technical University of Bochum, Università Degli
Studi di Genova, Universiteé des Sciences et Technologies de Lille, Warsaw
University of Technology and the Technical University of Zielona-Gora, from Jul.
2000 to Jun 2003
21. ref. AURORA – “Autonomous Unmanned Remote Monitoring Robotic Airship”,
Coordinator: Informatics Technology Institute (ITI)Brazil, financed by GRICES
Ministério da Ciência e do Ensino Superior, from 1999 to present.
22. ref. ERB FMRX-CT970137 - "Nonlinear Control Network : breakthrough in the
control of nonlinear systems", European Commission's Training and Mobility of
Researchers (TMR). Coordinator: Centre National de la Recherche Scientifique
(France), partners: Universiteit Gent (Belgium), Universidad de Murcia (Spain),
Universitat Augsburg (Germany), Università di Roma (Italy), University of
Sheffield (United Kingdom), Universiteit Twente (Holland), Universidade de
Coimbra (Portugal) and National Technical University of Athens (Greece), from
December 1997 to 1 December 2001.
23. ref. BRPR-CT96-0209 - "Film Actuators and Active Noise Control for Comfort in
Transportation Systems", European Commission’s BRITE/EURAM III.
Coordinator: VTT - Technical Research Centre of Finland (Finland), partners: TNO
(Holland), Metravib Recherce, Développement, Service, S.A. (France), Rieter
Automative Systems (Switzerland), Italiana Sistemi Inerziali ISIS S.p.A. (Italy),
Centro Ricerche Fiat S.C.p.A. (Italy), Ford Werke AG (Germany), Adtranz
Portugal - Sorefame Division (Portugal) e Alenia Aerospazio S.p.A. (Italy), 19961999
24. Maia, N. M. M., Participation on a Project under the bilateral cooperation between
Slovenia and Portugal (2004-2005).
156
25. Silva, F. A. P., Participation in the European Project UPTUN, as leader for the
Task 7.4 –Safety in Existing Tunnels-Organization of Summer and training
Courses.
26. “Machining of Very Hard Materials for Tool and Die Manufacturing”, BRITEEURAM, SHG-IPT (leader), 1999-2000, 149639 €
27. “TRANSTECH - Transport Technology Product and Process Innovation
Management, RECITE II, IPK (leader), 1998-2001, 498797 €
28. “PHIDIAS Network – Technology for manufacturing of medical models based on
rapid prototyping and medical imaging technique”, Euram thematic networks,
Materialysi (leader), 1998-2002. 209490 €
29. Contract with Ocean Energy Limited, Cork, Ireland, Preliminary Study of the
Power Take-off System for the Cork Wave Energy, 2004-2005.
30. Contract No. 502701, Co-ordination Action on Ocean Energy, Sixth Framework
Programme, Renewable Energy Technologies, European Commission, 2004-2007.
31. Contract No. JOR3-CT-0312, Islay LIMPET wave power plant, European
Commission, 1998-2002.
32. Contract No. ERKS-CT1999-20001, Establishment of a European thematic network
on wave energy, European Commission, 2000-2003.
33. Contract No. PD-161/02, Estudio de una planta de generación tipo OWC en nuevo
dique de abrigo del puerto de Mutriku (gipuzkoa), Ente Vasco de la Energia
(Spain), 2001-2002.
34. Portuguese Subglobal Assessment for the Millennium Ecosystem Assessment,
funded by Millennium Ecosystem and promoted by the Centro de Biologia Ambiental of the Faculdade de Ciências da Universidade de Lisboa (total funding of
32.500,00 USD, 2003-2005).
35. TELFONA – Testing for Laminar Flow on New Aircraft”, aprovado para
financiamento pela EC no FP6-2003-AERO-1, referência FP6-516109, em 2004.
36. “SUPERTRAC – Supersonic Transition Control”, aprovado para financiamento
pela EC no FP6-2003-AERO-1, referência FP6-516100, em 2004.
37. BIOFLAM: Application of Liquid Biofuels in New Heating Technologies for
Domestic Appliances Based on Cool Flame Vaporization and Porous Medium
Combustion; contracto No ENK6-CT-2000-00317; financiamento de 231.386 euros
pela EC; Instituição: OMV Refining & Marketing GmbH; de1/02/2001a
31/01/2005;
38. Helix Innovative Aerodynamic High Lift Concepts; Financiamento 113.502 Euros
pela EC; contracto No G4RD-CT-2001-00516; Instituição Airbus UK Limited; de
01/01/2001 a 31/05/2004
39. AWIATOR: Aircraft Wind with Advanced Technology Operation; contracto No
G4RD-CT-2002-00836; financiamento de 75. 001 Euros pela EC; Instituição
Airbus Deutschland GmbH; de 01/07/2002 a 30/06/2006
157
40. UPTUN: Sustainable and Innovative Upgrading Methods for Fire Safety in Existing
Tunnels; contracto No G1RD-CT-2002-00706; financiamento de 93.759 Euros pela
EC; Instituição Netherlands Organization for Applied Scientific Research TNO; de
01/09/2002 a 31/08/2005
41. HYSAFE- Safety of Hydrogen as an Energy Carrier; contracto No SES6-CT-2004502630;
financiamento
de103.010,00
Euros
pela
EC;
Instituição
Forschungszentrum Karlsruhe GmbH; de 01/03/2004 to 28/02/2009
42. Contract No.: ENK6-CT-2001-00546 “ECOTHERM - Evolution Control
Technology for Sustainable Thermal Processes”, Instituto Superior Técnico, 1
January 2002/31 December 2004, Funding: Research DG, European Commission, €
94.527,00
43. Contract No.: ENK5-CT-2002-20625
“POWERCLEAN - POWERCLEAN
Thematic Network for Clean Power Generation”, Instituto Superior Técnico, 1
November 2002/30 October 2005, Funding: Energy, Environment and Sustainable
Development Programme, EC
44. Contract No.: ENK5-CT-2001-00564 “NGT - New Combustion Systems for Gas
Turbines”, Instituto Superior Técnico, 1 December 2001/30 November 2004,
Funding: Energy, Environment and sustainable Development Programme, European
Commission,
45. Contract No.: 502596 (SES6), Hyways – The Development and detailed Evaluation
of a Harmonised European Energy Roadmap, IDMEC, 1 Abril 2004/31 March
2007, Funding: DG TREN, European Commission,
46. Contract No.: 4.1041/D/02-003-507.21086 “CDM MEDA - Business Opportunities
for CDM Project Development in the Mediterranean”, Instituto Sueprior Técnico, 1
May 2003/30 April 2005, Funding: Synergy Programme, European Commission
47. Contract No.: ASI/B7-301/98/679-031, UNIPASUD - EU-ASIA University
Partnership for Sustainable Development Project, 15 June 2003/14 December 2004,
Funding: Asia-Link Programme, European Commission,
48. Contract No.: NNE5/2002/73, “RenewIslands - Renewable Energy Solutions for
Islands – Target Action A”, Instituto Superior Técnico, 1 January 2003/31
December 2004, Funding: Energy, Environment and Sustainable Development –
Part B: Energy Programme, EC,
49. Contract No.: NNE5/2002/81 “OLA - Promotion of Modern, Clean energy and
Transport Technologies and Policies in Latin America & The Caribbean”, Instituto
Superior Técnico, 1 January 2004/28 February 2005, Funding: Energy,
Environment and Sustainable Development – Part B: Energy Programme, European
Commission,
50. Contract No.: NNE5/2002/75, Eminent - Early Market Introduction of New Energy
Technologies by the OPET Network in Liaison with Science and Technology,
Instituto Superior Técnico, 1 April 2003/30 September 2005, Funding: Energy,
Environment and Sustainable Development – Part B: Energy Programme, European
Commission,
158
51. Contract No.: LIFE00/TCY/CRO/000084, LIFECROCHP - Sustainable
development of Croatian capacity in CHP (combined heat and power) sector,
Instituto Superior Técnico, 1 January 2002/31 June 2004, Funding: Life-Financial
Instrument for the Environment, European Commission,
52. Contract No.: 4.1030/Z/01-035/2001, GREEN PRO - Guide for renewable energy
installations to promote biomass, photovoltaics and solar thermal in the EU,
Instituto Superior Técnico , 1 January 2002/31 December 2003, Funding: Altener
Programme, European Commission,
53. Contract No.: NNE5/2001/707, Green Hotel - Integrating Self Supply into End Use
for Sustainable Tourism –Target Action C , Instituto Superior Técnico, 1 April
2003/31 March 2006, Funding: Energy, Environment and Sustainable Development
Programme – Part B: Energy Programme, European Commission,
54. Contract No.: ENK5-CT-2002-00693, OPTICOMB - Optimisation and Design of
Biomass Combustion Systems, Instituto Superior Técnico, 1 January 2003/30 June
2006, Funding: Energy, Environment and Sustainable Development Programme,
EC
55. Contract No.: ENG2-CT-2002-20657, FCTESTNET - The Fuel Cell Testing and
standardization Network, Instituto Superior Técnico, 1 January 2003/31 December
2005, Funding: Research DG,
56. Contract No.: NNE5-2001-00402, Pulscoat System - Adaptation of a New Energyand Timesaving Hard Anodizing Process for Different Al-alloys and tests in
Selected European Industrial Applications, Instituto Superior Técnico, January
2003/31 December 2005, Funding: Energy Programme, European Commission,
57. Contract No.: ENK5-CT-2002-00662, AFTUR - Alternative Fuel for Industrial Gas
Turbines, Instituto Superior Técnico, 1 January 2002/31 June 2005, Funding:
Research DG, European Commission,
58. Contract No.: ENK6-CT-2001-00546, ECOTHERM - Evolution control technology
for sustainable thermal processes, Instituto Superior Técnico, 1 January 2002/ 31
December de 2004, Funding: Research DG, European Commission,
59. Contract No.: ENK5-CT-2001-80350, Delphi-CO2-removal - Future perspectives of
CO2 - removal at power plants in Europe, Instituto Superior Técnico, 1 January
2002/ 31 May de 2003, Funding: DG Research, European Commission.,
60. Contract No.: 4.1030/Z/01-143/2001, MunicipRegEnergAid - Study of regional and
municipal energy management in the area of energy efficiency and renewable
energy, Instituto Superior Técnico, 1 January 2002/ 31 June de 2003, Funding: DG
for Energy and Transport, European Commission,
61. Contract No.: 4.1031/Z/01-130/2001, Promotion of tri-generation technologies in
the tertiary sector in mediterranean countries (Greece, Italy, Spain and Portugal)”,
Instituto Superior Técnico, 1 January 2002/ 31 December 2003, Funding: European
Commission,
159
62. Contract No.: NNE5/2001/101-SI2.318297, Organization for the promotion of
energy technologies in Portugal" OPET-II, Instituto Superior Técnico , 1 July
2001/ 31 May de 2002, Funding: Energy Programme, European Commission,
63. Contract No.: NNE 5 1999/312, Fuel Cell Bus for Berlin, Copenhagen and Lisbon,
Phase II, Instituto Superior Técnico, 1 March 2000/ 28 February de 3, Funding:
Thermie Programme, European Commission,
64. Contract No.: NNE5/2000/208, CUTE - Clean urban transport for Europe, Instituto
Superior Técnico, 1 December 2001/ 31 November 2006, Funding: DGTREN,
European Commission,
65. Contract No.: NNE5/2000/113, Virtual Fuel Cell Power Plant - Systemdevelopment, build, field installation and European demonstration of a virtual fuel
cell power plant, consisting of residential micro-CHPs, Instituto Superior Técnico,
30 November 2001/ 31 March 2005, Funding: DGTREN, European Commission,
66. Contract No.: ECSC 7720-PR-060, MILL FIRE – The Prevention of Mill Fires and
Explosions, Instituto Superior Técnico, 1 November 1999/ 31 October 2002,
Funding: European Coal and Steel Community, European Commission, DGTREN,
67. Contract No.: NNE5-1999-00309, LVCB - Development of a Burner for Low
Volatile Coal Combustion, Instituto Superior Técnico , 1 January 2000 /31
December 2002, Funding: Energy Demonstration Programme, European
Commission, DGTREN,
68. Contract No.: ENK5-CT1999-00009, IOFLAM - Advanced Solid Fuel
Characterisation for Pulverised Combustion Systems, Instituto Superior Técnico , 1
March 2000/ 28 February 2002, Funding: Energy Programme, European
Commission, DGTREN,
69. Contract No.: ENK5-CT1999-00004, SLAGMOD-Slagging and Fouling Prediction
by Dynamic Boiler Modelling, Instituto Superior Técnico , 1 February 2000/ 31
January de 2002, Funding: Energy Programme, European Commission, DGTREN,
70. Contract No.: 7200-PR-104, PRESSURISED COAL - Experimental, numerical and
theoretical investigation on pressurised pulverised coal combustion, Instituto
Superior Técnico , 1 November 2000/ 31 October de 2002, Funding: Specific ECSC
RTD Programmme,
71. Contract No.: ENK5-CT2000-00114, “ FLOXCOM - Low NOx Flox Combustor for
High Efficiency Gas Turbines”, Instituto Superior Técnico, September
2000/November 2003, Funding: CEC/DGXVIII,
72. Contract No.: G4RD-CT-2002-00664, “21Emission Systems”, Instituto Superior
Técnico, June 2002/May 2005, Funding: CEC/RESEARCH DG,
73. Contract No.: ERB-FMRX CT98-0224, RADIARE – Fundamental Improvements
in Radiative Heat Transfer, Instituto Superior Técnico , 1 April 1998 – 30
September 2002, Funding: TMR Programme, European Union ,
160
74. Contract No.: ENK5-CT-2001-00564, NGT - New Combustion Systems for Gas
Turbines, Instituto Superior Técnico, 1 December 2001/30 November 2004,
Funding: Energy Programme, European Union,
75. MIGREYD – Modular IGCC Concepts for In-Refinery Energy and Hydrogen
Supply, 2003/2006, Funding: EC/DGTREN - Energy, Environment and Sustainable
Development – Part B: Energy Programme,
76. Contract No.: RFC-CR-03004, “Minimisation of Impact of Nitrogen Oxide
Reduction Technologies on Operation and Performance”, Instituto Superior
Técnico., September 2003/February 2007, Funding: CEC/ECSC, Research
Programme, Europen Commission,
77. Contract No.: NNE5-1999-00310, ISB2000 – Innovative Supercritical Boilers for
Near Term Global Markets, Instituto Superior Técnico, July 2000/June 2002,
Funding: Energy Programme, European Commission, DGTREN,
78. Contract No.: NNE5-2000-00183, OREMA – Integrated Efficiency and
Environmental Optimisation of Power Plants, Instituto Superior Técnico, January
2001/June 2003, Funding: Energy Programme, European Commission, DGTREN,
79. Contract No.: AL/2000/220, “Biomass residues utilisation as fossil fuel substitute
for power generation and district heating in the Mediterranean region”, Instituto
Superior Técnico, July 2001/November 2002, Funding: Energy Programme,
European Commission, DGTREN,
80. “InVehicle Energy and Emissions Information Systems”, Partners:North Carolina
State University (funded by FLAD), Date:2004 – 2005.
81. Contract No.: 011744, HY-CO – Hydrogen Coordination. Proposal for an ERA-net
in hydrogen, October 2004/September 2008, Funding: European Commission,
National Projects:
As Leading Partner:
1.
POCTI/2001/EME/38367, “Computational and Experimental Models for the
Stability Analysis of Hip Prostheses, Coordinator: IDMEC – IST, (Prof. Paulo
Fernandes), Period: 2002 – 2005.
2.
POCTI/2001/EME/37559:Computacional Models for Design Optimization ,
Damage and Identification of Smart Composite Structures and Materials,
Coordinator: IDMEC – IST, (Prof. Carlos Mota Soares), Period: March 2002 –
February 2005
3.
POCTI/2002/EME/44728, Bloch Wave Analysis Techniques Applied to the
Optimal Design of Periodic Structures”,Coordinator: IDMEC – IST, (Prof. Miguel
Matos Neves), Period: 2003-2006
4.
MRRA - Motards, Rails e Reconstituição de Acidentes, (Motards, Barriers and
Accident Reconstruction) IDMEC Project, financed by DGV (Portuguese
Directorate for Traffic), PRP (Road Prevention Institute) e Allianz (Insurance
161
Company, Coordinator: IDMEC – IST, (Prof. João Dias), Period: July 2004-Dec.
2005
5.
PARA – Peões, Atropelamentos e Reconstituição de Acidentes, (Pedestrian
Accidents: Causes and Reconstructio) IDMEC Project, financed by DGV
(Portuguese Directorate for Traffic), PRP (Road Prevention Institute) e Allianz
(InsuranceCompany,Coordinator: IDMEC – IST, (Prof. João Dias), Period: July
2004-Dec. 2005
6.
POCTI/EME/12028/1998 - Phase II “Modeling, Testing and Damage Identification
of Composite Structures with Piezoelectric Laminae”, Coordinator: IDMEC / IST,
(Prof. Carlos Mota Soares) , Period: July 2001 – June 2004
7.
FCT/POCTI/1999/EME/35983, "Computational and Experimental models for the
stability analysis of hip joint prosthesis", Coordinator: IDMEC-IST, (Prof. Paulo
Fernandes) , Period: March 2002 – February 2005.
8.
POCTI/EME/1947/95, SARA – Sistemas Automatizados de Reconhecimento
Aéreo, Coordinator: IDMEC-IST, (Prof. Heitor Pina), Others Partners: OMS/IT,
Period: June 2001- July 2003
9.
POCTI/EME/39976/2001, “Dynamic analysis methodologies for application to the
suty of the human musculo-skeletical behavior”, Coordinator: IDMEC/IST (Prof.
Jorge Ambrósio),Period: 2002-2004,
10. Project POCTI/EME/34340/99, “Advanced Optimization of Rigid-Flexible
Multibody Systems with Application to Structural Crashworthiness”,Coordinator:
IDMEC-IST, (Prof. João Dias)
11. POCTI/EME/43531/99-1999-2002, “Multicriteria Optimization of 3D structures
and materials”, Coordinator: IDMEC – IST, (Prof. Helder Rodrigues), Period:
March 2001- Aug 2004.
12. POCTI/1999/EME/33947, FCT Numerical Optimization and Experimental
Validation of Structural Fatigue life under multiaxial loading, Coordinator:
IDMEC-IST, (Prof. Trigo Santos)Period: 2000-2004
13. POCTI/FCT/P/EME/12002/1998 – Phase II, "Optimal design of orthopedic
implants".
14. Coordinator: IDMEC-IST (Prof. Paulo Fernandes).Other Partners: INEGI, Un. of
Aveiro, Period: July 2001 – June 2003.
15. Nuno Maia, POCTI/EME/2682/95 - Phase II, Dynamic Characterization of Joints
Through Sub-Structure Analysis, 2001-2003
16. Ribeiro, A. M. R., Fatigue testing on automobile exaust system components
(VENEPORTE), 2001-02
17. Ribeiro, A. M. R., IST coordinator for the project POCTI/33733/AGR/2000,
“Medição das Características Vibratórias dos Frutos”, finished in April 2004.
162
18. ref. POSI/SRI/45040/2002 “ DIVA Instrumented Airship for Aerial Surveillance”,
financed by Fundação para a Ciência e a Tecnologia, Ministério da Ciência e da
Tecnologia, from January 2004 to December 2006.
19. ref. POCTI/EME/44336/2002 - "Robust Control of Hybrid Systems", financed by
Fundação para a Ciência e a Tecnologia, Ministério da Ciência e do Ensino
Superior, from 15 July 2003 until 15 July 2005.
20. ref. IPS-3, “Supervisão e Controlo de Processos Industriais via Internet”, financed
by Instituto Politécnico de Lisboa, from October 2003 to October 2004.
21. ref. POCTI/ECM/38296/2001 - “Application of fuzzy decision making in
supervisory control strategies of complex solids-solid separation processes”,
Fundação para a Ciência e a Tecnologia, Ministério da Ciência e do Ensino
Superior, from November 2002 to November 2005
22. ref. POCTI/EME/41690/2001, “Dynamics and Control of Smart Flexible Arms”,
project financed by Fundação para a Ciência e a Tecnologia, Ministério da Ciência
e da Tecnologia, from April 2002 - April 2005.
23. ref. POCTI /EME / 39946 / 2001, Visual Servoing Applied to Rigid and Flexible
Robot Manipulators, project financed by Fundação para a Ciência e a Tecnologia,
Ministério da Ciência e da Tecnologia, from March 2002 to February 2005
24. ref. IPS-2, “Automation and remote supervision of a production line of batteries”,
financed by AUTOSIL, from July 2002 to December 2004.
25. ref. CERN//P/FIS/43707/02, “Robotization of Optical Fibre Insertion in the
TILECAL Calorimeter”. financed by Fundação para a Ciência e a Tecnologia,
Ministério da Ciência e da Tecnologia and European Centre for Nuclear Research
(CERN), under programme CERN, from January 2002 to December 2002.
26. ref. PE229/03, CP-2000, financed by Bombardier, January 2002 to October 2002,
(Fund: 4,500 euros).
27. ref. IPS-1, “Industrial Manipulator for Têxtil Industry”, financed by Instituto
Politécnico de Lisboa, from January 2002 to December 2002.
28. ref. POCTI/34058/EME/2000, “On soft computing in modeling and control”,
Tecnologia, from November 2000 to October 2002.
29. ref. PRAXIS/C/EME/12124/1998, "Acoustic noise cancelation in train coaches
using intelligent control", financed by Fundação para a Ciência e a Tecnologia,
Ministério da Ciência e da Tecnologia, March 1999 to March 2001.
30. ref. PRAXIS/3/3.1/CEG/2707/95 - “Active Control of Flexible Mechanical
Structures in Robotic Manipulators”, financed by Fundação para a Ciência e a
Tecnologia, Ministério da Ciência e do Ensino Superior, from October 1997 to
October 2000.
31. ref. 3/3.1/CEG/2707/95, "Active structural control in flexible manipulators",
Tecnologia, from October 1997 to October 2000.
163
32. “Precision Forging of Gears”, SAPIENS, IDMEC (leader), 2000-2002
33. “MICDRILL - Microfuração por Laser”, Growth, IDMEC (leader), 1999-2001
34. “Forjamento por Injecção”, PRAXIS XXI, IDMEC (leader), 1997-2000
35. “Tecnologia do Forjamento”, PEDIP, IDMEC (leader), 1999-2001
36. “Certification of 1 and 2 EURO Bimetallic Coins”, INCM, IDMEC (leader), 20002001
37. “Modelação Numérica e Análise Experimental do Processo de Estampagem de
Chapa”, PRAXIS XXI, IDMEC (leader), 1997-2001
38. “Modelização e Simulação para Optimização de Sistemas e Processos de
Fundição”, PRAXIS, IDMEC (leader), 1997-2000
39. "Desenvolvimento de Programas Computacionais para Simulação dos Processos
Tecnológicos de Produção e Ajustagem", MCT - PBIC/P/TPR/2553/95, IDMEC
(leader), 1997-2000
40. Contract No. 3/3.1/CEG/2554/95, Solving the Navier-Stokes equations for
compressible flow in Wells turbines, FCT, 1999-2002.
41. Contract No. POCTI/33960/EME/2000, Hydrodynamic interaction between wave
energy devices in arrays, FCT, 2000-2003.
42. Contract No. POCTI/EME/34146/2000, Theoretical and experimental study of a
hydraulic cross-flow turbine, FCT, 2002-2005.
43. Contract No. POCTI/EME/39717/2001, Three-dimensional inverse methods for
turbomachinery blade rows, FCT, 2002-2005.
44. Contract No. POCTI/1999/EME/34663, Phase-control of wave energy converters,
FCT, 2001-2004.
45. “Studying Environment on a Farm”, funded by the Institute for Enviromental
Promotion and promoted by IST (total funding of 900.000,00 Esc.+ VAT, 2001).
46. “General Theory of Sustainability and Application to the Agricultural Sector”,
funded by POCTI (POCTI/MGS/47731/2002) and promoted by IDMEC 20032006.
47. “Caracterização do Escoamento Bifásico em Suspensões e Aerossóis
Farmacêuticos”, financiado pela FCT, contrato POCTI/EME/46902/2002, em
2003/05.
48. “Modelação do fenómeno de incerteza no cálculo de escoamentos de fluido”;
financiamento 23000 Euros pela FCT, contrato POCTI/EME/47012, de 21/05/2003
a 20/05/2005
49. Contract No.: Protocolo Nº 105/2002 “Apoio no Desenvolvimento e Implementação
do programa Nacional sobre Alterações Climáticas: Questões dos Países em
Desenvolvimento”, Instituto Superior Técnico, 30 July 2002/ 1 August de 2003
50. Contract No.: 59/2001 “PCIP - Protocolo entre a DGA e o IST para apoio técnico
no âmbito das suas competências sobre prevenção e controlo integrados da
164
poluição”, Instituto Superior Técnico, 2 July 2001/ 1 July 2002, Funding: Direcção
Geral do Ambiente,
51. Contract No.: 19/2003, PCIP-Interface - Protocolo entre o IA e o IST para apoio
técnico e científico no âmbito das suas competências sobre prevenção e controlo
integrados da poluição (PCIP), nos termos do Decreto-Lei Nº 194/2000 de 21 de
Agosto, nomeadamente na interface PCIP com matérias relacionadas e a sua
aplicação ao contexto nacional, Instituto Superior Técnico, 1 April 2003/31 March
2004, Funding: Instituto do Ambiente
52. Contract No.: 18/2003, PCIP - Protocolo entre o IA e o IST para apoio técnico no
âmbito das suas competências sobre prevenção e controlo integrados da poluição,
Instituto Superior Técnico, 1 April 2003/31 March 2004, Instituto do Ambiente
53. Contract No.: POCTI / P / MSG/37601/2001
54. TRAFFIMPACT - Modelação do impacte ambiental do tráfego em corredores de
acesso lineares para grandes regiões urbanas, Instituto Superior Técnico, 1 October
2002/31 September 2004, Funding:Programa POCTI, Fundação para a Ciência e a
Tecnologia
55. Contract No.: POCTI / P / MSG/37601/2001, STOP & GO – Avaliação do Impacte
Ambiental resultante das paragens de veículos em portagens, estações de serviço e
semáforos, Instituto Superior Técnico, 1 June 2002/ 31 May de 2004, Funding:
Programa POCTI, Fundação para a Ciência e a Tecnologia
56. Contract No.: POCTI / P / GMS/ 35659/99, FROTLAB - A portable environmental
monitoring and forecasting laboratory for vehicles, Instituto Superior Técnico,
Funding:Programa POCTI, Fundação para a Ciência e a Tecnologia, 1 August
2000/ 31 July 2003, Amount of funding
57. Contract No.: POCTI / P / GMS/ 35649/99, ECODRIVE – Simulador de Condução
Ecológica e Ambiental, Instituto Superior Técnico , 1 August 2000/ 31 July 2003,
Funding: Programa POCTI, Fundação para a ciência e a Tecnologia,
58. Contract No.: SAPIENS – POCTI/1999/EME/36343, Modelação física, matemática
e numérica das propriedades radiativas em meios participativos, Instituto Superior
Técnico, 1 January 2001/ 31 December 2002, Funding: Fundação para a ciência e a
Tecnologia
59. Contract No.: POCTI/EME/35971/99., “Radiómetro para Aplicações Industriais”.
Instituto Superior Técnico, April 2001/March 2003, Funding: Fundação para a
Ciência e Tecnologia
60. Contract No.: POCTI/43622/EME/2000, “Estudo e Implementação de Estratégias
para a Redução Simultânea de NOx e Partículas em Fornos a Fuelóleo”, Instituto
Superior Técnico, November 2001/October 2004, Funding: Fundação para a
Ciência e Tecnologia
61. Contract No.: POCTI/EME/37410/2001, “Investigação Experimental e Numérica da
Importância da Radiação na Formação de NOx em Chamas de Difusão
Turbulentas”, Instituto Superior Técnico, February 2002/January 2005, Funding:
Fundação para a Ciência e Tecnologia (P),
165
62. Contract No.: POCTI/EME/37529/2001, “Development of a Model for NOx
Reduction Under Reburning Conditions Using Natural Gas and Biogas as
Secondary Fuel”, Instituto Superior Técnico, April 2002/March 2005, Funding:
Fundação para a Ciência e Tecnologia,
63. Contract No.: POCTI/EME/41349/2001,
“Diagnostic System for Thermal
Application”, Instituto Superior Técnico, August 2002/July 2004, Funding:
Fundação para a Ciência e Tecnologia,
64. Contract No.: POCTI/1999/EME/35967, “Avaliação do Desempenho da Ventilação
Natural de um Edifício de Habitação Multifamiliar”, Instituto Superior Técnico, 15
October 2001/14 October 2004, Funding: Programa POCTI, Fundação para a
Ciência e Tecnologia ,
65. Contract No.: POCTI/EME/44107/2002, A hybrid finite volume / finite element
method for the solution of the radiative transfer equation, Instituto Superior
Técnico, 1 September 2003/31 August 2006, Funding: Fundação para a Ciência e
Tecnologia
66. Contract No.: POCTI/EME/44225/2002, AdapChem: Improvement and application
of the concept of adaptive chemistry to CFD calculations of laminar flames, 200305, Funding: SAPIENS
67. Contract No.: IST, "Estudo de regaseificador de convecção natural atmosférica para
gás natural liquefeito”February 2002 / October 2004, Funding: Transgás
68. Prevenção e Controlo Integrados da Poluição (PCIP), Partners:Instituto do
Ambiente, 2004 – 2005.
69. “Monitorização energética e ambiental de automóveis ligeiros de passageiros” ,
Partner: Galpenergia , 2004 – 2005.
70. “Impacte energético e ambiental de um posto de abastecimento de combustível”,
Partners:TOTAL, Portugal Petróleos S.A., 2004 – 2005.
71. “Viabilidade de Implementação de uma Estação de Abastecimento Multifuel em
Portugal”, Partner:Galpenergia , 2004 – 2005.
72. “Análise e quantificação do impacte energético e ambiental das tecnologias de
Autocarros de Transportes Urbanos de Passageiros”, Partners:STCP, APVGN,
(funded by DGTT), 2004 – 2005.
As Project Partner:
1.
POCTI/35939/99, ROTDYN, Coordinator: Inst. Proponente ITN, Period: June 2001
– Dec 2004
2.
POCTI/2700/95 “LAGOS SOLARS: Dinâmica de Sistemas com dupla difusão”,
Coordinator: INETI , Partner: IDMEC – IST, (Prof. Heitor Pina), Period: June
2001-July 2003
166
3.
POCTI/EME/33710/99, “Development of non-lubricated roller-chain drives with
optimal surface treatment”, Coordinator: Prof. Ramalho Un. Coimbra , Partner:
IDMEC-IST ( Prof. Jorge Ambrósio)., Period: 2002-2004
4.
Júlio Montalvão, UME/CP 2000, Bombardier Transportation, 2002-03
5.
ref. POSI/SRI/41201/2001, “Recognition of Antique Typographic Font”, financed
by Fundação para a Ciência e a Tecnologia, Ministério da Ciência e do Ensino
Superior, from September 2002 to September 2004.
6.
ref. POSI /SRI / 41201 / 2001, REFINA – Recognition of Antique Typographic
Fonts, financed by Fundação para a Ciência e a Tecnologia, Ministério da Ciência e
da Tecnologia, from 2002 to August 2004.
7.
ref. PRAXIS/2/2.1/TPAR/2057/95 phase 2, “CVAM – Automatic Visual
Classification of Polished Marbles Surfaces”, financed by Fundação para a Ciência
e a Tecnologia, Ministério da Ciência e da Tecnologia, coordinator: Instituto
Nacional de Engenharia e Tecnologia Industrial INETI, from August 2001 to
December 2003.
8.
ref. PRAXIS /P/EEI/12201/1998 phase 2, “AUTOCARTIS - Automatic Methods
for Updating Cartographic Maps Using Satellite Images”, financed by Fundação
para a Ciência e a Tecnologia, Ministério da Ciência e da Tecnologia, coordinator:
CVRM - Instituto Superior Técnico, from July 2001 to June 2003.
9.
ref. PRAXIS /C/EEI/12122/1998, phase 2, “ROMA- Antic Music Optical
Recognition”, financed by Fundação para a Ciência e a Tecnologia, Ministério da
Ciência e da Tecnologia, from July 2001 to December 2002.
10. ref. POSI/SRI/34244/99 – “DISCO - Distributed Embeddable Systems for Control
Applications, coordinator: Aveiro University, financed by Fundação para a Ciência
e a Tecnologia, Ministério da Ciência e do Ensino Superior, from July 2000 to June
2003.
11. ref. POCTI/EME/34768/2000 - " Dynamics and Control of Flame Stabilisation and
Propagation for Advanced Energy Systems ", financed by Fundação para a Ciência
e a Tecnologia, Ministério da Ciência e da Tecnologia, from October 2000 to
October 2003.
12. ref. PRAXIS/3/3.1/CTAE/1947/95, “SARA – Automatic Aerial Recognition”,
Tecnologia, from 1996 to 2004.
13. “HISIM - High Speed Intelligent Milling Cell for Mould and Die Making”, PEDIP
II, AGILTEC (leader), 1998-2000
14. “PROSSEIA – Advanced Manufacturing of Signal and Energy Distribution
Systems for the Automotive Industry”, PEDIP II, DELPHI (leader), 1998-2000
15. “TAVAC – Advanced Machining and Finishing Technologies for Moulds & Dies”,
PEDIP II, Anibal H. Abrantes (leader), 1997-2000
16. “RNPR – Portuguese Rapid Prototyping Network”, PEDIP II, Iberomoldes (leader),
1997-2000
167
17. “TECNAC – Development of Electro-Discharge Polishing Technology for Moulds
and Dies”, PRAXIS XXI, ITEC (leader, 1997-2000
18. “COMPOSIN – Abrasion Wear of Si3N4 matrix based composites with carbides
nano-inclusions: ultrasonic machinability studies” PRAXIS XX, Universidade de
Aveiro (leader), 1997-2000
19. “Aplicação de processos de fabrico de formas quase definitivas na indústria
automóvel”. PEDIP II, INETI (leader), 1999-2000
20. “TECNACAM - Integração de Tecnologias de Corte e Soldadura Laser e da
Enformação Plástica para o Fabrico de Componentes Multimaterial /
Multiespessura”, PEDIP II, INETI (leader), 1999-2000
21. “TECNACAM - Desenvolvimento e Implementação de uma Metodologia de
Prototipagem Virtual para Estampagem de Chapa Metálica e Tecnologia Avançada
de Estampagem de Chapas Metálicas”, PEDIP II, INETI (leader), 1999-2000
22. “Estudos do Estado da Arte - Mutação Tecnológica nos Métodos de Produção de
Componentes em Chapa Metálica”, PEDIP II, INETI (leader), 1999
23. “Modelação Numérica e Análise Experimental do Processo de Estampagem de
Chapa”, PRAXIS XXI, IST (leader), 1997-2001
24. “INTELIMAQ - Maquinagem inteligente e integrada por computador”, PEDIP II,
INETI (leader), 1999-2000
25. “Engineering and Technology 2000” Ministério da Economia (Sponsor), Academia
de Engenharia, Ordem dos Engenheiros, AIP (leaders), 1999-2000
26. “SERENA: Serviços de Engenharia Avançada no Sector Automóvel – MAOPF:
Métodos Avançados de Optimização de Processos de Fabrico”, PEDIP, INETI
(leader), 1997-2000
27. Contract WEC Douro (CEO Douro), IDEA Programme, ADI, Portugal, 2004-2005.
28. Contract DEMTEC 016/1/03 OWC Demonstration (Demonstração CAO Douro),
DEMTEC Programme, ADI, Portugal, 2004-2005.
29. Contract No. PL228/02, Estudo de caracterização do comportamento dinâmico do
sistema de abastecimento de gás natural à Termoeléctrica do Ribatejo, IDOM
Engenharia Lda (Portugal), 2002-2003.
30. Protolactis – Development of a Prototype for the Traditional Manufacturing of
Cheese, funded by the Programa for the Support of the Modernisation of
Agriculture and Forestry (Nº 411071580370) and promoted by Escola Superior de
Biotecnologia da Universidade Católica Portuguesa in partnership with IST and
Ovibeira.
31. “ECOSEGURANÇA – Promotion of Eco-Efficiency and Safety in Traditional and
Innovative Production Systems at the Farm Scale”, funded by Programa Agro,
Medida 8 – Desenvolvimento Tecnológico e Demonstração, Acção 8.1 –
Desenvolvimento Experimental e Demonstração, promoted by Escola Superior de
Biotecnologia da Universidade Católica Portuguesa, in partnership with ANCOSE -
168
Associação Nacional de Criadores de Ovinos da Serra da Estrela, Terraprima –
Sociedade Agrícola, Lda., Estação Zootécnica Nacional and IST.
32. “Assessment of the Stability and Effective Administration of Pharmaceutical
Suspensions and Aerosols by Laser Diffractometry”, financiado pela FCT, contrato
POCTI/FCB/41628/2001, em 2002/04.
33. Contract No.: PCTI/1999/EME/34266,“COMBISTRESS -Development of a
Methodology to Analyse the Combined Effect of Discomfort Stressors in Riding
Passengers”ESTG Leiria, 01/01/2001 to 31/12/2003, Funding: Financiado pela
Fundação para a Ciência e Tecnologia
34. “Monitorização de Acústica do Ambiente no âmbito do Programa Polis Leiria”
35. ESTG Leiria, 01/2002 to 31/07/2005, Funding: Financiado pela Sociedade Leiria
Polis (Parque Expo / Câmara Municipal de Leiria)
36. “Network of Laboratories of functional materials for reactions, membrane processes
and fuel cells”, Funding: FCT: PROGRAMA NACIONAL DE
REEQUIPAMENTO CIENTÍFICO
37. “Gestão Integrada de Sistema de Frotas: Optimização Energética e Ambiental no
Transporte Rodoviário de Passageiros”, Partners:
Rodoviária de Lisboa, SA
(funded by DGTT), 2004 – 2005.
38. Contract No.: POCTI/47900/EME/2002."Analysis of particle deposition in boilers",
Venue: Instituto Superior Técnico, November 2003/October 2006, Funding:
Fundação para a Ciência e Tecnologia (P)
39. Contract No.: IST_1105, Characterization of unit Sines4 before and after the
installation of complementary measures for NOx reduction, July 2004 / March
2005, Funding: Companhia Portuguesa de Produção de Electricidade (P),
Patents and Prototypes
1.
Two Degrees of Freedom Planar manipulator (rigid-flexible). (Local: IDMEC).
2.
Six Degrees of Freedom anthropomorphic manipulator (rigid-flexible). (Local:
IDMEC)
3.
Robot for Automatic Insertion of Optical Fibres. (Local: LIP-Coimbra).
4.
CD ROM – Casos Didácticos de Aplicação de Tecnologia de Soldadura
5.
Weldicion- dictionary of the welding technology (7 languages)
6.
I-FORM : Finite Element Computer Program for the Numerical Simulation of Bulk
Metal Forming Processes. ASSOFT - Associação Portuguesa de Software, Refª
435/D/99
7.
Universal tool for the production of axisymmetrical parts by hydroforming.
8.
Several prototypes manufactured by Rapid Prototyping Technology by distinct
techniques and materials to produce foundry tools during the project “NATO –
Science for Stability - PO-PROTOTYPING – Integration of Rapid Prototyping
169
Techniques in the Manufacturing Chain Process of the Foundry Industry”, 19961998.
9.
Participation in the post graduation course “International Welding Engineering”,
2000
10. Universal tool for the production of axisymmetrical parts by hydroforming, 2000.
11. European wave energy pilot plant on the island of Pico, Azores, Portugal. It is a
prototype plant of oscillating-water-column type. The first full-sized wave power
plant designed and built to be permanently connected to an electrical grid (Pico
island grid). The basic studies, development, design, construction and monitoring
were carried out within the framework of four JOULE contracts (1992-2002), coordinated by IST. The plant consists basically of: one bottom-standing concrete airchamber, inside horizontal dimensions 12mx12m; one air turbine of Wells type,
rated power 500 kW; several air-flow valves; one variable-speed electrical
generator; power electronics equipment; conventional electrical equipment; control
equipment; monitoring equipment. The plant is owned jointly by Electricidade dos
Açores SA and by Electricidade de Portugal SA, and became operational in October
1999. In 2000-01 some modifications were introduced into the plant, namely in the
layout of the electrical equipment and in the guide-vane system of the turbine. A
new set of turbine rotor blades was designed and manufactured in 1999-2001.
12. Variable Pitch Turbine and High Speed Valve to be installed in the Azores wave
power plant. These prototypes have been developed and constructed within the
framework of a JOULE contract (1996-99) co-ordinated by the University of
Edinburgh, having IST as the other major partner. Both units are the first prototypes
of their kind. The turbine (rated 500 kW), generator and air valve are to be installed
in the Azores plant, in parallel with the existing Wells turbo-generator set (see
above). The air valve will enable the plant to be phase-controlled. These prototypes
were tested at IST in 2000-01.
13. Unmanned aircraft for aerial reconnaissance. A 1:2-scale model was designed, built
and tested, as a joint project involving Instituto Superior Técnico and OGMAPortuguese Aeronautical Industry. The model is being used to test, in flight,
monitoring equipment and instrumentation, including data and image acquisition
system, and image transmission. The design of the full-scale prototype is being
finalized, after extensive testing of the model
14. The aerodynamic design of the ARMOR X7 UAV has been concluded and frozen;
the engineering design of the prototype is being handed to OGMA for construction.
Work then focussed on Micro Air Vehicle configurations starting with a
fundamental assessment of aerodynamic interference effects among neighbouring
lifting components both in analytical and in numerical terms.
15. Active Aeroelastic Aircraft Demonstrator, Collaboration: Idmec-Academia Da
Força Aérea, Sintra
16. This research program has resulted in the design, analysis, fabrication, and testing
of a RPV utilizing piezoelectric actuators and sensors as well as ailerons to control
its aeroelastic response. The results of these tests indicate that a RPV wing utilizing
170
skins as the structural element with piezos located only on one face of each of the
skins can be effectively controlled. Moreover, the control authority and subsequent
dynamic aeroelastic amplitude reduction in the wing is greater than that attainable
using conventional aerodynamic control surfaces. Passive shunting has allowed
fine-tuning and it has provided a good solution to improve the RPV flight safety, in
case of adaptive control system malfunction, if the mission situation assessment is
capable of clearly identify the RPV flight envelope worst-case scenarios.
17. Adaptive Undersea Vehicle Collaboration: Idmec-University Of Victoria, Canadá:
Current autonomous underwater vehicles (AUVs) are almost exclusively propeller
driven designs, which must inherently be optimized for a particular speed and
which must sacrifice low speed manoeuvrability for cruising efficiency. Recently,
biomimetic approaches to underwater vehicle propulsion have illuminated the
exciting possibilities for performance improvements made possible by emulating
fish motion. In particular, a number of test vehicles indicate that the carangiform
swimming mode employed by highly developed species of fish such as the Bluefin
tuna offers both a more efficient propulsion mechanism than propellers, in addition
to the ability to perform quick manoeuvring. The research is focusing on application
of adaptive structure technology to the challenging problem of emulating fish
propulsion. The underwater vehicle design presented in this report will provide a
preliminary test vehicle that will enable validation of the adaptive structure
approach to this area, and highlight some of the issues that will be addressed in
future work to optimize both the design and swimming parameters.
18. Testing Machine for the study of the Dynamic Behaviour of Apples.
19. Wave Energy Power Plant on the Island of Pico, Azores; Rated power: 400 kW.;
Type: shoreline oscillationg-water-column; Main equipment: one fixed-pitch Wells
turbine (2.3 rotor-diameter); variable-speed generator and power electronics; two
air valves; control equipment; Location: island of Pico, Azores; Owners: Empresa
de Electricidade dos Açores SA, Electricidade de Portugal SA.
20. LIMPET Wave Power Plant on the Island of Islay, Scotland; Rated power: 500 kW;
Type: shoreline oscillating-water-column; Main equipment: two counter-rotating
fixed-pitch Wells turbine (2.6m diameter); two variable-speed generators and power
electronics; two air valves; control equipment; Location: island of Islay, Scotland;
Owner: Wavegen Ltd, Inverness, Scotland.
21. Variable-pitch Wells turbine; Rated power: 400 kW; Type: variable-pitch Wells
turbine (1.7 m diameter), driving a variable-speed electrical generator (designed and
constructed to equip the Pico OWC plant); including power electronics and control
equipment; Location: Instituto Superior Técnico; Owners: University of Edinburgh,
Instituto Superior Técnico.
22. ARMOR X7 UAV; A half-scale model of the ARMOR X7 UAV (3 m span) is
being used for in-flight tests of systems and components; The full-scale prototype
(6 m span, 200 kg TOW) is due to start flight tests early 2004; Location: Instituto
Superior Técnico; Owners: Instituto Superior Técnico
23. Ecodrive- simulador de condução ecológica e segura
171
Protocols:
Entity:
Date:
Instituto do Ambiente
May 2004
Entity:
Date:
Federação Portuguesa de Transportadores Rodoviários
May 2004
Entity:
Date:
TOTAL, Petróleos de Portugal, SA
March 2004
Entity:
Date:
North Carolina State University
March 2004
Entity:
Date:
Câmara Municipal de Évora
January 2004
Entity:
SITEE-EM - Sistema Integrado de Transportes e Estacionamento de Évora
– Empresa Municipal
January 2004
Data:
Other Activities of Relevance:
Organization of Scientific Conferences
1.
Iberia Conference on Computational Mechanics, Lisbon, 2004 – Prof. Carlos Mota
Soares and Prof. Helder Rodrigues
2.
Cristovão Mota Soares, Vice-Chairmen- ICCE/11- Eleventh annual international
conference on composites/nano engineering, Hilton Head Island, South Carolina,
USA, August 8-14, 2004
3.
ECCOMAS Thematic Conference on Smart Structures, Lisboa, 2005 – Prof. Carlos
Mota Soares
4.
ICCB2005 International Conference on Computational Bioengineering, Lisboa,
IST, 2005- H Rodrigues, JAC Ambrósio
5.
ECCOMAS Conference in Computational Mechanics, Lisbon, 2006 – Prof. Carlos
Mota Soares,Prof. Helder Rodrigues, Prof. Cristóvão Mota Soares and Prof. Jorge
AmbrósioMaia, N. M. M., Member of the local organizing committee of the
international conference “Twelfth International Congress on Sound and Vibration”,
11-14 July 2005, Lisbon, Portugal.
172
7.
José Sá da Costa, Co-organization of MECHROB'04-IEEE International
Conference in Mechatronics & Robotics 2004, Aachen, Germany, September 2004.
8.
Luisa Quintino, Membro do Comité de Organização da Conferência Internacional
“Eurojoin 5”, Áustria, a realizar em Maio de 2004.
9.
Luisa Quintino, Membro do Comité de Organização da Conferência Internacional
“Welding Quality Competitiveness”, Israel, a realizar em Outubro de 2005.
10. Barreiros, A., Heat and Mass Transfer in Turbulent Flames, Mini-symposium of the
Engineering (ECCOMAS 2004), Jyväskylä, Finland, 24-28 July 2004
11. RENEWABLES 2004 - International Conference on New and Renewable
Technologies for Sustainable Development, Évora, Portugal, 28 June/1 July 2004
12. International Research Council on Biomechanics of Impact Annual Conference
2003, Lisbon, Portugal, 2003 – Prof. Jorge Ambrósio
13. AAAM2003 American Association for Automotive Medicine Conference 2003,
Lisbon, Portugal, 2003 – Prof. Jorge Ambrósio
14. ECCOMAS Thematic Conference on Smart Structures, Warsaw, 2003 – Prof.
Carlos Mota Soares
15. Congress of Applied and Computational Mechanics, Évora, 2003 – Prof. Joaquim
Infante Barbosa and Prof. Carlos Mota Soares
16. International Conference on Composite Engineering, New Orleans, 2003, - CoChairman Prof. CristóvãoMota Soares
17. ICCB2003 International Conference on
Zaragoza,Un. Zaragoza, 2003- H Rodrigues
Computational
Bioengineering,
18. Silva, J. M. M. – Appointed as Member of the Organising Committe and Scientific
Committee of the “3º Congresso Luso-Moçambicano de Engenharia” to be held in
Maputo, Mozambique, in August 2003.
19. Luis Maltez, XX IASP – World Conference on Science and Technology Parks
under the theme: Habitats of Excellence – Managing and Promoting Innovation,
International Association of Science Parks, Estoril, Junho 2003. Member of the
Organising Committee and the Steering Committee.
20. CLEAN AIR - Seventh International Conference on Energy for a Clean
Environment, Lisbon, Portugal, 7/10 July 2003, 279 participants, 40 countries
21. 2nd Dubrovnik Conference on Sustainable Development of Energy, Water and
Environment Systems, Dubrovnik, Croatia , 15/20 June 2003
22.
“Symposium on Numerical Simulation in Biomechanics” a special session of the
conference “V Congresso de Metodos Numéricos en Ingenieria”, co-organized by
Prof. Helder Rodrigues, Madrid, 2002.
23. Jorge Ambrósio, Organizer of the Multibody Dynamics session in V Congresso de
Metodos Numéricos en Ingeneria, Madrid, Spain, June 3-6 2002.
173
24. Jorge Ambrósio, Member of the organizing committee, NATO-ASI em Virtual
Nonlinear Multibody Systems, Prague, Czech Republic, June 23- July 7 2002.
25. Conferência Científica e Tecnológica em Engenharia, CCTE, 6 a 10 de Maio, 2002,
ISEL, Lisboa, membro de Comissão Científica e Técnica.
26. Co-chairmen in the ICCE/9 – Ninth International Conference on Composites
Engineering (July-1-6, 2002, San Diego CA, USA): Prof. Cristóvão M. Mota
Soares.
27. Prof. Carlos Mota Soares was in the organizing committee of the IV World
Congress of Computational Mechanics, Vienna 2002.
28. Prof. Carlos Mota Soares was Co-Chairman of the Spanish/Portuguese Congress of
Computational Mechanics, Madrid, 2002.
29. Prof. Cristóvão Mota Soares was the Chairman of Spanish/Portuguese on
Composite Engineering, Madrid, 20
30. Maia, N. M. M., Silva, J. M. M., Ribeiro, A. M. R., Organisation of the
International Conference on Structural Dynamics Modelling, Funchal, Madeira,
Portugal, June 2002
31. Luisa Quintino, International Conference “Welding Quality Competitiveness”,
Israel, October 2002.
32. Luisa Quintino, International Conference “Autojoin”, Instituto de Soldadura e
Qualidade, Lisbon, 2002.
33. International Conference RPD 2002 – Rapid Product Development”, Portugal,
Outubro 2002
34. Água, Energia e Ambiente em Regiões Insulares.Mindelo, S.Vicente and Praia,
Santiago – Cape Verde, 8/10 July 2002
35. XIV Congresso da Ordem dos Engenheiros.Coimbra, Portugal,27/29 June 2002,
490 participants
36. International Conference on New and Renewable Technologies for Sustainable
Development. Ponta Delgada, Azores, Portugal, 24/26 June 2002, 100
participants, 17 countries
37. Cumprindo os Objectivos do Protocolo de Quioto e Promovendo a Transferência de
Tecnologia para Países Insulares em Desenvolvimento – Projecto CDMSIDS.Sal,
Cape Verde, 1 March 2002
38. “Energias Alternativas em Transportes Rodoviários”, Lisboa, 29 de January de
2002
39. “Motores Diesel: presente e Futuro”, Lisboa, 20, 21 de February de 2002 e 17 e 18
de April de 2002
40. 2as Jornadas Politécnicas de Engenharia Mecânica, Automóvel, Gestão Industrial e
Ambiente, Filipe Didelet, João Ramos, João Mendes (editores), EST Setúbal, ESTG
Leiria, Setúbal: 13 e 14 de November de 2002
174
41. First Dubrovnik Conference on Sustainability Development of Energy, Water and
Environment Systems, Dubrovnik, June 3-7, 2002
42. 11th International Symposium on Applications of Laser Techniques to Fluid
Mechanics, Lisbon, July, 2002. Number of participants = 300 from 25 countries.
43. International Conference on Sustainable Development of Energy, Water and
Environment Systems, Dubrovnik, June, 2002. Number of participants = 200.
44. CST/5 – The 5th International Conference on Computational Structures Technology,
6-8 September. Leuven, Belgium, 6-8 September 2000, # of part: 250, Carlos A.
Mota Soares, (Scientific Committee).
45. ICECT/2 - The 2nd International Conference on Engineering Computational
Technology, Leuven, Belgium, September 6-8, 2000, # of part: 250, Cristóvão Mota
Soares (Scientific Committee)
46. WCSMO-4 The Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, June 4-8, 2001, # of part: 200, Carlos A. Mota Soares
(Organizing Committee, Scientific Committee), Cristóvão Mota Soares (Scientific
Committee), Helder Rodrigues (Scientific Committee)
47. VI Congresso Nacional de Mecânica Aplicada e Computacional, APMTAC, April
2000, Aveiro, Portugal, # of part: 30, Carlos A. Mota Soares (Organizing
Committee)
48. Symposium on “Simulação em Bioengenharia” in IV Congresso de Métodos
Numéricos em Engenharia, SEMNI, Jun 1999, Sevilha , Spain, # of part: 30, Helder
Rodrigues (Co-Organizer)
49. "Fourth International Symposium on Computer Methods in Biomechanics and
Biomedical Engineering”, Lisbon, October 1999, # of part: 100, Helder Rodrigues
(Scientific Committee)
50. Symposium on “Biomecânica”, in VI Congresso Nacional de Mecânica Aplicada e
Computacional, APMTAC, April 2000, Aveiro, Portugal, # of part: 50, Helder
Rodrigues, (Organizer)
51. Symposium on “Simulação em Bioengenharia” , in V Congresso de Métodos
Numéricos em Engenharia , SEMNI-APMTAC, Junho 2002, Madrid, Spain,# of
part: 50, Helder Rodrigues (Co-Organizer).
52. “Advanced School and Workshop CIM: Bone Mechanics - Mathematical and
Mechanical Models for Analysis and Synthesis”. Lisbon, 24 –28, Jun 2002, CIM- ,
# of part: 50, Helder Rodrigues (Organizer), José Miranda Guedes (Co-organizer)
53. 2nd European Conference on Computational Mechanics, Cracow, Poland, 26 - 29
June 2001, # of part:100, Carlos A. Mota Soares (Organizing Committee, Scientific
Committee)
54. Minisymposium on Multibody Dynamics and Robotics in 2nd European Conference
on Computational Mechanics, Cracow, Poland, 26 - 29 June 2001, # of part: 30,
Jorge Ambrósio (Co-director)
175
55. EUROMECH COLLOQUIUM 404: Avances in Computational Multibody
Dynamics, Lisbon Portugal, 20 -23 September 1999, # of part: 90, Jorge Ambrósio
(Chairman, Scientific Committee)
56. NATO-ARW in Computational Aspects of Nonlinear Structural Systems With
Large Rigid Body Motion, Pultusk, Poland, 2 - 7 July 2000, # of part: 50, Jorge
Ambrósio (Chairman, Organizing Committee)
57. CISM Advanced School in Crashworthiness: Energy Management and Occupant
Protection, Udine, Italy, 11 - 15 September 2000, # of part: 42, Jorge Ambrósio
(Coordinator)
58. Minisymposium on Multibody Dynamics no 11th US National Congress on
Computational Mechanics, Dearborne, USA, 1 - 3 August 2001, # of part: 50, Jorge
Ambrósio (Co-director)
59. European Congress on Computational Methods in Applied Science and
Engineering, Barcelona, Spain, 2000, # of part: 1000, Carlos A. Mota Soares
(Organizing Committee, Scientific Committee)
60. 1st European Conference on Computational, Munich, Germany, 1999, # of part:
600, Carlos A. Mota Soares (Organizing Committee, Scientific Committee)
61. NATO Advanced Research Workshop on Topology Optimization, Budapest,
Hungary, 2000, # of part: 80, Carlos A. Mota Soares (Organizing Committee,
Scientific Committee)
62. ICCE/8 – Eight International Conference on Composite Structures, Tenerife,
Canary Islands, August 5-11, 2001, # of part: 400, Cristóvão Mota Soares (Cochairmen)
63. ICCE/7 – Seventh International Conference on Composite Structures, Denver,
Colorado, July 2 – 8, 2000, # of part: 500, Cristóvão Mota Soares (Co-chairmen)
64. ICCE/6 – Sixth International Conference on Composite Structures, Orlando,
Florida, June 27 – July 3, 1999, # of part: 400, Cristóvão Mota Soares (Cochairmen)
65. 1st Meeting on Iterative and Symbolic Computation, Lisbon, January 2001, # of
part: 20, Heitor Pina (Co-organizer)
66. Computational & Exper. Aeroelasticity - Set 27-30, 1999, IST/AFA, # of part: 50,
Afzal Suleman (Coordinator)
67. Smart Structures:Theory and Applications- Jun 19-23, 2000, Udine, Italy, # of part:
45, Afzal Suleman (Coordinator)
68. Small Satellites Technology- October 23-27, 2000, Lisbon, Portugal, # of part: 100,
Afzal Suleman (Coordinator)
69. Fluid-Structure Interaction: from Fluttering Wings to Flapping Flight- October 1577, 2001, Lisbon, Portugal, # of part: 60, Afzal Suleman (Coordinator)
176
70. Maia, N. M. M. - Member of the "Organizing Committee" of the International
Conference in Recent Advances in Modal Analysis Practice, Gold Coast,
Queensland, Australia, 15-17 December 1999.
71. Maia, N. M. M. and Silva, J. M. M. – Coorganizers of an International Conference
on “Structural Dynamic Analysis” to take place at Funchal, Madeira from 3 to 5
June 2002.
72. ECC’01 – European Control Conference, Porto, Portugal, Sept. 2001. J. Sá da
Costa, IPC Chair. Participants 1200.
73. ECC’01 – Student Forum, Porto, Portugal, Sept. 2001. J. Sá da Costa (chair), M.
Ayala Botto (organizer), J. Sousa (organizer). Participants 1200.
74. Invited session on “Visual Servoing” in the European Conference Control
ECC’2001. J. Caldas Pinto (session organizer). Participants (34).
75. DAMADICS' Vacation School in Neuro-fuzzy methods for modelling & fault
diagnosis, Lisbon, Portugal, August 31 to September 1, 2001. J. Sá da Costa (chair
and organizer). Participants (45).
76. 5th IberoAmerican Symposium on Pattern SIARP 2000. , Lisbon, Portugal,
September 11-13, 2000. J. Caldas Pinto (co-chair). Participants (100)
77. J. Ferreira, Scientific conference “Integration of Information Technologies and of
the Rapid Prototyping Techniques in the Manufacturing Chain Process of the
Foundry Industry”, sponsored by “NATO – Science for Stability” and “Associação
Portuguesa de Fundição”, Porto, March 1999.
78. J. Ferreira, Scientific conference “EURO RP 2001” - 9èmes Assises Européennes
du Prototypage Rapide – 10th European Conference on Rapid Prototyping and
Manufacturing, as Chairman of “Technical Session’s Chairmen’s Board” (session:
Outillage 2/Tooling 2), Paris – France, June 2001.
79. L. Quintino, Member of the organising committee of the Annual Assembly of IIW,
Lisbon, Portugal, 1999.
florença, Italy, 2000.
Lubliam, Eslovénia, 2001.
82. Bristol International UAV Systems Conference, held annually in Bristol, UK,
attendance about 150, Vasco Brederode (member of Organizing Committee)
83. Sixth International Conference on Technologies and Combustion for a Clean
Environment.Oporto, Portugal, 9/12 July 2001, 266 participants, 37 countries
84. XIII Congresso 2000 Engenharia e Cultura (Portuguese Society of Engineers),
Oporto, Portugal, 21/23 September 2000
85. Euro Conference New and Renewable Technologies for Sustainable Development,
Madeira Island, Portugal, 26/29 June 2000, 75 participants, 24 countries
177
86. Working Party on Climate Change - Informal Workshop of the Portuguese
Presidency, Sintra, Portugal, 7/8 February 2000, Position: Local organizer
87. Fifth International Conference on Technologies and Combustion for a Clean
Environment, Lisbon, Portugal, 12/15 July 1999, 324 participants, 28 countries
Scientific Committees of Conferences
1.
Silva, J. M. M. – Appointed as Member of the Scientific Committee of the “3º
Congresso Luso-Moçambicano de Engenharia” to be held in Maputo, Mozambique,
in August 2003.
2.
Silva, J. M. M. – Appointed as Member of the Scientific Committee of the “3º
Congresso Luso-Moçambicano de Engenharia” to be held in Maputo, Mozambique,
in August 2003.
3.
Jorge Ambrósio, Member of the scientific committee, ICRASH2002 International
Crashworthiness Conference, Melbourne, Australia, February 24-28 2002.
4.
Jorge Ambrósio, Member of the scientific committee, MuSMe2002: International
Symposium on Multibody Systems and Mechatronics, Mexico City, Mexico,
September 12-15 2002.
5.
Maia, N. M. M. – Member of the Scientific Committee of the First European
Workshop on Structural Health Monitoring 2002, July 10-12, 2002, E.N.S. Cachan
(Paris), France.
6.
Maia, N. M. M. – Member of the Scientific Committee of ISMA 2002, International
Conference on Noise and Vibration Engineering, September 2002,
KatholiekeUniversiteit Leuven, Belgium.
7.
Silva, F. A. P. - Member of the Scientific Committee of the “8ªs Jornadas
Portuguesas de Tribologia”, University of Aveiro, June 2002.
8.
ROBOTICA 2002: International Program Committee Member : José Sá da Costa.
9.
MED 2002- MEDITTERANEAN CONTROL AND AUTOMATION
CONFERENCE: International Program Committee Member: José Sá da Costa.
10. IASTED Modelling and Simulation 2002: International Program Committee
Member : José Sá da Costa.
11. IEEE CCA 2002 - Conference on Control Applications 2002: International Program
Committee Member: José Sá da Costa.
12. CARS&FOF2002 - 18TH INTERNACIONAL CONFERENCE ON CAD/CAM,
ROBOTICS AND FACTORIES OF THE FUTURE: International Program
Committee Member: José Sá da Costa.
13. Controlo 2002, 5th Portuguese Conference on Automatic Control, Aveiro,
September 2002 : International Program Committee Member : José Sá da Costa and
Carlos Cardeira.
14. RTS'2002, Real-Time and Embedded Systems, Paris, 26-28 mars, 2002, Program
Committee Member: Carlos Cardeira
178
15. Robotica'2002, Festival Internacional de Robotica, Aveiro, April 2002, Program
Committee Member : Carlos Cardeira
16. CILANCE 21st Iberian Latin American Congress on Numerical Methods in
Engineering, Rio de Janeiro, Brazil, December 6-8, 2000, # of part: 200,
Cristóvão Mota Soares, (Scientific Committee)
17. IJCRASH’2000 International Crashworthiness Conference, London, U.K., 9 - 11
September 2000, # of part: 200, Jorge Ambrósio (Scientific Committee)
18. 5th International Conference on Boundary and Finite Element – ELFIN 5, Iasi,
Romenia, 25 - 27 May 2000, # of part: 82, Jorge Ambrósio (Scientific
Committee)
19. EUROMECH COLLOQUIUM 427: Computational Techniques and Applications
in Nonlinear Dynamics of Structures and Multibody Systems, Cachan, France, 24
- 27 September 2001, # of part: 100, Jorge Ambrósio (scientific comitee)
20. Fluid Structure Interaction, Halkidiki, Greece, 2001, Heitor Pina (Scientific
Committee)
21. Canadian Smart Structures and Materials Group; Workshop Annual in Smart
Structures and Materials, Canada, 1998-2001, # of part: 80, Afzal Suleman
(Scientific Committee).
22. 1st Symposium on Passive Safety of Rail Vehicles, Berlin, 1999, M Seabra
Pereira (Scientific Committee).
23. 2nd Symposium on Passive Safety of Rail Vehicles, Berlin, 2001, M Seabra
24. 3rd Symposium on Passive Safety of Rail Vehicles, Berlin, 2002, M Seabra
25. Silva, J. M. M. - Member of the "International Advisory Committee" of the
International Conference in Recent Advances in Modal Analysis Practice, Gold
Coast, Queensland, Australia, 15-17 December 1999.
26. Maia, N. M. M., member of the “Scientific Committee” of the 2nd European
Workshop on Structural Health Monitoring”, Munique, Germany, July 2004.
27. Maia, N. M. M., member of the “Scientific Committee” of the “International
Seminar On Modal Analysis” (ISMA 2004), Leuven, Belgium, September 2004.
28. Maia, N. M. M. and Silva, J. M. M., Members of the “Scientific Committee” of
the international conference “Twelfth International Congress on Sound and
Vibration”, 11-14 July 2005, Lisbon, Portugal.
29. Maia, N. M. M. and Silva, J. M. M., Members of the “Scientific Committee” of
the “International Conference in Vibration Engineering”, September 2005,
Timisioara, Romania.
30. Silva, J. M. M., Member of the “Scientific Committee” of the “International
Operational Modal Analysis Conference (IOMAC)”, April 2005, Copenhagen,
Denmark.
179
31. Elsa Henriques, Member of the Technical and Scientific Committee of the
International Conference RPD 2004 – “Rapid Product Development 2004; Agile
Development for Productivity", Marinha Grande, October 2004.
32. EEngenharia e Tecnologia 2000 - Ensaio de Prospectiva: 2000-2020, 27/28
November 2000, Position: Representing the Portuguese Society of Engineers
Editors of International Journals
1.
Multibody Systems Dynamics- Prof. Jorge Ambrósio (Co-Editor)
2.
Clean Air – International Journal of Environement Combustion Technologies Pedro Coelho (Editor)
Editorial Boards of Scientific Journals
1.
Multibody Systems Dynamics- Prof. Manuel Seabra Pereira
2.
Structural and Multidisciplinary Optimization – Profs. Carlos Mota Soares, Helder
Rodrigues and José Miranda Guedes
3.
Mechanics of Structures and Machines – Profs. Carlos Mota Soares and Trigo
Santos
4.
Boundary Analysis Abstracts and Newsletter – Profs. Carlos Mota Soares and
Heitor Pina
5.
Mechanics of Composite Materials and Structures – Prof. Carlos Mota Soares
6.
Computers and Structures – Prof. Carlos Mota Soares
7.
Engineering Optimization – Prof. Carlos Mota Soares
8.
Computational Engineering Science – Prof. Carlos Mota Soares
9.
Applied Mathematical Modelling – Prof. Heitor Pina
10. Engineering Analysis with Boundary Elements – Prof. Heitor Pina
11. Advances in Fluid Mechanics – Prof. Heitor Pina
12. International Journal Advances in Engineering Software – Prof. Artur Portela
13. International Journal of Crashworthines – Prof. Jorge Ambrósio
14. International Journal on Concurrent Engineering: Research and Applications – Prof.
M. Seabra Pereira
15. International Journal of Nonlinear Dynamics – Prof. Manuel Seabra Pereira
16. Journal of Composites Part B: Engineering – Prof. Cristóvão Mota Soares
17. Shock and Vibration – Prof. Júlio Montalvão e Silva
18. Control Engineering Practice- IFAC Journal – Prof. José Sá da Costa
180
19. International Journal of Applied Mathematics and Computer Science – Prof. José
Sá da Costa
20. Robótica –Prof. José Sá da Costa
21. IEEE Transactions of Fuzzy Systems – Prof. João Miguel Sousa
22. Ocean Engineering – Prof. António Falcão
23. International Journal of Solar Energy – Prof. António Falcão
24. International Journal of Heat and Mass Transfer – Prof. Delgado Domingos
25. International Comunications in Heat and Mass Transfer – Prof. Delgado Domingos
26. Revue Générale de Thermique (Éditions Européennes Thermique et Industrie)
27. Prof. Maria da Graça Carvalho.
28. Encyclopedia of Life Support Systems - Prof. Maria da Graça Carvalho.
29. International Journal of Energy Research– Prof. Maria da Graça Carvalho.
30. Energy – The International Journal” -. Prof. Maria da Graça Carvalho.
31. Editor for the area of Mechanical Engineering of “ACE News” (University of
Aveiro), since May 2002.
32. International Journal of Hydrogen Production and Applications - Reis, Fernandes,
Technical support for the community:
1.
Almas, E. A. M., nominated by IST as an expert for an “Automotive Cranckshaft
Bolt Malfunction” case, in a Court of Law, finished in 2004.
2.
Sampaio, R. P. C., consultant of Centro Hospitalar de Cascais as an expert of
database programming.
3.
Sampaio, R. P. C., consultant of PROENOL (wine biotechnology) as an expert of
mechanical vibrations (production system).
181
IDMEC-Pólo FEUP
Books:
1.
CAG Moura Branco, AA Fernandes, PMST de Castro, "Fadiga de Estruturas
Soldadas", Colecção Manuais Universitários da Fundação Calouste Gulbenkian,
(1st ed, 1986), 2nd ed, 2000
2.
AJM Ferreira AA Fernandes, AT Marques, (Editors), "Modelling of Sandwich
Structures and Adhesive Bonded Joints", Edições FEUP, ISBN 972 752 038-3, 130
pages, 2000
3.
A Silva Ribeiro, "Estática", Série Didáctica, Ciências Aplicadas; 122, ISBN: 972669-363-2, Sector Editorial dos SDE, UTAD, Vila Real, 126 pages, 2000
4.
A Silva Ribeiro, "Geometria das Massas". Série Didáctica, Ciências Aplicadas; 123,
ISBN: 972-669-364-0, Sector Editorial dos SDE, UTAD, Vila Real, 58 pages, 2000
5.
Guy Juanole and Francisco Vasques (eds.), Proceedings of the 3rd IEEE
International Workshop on Factory Communication Systems (WFCS-2000), Porto,
Portugal, September 2000
6.
E Maldonado, J Alexandre, M Lima, "Introduction", "Ventilation, Indoor Air
Quality and Energy Consumption" and "The Performance of a Real Installation",
THERMIE brochure, 2000
7.
A Silva Ribeiro, "Dimensionamento de Elementos de Máquinas", Série Didáctica,
Ciências Aplicadas; 155, ISBN 972-669-434-5, Sector Editorial dos SDE, UTAD,
Vila Real, 246 pages, 2001
8.
J. Falcão e Cunha, Henriqueta Nóvoa, Nuno Nunes, Ana Paula Mesquita (ed.):
IBIC 2001 – Internet Business and the Industry of Construction: Experiences and
Challenges for Management, Architecture and Engineering (book with extended
abstracts), 110 pp., ISBN: 972-752-050-2, FEUP Edições, 2001
9.
Joaquim Silva Gomes, Clito Afonso, Carlos Alberto Conceição António, António
Matos (ed.), CLME' 2001 - 2º Congresso Luso-Moçambicano de Engenharia, 2001
10. AS Ribeiro, AMP de Jesus, "Complementos de estática. Método dos Trabalhos
Virtuais", Série Didáctica - Ciências Aplicadas, nº 216, ISBN 972-669-526-0,
UTAD, 2002
11. A Oliveira, S Riffat, C Afonso, "Sustainable Energy Technologies", Proceedings of
the International Conference on Sustainable Energy Technologies (SET2002),
ISBN: 972-95806-9-3, Ed. Popdesign, 2002
12. EMM Fonseca, PMM, Vila Real, "Análise Não-Linear do Comportamento TermoMecânico de Componentes em Aço Sujeitas ao Fogo", Série Estudos, Vol. 58,
Edição do Instituto Politécnico de Bragança, ISBN: 972-745-060-1, 2002
182
13. Maria Teresa Restivo, Maria de Fátima Chouzal, Fernando Gomes de Almeida,
Joaquim Gabriel Mendes and Jorge Manuel de Matos Reis, “Laboratórios de
Instrumentação para Medição: Aplicações na Área de Engenharia Mecânica – 2nd
edition”, Edição da Direcção de Sistemas e Tecnologias de Informação da
Universidade do Porto, ISBN 972-8025-16-5, Depósito Legal nº191995/03,
February 2003
14. Maria Teresa Restivo, Maria de Fátima Chouzal e Fernando Gomes de Almeida,
"Medição de Deformação", Edição da Direcção de Sistemas e Tecnologias de
Informação da Universidade do Porto, ISBN - 972-8025-20-3, Depósito Legal:
196032/03, May 2003
15.
Joaquim A. Jorge, Nuno J. Nunes, J. Falcão e Cunha (eds): Interactive Systems –
Design, Specification, and Verification, 10th International Workshop, DSV-IS
2003, Funchal, Madeira Island, Portugal, June 2003, Revised Papers, LNCS –
Lecture Notes in Computer Science, Vol. 2884, Berlin: Springer-Verlag, 2003,
xiii+427 pp., ISSN: 0302-9743, ISBN: 3-540-20159-9, 2003
16. Joaquim Silva Gomes, Carlos Alberto Conceição António, Clito Afonso, António
Matos, “CLME´2003 - 3º Congresso Luso-Moçambicano de Engenharia, ISBN
972-9025-62-2, 2003
17.
CA Moura Branco, José Martins Ferreira, José Domingos Moreira Costa, A Silva
Ribeiro, "Projecto de Órgãos de Máquinas", Colecção de Manuais Universitários Fundação Calouste Gulbenkian. (in press)
18. Thilo Sauter, Francisco Vasques (eds.), Proceedings of the 5th IEEE International
Workshop on Factory Communication Systems (WFCS-2004), Vienna, Austria,
September 2004.
"Medição de Temperatura", Edição Universidade do Porto – Reitoria, ISBN - 9728025-28-9, Setember 2004
Books Chapters:
1.
Fernando Almeida, António Lopes, Paulo Abreu, “Force.-.Impedance Control: a
new control strategy of robotic manipulators” in “Recent Advances in
Mechatronics”, O. Kaynak, S. Tosunoglu and M. Ang, Jr. (Eds.), Springer – Verlag,
Singapore 1999, pp. 126-137, ISBN 981-4021-34-2, 1999
2.
JM Moreira, JF Sousa, "Planning and Control Indicators for Mass Transit
Companies", in "Modelling and Management in Transportation" (Vol. 2), A
Adamski, et al. (Eds.), Poland, pp.237-242, 1999
3.
JR Silva, JF Sousa, "Vehicle Replacement: A Decision Support System for Fleet
Managers and Dealers", in "Modelling and Management in Transportation" (Vol.
1), Adamski, A., et al (Eds.), Poland, pp. 345-350, 1999
183
4.
J Borges, M Levene, "Data Mining of User Navigation Patterns", in "Web Usage
Mining and User Profiling", B Masand, M Spiliopoulou (Eds.), Lecture Notes in
Artificial Intelligence, Vol. 1836, Springer-Verlag, Berlin, pp. 92-111, 2000
5.
Jorge Pinho de Sousa, João Falcão e Cunha, Rui Campos Guimarães, José Pinto
Paixão: GIST - Um Sistema de Apoio à Decisão para o Planeamento Operacional
de Transportes Colectivos; in Casos de Aplicação da Investigação Operacional,
Carlos Henggeler Antunes e Luís Valadares Tavares (eds.), Lisboa: McGraw-Hill
Portugal, xii+415 pp., ISBN: 972-773-075-2, pp. 108-130, 2000
6.
JP Sousa, JF Cunha, JF Sousa, "Transport Operational Planning - the GIST Case
Study", in "Improving Knowledge and Tools for Transportation and Logistics
Development', Bielli, M., and P. Carotenuto (Eds.), Roma, pp. 501-508, 2000
7.
Luís Miguel Pinho, Francisco Vasques, "An Architecture for Reliable Distributed
Computer-Controlled Systems". In Architecture and Design of Distributed
Embedded Systems, Bernd Kleinjohann (Ed.), Kluwer 2001, ISBN 0-7923-7345-6,
pp. 43-52, 2001
8.
J Falcão e Cunha, Henriqueta Nóvoa, Nuno Nunes, Ana Paula Mesquita (ed.): IBIC
2001 – Internet Business and the Industry of Construction: Experiences and
Challenges for Management, Architecture and Engineering (book with extended
abstracts), pp.110, ISBN: 972-752-050-2, FEUP Edições, 2001
9.
Nuno Jardim Nunes, J Falcão e Cunha, "WISDOM – Whitewater Interactive
System Design with Object Models", in Object Modeling and User Interface
Design, Mark Van Harmelen (Ed.), Addison-Wesley, Object Technology Series,
352
pp.,
ISBN:
0-201-65789-9,
pp.197-243
(http://www.awlonline.com/product/0,2627,0201657899,00.html), 2001
10. Rogério A. Fernandes, Martins, "O Método dos Elementos Finitos na Faculdade de
Engenharia da Universidade do Porto (Uma Perspectiva Histórica)", In: Memórias
da FEUP. FEUP Edições, pp.186-195, 2001
11. ODS Mota, "Services in Processing Plants - Heat Generation, Encyclopedia of
Dairy Sciences", Elsevier Science, Ltd, 2002
12. ODS Mota, "Services in Processing Plants – Compressed Air, Encyclopedia of
Dairy Sciences", Elsevier Science, Ltd, 2002
13. A Oliveira, C Afonso, "Services in Processing Plants: Refrigeration", Encyclopedia
of Dairy Sciences, Vol.xx, Academic Press, 2002
14. FL Matthews, PP Camanho, "Stresses in mechanical fastened joints", 3rd chapter of
Recent Advances in Structural Joints and Repairs for Composite Materials, L Tong,
C Soutis, (Editors), Kluwer Academic Publishers, Dordrecht, The Netherlands,
2003
15. Manuel F Silva, JA Tenreiro Machado, António M Lopes, 2003, "Gait Analysis of
Natural and Artificial Walking Systems", Intelligent Systems at the Service of
Mankind - Volume I, Wilfried Elmenreich, J Tenreiro Machado, Imre J Rudas
(Eds), Ubooks, ISBN 3-935798-25-3, pp.87-98, November 2003
184
"Uma experiência de E-Learning no domínio da Instrumentação para Medição",
publicado em Reflectir Bolonha: Reformar o Ensino Superior. Um arquivo
documental sobre a construção do Espaço Europeu de Ensino Superior, Edição
Universidade do Porto, ISBN972-8025-22-X, Depósito Legal: 199330/03, July
2003
17. Joaquim Mendes, Maria Teresa Restivo, Carlos Moreira da Silva e Jorge Manuel
Reis, "Reaproveitamento de Equipamentos Obsoletos no Desenvolvimento de um
Sistema de Medição Dimensional para Apoio ao Ensino da Engenharia", publicado
em “Reflectir Bolonha: Reformar o Ensino Superior. Um arquivo documental sobre
a construção do Espaço Europeu de Ensino Superior”, University of Porto,
ISBN972-8025-22-X, July 2003
18.
Joaquim A. Jorge, Nuno J. Nunes, J. Falcão e Cunha (eds): Interactive Systems –
Design, Specification, and Verification, 10th International Workshop, DSV-IS
2003, Funchal, Madeira Island, Portugal, June 2003, Revised Papers, LNCS –
Lecture Notes in Computer Science, Vol. 2884, Berlin: Springer-Verlag, 2003,
xiii+427 pp., ISSN: 0302-9743, ISBN: 3-540-20159-9, 2003
1.
JMA César de Sá, RM Natal Jorge, "New Enhanced Strain Elements for
Incompressible Problems", International Journal for Numerical Methods in
Engineering, Vol.44, pp.229-248, 1999
2.
J Sabino Domingues, A Portela, PMST de Castro, "Trefftz Boundary Element
Method Applied to Fracture Mechanics", Engineering Fracture Mechanics, Vol.64,
pp.67-86, 1999
3.
JPM Gonçalves, PMST de Castro, "Application of the Line Spring Model to Some
Complex Geometries, and Comparison with Three-Dimensional Results",
International Journal of Pressure Vessels and Piping, Vol.76, pp. 551-560, 1999
4.
PP Camanho, FL Matthews, "A progressive damage model for mechanically
fastened joints in composite laminates", Journal of Composite Materials, Vol.33,
pp.2248-2280, 1999
5.
PP Camanho, FL Matthews, "Delamination onset prediction in mechanically
fastened joints in composite laminates", Journal of Composite Materials, vol.33,
pp.906-927, 1999
6.
Eduardo Tovar, Francisco Vasques, "Real-Time Fieldbus Communications Using
Profibus Networks", IEEE Transactions on Industrial Electronics, Vol.46, pp.2411251, IEEE Press, December 1999
7.
Eduardo Tovar, Francisco Vasques, "Cycle Time Properties of the PROFIBUS
Timed Token Protocol", Computer Communications, Vol.22, pp.1206-1216,
Elsevier Press, September 1999
185
8.
Eduardo Tovar, Francisco Vasques, Alan Burns, "Supporting Real-Time
Distributed Computer-Controlled Systems with Multi-hop P-NET Networks",
Control Engineering Practice, vol. 7, August 1999, pp. 1015-1025, Pergamon Press.
9.
Luis Miguel Pinho, Francisco Vasques, "Replica Management in Real-Time Ada 95
Applications", Ada Letters, Vol.XIX, pp.21-27, ACM Press, July 1999
10. Magalhães, A. P. and Silva, J. G., "Stabilising Pre-Run-Time Schedules With the
Help of Grace Time", Journal of Real-Time Systems, Vol.17, pp.65-86, 1999
11. JS Cabral, LM Ribeiro, “The Use and Misuse of Statistical Tools”, Journal of
Material and Processing Technologies, Vol.92-93, pp. 288-292, 1999
12. A.S. Camanho, R.G. Dyson, "Efficiency, Size, Benchmarks and Targets for Bank
Branches: An Application of Data Envelopment Analysis", Journal of the
Operational Research Society, Vol.50, pp.903-915, 1999
13. JBLM Campos, ODS Mota, AMFR Pinto, "Measurement of Mass Transfer between
the Bubble and Dense Phases in a Fluidised-Bed Combustor", Combustion and
Flame, 116,105, 1999
14. P Ribeiro, M Petyt, "Non-linear vibration of composite laminated plates by the
hierarchical finite element method", Composite Structures, Vol.46, pp.197-208,
1999
15. P Ribeiro, M Petyt, "Non-linear vibration of beams with internal resonance by the
hierarchical finite element method" Journal of Sound and Vibration, 1999, Vol.224,
pp.591-624, 1999
16. P Ribeiro, M Petyt, "Multi-modal geometrical non-linear free vibration of
composite laminated plates", Journal of Sound and Vibration, 1999, Vol.225,
pp.127-152, 1999
17. P Ribeiro, M Petyt, "Geometrical non-linear, steady-state, forced, periodic vibration
of plates", Part I: Model and convergence studies", Journal of Sound and Vibration,
1999, Vol.226, pp.955-983, 1999
18. P Ribeiro, M Petyt, "Geometrical non-linear, steady-state, forced, periodic vibration
of plates", Part II: Stability study and analysis of multi-modal, multi-frequency
response", Journal of Sound and Vibration, 1999, Vol.226, pp.985-1010, 1999
19. P Ribeiro, M Petyt, "Non-linear vibration of plates by the hierarchical finite element
and continuation methods", International Journal of Mechanical Sciences, Vol.41,
pp.437-459, 1999
20. CA Conceição António, J Trigo Barbosa, L Simas Dinis, "Optimal design of beam
reinforced composite structures under elasto-plastic loading conditions", Structural
Optimization Research Journal, Springer-Verlag, Editores: G. Rozvany (Germany)
e J. Sobieski (USA) accepted for publication on December 1998, nº 633 (in
forthcoming papers 1999)
21. CA Conceição António, "Optimisation of geometrically non-linear composite
structures based on load-displacement control", Composite Structures, Elsevier
Science Ltd., Editor: I. H. Marshall, U.K., Vol.46, pp.345-356, 1999
186
22. RA Martins, PA Areias, AP Jesus, JS Domingues, "Comportamento dinâmico do
Elemento P15N para flexão de placas", Revista Internacional de Métodos
Numéricos para Cálculo Y Diseño en Ingeniería, Vol.15, pp.193-205, 1999
23. MLR Madureira, FJMQ de Melo, "A Hybrid Formulation in the Stress Analysis of
Curved Pipes", Engineering Computations, Vol.17, pp.970-980, 2000
24. RM Natal Jorge, RPR Cardoso, JMA César de Sá, "An Automatic Quadrilateral
Mesh Generator for Adaptive Procedures in Bulk Forming Processes", Engineering
Computations, Vol.17, pp.950-969, 2000
25. JPM Gonçalves, MFSF de Moura, PMST de Castro, AT Marques, "Interface
Element Including Point-To-Surface Contraints for Three-Dimensional Problems
With Damage Propagation", Engineering Computations, Vol.17, pp.28-47, 2000
26. LFM Silva, JPM Gonçalves, FMF Oliveira, PMST de Castro, "Multiple-Site
Damage in Riveted Lap-Joints: Experimental Simulation and Finite Element
Prediction", International Journal of Fatigue, Vol.22, pp.319-338, 2000
27. LFM Silva, JPM Gonçalves, FMF Oliveira, PMST de Castro "Applicability of the
SPATE Technique to the Detection of Hidden Cracks", NDT & E International,
Vol.33, pp.7-13, 2000
28. MFSF Moura, JPM Gonçalves, AT Marques, PMST de Castro, "Prediction of
Compressive Strength of Carbon-Epoxy Laminates Containing Delamination by
Using a Mixed-Mode Damage Model", Composite Structures, Vol.50, pp.151-157,
2000
29. AJM Ferreira, PP Camanho, M Cristina Fernandes, MAV Figueiredo, AA
Fernandes, "Taguchi Analysis of Polymer Concrete Properties", Composite
Mechanics and Design (Mekhanika Kompozitsionnykh Materialov i Konstruktsii,
The Russian Academy of Sciences), Vol.6, pp.541-550, 2000
30. PP Camanho, FL Matthews, "Bonded Metallic Inserts for Bolted Joints in
Composite Laminates", Journal of Materials: Design and Applications Proceedings of the Institution of Mechanical Engineers Part L, Vol.214, pp.33-40,
2000
31. José Borges and Mark Levene, "A Fine Grained Heuristic to Capture Web
Navigation Patterns", SIGKDD Explorations, Vol. 2, No. 1, pp. 40-50, 2000
32.
Nuno Jardim Nunes, Marco Toranzo, João Falcão e Cunha, Jaelson Castro, Srdjan
Kovacevic, Dave Roberts, Jean-Claude Tarby, Mark Collins-Cope, Mark van
Harmelen: Interactive System Design with Object Models; in ECOOP’99 Workshop
Reader, Ana Moreira, S. Demeyer (eds.), Lecture Notes in Computer Science,
1743, Springer-Verlag, 2000, pp. 267-287. (ISI), 2000
33.
João Falcão e Cunha, Jorge Pinho de Sousa: The Bus Stops Here - GIST:
Decision-support system for public transport planning, in OR/MS Today, , Vol. 27,
N. 2, pp. 48-53. ISSN: 1085-1038, April 2000
34.
Nuno Jardim Nunes, J. Falcão e Cunha: WISDOM – A UML based Architecture
for Interactive Systems, in Interactive Systems - Design, Specification, and
187
Verification, LNCS - Lecture Notes in Computer Science, Vol. 1946 (Revised
Papers of the 7th International Workshop on Design, Specification, and Verification
of Interactive Systems, DSV-IS 2000, Limerick, Ireland, 2000.06.05-06), Philippe
Palanque, Fabio Paternò (eds.), Berlin: Springer-Verlag, 2001, x+251 pp., ISSN:
0302-9743, ISBN: 3-540-41663-3, pp.191-205, (ISI), 2000
35.
Nuno Jardim Nunes, J. Falcão e Cunha: Wisdom: A Software Engineering Method
for Small Software Development Companies, IEEE Software, Vol.17, No. 5,
September/October 2000 (special issue in Software Engineering in-the-Small), pp.
113-119. ISSN: 0740-7459. (ISI), 2000
36.
Nuno Jardim Nunes, J. Falcão e Cunha: Towards a UML Profile for Interaction
Design: the Wisdom Approach, in «UML» 2000 - The Unified Modeling Language
- Advancing the Standard, LNCS - Lecture Notes in Computer Science, Vol. 1939
(Revised Papers of UML’2000, The Third International Conference on the Unified
Modeling Language – Advancing the Standard, York, UK, 2000.10.02-03), Andy
Evans, Stuart Kent, Bran Selic (eds.), Berlin: Springer-Verlag, 2000, 572 pp., ISSN:
0302-9743, ISBN: 3-540-41663-3, pp. 101-116. (ISI), 2000
37. JS Cabral, H Alvelos, “Statistical Methods for Controlling Wine Tasting Panels”,
Ciência e Técnica Vitivinícola, 15 (1), pp. 15-26, 2000
38. S Varga, A Oliveira, "Ventilation Terminals For Use With Light Pipes in Buildings
– a CFD Study", Applied Thermal Engineering, Vol.20, Pergamon Press, 2000
39. S Riffat, A Oliveira, J Facão, G Gan, L Shao, "Thermal Performance of a Closed
Wet Cooling Tower For Chilled Ceilings – Measurement and CFD Simulation",
International Journal of Energy Research, Vol.24, John Wiley & Sons, 2000
40. J Facão, A Oliveira, "Thermal Behaviour of Closed Wet Cooling Towers For Use
With Chilled Ceilings", Applied Thermal Engineering, Vol.20, Pergamon Press,
2000
41. A Oliveira, C Afonso, S Riffat, P Doherty, "Thermal Performance of a Novel Air
Conditioning System Using a Liquid Desiccant", Applied Thermal Engineering,
Vol.20, Pergamon Press, 2000
42. C Afonso, A Oliveira, "Solar Chimneys: Simulation and Experiment", Energy and
Buildings, Vol.32, Elsevier Science, 2000
43. MLR Madureira, FJMQ de Melo, "A Hybrid Formulation in the Stress Analysis of
Curved Pipes", Engineering Computations, Vol.17, pp.970-980, 2000
44. CA Conceição António, J Trigo Barbosa, L Simas Dinis, "Optimal Design of Beam
Reinforced Composite Structures Under Elasto-Plastic Loading Conditions",
Structural and Multidisciplinary Optimization, Journal of the International Society
for Structural and Multidisciplinary Optimization (ISSMO), Springer-Verlag, Vol.
19, pp.50-63, 2000
45. AJM Ferreira, JT Barbosa, AT Marques, JC de Sá, "Non-Linear Analysis of
Sandwich Shells: The Effect of Core Plasticity", Computers and Structures,
Pergamon, Elsevier Science Ltd., Vol.76, pp.337-346, 2000
188
46. AJM Ferreira, JT Barbosa, "Buckling Behavior of Composite Shells", Composite
Structures, Elsevier, Elsevier Science Ltd., Vol.50, pp.93-98, 2000
47. AJ Mendes Ferreira, A Torres Marques, J César de Sá, "Analysis of reinforced
concrete with external composite strengthning", Composites: Part B, Vol.31,
pp.527-534, 2000
48. EMM Fonseca, Elza, CAM Oliveira, "Métodos Avançados de Cálculo de Estruturas
Metálicas Submetidas à Acção do Fogo", Revista Internacional de Métodos
Numéricos y Diseño en Engenieria, 2000
49. Paulo Davim, CA Conceição António, "Optimal drilling of particulate metal matrix
composites based on experimental and numerical procedures", International Journal
of Machine Tools & Manufacture, Pergamon, Elsevier Science Ltd., Editor: T.
Dean (UK), Vol.41, pp.21-31. 2000
50. PP Camanho, CG Dávila, DR Ambur “Numerical Simulation of Delamination
Growth in Composite Materials”, NASA-Technical Paper 211041, National
Aeronautics and Space Agency, USA, 2001
51. MV Figueiredo, FMF Oliveira, JPM Gonçalves, PMST de Castro, AA Fernandes,
"Fracture Analysis of Forks of a Heavy Duty Lift Truck", Engineering Failure
Analysis, Vol.8, pp.411-421, 2001
52. AMP de Jesus, AS Ribeiro, APortela, PMST de Castro, AA Fernandes, "Software
Development for the Fatigue Life Prediction of Structural Components", Welding in
the World, Vol.45, pp.3-7, 2001
53. RM Natal Jorge, AA Fernandes, “Design of a Steam-Heated Sterilizer Based on
Finite Element Stress Analysis”, International Journal of Pressure Vessels and
Piping, Vol.78, pp.627-635, 2001
54. AJM Ferreira, PP Camanho, AT Marques, AA Fernandes, “Modelling of Concrete
Beams Reinforced with FRP Re-bars”, Composite Structures, Vol.53, pp.107-116,
2001
55. JMA César de Sá, PMA Areias, RM Natal Jorge, “Quadrilateral Elements for the
Solution of Elasto-Plastic Finite Strain Problems”, International Journal for
Numerical Methods in Engineering, Vol. 17, pp. 883-917, 2001
56. FJMQ de Melo, JO Carneiro, HR Lopes, JF Dias Rodrigues, JF Silva Gomes, "Use
of Pseudo-Dynamic Techniques in the Structural Analysis of Piping Systems under
Seismic Loads", Journal of Strain Analysis for Engineering Design, Vol. 36,
pp.441-451, 2001
57. SD Pastrama, PMST de Castro, “Cálculo de Factores de Intensidade de Tensão
Usando o Método da Composição”, Revista Iberoamericana de Ingenieria
Mecanica, Vol.5, pp.17-30, 2001
58. Luis Miguel Pinho, Francisco Vasques, Luís Ferreira, “Programming
Multicasts in CAN”, ACM Ada Letters, Vol. XXI, pp.79-84, March 2001
Atomic
189
59. Eduardo Tovar, Francisco Vasques, “Distributed Computing for the Factory-Floor:
a Real-Time Approach using WorldFIP Networks”, Computers in Industry, 44,
pp.11-31, Elsevier Press, 2001
60. Luis Miguel Pinho, Francisco Vasques, "To Ada or not To Ada: Adaing vs. Javaing
in Real-Time Systems", ACM Ada Letters, 2001
61. Mark Levene, José. Borges and George Loizou, "Zipf s law for web surfers",
Knowledge and Information Systems an International Journal, Vol. 3, No. 1, pp.
120-129, 2001
62.
Henriqueta Nóvoa, J. Falcão e Cunha, António Amador: The AMMnet Case Study:
Integrating Internet Technologies in the Procurement Process of a Civil
Construction SME, in International Journal of E-Business Strategy Management,
Vol. 3, No. 1, 2001, pp.55-67, ISSN: 1467-0305, 2001
63.
T. Galvão Dias, J. Vasconcelos Ferreira, J. Falcão e Cunha: Evaluating a DSS for
Operational Planning in Public Transport Systems: Ten Years of Experience with
the GIST System, in Computer Aided Scheduling of Public Transport, Stefan Voß,
Joachim R.Daduna (eds.), Lecture Notes in Economics and Mathematical Systems,
Berlin: Springer-Verlag, Vol. 505, April 2001, 468 pp., ISSN: 0075-8442, ISBN: 3540-42243-9. pp.167-179. (ISI), 2001
64.
Henriqueta Nóvoa, J. Falcão e Cunha, António Amador: The AMMnet Case Study:
Integrating Internet Technologies in the Procurement Process of a Civil
Construction SME, in International Journal of E-Business Strategy Management,
Vol. 3, No. 1, 2001, pp.55-67, ISSN: 1467-0305, 2001
65. R.G. Dyson, R. Allen, A.S. Camanho, V.V. Podinovski, C.S. Sarrico and E.A.
Shale, "Pitfalls and protocols in DEA", European Journal of Operational Research,
Vol. 132, pp.245-259, 2001.
66. A Oliveira, A Silva, C Afonso e S Varga, "Experimental and Numerical Analysis of
Natural Ventilation With Combined Light/Vent Pipes", Applied Thermal
Engineering, Vol.21, Pergamon Press, 2001
67. N Rangel, A Santos, C Pinho, "Pressure Drop in Packed Shallow Beds of
Cylindrical Cork Stoppers", Trans IChemE, Vol.79, Part A, July 2001
68. CA Conceição António, "A hierarchical genetic algorithm for reliability based
design of geometrically non-linear composite structures", Composite Structures,
Elsevier Science, Vol.54, pp.37-47, 2001
69. MH Barros, RAF Martins, CC Ferreira, "Tension Stiffening Model with Increasing
Damage for Reinforced Concrete", Engineering Computations, Vol.18, pp.759-785,
2001
70. Catarina F Castro, Luisa Costa Sousa, CAC António, JMA César de Sá, "An
efficient algorithm to estimate optimal preform die shape parameters in forging",
Engineering Computations, International Journal for Computer-Aided Engineering
and Software, MCB University Press, Vol.18, pp.1057-1077, 2001
190
71. J Paulo Davim, CA Conceição António, "Optimal drilling of particulate metal
matrix composites based on experimental and numerical procedures", International
Journal of Machine Tools & Manufacture, Elsevier Science, Vol.41, pp.21-31, 2001
72. J Paulo Davim, CA Conceição António, "Optimisation of cutting conditions in
machining of aluminium matrix composites using a numerical and experimental
model", Journal of Materials Processing Technology, Elsevier Science, Vol.112,
pp.78-82, 2001
73. AJM Ferreira, LC Sousa, "Modelling of Sandwich Structures by the use of Interface
Finite Elements", MECANICA, Buletinul Stiintific al Universitattii Politehnica din
Timisoara, Vol. 46, pp.13-20, 2001
74. LC Sousa, CF Castro, CAC António, AD Santos, "Inverse methods applied to
industrial forging processes", International Journal of Forming Processes,
Computational and physical methods, official Journal of ESAFORM, Vol.4, nº 3-4,
2001
75. P Ribeiro, "The second harmonic and the validity of Duffing´s equation for
vibration of beams with large displacements", Computers & Structures, Vol.79,
pp.107-117, 2001
76. P Ribeiro, L Alves, J Marinho, "Experimental Investigation on the Occurrence of
Internal Resonances in a Clamped-Clamped Beam”, International Journal of
Acoustics and Vibration, Vol.6, pp.169-173, 2001
77. P Ribeiro, "Hierarchical finite element analyses of geometrically non-linear
vibration of beams and plane frames", Journal of Sound and Vibration, Vol.246,
pp.225-244, 2001
78. AMB de Morais, JF Silva, AT Marques, PMST de Castro, "Mode II interlaminar
fracture of filament wound angle-ply specimens", Applied Composite Materials,
Vol.9, pp.117-129, 2002
79. JMA César de Sá, RM Natal Jorge, RA Fontes Valente, PMA Areias,
"Development of shear locking-free shell elements using an enhanced assumed
strain formulation", International Journal for Numerical Methods in Engineering,
Vol.53, pp.1721-1750, 2002
80. PP Camanho, CG Dávila, "Mixed-Mode Decohesion Finite Elements for the
Simulation of Delamination in composite Materials", NASA-Technical
Memorandum 211737, National Aeronautics and Space Agency, U.S.A., 2002
81. EM Fonseca, FQ de Melo, CM Oliveira, "Determination of flexibility factors in
curved pipes with end restrains using a semi-analytic formulation", Intern. Journal
of Press. Vessels & Piping Vol.79, pp.829-840, 2002
82. JPM Gonçalves, MFSF de Moura, PMST de Castro, "A three dimensional finite
element model for stress analysis of adhesive joints", International Journal of
Adhesion & Adhesives, Vol.22, pp.357-365, 2002
191
83. M Santare, SD Pastrama, PMST de Castro, "A practical fracture analysis for
functionally graded materials", Journal of the Mechanical Behaviour of Materials,
Vol.13, pp.17-32, 2002
84. D Cojocaru, SD Pastrama, PMST de Castro, "Finite element weight function
application for a cracked disk", International Journal of Fracture, Vol.116, pp.L9L14, 2002
85. Luís Almeida, Eduardo Tovar, José A. Fonseca, Francisco Vasques, “Schedulability
Analysis of Real-Time Traffic in WorldFIP Networks: an Integrated Approach”,
IEEE Transactions on Industrial Electronics, Vol. 49, October 2002
86. Eduardo Tovar, Francisco Vasques, Alan Burns, “Communication Response Time
in P-NET Networks: Worst-Case Analysis Considering the Actual Token
Utilisation”, Journal of Real-Time-Systems, Vol.22, pp.229-249, Kluwer Academic
Publishers, 2002
87. J. Ferreira, F. Gomes de Almeida and M. R. Quintas, “A Semi-Empirical Model for
a Hydraulic Servo-Solenoid Valve”, Proceedings of the IMechE, Part I: Journal of
Systems and Control Engineering, Vol.216, pp.237-248, 2002
88.
T Galvão Dias, J Pinho de Sousa, J Falcão e Cunha, "Genetic Algorithms for the
bus driver scheduling problem: a case study", J Opl Res Soc-Journal of the
Operational Research Society, Vol.53, pp.324-335, ISSN: 0160-5682. (ISI), 2002
89. JS Cabral, H Alvelos, “Assessing the Performance of Control Charts for Monitoring
Customer Survey Data”, Investigação Operacional, vol. 22, pp.181-198, 2002
90. JS Cabral, G Beirão, “The Reaction of the Portuguese Stock Market to ISO 9000
Certification”, Total Quality Management, Vol.13, pp.465-474, 2002
91. A Oliveira, C Afonso, J Matos, S Riffat, M Nguyen, P Doherty, "A Combined Heat
and Power System for Buildings Driven by Solar Energy and Gas", Applied
Thermal Engineering, Vol.22, Pergamon Press, 2002
92. A Oliveira, S Varga, C Afonso, "Characterisation of Thermal Diode Panels For Use
in the Cooling Season in Buildings", Energy and Buildings, Vol.34, Elsevier
Science, 2002
93. EM Fonseca, FQ de Melo, CM Oliveira, "Determination of flexibility factors in
curved pipes with end restrains using a semi-analytic formulation", Intern. Journal
of Press. Vessels & Piping Vol.79, pp.829-840, 2002
94. Luísa C. Sousa, Catarina F. Castro, C A Conceição António, Abel Santos, “Inverse
methods in design of industrial forging processes”, Journal of Materials Processing
Technology, Vol.128, pp.266-273, 2002
95. CA Conceição António, J Paulo Davim, "Optimal cutting conditions in turning of
particulate metal matrix composites based on experimental and genetic search",
Composites Part A: Applied Science and Manufacturing, Elsevier Science, Vol.33,
pp.213-219, 2002
192
96. CA Conceição António, N Magalhães Dourado, "Metal-forming process
optimisation by inverse evolutionary search", Journal of Materials Processing
Technology, Elsevier Science, Vol.121, pp.403-413, 2002
97. EMM Fonseca, CA Magalhães de Oliveira, "Métodos Avançados de Cálculo de
Estruturas Metálicas Submetidas à Acção do Fogo", Revista Internacional de
Métodos Numéricos para Cálculo Y Diseño en Ingenieria, Vol.18, 2002
98. CA Conceição António, "A multilevel genetic algorithm for optimization of
geometrically non-linear stiffened composite structures", Structural and
Multidisciplinary Optimization, Journal of The International Society for Structural
and Multidisciplinary Optimization, Vol.24, pp.372-386, 2002
99. P Ribeiro, "Forced geometrically non-linear vibration of cylindrical shallow shells
by the hierarchical finite element, shooting and Newton methods", Structural
Dynamics, EURODYN2002, Grundman & Schuëller (eds.), pp.535-540, Swets &
Zeitlinger, Lisse, ISBN 90 5809 510 X, 2002
100. P Ribeiro, "Periodic Vibration of Plates with Large Displacements", AIAA Journal,
Vol. 40, Technical Notes, pp.185-188
101. PMM Vila Real, PAG Piloto, J-M Franssen, "A New Proposal of a simple Model
for Lateral-Torsional Buckling of Unrestrained Steel I-Beams in case of Fire:
Experimental and Numerical validation", Journal of constructional Steel Research,
Vol.59, pp 179-199; Elsevier Science; December 2002
102. Elza Maria Morais, Carlos Alberto Magalhães, "Advanced Calculation Methods for
Metallic Structures Submitted to Fire Action", International Journal of Numerical
Methods for Engineering Calculation and Design, Vol.18, pp.367-384, 2002
103. RA Fontes Valente, RM Natal Jorge, RPR Cardoso, JMA César de Sá, JJA Grácio,
"On the use of an enhanced transverse shear strain shell element for problems
involving large rotations", Computational Mechanics, Vol.30, pp.286-296, 2003
104. FM Andrade Pires, JMA César de Sá, L Costa Sousa, RM Natal Jorge, "Numerical
modelling of ductile plastic damage in bulk metal forming", International Journal
of Mechanical Sciences, Vol.45, pp.273-294, 2003
105. RJ Alves de Sousa, RM Natal Jorge, RA Fontes Valente, JMA César de Sá, "A new
volumetric and shear locking-free 3D enhanced strain element", Engineering
Computations, Vol.20, pp.896-925, 2003
106. MCS Ribeiro, CML Tavares, M Figueiredo, AA Fernandes, AJM Ferreira,
"Bending characteristics of resin concretes", Materials Research - Revista Ibero
Americana de Materiais, Vol.6, pp.247-254, 2003
107. LFM Silva, DJ Stewardson, FMF Oliveira, PMST de Castro, "Fatigue crack growth
of rails for railways", Journal of Rail and Rapid Transit – Part F, Vol.217, pp.8998, 2003
108. CG Dávila e PP Camanho, "Failure criteria for FRP laminates in plane stress",
NASA Technical Memorandum 212663, National Aeronautics and Space
Administration, U.S.A., 2003
193
109. PP Camanho, CG. Dávila, MF de Moura, "Numerical simulation of mixed-mode
progressive delamination in composite materials", Journal of Composite Materials,
Vol.37, pp.1415-1438, 2003
110. PP Camanho, CG Dávila, MF de Moura, "Numerical simulation of mixed-mode
progressive delamination in composite materials", Journal of Composite Materials,
Vol.37, pp.1415-1438, 2003
111. AB de Morais, MF de Moura, JP Gonçalves, PP Camanho, "Analysis of crack
propagation in double cantilever beam tests of multidirectional laminates",
Mechanics of Materials, Vol.35, pp.641-652, 2003
112. JPM Gonçalves, MFSF de Moura, AG Magalhães, PMST de Castro, "A three
dimensional progressive failure analysis of adhesive joints using interface finite
elements", Fatigue and Fracture of Engineering Materials and Structures, Vol.26,
pp.479-486, 2003
113. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2003, “Position
/Force Control of a Walking Robot”, MIROC - Machine Intelligence and Robotic
Control, ISSN 1345-2681, Vol. 5, n. 2, pp. 33 – 44, 2003
114. L. Pinho, F. Vasques, “Reliable Real-Time Communication in CAN Networks",
IEEE Transactions on Computers, Vol. 52, IEEE Computer Science Press,
December 2003
115. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2003, “Position
/Force Control of a Walking Robot”, MIROC - Machine Intelligence and Robotic
Control, ISSN 1345-2681, Vol. 5, pp.33–44, 2003
116. J. Falcão Carneiro, A. Pessoa de Magalhães, F. Gomes de Almeida and A. Barata
da Rocha, “A contribution to optimal loading/unloading performance in automatic
press feeding: the MANPRESS robot”, Polish Academy of Sciences, Archives of
Civil and Mechanical Engineering, Vol III, pp39-58, 2003
117. Lia Patrício, J. Falcão e Cunha, Raymond Fisk, Oscar Pastor: Essential Use Cases
in the Design of Multi-Channel Service Offerings – a Study of Internet Banking, in
Proceedings of ICWE 2003 – 3rd International Conference on Web Engineering,
LNCS – Lecture Notes in Computer Science, Vol. 2722 – Web Engineering, Juan
Manuel Cueva Lovelle, Bernardo Martín González Rodriguez, Luis Joyanes
Aguilar, José Emílio Labra Gayo, Maria del Puerto Paule Ruiz (Eds.), Berlin:
Springer-Verlag, 2003, xix+554 pp., ISSN: 0302-9743, ISBN: 3-540-40522-4, pp.
468-471. (ISI), 2003
118. Lia Patrício, J. Falcão e Cunha, Raymond Fisk, Nuno Jardim Nunes: Addressing
Marketing Requirements in User-Interface Design for Multiple Platforms, in
Proceedings of DSV-IS 2003 – the Tenth Workshop on the Design, Specification
and Verification of Interactive Systems, LNCS – Lecture Notes in Computer
Science, Vol. 2884 – Interactive Systems Design, Specification, and Verification,
Joaquim A. Jorge, Nuno Jardim Nunes, João Falcão e Cunha (eds) Berlin: SpringerVerlag, 2003, xiii+427 pp., ISSN: 0302-9743, ISBN: 3-540-20159-9, pp. 331-345.
(ISI), 2003
194
119. Lia Patrício, Raymond Fisk, J. Falcão e Cunha: Improving Satisfaction with Bank
Service Offerings: Measuring the Contribution of each Delivery Channels, in
Managing Service Quality Journal, Vol. 13, No. 6, 2003, p. 471-483, ISSN: 09604529, 2003
120. JS Cabral, H Alvelos, "Controlling the Stability of the Decision Process of Wine
Tasting Panellists", accepted for publication in Quality Engineering, May 2003
121. JS Cabral, LM Ribeiro, "A Benchmarking Methodology for the Metalcasting
Industry", accepted for publication in Benchmarking: An Internacional Journal,
December 2003
122. AS Camanho, RG Dyson, "Cost efficiency measurement with price uncertainty: a
DEA application to bank branch assessments", European Journal of Operational
Research, 2003
123. DM Cardoso, JF Sousa, "A numerical tool for multi-attribute ranking problems",
Networks, Vol.41, pp.229-234, 2003
124. A Oliveira, A Palmero, "Numerical Simulation of an Integrated Solar Louvre
Collector System", International Journal of Ambient Energy, Vol.24, Ambient
Press Limited, 2003
125. PM Bluyssen, EO Fernandes, et al., "Why, when and how do HVAC-systems
pollute the indoor environment and what to do about it", Building and Environment,
Vol.38, issue 2, 209-205, February, 2003
126. GVA Silva, MTSD Vasconcelos, AM Santos, EO Fernandes, "Comparison of the
substrate effect on VOC emissions from water based varnish and latex paint",
Environmental Science Pollution Research, Vol.10(4), pp.209-216, 2003
127. Paulo Davim, Pedro Reis, Vitor Lapa, Carlos Alberto Conceição António,
"Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced
(GF30) for applications in structural components", Composite Structures, Vol.62,
pp.67-73, 2003
128. Carlos Alberto Conceição António, Inácio Arnaldo Lhate, "A hybrid crossover
operator for structural optimization based on commonality in genetic search",
Engineering Computations: International Journal for Computer-Aided Engineering
and Software, Vol.20, pp.390-408, 2003
129. PMA Areias, JMA César de Sá, CA Conceição António, "A gradient model for
finite strain elastoplasticity coupled with damage", Finite Elements in Analysis and
Design, The International Journal of Applied Finite Elements and Computer Aided
Engineering, Vol.39, pp.1191-1235, 2003
130. AJM Ferreira, JMAC Sa, AT Marques, "Non-linear finite element analysis of
rubber composite shells", Strength of Materials, Kluwer, Vol.6, pp.225-235, 2003
131. PMA Areias, JMA César de Sá, CA Conceição António, AA Fernandes, "Analysis
of 3D problems using a new enhanced strain hexadreal element", International
Journal for Numerical Methods in Engineering, Vol.58, pp.1637-1682, 2003
195
132. P Ribeiro, "A hierarchical finite element for geometrically non-linear vibration of
doubly curved, moderately thick isotropic shallow shells", International Journal for
Numerical Methods in Engineering, Vol.56, pp.715-738, 2003
133. P Ribeiro, "A hierarchical finite element for geometrically non-linear vibration of
doubly curved, moderately thick isotropic shallow shells", Meccanica, Vol.38, pp.
115-130, 2003
134. Paulo Vila Real, R Cazelli, L Silva, A Santiago, Paulo Piloto, "The Effect of
Residual Stresses in the Lateral-Torsional Buckling of of Steel I-Beams at elevated
Temperature", Journal of Constructional Steel Research, Vol.60, pp.783-793, 2003
135. Paulo Vila Real, Nuno Lopes, L. Simões da Silva, Paulo Piloto, J. M. Fransen,
“Towards a consistent Safety Format of Steel Beam-Columns: Application of the
New Interaction Formulae at Ambient Temperature to elevated Temperatures”,
Steel and Composite Structures an International Journal, Vol.3, pp.383-401, 2003
136. PMST de Castro, "Editorial: current fatigue and fracture research in Portugal",
Fatigue and Fracture of Engineering Materials and Structures, Vol.27, p.743, Sept
2004
137. AB de Morais, CACC Rebelo, P Davies, PMST de Castro, AT Marques,
"Interlaminar fracture studies in Portugal: past, present and future", Fatigue and
Fracture of Engineering Materials and Structures, Vol.27, pp.767-773, Sept 2004
138. PMGP Moreira, PFP de Matos, ST Pinho, SD Pastrama, PP Camanho, PMST de
Castro, "Residual stress intensity factors for cold-worked cracked holes: a technical
note", Fatigue and Fracture of Engineering Materials and Structures, Vol.27,
pp.879-886, Sept 2004
139. PFP de Matos, PMGP Moreira, A Portela, PMST de Castro, "Dual boundary
element analysis of cracked plates: post-processing implementation of the
singularity subtraction technique", Computers and Structures, Vol.82, pp.14431449, July 2004
140. PMST de Castro, AA Fernandes, "Methodologies for failure analysis: a critical
survey", Materials and Design, Vol.25, pp.117-123, 2004
141. JCP Pina, AM Dias, PFP de Matos, PMGP Moreira, PMST de Castro, "Residual
stress analysis near a cold expanded hole in a textured alclad sheet using x-ray
diffraction", Experimental Mechanics, in press, 2004
142. PFP de Matos, PMGP Moreira, JCP Pina, AM Dias, PMST de Castro "Residual
stress effect on fatigue striation spacing in a cold-worked rivet hole", Theoretical
and Applied Fracture Mechanics, in press, 2004
143. RA Fontes Valente, RJ Alves de Sousa, RM Natal Jorge, “An enhanced strain 3D
element for large deformation elastoplastic thin-shell applications”, Computational
Mechanics, Vol.34, pp.38-52, 2004
144. T Mascarenhas, M Pires, E Marques, R Coelho, F Silveira, RM Natal Jorge, C Dias,
M Oliveira, B Patrício, “Birth Trauma: Changes in Pelvic Floor Function”, Progrès
196
en Urologie, Journal de l'Association Française d'Urologie, l'Association des
Urologues du Québec, la Société Belge d'Urologie, Vol.14, pp.27, 2004
145. Lucas F M da Silva, R D Adams, M Gibbs, "Manufacture of adhesive joints and
bulk specimens with high temperature adhesives", International Journal of
Adhesion and Adhesives, Vol.24, pp.69-83, February 2004
146. Abílio MP De Jesus, A Silva Ribeiro, AA Fernandes, "Validation of Procedures for
Fatigue Life Assessment of a Steel Pressure Vessel", Fatigue and Fracture of
Engineering Materials and Structures, Portuguese Special Issue, Vol.27, pp.799810, 2004
147. Luís Miguel Pinho, Francisco Vasques, Andy Wellings, "Replication Management
in Reliable Real-Time Systems", Journal of Real-Time-Systems, Vol.26, pp.261296, Kluwer Academic Publishers, April 2004
148. Maria Teresa Restivo, Fernando Gomes de Almeida, “The use of eddy currents on
the measurement of relative acceleration”, Sensors and Actuators, part A, no. 113,
pp181-188, Elsevier, 2004
149. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Multi-Legged Robot
Modelling and Simulation”, Accepted for publication in Robotica (UK), ISSN
0263-5747
150. Ferreira, J. A., Gomes de Almeida, F., Quintas, M. R., Estima de Oliveira, J. P.,
Hybrid models of hydraulic systems for hardware in the loop, Part 1: Theory.
Accepted for publication in Proc. Inst. Mech. Engrs, Part I: Journal of Systems and
Control Engineering
151. Ferreira, J. A., Gomes de Almeida, F., Quintas, M. R., Estima de Oliveira, J. P.,
Hybrid models of hydraulic systems for hardware in the loop, Part 2:
Experiments. Accepted for publication in Proc. Inst. Mech. Engrs, Part I: Journal
of Systems and Control Engineering
152. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Fractional Order
Control of a Hexapod Robot”, Accepted for publication in Nonlinear Dynamics,
ISSN 0924-090X
153. Afonso Leite, Ana Pereira, Fernando Oliveira, José Nogueira, Joaquim Mendes,
Adélio Mendes, "Sensing Paint Thickness", European Coatings Journal, Vincentz
Network Eds., Jul-Aug, pp.44-48, 2004
154. Borges, J., and M. Levene, "A Dynamic Clustering-Based Markov Model for Web
Usage Mining" submitted for publication in the Data Mining and Knowledge
Discovery journal in May 27, 2004
155. José Borges e Mark Levene, “Ranking pages by topology and popularity within
web sites” submitted for publication in the World Wide Web journal in July 2004
156. José Borges e Mark Levene, “An Average Linear Time Algorithm For Web Usage
Mining”, International Journal of Information Technology & Decision Making,
Vol. 3, No. 2 307-319, 2004
197
157. Lia Patrício, J. Falcão e Cunha, Raymond Fisk, Nuno Jardim Nunes: Customer
experience requirements for multi-platform service interaction: bringing services
marketing to the elicitation of user requirements, in Proceedings of the 12th IEEE
International Requirements Engineering Conference – RE2004, Neil Maiden (Ed.),
Los Alamitos, California: IEEE Computer Society Press; ISBN: 0-7695-2174-6,
ISSN: 1090-705X, pp. 26-35, 2004
158. Henriqueta Nóvoa, Miguel Guimarães, J. Falcão e Cunha: Adoption of e-Business
by an Industrial Manufacturing SME: The ADIRA Case Study, submitted for
publication in the special issue “E-Business in Small Business” of Electronic
Markets - The International Journal of Electronic Commerce and Business Media,
ISSN 1019-6781, 2004-08-31, 2004
159. JS Cabral, A Soeiro, "Engineering Students Assessment at University of Porto
(FEUP)", European Journal of Engineering Education, Vol.29, pp.283-290, 2004
160. JS Cabral, JP Magalhães, D Gonzallez, “The Influence of Genes on the Aging
Process of Mice: A Statistical Assessment of the Genetics pf Aging”, accepted for
publications in Genetics, September 2004
161. AS Camanho, RG Dyson, "Cost efficiency, production and value-added models in
the analysis of bank branch performance", Journal of the Operational Research
Society, in press (accepted in June 2004)
162. JF Sousa, DM Cardoso, "A Multi-attribute Ranking Solutions Confirmation
Procedure", accepted for publication in Annals of Operations Research in July 2004
163. GVA Silva, MTSD Vasconcelos, AM Santos, EO Fernandes, "Effects of
temperature and humidity on VOC emissions from varnish, paint and cork parquet",
Environmental Science Pollution Research, in press
164. A Oliveira, A Palmero, "Testing of an Integrated Solar Louvre Collector",
International Journal of Ambient Energy, Vol.25, Ambient Press Limited, 2004
165. A Oliveira, J Facão, S Varga, "Evaluation of the Use of Artificial Neural Networks
for the Simulation of Hybrid Solar Collectors", International Journal of Green
Energy, Vol.1, Ed. Marcel Dekker, 2004
166. A Oliveira, J Facão, "Heat and Mass Transfer Correlations For the Design of Small
Indirect Contact Cooling Towers", Applied Thermal Engineering, Vol.24,
Pergamon Press, 2004
167. CFA Afonso, "New Advances in Refrigerations Systems for Buildings" accepted
for publication, Applied Thermal Energy, 2004
168. AR Silva, CFA Afonso, "Experiments With a New Prototype for Pratical
Measurements of Duct Airflow by Tracer Gas – Prelimenary Results", accepted for
publication, Energy and Buildings, 2004
169. AR Silva, CFA Afonso, "Experiments with a New Prototype Sensor for Practical
Measurements of Duct Airflow by Tracer Gas – Initial Results", accepted for
publication, Building and Envirionment, 2004
198
170. Paulo Davim, Pedro Reis, Carlos Alberto Conceição António, "A study on milling
of glass fiber reinforced plastics manufactured by hand-lay up using statistical
analysis (ANOVA)", Composite Structures, Vol.64, pp.493-500, 2004
171. Paulo Davim, Pedro Reis, Carlos Alberto Conceição António, "Experimental study
of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up",
Composites Science and Technology, Vol.64, pp.289-297, 2004
172. Catarina Castro, Carlos Alberto Conceição António, Luísa Costa Sousa,
"Optimisation of shape and process parameters in metal forging using genetic
algorithms", Journal of Materials Processing Technology, Vol.146, pp.356-364,
2004
173. Carlos Alberto Conceição António, Catarina Castro, Luísa Costa Sousa,
"Optimization of metal forming processes", Computers and Structures, Vol.82,
pp.1425-1433, 2004
174. P Ribeiro, "Non-linear forced vibrations of thin/thick beams and plates by the finite
element and shooting methods", Computers & Structures, Vol.82, pp.1413-1423,
2004
175. P Ribeiro, "A p-version, first order shear deformation, finite element for
geometrically non-linear vibration of curved beams", International Journal for
Numerical Methods in Engineering (accepted)
176. P Ribeiro, R Carneiro, "Experimental detection of modal interaction in the nonlinear analysis of a hinged-hinged beam", Journal of Sound and Vibration (in press)
177. P Ribeiro, E Manoach, "The effect of temperature on the large amplitude vibrations
of curved beams", Journal of Sound and vibration (accepted)
1.
2.
3.
4.
5.
Joaquim Mendes, Teresa Restivo, "Ensino Laboratorial Integrado com Computação
Gráfica. Uma Aplicação: avaliação da qualidade do corte de chapa", Caderno do
CEFAT, Ano 1, nº1, pp.62-70, 1999
E de Oliveira Fernandes, Ricardo Sá, "Um caso exemplar sobre o impacte da
ventilação na higiene do ambiente interior", Revista Climatização, Maio/Junho
1999
E de Oliveira Fernandes, João Souto, Vasco V dos Santos, "O papel dos filtros na
qualidade do ar dos sistemas avac", Revista Climatização, Novembro/Dezembro
1999
PMM Vila Real, PAG Piloto, JM Franssen, "Modelação Numérica do
Comportamento de uma Estrutura Metálica Sujeita à Acção do Fogo – Análise de
Vários Cenários de Incêndio", accepted for publication on RPEE – Revista
Portuguesa de Engenharia de Estruturas, LNEC, Janeiro de 1999
PMM Vila Real, PAG Piloto, "A Utilização de Métodos Avançados de Cálculo na
Análise Estrutural ao Fogo", INGENIUM – Revista da Ordem dos Engenheiros, 2ª
Série, Nº 41, pp. 70-75, 1999
199
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
AS Ribeiro, AMP de Jesus, "Um Modelo para Previsão da Fase de Iniciação de
Fendas de Fadiga", Revista do Sindicato dos Engenheiros da Região Sul - SERS,
(10), pp.14-19, July 2000
E de Oliveira Fernandes, João Souto, "Filtros como Fontes de Poluição? Alguns
Resultados Experimentais", Revista Climatização, Nº9, Ed. Media Line, 2000
E de Oliveira Fernandes, "O Gás Natural em Portugal: Ajuda à Solução ou
Agravamento do Problema?", Revista Climatização, Nº12, Ed. Media Line, 2000
A Oliveira, C Afonso, "Tecnologias Inovadoras em Sistemas de Ar Condicionado",
Revista Climatização, Ed. Media Line, 2000
PMM Vila Real, PAG Piloto, JM Franssen, "Modelação Numérica do
Comportamento de uma Estrutura Metálica sujeita à Acção do Fogo – Análise de
vários Cenários de Incêndio", Revista Portuguesa de Engenharia de Estruturas,
LNEC, pp. 23-32, 2000
Rogério A Fernandes Martins, "Formulação e Métodos de Resolução de um
Problema de Elasticidade", Ingenium, nº 48, 2000
PP Camanho, FL Matthews, "Simulação da Progressão de Dano e Fractura de
Ligações Aparafusadas em Materiais Compósitos Laminados", Ciência e
Tecnologia dos Materiais, Vol.13, pp.8-14, 2001
A Oliveira, J Matos, C Afonso, "Sistema Híbrido Para a Produção de Electricidade,
Calor e Frio", Revista Climatização, Ed. Media Line, 2001
J Paulo Davim, Vitor Lapa, C Conceição António, "Fresagem de Compósitos de
Matriz Polimérica", TECNOMETAL, Informação Técnico-Científica de Metalurgia
e Metalomecânica, AIMMAP Associação dos Industriais Metalúrgicos,
Metalomecânicos e Afins de Portugal, nº134, Maio/Junho, pp.5-11, 2001
J Paulo Davim, J. Paulo; Lapa, Vitor and António, C. Conceição; “Torneamento de
Compósitos de Matriz Polimérica”, TECNOMETAL, Informação Técnico-Científica
de Metalurgia e Metalomecânica, AIMMAP Associação dos Industriais
Metalúrgicos, Metalomecânicos e Afins de Portugal, nº133, Março/Abril, pp.5-11,
2001
Maria Luisa R Madureira, Francisco Q Melo, "Uma Solução Variacional para
Análise da Deformação de um Tubo de Paredes Finas sob Acção de Forças de
Bordo utilizando Formulação Mista", Revista Portuguesa de Engenharia de
Estruturas, nº48, pp.21-27, 2001
JC Xavier, NM Dourado, JL Morais, C Conceição António, "Identification of
Elastic Properties of Orthotropic Materials Using Evolutionary Algorithms",
MECÂNICA EXPERIMENTAL, Revista da APAET-Associação Portugues de
Análise Experimental de Tensões, nº6, 2001, pp.45-56, 2001
AS Ribeiro, AMP de Jesus, AA Fernandes, "Modelo para previsão do período de
iniciação de fendas de fadiga de componentes estruturais", Ingenium - II Série, nº
70, pp.77-80, October 2002
J Carneiro, A Magalhães, J Duarte, A Rocha, "Modelação e Controlo de uma
Máquina ‘Bulge’", Robótica, Nº 46, 1º Trimestre de 2002
PAG Piloto, PMM Vila Real, "Análise experimental e numérica da Influência das
condições de apoio na encurvadura lateral de vigas metálicas", Revista Mecânica
Experimental, nº7, ISSN 122922, pp.103-112, APAET – Portugal, 2002
200
21. EMM Fonseca, L Mesquita, C Caleiro, H Lopes, M Vaz, "Stresses Concentration
Factors Determination in Plates Using Strain Gauges with Numerical Validation",
(in Portuguese), Journal of APAET - National Association of Experimental Stress
Analysis and Experimental Mechanics, ISSN - 122 922, Vol.nº8, pp. 49-54, 2002
22. Elza MM Fonseca, Carlos AM Oliveira, FQ Melo, "Experimental Validation of a
Theoretic Model for High Temperatures Calculation in Thin Structures", (in
Portuguese), Journal of APAET - National Association of Experimental Stress
Analysis and Experimental Mechanics, ISSN - 122 922, Vol.nº8, pp. 41-48, 2002
23. JF Carneiro, AP Magalhães, FG Almeida, AB Rocha, "MANPRESS: Manipulador
para Alimentação Automática de Prensas", Robótica, No.50, pp 4-7, 2003
24. RAF Martins, "Avaliação de Risco de Incêndio em Edifícios", Revista de
Arquitectura, pp.113-120, May 2003
25. Paulo Davim, Pedro Reis, Vitor Lapa, Carlos Alberto Conceição António,
"Modelização do corte ortogonal em PEEK com e sem reforço de fibras de vidro
através da análise experimental e estatística", Ciência e Tecnologia dos materiais,
Vol.16 nº 1, pp.2-7, 2004
1.
PP Camanho, FL Matthews "Simulação da Progressão de Dano e Rotura de
Ligações Mecânicas em Materiais Compósitos Laminados", Proceedings of
MATCOMP’99- III Congreso Nacional de Materiales Compuestos, pp.411-419,
Málaga, Spain, 1999
2.
FL Matthews, PP Camanho, "Bonded Metallic Inserts for Bolted Joints in FRP",
Proceedings of the Joining and Repair of Plastics and Composites Conference,
London, 1999
3.
AMP de Jesus, A Silva Ribeiro, PMST de Castro, AA Fernandes, "Software
Development for Fatigue Life Prediction of Structural Components", 52nd meeting
of the International Institute of Welding - IIW, doc IIW XII-1801-99, Lisbon,
Portugal, July 18-24, 1999
4.
JMA César de Sá, RM Natal Jorge, LM Costa Sousa, RP Cardoso, "Enhanced
Strain Elements in Adaptive Solutions for Incompressible Forming Processes",
Integrity Reliability Failure, Book of Abstracts, SA Meguid, JF Silva Gomes,
(Editors), pp.22-24, Porto, Portugal, July 19-22, 1999
5.
PP Camanho, RM Guedes, AJM Ferreira, AA Fernandes, "Flexural Behaviour of
Polymer Mortar", Integrity Reliability Failure, Book of Abstracts, SA Meguid, JF
Silva Gomes, (Editors), pp.181-182, Porto, Portugal, July 19-22, 1999
6.
AG Magalhães, AT Marques, PMST de Castro, "Acoustic Emission in the Creep
Characterisation of Adhesive Joints", Integrity Reliability Failure, Book of
Abstracts, SA Meguid, JF Silva Gomes, (Editors), pp.222-223, Porto, Portugal, July
19-22, 1999
7.
LFM Silva, JPM Gonçalves, FMF Oliveira, PMST de Castro, "Laboratory
Simulation of Multiple-Site Damage in Aircraft Using Lap Joint Specimens",
201
Integrity Reliability Failure, Book of Abstracts, SA Meguid, JF Silva Gomes,
(Editors), pp.228, Porto, Portugal, July 19-22, 1999
8.
JMA César de Sá, LM Costa Sousa, RM Natal Jorge, RPR Cardoso, "A
Computational Model for Glass Container Forming Process", European Conference
on Computational Mechanics – Solids, Structures and Coupled Problems in
Engineering, Proc of ECCM’99, Technische Universität München, Germany, Aug
31–Sept 3, 1999
9.
LFM Silva, JPM Gonçalves, FMF Oliveira, PMST de Castro, "Multiple Site
Damage in Riveted Lap-Joint Specimens", Third Joint FAA/DoD/NASA,
Conference on Ageing Aircraft, Albuquerque, New Mexico, USA, Sept 20-23, 1999
10. PP Camanho, AJM Ferreira, "Materiais Compósitos em Engenharia: Futuros
Desenvolvimentos", 1º Congresso Luso-Moçambicano de Engenharia, Vol.1, C.55C.63, Maputo, Moçambique, 1999
11. MV Figueiredo, FMF Oliveira, JP Gonçalves, PMST de Castro, AA Fernandes,
"Fracture Analysis of Forks of an Heavy Duty Lift Truck", International
Conference on Case Histories on Integrity and Failures in Industry, EMAS 1999, V
Bicego et al., (Editors), Milano, Sept 28-Oct 1, pp.643-652,1999
12. AMP de Jesus, A Silva Ribeiro, PMST de Castro, A Portela, AA Fernandes,
"Desenvolvimento de Software para Determinação da Vida à Fadiga de
Componentes Estruturais", XV Congresso Brasileiro de Engenharia Mecânica COBEM 99, Águas de Lindóia, S. Paulo, Brazil, 1999
13. A Silva Ribeiro, JD Moreira da Costa, AA Fernandes, "Fadiga Oligocíclica.
Propriedades Cíclicas da Liga de Alumínio A1 6061-T651", XV Congresso
Brasileiro de Engenharia Mecânica - COBEM 99, Águas de Lindóia, S. Paulo,
Brazil, 1999
14. MV Figueiredo, FMF Oliveira, PMST de Castro, AA Fernandes, "Failure Analysis
of a Shaft Belonging to a Ship Engine Speed Controller", ASME 1999, 1999
International Mechanical Engineering Congress & Exposition, Session DE-11A
“Symposium on Failure Analysis and Prevention, Nashville, USA, in: E C Feldy,
(Editor), “Mechanical Engineering Design Education: Issues and Case Studies”, DE
– Vol.102, pp.97-102, Nov 14-19, 1999
15. Eduardo Tovar, Francisco Vasques, "Using WorldFIP Networks to Support
Periodic and Aperiodic Traffic", in Proceedings of the 25th Annual Conference of
the IEEE Industrial Electronics Society (IECON'99), San Jose, USA, November
29th – December 3rd, 1999
16. Eduardo Tovar, Francisco Vasques, Artur Cardoso, "Guaranteeing DCCS
Timeliness Requirements Using P-NET Fieldbus Networks", in Proceedings of the
7th IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA'99), Barcelona, Spain, 18-22 October, 1999
17. Eduardo Tovar, Francisco Vasques, "Analysis of the Worst-Case Real-Token
Rotation Time in Profibus Networks", in Proceedings of the 3rd International
202
Conference on Fieldbus Systems and their Applications (FET'99), Magdeburg,
Germany, 20-21 September, 1999
18. Eduardo Tovar, Francisco Vasques, "Contributions for the Worst-Case Response
Time Analysis of Real-Time Sporadic Traffic in WorldFIP Networks", in
Proceedings of the WIP session of the 11th Euromicro Conference on Real-Time
Systems (RTS'99), York, England, 9-11 June, 1999
19. Eduardo Tovar, Francisco Vasques, Alan Burns, "Adding Local Priority-Based
Dispatching Mechanisms to P-NET Networks", in Proceedings of the 11th
Euromicro Conference on Real-Time Systems (RTS'99), York, England, 9-11 June,
1999
20. Eduardo Tovar, Francisco Vasques, "Engineering Real-Time Applications with PNET Networks", in Proceedings of the 6th International P-NET Conference,
Vienna, Austria, 25-26 May 1999
21. Eduardo Tovar, Francisco Vasques, "From Task Scheduling in Single Processor
Environments to Message Scheduling in a Profibus Fieldbus Network", in
Proceedings of the 7th International Workshop on Parallel and Distributed RealTime Systems (WPDRTS'99), San Juan, Puerto Rico, 12-13 April 1999
22. Fernando Almeida, António Lopes, Paulo Abreu, "Force-Impedance Control: a new
control strategy of robotic manipulators", presented at the 2nd International
Conference on Recent Advances in Mechatronics (ICRAM’99), Istambul, Turkey,
May 24-26, 1999
23. Henriqueta Nóvoa, J. Falcão e Cunha, António Conde, "AMMNet: an Effective
Model for Deploying Internet Technologies into a Civil Construction SME"; in
Business and Work in the Information Society: New Technologies and Applications,
J-Y Roger, B Stanford-Smith. PT Kidd (eds.), pp.910-916, IOS Press, Amsterdam,
1999
24. Henriqueta Nóvoa, J. Falcão e Cunha, "AMMNet: an Effective Model for
Deploying Internet Technologies into a Civil Construction SME", in EMMSEC'99
(http://www.CheshireHenbury.com/emmsec), European Multimedia, Microprocessor
Systems and Electronic Commerce Conference, Stockholm, Sweden, 21-23 June,
1999
25. AS Matos, JP Sousa, JF Sousa, "Os transportes públicos urbanos de Maputo Questões de regulamentação, propriedade e financiamento", in Proceedings of 1º
Congresso Luso-Moçambicano de Engenharia, Vol. II, Maputo, pp.G 97-106, 1999
26. JM Moreira, JF Sousa, "Performance Indicators Board", in Proceedings of Human
Centered Processes – 10th Mini EURO Conference, Lenca, P., Brest, France,
pp.385-392, 1999
27. JM Moreira, JF Sousa, "Operational Indicators for Public Transport Companies", in
IX Congresso Latino-IberoAmericano de Investigação Operacional, Buenos Aires,
Argentina, 1999
28. J Falcão e Cunha, Jeremy V Pitt, Teresa Galvão Dias, J Pinho de Sousa, "Intelligent
Software Agents for Supporting Roles in Operational Transport Planning", in
203
J-Y Roger, B Stanford-Smith, PT Kidd (eds.), IOS Press, Amsterdam, xiv+942 pp.,
ISBN: 90-5199-491-5, pp.257-263, 1999
29. Teresa Cunha Barros, Dinis Mota Paes, J Falcão e Cunha, Gabriel David,
"INFOBUS: Public Transport Information on the World Wide Web", in Business
and Work in the Information Society: New Technologies and Applications, J-Y
Roger, B Stanford-Smith, PT Kidd (eds.), IOS Press, Amsterdam, 1999, xiv+942
pp., ISBN: 90-5199-491-5, pp. 475-481, 1999
30.
Henriqueta Nóvoa, J. Falcão e Cunha, António Conde, "AMMNet: an Effective
Model for Deploying Internet Technologies into a Civil Construction SME", in
J-Y Roger, B Stanford-Smith, PT Kidd (eds.), IOS Press, Amsterdam, 1999,
xiv+942 pp., ISBN: 90-5199-491-5, pp. 910-916, 1999
31. JS Cabral, H Alvelos, A Rosas, P Barros, "Contributions for the Calibration of the
Tasting Panel of the Port Wine Institute", Proceedings of the XXIV World Congress
on the Vine and Wine, Secção. II - vol 1: Oenology faced with market requirements,
pp.218-225, 1999
32. JS Cabral, S Rocha, I Delgadillo, P Barros, H Alvelos, "Characterising Different
Types of Port Wine Using an Electronic Aroma Sensing Equipment and Chemical
and Colour Analyses", Proceedings of the XXIV World Congress on the Vine and
Wine, Secção. II - Vol 2: Oenology faced with market requirements, pp.217-224,
1999
33. AS Camanho, RG Dyson, "Efficiency Analysis of Bank Branch Networks: A
Regional Comparison", 5th International Conference of the Decision Sciences
Institute, D.S.I. ' 99, Atenas, Greece, 4-7 June, 1999
34. Philomena M Bluyssen, E de Oliveira Fernandes, JL Molina, "SOPHIE, a european
data base on indoor air pollution sources: marketing and organi-sational matters",
Indoor Air 99, Edinburgh, Scotland, Vol.4 pp.707-712, 1999
35. E de Oliveira Fernandes, PM Bluyssen, G Clausen , K Saarela, S Kirchner, JL
Molina, W Bischoff, HN Knudsen, "MATHIS – Materials for healtiiy indoor spaces
and more energy efficient buildings", Indoor Air 99, Edinburgh, Scotland, Vol.4
pp.628-633, 1999
36. Philomena M Buyssen, M Bjorkroth, B Muller, E de Oliveira Fernandes, G
Clausen, J Molina, C-A Roulet, "AIRLESS, A European project on hvac systems:
project programme and current status", Indoor Air 99, Edinburgh, Scotland, Vol.1
pp.558-563, 1999
37. GVA Silva, MT Vasconcelos, EO Fernandes, AMS Santos, "The effect of substrate
on volatile organic compounds emissions from a varnish", Indoor Air 99,
Edinburgh, Scotland, Vol.1 pp.493-498, 1999
38. E de Oliveira Fernandes, "Solar energy in the built environment: the building as a
system plus the systems in the building", ISES Solar World Congress, Jerusalém,
July 4-9, 1999
204
39. E de Oliveira Fernandes, "Energia e ambiente: novas perspectivas para o
desenvolvimento", Proceedings do 1º Congresso Luso-Moçambicano de
Engenharia, CLME’99, Maputo, 14-16, Vol.I, pp.9-15, September 1999
40. C Afonso, A Oliveira, "Desiccant cooling cycles for air conditioning", (in
portuguese), Proceedings Congresso Luso-Moçambicano de Engenharia, 1999
41. A Oliveira, C Afonso, "Solar Chimneys For Natural Ventilation In Buildings, (in
portuguese), Proceedings Congresso Luso-Moçambicano de Engenharia, 1999
42. AJM Ferreira, AT Marques, JC Sá, AA Fernandes, "Analysis of RC beams
reinforced with FRP Re-bars by finite elements", International Conference on
Integrity, Reliability and Failure, Porto, Portugal, July, 1999
43. AJM Ferreira, AT Marques, JC Sá, "Modelling of honeycomb structures by the
finite element method", International Conference on Integrity, Reliability and
Failure, Porto, Portugal, July, 1999
44. CF Castro, L Costa Sousa, CA Conceição António, J César de Sá, "Bulk forming
processes: formulation and development of a sensitivity analysis model",
Proceedings of 2nd Esaform Conference on Material Forming, Guimarães, Portugal,
ed. JA Covas, pp.493-496, 15-19 April 1999
45. AJ Mendes Ferreira, J Trigo Barbosa, "Buckling Behaviour of Composite Shells",
IRF’99 - An International Conference on Integrity, Reliability and Failure,
Universidade do Porto, Porto, Portugal, 19-22 July 1999
46. J Trigo Barbosa, Lúcia S Dinis, "Non-Linear Analysis of Reinforced Shell
Structures", IRF’99 - An International Conference on Integrity, Reliability and
Failure, Universidade do Porto, Porto, Portugal, 19-22 de Julho de 1999
47. CA Conceição António, J Paulo Davim, "Optimização das condições de corte em
maquinagem usando um modelo numérico-experimental", Actas do 1º Congresso
Luso-Moçambicano de Engenharia, Maputo-Moçambique, Editores: JF Silva
Gomes, António Matos, Clito Afonso, Vol.1, pp.C131-C137, 14-16 Setember,1999
48. CA Conceição António, PMA Areias, "Optimização da resposta dinâmica de placas
e cascas baseada em programação quadrática sequencial (SQP)", Actas do 1º
Congresso Luso-Moçambicano de Engenharia, Maputo-Moçambique, Editores: JF
Silva Gomes, António Matos e Clito Afonso, Vol. 1, pp.C65-C75, 14-16 Setember
1999
49. CA Conceição António, "Reliability based optimal design of geometrically nonlinear composite structures", Proceedings of IRF-Integrity, Reliability and Failure,
an International Conference, Porto, Edited by SA Meguid (University of Toronto)
and JF Silva Gomes (University of Porto), pp.266-267, July 19-22, 1999
50. CAC António, JT Barbosa, "Optimal design of stiffened composite structures under
buckling loads: an inverse approach", Proceedings of IRF-Integrity, Reliability and
Failure, an International Conference, Porto, Edited by SA Meguid (University of
Toronto) and JF Silva Gomes (University of Porto), pp.61, July 19-22,1999
205
51. P Ribeiro, M Petyt, "Multi-modal geometrical non-linear forced vibration of
composite plates by the hierarchical finite element and harmonic balance methods",
In Proceedings of the Sixth International Congress on Sound and Vibration, ed. by
Finn Jacobsen, Vol.7, pp.3223-3230, 5-8 July, 1999
52.
P Ribeiro, M Petyt, "Geometrical non-linear forced vibration of fully clamped plates
with internal resonance", In Book of abstracts of the 1999 ASME mechanics and
Materials Conference, ed. by RC Batra, EG Henneke, 451, 27-30 June, 1999
53. P Ribeiro, M Petyt, "Geometrical non-linear multi-modal vibration of fully clamped
isotropic plates", Proceedings of the International Conference Eurodyn 99, ed. by
L Frýba, J Náprstek, Vol.1, pp.325-330, Rotterdam: Balkema, 1999
54. CF Castro, LC Sousa, CC António, JM César de Sá, "Bulk Forming Processes:
Formulation and Development of a Sensitivity Analysis Model", 2nd ESAFORM
Conference, Guimarães, pp493-496, 15-19 April, 1999
55. CF Castro, LC Sousa, CC António, JM César de Sá, "Optimal Design of Metal
Forming Process Parameters", Book of Abstracts of the First International
Conference on Integrity, Reliability and Failure, Universidade do Porto, ed. SA
Meguid, JF Silva Gomes, June 19-22, 1999
56. LC Sousa, JM Ferreira, "Modelling of the Cracked Sandwich", Book of Abstracts
of the First International Conference on Integrity, Reliability and Failure,
Universidade do Porto, ed. SA Meguid, JF Silva Gomes, June 19-22, 1999
57. LC Sousa, JM César de Sá, FM Pires, "Simulation model for hot forming with
adaptive mesh refinement", Book of Abstracts of the first International Conference
on Integrity, Reliability and Failure, Universidade do Porto, ed. SA Meguid, JF
Silva Gomes, June 19-22, 1999
58. Elza MM Fonseca, Paulo MM Vila Real, "Finite Element Modelling of ThermoElastoplastic Behaviour of Hot-Rolled Steel Profiles Submitted to Fire", IV
Congresso de Métodos Numéricos en Ingeniería, R Abascal, J Domínguez y G
Bugeda (Eds.), SEMNI - Sociedad Española de Métodos Numéricos en Ingeniería,
Escuela Superior de Ingenieros de Sevilla, Espanhã, 7-10 Junho, 1999
59. Elza MM Fonseca, Paulo FP Matos, "Análise Estrutural de Um Pavilhão em
Construção Metálica", 2ª conferencia de usuarios Cosmos/M para España y
Portugal, Bilbao, Spain, June, 1999
60. Elza MM Fonseca, Carlos AM Oliveira, "Análise Térmica de uma União Tubular
Sujeita a Elevados Gradientes Térmicos", 2ª conferencia de usuarios Cosmos/M
para España y Portugal, Bilbao, Spain, June, 1999
61. PP Camanho, MC Fernandes, AA Fernandes, AJM Ferreira, MAV Figueiredo,
"Higly Durable Precast Special Concrete", EUROMAT 99 Proceedings vol.6
“Materials for Buildings and Structures”, FH Wittmann, (Editors), München,
Germany, Sept 27-30, Wiley-VCH, pp.41-46, 2000
62. AJM Ferreira, PP Camanho, "Modelling of Reinforced Concrete with FRP Rebars",
3rd International Conference on Mechanics and Materials in Design (M2D), Book
of Abstracts, AS Meguid, (Editor), pp.178, Orlando, USA, May 29-31, 2000
206
63. JMA César de Sá, PMA Areias, RM Natal Jorge, "New Quadrilateral Elements for
Finite Elastoplastic Deformation", 3rd International Conference on Mechanics and
Materials in Design (M2D), Book of Abstracts, AS Meguid, (Editor), pp.188,
Orlando, USA, May 29-31, 2000
64. CML Tavares, MC Ribeiro, M Figueiredo, AJM Ferreira, AA Fernandes,
"Influence of Material Parameters in the Mechanical Behaviour of Polymer
Concrete", 3rd International Conference on Mechanics and Materials in Design
(M2D), Book of Abstracts, AS Meguid, (Editor), pp.239-240, Orlando, USA, May
29-31, 2000
65. JMA César de Sá, PMA Areias, RM Natal Jorge, "Analisys of Large Elasto-Plastic
Deformation With New Compatible Mode Elements", ECCOMAS 2000, European
Congress on Computational Methods in Applied Sciences and Engineering,
Barcelona, Spain, Sept 11-14, 2000
66. AJM Ferreira, AA Fernandes, "A Review of Numerical Methods for the Analysis of
Composite and Sandwich Structures", Multimaterials Technologies – Solutions and
Opportunities, conference based on the DOGMA - Design Optimization and
Guidelines for Multimaterial Applications project (European Commision Thematic
Network project BET2-530), Utrecht, pp.69-74, Oct 24-25, 2000
67. T Novais Barbosa, FMF Oliveira, PMST de Castro, AA Fernandes, "Cracked Stone
Crusher: Failure Analysis and Repair", 2000 ASME International Mechanical
Engineering Congress and Exhibition, ASME paper 2000-IMECE/DE-6, Orlando,
FL, Nov 5-10, 2000
68. AT Marques, JF Silva, A Balacó de Morais, PMST de Castro, "Fracture Mechanics
Concepts and Structural Integrity of Filament Wound Pipes", 13th European
Conference on Fracture ECF13, M Fuentes et al., (Editors), San Sebastian, Spain,
“Fracture Mechanics: Application and Challenges”, ESIS pub.26, Elsevier, pp.253261 Sept 6-9, 2000
69. PP Camanho, FL Matthews, "Bonded Inserts for CFRP Bolted Joints", Proceedings
of the European Conference on Spacecraft Structures, Materials and Mechanical
Testing, Noordwijk, The Netherlands, ESA SP-468, pp.207-212, Nov 29-Dec 1,
2000
70. LM Teixeira, PP Camanho, AA Fernandes, "Static and Fatigue Behaviour of
Aluminium Bonded Joints", Proceedings of the European Conference on
Spacecraft Structures, Materials and Mechanical Testing, Noordwijk, The
Netherlands, ESA SP-468, pp.547-551, Nov 29-Dec 1, 2000
71. FJMQ de Melo, "An hybrid solution for a classical problem: The von Karman
solution for the in-plane bending of curved pipes – a technical note", presented at
DOGMA - Design Optimization and Guidelines for Multimaterial Applications,
(European Commision Thematic Network project BET2-530) meeting, Porto,
Portugal, Edited version published in: AJM Ferreira, AA Fernandes, AT Marques,
(Editors), “Modelling of sandwich structures and adhesive bonded joints”, Edições
FEUP, pp.119-130, Sept 17-18, 2000
207
72. Eduardo Tovar, Francisco Vasques, “Non Pre-emptive Scheduling of Messages on
SMTV Token-Passing Networks”, in Proceedings of the 12th Euromicro
Conference on Real-Time Systems (RTS'2000), Stockholm, Sweden, 19-21, pp.
209-218, June 2000
73. Luís Miguel Pinho, Francisco Vasques, Eduardo Tovar, “Integrating Inaccessibility
in Response Time Analysis of CAN Networks”, in Proceedings of the 3rd IEEE
International Workshop on Factory Communication Systems (WFCS 2000), Porto,
Portugal, pp.77-84, 6-8 September 2000
74. Eduardo Tovar, Francisco Vasques, “Engineering Real-Time Applications with
WorldFIP Networks: Analysis and Tools”, in Proceedings of the 4th IFAC Int.
Symposium on Intelligent Components and Instruments for Control Applications
(SICICA 2000), Buenos Aires, Argentina, 13–15 September 2000
75. Luís Miguel Pinho, Francisco Vasques, Luís Ferreira, “Programming Atomic
Multicasts in CAN”, in Proceedings of the 10th International Real-Time Ada
Workshop (IRTAW-2000), Ávila, Spain, 18-22 September 2000
76. Fernando Almeida, António Lopes, Paulo Abreu, “Force-Impedance Control of
Robotic Manipulators”, Proc. of the 4th Portuguese Conference on Automatic
Control, Guimarães, Portugal, 4-6 October 2000
77. Costa, C. and Magalhães, A. P. – “Experimental Deduction of Real-time
Scheduling Models” Proc. of the 4th Portuguese Conference on Automatic Control,
Guimarães, Portugal, 4-6 October 2000
78. Luís Miguel Pinho, Francisco Vasques, “An Architecture for Reliable Distributed
Computer-Controlled Systems”, in Proceedings of the Int. IFIP Workshop on
Distributed and Parallel Embedded Systems (DIPES 2000), Paderborn, Germany,
18-19 October 2000
79. Salvatore Monforte, Mário Alves, Eduardo Tovar, Francisco Vasques, “Designing
Real-Time Systems Based on Mono-Master Profibus-DP Networks”, in
Proceedings of the 16th IFAC Workshop on Distributed Computer Control
Systems, Sidney, Australia, 29 November - 1 December 2000
80. Paulo Veríssimo, António Casimiro, Luís Miguel Pinho, Francisco Vasques,
“Distributed Computer-Controlled Systems: the DEAR-COTS Approach”, in
Proceedings of the 16th IFAC Workshop on Distributed Computer Control
Systems, Sidney, Australia, 29 November - 1 December 2000
81. Borges, J., and M. Levene, "A Heuristic to Capture Longer User Web Navigation
Patterns", in Proceedings of the 1st International Conference on Electronic
Commerce and Web Technologies (EC-Web 2000), Lecture Notes in Computer
Science, Vol. 1875, Springer-Verlag, Berlim, pp. 155-164, 2000
82. Mark Levene, José Borges and Richard Wheeldon, "A Fine-Grained Heuristic to
capture web navigation patterns", in www workshop on web measurement, metrics
and mathematical models, Amsterdam, 2000
208
83. Cardoso, D.M. and J.F.Sousa, “Validation in Alternative Selection Problems – Part
I: Tools from Combinatorics and Graph Theory”, 4th International Conference on
Operations Research, Havana – Cuba, Março de 2000
84. Sousa, J.F. and D.M.Cardoso,” Validation in Alternative Selection Problems – Part
II: Analysis of an Application in the Acquisition of Urban Buses”, 4th International
Conference on Operations Research, Havana – Cuba, Março de 2000
85.
Jorge Pinho de Sousa, João Falcão e Cunha, Jorge Freire de Sousa: Transport
Operational Planning – the GIST Case Study, in Improving Knowledge and Tools
for Transportation and Logistics Development, M. Bielli e P. Carotenuto (Eds.),
Roma, pp. 501-508, 2000
86. JS Cabral, H Alvelos, P Barros, “Third-Party Assessment of the Tasting Panel of
the Port Wine Institute”, Proceedings of the 44th Congress of the European
Organization for Quality, Budapest, vol. S, pp. 210-217, 2000
87. JS Cabral, H Alvelos, B Amaral, “Assessing the Global Performance of The
Members of a Wine Tasting Panel”, Proceedings of the XXV World Congress on the
Vine and Wine, Section II, pp. 373-378, Paris, 2000
88. E de Oliveira Fernandes, “Energy Use and Links with Air Quality”, Workshop on
Urban Air, Indoor Environment and Human Exposure, Thessaloniki, EUR 19646
EN, April 2000
89. Philomena M Bluysen, E de Oliveira Fernandes, JL Molina, "Database for Sources
of Pollution for Healthy and Comfortable Indoor Environment (SOPHIE): Status
2000", Proceedings Healthy Buildings 2000, Vol.4, Espoo, Finland, 2000
90. Philomena M Bluyssen, M Bjorkroth, B Muller, E de Oliveira Fernandes, C-A
Roulet, "Why, When and How do HVAC-Systems Pollute? Characterisation of
HVAC Systems Related Pollution", Proceedings Healthy Buildings 2000, Vol.2,
Espoo, Finland, 2000
91. João N Souto, E de Oliveira Fernandes, "HVAC Filters as Pollution Sources:
Results of Experimental Tests and Lessons for Practice", Proceedings Healthy
Buildings 2000, Vol.2, Espoo, Finland, 2000
92. Eduardo de Oliveira Fernandes, Francisco J de Almeida. "Solar Energy in the
Urban Planning Process: New Opportunities and New Tools, The City - A Solar
Power Station", Sixth European Conference Solar Energy in Architecture and
Urban Planning, Eurosolar, Bonn, Germany, 2000
93. G Guerassimoff, L Fulcheri, E Maldonado, M Borges, JL Alexandre, R Bonfils, D
Lagnie, L Perez-Lombard, D Velazquez-Alonso, “Régulateur flou pour la gestion
optimisée des systèmes de climatisation par stockage de glace”, Workshop de
Lógique Floue, Sophia-Antipolis, March 2000
94. A Oliveira, et al., "An Ecological Cooling System Using Chilled Ceilings and
Closed Wet Cooling Towers", ROOMVENT 2000, UK, 2000
95. L Braga, C Afonso, "Exergetic Analysis of a Natural Gas Cogen Plant in a Sugar
Refinery in Oporto – Portugal", International Conference on Efficiency, Cost
209
Optimisation, Simulation and Environmental Aspect of Energy and Process System
– ECOS 2000, Enschede, Holland, 2000
96. K Sirén, et al., "Combining Light Pipe and Stack Ventilation – Some Development
Aspects", World Renewable Energy Network Congress, Brighton, UK, 2000
97. S Varga, A Oliveira, "Numerical Simulation of Different Ventilation Terminals for
Use With Light Pipes in Buildings Using Ansys5.5/Flotran", Proceedings Ansys
Conference, ANSYS USA, 2000
98. K Sirén, T Helenius, L Shao, B Ford, A Oliveira, S Varga, J Borth, E Zaccheddu
"Combining Light Pipe and Stack Ventilation – Some Development Aspects",
Proceedings World Renewable Energy Congress, WREC2000, 2000
99. A Oliveira, J Facão, C Afonso, P Sprecher, J Borth, K Sirén, A Hasan, M Suokas, R
Niessen, S Riffat, G Gan, L Shao, "Chilled Ceilings: An Ecological Cooling System
Using Closed Wet Cooling Towers", Proceedings Roomvent 2000, Elsevier Science,
2000
100. Piloto, P. A. G.; Vila Real, P. M. M., “Encurvadura Lateral de Vigas Submetidas a
Elevadas Temperaturas – Comparação Numérica”, Comunicação apresentada na 3ª
Conferência Anual de Usuários COSMOS/M para España e Portugal, 29 de
Setembro de 2000
101. C. A. Conceição António, "An approach to reliability based on design of composite
structure under dynamic response", ECCOMAS 2000 – European Congress on
Computational Methods in Applied Sciences and Engineering, Barcelona, Espanha,
11-14 Setembro 2000
102. Catarina F. Castro, Luisa Costa Sousa, C. A. Conceição António, J. César de Sá, “A
Multilevel Approach to Optimization of Bulk Forming Processes”, ECCOMAS
2000 - European Congress on Computational Methods in Applied Sciences and
Engineering, incorporating the VI International Conference on Computational
Plasticity (COMPLAS VI), Barcelona, Spain, Book of abstracts and CD-Rom
Proceedings, Editor: E. Oñate, CIMNE International Center for Numerical Methods
in Engineering, 12 páginas, ISBN 84-89925-70-4, 2000
103. Mesquita, Luís; Fonseca, Elza M. M., Castro, Gil, “Análise Estrutural de Um
Veiculo Motorizado para Deficiente Motor”, ‘3ª conferencia de usuarios Cosmos/M
para España y Portugal’, Bilbao, Espanha, Setembro 2000
104. P. Ribeiro, “Non-linear dynamic analysis of beams and frames in the time domain
by the hierarchical finite element method”, Proceedings of the International
Conference Leuven, Belgium, September 2000
105. P. Ribeiro, J. Marinho and L. Alves., “Experimental investigation on the ocurrence
of internal resonances in a clamped-clamped beam”, Proceedings of the 7th
International Conference - Structural Dynamics: Recent Advances. Southampton,
England, ed. by N.S. Ferguson, H.F. Wolfe, M.A. Ferman and S.A. Rizzi, 365-378,
July 2000
106. P. Ribeiro, “Even harmonics on the steady-state geometrical, non-linear forced
vibration of beams”, Proceedings of the 7th International Conference - Structural
210
Dynamics: Recent Advances. Southampton, England, ed. by N.S. Ferguson, H.F.
Wolfe, M.A. Ferman and S.A. Rizzi, 365-378, July 2000
107. Piloto, P. A. G.; Vila Real, P. M. M., “Lateral Torsional Buckling of Steell I-Beams
in Case of Fire: Experimental Evaluation”, Proceedings 1st International Workshop
of Structures in Fire, Danish Institute of Fire Technology, Copenhaga, Dinamarca,
pp. 95-104, 19-20 Junho 2000
108. António, C.A.C. e Davim, J. P., “Optimization of turning conditions using surface
finish experimental data and genetic search”, Mechanics & Materials in Design
2000 - 3rd International Conference, Orlando, Florida (USA), 29-31 Maio, Editor:
S.A. Meguid, Engineering Mechanics and Design Laboratory, University of
Toronto, Canada, pp. 243-245, ISBN 0-7727-4803-9, 2000
109. Piloto, P. A. G.; Vila Real, P. M. M.; Franssen, J.M., “A simple model for lateral
Torsional Buckling Resistance of Stell I-Beams Under Fire Conditions –
Comparison with Experimental Results”, Experimental Mechanics in Design Mechanics & Materials in Design (M2D), 3rd International Conference, Orlando,
Florida, USA, 29-31 May 2000
110. JPM Gonçalves, MFSF de Moura, PMST de Castro, AT Marques, "Modeling
Damage Propagation In Interfaces Considering Mode I, Mode II and Mixed Mode
Loading Conditions", 6th International Conference on Biaxial/Multiaxial Fatigue
and Fracture, 6th ICB/MF&F, ESIS, Lisbon, Portugal, Vol.2, pp.613-621, June 2528, 2001
111. J Sabino Domingues, A Portela, PMST de Castro, "Mixed Mode Stress Intensity
Factor Determination Using Trefftz Complex Functions", 6th International
Conference Biaxial/Multiaxial Fatigue and Fracture, 6th ICB/MF&F, ESIS,
Lisbon, Vol.2, pp.709-718, June 25-28, 2001
112. AMP de Jesus, AS Ribeiro, AA Fernandes, "Code Based Life Prediction of a
Pressure Vessel and its Validation", 6th International Conference on
Biaxial/Multiaxial Fatigue and Fracture, 6th ICB/MF&F, ESIS, Lisbon, Portugal,
Vol.1, pp.363-370, June 25-28, 2001
113. JMA César de Sá, PMA Areias, RM Natal Jorge, RAF Valente, "Techniques for the
Analysis of Metalworking Processes Using Enhanced-Strain Elements", in
Simulation of Materials Processing: Theory, Methods and Applications, Proc. of
7th Int. Conf. on Num. Meth. in Ind. Forming Processes, NUMIFORM 2001, K
Mori, (Editor), Toyohashi University of Technology, Japan, pp.155-160, 2001
114. C Dávila, PP Camanho, MFSF de Moura, "Mixed-Mode Decohesion Elements for
Analyses of Progressive Delamination", Proceedings of the 42nd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials
Conference, Seattle, Washington, April 16-19, 2001
115. MRA Castro, AT Marques, PP Camanho, "Design and Quality Control of
Structures Made With Pultruded Profile", Composites in Construction, Proceedings
of the International Conference CCC2001, J Figueiras, L Juvandes, R Faria, A T
Marques, A Ferreira, J Barros, J Appleton, (Editors), Porto, Portugal, ISBN 90 5809
260 7, pp.439-443, 10-12 Oct, 2001
211
116. C Dávila, PP Camanho, MFSF de Moura, "Progressive Damage Analyses of
Stringer/Stringer Debonding", Proceedings of the 16th American Society for
Composites Technical Conference, Blacksburg, Virginia, September, 2001
117. C Dávila, PP Camanho, "Decohesion Elements using Two- and Three-Parameter
Mixed-Mode Criteria", American Helicopter Society International Specialists’
Meeting, Williamsburg, VA, Oct 30-Nov 1, 2001
118. PP Camanho, MFSF de Moura, "Simulation of Interlaminar Damage Using
Decohesion Elements", Proceedings of the 13th International Conference on
Composite Materials, Beijing, China, June 2001
119. A Silva Ribeiro, AMP de Jesus, AA Fernandes, "Vida à Fadiga de Juntas
Cruciformes Soldadas com Transferência de Carga", XVI Congresso Brasileiro de
Engenharia Mecânica - COBEM 2001, Uberlândia, November 2001
120. AMP de Jesus, A Silva Ribeiro, AA Fernandes, "Numerical and Experimental
Fatigue Analysis of a Pressure Vessel", XVI Congresso Brasileiro de Engenharia
Mecânica - COBEM 2001, Uberlândia, November 2001
121. JAO Carneiro, JT Pereira, AJ Rocha, FJMQ de Melo, "Structural validation of
motor vehicle eeats by pseudodynamic analysis", Proceedings of Automotive and
Transportation Technology Congress and Exhibition – ATTCE2001, SAE,
Barcelona, Vol.1: Safety, pp.199–205, Oct 1-3, 2001
122. AJM Ferreira, PP Camanho, AA Fernnades, "A Numerical Model for the Analysis
of Reinforced Concrete with Polymer Matrix Composite Re-bars", Int Congress on
Polymers in Concrete, Hawaii, 2001
123. P Bamforth, AJM Ferreira, AA Fernandes, "Probabilistic approach for predicting
life cycle costs and performance of buildings and civil infrastructures", Internet
Business and the Industry of Construction, Vila da Feira, Portugal, J Falcão e
Cunha, H Sampaio Nóvoa, NJ Nunes, AP Mesquita, (Editors), FEUPedições, pp.3740, 2001
124. ST Pinho, C Novo, A Nicolau, A Vieira, N Correia, A Torres Marques;
"Permeability Tests of Carbon Fibre Preforms", MATERIAIS 2001, Proceedings of
the 1st International Materials Symposium, Coimbra, Portugal, 2001
125. ST Pinho, A Nicolau, P Vieira, AT Marques, P Oliveira, R Pereira, "Design and
Manufacture of a Fin-Box Made by RTM", Proceedings of the 8th International
Conference on Composites Engineering, Tenerife, Spain, 2001
126. ST Pinho, A Nicolau, P Vieira, AT Marques, P Oliveira, "Concept Analysis of a
Fin-Box Made by RTM", Congreso Nacional de Materiales Compuestos
MATCOMP’01 IV, Gijón, Spain, Nov 21–23, 2001
127. Luís Miguel Pinho, Francisco Vasques, “Merging Reliability and Timeliness
Requirements in Distributed Computer-Controlled Systems”, 9th International
Conference on Real-Time Systems (RTS’01), Paris, France, 6-8 March 2001
212
128. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2001, “Performance
Analysis of Periodic Gaits in Multi-Legged Locomotion”, ICAR’01 - IEEE
International Conference on Advanced Robotics, Budapest, Hungary, 2001
129. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2001, “Energy
Analysis of Multi-Legged Locomotion Systems”, 4th Int. Conference on Climbing
and Walking Robots, CLAWAR 2001, Karlsruhe, Germany, 2001
130. Mário Alves, Eduardo Tovar, Francisco Vasques, “Evaluating the Duration of
Message Transactions in Broadcast Wired/Wireless Fieldbus Networks”, in
Proceedings of the 4th IFAC Conference on Fieldbus Systems and their
Applications (FeT’2001), Nancy, France, November 2001
131. Mário Alves, Eduardo Tovar, Francisco Vasques, “On the Adaptation of Broadcast
Transactions in Token-Passing Fieldbus Networks with Heterogeneous
Transmission Media”, in Proceedings of the 8th IEEE International Conference on
Emerging Technologies and Factory Automation (ETFA'01), Antibes, France,
October 2001
132. Luís Miguel Pinho, Francisco Vasques, “Timing Analysis of Reliable Real-Time
Communication in CAN Networks”, in Proceedings of the 13th Euromicro
Conference on Real-Time Systems (ECRTS-2001), Delft, Netherlands, July 2001
133. Luís Miguel Pinho, Francisco Vasques, “Reliable Communication in Distributed
Computer-Controlled Systems”, in Proceedings of the 6th Int. Conference on
Reliable Software Technologies (Ada-Europe'2001), Leuven, Belgium, pp.136-147,
Mai 2001
134. Luís Miguel Pinho, Francisco Vasques, “Merging Reliability and Timeliness
Requirements in Distributed Computer-Controlled Systems”, in Proceedings of the
9th Int. Conference on Real-Time Systems (RTS’2001), Paris, France, March 2001
135. Falcão e Cunha, António Amador, Henriqueta Nóvoa, Ana Correia, João Carvalho,
António Lima, António Conde: Internet Procurement for Products and Services in
the Construction and Engineering Industry – the need for European Standardisation;
in E-work and E-commerce: Novel solutions and practices for a global networked
economy, B. Stanford-Smith and Enrica Chiozza (eds.), pp. 956-962, IOS Press,
Amsterdam, 2001
136. Henriqueta Nóvoa, António Amador, J. Falcão e Cunha: Deployment of Internet
Technologies in a Civil Construction SME and Assessment of its Impact; apres.:
IBIC 2001 – Internet Business and the Industry of Construction, Europarque, Porto,
2001.11.15-16, 2001
137. Gaudêncio Freires, J. Falcão e Cunha, Henriqueta Nóvoa: A Draft Plan to help
SMEs to Adopt Standards in their Internet Business Activities; apres.: IBIC 2001 –
Internet Business and the Industry of Construction, Europarque, Porto, 2001.11.1516, 2001
138. Matos, A. S., J. P. Sousa and J. F. Sousa, "Alguns contributos para o apoio ao
planeamento de uma rede de transportes públicos urbanos", in Proceedings of 2º
213
Congresso Luso-Moçambicano de Engenharia, Gomes, J. S., C. F. Afonso, C. C.
António e A. S. Matos (Eds.), pp. G1-11, 2001
139. Silva, J.R. and J.F.Sousa, “A Decision Support System for Vehicle Replacement”,
12th Meeting of the EURO Working Group on Decision Support Systems, CascaisPortugal, 18-20 Maio 2001
140. T. Galvão Dias, J. Pinho de Sousa, J. Falcão e Cunha: A Hybrid Genetic Algorithm
for the Bus Driver Scheduling Problem, in Proceedings of MIC’2001 - 4th
Metaheuristics International Conference (Volume 1), J. Pinho de Sousa (ed.),
Porto, 2001, pp. 35-40, 2001
141.
A Buchtova, G Ventura, A Martins, I ©urina, S Katuscak, "Determination of
VOC with FLEC (Field and Laboratory Emission Cell)-alternative for chamber
method", Int.Conference.:Pulp and Paper - Technology, Properties, Environment,
Bratislava, SR. ISBN 80-227-1566-2, 2001
142. A Oliveira, C Afonso, J Matos, S Riffat, M Nguyen, P Doherty, "A Combined Heat
and Power System for Buildings Driven by Solar Energy and Gas", Proceedings
HPC-2001 Conference, CNAM, Paris, 2001
143. Cardoso, R.P.R.; Yoon, J.W.; Grácio, J.J.; Barlat, F. and César de Sá, J.M.A.;
“Development of one point quadrature shell element for large deformation
considering elasto-plastic material modeling”, Proceedings of the 7th International
Conference on Numerical Methods in Industrial Forming Processes – NUMIFORM
2001, Toyohashi, Japan, 18-20 June 2001, ed. Ken-ichiro Mori, A.A.Balkema,
pp.145-150, 2001
144. António, C.A.Conceição and Davim, J. Paulo; “Improvements on Dry Drilling
Conditions”, 2º Congresso Luso-Moçambicano de Engenharia, Maputo,
Moçambique, 3-6 Setembro, pp.D1-D6, 2001
145. MH Barros, CM Mota Soares, RAFMartins, "A Model for Elastic Degradation and
Damage in Concrete Under Compression Loads", Eighth Annual International
Conference on Composites Engineering, Tenerife, Spain, 2001
146. Cazeli, Ronisi; Vila Real, P.M.M.; Silva, Valdir P. and Piloto, P.A.G.; “Análise
Numérica de Vigas I de Aço em Situação de Incêndio, Sujeitas à Flambagem
Lateral. Contribuição para a validação de uma Proposta de Revisão do Eurocode 3Parte 1.2”, I Congresso Internacional da Construção Metálica – I CICOM, São
Paulo, Brasil, 6 a 9 de Novembro, 2001
147. Fonseca, Elza M. M. and Oliveira, Carlos A.M.; “Numerical Modelling of Internal
Voids in Fire Exposed Structures”, 5º Interamerican Congress on Computers
Applied to the Process Industry, CAIP’2001, Campos de Jordão–SP – Brasil, 22-25
Outubro, 2001
148. Lhate, I.A. and António, C.A. Conceição, “Optimização do Comportamento
Dinâmico de Estruturas Baseada em Pesquisa Evolucionária”, 2º Congresso LusoMoçambicano de Engenharia, Maputo, Moçambique, 3-6 Setembro, pp.C41-C51,
2001
214
149. Piloto, P.A.G.; Vila Real, P.M.M. and Franssen, J.M.; “Numerical and
Experimental Evaluation of Lateral Torsional Buckling of Beams at Elevated
Temperatures”, 10th International Conference on Computational Methods and
Experimental Measurements, 4-6 de Junho, Alicante, Espanha, 2001
150. Piloto, P.A.G.; Vila Real, P.M.M. and Franssen, J.M.; “The Influence of Lateral
Bending Restrain in Numerical and Experimental Evaluation of Lateral Buckling
Resistance Design Moment of Steel I Beams at Elevated Temperatures”, 5º
Congresso Interamericano de Computacion Aplicada a la Industria de Processos,
CAIP’2001, Campos do Jordão, SP – Brasil, 22 a 25 de Outubro, 2001
151. Sousa, L.C.; Castro, C.F. and António, C.A.C.; “Optimização de processos de
forjamento de metais”, 2º Congresso Luso-Moçambicano de Engenharia, Maputo,
Moçambique, 3-6 Setembro, pp.D7-D15, 2001
152. Sousa, L.C.; Castro, C.F.; António, C.A.C. and Santos, A.D.; “Inverse methods
applied to industrial forging processes”, proccedings of the 4th international
ESAFORM Conference on Material Forming, A.M. Habraken Ed., Université of
Liege, pp.541-544, 2001
153. Vila Real, P.M.M.; Piloto, P.A.G. and Franssen, J.M.; “A Simple Model for the
Lateral-Torsional Buckling of Steel I-Beams under Fire Conditions: Nimerical and
Experimantal Validation”, XVIII Congresso CTA - Colegio dei Tecnici
dell’Acciaio, Ed. ACS ACAI SERVIZI srl, Veneza, Itália, 26 a 28 de Setembro,
pp.187-196, 2001
154. Ribeiro, P.; “Periodic vibration of plates with large displacements”, 42nd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials
Conference and Exhibit, paper nº AIAA-2001-1312, 2001
155. Ribeiro, P. “A hierarchical finite element for geometrically non-linear vibration of
thick plates and shallow shells”, Euromech Colloquium 425, Nonlinear Dynamics,
Control and Condition Monitoring, 20-24 August, University of Aberdeen, UK,
2001
156. António, C.A. Conceição; “Reliability based optimal design of geometrically nonlinear composite structures using an evolutionary model”, CCC 2001 International
Conference on Composites in Construction, Porto, Portugal, 10-12 Outubro, 2001
157. AMP de Jesus, O Salomón, S Oller, AS Ribeiro, AA Fernandes, "Continuum
damage mechanics approach to fatigue life prediction of metallic structural
components", International Congress of Fatigue-2002, Stockholm, Sweden, June
2002
158. JMA César de Sá, RM Natal Jorge, RPR Cardoso, "Improved finite element
analysis on blow forming", Proceedings of the 2nd International Colloquium on
Modelling of Glass Forming and Tempering, Universite de Valenciennes, France,
pp.73-78, 2002
159. JMA César de Sá, PMA Areias, RM Natal Jorge, "Numerical model for cutting
using a gradient damage model and element erosion", Proceedings of 5th
215
International Conference on Material Forming, ESAFORM, M Pietrzyk, Z Mitura,
J Kaczmar, (Editors), Cracóvia, Polónia, pp.571-574, 2002
160. JMA César de Sá, RM Natal Jorge, PMA Areias, RAF Valente, "Formulações
mistas construídas a partir do enriquecimento do gradiente de deformações na
solução de problemas com restrições", V Congreso de Métodos Numéricos en
Ingeniería, JM Goicolea, C Mota Soares, M Pastor, G Bugeda, (Editors), Madrid,
Spain, CD-Rom, Livro de Resumos, pp.192, 2002
161. RAF Valente, RM Natal Jorge, JMA César de Sá, PMA Areias, "Formulação nãolinear aplicada aos elementos tipo casca com deformações de corte transverso
acrescentadas", V Congreso de Métodos Numéricos en Ingeniería, JM Goicolea, C
Mota Soares, M Pastor, G Bugeda, (Editors), Madrid, Spain, CD-Rom, Livro de
Resumos, pp.232, 2002
162. RJA Sousa, RM Natal Jorge, PMA Areias, RAF Valente, JMA César de Sá, AA
Fernandes, "Elementos lineares de baixa ordem para análise 3D", V Congreso de
Métodos Numéricos en Ingeniería, JM Goicolea, C Mota Soares, M Pastor, G
Bugeda, (Editors), Madrid, Spain, CD-Rom, Livro de Resumos, pp.193, 2002
163. JMA César de Sá, PMA Areias, RM Natal Jorge, "Modelo numérico tridimensional
de corte usando um modelo gradiente de dano", V Congreso de Métodos Numéricos
en Ingeniería, JM Goicolea, C Mota Soares, M Pastor, G Bugeda, (Editors),
Madrid, Spain, CD-Rom, Livro de Resumos, pp.101, 2002
164. RM Natal Jorge, MPL Parente, AA Fernandes, PMA Areias, RAF Valente, JMA
César de Sá, "Simulação do processo de hidroformagem em peças tubulares", V
Congreso de Métodos Numéricos en Ingeniería, JM Goicolea, C Mota Soares, M
Pastor, G Bugeda, (Editors), Madrid, Spain, CD-Rom, Livro de Resumos, pp.106,
2002
165. RAF Valente, RM Natal Jorge, JMA César de Sá, PMA Areias, "Application of the
Enhanced Assumed Strain Concept Towards the Development of Shear LockingFree Shell Elements", Proceedings of Fifth World Congress on Computational
Mechanics, WCCM V, HA Mang, FG Rammerstorfer, J Eberhardsteiner, (Editors),
ISBN 3-9501554-0-6, http://wccm.tuwien.ac.at, Vienna, Austria, 2002
166. RJA Sousa, RM Natal Jorge, RAF Valente, PMA Areias, JMA César de Sá, AA
Fernandes, "Low Order Elements for 3D Analysis", Proceedings of Fifth World
Congress on Computational Mechanics, WCCM V, HA Mang, FG Rammerstorfer, J
Eberhardsteiner, (Editors), ISBN 3-9501554-0-6, http://wccm.tuwien.ac.at, Vienna,
Austria, 2002
167. PMA Areias, JMA César de Sá, CAC António, RM Natal Jorge, “Finite Strain
Plasticity Including Softening: A Gradient Damage Model”, Proceedings of Fifth
World Congress on Computational Mechanics, WCCM V, HA Mang, FG
Rammerstorfer,
J
Eberhardsteiner,
(Editors),
ISBN
3-9501554-0-6,
http://wccm.tuwien.ac.at, Vienna, Austria, 2002
168. LC Sousa, AA Fernandes, "Numerical simulation Laser of the laser welding
thermal cycle", 12th International TWI Computer Technologies in Welding and
Manufacturing Conference, 26-30 August 2002, Sydney Austrália. Presented at
216
AUTOJOIN (EU Thematic Network) Workshop, Aachen, Germany, 26th November
2002
169. Ana Reis, Pedro Teixeira, J Ferreira Duarte, Abel Santos, A Barata da Rocha, AA
Fernandes, "Sheet metal forming of tailored welded blanks – experimental results
and numerical simulation", ESAFORM 2002, 2002
170. M Vigário de Figueiredo, J Ferreira Duarte, A Barata da Rocha, JJ Grácio, AA
Fernandes, "Inflence of the welding Direction on the mechanical properties of a
mild steel", Int. Sheet Metal Review, 2002
171. PP Camanho, ST Pinho, "Mixed-Mode Decohesion Elements for analyses of
delamination in skin-stiffener composite structures", Proceedings of the European
Conference on Spacecraft Structures, Materials and Mechanical Testing, European
Space Agency, Toulouse, France, 2002
172. ST Pinho, HB Martins, PP Camanho, MH Santare and PT de Castro, "The Influence
of Cold-work on the stress intensity factor of cracked holes", Proceedings of the 8th
Portuguese Conference on Fracture, pp.179-188, 2002
173. AMP de Jesus, O Salomón, S Oller, AS Ribeiro, AA Fernandes, "Continuum
Damage Mechanics Approach to Fatigue Life Prediction of Metallic Structural
Components", Proceedings of the Eighth International Fatigue Congress - Fatigue
2002, Vol.4/5, pp.2713-19, Stockholm, Sweden, 2-7 June 2002
174. A Balacó de Morais, MFSF de Moura, AT Marques, PMST de Castro, "Fracture
interlaminar de compósitos carbono/epóxido", V Congresso Métodos Numéricos en
Ingeniería, Madrid, 3-6 June 2002
175. AMP de Jesus, AS Ribeiro, JD Costa, AA Fernandes, "Low cycle fatigue and cyclic
elasto-plastic behaviour of P355 NL1 steel", 8th Portuguese Conference on
Fracture, Universidade de Trás-os-Montes e Alto Douro, Vila Real, Feb 20-22,
2002
176. RM Natal Jorge, AA Fernandes, "Fatigue analysis of a steam-heated sterilizer based
on a design by analysis route", 8th Portuguese Conference on Fracture,
Universidade de Trás-os-Montes e Alto Douro, Vila Real, pp.473-479, Feb 20-22,
2002
177. LFM Silva, FMF Oliveira, PMST de Castro, "Fatigue Crack Growth of Rails for
Railways", 8th Portuguese Conference on Fracture, Universidade de Trás-osMontes e Alto Douro, Vila Real, Feb 20-22, 2002
178. JF Silva, P Vieira, AB Morais, AT Marques, PMST de Castro, "Mode II Fracture
Toughness of Glass Fibre Reinforced Composites", 8th Portuguese Conference on
2002
179. SD Pastrama, PMST de Castro, "Stress Intensity Factors for Cracks Starting from
Rivet Holes", 8th Portuguese Conference on Fracture, Universidade de Trás-osMontes e Alto Douro, Vila Real, Feb 20-22, 2002
217
180. ST Pinho, HBM Martins, PP Camanho, MH Santare, PMST de Castro, "The
Influence of Cold Work on the Stress Intensity Factor of Cracked Holes", 8th
Portuguese Conference on Fracture, Universidade de Trás-os-Montes e Alto
Douro, Vila Real, Feb 20-22, 2002
181. PFP de Matos, PMGP Moreira, PMST de Castro, "Stress Intensity Factor
Determination Using the Finite Element Method", 8th Portuguese Conference on
2002
182. PFP de Matos, PMGP Moreira, SD Pastrama, PMST de Castro, "The Precision of
Crack Opening Values and the Computation of K Using the Weight Function
Method", 8th Portuguese Conference on Fracture, Universidade de Trás-os-Montes
e Alto Douro, Vila Real, Feb 20-22, 2002
183. Max M. Santos, Marcelo R. Stemmer, Francisco Vasques, “Schedulability Analysis
of Messages in a CAN Network Applied to an Unmanned Airship”, in Proceedings
of the 28th Annual Conference of the IEEE Industrial Electronics Society
(IECON'02), Sevilla, Spain, 5-8 November, 2002
184. Salvatore Cavalieri, Salvatore Monforte, Eduardo Tovar, Francisco Vasques,
“Evaluating Worst-Case Response Time in Mono and Multi-Master Profibus-DP
Networks”, in Proceedings of the 4th IEEE International Workshop on Factory
Communication Systems (WFCS'2002), Vasteras, Sweden, pp.233-240, August
2002
185. Salvatore Cavalieri, Salvatore Monforte, Eduardo Tovar, Francisco Vasques,
“Multi-Master Profibus-DP Modelling and Worst-Case Analysis Based
Evaluation”, in Proceedings of the 15th IFAC World Congress on Automatic
Control, Barcelona, Spain, July 2002
186. Mário Alves, Eduardo Tovar, Francisco Vasques, Gerhard Hammer, Klaus Rother,
“Real-Time Communications over Hybrid Wired/Wireless PROFIBUS-based
Networks”, in Proceedings of the 13th Euromicro Conference on Real-Time
Systems (ECRTS'02) , Vienna, Austria, pp. 142-151, June 2002
187. J. Carneiro, A. Magalhães, “Strategies for Machine Loading”, in Proc. of the 5th
Portuguese Conference on Automatic Control, Aveiro, 2002
188. F. Gomes de Almeida, António Lopes, Paulo Abreu, “Dynamic Decoupling of
Robotic Manipulators: A Force-Impedance Control Perspective”, Proc. of the 5th
Portuguese Conference on Automatic Control, pp. 177-182, Aveiro, 2002
189. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Performance
Analysis of Multi-Legged Systems”, Paper #1110, ICRA02 - 2002 IEEE
International Conference on Robotics and Automation, Washington, USA, May 11 15, 2002
190. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Power Analysis of
Multi-Legged Systems”, Paper code: 23064, 15th IFAC World Congress,
Barcelona, Spain, July 21-26, 2002
218
191. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Gait Efficiency of
Walking Robots”, Paper-ID: 53, INES 2002 - 6th International Conference on
Intelligent Engineering Systems, May 26-28, Opatija, Croatia, 2002
192. Henriqueta Nóvoa, Chantal Guilhonato, J. Falcão e Cunha, Rui Graça Feijó: The eMercatura Project – an Evolving and Innovative Prototype for a Portuguese Wine
Business Portal, in Challenges and Achievements in E-business and E-work, B.
Stanford-Smith, Enrica Chiozza, Mireille Edin (Eds.), IOS Press, Amsterdam, pp.
1478-1485, 2002
193. António Amador, Henriqueta Nóvoa, J. Falcão e Cunha: ICT Current Developments
in the Portuguese Construction Industry and Future European Challenges, in
Challenges and Achievements in E-business and E-work, B. Stanford-Smith, Enrica
Chiozza, Mireille Edin (Eds.), IOS Press, Amsterdam, pp. 1235-1242, 2002
194. Henriqueta Nóvoa, António Amador, J. Falcão e Cunha: E-Business Developments
in the Portuguese Construction Industry and Future European Challenges, in
Proceedings of the European Conference on Information and Communication
Technology Advances and Innovation in the Knowledge Society- eSm@rt 2002Towards a European Knowledege Economy in the Construction and Related
Sectors, University of Salford (Eds.), pp. 32-41, 2002
Technologies in a Civil Construction SME and Assessment of its Impact, apres.:
Industry Cases Session, PRO-VE'02, 3rd IFIP Working Conference on
Infrastructures for Virtual Enterprises, Sesimbra, 2002.05.1-3, 2002
196. Henriqueta Nóvoa: Practical modeling requirements: Regional Meeting – “Future
Modelling Needs in Emerging Collaborative Networks” do projecto IST-200029478 “Thinking network of experts on emerging smart organizations”, Lisboa,
2002.07.19, 2002
197. Cardoso, D.M. and J.F.Sousa, “A Partial Order on the Set of Solutions of a Multiattribute Ranking Problem”, 56th Meeting of the EURO Working Group on Multiple
Criteria Decision Aiding, Coimbra-Portugal, 2002
198. Cardoso, D.M. and J.F.Sousa, “Confirmation Results on Multi-attribute Ranking
Problems”, XI CLAIO – Congresso Latino-Americano de Investigación Operativa,
Concepción – Chile, 2002
199. Nuno Jardim Nunes, J. Falcão e Cunha: Towards Flexible Automatic Generation of
User-Interfaces via UML and XMI, in Proceedings of IDEAS 2002 – 5º Workshop
Iberoamericano de Ingeniería de Requisitos y Ambientes Software, Oscar Pastor,
Miguel Katrib (eds.), La Habana, Cuba, 2002, pp. 316-327, 2002
200. Lia Patrício, J. Falcão e Cunha, Raymond Fisk: A Proposed Methodology for
Enhancing Technology Service Delivery Systems: An Application to Internet
Banking, in Proceedings of IDEAS 2002 – 5º Workshop Iberoamericano de
Ingeniería de Requisitos y Ambientes Software, Oscar Pastor, Miguel Katrib (eds.),
La Habana, Cuba, 2002, pp. 364-374, 2002
219
201. AS Camanho, RG Dyson, "Assessing Program and Managerial Efficiencies: An
application to Bank Branches", in Proceedings of the International DEA
Symposium 2002 – Efficiency and Productivity Analysis in the 21st Century, A
Emrouznejad, R Green, and V Krivonozhko (Eds.), Moscow, pp.53-59, 2002
202. EO Fernandes, "Policies on Renewable Energy Resources in Regional Competitive
Markets", In Abstracts of the EuroSun2002, The Fourth ISES - Europe Solar
Congress, 166-167, 2002
203. EO Fernandes, "Energy and Sustainable Development", 1st International
Conference on Sustainable Energy Technologies, Book of Proceedings, Porto, 2002
204. GVA Silva, MTSD Vasconcelos, AM Santos, EO Fernandes, "Volatile organic
compound emission from a latex paint - influence of the substrate", In Abstracts of
the 8th FECS Conference on Chemistry in the Environment: " Chemistry for a
Sustaining World", Environmental Science and Pollution Research, 3, 166-167,
2002
205. AO Martins, GVA Silva, MTSD Vasconcelos, "Influence on the Indoor Air Quality
of a recently applied vinyl coated cork flooring material and surface care products",
In Abstracts of the 8th FECS Conference on Chemistry in the Environment:
"Chemistry for a Sustaining World", Environmental Science and Pollution
Research, 3, 155-156, 2002
206. J Facão, A Oliveira, "Simulation of the Thermal Behaviour of a Hybrid Heat Pipe
Solar Collector", Proceedings SET2002 Conference (Int. Conf. on Sustainable
Energy Technologies), Porto, 2002
207. A Palmero, A Oliveira, "Numerical Simulation of an Integrated Solar Louvre
Collector System", Proceedings SET2002 Conference (Int. Conf. on Sustainable
Energy Technologies), Porto, 2002
208. A Silva, C Afonso, A Oliveira, "A New Device for Tracer Gas Dispersion in Ducts
for Very Short Mixing Distance", Proceedings SET Conference (Int. Conf. on
Sustainable Energy Technologies), Porto, 2002
209. A Oliveira, J Facão, "Heat and Mass Transfer Correlations for the Design of Small
Indirect Contact Cooling Towers", Proceedings HEFAT Conference (Int. Conf. on
Heat Transfer, Fluid Mechanics and Thermodynamics, invited lecture), South
Africa, 2002
210. J Facão, A Oliveira, "Comportamento Térmico de um Colector Solar Híbrido para
Aplicação a Sistemas de Cogeração de Pequena Escala", Proc. XI Congresso
Ibérico e VI Iberoamericano de Energia Solar, ISES, Vilamoura, 2002
211. A Palmero, A Oliveira, "Simulação Energética de um Colector Solar Integrado num
Sombreador Para Utilização em Edifícios", Proc. XI Congresso Ibérico e VI
Iberoamericano de Energia Solar, ISES, Vilamoura, 2002
212. J. R. Fonseca, P. Ribeiro, "Beam Hierarchical finite element for geometrically nonlinear vibrations in space", WCCM V - Fifth World Congress on Computational
Mechanics, Paper ID: 80199, Viena, Austria, Eds.: H. A: Mang. F. G.
Rammerstorfer, J. Eberhardsteiner, ISBN 3-9501554-0-6, July 7-12, 2002
220
213. C. Guedes, J. César de Sá, "Aplicação do Método EFG ("Element-Free Galerkin")
em Processos de Conformação Plástica", Métodos Numéricos en Ingeniería V,
Eds.: J. M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June
3-6, 2002
214. J. T. Barbosa, "Análise Transitória de Placas e Cascas reforçadas usando um
Algorítmo de Integração Implícito", Métodos Numéricos en Ingeniería V, Eds.: J.
M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6,
2002
215. C. A. Conceição António, "Um Modelo Híbrido de Pesquisa Evolucionária para
Optimização de Estruturas", Métodos Numéricos en Ingeniería V, Eds.: J. M.
Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6, 2002
216. C. A. Conceição António, I. Lhate, "Projecto Óptimo de Estruturas Fabricadas
com Compósitos Laminados Híbridos", Métodos Numéricos en Ingeniería V, Eds.:
J. M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6,
2002
217. Catarina F. Castro, C. A. Conceição António, L. C. Sousa, Optimização de
Processos de Forjamento a Quente", Métodos Numéricos en Ingeniería V, Eds.: J.
M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6,
2002
218. J. César de Sá, Francisco A. Pires, L. C. Sousa, R. Natal Jorge, Modelação
Numérica do Dano Dúctil Plástico em Processos de Enformação Plástica em
Massa", Métodos Numéricos en Ingeniería V, Eds.: J. M. Goicolea, C. Mota Soares,
M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6, 2002
219. R. P. Cardoso, J. W. Yoon, J. J. Grácio, F. Barlat, J. César de Sá, R. Valente,
"Projecto e Optimização de Processos de Conformação Plástica de Chapa
recorrendo ao Método dos Elementos Finitos", Métodos Numéricos en Ingeniería
V, Eds.: J. M. Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain,
June 3-6, 2002
220. P. Vila Real, C. M. Oliveira, "Modelação Numérica de Problemas Térmicos
envolvendo mudança de Fase", Métodos Numéricos en Ingeniería V, Eds.: J. M.
Goicolea, C. Mota Soares, M. Pastor y G. Bugeda, SEMNI, Spain, June 3-6, 2002
221. Francisco A. Pires, José. A. César Sá , Luísa C. Sousa e Renato. N. Jorge,
“Modelação Numérica do dano dúctil plástico em processos de enformação
plástica em massa”, V Congresso de Métodos Numéricos en Ingenieria, Eds J. M.
Goicolea, C. Mota Soares, M. Pastor y Bugeda, Madrid, Espanha, 3-6 de Junho de
2002
222. PMM Vila Real, Ronisi Cazeli, L Silva, A Santiago, PAG Piloto, "The effect of
residual stresses in lateral-torsional buckling of steel beams at elevated
temperatures", proceedings of the third European Conference on Steel Structures EUROSTEEL, Volume II, pp.1437-1448, ISBN 972-98376-3-5, Coimbra, Portugal,
19-20 September 2002
221
223. P.A.G. Piloto, Paulo Vila Real, Luís Mesquita, M.A.P Vaz, “Steel Mechanical
Properties Evaluated At Room Temperature After Being Submitted At Fire
Conditions”; XXX IAHS - World Congress on Housing Housing Construction –
An Interdisciplinary Task; volume 3, pp 1545,1553, ISBN 972-9027-31-5,
Coimbra, Portugal, September 9-13, 2002
224. J.M.A. César de Sá & Francisco M. A. Pires, “Modelling of ductile fracture
initiation in bulk metal forming”, Proceedings of ESAFORM 2002, 5th ESAFORM
Conference on Material Forming, Kraków, Poland, April 13-17 2002, Publishing
House AKAPIT, Poland, pp 147-150
225. M. H. F. M. Barros, C. M. Mota Soares, R. A. F. Martins, “Elastic degradations and
damage in concrete following non-linear equations and loading funcion”,
Proceedings of the Sixth International Conference on Computational Structure
Technology, Editors: B. H. V. Topping , Z. Bittmar, Civil Camp, Press 2002
Steerling, Scontland, 2002
226. MPL Parente, RM Natal Jorge, RAF Valente, JMA César de Sá, “Anisotropic
elasto-plastic behaviour of thin shells using S4E6P7 element”, Proceedings of VII
International Conference on Computational Plasticity, Fundamentals and
Applications, COMPLAS VII, eds. DRJ Owen, E Oñate, CIMNE, Barcelona, 7-10
April 2003
227. RJA de Sousa, RM Natal Jorge, RAF Valente, JMA César de Sá, “Formulation of
enhanced strain solid elements for incompressibility and thin shell application in
non-linear range”, Proceedings of VII International Conference on Computational
Plasticity, Fundamentals and Applications, COMPLAS VII, eds. DRJ Owen, E
Oñate, CIMNE, Barcelona, 7-10 April 2003
228. RAF Valente, RM Natal Jorge, RPR Cardoso, JMA César de Sá, JJA Grácio,
“Enhanced strain shell elements for simulation of hydroforming processes”,
Proceedings of VII International Conference on Computational Plasticity,
Fundamentals and Applications, COMPLAS VII, eds. DRJ Owen, E Oñate,
CIMNE, Barcelona, 7-10 April 2003
229. FA Marcos, RM Natal Jorge, JMA César de Sá, “Modelo de elementos finitos para
a extracção do sumo da cana de açúcar”, publicado no livro de actas do 3º
Congresso Luso Moçambicano de Engenharia, eds. JFS Gomes, C Afonso, CAC
António, Matos, pp.1189-1200, 19-21 August 2003
230. PMA Areias, RM Natal Jorge, JT Barbosa, AA Fernandes, T Mascarenhas, M
Oliveira, B Patrício, “Experimental and Finite Element Analysis of Human Skin
Elasticity”, Proceedings of IMECE’03, 2003 ASME International Mechanical
Engineering Congress & Exposition, Washington, D.C., USA, 16-21 November
2003
231. Lucas FM da Silva, RD Adams, "Charges thermiques dans une jonction adhésive
mixte", 12èmes Journées d’Etude sur l’Adhésion JADH’2003, Ile d’Oléron, France,
29 Septembre-3 Octobre 2003
222
232. Lucas FM da Silva, RD Adams, "Charges thermiques dans une jonction adhésive
mixte", 12èmes Journées d’Etude sur l’Adhésion JADH’2003, Ile d’Oléron, France,
29 Septembre-3 Octobre 2003
233. AMP de Jesus, AS Ribeiro, AA Fernandes, "Characterization of the Fatigue
Behaviour of a Steel Pressure Vessel Based on a Experimental Program",
Proceedings of 10th International Conference on Pressure Vessel Technology –
ICPVT10, JL Zenan, (Editor), pp. 411-418, Vienna, Austria, 7-10 July 2003
234. AMP de Jesus, AS Ribeiro, AA Fernandes, "Modelling Studies of the Fatigue
Behaviour of a Nozzle-to-Vessel Intersection", Proceedings of The 2003 ASME
Pressure Vessel and Piping Conference, Computer Technology and Applications,
PVP – Vol. 458, ASME, W Reinhard, J Martin (Editors), pp. 91-98, Cleveland,
Ohio, USA, 20-24 July 2003
235. A Castro, FA, AA Fernandes, "Environmental Performance Evaluation in
Portuguese Organizations. An overview.", Internacional Simposyum on
“ENVIRONMENT 2010: Situation and Perspectives for the European Union”,
Faculdade de Engenharia da Universidade do Porto, 6-10 May, 2003
236. PP Camanho, HB Martins, CML Tavares, R Oliveira, AT Marques, "Increasing the
efficiency of CFRP bolted joints using bonded inserts", Proceedings of the 14th
International Conference on Composite Materials (ICCM-14), San Diego, U.S.A.,
2003
237. J Costa, A Turón, PP Camanho, N Blanco, N Gascons, "Simulación con elementos
de descohesión de la delaminación en modo mixto variable mediante un
acoplamiento energético", Proceedings do MATCOMP 03- V Congreso Nacional de
Materiales Compuestos, Saragoça, Spain, 2003
238. CG Dávila, PP Camanho, "Analysis of the effects of residual strains and defects on
skin/stiffener debonding using decohesion elements", 44th AIAA-ASME-ASCEAHS-ASC Structures, Structural Dynamics, and Materials Conference, Norfolk,
Virginia, AIAA, April 7-10, 2003
239. AA Fernandes, PT de Castro, "Fracture in a fleet of urban passenger bases: a failure
analysis", 2003 ASME INTERNATIONAL, Mechanical Engineering Congress an d
R & D Expo, Washington Congress an R & D Expo, Washington DC, USA
November 15-21 2003
240. PMST de Castro, ÞD Pastrama, "Approximate determination of stress intensity
factors for through cracks starting from three adjacent rivet holes", Proceedings of
the ninth national symposium on fracture mechanics, Romania, Sibiu - Medias,
pp.A13-A18, Oct 31-Nov 1, 2003
241. PFP de Matos, PMGP Moreira, PMST de Castro, A Portela, "Análise de placas
fendidas pelo método dos elementos de fronteiro dual: implementação em pósprocessamento das equações de Williams", VI Congresso Ibero-Americano de
Engenharia Mecânica - CIBEM6, Vol.1, pp.197-202, Coimbra 16-18 Out 2003
242. MFSF Moura, JPM Gonçalves, AG Magalhães, PMST de Castro, "Elementos
finitos de interface aplicados ao estudo da resistência mecânica de juntas coladas de
223
interface", VI Congresso Ibero-Americano de Engenharia Mecânica - CIBEM6,
Vol.1, pp.597-602, Coimbra 16-18 Out 2003
243. AT Marques, PMST de Castro, JA Simões, "MSc dissertations in industrial design:
an experience", 1st Int Meeting of Science and Technology of Design: Senses and
Sensibility in Technology, pp.340-343, Lisbon, Sept 25-26, 2003
244. PMST de Castro, "The Faculty of Engineering of the University of Porto: strategic
planning, and trends for development", Global Engineer: Education and Training
for Mobility Société Européenne pour la Formation des Ingenieurs, SEFI annual
conf 2003, Porto, Sept 7-10, 2003
245. JF Silva, AB Morais, P Vieira, AT Marques, PMST de Castro, "Fracture toughness
characterization of filament wound pipes made with thermosetting and
thermoplastic matrices", 14th International Conference on Composite Materials,
ICCM-14, San Diego, California, July 14-18, 2003
246. T Franqueira, C Aguiar, PMST de Castro, "Hipocrates or hypocrisy?", 5th
European Academy of Design Conference, Barcelona, Spain, April 28-30, 2003
247. Maria Teresa Restivo, Joaquim Gabriel Mendes e Fátima Chouzal, "Using a
Graphical Data Acquisition Software on Early Labs Learning", European Society
for Engineering Education (SEFI) Conference, Proceedings pp. 335-339, FEUP,
Sep. 2003
248. Maria Teresa Restivo e Joaquim Gabriel Mendes, "Controlo e Aquisição de Dados
de uma Prensa Hidráulica Protótipo e suas Aplicações no Ensino e na
Investigação”, 3rd Congress Luso-Moçambicano de Engenharia, Maputo,
Mozambique, pp.151-159, August 2003
249. Maria Teresa Restivo, Maria de Fátima Chouzal and Fernando Gomes de Almeida,
“Uma Experiência de E-Learning no Domínio da Instrumentação para Medição”, 3º
Congresso Luso-Moçambicano de Engenharia, Maputo, Mozambique, pp 53-59,
19-21 August 2003
250. Joaquim Mendes, Teresa Restivo, Carlos Moreira da Silva, Jorge Reis
“Reaproveitamento de Equipamentos Obsoletos no Desenvolvimento de um
Sistema de Medição Dimensional para Apoio ao Ensino da Engenharia”, 3rd
Congress Luso-Moçambicano de Engenharia, Maputo, Mozambique, pp.161-168,
August de 2003
251. M. Santos, F. Vasques, M. Stemmer, “Evaluation of the Timing Properties of Two
Control Networks: CAN and PROFIBUS”, in Proc. of the IEEE International
Symposium on Industrial Electronics (ISIE-2003), June 9-12, 2003, Rio de Janeiro,
Brazil
252. J.Falcão Carneiro, A.Pessoa de Magalhães, F.Gomes de Almeida, A.Barata da
Rocha, “A new robot with optimal control for press feeding”, SheMet 2003 – 10th
International Conference on Sheet Metal, Jordanstown, UK, 14-16th April 2003
253. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Cascade control of a
hexapod robot”, CLAWAR’2003 - 6th International Conference on Climbing and
224
Walking Robots, Muscato, G. and Longo, D. (eds.), Professional Engineering
Publishing Ltd, UK., ISBN 1-86058-409-8, pp.163-170, 2003
254. F. Ataíde, M. Santos, F. Vasques, M. Stemmer, “Compensação de Atraso em
Sistemas de Controle Via Rede CAN”, In Proc. of 1st SEMPAC IEEE-MG, Juiz de
Fora, Brazil, 2003
255. Henriqueta Nóvoa, Miguel Guimarães, J. Falcão e Cunha: ADIRA Case Study:
Impact of ICT Adoption on Innovation by an Industrial SME, in Building the
Knowledge Economy: Issues, Applications, Case Studies, Paul Cunningham,
Miriam Cunningham, Peter Sapelnig (Eds.), IOS Press, pp. 1367-1373, 2003
256. Henriqueta Nóvoa, Miguel Guimarães, J. Falcão e Cunha: The ADIRA Case Study:
how an industrial SME has effectively innovated by deploying advanced ICT
technologies, apres.: eChallenges 2003 (http://www.echallenges.org), Bolonha,
Itália, 2003.10.23, 2003
257. Matos, A. S., J. P. Sousa and J. F. Sousa, "Caracterização e avaliação dos
Transportes Colectivos de Passageiros na Área Metropolitana de Maputo", in
Proceedings of 3º Congresso Luso-Moçambicano de Engenharia, Gomes, J. S., C.
F. Afonso, C. C. António e A. S. Matos (Eds.), pp.923-935, 2003
258. Matos, A. S., J. P. Sousa and J. F. Sousa, "Mobilidade em Transporte Colectivo de
Passageiros na Área Metropolitana de Maputo ", in Proceedings of 3º Congresso
Luso-Moçambicano de Engenharia, Gomes, J. S., C. F. Afonso, C. C. António e A.
S. Matos (Eds.), pp. 937-954, 2003
259. Lia Patrício, J. Falcão e Cunha, Raymond Fisk: The Relevance of User Experience
Requirements in Interface Design – a Study of Internet Banking, in Proceedings of
IDEAS 2003 – 6º Workshop Iberoamericano de Ingeniería de Requisitos y
Ambientes Software, Mario Piattini, Luca Cernuzzi, Francisco Ruíz (eds.),
Assunción, Paraguay, ISBN: 84-96023-05-2, pp. 39-49, 2003
260. Jorge Aguiar Miguens, J. Falcão e Cunha, António Amador: E-Procurement
Decision Support System for a Civil Construction Company, Session FSP 7.14 – EBusiness and E-Commerce, in Proceedings of the IADIS International
WWW/Internet 2003 Conference, IADIS Press, 2003
261. Lia Patrício, J. Falcão e Cunha, Raymond Fisk, Nuno Jardim Nunes: Using
Essential Use Cases for Multiplatform Service Design, posted at Constantine &
Lockwood, Ltd. Home Page - The Usage-Centered Design Resource www.foruse.com,
http://www.foruse.com/articles/multiplatform.pdf, 8 pp, 2003
262. JS Cabral, L Ribeiro, “A Benchmarking Methodology for the Metalcasting
Industry”, Business Excellence I: Performance Measures, Benchmarking and Best
Practices in New Economy, editado por Goran D. Putnik and Angappa
Gunasekaran, pp. 218-223, Guimarães, 2003
263. JS Cabral, H Alvelos, “The Problem of Assessing Customers Satisfaction Through
Questionnaires”, Proceedings of the 8th Annual International Conference on
Industrial Engineering Theory, Applications and Practice, Las Vegas, 2003
225
264. AS Camanho, "Cost efficiency measurement with incomplete price information: a
DEA application to bank branch assessments", Workshop on Efficiency and
Productivity Analysis, Universidade Católica Portuguesa, Porto, 2003.
265. C Vaz, AS Camanho, "Performance measurement in retailing organisations using
DEA", Workshop on Efficiency and Productivity Analysis, Universidade Católica
Portuguesa, Porto, 2003
266. E Oliveira Fernandes, J Farinha Mendes, J Correia de Oliveira, L Silva, S Spencer,
M João Carvalho, J Cruz Costa, E Maldonado, "Promoting solar water heating and
other renewables in Portugal", ISES Solar World Congress (ISES 2003), June 1419, Goteborg, Sewden and European Solar Thermal Technology Conference
(ESTEC 2003), Freiburg, Germany, June 26-27, 2003
267. GV Silva, EO Fernandes, MTSD Vasconcelos, AM Santos, "Adsorption/desorption
of volatile organic compounds by uncoated cork parquet", Proceedings of Healthy
Buildings 2003, Singapore, Edit. Tham Kwok Way, Chandra Sekhar and David
Cheong, 1, 414-419, 2003
268. Martins, Anabela O, Silva, Gabriela VA and Vasconcelos, M Teresa D, "Effects of
building renovation or cleaning on indoor air quality: the air we breath", In
Abstracts of the 13th Annual Conference of the International Society of Exposure
Analysis, Stresa, Italy, September 21-25, P3.1-21, 2003
269. MD Castro, et al., "Frigoríficos domésticos: valuación térmica frente varios
regímenes de funcionamiento", Libro del actas del II congresso Espanol de
Ciencias y Técnicas del Frio, editores: Seara, J.F. y Vázquez, M.V., Vigo, Spain,
2003
270. A Oliveira, J Facão, S Varga, "Evaluation of the Use of Artificial Neural Networks
for the Simulation of Hybrid Solar Collectors", Proceedings IEEES-1 Conference
(Int. Conf. on Exergy, Energy and Environment Symposium), Turquia, 2003
271. Martins, Anabela O, Silva, Gabriela VA and Vasconcelos, M Teresa D, "VOCs
emissions from a cork varnished flooring material: small scale and full scale
measurements", In Proceedings of the International Symposium Environment 2010
Situation and Perspectives for the European Union, University of Porto, Poster 11.
2003
272. Paulo Davim, Pedro Reis, Carlos Alberto Conceição António, "Drilling fiber
reinforced plastics (FRP) manufactured by hand lay-up: Influence of matrix (Viapal
VUP 9731 and ATLAC 382-05)", in AMPT 2003 - International Conference on
Advances in Materials and Processing Technologies, pp.908-911, 2003
273. P. Ribeiro, “Comparison of methods of studying the stability of soultions of nonlinear systems”, 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece,
Book of abstracts, 2003
274. E. Manoach, P. Ribeiro, “Coupled, Thermoelastic, Large Amplitude Vibrations of
Timoshenko Beams”, 5th Euromech Solid Mechanics Conference, Thessaloniki,
Greece, Book of abstracts, 2003
226
275. P. Ribeiro, “A p-version finite element for non-linear vibration of moderately thick
laminated plates”, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics, and Materials Conference and Exhibit, paper nº AIAA-2003-1711, 2003
276. P. M. A. Areias, José M. César de Sá, Carlos Conceição António, “A General 3D
Element for Solid and Shell Analisys Including Incompressibility”, VII
International Conference on Computational Plasticity_COMPLAS VII, E. Õnate
and D. R. J. Owen (Eds), CIMNE, Barcelona 7-10 April, CIMNE, pp.93, 25
páginas (CD), 2003
277. P. M. A. Areias, José M. César de Sá, “Contact Between Deformable solids: A new
order
approach”,
VII
International
Conference
on
Computational
Plasticity_COMPLAS VII, E. Õnate and D. R. J. Owen (Eds), CIMNE, Barcelona
7-10 April, 2003
278. Ricardo J. Alves de Sousa, Renato M. Natal Jorge, Robertt A. Fontes Valente, José
M. César de Sá, “Formulation of Enhanced strian in solid elements for
imcompressibility and thin shell application in non-linear range”, VII International
Conference on Computational Plasticity_COMPLAS VII, E. Õnate and D. R. J.
Owen (Eds), CIMNE, Barcelona 7-10 April, 2003
279. Catarina F. Castro, C.A. Conceição António, L.C. Sousa, ‘Inverse methods in hot
forging process optimisation’, VII International Conference on Computational
Plasticity_COMPLAS VII, E. Õnate and D. R. J. Owen (Eds), CIMNE, Barcelona,
7-10 April 2003, pp.152-152, 2003
280. Luisa Costa Sousa, Carlos Conceição António, Catarina Castro, “Optimisation of
Multi-Step Forging operations”, The 6th International ESAFORM Conference on
Material Forming, Sessão de Optimisation of Forming Processes, pp. 131-134,
Salerno, Italy, Universitá di Salerno, ISBN 88-7676-211-6, April, 28-30, 2003
281. J. Ferreira; J. A. T. Barbosa, “Análise de Cascas Rebaixadas Compósitas por um
Método sem Malha e Teoria de Marguerre”, VI Congresso Ibero-Americano de
Engenharia Mecânica-CIBEM6, 15-18 de Outubro de 2003, Coimbra, Portugal,
Sessão Técnica de Mecânica Estrutural III, 2003
282. Paulo Vila Real, L. Silva, Nuno Lopes, Paulo Piloto, “Numerical Modelling of the
Fire Resistance of Steel I-Beams with restrained Thermal Elongation”, ASCE/SFPE
Specialty Conference on Designing Structures for Fire, Baltimore, USA, 30/092/10, pp.247-256,2003
283. Paulo Piloto, Luis Ribeiro Mesquita, Paulo Vila Real, Mário Vaz, “Análise
Experimental da Encurvadura Lateral Torsional de Vigas com Reforços
Transversais”, 3º Congresso Luso-Moçambicano de Engenharia, Vol. 1, Tema CMateriais e Estruturas, pp. 403-412, Maputo, Editores: Joaquim Silva Gomes,
Carlos Conceição António, Clito Félix Afonso, António Santos Matos, ISBN 9729025-62-2, 19-21 de Agosto de 2003
284. Paulo Vila Real, Paulo Piloto, “A Utilização de Métodos Avançados de Cálculo na
Avaliação do Comportamento Termomecânico de Estruturas Metálicas em Situação
de Incêndio”, 3º Congresso Luso-Moçambicano de Engenharia, Vol. 1, Tema CMateriais e Estruturas, pp. 413-424, Maputo, Editores: Joaquim Silva Gomes,
227
285. M. Poursina, Carlos Conceição António, J. Parvizian, Luisa Costa Sousa, Catarina
Castro “Eliminating Folding Defect in Forging parts using a genetic Algoritm”, The
6th International ESAFORM Conference on Material Forming, Sessão de
Optimisation of Forming Processes, pp. 147-150, Salermo, Italy, Universitá di
Salerno, ISBN 88-7676-211-6, April, 28-30, 2003
286. P. Ribeiro, “A Hierarchical finite element for large amplitude vibration of
moderately thick curved beams”, Proc. of the 8th International Conference Structural Dynamics: Recent Advances, England, ed. by M. J. Brennan, M. A. , July
2003
287. P. M. A. Areias, José M. César de Sá, Carlos Conceição António, “Strong
Displacement and Lagrange Multipliers: Finite Displacement Formulations in the
Analysis of Fracture Problems”, International Symposium of Recent Developments
in the Modelling of Rupture in Solids, Brazil, 4-7 Agosto, 2003
288. Lúcia M. J. S. Dinis, “O uso do Maple no Ensino de Plascas e Cascas”, 3º
Congresso Luso-Moçambicano de Engenharia, Vol. 1, Tema A_ensino de
Engenharia, pp. 93-102, Maputo, Editores: Joaquim Silva Gomes, Carlos Conceição
António, Clito Félix Afonso, António Santos Matos, ISBN 972-9025-62-2, 19-21
de Agosto de 2003
289. Elza Fonseca, Francisco Queirós de Melo, Carlos Magalhães de Oliveira,
“Influência da Pressão Interna na Rigidez de Sistemas Tubulares. Desenvolvimento
Numérico”, 3º Congresso Luso-Moçambicano de Engenharia, Vol. 1, Tema CMateriais e Estruturas, pp. 517-528, Maputo, Editores: Joaquim Silva Gomes,
290. Maria Luísa Madureira, Francisco Queirós de Melo, “Uma Formulação Mista para
Análise de Tensões em Tubos Curvos”, 3º Congresso Luso-Moçambicano de
Engenharia, Vol. 1, Tema C-Materiais e Estruturas, pp. 529-538, Maputo, Editores:
Joaquim Silva Gomes, Carlos Conceição António, Clito Félix Afonso, António
Santos Matos, ISBN 972-9025-62-2, 19-21 de Agosto de 2003
291. Ihate, Carlos Conceição António, “Optimização de Estruturas Compósitas com
Laminados Hibrídos usando um Modelo Hierárquico de Pesquisa Evolucionária”, 3º
Congresso Luso-Moçambicano de Engenharia, Vol. 1, Tema C-Materiais e
Estruturas, pp. 551-566, Maputo, Editores: Joaquim Silva Gomes, Carlos Conceição
António, Clito Félix Afonso, António Santos Matos, ISBN 972-9025-62-2, 19-21
de Agosto de 2003
292. J. Paulo Davim, Pedro Reis, Carlos Conceição António, “Estudo Comparativo da
Furação de Laminados Epóxidos Reforçados a Fibras de Carbono (CFRP) usando
brocas Especiais “Brad & Spur” ou brocas Helicoidais”, 3º Congresso LusoMoçambicano de Engenharia, Vol. 2, Tema I-Engenharia e Produção, pp. 10851095, Maputo, Editores: Joaquim Silva Gomes, Carlos Conceição António, Clito
228
Félix Afonso, António Santos Matos, ISBN 972-9025-63-0, 19-21 de Agosto de
2003
293. P. M. Areias, José M. César de Sá, Carlos Conceição António, “Finite Strain
Problems involving Contact”, 3º Congresso Luso-Moçambicano de Engenharia,
Vol. 2, Tema K-Outros Temas de Engenharia, pp. 1537-1566, Maputo, Editores:
Joaquim Silva Gomes, Carlos Conceição António, Clito Félix Afonso, António
Santos Matos, ISBN 972-9025-63-0, 19-21 de Agosto de 2003
294. Carlos C. António, Catarina F. Castro, Luísa Costa Sousa, “Processos de
Enformação Plástica de Metais : Aplicação de Técnicas de Optimização”, in
António Morão Dias, VI Congresso Ibero-Americano de Engenharia MecânicaCIBEM6, Coimbra, Portugal, Sessão Técnica de Processos de Fabricação IX,
Vol.II, pp.1157-1162, 15-18 de Outubro de 2003
295. José M.A. César de Sá & P.M.A. Areias, “Some improvements in modelling of
metal forming processes involving element architecture, contact detection and
damage”, invited lecture in the Advanced School an Workshop on Modelling and
Numerical Simulation in Continuum Mechanics included in the CIM-Centro
Internacional de Matemática Thematic Term in Mathematics and Engineering,
Coimbra, 2003
296. D d'Aulignac, JAC Martins, T Mascarenhas, RM Natal Jorge, EB Pires, “A Shell
Finite Element Model of the Pelvic Floor Muscles”, Proceedings of 6th
International Symposium on Computer Methods in Biomechanics & Biomedical
Engineering, Madrid, Spain, 25-28 de February 2004
297. RAF Valente, RJ Alves de Sousa, M Parente, RM Natal Jorge, JMA César de Sá,
JJA Grácio, “Enhanced strain shell elements for simulation of hydroforming
processes”, Proceedings of 8th International Conference on Numerical Methods in
Industrial Forming Processes, NUMIFORM 2004, Materials Processing and
Design: Modelling, Simulation and Applications, eds. S Ghosh, JM Castro, JK Lee,
Ohio State University, Columbus, Ohio, USA, pp.2234-2239, 13-17 June 2004
298. RJ Alves de Sousa, RPR Cardoso, RAF Valente, Jeong-Whan Yoon, JJA Grácio,
RM Natal Jorge, “Development of a one point quadrature EAS solid-shell element”,
Proceedings of 8th International Conference on Numerical Methods in Industrial
Forming Processes, NUMIFORM 2004, Materials Processing and Design:
Modoling, Simulation and Applications, eds. S Ghosh, JM Castro, JK Lee, Ohio
State University, Columbus, Ohio, USA, pp.2228-2233, 13-17 June 2004
299. RM Natal Jorge, AP Roque, MPL Parente, RAF Valente, AA Fernandes,
“Simulation of tubular hydroforming”, in Proceedings of the Fourth International
Conference on Engineering Computational Technology, B.H.V. Topping and C.A.
Mota Soares, (Editors), Civil-Comp Press, Stirling, United Kingdom, paper 81,
2004
300. MPL Parente, AP Roque, RAF Valente, RM Natal Jorge, RJ Alves de Sousa, JMA
César de Sá, JJA Grácio, “Solid-Shell Finite Elements in Shell Structural Problems:
A Comparative analysis”, in Proceedings of the Seventh International Conference
229
on Computational Structures Technology, B.H.V. Topping and C.A. Mota Soares,
(Editors), Civil-Comp Press, Stirling, United Kingdom, paper 262, 2004
301. AJM Ferreira, CMC Roque, RMN Jorge, "Modelling Cross-Ply Laminated Elastic
Shells by a Higher-Order Theory and Multiquadrics", in Proceedings of the Seventh
International Conference on Computational Structures Technology, BHV Topping
and CA Mota Soares, (Editors), Civil-Comp Press, Stirling, United Kingdom, paper
28, 2004
302. Lucas FM da Silva, RD Adams, "Thermal loads in composite-metal joints", MCM2004, Riga, Latvia, 16-20 May 2004
303. Lucas FM da Silva, RD Adams, "Adhesive joints for low and high temperatures –
joint strength predictions", SAEVII, Bristol, UK, 13-15 July 2004
304. Lucas FM da Silva, RD Adams, "Adhesive joints for low and high temperatures –
experimental validation", SAEVII, Bristol, UK, 13-15 July 2004
305. AMP Jesus, AS Ribeiro, AA Fernandes, "Finite Element Modelling of Fatigue
Damage using a Continuum Damage Mechanics Approach", Pressure Vessel and
Piping Codes and Standards, PVP – Vol. 480, ASME, San Diego, California, GS
Chakrabarti (Editor), pp.3-12, 2004
306. AS Ribeiro, AMP de Jesus, AMV Lima, AJM Ferreira, AA Fernandes,
"Comparison of Mechanical Behaviour of Solid, Laminated and Reinforced
Laminated Beams of Pinus Pinaster and Picea Abies Species", Pre-proceedings of
the Third International Conference of the European Society of Wood Mechanics,
pp. 301-309, September 5-8, UTAD, Vila Real, 2004
307. Kirkham Richard, Alisa Muthena, AP Silva , Grindley Tim, Brondstead Jakob,
"Rethinking Whole Life Cycle Cost Based Decision Making", The Association of
Researchers in Construction Management ARCOM 20th Annual Conference and
Annual General Meeting - The Hariot-Watt University, Edinburgh, UK, 1-3
september 2004
308. Kirkham Richard, Alisa Muthena, AP Silva, Grindley Tim, Brondstead Jakob.
"Eurolifeform: An Integrated Probabilistic Whole Life Cycle Cost and Performance
Model for Buildings and Civil Infrastructure", The International Construction and
Building Research Conference of the Royal Institution of Chartered Surveyors,
Leeds, UK, 7-8 September 2004
309. F Gentil, M Moreira, MPL Parente, RM Natal Jorge, AM Ferreira, E Almeida,
"Ouvido médio: um estudo biomecânico", Métodos Computacionais em
Engenharia, C Mota Soares et. al, Lisboa, CD-Rom, Livro de Resumos, pp.48, 31
May 2 June 2004
310. JT Barbosa, RM Natal Jorge, PMA Areias,AA Fernandes, T Mascarenhas, M
Oliveira, B Patrício, "Análise experimental e por elementos finitos da elasticidade
da pele humana", Métodos Computacionais em Engenharia, C Mota Soares et. al,
Lisboa, CD-Rom, Livro de Resumos, pp.58, 31 May 2 June 2004
311. MPL Parente, RM Natal Jorge, RAF Valente, "Utilização dos elementos MITC4 e
S4E6P7 em materiais com anisotropia plástica", Métodos Computacionais em
230
Engenharia, C Mota Soares et. al, Lisboa, CD-Rom, Livro de Resumos, pp.78, 31
May 2 June 2004
"Utilização de elementos do tipo «casca» e «sólido-casca» com extensões
acrescentadas para problemas elasto-plásticos com grandes deformações", Métodos
Computacionais em Engenharia, C Mota Soares et. al, Lisboa, CD-Rom, Livro de
Resumos, pp.79, 31 May 2 June 2004
313. AMP de Jesus, A Silva Ribeiro, AA Fernandes."Derivation os S-N curves for
Fatigue Assessment of Steel Pressure Vessels", 9th Portuguese Conference on
Fracture, Setúbal, 18-20 Febreuary 2004
314. Jorge Almeida, Pedro Portela, Maria Teresa Restivo, José Couto Marques,
"Complementary Learning Through Multidisciplinarity in Engineering Education",
Proceedings of World Congress on Engineering and Technology Education,
WCETE'2004, pag.270-273, Brazil, March 2004
315. Maria Teresa Restivo, Fernando Gomes Almeida, Maria de Fátima Chouzal,
Joaquim Gabriel Mendes, António Mendes Lopes, João Pedro Carneiro and Helena
Sofia Lopes, "On the Way for a Better Methodology in Teaching/Learning
Instrumentation for Measurements at Mechanical Engineering Compulsory
Syllabus", Proc. of the World Congress on Engineering and Technology Education,
WCETE’2004, Brazil, March 2004
316. Maria Teresa Restivo, Joaquim Gabriel Mendes, "A Remote Laboratory @ Feup –
First Steps", Proceedings of World Congress on Engineering and Technology
Education, WCETE'2004, pag.97-100, Brazil, March 2004
317. A Marques, J Mendes, M Ribeiro, MA Vaz, "Shear Forces in Thickness-mode
Piezoelectric Ceramic Plates", BIOEVORA, II Congresso Ibérico de Biomateriais,
2004
318. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, “Hexapod Control
Through a Fractional Algorithm”, FDA’2004 - Fractional Differentiation and its
Applications, Bordeaux, France, 19-21 Jul. 2004
319. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2004, “Gait Selection
for Quadruped and Hexapod Walking Systems”, ICCC’2004 - IEEE International
Conference on Computational Cybernetics, , Vien, Austria, 30 Aug. - 1 Set. 2004
320. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2004, “Integer vs.
Fractional Order Control of a Hexapod Robot”, Climbing and Walking Robots,
Manuel A. Armada and Pablo Gonzaléz de Santos (Eds.), Springer, ISBN 3-54022992-2, November 2004
321. M. Santos, F. Vasques, M. Stemmer, “Design of Network Control Systems –
CAN”. In VI IEEE International Conference on Industrial Applications
(INDUSCON’04), Joinville, Brazil, 2004
322. M. Santos, F. Vasques, M. Stemmer, “Design of Network Control Systems - Token
Passing” In VI IEEE International Conference on Industrial Applications
(INDUSCON’04), Joinville, Brazil, 2004
231
323. Santos, P. Almeida, M. V. Martins, N. Matela, N. Oliveira, N. C. Ferreira, J. D.
Aguiar, F. G. de Almeida, F. Lopes, J. Sampaio, P. Bento, F. Gonçalves, C. Leong,
L. Silva, I. C. Teixeira, J. P. Teixeira, M. C. Abreu, B. Carriço, P. R. Mendes, R.
Moura, C. Ortigão, L. Peralta, R. Ribeiro, P. Rodrigues, A. Trindade, J. Varela,
“Design and Evaluation of the Clear-PEM Detector for Positron Emission
Mammography”, IEEE-Nuclear Science Symposium/Medical Imaging Conference,
Rome, October 2004
324. Lia Patrício, J. Falcão e Cunha, Raymond Fisk, Nuno Jardim Nunes: Designing
interaction experiences for multi-platform service provision with essential use
cases, in Proceedings of the 2004 International Conference on Intelligent User
Interfaces, ACM Proceedings, Jean Vanderdonckt, Nuno Jardim Nunes, Charles
Rich (eds.), New York: ACM, 2004, 379 pp., ISBN 1-58113-815-6, p. 298-300,
2004
325. Henriqueta Nóvoa, Miguel Fernandes, Nuno Ramos, J. Falcão e Cunha: Towards a
Global Integration of the Portuguese Wine Cluster Information – the INFOVINI
project, accepted for presentation in eChallenges 2004, 27 - 29 October 2004,
Vienna, Austria; accepted for publication in the Proceedings to be published by IOS
Press, 2004
326. AS Camanho, RG Dyson, "The assessment of cost efficiency allowing for
adjustments to input prices", in Proceedings of the International DEA Symposium
2004, pp. 381-387, A Emrouznejad, V Podinovski (eds), Universidade de Aston,
Birmingham, UK, 2004.
327. C Vaz, AS Camanho, "Performance measurement in retailing organisations using
DEA", Annual Conference of the Association of European Operational Research
Societies -- EURO XX, Rhodea, Greece, July, 2004
328. AS Camanho, RG Dyson, "Cost efficiency measurement with price uncertainty",
Annual Conference of the Association of European Operational Research Societies
-- EURO XX, Rhodes, Greece, July, 2004
329. A Oliveira, S Varga, "CFD Simulation of Fluid Flow in an Electrogasdynamic
Power Converter", Proceedings HPC’04 (3rd Int. Conf. on Heat Powered Cycles),
Chipre, 2004
330. A Oliveira, S Varga, "Indirect Assessment of Electrogasdynamic Power Conversion
Using CFD", Proceedings IC-SCCE (1st Int. Conf. From Scientific Computing to
Computation Engineering), Atenas, 2004
331. A Oliveira, J Facão, "Analysis of a plate heat pipe solar collector", Proceedings
SET2004 Conference (2nd Int. Conf. on Sustainable Energy Technologies),
Nottingham, 2004
332. A Oliveira, A Palmero, "Experimental Testing of an Integrated Solar Louvre
Collector", Proceedings SET2004 Conference (2nd Int. Conf. on Sustainable Energy
Technologies), Nottingham, 2004
333. Catarina Castro, Luísa Costa Sousa, Carlos Alberto Conceição António,
"Eliminação de defeitos de fabrico na conformação plástica usando simulação e
232
optimização", in Carlos Soares, António Batista, G. Bugeda, Manuel Casteleiro,
J.M. Goicolea, João Martins, Carlos Pina, Helder Rodrigues, Actas do CMCE2004 Congresso de Métodos Computacionais em Engenharia, pp.444-444, 2004
334. Carlos Alberto Conceição António, "Algoritmo genético hierárquico com estrutura
etária e controle de diversidade", in Carlos Soares, António Batista, G. Bugeda,
Manuel Casteleiro, J.M. Goicolea, João Martins, Carlos Pina, Helder Rodrigues,
Actas do CMCE2004 - Congresso de Métodos Computacionais em Engenharia,
pp.443-443, 2004
335. Carlos Alberto Conceição António, "Um modelo híbrido para análise da fiabilidade
dos compósitos estruturais", in Carlos Soares, António Batista, G. Bugeda, Manuel
Casteleiro, J.M. Goicolea, João Martins, Carlos Pina, Helder Rodrigues, Actas do
CMCE2004 - Congresso de Métodos Computacionais em Engenharia, pp.285-285,
2004
336. Luísa Costa Sousa, Catarina Castro, Carlos Alberto Conceição António, "Estudo da
geometria das ferramentas em processos de enformação de chapa", in Carlos
Soares, António Batista, G. Bugeda, Manuel Casteleiro, J.M. Goicolea, João
Martins, Carlos Pina, Helder Rodrigues, Actas do CMCE2004 - Congresso de
Métodos Computacionais em Engenharia, pp.74-74, 2004
337. P Ribeiro "Comparison of methods of studying the stability of soultions of nonlinear systems", 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece,
Book of abstracts (abstract)
338. E Manoach, P Ribeiro, "Coupled, Thermoelastic, Large Amplitude Vibrations of
Timoshenko Beams", 5th Euromech Solid Mechanics Conference, Thessaloniki,
Greece, Book of abstracts (abstract)
339. P Ribeiro, "Forced Non-linear Vibration of Cylindrical Laminated Shells by the pversion Finite Element Method", 45th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics & Materials Conference, Paper Number: AIAA-2004-1865,
2004
340. P Ribeiro, "Non-linear modes of cylindrical shells", in Proceddings of Euromech
457, Non Linear Modes of Vibrating Systems, Eds. S. Bellizi, B. Cochelin, C.-H.
Lamarque, 3-6, 2004
341. P Ribeiro, "Experimental analysis of modal interactions in the non-linear vibrations
of a plate", 21st International Congress of Theoretical and Applied Mechanics
(ICTAM04), Warsaw, 2004
342. RP Duarte, P Ribeiro, "Time domain analysis of geometrically nonlinear vibrations
of composite laminated plates by the hierarchical finite element method", Seventh
International Conference on Computational Structures Technology (CST2004),
Lisbon, 2004
343. P Ribeiro, "Modal Interactions in Shallow Arches", Seventh International
Conference on Computational Structures Technology (CST2004), Lisbon, 2004
233
344. P Ribeiro, R Lopes Alonso, "Frequency domain analysis of geometrically nonlinear
vibrations of 3D beams", Seventh International Conference on Computational
Structures Technology (CST2004), Lisbon, 2004
1.
A Silva Ribeiro, JD Moreira da Costa, AA Fernandes, "Comportamento à Fadiga de
Juntas Soldadas de Alumínio Al 6061-T651", 3° Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Associação Portuguesa de
Análise Experimental de Tensões (APAET), Porto, Resumos das Comunicações, JF
Silva Gomes, (Editor), pp.51-52, March 24-26,1999
2.
LFM Silva, JL Esteves, MAP Vaz, "Estudo de uma Ligação Adesiva Topo a Topo
entre dois Materiais com Módulos de Elasticidade Diferentes", 3º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental,
Associação Portuguesa de Análise Experimental de Tensões (APAET), Porto,
Resumos das Comunicações, JF Silva Gomes, (Editor), pp.7-8, March, 24–26,1999
3.
MFSF de Moura, JPM Gonçalves, AT Marques, PMST de Castro, "Aplicação dum
Critério de Modo Misto ao Estudo de Solicitações de Compressão Após Impacto
em Compósitos de Carbono-Epóxido", 3º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Associação Portuguesa de
Análise Experimental de Tensões (APAET), Porto, Resumos das Comunicações, JF
Silva Gomes, (Editor), pp.43-44, March 24-26, 1999
4.
LFM Silva, JP Gonçalves, FMF Oliveira, PMST de Castro, "O Ensaio de Juntas
Rebitadas de Estruturas de Aviões", 3º Encontro Nacional de Análise Experimental
de Tensões e Mecânica Experimental, Associação Portuguesa de Análise
Experimental de Tensões (APAET), Porto, Resumos das Comunicações, JF Silva
Gomes, (Editor), pp.45-46, March 24-26, 1999
5.
M. Feki, E. Richard, F. Gomes de Almeida, “Comande en Effort d’un Vérin
Hydraulique par Linéarisation Entrée/Sortie”, Proc. of Journées Doctorales
d’Automatiques, JDA’99, pp. 181-184, Nancy, France, Sep. 1999
6.
J. Falcão e Cunha, A. Duarte Silva, Henriqueta Nóvoa: Modelos de Negócio na
Internet-Telecomércio, apres. Convidada: Ciclo de Conferências da 2ª SEICSemana da Electrónica, Instrumentação e Computação: “Tecnologias da Informação
e Comunicação”, UTAD, Hotel Miracorgo, Vila Real, 1999.04.20, 1999
7.
J. Falcão e Cunha, Henriqueta Nóvoa, A. Duarte Silva: Introdução ao Comércio
Electrónico e Modelos de Comércio Electrónico para as PME, apres. Convidadas:
Jornadas de Informática da UMa, Funchal, 1999.09.23-24, 1999
8.
J. Falcão e Cunha, Henriqueta Nóvoa, A. Duarte Silva: Introdução à Internet e ao
Comércio Electrónico, apres. Convidada: Jornadas “A Internet, o Comércio
Electrónico e as PME da Construção Civil”, organizadas pela AICCOPN Associação dos Industriais da Construção Civil e Obras Públicas do Norte, Porto,
1999.09.27, 1999
234
9.
A Oliveira, C Afonso, A Silva, S Varga, "Ciclos Frigoríficos Dessicantes Para o
Condicionamento de Ar", Proc.1º Congresso Luso-Moçambicano de Engenharia,
Maputo 1999
10. J. M. Ferreira, A. T. Marques, J. César de Sá e J. A. T. Barbosa, “Validação
Experimental de Modelos de Cálculo de Estruturas Sandwich”, 3º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental, Porto,
Portugal, 39-40. Editado por J. F. Silva Gomes, APAET - Associação Portuguesa de
Análise Experimental de Tensões, 24-26 de Março de 1999
11. J. M. Ferreira, J. T. Barbosa, A. T. Marques e J. C. de Sá, “Comportamento
Instável de Estruturas Tipo Casca em Materiais Compósitos”, 3º Encontro
Portugal, 33-34. Editado por J. F. Silva Gomes, APAET - Associação Portuguesa de
Análise Experimental de Tensões, 24-26 de Março de 1999
12. PMM Vila Real, PAG Piloto, J-M Franssen, "Modelação Numérica da
Encurvadura Lateral de Vigas I Metálicas Sujeitas à Acção do Fogo", comunicação
apresentada no II Encontro Nacional de Construção Metálica e Mista, Coimbra,
Universidade de Coimbra, pp.657-666, 18 a 19 de Novembro de 1999
13. PMM Vila Real, PAG Piloto, "A Utilização de Métodos Avançados no Cálculo de
uma Estrutura Metálica em Situação de Incêndio", comunicação apresentada no II
Encontro Nacional de Construção Metálica e Mista, Coimbra, Universidade de
Coimbra, pp.667-678, 18 a 19 de Novembro de 1999
14. RM Natal Jorge, JMA César de Sá, CMB Reis Gomes, "Análise de Problemas
Incompressíveis com Base no Método B-Barra e no Método da Integração Reduzida
Selectiva", VI Congresso Nacional de Mecânica Aplicada e Computacional,
Universidade de Aveiro, Aveiro, pp.1111-1120, April 17-19, 2000
15. RF Valente, CMBR Gomes, "Simulação de estruturas tipo casca de espessura fina,
com ênfase num comportamento não linear material e dinâmico", VI Congresso
Nacional de Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro,
April 17-19, 2000
16. C Costa e Silva, JMA César de Sá, RM Natal Jorge, RPR Cardoso, "Simulação de
Processos de Enformação de Vidro e Cálculo de Tensões Térmicas", VI Congresso
Nacional de Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro,
pp.1111-1120, April 17-19, 2000
17. PMA Areias, JMA César de Sá, RM Natal Jorge, "Novos Elementos Bilineares na
Análise de Deformação Finita em Elastoplasticidade", VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, pp.665-673,
April 17-19, 2000
18. RM Guedes, MAP Vaz, PP Camanho, "Estudo da Fluência em Betões Poliméricos",
VI Congresso Nacional de Mecânica Aplicada e Computacional, Universidade de
Aveiro, Aveiro, pp.501-507, April 17-19, 2000
19. MFSF Moura, JPM Gonçalves, AT Marques, PMST de Castro, "Previsão da
Resistência à Compressão de Laminados de Carbono-Epóxido Contendo
235
Delaminagem Provocada por Impacto a Baixa Velocidade", VI Congresso Nacional
de Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, pp.491499, April 17-19, 2000
20. AJM Ferreira, PP Camanho, AT Marques, AA Fernandes, "Comportamento de
Betões Reforçados com Varões de Materiais Compósitos", VI Congresso Nacional
de Mecânica Aplicada e Computacional, Universidade de Aveiro, Aveiro, pp.323332, April 17-19, 2000
21. RM Natal Jorge, JA Guedes, AA Fernandes, "Projecto de um Autoclave pelo
Método dos Elementos Finitos", 2º Encontro Nacional do Colégio de Engenharia
Mecânica, Coimbra, pp.1.35-1.43,Dec 15-16, 2000
22. JPM Gonçalves, MFSF Moura, PMST de Castro, AT Marques, "Estudo da
Propagação de Dano em Modo I, Modo II e Modo Misto em Interface Usando
Elementos Finitos de Interface com Restrição Ponto-Superficie", 7as Jornadas de
Fractura, UBI, Covilhã, pp.64-71, Feb 16-18, 2000
23. A Balacó de Morais, AT Marques, PMST de Castro, "Estudo da Aplicação de
Ensaios de Fractura Interlaminar de Modo I a Laminados Compósitos
Multidireccionais", 7as Jornadas de Fractura, UBI, Covilhã, pp.90-95, Feb 16-18,
2000
24. AMP de Jesus, AS Ribeiro, A Portela, PMST de Castro, AA Fernandes, "Estimativa
das Fases de Iniciação e Propagação de Defeitos em Componentes Estruturais", 7as
Jornadas de Fractura, Covilhã, pp.260-269, Feb 16-18, 2000
25. MV Figueiredo, FMF Oliveira, JPM Gonçalves, PMST de Castro, AA Fernandes,
"Análise das Causas de Fractura de um Garfo de Empilhador", 7as Jornadas de
Fractura, UBI, Covilhã, pp.276-281, Feb 16-18, 2000
26. PP Camanho, FL Matthews, "Simulação da Progressão de Dano e Fractura de
Ligações Aparafusadas em Materiais Compósitos", 7as Jornadas de Fractura, UBI,
Covilhã, pp.84-89, Feb 16-18, 2000
27. Sousa, J. F., "A Cultura Ambiental: Elemento Indispensável em Matéria de Política
Empresarial e Social - O Caso dos Transportes", in the CD-ROM Proceedings of
the XIII Congresso da Ordem dos Engenheiros sobre Engenharia e Cultura, Porto,
2000
28. José Sarsfield Cabral, H Alvelos, “O Problema do Controlo da Qualidade em
Processos não Convencionais: o Caso da Câmara de Provadores do Instituto do
Vinho do Porto”, 1º Congresso Nacional da Qualidade, Lisboa, 2000
29. José Sarsfield Cabral, L Ribeiro, F Alba, “Uma Experiência de Benchmarking na
Indústria Metalomecânica”, 1º Congresso Nacional da Qualidade, Lisboa, 2000
30. J. Trigo Barbosa, Lúcia S. Dinis, “Análise Transitória de Cascas Reforçadas
Usando um Algoritmo de Integração Explícito”., Actas do VI Congresso Nacional
de Mecânica Aplicada e Computacional, Universidade de Aveiro e Associação
Portuguesa de Mecânica Teórica, Aplicada e Computacional, Vol.1, 705-714, 17-19
de Abril 2000
236
31. J. Trigo Barbosa, Lúcia S. Dinis, “Análise Não Linear de Cascas Reforçadas
Usando uma Formulação Degenerada de Casca”, Actas do VI Congresso Nacional
de Mecânica Aplicada e Computacional, Universidade de Aveiro e Associação
Portuguesa de Mecânica Teórica, Aplicada e Computacional, Vol.1, 695-704, 17-19
de Abril 2000
32. Maria Luísa Madureira, Francisco Q. de Melo, “Uma solução variacional para
análise da deformação de um tubo de paredes finas sob a acção de forças de bordo
utilizando formulação mista”, Actas do VI Congresso Nacional de Mecânica
Aplicada e Computacional, Universidade de Aveiro e Associação Portuguesa de
Mecânica Teórica, Aplicada e Computacional, 17-19 de Abril 2000
33. Fonseca, Elza, M. M.; Oliveira, Carlos M., “Análise Termo-Mecânica de Estruturas
Tridimensionais. Desenvolvimento de Elementos de Interface para Imposição de
Condições Fronteira”, Actas do VI Congresso Nacional de Mecânica Aplicada e
Computacional, Universidade de Aveiro e Associação Portuguesa de Mecânica
Teórica, Aplicada e Computacional, 17-19 de Abril 2000
34. C.A. Conceição António, “Um modelo para a pesquisa do MPP global na análise
da fiabillidade estrutural dos compósitos., Actas do VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro e Associação
Portuguesa de Mecânica Teórica, Aplicada e Computacional, 17-19 de Abril 2000
35. C.A. Conceição António & Paulo Davim, J., “Optimização das condições de corte
baseada em acabamento superficial obtido em torneamento e em pesquisa
genética”, Actas do VI Congresso Nacional de Mecânica Aplicada e
36. Catarina F. Castro, Luisa Costa Sousa, C.A. Conceição António, J. César de Sá,
Modelo de Simulação Numérica para o Forjamento incluindo os efeitos Térmicos”,
Actas do VI Congresso Nacional de Mecânica Aplicada e Computacional,
Universidade de Aveiro e Associação Portuguesa de Mecânica Teórica, Aplicada e
Computacional, 17-19 de Abril 2000
37. Luisa Costa Sousa, Francisco Pires, Abel Dias Santos, J. César de Sá, “Processos
de enformação plástica de metais: Desenvolvimento de algoritmos de optimização
usando t.”, Actas do VI Congresso Nacional de Mecânica Aplicada e
38. Catarina F. Castro, Luisa Costa Sousa, C.A. Conceição António, J. César de Sá,
“Processos de Enformação Plástica de Metais: Desenvolvimento de Algorítmos de
Optimização usando uma Técnica inversa”, Actas do VI Congresso Nacional de
Mecânica Aplicada e Computacional, Universidade de Aveiro e Associação
Portuguesa de Mecânica Teórica, Aplicada e Computacional, 17-19 de Abril 2000
39. Piloto, P. A. G.; Vila Real, P. M. M., “Modelação pelo MEF da Encurvadura
lateral de Vigas I Metálicas sujeitas a elevadas Temperaturas”, Actas do VI
Congresso Nacional de Mecânica Aplicada e Computacional, pp.1121-1130,
Universidade de Aveiro, ISBN – 972-8021-61-5, 17-19 de Abril 2000
237
40. M. R. P. Castro, R. M. Delgado & J. M. A. C. Sá, “Verificação da segurança em
estruturas com comportamento não linear através de factores parciais”, Encontro
Nacional de Betão Estrutural, Porto, Portugal, Novembro 2000
41. Conceição António, C.A. e Catarina F. Castro, “Optimização de estruturas e
processos de fabrico em engenharia mecânica”, Actas do 2º Encontro Nacional do
Colégio de Engenharia Mecânica, Ordem dos Engenheiros Região Centro, 15-16
Dezembro, Coimbra, pp.3.41-3.51, 2000
42. AMP de Jesus, AS Ribeiro, AA Fernandes, "Utilização da Mecânica do Dano na
Modelação Numérica da Fadiga em Componentes Estruturais", poster presented at
III Jornadas do ICETA-UTAD, published in proceedings of III Jornadas do ICETAUTAD, Vila Real, November 26-27, 2001
43. JO Carneiro, FJMQ de Melo, "Análise de Estruturas Usando Técnicas Pseudo Dinâmicas", 2as Jornadas do Grupo de Revestimentos Funcionais, Universidade do
Minho, pp31 – 38, Dec 2001
44. JO Carneiro, JT Pereira, AJ Rocha, FJQ de Melo, "Validação Estrutural de Bancos
Automóveis Usando Técnicas Pseudo-Dinâmicas", Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Bragança, Oct 2001
45. Luís Miguel Pinho, Francisco Vasques, “Atomic Multicast Protocols for Reliable
CAN Communication”, in Anais do 19º Simpósio Brasileiro em Redes de
Computadores (SBRC’2001), Florianópolis, Brazil, pp.194-209, Mai 2001
Technologies in a Civil Construction SME and Assessment of its Impact; IBIC
2001 – Internet Business and the Industry of Construction, Europarque, Porto,
2001.11.15-16, 2001
47. Gaudêncio Freires, J. Falcão e Cunha, Henriqueta Nóvoa: A Draft Plan to help
SMEs to Adopt Standards in their Internet Business Activities; apres.: IBIC 2001 –
Internet Business and the Industry of Construction, Europarque, Porto, 2001.11.1516, 2001
48. JS Cabral, L Ribeiro, “Em Busca das Melhores Práticas na Indústria de Fundição”,
Proceedings do 11º Colóquio da Associação Portuguesa de Fundição: A Indústria
de Fundição Face à Globalização dos Mercados, Porto, 2001
49. MTSD Vasconcelos, EO Oliveira Fernandes, GV Silva, "Emissões de compostos
orgânicos voláteis por materiais de construção e a qualidade do ar interior", In Livro
de Actas Conferência Ibérica sobre Protecção ambiental, Instituto Piaget, Viseu,
79, 2001
50. A Oliveira, C Afonso, A Silva, S Varga, "Iluminação e Ventilação Natural em
Edifícios Fazendo Recurso a Tubos de Luz Ventilados", Proc. 2º Congresso LusoMoçambicano de Engenharia, Maputo 2001
51. A Oliveira, J Matos, C Afonso, "Sistema Híbrido para a Produção de Electricidade,
Calor e Frio: Resultados Experimentais", Iªs Jornadas Técnicas de Primavera da
Efriarc: Climatização & Refrigeração em Portugal, Porto, 2001
238
52. António, C.A. Conceição, Dourado, N.M.; “Optimization of metal forming
processes using a genetic algorithm”, Optimization 2001, Universidade de Aveiro,
2001, organized by APDIO Sociedade Portuguesa de Desenvolvimento e
Investigação Operacional e da SPM Sociedade Portuguesa de Matemática, 23-25
July, 2001
53. Lapa, Vitor; Davim, J. Paulo and António, C. Conceição; “Influência do Reforço
(30% de Fibras de Vidro) em Operações de Maquinagem no PEEK - Estudo
Preliminar”, 4º Encontro Nacional de Análise Experimental de Tensões e Mecânica
Experimental, Bragança 17 a 19 de Outubro, pp.109-110, 2001
54. Vila Real, P.M.M.; Cazeli, Ronisi; Silva, L. Simões and Piloto, P.A.G.; “Estudo
Numérico da Influência das Tensões Residuais na Encurvadura Lateral de Vigas I
Metálicas em Situação de Incêndio”, III Encontro de Construção Metálica e Mista,
Aveiro 6 a 7 de Dezembro, Universidade de Aveiro, 2001
55. Vila Real, P.M.M.; Piloto, P.A.G. and Gil, Carlos; “Cálculo da Resistência ao Fogo
de uma Asna Metálica”, III Encontro de Construção Metálica e Mista, Aveiro 6 a 7
de Dezembro, Universidade de Aveiro, 2001
56. Vila Real, P.M.M.; Piloto, P.A.G. and Vaz, M.A.P.; “Influência das Condições de
Apoio na Encurvadura Lateral de Vigas Metálicas: Análise Experimental e
Numérica”, 4º Encontro Nacional de Análise Experimental de Tensões e Mecânica
Experimental, Bragança 17 a 19 de Outubro, 2001
57. Xavier, J.C.; Dourado, N.M.; Morais, J.L. and António, C. Conceição;
“Identification of Elastic Properties of Orthotropic Materials Using Evolutionary
Algorithms”, 4º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Bragança 17 a 19 de Outubro, pp.71-72, 2001
58. Fonseca, Elza M. M.; Mesquita, L.; Caleiro, C.; Lopes, H. and Vaz, M.;
“Determinação do Factor Concentração de Tensões em Placas Utilizando a
Extensometria com Validação Numérica”, 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Bragança 17 a 19 de Outubro,
2001
59. Fonseca, Elza M.M.; Oliveira, Carlos A.M. and Melo, F.Q. “Validação
Experimental de um Modelo Teórico para Cálculo de Elevados Gradientes
Térmicos em Estruturas de Parede Fina”, 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Bragança 17 a 19 de Outubro,
2001
60. Max M. Santos, Marcelo R. Stemmer, Francisco Vasques, “Uma Rede CAN
Aplicada ao Controle de uma Aeronave Não Tripulada - O Helicóptero HELIX”, in
“Anais do XIV Congresso Brasileiro de Automática” (CBA'02), Natal, Brazil,
September 2002
61. Max M. Santos, Marcelo R. Stemmer, Francisco Vasques, “Análise de
Escalonabilidade de Mensagens em uma Rede CAN Aplicada a uma Aeronave Não
Tripulada”, in “Anais do IV Worshop de Tempo-Real” (WTR'02), Búzios, Brazil,
May 2002
239
62. Henriqueta Nóvoa, António Amador, J. Falcão e Cunha: Endogeneização de
Tecnologias Internet numa Empresa de Construção Civil – o caso AMMnet, Actas
das 8as Jornadas de Construções Civis – Tecnologias da Informação na
Construção, GEQUALTEC – Grupo de Estudos de Gestão, Qualidade e
Tecnologias da Construção (ed.), FEUP, 2002.07.08, pp. 45-71, ISBN: 972-815758-4, 2002
63. Henriqueta Nóvoa: Utilização da Internet no Sector Vitivinícola: Oportunidades e
Desafios, apresentação convidada, III Conferência da Revista de Vinhos,
Alfândega, Porto, 2002.06.28, 2002
64. Henriqueta Nóvoa: Practical modeling requirements: Regional Meeting – “Future
Modelling Needs in Emerging Collaborative Networks” do projecto IST-200029478 “Thinking network of experts on emerging smart organizations”, Lisboa,
2002.07.19, 2002
65. José Sarsfield Cabral, “Algumas Reflexões Sobre o Conceito de Qualidade”. V
Simpósio sobre Comportamento Organizacional, Associação Portuguesa de
Psicologia, Universidade do Minho, 2002
66. JS Cabral, I Miranda, “O Desafio da Educação Contínua no Contexto das
Organizações Universitárias”, Proceedings do V Simpósio sobre Comportamento
Organizacional, Universidade do Minho, 2002
67. A Oliveira, J Facão, "Comportamento Térmico de um Colector Solar Híbrido para
Aplicação a Sistemas de Cogeração de Pequena Escala", Proc. XI Congresso
Ibérico e VI Iberoamericano de Energia Solar, ISES, Vilamoura 2002
68. A Oliveira, A Palmero, "Simulação Energética de um Colector Solar Integrado
num Sombreador Para Utilização em Edifícios", Proc. XI Congresso Ibérico e VI
Iberoamericano de Energia Solar, ISES, Vilamoura 2002
69. P.M.M Vila Real., P.A.G Piloto. ”Da Investigação à Apresentação ao EC3 de uma
nova proposta de Cálculo Simples da Resistência à Encurvadura Lateral de Vigas
Metálicas Sujeitas à Acção Do Fogo”, Congresso Nacional de Engenharia de
Estruturas – Os novos desafios na qualidade das obras, pp. 127-138; Lisboa, LNEC,
10-13 July 2002
70. Luisa Costa Sousa, “Métodos Variacionais na resolução do problema de
Contacto”, Novos Desenvolvimentos da Tribologia: Análise Teórica e Aplicações
em Processos Industriais, 8as Jornadas Portuguesas de Tribologia, Aveiro, Portugal,
Eds. José Grácio, Paulo Davim, Qi wua Fan e Nasar Ali, Universidade de Aveiro,
pp. 309-213 ISBN 972-789-059-8, 7-9, May, 2002
71. Vitor Lapa, Paulo Davim, C.A. Conceição António, Desempenho do material da
ferramenta de corte na maquinagem de PEEK reforçado com 30% de fibras de
vidro, in 8as Jornadas Portuguesas de Tribologia, Novos Desenvolvimentos da
Tribologia: Análise Teórica e Aplicações em Processos Industriais, pp.227-230,
2002
72. PMST de Castro, ÞD Pastrama, "Approximate determination of stress intensity
factors for through cracks starting from three adjacent rivet holes", Proceedings of
240
the ninth national symposium on fracture mechanics, Romania, Sibiu - Medias,
pp.A13-A18, Oct 31-Nov 1, 2003
73. MPL Parente, RM Natal Jorge, RAF Valente, JMA César de Sá "Simulação
numérica de hidroformagem incluindo anisotropia", VII Congresso Nacional de
Mecânica Aplicada e Computacional, University of de Évora, Évora, 14-16 April
2003
74. RJA de Sousa, RM Natal Jorge, RAF Valente, JMA César de Sá “Análise de
problemas elasto-plásticos 3D utilizando o método das deformações acrescentadas”,
VII Congresso Nacional de Mecânica Aplicada e Computacional, University of de
Évora, Évora, 14-16 April 2003
“Desenvolvimento de elementos do tipo casca para aplicações com grandes
rotações em regime elasto-plástico”, VII Congresso Nacional de Mecânica
Aplicada e Computacional, University of de Évora, Évora, 14-16 April 2003
76.
RM Natal Jorge, "O Método dos Elementos Finitos: Aplicações e Recentes
Desenvolvimentos", palestra proferida na Escola Superior de Tecnologia e de
Gestão do Instituto Politécnico de Bragança, no Dia da Engenharia Mecânica
integrado na VII Semana das Engenharias, 31 Mars 4 April 2003
77. PFP Matos, PMGP Moreira, PMST de Castro, "Análise de placas fendidas pelo
método de elementos de fronteira dual: implementação em pós-processamento das
equações de Williams", VIII Congresso de Mecânica Aplicada e Computacional,
Universidade de Évora, Vol.IV, pp.1865-1874, 14-16 April 2003
78. AB Morais, MF Moura, AT Marques, PMST de Castro, "Fractura interlaminar em
modo I de comósitos carbono/epóxido do tipo [0o/90o]", VIII Congresso de
Mecânica Aplicada e Computacional, Universidade de Évora, Vol I, pp.467-474,
14-16 Abril 2003
79. JAO Simões, J Aston, PMST de Castro, AT Marques, "O programa de mestrado em
Design Industrial e projectos desenvolvidos por alunos", Congresso User Design,
Lisboa, March 27-30, 2003
80. JC Xavier, JM Oliveira, JL Morais, PP Camanho, F Pierron, "Measurement of the
shear modulus of wood Pinus Pinaster Ait. by the Iosipescu test", VII Congresso
Nacional de Mecânica Aplicada e Computacional, Universidade de Évora, 2003
81. Joaquim Mendes, Maria Teresa Restivo, Carlos Moreira da Silva e Jorge Manuel
Reis, “Reaproveitamento de Equipamentos Obsoletos no Desenvolvimento de um
Sistema de Medição Dimensional para Apoio ao Ensino da Engenharia”, included
in the CD ROM “Reflectir Bolonha: Reformar o Ensino Superior. Um arquivo
documental sobre a construção do Espaço Europeu de Ensino Superior”, University
of Porto, ISBN972-8025-22-X, July 2003
82. L. Pinho, F. Vasques, “Supporting Networked Control Systems: Assessment of the
CAN Protocol Considering Periods of Network Inaccessibility”, in Proc. of the XXI
Simpósio Brasileiro de Redes de Computadores (SBRC2003), May 19-23, Natal,
Brazil, 2003
241
83. F. Ataíde, M. Santos, F. Vasques, M. Stemmer, “O Impacto do Atraso na
Comunicação de Sistema de Controle via Redes”, In Proc. of the 3rd Congresso
Brasileiro de Computação (CBCOMP-03), Itajaí-SC, 2003
84. José Borges, “A Markov Model for Web Usage Mining”. JOCLAD 2003 - X
Jornadas de Classificação e Análise de Dados, Universidade de Aveiro, 10-12
April, 2003
85. JS Cabral, G Beirão, “A Qualidade em Serviços de Transporte Público Urbano: O
Problema da Contratualização”, In Special Edition of FER XXI, 4º Congresso
Nacional do Transporte Ferroviário, Vol. 1, pp. 102-105, Lisboa, 2003
86. A Oliveira, J Matos, C Afonso, "O Comportamento Térmico de um Frigorífico
Doméstico", Proc. 3º Congresso Luso-Moçambicano de Engenharia, Maputo 2003
87. P. M. A. Areias, José César de Sá, Carlos Conceição António, “A second Order
Approach for contact Between Deformable Solids”, VII Congresso de Mecânica
Aplicada e Computacional, Vol. I_ Mecânica dos Sólidos e Estrutural, pp. 65-74,
ISBN 972-778-058-X, Universidade de Évora, 14-16 April, 2003
88. Carlos Conceição António, “Algorítmos Genéticos Adaptativos: Aplicação na
Optimização Estrutural”, VII Congresso de Mecânica Aplicada e Computacional,
Vol. I, Vol. I-Mecânica dos Sólidos e Estrutural, pp. 75-84, ISBN 972-778-058-X,
Universidade de Évora, 14-16 April, 2003
89. Victor Lapa, João Paulo Davim, Carlos Conceição António, “Análise Experimental
da Modelização do Corte Ortogonal do PEEK com e sem reforço de Fibras de
Vidro”, VII Congresso de Mecânica Aplicada e Computacional, Vol. I-Mecânica
dos Sólidos e Estrutural, pp. 137-144, ISBN 972-778-058-X, Universidade de
Évora, 14-16 April, 2003
90. P.A.G. Piloto, Luis Mesquita, Paulo Vila Real, Mário Vaz, “Encurvadura Lateral
Torsional de Vigas I-Comparação entre EC3, BS 5950, AS 4100 e Métodos
Numéricos utilizando Elementos Finitos de Casca”, VII Congresso de Mecânica
Aplicada e Computacional, Vol.I-Mecânica dos Sólidos e Estrutural, pp. 345-354,
91. João Paulo Davim, Pedro Reis, Carlos Conceição António, “Furação de Laminados
Reforçados com Fibras de Carbono por Autoclave – Influência dos Parâmetros
Processuais na Laminagem”, VII Congresso de Mecânica Aplicada e
Computacional, Vol.I-Mecânica dos Sólidos e Estrutural, pp. 475-483, ISBN 972778-058-X, Universidade de Évora, 14-16 April, 2003
92. Paula M.R.P. Castro, Raimundo M. Delgado, José César de Sá, “Metodologia
Simplificada de Avaliação de Efeitos Não Lineares”, VII Congresso de Mecânica
Aplicada e Computacional, Vol.II-Mecânica dos Sólidos e Estrutural, pp.577-586,
93. Nuno Lopes, L. Simões Silva, Paulo Vila Real, P. A.G. Piloto, “Modelação
Numérica do Comportamento de Vigas Metálicas com deslocamento Axial
restringido, em Simulação de Incêndio”, VII Congresso de Mecânica Aplicada e
242
Computacional, Vol.II-Mecânica dos Sólidos e Estrutural, pp.627-638, ISBN 972778-058-X, Universidade de Évora, 14-16 April, 2003
94. Carlos Conceição António, João Paulo Davim, “Optimização das Condições de
Corte na Fresagem de Topo usando um algorítmo Genético”, VII Congresso de
Mecânica Aplicada e Computacional, Vol. II-Mecânica dos Sólidos e Estrutural,
pp.775-784, ISBN 972-778-058-X, Universidade de Évora, 14-16 April, 2003
95. Catarina F. Castro, Luísa Costa Sousa, Carlos Conceição António, “Optimização de
Processos de Enformação Plástica”, VII Congresso de Mecânica Aplicada e
Computacional, Vol.II-Mecânica dos Sólidos e Estrutural, pp.821-830, ISBN 972778-058-X, Universidade de Évora, 14-16 April, 2003
96. José Trigo Barbosa, António Mendes Ferreira, “Os Elementos de Ahmad e de
Marguerre na Análise de Cascas – o Efeito da Curvatura”, VII Congresso de
Mecânica Aplicada e Computacional, Vol.II-Mecânica dos Sólidos e Estrutura,
97. V.H.S. Neves, Carlos Conceição António, “Projecto Óptimo de Ligações
Aparafusadas em Estruturas Metálicas segundo o EUROCÓDIGO”, VII Congresso
de Mecânica Aplicada e Computacional, Vol.II-Mecânica dos Sólidos e Estrutura,
98. J.E. Ribeiro, Mário Vaz, P.A.G. Piloto, “Medição de Campos de Tensões
Residuais-Estudo Preliminar”, VII Congresso de Mecânica Aplicada e
Computacional, Vol.III-Mecânica de Fluídos-Tópicos Multidisciplinares, pp.15151524, ISBN 972-778-058-X, Universidade de Évora, 14-16 April, 2003
99. Elza Fonseca, C.M. Oliveira, F. Queirós de Melo, Paulo Ribeiro, “Um Novo
Elemento Finito de Tubo Curvo para Análise de Tubagens Tridimensionais. Caso
de Estudo Numérico e Experimental”, VII Congresso de Mecânica Aplicada e
Computacional, Vol.III-Mecânica de Fluídos-Tópicos Multidisciplinares, pp.17011709, ISBN 972-778-058-X, Universidade de Évora, 14-16 April, 2003
100. P.A.G. Piloto, Luis Mesquita, P. Ribeiro, Mário Vaz, Paulo Vila Real, “Estudo
Numérico e Experimental da Encurvadura Lateral Torsional de Perfis IPE com e
sem reforços Transversais na Alma”, VII Congresso de Mecânica Aplicada e
Computacional, Vol.III-Aplicações Industriais / Modelação Numérica, pp.18551864, ISBN 972-778-058-X, Universidade de Évora, 14-16 April, 2003
101. Pedro Leal Ribeiro, “Análise da Vibração de Estruturas em Regime Não-Linear
Geométrico Pelos Métodos dos Elementos Finitos hierárquicos de Newton e
Shooting”, VII Congresso de Mecânica Aplicada e Computacional, Vol.IVAplicações Industriais / Modelação Numérica, pp.1885-1864, ISBN 972-778-058X, Universidade de Évora, 14-16 April, 2003
102. Rute Lopes, Pedro Ribeiro, “Vibração Tridimensional de Vigas em regime NãoLinear Geométrico pelo Método dos Elementos Finitos Hierárquico”, VII
Congresso de Mecânica Aplicada e Computacional, Vol.IV-Aplicações Industriais /
Modelação Numérica, pp.2213-2223, ISBN 972-778-058-X, Universidade de
Évora, 14-16 April, 2003
243
103. Rui Pedro Duarte, Pedro Leal Ribeiro, “Vibração em Regime Livre de Placas
Laminadas Espessas pelo Método dos Elementos Finitos Hierárquico”, VII
Congresso de Mecânica Aplicada e Computacional, Vol.IV-Aplicações
Industriais/Modelação
Numérica,
pp.2225-2233,
ISBN
972-778-058-X,
Universidade de Évora, 14-16 April, 2003
104. Nuno Lopes, Paulo Vila Real, L. Simões da Silva, Paulo Piloto, “Comportamento
de Vigas – Coluna em situação de Incêndio: uma Nova Proposta de Cálculo
Simples Alternativa ao EC3”, IV Congresso de Construção Metálica e Mista,
Instituto Superior Técnico, Lisboa, 4-5 Decembro, 2003
105. Paulo Piloto, L. Mesquita, P. J. Ribeiro, Mário Vaz, Paulo Vila Real, “A Influência
das Imperfeições Geométricas na Resistência de Vigas à Encurvadura Lateral”, IV
Congresso de Construção Metálica e Mista, Instituto Superior Técnico, Lisboa, 4-5
Decembro, 2003
106. Paulo F.P. Matos, Pedro M.G.P. Moreira, Lúcia M.S. Dinis, F. Q. Melo, “Uso do
Maple em Soluções Analíticas na deformação de Laminados”,VII Congresso de
Mecânica Aplicada e Computacional, Vol.IV-Aplicações Industriais / Modelação
Numérica, pp.2213-2223, ISBN 972-778-058-X, Universidade de Évora, 14-16
April, Vol.IV, pp.2203-2212, 2003
107. Carlos Sousa, Teresa Restivo, "Incertezas nas Medições", 5º Encontro Nacional de
Análise Experimental de Tensões, Coimbra, 2004
"Instrumentação para Medição", E-LEARNINGUP03|04: Um Projecto Piloto na
Universidade do Porto, Edição Universidade do Porto, ISBN 972-8025-27-0, pág.
75-78, 2004
109. Maria Teresa Restivo, Maria de Fátima Chouzal, Fernando Gomes de Almeida,
Margarida Amaral, Susana Leitão, "Cursos Temáticos de E-Learning no Domínio
da Instrumentação para Medição", eLES04, Universidade de Aveiro, 2004
110. Ana Barroso, Eurico Carrapatoso e Maria Teresa Restivo, "A Utilização de
Projectos Multidisciplinares de Engenharia no Processo de Ensino/Aprendizagem",
eLES04, Universidade de Aveiro, 2004
111. Joaquim Gabriel Mendes, Maria Teresa Restivo, Fernando Oliveira Carlos Moreira
da Silva e Carlos Sousa, "Remote Control Application at FEUP", eLES’04eLearning no Ensino Superior, Univ. of Aveiro, 27-29 Out 2004
112. Manuel F. Silva, J. A. Tenreiro Machado, António M. Lopes, 2004, “Artificial
Locomotion Systems Modelling and Simulation”, Actas do Encontro Científico do
ROBÓTICA 2004 - 4º Festival Nacional de Robótica, 23 - 24 de Abril de 2004,
Porto, Portugal, pp. 3 - 10
113. M. Santos, F. Vasques, M. Stemmer, “Analysis of Timing Properties from Network
Control Systems”. In 6th Brazilian Workshop on Real-Time Systems, Gramado,
Brazil, 2004
244
114. M. Santos, F. Vasques, M. Stemmer, “O Impacto da Comunicação em Sistemas de
Controle via Redes CAN.” In XV Brazilian Automatic Congress (CBA’04),
Gramado, Brazil, 2004
115. Henriqueta Nóvoa: Utilização das Tecnologias de Informação e Comunicação
(TIC) no Sector Vitivinícola, apresentação convidada, Instituto do Vinho da
Madeira, Funchal, Madeira, 2004.01.26, 2004
116. Matos, A.S., J.P.Sousa e J.F.Sousa, ‘Planeamento de um Sistema de Transportes
Colectivos de Passageiros numa Zona Metropolitana – O Caso da Província de
Maputo’. IO 2004 - 11º Congresso da APDIO (Associação Portuguesa de
Investigação Operacional), Faculdade de Engenharia da Universidade do Porto, 4-7
Abril, 2004
117. Lia Patrício, J. Falcão e Cunha, Raymond Fisk: Bringing Marketing methods to
Interaction Design: a study of Internet banking. Actas da 1ª Conferência Nacional
em Interacção Pessoa-Máquina (Interacção 2004), 2004.07.10-12, Lisboa, Portugal,
ISBN: 972-98464-4-8, p. 165-170, 2004
118. Miguel Gonçalves, J. Falcão e Cunha, Lia Patrício (2004), “Usability testing of
services offered through the Internet: results of a preliminary study for Internet
banking”. Actas da 1ª Conferência Nacional em Interacção Pessoa-Máquina
(Interacção 2004), 2004.07.10-12, Lisboa, Portugal. ISBN: 972-98464-4-8, p. 253255, 2004
119. A Oliveira, A Palmero, L Garcia-Rodriguez, "Estudio Experimental de un Colector
Solar Térmico Integrado en un Sombreador", Proc. XII Congresso Ibérico de
Energia Solar, ISES, Vigo, 2004
Dissertations: MSc thesis
1.
AP de Jesus, "Software for the Assessment of the Fatigue Life of Structural
Components", supervisors: PMST de Castro, AA Fernandes and AS Ribeiro
(UTAD, Portugal), 1999
2.
HS Lopes, "Development of Methodologies for Systems of Environmental
Management According to ISO 14001", supervisor: AA Fernandes, 1999
3.
LFM Silva, "Multi-Site Damage in Riveted Lap Joints: Experimental Simulation
and Finite Element Prediction", supervisor: PMST de Castro, 1999
4.
José Borges, "Especificação de um sistema GIST baseado na Web, vocacionado
para empresas de transportes públicos de pequenas dimensões", supervisor: Reis
Lima Quarteu (co-supervised by João Falcão e Cunha), 1999
5.
DM Paes, "Estudo da Aplicação do CASE Oracle Designer/2000 ao Projecto
GIST", supervisor: JF Cunha, 1999
6.
TC Barros, "Disponibilização na Internet de Horários ao Público", supervisor: JF
Cunha, 1999
245
7.
António Pirra, "Energia e qualidade do ar em edifícios para suínos", Faculdade de
Engenharia do Porto, 1999
8.
H Monteiro, "Parametric Study of the Optimization of Resistance Spot Welding",
supervisor: AA Fernandes, 2000
9.
Carlos Jorge Almeida Costa, “Análise e Concepção de Sistemas de Tempo-Real”,
MSc thesis in Electrical and Computer Engineering, supervisor: António Pessoa de
Magalhães, 2000
10. Amândio Cupido, "Potencialidades energético ambientais na reabilitação urbana. o
centro histórico do porto", FEUP, 2000
11. João Souto, "Impacto dos filtros na qualidade do ar interior", FEUP, 2000
12. Carla Maria Dias Aguiar Costa e Silva, "Simulation of Glass Forming Containers
and Thermal Stresses", supervisor: JM César Sá, 2000
13. Luís Braga, "Análise Energética e Exergética da Central de Cogeração da RAR Refinarias de Açúcar Reunidas", 2000
14. Jorge Facão, "Comportamento Térmico de Torres de Arrefecimento Indirectas Para
Aplicação a Sistemas de Arrefecimento Ambiente", 2000
15. LMBS Teixeira, "Characterization of Single-Lap Adhesively Bonded Joints",
supervisor: PP Camanho, 2001
16. Luís Miguel Sousa e Silva, "Programação de PLCs segundo a norma IEC 1131-3",
MSc thesis in Electrical and Computer Engineering, supervisor: António Pessoa de
Magalhães, 2001
17. João Pedro Barata Carneiro, "Optimização de Célula de Trabalho Robotizada", MSc
thesis in Mechanical Engineering, supervisor: António Pessoa de Magalhães, 2001
18. João Mendes Moreira, "A construção de um sistema de armazenamento de dados no
âmbito do sistema GIST98/EUROBUS", MBA, Supervisor: JF Sousa 2001
19. Jaime Reis da Silva, "Análise Comparativa de Políticas Óptimas de Substituição de
Veículos. Concepção e Desenvolvimento de um Sistema de Apoio à Decisão para a
Substituição de Veículos", M.Sc. in Electrical Engineering and Computers,
Supervisor: JF Sousa, 2001
20.
DMG Gomes, "Modelação de Processos de Negócio: Exemplo de Aplicação a uma
Empresa de Construção Civil", supervisors: DNJ Nunes, JF Cunha, 2001
21. Victor Peixoto, "Estudo do Comportamento Térmico de Espumas Flexíveis de
Poliuretano na Fase de Cura", 2001
22. RJ Alves de Sousa, "Analysis of Tri-Dimensional Incompressive Problems",
supervisor: RM Natal Jorge, 2002
23. José Miguel Resende de Jesus,·"Modelação e Controlo de um Sistema de
Climatização", MSc thesis in Mechanical Engineering, supervisor: Fernando Gomes
de Almeida, 2002
246
24. Joaquim Albano Ferreira Duarte, "Análise de um modelo de diagnóstico de
empresas para endogenização de comércio electrónico", co-supervisor: João Falcão
e Cunha, 2002
25.
JAF Duarte, "Análise de um modelo de diagnóstico de empresas para
endogenização de comércio electrónico", supervisors: MHS da Nóvoa, JF Cunha,
2002
26. Silvestre Taveira Pinho, "Crashworthiness of composite structures", FEUP,
supervisor: PP Camanho (co-supervised by M Moura), 2002
27. Cassilda Maria Lopes Tavares, "Bonded metallic insets for bolted joints in
composite structures", FEUP, supervisor: PP Camanho, (co-supervised by AJM
Ferreira), 2002
28. Nuno Miguel Magalhães Dourado, "Optimization of metal forming processes based
on evolutionary search", supervisor: Carlos Alberto da Conceição António, 2002
29. Figueiredo Augusto Marcos, "Numerical simulation of sugar juice extraction",
supervisor: José M. César de Sá, 2002
30. Francisco Manuel Andrade Pires, "Finite element modelling of ductile fracture
initiation on bulk plastic forming processes", supervisor: José M. César de Sá, 2002
31. Luísa Alexandra Rocha Silva, "Modelling of the generalized newtonian fluid flow applications to polymer injection", supervisor: José M. César de Sá, 2002
32. Vasco Jorge Garcia Fernandes Carneiro de Melo, "Modelo de Negócio Baseado na
Internet e no Turismo no Espaço Rural", MBA, 2003
33. João Manuel de Amaral Esteves, "A Certificação de Qualidade nos Negócios
Electrónicos", MBA, 2003
34. Graça Maria Afonso da Costa, "Factores Geradores de Valor para o Sector Público:
Uma Aplicação do Balanced Scorecard ao Sector do Transporte Colectivo de
Passageiros", MBA, supervisor: JF Sousa, 2003
35. Maria da Luz Silva Fernandes, "Política de localização das infra-estruturas de apoio
ao transporte colectivo", FEUP, supervisor: JF Sousa, 2003
36. Miguel Luís Soares Teixeira, "Estudos de Mobilidade numa Zona Metropolitana:
Gestão da Informação e Apoio à Avaliação do Impacto de Estratégias Alternativas",
FEUP, supervisors: JP Sousa and JF Sousa, 2003
37. Anabela Outeiro Martins, "Influência de materiais de revestimento de pavimentos
na qualidade do ar interior em termos de compostos orgânicos voláteis", FCUP,
2003
38. Joaquim Airosa, "Técnicas de medição e controlo da qualidade do ar interior",
FEUP, 2003
39. Mário Guindeira, "Determinação dos coeficientes de sorção e difusão de covs em
materiais de construção", FEUP, 2003
40. MPL Parente, "Elasto-plastic Analysis of Shell like Structures with Anisotropic
Behaviour", supervisor: RM Natal Jorge, 2004
247
41. António Filipe Nunes Gomes, "WEBGRAF – Aplicação WEB para execução de
Grafcets e Redes de Petri em Controladores Lógicos Programáveis", MSc thesis in
Automation, Instrumentation and Control, supervisor: António Pessoa de
Magalhães, 2004
42. Rodrigo Sanches Pedro, "Controlo Não-Linear de Actuadores Pneumáticos", MSc
thesis in Automation, Instrumentation and Control, supervisor: Fernando Gomes de
Almeida, 2004
43. Idalina Maria Gomes da Silva, "Controlo de Ordem Não-Inteira de um Eixo Linear
Electro-Hidráulico com Forte Atrito", MSc thesis in Automation, Instrumentation
and Control, supervisor: Manuel Rodrigues Quintas, 2004
44. José Miguel Salgado, "Estudo De Um Sistema De Ar Condicionado Utilizando Um
Dessicante Líquido E Rotores De Fibras", FEUP, 2001
1.
AG Magalhães, "Acoustic Emission and X-Rays in the Analysis of Creep in
Composite Materials", supervisors: AT Marques and PMST de Castro, 1999
2.
JS Domingues, "Application of Trefftz Boundary Element Method to Fracture
Mechanics", supervisors: PMST de Castro and A Portela (Univ Nova de Lisboa),
1999
3.
RM Natal Jorge, "Modelling of Incompressible Problems with Enhanced Strain
Method Based on Compatible Modes", supervisors: JMA César de Sá and CMB
Reis Gomes, 1999
4.
PP Camanho, "Application of Numerical Methods to the Strength Prediction of
Mechanically Fastened Joints in Composite Laminates", supervisor: FL Matthews
(Imperial College, University of London, UK), 1999
5.
Eduardo Tovar, "Supporting Real-Time Communications with Standard FactoryFloor Networks", PhD thesis in Electrical and Computer Engineering, superviser:
Francisco Vasques, July 1999
6.
Manuel Rodrigues Quintas, "Contribuition à la Modélisation et à la Commande
Robuste des Systèmes Électrohydrauliques", Thése de Doctorat en Automatique
Industrielle, INSA de Lyon, France, Jun 1999
7.
A Camanho, "Performance Measurement and Improvement in the Management of
Bank Branch Networks Using Data Envelopment Analysis", supervisor: RG Dyson
(Warwick Business School, University of Warwick, UK), 1999
8.
Júlio Correia da Silva, "Estudo de processos energeticamente eficientes de melhoria
das características térmico-higrométricas de edifícios para a produção intensiva de
suinos", Faculdade de Engenharia do Porto, 1999
9.
Manuel Dias de Castro, "Metodologias de calculo simplificadas de necessidades
energéticas em edifícios", Faculdade de Engenharia do Porto, 1999
248
10. Paula Maria Ranhada Pereira de Castro, "Encurvadura em estruturas de betão
armado", supervisor: Jose Cesar de Sá, 1999
11. JPM Gonçalves, "Integrity of Structures under Fatigue Loading", supervisors:
PMST de Castro, AA Fernandes and MFSF de Moura, 2000
12. António Mendes Lopes, "A Robotic Device for the Force-Impedance Control of
Industrial Manipulators", PhD thesis in Mechanical Engineering, supervisor:
Fernando Gomes de Almeida, March 2000
13.
MHS da Nóvoa, "Modelos de Endogenização de Tecnologias Internet para
Pequenas e Médias Empresas", supervisor: JF Cunha, 2000
14. Gabriela Ventura da Silva, "Estudo de emissões de covs por materiais usados em
interiores de edifícios", FEUP/FCUP, (co-supervised by Prof. Maria Teresa
Vasconcelos (FCUP)), 2000
15. Catarina Rosa Santos Ferreira de Castro, "Métodos inversos em processos de
enformação plástica", supervisor: José Manuel de Almeida César de Sá, 2000
16. Luís Miguel Pinho, "Software-Based Fault-Tolerance Mechanisms for Real-Time
Systems", PhD thesis in Electrical and Computer Engineering, supervisor:
Francisco Vasques, 2001
17. Carlos Manuel de Sousa Moreira da Silva, "Simulação Digital de Sistemas ÓleoHidráulicos em Computadores Pessoais", Dissertation for the access to the position
of “Investigador Auxiliar” at FEUP (with professional equivalence to a Ph.D.
thesis), Porto, Portugal, 2001
18.
DNJ Nunes, "Object Modeling for User-Centered Development and User Interface
Design: The Wisdom Approach", supervisor: JF Cunha, 2001
19. José Luis Alexandre, "Dimensionamento do componente térmico de um sistema de
arrefecimento para piso radiante", FEUP, 2002
20. Mário Jorge de Andrade Ferreira Alves, "Real-Time Communication over Hybrid
Wired/Wireless PROFIBUS-Based Networks", PhD thesis in Electrical and
Computer Engineering, supervisor: Francisco Vasques, January 2003
21. Jorge Augusto Fernandes Ferreira, "Modelação de Sistemas Hidráulicos para
Simulação com Hardware-in-the-loop", PhD thesis in Mechanical Engineering
Universidade de Aveiro, co-supervised by Prof. Fernando Gomes de Almeida, May
2003
22. Joaquim Gabriel Magalhães Mendes, "Two Novel Piezo-Actuations: an Accurate
Micro positioning Device and an Active Vibration System for Sewing Machines",
Ph.D. thesis in Industrial Electronics, University of Minho, 2003
23. Pedro Miguel de Almeida Areias, "Development of models based on finite element
method for simulation and optimization of technologic processes involving plastic
forming, cutting and chip formation", supervisors: Carlos A Conceição António and
José MA César de Sá, 2003
249
24. Rui Pedro Ramos Cardoso, "Technological development and numerical simulation
of sheet metal forming", supervisor: José Manuel de Almeida César de Sá, 2003
25. Lucas F M da Silva, "Adhesive joints for low and high temperatures", PhD thesis,
University of Bristol, February 2004
26. Max Mauro Dias Santos, "Real-Time Communication Mechanisms for Control
Systems interconnected by Industrial Communication Networks", PhD thesis in
Electrical Engineering (UFSC, Florianópolis, Brazil, (co-supervised by Prof.
Francisco Vasques)), September 2004
27. António dos Santos Matos, "Planeamento de um Sistema de Transportes Colectivos
de Passageiros numa Zona Metropolitana – O Caso da Província de Maputo",
FEUP, Supervisors: JP Sousa and JF Sousa, 2004
28. Ana Marrero Palmero, "Estudo de um sistema de aproveitamento da energia solar
utilizando dispositivos sombreadores de edifícios", 2004
Technical Reports
1.
RM Natal Jorge, AA Fernandes, José Américo Guedes, "Projecto de Construção de
Autoclave de Esterilização", INEGI report (for José dos Santos Monteiro, Lda),
INEGI, Febreuary 2000
2.
J Falcão e Cunha "Relatório da Disciplina de SISTEMAS DE INFORMAÇÃO Programa, Conteúdos e Métodos de Ensino Teórico e Prático das Matérias.
Relatório incluído no concurso (edital DR, 2ª série, nº 46, 24/02/2000) para
provimento de uma vaga de Professor Associado do DEMEGI-FEUP, 2000
3.
Gabriel David, Ana Azevedo, Eurico Carrapatoso, João Falcão e Cunha, Lígia M.
Ribeiro, Manuel Matos, Cristina Ribeiro, António Lucas Soares, José Fernando
Oliveira, "Proposta de Curso de Licenciatura em Ciência de Informação" (curso
conjunto FLUP e FEUP).
4.
DM Cardoso, JF Sousa, "Combinatorial Tools for Multi-attribute Ranking
Problems", in Cadernos de Matemática do Departamento de Matemática da
Universidade de Aveiro, CM01/I-21, 2001
5.
VTA Antunes, FMF Oliveira, "Análise das causas de fractura de ancoragens do
Alto Lindoso", INEGI report (for EDP), Jan 2002
6.
AA Fernandes, PT Castro, "Avaliação das Causas de Ocorrência de Fenómenos de
Fractura na estrutura de autocarros urbanos de transporte de passageiros", por
EVOBUS Portugal, S.A., Fev 2002
7.
AP Silva, JS Costa, AA Fernandes, "Overview of the European construction
sector", Growth RTD contract – Eurolifeform, Probabilistic Approach for
Predicting Life Cycle Costs and Performance of Buildings and Civil Infrastructure –
Nº G1RD-CT-2001-00497, 2003
8.
A Castro, AA Fernandes, "Relatório Final do projecto ECOVALOR - Estratégias de
Desenvolvimento de Políticas Ambientais e a sua Valorização Económica”,
250
Ministério da Defesa Nacional, Fundação das Universidades Portuguesas – Ref.
207-2000, 2003
9.
PP Camanho, CML Tavares, JB Almeida, PM Bandeira, PM Portela, RM Guedes,
"Test plan and test procedures", Report ICFRP-TN-002, Contract
ESTEC/16813/0/NL/PA, 2003
10. PP Camanho, PM Bandeira, PM Portela, RM Guedes, CML Tavares, "Review of
data
on
CFRP
bolted
joints",
Report
ICFRP-TN-001,
Contract
ESTEC/16813/0/NL/PA, 2003
11. ST Pinho, MPhil/PhD Transfer Report –Department of Aeronautics, Imperial
College-London, UK, 17th November 2003
12.
Eugénio Oliveira, António Augusto Sousa, António Pimenta Monteiro, Eugénio da
Costa Oliveira, João Correia Lopes, João Falcão e Cunha, João Pascoal Faria, Maria
Cristina Ribeiro, "Proposta de Curso de Mestrado em Engenharia Informática",
FEUP, 2003
13. AA Fernandes, PMS Tavares de Castro, RM Natal Jorge, "Avaliação do
Comportamento à Fadiga de 2 Nós tipo do Viaduto Metálico sobre a VCI",
IDMEC-Polo FEUP report (for GEG-Gabinete de Estruturas e Geotecnia, Lda),
IDMEC-Polo FEUP, Jan 2004.
14.
João José Pinto Ferreira, Américo Lopes de Azevedo, Eugénio Oliveira, João
Falcão e Cunha, José Marques dos Santos, José Manuel Mendonça, Vladimiro
Miranda: "Proposta de Curso de Mestrado em Inovação e Empreendedorismo
Tecnológico na Engenharia – MIETE", FEUP, 2004
15.
J. Falcão e Cunha, "Relatório Final de Auditoria – Fase de Pós-Simulação;
Experiência piloto de voto electrónico decorrida nas Freguesias de Mangualde,
Paranhos e São Sebastião nas Eleições para o Parlamento Europeu de 2004-06-13,
Relatório apresentado à UMIC no âmbito do projecto «Voto Electrónico para um
Portugal Moderno»", FEUP, 2004
16. PP Camanho, CG Dávila, DR Ambur, "On the Numerical Simulation of
Delamination in Composite Materials", NASA-TP, 2001 (in press)
17. E Oliveira Fernandes, "Project MATHIS (Materials for Healthy Indoor Spaces and
More Energy Efficient Buildings) – The publishable final report", Contract JOR3CT97-0194, IDMEC-FEUP, 2001
18. ECA (European Collaborative Action, “Urban Air, Indoor Environment and Human
Exposure”), Ventilation, Good Indoor Air Quality and Rational Use of Energy.
Report No 23, EUR20741 EN. Luxembourg: Office for Official Publications of the
European Communities, 2003
19. A Oliveira, "ECOCOOL (Ecological Cooling for Buildings by Combining a Closed
Wet Cooling Tower With Chilled Ceilings)- Final Report", JOULE program, CE
(DGXII); contrato JOR3-CT97-0195; 2000
20. A Oliveira, "COOLGEN (An Integrated Hybrid Solar/Gas System For Buildings) –
Final Report", JOULE program, CE (DGXII); contrato JOR3-CT97-0183; 2000
251
As Coordinating Partner:
“Development of a Relative Acceleration Transducer”, Proj.nº PUEM/S/DEF/88/95
1.
Project title: “ECOCOOL - Ecological Cooling for Buildings by Combining a
Closed Wet Cooling Tower With Chilled Ceilings”, Funding institution: E.C. 4th
FWP (Programme JOULE-DG XII); Contract Nr: JOR3-CT97-0195, Prime
institution: IDMEC-FEUP, Starting data: 01-01-1988, Ending data: 30-06-2000
2.
Project title: “COOLGEN - An Integrated Hybrid Solar/Gas System For Buildings”
Funding institution: E.C. 4th FWP (Programme JOULE-DG XII); Contract Nr:
JOR3-CT97-0183, Prime institution: IDMEC-FEUP, Starting data: 01-01-1998,
Ending data:30-06-2000
3.
Project title "MATHIS - Materials for healthy indoor spaces and more energy
efficient buildings", Funding institution: E.C. 4th FWP (Programme JOULE-DG
XII); Contract Nr: JOR3-CT97-0194, Prime institution: IDMEC-FEUP, Starting
data: 01-01-1998
4.
Ending data: 31-01-2001, Total person*month: 22
5.
Project title: “TRI-GEN EGD - A Novel Tri-Generation Electrogasdynamic
Converter System”, Funding institution: E.C. 6th FWP (Programme ENERGY –
DGResearch), Contract Nr: ENK6-CT2002-00686, Prime institution: IDMECFEUP, Starting data: 01-01-2003, Ending data: 30-01-2005
As Project Partner:
1.
Project title: Structural maintenance of aging aircraft - ’SMAAC’, contract BRPRCT95-0079, Funding institution: European Union (funding related to IDMEC only),
Prime institution: DASA, Germany, Starting data: 01-01-1996, Ending data: 30-031999
2.
Project title: Design optimisation and guidelines for multimaterial applications ’DOGMA’ thematic network, contract BRRT CT97-5029, Funding institution:
European Union , Prime institution: Oxford Brookes University, Starting data: 1511-1997, Ending data: 13-10-2000
3.
Project title: Benchmark calculations to demonstrate the potential of the proposed
CEN procedure for fatigue life assessment of unfired pressure vessels, EPERC
TTF1, Funding institution: EPERC, Prime institution: EPERC, Starting data: 01-012000, Ending data: 01-01-2004
252
4.
Project title: Fatigue crack growth rate qualifying criteria of rails for railways: test
conditions to be optimised - ’RAILCRACK’, contract SMT4-CT98-2240 (with
INEGI), Funding institution: European Union (funding related to INEGI only) ,
Prime institution: British Steel. (Portuguese parner: INEGI), Starting data: 01-012000, Ending data: 31-12-2000
5.
Project title: Feasibility study for the introduction of credit system arrangement in
the Universidade Eduardo Mondlane, Maputo, Mozambique - contract RFP
no.010/TPCU/VRAC/UEM/1998, Funding institution: The World Bank, via
Republic of Mozambique, Prime institution: INEGI, Starting data: 01-01-1999,
Ending data: 30-12-1999
6.
Project title: Pressure components fatigue design in the framework of Directive
97/23/EC on pressure equipment - contract 320 181, Funding institution: European
Union - Joint Research Centre JRC - Petten , Prime institution: JRC-Petten, Starting
data: 01-01-2001, Ending data: 31-12-2001
7.
Project title: Highly durable precast special concrete reinforced with non-metallic
rebars - contract BRPR-CT98-0708 (with INEGI), Funding institution: European
Union, Prime institution: INEGI, Starting data: 01-09-1998, Ending data: 31-052002
8.
Project title: Soldadura por difusão: Acção integrada Luso-Espanhola com
Universidad Complutense de Madrid, Funding institution: CRUP, Prime institution:
FEUP, Starting data: 01-06-1998, Ending data: 31-05-1999
9.
Project title: Probabilistic approach for predicting life cycle costs and performance
of buildings and civil infrastructures - ’EUROLIFEFORM’, contract G1RD-CT2001-00497 (with INEGI), Funding institution: European Union (funding related to
INEGI only), Prime institution: Taylor Woodrow, UK, Starting data: 01-04-2001,
Ending data: 29-03-2004
10. Project title: Advanced design concepts and maintenance by integrated risk
evaluation for aerostructures - ’ADMIRE’, contract G4RD-CT-2000-00396,
Funding institution: European Union (funding related to IDMEC only), Prime
institution: ALENIA, Italy, Starting data: 01-02-2001, Ending data: 01-07-2004
11. Project title: Simulation of damage in composite laminates, Funding institution:
NASA, Prime institution: INEGI, Starting data: 01-01-2003, Ending data: 31-122005
12. Project title: European network on control of joining technologies - ’AUTOJOIN’
thematic network, contract BRRT-CT98-5102 (with INEGI), Funding institution:
European Union (funding related to INEGI only), Prime institution: Instituto de
Soldadura e Qualidade, Portugal, Starting data: 01-02-1999, Ending data: 31-012003
13. Project title: Simulation of fiber-matrix interfacial crack growth, Funding: 19000
(funding related with IDMEC-Polo FEUP only), Prime institution: USAF-AirForce
Research Laboratory
253
14. “Development of a novel bio-film monitoring device for pipelines for drinkable
water”, European project, 5th Framework program, contract EVK1-CT-200200108, Environment for Sustainable Development, 2002-2006
15. "PREMISE-Promoting Electronic Commerce Initiatives for SMEs in Europe"
Consórcio TAPAS (UK), IDMEC-Pólo FEUP, DBC (NL), FTK (D), Kipling (S),
ODE (I):, Sub. ESPRIT “Dissemination and Awareness: continuous Submissions
(Task 0.6)”; 1999.01.01-2000.05.30
16. "WEST-Tecnologia Software Orientada a Ambientes Web", Consórcio Univ.
Politécnica de Valencia, FEUP, Univ. Nacional de La Plata, Argentina, Univ.
Técnica Federico Santa María, Valparaíso, Chile, Univ. Católica “Nuestra Señora
de la Asunción”, Paraguay, Univ. de Sevilla, Sevilla, Pontifícia Universidade
Católica do Rio de Janeiro, Brasil, EAFIT, Medellín, Colombia, Universidade de
Brasília, Brasil, Univ. de Málaga, España, UFPE, Sub. CYTED 2000; 2000.12.012002.12.31
17. Project title: "AIRLESS - Design, operation and maintenance criteria for air
handling systems and components for better indoor air quality and lower energy
consumption pre-normative research", Funding institution: E.C. 4th FWP
(Programme NNE-JOULE C), Contract Nr: JOR3-CT97-0171, Prime institution:
TNO, Starting data: 01-12-1997, Ending data: 31-12-2000
18. Project title: “TRIPLE-SAVE: Integrated System For Daylighting, Natural
Ventilation and Solar Heating For Buildings”, Funding institution: E.C. 4th FWP
(Programme JOULE-DG XII); Contract Nr: JOR3-CT97-0172, Prime institution:
Helsinki University of Technology, Starting data: 01-02-1998, Ending data: 31-072000
19. Project title: “DESICAIR Cooling - A Novel Desiccant Cooling System Using
Needle Impeller Rotors”, Funding institution: E.C. 4th FWP (Programme JOULEDG XII); Contract Nr: JOR3-CT97-0054, Prime institution: University of
Nottingham, Starting data: 01-01-1998, Ending data: 30-06-2000
20. Project title: “An Investigation Into the Design and Performance of a Thermal
Diode Wall”, Funding institution: E.C. 4th FWP (Programme JOULE-DG XII);
Contract Nr: JOR3-CT98-0092, Prime institution: Heriot-Watt University, Starting
data: 01-08-1998, Ending data: 31-01-2001
21. Project title: “DIAL Europe – European Integrated Daylighting Design Tool”,
Funding institution: E.C. 4th FWP, Contract Nr: JOR3-CT98-0092, Prime
institution: University Cambridge, Starting data: 01-04-2000, Ending data: 31-032003
22. Project title: LT-EUROPE, Funding institution: E.C. 4th FWP, Contract Nr:
XVII/4.1031/Z/98-362, Prime institution: Starting data: 23-12-1998, Ending data:
23-06-2000
23. Project title: "ENERBUILD - THEMATIC NETWORK: ENERGY IN THE
BUILT ENVIRONMENT", Funding institution: E.C. 5th FWP (EESD
Programme), Contract Nr: ERK6-CT-1999-20001, Prime institution: Energy
254
Research group – University College Dublin, Starting data: 01-01-2000, Ending
data: 31-01-2003
24. Project title: "PRESCO - European Thematic Network On Practical
Recommendations For Sustainaible Construction", Funding institution: E.C. 5th
FWP (EESD Programme); Contract Nr: EVK4-CT-1999-20003, Prime institution:
BBRI, Starting data: 01-07-2000, Ending data: 31-07-2004
25. Project title: "HYBRID-CHP - A Hybrid Combined Heat and Power System,
Funding institution: E.C. 5th FWP (ENERGY Programme-DG Research), Contract
Nr: ENK5-CT2000-0080, Prime institution: Tel-Aviv University, Starting data: 0111-2000, Ending data: 30-04-2003
26. Project title: “SOLAR LOUVRE – Solar Louvre Building Integrated Collector”,
Funding institution: E.C. 5th FWP (ENERGY Programme-DG Research), Contract
Nr: ENK6-CT2000-0330, Prime institution: University Nottingham, Starting data:
01-01-2001, Ending data: 30-06-2003
27. Project title "RESTART- RENEWABLE ENERGIES STRATEGIES AND
TECHNOLOGY APPLICATIONS FOR REGENERATING TOWNS", Funding
institution: E.C. 4th FWP (Programme NNE-THERMIE C - DG XII); Contract Nr:
28. Prime institution: Fundação para o Desenvolvimento da Zona Histórica do Porto,
Starting data: 01-10-1996, Ending data: 31-12-2001
29. Project title: “HOPE – Health Optimisation Protocol for Energy-Efficient
Buildings”, Funding institution: E.C. 5th FWP (Programme EESD), Contract Nr:
ENK6-CT2001-00505, Prime institution:, Starting data: 01/01/2002, Ending data:
31/12/2004
30. Project title: “PeBBu - EU Thematic Network: performance based building”,
Funding institution: E.C. 5th FWP , Contract Nr: GIRT-CT-2001-05038, Prime
institution: CIB, Starting data: 01/10/2001, Ending data: 31/10/2004
31. Project title: “INDEX - Critical Appraisal of the Setting and Implementation of
Exposure Limits in the EU”, Funding institution: JRC – ISPRA, Prime institution:
JRC-ISPRA, Starting data: , Ending data:
32. Project title: “STRATEX - Strategies to evaluate the contributions of indoor air
pollution to human exposure”, Funding institution: JRC – ISPRA, Prime institution:
JRC-ISPRA, Starting data: , Ending data:
33. Project title: “Reshyvent – Cluster proj. On demand controlled hybrid ventilation in
residential buildings with specific emphasis on integration of renewables”, Funding
institution: EC, Contract Nr: ENK6-CT2001-00533, Prime institution: CHRI.BR,
Starting data: 01/01/2002, Ending data: 31/12/2004
255
National Projects:
As Leading Partner
1.
Project title: Unified elastoplastic model for metal forming processes, Funding
institution: Portuguese MCT, Prime institution: IDMEC - Polo FEUP, Starting data:
15-09-1997, Ending data: 15-08-2000
2.
Project title: Strategies for the development of environmental policies and its
monetary valuation - ’ECOVALOR’, Funding institution: Ministerio da
Defesa/CRUP, Prime institution: IDMEC, Starting data: 01-02-2001, Ending data:
30-01-2003
3.
Project title: Structural behaviour of adhesive bonded advanced composites, project
EME/35975/99, lumped together with projects EME/35943 and EME/35977 in
project POCTI/43525/EME/2000, Funding institution: Portuguese MCT, Prime
institution: IDMEC - Pólo FEUP, Starting data: 01-09-2001, Ending data: 01-092004
4.
Project title: Stress analysis of hybrid construction structures using pseudo-dynamic
techniques, SAPIENS project 35977/99, lumped together with projects EME/35943
and EME/35975 in project POCTI/43525/EME/2000 , Funding institution:
Portuguese MCT, Prime institution: IDMEC - Pólo FEUP, Starting data: 01-092001, Ending data: 01-09-2004
5.
Project title: Modelling and proof validation of hydroformed aluminium products,
project POCTI/EME/33640/99, Funding institution: Portuguese MCT, Prime
institution: IDMEC - Polo FEUP, Starting data: 01-12-2000, Ending data: 29-102003
6.
Project title: Reengineered wood products, Funding institution: IDMEC/UTAD,
Prime institution: IDMEC - Polo FEUP, Starting data: 01-01-2000, Ending data: 3112-2004
7.
Project title: Increasing the efficiency of mechanically fastened joints in composite
materials using adhesively bonded inserts, project POCTI/43525/EME/2000
(lumping together projects EME/35943/99, EME/35975/99, and EME/35977/99).
Funding institution: Portuguese MCT, Prime institution: IDMEC - Pólo FEUP ,
8.
Project title: Optimisation of laser welded tailor made blanks for automotive parts,
PRAXIS/EME/1224/1998, Funding institution: Portuguese MCT, Prime institution:
IDMEC-Polo FEUP
9.
Project title: Modelling of Female Pelvic Floor Damage and its Clinical
Significance, POCTI/ESP/46835/2002, Funding institution: Portuguese MCT,
Prime institution: IDMEC-Polo FEUP, Starting data: 1 October 2003, Ending data:
30 Setember 2006
10. Project title: Hydroforming of dissimilar tailor-welded tubular blanks,
POCTI/EME/47289/2002, Funding institution: Portuguese MCT, Prime institution:
256
IDMEC-Polo FEUP, Starting data: 1 December 2003, Ending data: 30 November
2006
11. Project Title: Non-Linear dynamic analysis of structures by the hierarchical finite
element and experimental methods, POCTI/32641/EME/2000, Coordination: Pedro
Leal Ribeiro, Funding Entity: FCT, Prime Contractor: IDMEC-Pólo FEUP, Total
Award Period Covered: from 01-12-2000 to 31-12-2003
12. Project Title: Optimization of the Machining of Polymeric Matrix Composites
Based on Numerical and Experimental Models POCTI/32684/EME/2000,
Coordination: Carlos Conceição António, Funding Entity: FCT , Prime Contractor:
IDMEC-Pólo FEUP, Total Award Period Covered: from 1-11-2000 to 31-10-2003
13. Project Title: Non local models of large deformations for ductil failure
POCTI/41572/EME/2001, Coordination: José César de Sá, Funding Entity: FCT ,
Prime Contractor: IDMEC-Pólo FEUP, Total Award Period Covered: from 01-022002 to 31-01-2005
14. Project Title: Development of Galerkin meshless methods for free surface problems
and mobile descontinuities POCTI/47101/EME/2002, Coordination: José César de
Sá, Funding Entity: FCT , Prime Contractor: IDMEC-Pólo FEUP, Total Award
Period Covered: from 01-07-2003 to 31-06-2006
15. “Desenvolvimento de um Dispositivo de Impedância Controlada
Manipuladores Robóticos”, FCT project nº PBIC/C/TPR/2552/95,
para
16. “Distributed Embedded ARchitectures using COTS components - DEAR-COTS,
FCT project nº Praxis/P/EEI/14187/1998
17. “CIDER: Communication Infrastructure for Dependable and Evolvable Real-time
systems”, FCT Proj.nº POSI/1999/CHS/33139
18. “Neural
Network
Controllers
POCTI/1999/EME/32639
for
Pneumatic
Actuators”,
Proj.nº
19. “Development of a robotic device with potential use in orthopaedic surgery”,
Proj.nº POCTI/1999/EME/32964
20. “TERRA: Transparent Environment for Replicated Ravenscar Applications”,
Proj.nº POSI/38932/CHS/2001
21. “An experience of Multidisciplinary analysis of Engineering Problems”, funded by
the Faculty of Engineering, 2003-2005
22. “Development of Transducers for Displacement measurements in Civil
Engineering”, supported by the University of Porto and the Ilideo Pinho
Foundation, Nov. 2003 - Dec 2004
23. “Laboratorios Remotos @ UP“, POSI – Mesure M, IRICUP, Univ. of Porto, 20042005
24. “Robotic Cell for Manipulation Studies”, FCT ref. CONC-REEQ/1165/200, 20042007
257
25. "SMART-Conhecimento e Comércio na Internet", Sub. ICPME 1998-03-30,
Criação de PME de Base Tecnológica; 1999.01.01-1999.12.31
26. "AMMnet - Sistema avançado de apoio às actividades de produção, comércio e
gestão da AMM com a interNET", A. M. Mesquita & Filhos Lda., INEGI, UMa,
Accenture: Sub. ICPME 1997-12-23, Transferência de Tecnologia; 1999.01.012001.11.30
27. "GESBUS 2002-2004 Gestão de Viaturas", OPT, STCP, INEGI, Sub. AdI 2002 –
Projectos de Investigação em Consórcio, Programas POCTI, POSI, FEDER e MCT;
2002-2003
28. "e-Mercatura 2001-2002-Apoio ao Desenvolvimento dos Produtores de Vinhos de
Qualidade pela sua Promoção Internacional através da Internet", Sub. CCRNPRONORTE, INEGI, 2001.03.01-2002.02.28
29. "EUROBUS-Optimização Inteligente do Planeamento Operacional de Transportes
Orientada para a Disponibilização de Informação aos Utentes e Decisores",
Consórcio C-GIST, STCP, Sub. PRAXIS XXI - AdI 1997.04.01-1999.03.15
30. "InfoVini 2003: Sustentar a Competitividade dos Vinhos Portugueses
Acrescentado-lhes Valor Através da Disponibilização de Informação Multimédia de
Qualidade", Sub. POSI, medida “Conteúdos para Banda Larga”, 2003.10.31
31. "ViniPortus 2003: Projecto Vinhos na Cidade do Porto VINIPORTUS", Sub. POSI
– integrado no Proj. Porto Cidade Digital, 2003.03.30
32. "Enhancing Service Delivery Systems through Technology: a Multidisciplinary
Perspective applied to Internet Banking (Análise de Sistemas para Prestação de
Serviços apoiados em Tecnologias - uma perspectiva multidisciplinar aplicada à
Banca na Internet", Banco BPI 2000-2004
33. Project title: “Saúde ambiental em ambiente escolar” , Funding institution:
Fundação Calouste Gulbenkian, Contract Nr.: , Prime institution: IDMEC-FEUP ,
As Project Partner:
1.
Project title: Advanced design of vehicle structures under service and impact
conditions - PRAXIS 2/2.1/TPAR/2041/95, Funding institution: Portuguese MCTFunding for FCT-UC and IDMEC, Prime institution: IDMEC - Pólo IST, Lisbon,
2.
Project title: Optimization of laser welded tailor made blanks for automotive parts PRAXIS/C/EME/12274/98, Funding institution: Portuguese MCT, Prime
institution: INEGI, Starting data: 01-06-1999, Ending data: 31-12-2002
3.
Project title: Injection Forging - PRAXIS XXI 2/2.1/TPAR/2094/95 , Funding
institution: Portuguese MCT, Prime institution: IDMEC-IST, Starting data: 16-051997, Ending data: 16-05-2000
258
4.
Project title: Design of a steam-heated sterilizer, Funding institution: José dos
Santos Monteiro, Lda, Prime institution: INEGI, Starting data: 01-02-2000, Ending
data: 31-01-2001
5.
Project title: Biomechanical behaviour of pelvic floor muscles, task within project
’Traumatismo obstético no pavimento pélvico. Implicações urinárias; Childbirth
pelvis floor damage and urinary disorders’ - contract POCTI/ESP/36655/99,
Funding institution: Portuguese MCT (funding related with IDMEC only), Prime
institution: Hospital de S. João, Starting data: 11-11-2000, Ending data: 10-11-2003
6.
Project title: Fatigue behaviour of light structures components subjected to complex
loading, POCTI/EME/32984/99 , Funding institution: Portuguese MCT , Prime
institution: University of Coimbra, Starting data: 01-07-2000, Ending data: 30-062003
7.
Project title: fatigue behaviour of light structures components subjected to complex
loading, Prime institution: University of Coimbra
8.
Development of a new device for wet paint thickness measurements, project
financed by the private company CIN S.A., 2002-2003
9.
“Projecto PET”, Programa
SIFEC/14/01/03/FDR/00134.
de
I&D
em
Consórcio
-
POSI,
DGDR-
10. "Previsão Sonae 1991: Previsões de Vendas do Hipermercado Continente", Sub.
Modelo Continente Hipermercados, S.A., 1991-1992.
11. "D4D – Internet Based Integrated Production Planning and Design System for the
Construction Industry", ADI 2002 – Projectos de Investigação em Consórcio,
Programas POCTI, POSI, FEDER e MCT; 2003-2005
12. Project title: “ECOCLIMAT - Climatização Ecológica”, Funding institution: PEDIP
II (Programa Projecto Mobilizador para o Desenvolvimento Tecnológico), Prime
institution: ATECNIC,Lda, Contract Nr.:, Starting data: 1998, Ending data: 1999
13. Project title: "SINOPSE - Parâmetros Energético-Ambientais no Ordenamento do
Território e Planeamento Urbanístico", Funding institution: DGOTDU , Contract
Nr.:, Prime institution: FGT, Starting data: 01-10-1999, Ending data: 31-12-2001
14. Project title: “Mass Transfer in Fluidised Beds”, Funding institution: FCT (FCT
Sapiens Programme), Prime institution: FEUP, Starting data: 01-01-2001, Ending
data: 31-12-2003
Patents
1.
Maria Teresa Restivo e Fernando Gomes de Almeida, “Transdutor de Aceleração
Relativa”, Patent request to the Instituto Nacional de Propriedade Industrial, on
04/12/2001, file nº102697. Published in Boletim da Propriedade Industrial, nº62002, 28th of June 2002
259
Prototypes:
1.
Cooling tower prototype, inserido no projecto “ECOCOOL (Ecological Cooling for
Buildings by Combining a Closed Wet Cooling Tower With Chilled Ceilings”, do
programa JOULE da CE (DGXII); contrato JOR3-CT97-0195; 2000
2.
Combined cooling and power solar/gas prototype, inserido no projecto “COOLGEN
(An Integrated Hybrid Solar/Gas System For Buildings”, do programa JOULE da
CE (DGXII); contrato JOR3-CT97-0183; 2000
Protocols:
1.
Further to interactions between the universities where the Group members are based
(Universidade do Porto, mainly, but also Universidade de Aveiro, Universidade do
Minho, and Universidade de Tras-os-Montes e Alto Douro), national bilateral
actions include projects together with IDMEC-Lisbon. An example is
2.
-’Advanced design of vehicle structures under service and impact conditions’,
PRAXIS/2/2.1/TPAR/2041/96 PRAXIS XXI programme, 1997-2000, lead by
IDMEC-Lisbon; IDMEC-Polo FEUP assumed part of the work. Outputs of that
project include:
3.
At the international level, the collaboration with the Mechanics and Durability
Branch of NASA’s Langley Research Center by Dr Pedro P Camanho should be
mentioned. A result of this collaboration are NASA reports co-authored by Dr P P
Camanho, as well as joint papers to be published in international journals.
4.
Dr P P Camanho was also ’Window-on-Science visitor’, US Air Force Research
Laboratory - Materials and Manufacturing Directorate, Dayton, Ohio, USA, and US
Air Force Research Laboratory - Space Vehicles Directorate, Albuquerque, New
Mexico, USA, 1999.
5.
The interaction between the Group and the Universidad Complutense de Madrid,
Spain, (diffusion bonding), in the context of the PhD thesis preparation by J C
Ascenção Rodriguez, is other example of international bilateral cooperation. Also,
within the context of the preparation of the PhD thesis of A M P de Jesus
(modelling of fatigue using continuum damage mechanics theories), the cooperation
with CIMNE - International Center for Numerical Methods in Engineering,
Universitat Politècnica de Catalunya, Barcelona, Spain, lead by Prof E Oñate,
should be mentioned. The supervision of L F M Silva’s PhD thesis in the Univ of
Bristol, UK, by Prof R Adams (adhesive joints design), is other example of bilateral
cooperation.
6.
Through the SOCRATES / ERASMUS European Union program for the exchange
of students, the Group hosted several final year students of other universities.
Examples include Chalmers UT, Gothenburg, Sweden, (supervisor: Prof A A
Fernandes) or Politechnika Poznanska, Poznan, Poland (supervisor: Prof P M S T
de Castro).
260
7.
A co-operation action between the UISPA and the Real-Time Systems Group from
the University of York was started in 1998. Since then research collaborations in
the area of Architectures for Real-Time Systems and Real-Time Communication
Protocols have been established with Profs. Alan Burns and Andy Wellings. These
collaborations lead to several joint publications in major international conferences
and journals. Prof. Francisco Vasques is the responsible for setting-up this
collaboration.
8.
the ISEP-IPP was started in 1996. Since then research collaborations in the area of
Architectures for Real-Time Systems and Real-Time Communication Protocols
have been established with Profs. Eduardo Tovar, Luís Miguel Pinho and Mário
Alves. The major research results from this collaboration were:
9.
the University of Aveiro was started in 1998. Since then research collaborations in
the area of Real-Time Communication Protocols have been established with Prof.
Luis Almeida and Prof. José A. Fonseca. These collaborations lead to several joint
publications in major international conferences and journals. Prof. Francisco
Vasques is the responsible for setting-up this collaboration.
10. Since 2002, a new cooperation was started between the UISPA and two Brazilian
Universities: the “Universidade Federal de Santa Catarina, Brazil” and the
“Unileste, MG, Brazil”. Up to this moment, the major results from this
collaboration were the co-supervision by Prfo. Francisco Vasques of the PhD thesis
of Max Mauro Dias Santos (supervised by Prof. Marcello Stemmer - UFSC) and
also the publication of several papers in international refereed journals and
conferences
11. Prof. Tenreiro Machado (ISEP – IPP) has been working with Prof. António Mendes
Lopes in the area of Robot Control, since 2001. The major results from this
collaboration were:
12. Pedro Leal Ribeiro and Dr. Emil Samuil Manoach, from the Bulgarian Academic
Sciences, the author development investigation in the areas of thermo-elastic
vibrations in non-linear geometric regime. This collaboration has benefit from the
founds providing OTAN/NATO and Cultural Agreement Portugal-Bulgaria. This
agreement has finance the trip to Sofia, in the last December, made by Pedro
Ribeiro, and his one week stayed
261
Organization of Scientific Conferences:
1.
JF Cunha Member of the Organizing Committee and Programme Committee of
WISDOM’99: Workshop on Interactive System Design and Object Models,
ECOOP’99, The 13th European Conference on Object-Oriented Programming,
Lisboa, 1999.06.14-18 (http://math.uma.pt/WISDOM99/), 1999
2.
7th Portuguese Conference on Fracture, Covilhã, UBI, (AA Fernandes and PMST
de Castro), Feb 16-18, 2000
3.
European Pressure Equipment Research Council - EPERC, TTF1 meeting, Porto,
(AA Fernandes), Oct 2-3, 2000
4.
JF Cunha Member of the Organizing Committee and Programme Committee of
TUPIS'2000: Towards a UML Profile for Interactive Systems Development
Workshop, UML’2000, The Third International Conference on the Unified
Modeling Language, York - UK, 2000.10.02-03 (http://math.uma.pt/tupis00), 2000
5.
JF Cunha General Chair, Chair of the Programme Committee and Member of the
Organizing Committee of IBIC 2001 – Internet Business and the Industry of
Construction: Experiences and Challenges for Management, Architecture and
Engineering, Europarque, Porto, 2001.11.15-16 (http://math.uma.pt/ibic2001), 2001
6.
8th Portuguese Conference on Fracture, Vila Real, UTAD, (AA Fernandes and
PMST de Castro), 20-22 Feb 20-22, 2002
7.
Int Conf on Polymer Concretes, Mortars and Asphalts, Porto, Portugal, (AA
Fernandes and PP Camanho), Oct 9-11, 2002
8.
Prof. José César de Sá, organization of a thematic sessasion in Conformado de
Metales no V Congressso de Métodos Numéricos en Ingeniería, Madrid Espanha, 36 Junho, 2002
9.
JF Cunha «Co-Chair» e Member of the Programme Committee DSV-IS'2003, 10th
International Workshop on the Design, Specification and Verification of Interactive
systems, Funchal, Madeira, 2003.06.04-06 (http://math.uma.pt/dsvis2003), 2003
10. Pedro Leal Ribeiro_chairman of the 8th International Conference- Structural
Dynamics: Recent Advances, Southampton, England chairman of one session and
(review) of some articles, 14 - 16 July 2003
11. Carlos Conceição António Member of the Scientific Committee of: III Congresso
Luso Moçambicano de Engenharia, Universidade Eduardo Mondlane, Maputo, 19
to 21 de August, 2003;
12. VII Congresso de Mecânica Aplicada e Computacional, Universidade de Évora, 1416 de Abril, 2003.
13. A Camanho, 11ª Conferência da APDIO (Associação Portuguesa de Investigação
Operacional), IO2004, Faculdade de Engenharia da Universidade do Porto, 4-7
April
262
14. JF Cunha «General Chair» of CAISE 2005 – 15th Conference on Advanced
Information Systems Engineering, Porto, Portugal, 2005.06.13-17, 2005
15. International Conference on Sustainable Energy Technologies, SET2004,
Nottingham, June 2004
16. 1st International Conference on Sustainable Energy Technologies, SET2002, Porto,
June 2002
Membership of scientific and advisory committees:
1.
Jorge Freire de Sousa, Membro do International Program Committee of the
Conference Modeling and Management in Transportation, Poznan e Cracóvia,
Polónia, 1999
2.
Prof. Francisco Vasques was Program Co-chair of 3rd IEEE International
Workshop on Factory Communication Systems (WFCS-2000), Porto, Portugal,
September 6-8, 2000
3.
Jorge Freire de Sousa, Membro da Comissão de Programa do Congresso IO2000, 9º
Congresso Nacional da APDIO, Instituto Politécnico de Setúbal, Setúbal, 2000
4.
Jorge Freire de Sousa, Membro do International Program Committee of the 8th
Meeting of the EURO Working Group on Transportation: Improving knowledge
and tools for transportation and logistics development, University “La Sapienza”,
Faculty of Engineering, Roma, Itália, 2000
5.
Prof. José César de Sá, member of the Scientific Committee of 2nd International
Colloquium on Modelling of Glass Forming and Tempering, Vallencienes, França,
23-25 Janeiro,2002
6.
César Sá, member of the Scientific Comittee of “VIII Congresso Nacional de
Mecânica Aplicada e Computacional” and organization of a tematic sessassio on
Computational Strategies for Forming Processes in the COMPLAS 2003- 7th
International Conference on Computational Plasticity, Barcelona, 7-10 Abril 2003
7.
Rogério Augusto Martins Member of the Scientific Committee of VII Congresso de
Mecânica Aplicada e Computacional, Universidade de Évora, 14-16 de Abril, 2003
8.
Prof. Francisco Vasques was Program Co-chair of 5th IEEE International
Workshop on Factory Communication Systems (WFCS-2004), Vienna, Austria,
September 2004
9.
JF Cunha Member of the Local Arrangements Committee and Member of the
Programme Committee of IUI’2004 – 8th International Conference on Intelligent
User Interfaces e da CADUI’2004 – 5th International Conference on ComputerAided Design of User Interfaces, Funchal, Madeira, 2004.01.13-16
(http://www.iuiconf.org/), 2004
10. Integrity, Reliability, Failure: an International Conference, Porto, (P M S T de
Castro: coordinator of Symposium on Fracture Mechanics and Fatigue), July 1999
11. Integrity, Reliability, Failure: an International Conference, Porto, July, 1999 (JMA
César de Sá, LMPA Costa Sousa, RM Natal Jorge, DRJ Owen: coordinators of
263
Symposium on Reliability and Efficiency of Numerical Tools in Engineering
Analysis and Practice)
12. Prof. Francisco Vasques was a member of the Program Committee of the 11th
Euromicro Conference on Real-Time Systems, York, UK, in June 1999
13. Prof. Francisco Vasques was a member of the Program Committee of the 7th IEEE
International Conference on Emerging Technologies and Factory Automation
(ETFA'99), Barcelona, in October Spain, 1999
14. Prof. Francisco Vasques was Session Chair of the “Real-Time Communication
Protocols” session in the 7th IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA'99), Barcelona, in October Spain,
1999
Annual Conference of the IEEE Industrial Electronics Society (IECON'99), San
Jose, USA, in December 1999
16. JF Cunha Programme Committee Member of CLEI'99, “XXV Conferência
Latino-Americana de Informática”, coord. Prof. Carlos Heuser, Prof. Benjamin
Baran, Asuncion, Paraguay, 1999.08.30-09.03 (http://www.led.uc.edu.py/clei99/),
1999
17. JF Cunha Programme Committee Member of IDEAS’99, 2º Workshop
Iberoamericano de Ingeniería de Requisitos y Ambientes Software, San José, Costa
Rica, 1999.03.24-26, 1999
18. JF Cunha Programme Committee Member of WER’99: Segundo Workshop en
Ingeniería de Requerimientos/Engenharia de Requisitos, Buenos Aires, Argentina
1999.09.09-10 ( http://www.cic.unb.br/~facp/wer99/wer99homePE.html), 1999
19. M2D-Third International Conference on MECHANICS & MATERIALS IN
DESIGN, Orlando, Florida, USA 29-31 de Maio de 2000 (JMA César de Sá, LMPA
Costa Sousa, RM Natal Jorge: coordinators of Symposium on Numerical Tools in
Engineering Analysis)
20. 4th Int Meeting VECPAR (Vector and Parallel Processing) 2000, Porto, June 21-23,
2000
21. Prof. Francisco Vasques was member of the Program Committee of the 12th
Euromicro Conference on Real-Time Systems, Stockholm, Sweden, June 2000
22. Prof. Fernando Gomes de Almeida was member of the International Program
Committee of the 4th Portuguese Conference on Automatic Control, Guimarães,
Portugal, 4-6 October 2000
23. JF Cunha Programme Committee Member of IDEAS 2000, Terceras Jornadas
Iberoamericanas de Ingeniería de Requisitos y Ambientes Software, Cancún,
México, 2000.04.05-07 (http://www.inf.ufrgs.br/~ideas00/), 2000
24. JF Cunha Programme Committee Member of WER’2000: Terceiro Workshop en
Ingeniería de Requerimientos/Engenharia de Requisitos, Rio de Janeiro, Brasil, 1314 July, 2000
264
25. JF Cunha Programme Committee Member of CAPSI 2000 – 1ª Conferência da
Associação Portuguesa de Sistemas de Informação, Guimarães, 2000.10.25-27
(www.apsi.pt), 2000
International Conference on Real-Time Systems (RTS'2001), Paris, France, in
March 2001
27. Prof. Francisco Vasques was a member of the Program Committee of the 13rd
Euromicro Conference on Real-Time Systems (ECRTS’01), Delft, Netherlands, in
June 2001
28. Prof. Francisco Vasques was a member of the Program Committee of the 8th IEEE
International Conference on Emerging Technologies and Factory Automation
(ETFA'01), Nice, France, in October 2001
International Conference on Fieldbus Systems and their Applications (FET'01),
Nancy, France, in November 2001
30. JF Cunha Programme Committee Member of IDEAS 2001, Quartas Jornadas
Iberoamericanas de Ingeniería de Requisitos y Ambientes Software, Costa Rica,
2001.04.03-06, 2001
31. Damage and Fracture Mechs 2002, Maui, Hawaii, USA, Oct 15-17, 2002
32. Prof. António Pessoa de Magalhães was a member of the International Program
Committee of the International Conference “CARs&FOF’2002”
33. Prof. Fernando Gomes de Almeida was a member of the International Program
Committee of the 5th Portuguese Conference on Automatic Control (Controlo
2002), Aveiro, Portugal, September 2002
Workshop de Tempo-Real (WTR’02), Búzios, Brazil, Mai 2002
Euromicro Conference on Real-Time Systems (ECRTS’02), Vienna, Austria, in
June 2002
Workshop on Factory Communication Systems (WFCS'2002), Vasteras, Sweden, in
August 2002
37. JF Cunha Programme Committee Member of IDEAS 2002, Quintas Jornadas
Iberoamericanas de Ingeniería de Requisitos y Ambientes Software, Cuba,
2002.04.23-27 (http://www.dsic.upv.es/IDEAS02), 2002
Associação Portuguesa de Sistemas de Informação, Évora, 2002.10.25-27
(www.apsi.pt), 2002
265
39. JF Cunha Programme Committee Member of ICWE’02: Ibero American
Conference on Web Engineering 2002, Santa Fé, Argentina, 2002.09.09-13
(http://www.ing.unlpam.edu.ar/icwe2002/), 2002
40. JF Cunha Programme Committee Member of CARs&FOF'2002 - 18th International
Conference on CAD/CAM, Robotics and Factories of the Future, Porto, 03-05.
July, 2002
41. 14th International Conference on Composite Materials, San Diego, USA, July 1418, 2003
42. Prof. Francisco Vasques was member of the Program Committee of the 9th IEEE
International Conference on Emerging Technologies and Factory Automation;
ETFA’2003, Lisbon, Portugal, September 16-19, 2003
43. Prof. Francisco Vasques was member of the Program Committee of the 5th IFAC
International Conference on Fieldbus Systems and their Applications (FeT 2003),
Universidade de Aveiro, Portugal, July 7 - 8, 2003
International Conference on Real-Time Systems, RTS 2003, Paris, France March
30th–April 1st, 2003
45. Prof. Francisco Vasques was member of the Program Committee of the 5th IFAC
Symposium on Intelligent Components and Instruments for Control Applications
(SICICA-2003), Aveiro, Portugal, July 9-11, 2003
46. 3th International Conference on Fracture and Damage Mechanics, Paderborn,
Germany, Sept 2-4, 2003
47. JF Cunha Programme Committee Member of IDEAS 2003, Sextas Jornadas
Iberoamericanas de Ingeniería de Requisitos y Ambientes Software, Asuncion,
Paraguay, 2003.04.30-05.02 (http://alarcos.inf-cr.uclm.es/ideas2003/index.htm),
2003
48. JF Cunha Programme Committee Member of WER 2003: VI Workshop on
Requirements Engineering, Piracicaba, Brasil, 2003.11.27-28 (http://www.inf.pucrio.br/wer03/), 2003
Associação Portuguesa de Sistemas de Informação, Porto, Outubro 2003
(www.apsi.pt), 2003
Conference on Web Engineering 2003, Oviedo, Espanha, 2003.07.14-18
(http://oviedo3.ccu.uniovi.es/ICWE/), 2003
Conference on Web Engineering 2003, Munich, Alemanha, 2003
52. JF Cunha Programme Committee Member of INTERACT 2003 – Bringing the Bits
together – 9th IFIP TC13 International Conference on Human-Computer
Interaction, Zürich, Switzerland, 2003.09.1-5 (http://www.interact2003.org/), 2003
266
53. JF Cunha Membro da Comissão Científica Internacional da eSM@RT / EAPPM
2003 Workshop – ICT Advances in AEC Industry – em conjunto com a 10th ISPE
International Conference on Concurrent Engineering: Research and Applications,
Funchal, Madeira, 2003.07.26-31 (http://www.esmart.adetti.pt), 2003
54. JF Cunha Membro da Comissão de Programa das JISBD 2003: VIII Jornadas de
Ingeniería del Software y Bases de Datos, Alicante, Espanha, 2003.11.12-14
(http://gplsi.dlsi.ua.es/congresos/jisbd03), 2003
55. Prof. Fernando Gomes de Almeida was member of the Program Committee of the
6th Portuguese Conference on Automatic Control (Controlo 2004), June 7 - 9, Faro,
Portugal, 2004
Portuguese Conference on Automatic Control (Controlo 2004), June 7 - 9, Faro,
Portugal, 2004
Workshop de Tempo-Real (WTR’04), Gramado, Brazil, Mai 2004
Euromicro Conference on Real-Time Systems (ECRTS’04), Catania, Italy, June
2004
Workshop on Factory Communication Systems (WFCS'2004), Vasteras, Sweden, in
September 2004
60. Prof. Francisco Vasques was a member of the Program Committee of the 3rd
Workshop on Real-Time Networks (RTN-04), Catania, Italy, June 2004
International Conference on Real-Time Systems, RTS 2004, Paris, France, 2004
62. JF Cunha Programme Committee Member of SBES’2004 “XVIII Simpósio
Brasileiro de Engenharia de Software”, coord. Jaelson Freire Brelaz de Castro,
Brasília, Brasil, 2004.10.20-22 (http://www.unb.br/sbes2004), 2004
63. JF Cunha Membro da Comissão de Programa das JISBD 2004: IX Jornadas de
Ingeniería del Software y Bases de Datos, Málaga, Espanha, 2004.11.10-12
(http://jisbd2004.lcc.uma.es), 2004
Editorial Boards of International Journals:
1.
PMTS de Castro, Mechanika (ISSN 1392-1207)
2.
PMTS de Castro, Fatigue and Fracture of Engineering Materials and Structures
(ISSN 8756-758X)
3.
PMTS de Castro, Boletim da Universidade do Porto (ISSN 0871-7249)
267
4.
Armando Oliveira, International Journal of Ambient Energy, Ambient Press
Limited, UK, since 2003
National networks
1.
Organization of the Jornadas Portuguesas de Fractura of SPM - Sociedade
Portuguesa de Materiais, of which the 8th edition was held in Vila Real, Feb 20-22,
2002. Profs A A Fernandes and P M S T de Castro are co-organizers of these events
since their begining in 1983.
2.
Active participation in the relevant technical and scientific societies. P M S T de
Castro, for ex, is a member of the juri for the ’Eng Cruz Azevedo’ prize of APAET
- Associação Portuguesa de Análise Experimental de Tensões, an award for the best
papers published in the journal of APAET ’Mecânica Experimental’, of which he is
also a member of editorial board.
3.
Group researchers are active members of several relevant Portuguese societies, such
as:
-APAET - Associação Portuguesa de Análise Experimental de Tensões
-ISQ - Instituto de Soldadura e Qualidade
-Ordem dos Engenheiros
-SPM - Sociedade Portuguesa de Materiais
International networks
1.
[Proj. Kaleidoscope 2003] NoE – Network of Excellence.
2.
Within the context of European Union research activites, the Group was a member
of a thematic network, ’DOGMA’, already mentioned in other part of this report.
That network consisted of a 24 partners including universities, research labs and
companies.
3.
At the moment the Group is involved in a European Union thematic network
’AUTOJOIN’ on automation of welded fabrication, in particular the simulation of
welding processes. This network consists of 19 partners, including universities,
research labs and companies.
4.
Through Prof A A Fernandes, the Group participates in EPERC - European
Pressure Equipment Research Council, an European network concerned with
pressure equipment. This network is the European counterpart of the US PVRC (US
Pressure Vessel Research Council) and of the Japanese JPVRC (Japanese Pressure
Vessel Research Council). It should be mentioned that Prof A A Fernandes attended
the JPVRC Symposium 2002 / PVRC/EPERC/JPVRC Joint Workshop in Tokyo,
Japan, the 16-17 April 2002.
5.
Group researchers are members of several relevant international scientific societies,
of which some examples may be given:
ASC - American Society for Composites (USA),
268
ASEE - American Society for Engineering Education (USA),
ASME - American Society of Mechanical Engineers (USA),
EAIE - European Association for International Education,
ESIS - European Structural Integrity Society,
IoM - Institute of Materials (UK),
SEFI - Societé Europeenne pour la Formation des Ingenieurs,
PDMA - Product Development and Management Association (USA),
TWI - The Welding Institute (UK).
Other research groups
1.
Further to the bilateral collaborations mentioned above, it should be mentioned that
international research contracts, such as those of the European Union or ESA European Space Agency, are a source of important interactions. As examples of
partners in that context, the following are mentioned:
2.
-Firms: ALENIA (Italy), EADS (European wide company), Taylor Woodrow (UK),
etc.
3.
-R&D organizations: ESA (European wide institute), NASA (USA), NLR (the
Netherlands), etc.
4.
-Universities: Aachen (Germany), Cranfield (UK), London (UK), Patras (Greece),
etc.
5.
The Group’s internationalisation is emphasised mentioning that it hosted during
2000/2001 two Fulbright scholars - Professor C K H Dharan, University of
California at Berkeley, USA and Professor M Santare, University of Delaware,
USA - , as well as one NATO Outreach fellow - Dr Stefan D Pastramã, University
’Politehnica’ of Bucharest, Romania. Also, further to two recent stays of Dr P P
Camanho at NASA Langley Research Center as a Visiting Scientist, it should be
mentioned that Prof P M S T de Castro had a sabbatical leave at U C Berkeley in
March-June 2000.
6.
Dr S D Pastrama, the NATO post-doc fellow who visited the group for one
semester, works in other aspect of the group’s interests - Fracture Mechanics. Other
visitors, Profs Dharan and Santare, were Fulbright scholars visiting the Group
during one semestre each, and part of their time was indeed dedicated to design
engineering (design with polymers in the first case, and biomechanics design in the
second case).
7.
Luisa Costa Sousa participates in the project "Optimization of Laser Welded Tailor
Made Blanks for Automotive Parts", PRAXIS/P/EME/12274, INEGI & IDMEC
8.
The University of Aveiro participate in the Project POCTI/32684/EME,
"Optimization of the Machining of Polimeric Matrix Composites based on
Numerical and Experimental Models"
9.
Catarina Castro collaborates with other Interface Institute_INEGI. In This context
she has development her research activity in Optimization Project of Technologic
Processes in Mechanical Engineering
269
Other indicators
Software
1.
SOPHIE (Sources of Pollution for Healthy and Comfortable Indoor Environment),
part of Project MATHIS (Materials for Healthy Indoor Spaces and More Energy
Efficient Buildings), 2001
Pilot plants
1.
Cooling tower test facility, inserido no projecto “ECOCOOL (Ecological Cooling
for Buildings by Combining a Closed Wet Cooling Tower With Chilled Ceilings”,
do programa JOULE da CE (DGXII); contrato JOR3-CT97-0195; 2000
2.
Combined cooling and power solar/gas test facility, inserido no projecto
“COOLGEN (An Integrated Hybrid Solar/Gas System For Buildings”, do programa
JOULE da CE (DGXII); contrato JOR3-CT97-0183; 2000
3.
Solar louver collector test facility
4.
Light/vent pipe test facility
270
INEGI (1999-2004)
Books:
1.
J.F. Silva Gomes et al, “Proceedings 3º Encontro Nacional de Análise Experimental
de Tensões e Mecânica Experimental”, APAET, Porto, 1999.
2.
J.F. Silva Gomes and S.A. Meguid, “Integrity, Reliability and Failure”, Ed.
INEGI/EMDL, Porto, 1999.
3.
J.F. Silva Gomes et al, “Proceedings 1º Congresso Luso-Moçambicano de
Engenharia, Vol I and Vol. II”, FEUP/FEUEM, Maputo, 1999.
4.
A.J.M. Ferreira, A.A. Fernandes and A.T. Marques, (Editores), Modelling of
Sandwich Structures and Adhesive Bonded Joints, DOGMA Thematic Network, pp.
37-51, FEUP Edições, 2000;
5.
L.A. Ferreira , Tribologia –Notas de Curso, Publindústria, Porto, 1st edition ISBN
972-95794-5-8, 1998; 2nd edition ISBN 972-95794-5-8-2, 2000
6.
A.T. Marques et al, “Composites in Construction, A.A. Balkema Publishers,
Netherlands, 2001.
7.
J.F. Silva Gomes et al, “Proceedings 2º Congresso Luso-Moçambicano de
Engenharia”, FEUP/FEUEM, Maputo, 2001.
8.
J.F. Silva Gomes et al, “Proceedings 4º Encontro Nacional de Análise Experimental
de Tensões e Mecânica Experimental”, APAET, Bragança, 2001.
9.
Fernando Jorge Lino Alves, Fernando Jorge Sousa Braga, Manuel São Simão, Rui
Jorge de Lemos Neto, e Teresa Margarida Guerra Pereira Duarte, Livro
“PROTOCLICK - Prototipagem Rápida”, Fevereiro 2001.
10. A. J. M. Ferreira, A. A. Fernandes, A. T. Marques, Proceedings International
Conference on Polymer Concretes, Mortars and Asphalts, Porto, 2002
11. T. P. Duarte, F. Jorge Lino, A. Barbedo, J. M. Ferreira, “Metallic Tools Obtained
from Ceramic Moulding Using a Sol-Gel Process”, CIMTEC 2002, 10th
International Conferences on Modern Materials & Technologies, 10th International
Ceramics Congress & 3rd Forum on New Materials – Part B, 660 páginas, CIMTEC
2002, Techna Faenza 2003.
12. J.F. Silva Gomes et al, “Proceedings 3º Congresso Luso-Moçambicano de
Engenharia, Vol I and Vol. II”, FEUP/FEUEM, Maputo, 2003.
13. Paulo M. S. Tavares de Castro, Luís A. Andrade Ferreira, Jorge H. Oliveira Seabra
e José A. dos Santos Almacinha (Editors). GEARS 2003 – GEARS &
TRANSMISSIONS Workshop. Proceedings of the GEARS 2003 – Gears and
Transmissions Workshop, realizado na Faculdade de Engenharia da Universidade
do Porto, Porto, Portugal, em 5 de Junho de 2003, 286 páginas.
271
14. J.F. Silva Gomes et al, “Proceedings 5º Encontro Nacional de Análise Experimental
de Tensões e Mecânica Experimental”, APAET, Coimbra, 2004.
15. J.F. Silva Gomes, “Mecânica dos Sólidos e Resistência dos Materiais”, Edições
INEGI, Porto, 2004.
16. J. Ferreira Duarte, A. Barata da Rocha, A. Dias dos Santos, “Tecnologia Mecânica Corte em Ferramenta”, Livro editado pelo INEGI – Instituto de Engenharia
Mecânica e Gestão Industrial, ISBN 972-8826-00-1, Novembro de 2004.
Books Chapters:
1.
Rui Miranda Guedes, Long term behaviour Predictions of Polymeric Matrix
Composite Materials, in Modelling of Sandwich Structures and Adhesive Bonded
Joints, A.J.M. Ferreira et al. (Editors), DOGMA Thematic Network, pp. 37-51,
FEUP Edições, 2000;
2.
A. T. Marques, A. B. de Morais, J. F. Silva, P. T. de Castro, "Fracture Mechanics
concepts and structural integrity of filament wound pipes", in "Fracture Mechanics:
Applications and Challenges", ESIS publication 26, pp. 253-261. ELSEVIER
SCIENCE, 2000.
3.
F. Jorge Lino, Rui J. Neto, Alfredo Oliveira e Fernando Manuel Fernandes de
Oliveira, “Influence of Defects on Fatigue Life of Aluminium Pressure
Diecastings”, published in Biaxial/Multiaxial Fatigue and Fracture, ed. By
Carpinteri, ESIS STP (Special Technical Publication) Elsevier-ESIS book series,
February 2002.
4.
J. P. Nunes, A: T. Marques, C. A.Bernardo, “Compósitos de Matriz Polimérica”,
Materiais Dois Mil, M. A. Fortes, P. J. Ferreira (eds), Editora IST Press, Lisboa,
2003, pp. 175-189.
5.
Célia Parente Novo, Luis Miguel Sousa, “Compósitos Avançados de Cortiça”,
published in INAUTO - Inteligência e Inovação para a Indústria Automóvel, 2003.
6.
F. Jorge Lino, Rui J. Neto, Alfredo Oliveira, Fernando Manuel Fernandes de
Oliveira, “Influence of Defects on Fatigue Life of Aluminium Pressure
Diecastings”, Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Edited
by Andrea Carpinteri, Manuel de Freitas e Andrea Spagnoli, Elsevier, pp. 303-320,
2003.
7.
C.M.C. Pereira, L. M. H. Carvalho, C. A. V. Costa, “Simulation of the effects of a
cooling zone in the internal conditions of MDF continuous hot-pressing process”, in
Lignovisionen issue 4, Proceedings of the International Symposium on Wood based
Materials: Wood Composites and Chemistry, Institut für Holzforschung (ihf) und
Verband Holzwirte Österreichs – VHÖ, Universität für Bodenkultur, Wien, 2003
(about 500 p, ISSN 1681-2808).
8.
J. A. Simões, A. T. Marques,“Estudo e Desenvolvimento de uma Prótese de Anca
de Rigidez Estrutural Gradativa”, Bioingenieria en Iberoamerica, M. Cerrolaza
(Ed.), Merida, Venezuela, in press.
272
9.
J. P. Nunes, J. F. Silva, F.W.J. van Hattum, C. A. Bernardo, A. T. Marques, A. M.
Brito, A. S. Pouzada, “Production of Thermoplastic Towpregs and Towpreg-based
Composites”, in “Polymer Composites: from nano to macroscale” K. Friedrich, S.
Fakirov, Z. Zhang (editors), 2004, in press.
10. R. Amaro, R. Martins e J. Seabra, Most® Coating for Gears, accepted for
publication in “Current Trends in Tribology”, edited by the Eurpean Virtual
Tribology Institut.
11. A. Sottomayor, A. Campos e J. Seabra, Thermal and Non-Newtonian Lubricant
Rheological Parameters, accepted for publication in “Current Trends in Tribology”,
edited by the European Virtual Tribology Institut.
1.
P. Andersson, B. Graça, J. Seabra e H. Sainio, Development of procedures to
analyse contaminant particles in lubricating greases, Finnish Journal of Tribology,
Vol. 17 (3-4), 1998 (1999), 44-55;
2.
Rui Miranda Guedes, A.T. Marques and Albert H. Cardon, Creep/Creep-Recovery
Response of Fibredux 920C-TS-5-42 Composite Under Flexural Loading; Applied
Composite Materials, Vol.6, (1999), pp. 71-86;
3.
B. Bacroix, Th. Chauveau, J. Ferreira Duarte, A. Barata da Rocha and J. Gracio,
“The Respecitve Influences of Grain Size and Texture on the Formability of a 1050
Aluminium Alloy”, Int. J. of Engineering Sciences 37, pp. 509-26, 1999.
4.
T. P. Duarte, F. Jorge Lino e R. L. Neto, “Ceramic Materials for Casting Metallic
Moulds”, Struers Journal of Materiolography, Structure 34, pp. 9-11, Spring 1999.
5.
J. J. Gracio, F. Barlat and J. Ferreira Duarte, “Plasticity of Aluminum During NonProportional Loading”, Adv. Technol. Plasticity II, pg. 1365, 1999.
6.
Rui Miranda Guedes, José J.L. Morais, A.T. Marques and A.lbert H. Cardon,
Prediction of Long Term Behaviour of Composite Materials, Computers &
Structures, Vol.76, (2000), pp. 183-194;
7.
J.A. Simões, M.A. Vaz, S. Blatcher, and M. Taylor, Influence of Head Constraint
and Muscle Forces on the Strain Distribution Within the Intact Femur, Medical
Engineering and Physics, Vol.22 (2000), pp. 453-459;
8.
J.F. Silva Gomes, J.M. Monteiro and M.A.P. Vaz, “NDI of Interfaces in Coating
Systems Using Digital Interferometry”, International Journal of Mechanics of
Materials, Vol. 32 (2000), pp. 837-843;
9.
L. Magalhães, J. Seabra e C. Sá., Experimental observations of contact fatigue
crack mechanisms of austempered ductile iron (ADI) discs., WEAR, vol. 246, 2000,
134-148.
10. J. Paulo Davim, A. Monteiro Baptista, Relationship between cutting force and PCD
cutting tool wear in machining silicon carbide reinforced aluminium., Journal of
Materials Processing Technology, vol. 103, 2000, 417-423.
273
11. João Paulo M. Gonçalves, M. F. S. F. Moura, Paulo M. S. Tavares de Castro e A.
Torres Marques, "Interface Element Including Point-to-Surface Constraints for
Three-Dimensional Problems With Damage Propagation", Engineering
Computations: International Journal for Computer-Aided Engineering and
Software; 17:1, pp. 28-47, (2000);
12. M. F. S. F. Moura, João Paulo M. Gonçalves, A. Torres Marques e Paulo M. S.
Tavares de Castro, "Prediction of Compressive Strength of Carbon-Epoxy
Laminates Containing Delamination by Using a Mixed-Mode Damage Model",
Journal of Composite Structures; 50:2, pp. 151-157, (2000);
13. A.J.M. Ferreira, J.T. Barbosa, A.T. Marques, J.C. Sá, Non-linear analysis of
sandwich shells: the effect of core plasticity, Computers and Structures, 76 (2000),
337-346;
14. A.J.M. Ferreira and J.T. Barbosa, Buckling Behaviour of Composite Shells,
Composite Structures, Elsevier, Vol. 50 (2000), pp. 93-98;
15. A.J.M. Ferreira, A.T. Marques, and J. C. Sá, Analysis of Reinforced Concrete with
External Composite Strengthning, Composites, part B: Engineering, Elsevier, Vol.
31 (2000), pp. 527-534;
16. A.J.M. Ferreira, C.M. Castro and C. Ribeiro, Flexural Properties of Polyester Resin
Concretes, Journal of Polymer Engineering, Freund Publishing House, Vol. 20
(2000);
17. A.J.M. Ferreira, P.P. Camanho, M. Cristina Fernandes, M.A.V. Figueiredo and
A.A. Fernandes, Taguchi Analysis of Polymer Concrete Mechanical Properties ,
Journal of Composite Mechanics and Design, The Russian Academy of Sciences,
Vol. 6, No. 4 (2000);
18. J A O Simões, A T Marques, G Jeronimidis, ”Design of a controlled stiffness
composite proximal femoral prosthesis”, Composites Science and Technology, Vol.
60, (2000), pp. 559-567;
19. H. M. C. M. Santos, A. M. P. Pinto, M. C. P. L. Jacinto, and C. P. M. Sá,
“Supporting the Model of Ductile Iron Dendritic Solidification”, Advanced
Engineering Materials 2000, 2, Nº 8, pp. 514-518, 2000.
20. F. Jorge Lino, “Pull-out During Grinding of Ceramics Containing an Amorphous
Phase”, Struers Journal of Materiolography, Structure 35, pp. 18-20, 2000.
21. J. Paulo Davim, A. Monteiro Baptista, Cutting force, tool wear and surface finish in
drilling metal matrix composites, Proc. Instn. Mechanical Engineers – IMechE, Vol
215, 2001, part E, p 177-183;
22. J. Paulo Davim, Nuno Marques, A. Monteiro Baptista, Effect of carbon fibre
reinforcement in the frictional behaviour of PEEK in a water lubricated
environment, Wear, 251(2001) 1100-1104.
23. Jaime M. Monteiro; Mário A. P. Vaz; Francisco Q. Melo; J. F. Silva Gomes; “Use
of Interferometric Techniques for Measuring the Displacement Field in the plane of
274
a part-through Crack Existing in a Plate”, Int. Jour, of Pressure Vessels and Piping,
78 (2001) 253-259;
24. Francisco Q. Melo, J.A.O. Carneiro, H.R. Lopes, J.F. Dias Rodrigues, J. F. Silva
Gomes, “The Dynamic Analysis of Piping Systems using Pseudo-Dynamic
Techniques”, Journal of Strain Analysis for Engineering Design, Vol. 36-5 (2001),
pp. 441-451;
25. Simões, J. A., Vaz, M. A., Taylor, M., ”The influence of muscle simulation on the
strain distribution within the intact femur”, J. Med. Phys. Eng., Vol. 22, Nº 7, pp.
453-459, 2001;
26. Simões, J. A., Monteiro, J., Vaz, M. A., ”Numerical-experimental method for the
validation of a controlled stiffness femoral prosthesis”, J. Biomechanical Eng.,
Transactions of the ASME, Vol. 123; Jun 2001, pp. 234 –238;
27. Rui M. Guedes, Mário A. Vaz; ”Comparison of Creep Behaviour of UD and Woven
CFRP in Bending”; Journal of Mechanics of Composite Materials and Structures,
8:119-134, 2001;
28. J. A. Simões; J. Monteiro, M. A. Vaz; ”Femoral Displacement Patterns Induced by
Different Prosthesis fixation Methods: a Holographic Study”, Journal of
Biomechanics 34 (2001) S23-S28;
29. J. A. Simões; A. Morais; J. Monteiro; M. A. Vaz; M. Taylor; “Numerical and
Experimental Investigation of Bone-Implant Interfaces”; Journal of Biomechanics
34 (2001) S85-S86;
30.
A. Simões; M. A. P. Vaz; S. Blatcher, M. Taylor; “Reply to Letter to the Editor:
Influence of Head Constrain and Muscle Forces on the Strain Distribution Within
the Intact Femur”; Jour. Of Medical Engineering and Physics 23 (2001) 435-436;
31. J.A.O Simões, A.T. Marques, “Determination of stiffness properties of braided
composites for the design of a hip prothesis”, Composites, Part A: Applied Science
and Manufacturing, vol. 32, nº 5, pp. 655-662, 2001;
32. A.J. M. Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes, “Modelling of
concrete beams reinforced with FRP re-bars”, Composite Structures, vol. 53, (1),
pp. 107-116, 2001;
33. L.C. Sousa, A.J.M. Ferreira, J.M.C. Sá, ‘Elasto-plastic analysis of sandwich beams
by joint elements’, Journal of Composite Mechanics and Design, vol. 7, nº 2, 2001;
34. A.J.M. Ferreira, L.C. Sousa, ‘Modelling of sandwich structures by He use of
interface finite elements’, Scientific Bulletin of ‘Politehnica’ University of
Timisoara, Tomo 46 (60), MECANICA, 2001, pp. 13-20;
35. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Rui Neto e
Ricardo Paiva, "The Use of Finite Element Simulation for Optimization of Metal
Forming and Tool Design", Journal of Materials Processing Technology 119, pp.
152, 2001.
275
36. M. F.S.F. Moura, A.T. Marques, “Prediction of low velocity impact in carbon epoxy laminates”, Composites, Part A: Applied Science and Manufacturing, vol.
33/3, pp. 361-368, January 2002;
37. A B Morais, M. F. S. F. Moura, A.T. Marques, P.T. Castro, ‘Mode I interlaminar
fracture of carbon/epoxy cross-ply laminates’, Composites Science and
Technology, Vol. 62, No. 5, p.p. 679-686 April 2002;
38. M. C. S. Ribeiro, C. M. L. Tavares, A. J. M. Ferreira, A. T. Marques, Static flexural
performance of GFRP-polymer concrete hybrid beams, Key Engineering Materials,
Advanced Materials Forum I, Trans Tech Publications, Vol. 230-232, pp.148-151,
2002.
39. M. A. Duarte, J. Mascarenhas, A. J. M. Ferreira, J. Banhart, The evolution of
morphology and kinetics during the foaming process of aluminium foams, Key
Engineering Materials, Advanced Materials Forum I, Trans Tech Publications, Vol.
230-232, pp.96-101, 2002.
40. J. P. M. Gonçalves, M. F. S. F. de Moura, P. M. S. T. de Castro, “A ThreeDimensional Finite Element Model for Stress Analysis of Adhesive Joints”,
International Journal of Adhesion and Adhesives, Vol. 22, No. 5, pp. 357 a 36,
September 2002.
41. N Crainic, A T Marques, “Nanocomposites: a State-of-the-Art Review”, Key
Engineering Materials, Advanced Materials Forum I, Trans Tech Publications,
Vols. 230-232, pp.656-659, 2002.
42. S T Pinho, C M M P Novo, A N V Costa, A F Vieira, N A C M Correia, A T
Marques, “Permeability and compressibility tests of preforms”, Key Engineering
Materials, Advanced Materials Forum I, Trans Tech Publications, Vols. 230-232,
pp.331-334, 2002.
43. A. N. Costa, C. Novo, N. Correia, A T Marques, M. Araújo, R, Fangueiro, H. Hong,
L. Ciobanu, “Structural composite parts production from textile preforms”, Key
Engineering Materials, Advanced Materials Forum I, Trans Tech Publications,
Vols. 230-232, pp.36-39, 2002.
44. T Lafuente, J Nowacki, P Mitschang, A T Marques, M Neitzel, “Tailored blank
technology: a one – step process”, Journal of Thermoplastic Composite Materials,
Vol. 15, 4, pp. 355-371, 2002.
45.
46. E. Almeida, J.L. Esteves, “Metallic end Bonded Inserts for Pultruded FiberReinforced Plastic Rod”, Key Engineering Materials, Advanced Materials Forum I,
Trans Tech Publications, Vols. 230-232, pp. 76-79, 2002.
47. M.C.S. Ribeiro, C.M.L. Tavares, A.J.M.Ferreira – “Chemical resistance of epoxy
and polyester polymer concrete to acids and salts”, Journal of Polymer Engineering,
Freund Publishing House, Vol.22, nº1, 2002.
48. C.M.L. Tavares, M.C.S. Ribeiro, A.J.M. Ferreira, R.M. Guedes, “Creep Behaviour
of FRP-reinforced polymer concrete”, Composites Structures, 57, pp.47-51, 2002.
276
49. N Crainic, J F M G Silva, J P L G Nunes, P J P Novo, P A Q S Vieira, A T
Marques, “The influence of processing parameters in the production of glass
reinforced thermoplastic matrix towpregs”, Key Engineering Materials, 2002.
50. A. Duarte, J. Seabra, H. Santos, ADI Behaviour Under Twin-Disc Contact Fatigue
Tests, Key Engineering Materials, Vol. 230-232, 2002, pp. 218-221.
51. H. Santos, P. Duarte E J. Seabra, Austempered Ductile Iron With Tempered
Martensite, International Journal For Cast Metals Research, 15, 2002.
52. Luís C. Seabra, A. Monteiro Baptista, “Tribological Behaviour of Food Grade
Polymers Against Stainless Steel In Dry Sliding And With Sugar”, Wear, 253/3-4,
2002, 394-402.
53. F. J. G. Silva , A. P. M. Baptista , E. Pereira , V. Teixeira , Q. H. Fan , A. J. S.
Fernandes , F. Costa, “Microwave Plasma Chemical Vapour Deposition Diamond
Nucleation On Ferrous Substrates With Ti And Cr Interlayers”, Diamond And
Related Materials, 11 (2002) 1617-1622.
54. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Luis F. Menezes,
Marta C. Oliveira, Alain Col, T. Ono, “Towards Standard Benchmarks and
Reference Data for Validation and Improvement of Numerical Simulation in Sheet
Metal Forming”, Journal of Materials Processing Technology, 125-126, pg. 798805, 2002.
55. M. C. Butuc, Dorel Banabic, A. Barata da Rocha, J. J. Gracio, J. Ferreira Duarte, P.
Jurco and D.S. Comsa, “The Performance of YLD96 and BBC2000 Yield
Functions in Forming Limit Prediction”, Journal of Materials Processing
Technology, 125-126, pg. 281-86, 2002.
56. M. C. Butuc, A. Barata da Rocha, J.J. Gracio and J. Ferreira Duarte, “A More
General Model for Forming Limit Diagrams Prediction”, Journal of Materials
Processing Technology, 125-126, pg. 213-18, 2002.
57. E. F. Rauch, J. J. Grácio, F. Barlat, A. B. Lopes, J. Ferreira Duarte, “Hardening
Behavior and Structural Evolution Upon Strain Reversal of Aluminium Alloys”,
Scripta Materialia 46, pp. 881-886 2002.
58. A. J. M. Ferreira, “Thick composite beam analysis using a global meshless
approximation based on radial basis functions”, Mechanics of Advanced Materials
and Structures, Taylor & Francis, Vol. 10, Issue 4, 395-401, 2003.
59. J. M. L. Reis, R. Oliveira, A. J. M. Ferreira, A. T. Marques, “A NDT assessment of
the fracture properties of fiber reinforced polymer concrete”, Polymer Testing,
Elsevier, Vol. 22, Issue 4, pp. 395-401, 2003
60. J. M. L. Reis, A. J. M. Ferreira, “Fracture behaviour of glass fiber reinforced
polymer concrete”, Polymer Testing, Elsevier, Vol. 22, Issue 2, 149-153, 2003.
61. A. J. M. Ferreira, “A formulation of the multiquadric radial basis function method
for the analysis of laminated composite plates”, Composite Structures, Elsevier,
Vol. 59, Issue 3, 385-392, 2003.
277
62. M.C.S. Ribeiro, C.M.L. Tavares, M. Figueiredo, A.J.M. Ferreira, A. A. Fernandes,
“Bending characteristics of resin concretes”, Materials Research, Vol. 6, no. 2, 247254, 2003.
63. A. J. M. Ferreira, J. M. A. C. Sá, A. T. Marques, “Non-linear finite element analysis
of rubber composite shells”, Strength of Materials, Kluwer, Vol. 35, Issue 3, pp,
225-235, 2003.
64. A. J. M. Ferreira, “On the shear-deformation theories for the analysis of concrete
shells reinforced with external composite laminates”, Strength of Materials,
Kluwer,Vol. 35, Issue 2, 128-135, 2003.
65. M. C. S. Ribeiro, A. J. M. Ferreira, A. T. Marques, “Analysis and experiments on
GFRP-Polymer concrete hybrid beams”, Journal of Polymer Engineering, Freund
Publishing House, Vol. 23, nº 5, special issue, 2003.
66. M. C. S. Ribeiro, A. J. M. Ferreira, A. T. Marques, “Assessment of thermal
degradation on polymer mortars”, Journal of Polymer Engineering, Freund
Publishing House, Vol. 23, nº 5, special issue, 2003.
67. M.C.S. Ribeiro, J.M.L. Reis, A.J.M. Ferreira, A.T. Marques, ‘Thermal expansion of
epoxy and polyester polymer mortars. Plain polymer mortars and Fibre reinforced
polymer mortars’, Polymer Testing, Vol. 22, Issue 8, 849-857, 2003.
68. M. C. S. Ribeiro, J. M. L. Reis, A. J. M. Ferreira, A. T. Marques, “Thermal
expansion of epoxy and polyester polymer mortars - Plain mortars and fibre
reinforced mortars”, Polymer Testing, Elsevier, Vol. 22, Issue 8, 849-857, 2003.
69. J. M. L. Reis, A. J. M. Ferreira, “The influence of notch depth on the fracture
mechanics properties of polymer concrete”, International Journal of Fracture,
Kluwer, Vol. 124, Issue 1-2, 33-42, 2003.
70. J. M. L. Reis, A. J. M. Ferreira, “Fracture mechanics of polymer concrete
composites exposed to high temperature cycles”, Scientific Israel, Vol. 5, 14-19,
2003.
71. A. J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, “Analysis of composite
plates using higher-order shear deformation theory and a finite point formulation
based on the multiquadric radial basis function method”, Composites Part B:
Engineering, Elsevier, Vol. 34, 627-636, 2003.
72. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, V. Teixeira, A. P. M. Baptista, E.
Pereira, “Tribological Behaviour of CVD Diamond Films on Steel Substrates”,
Wear, 255 (2003) 846-853.
73. J. P. Nunes, J. F. Silva, A. T. Marques, N. Crainic, S. Cabral-Fonseca, “Production
of Powder Coated Towpregs and Composites”, Journal of Thermoplastic Composite
Materials, Vol. 16: nº3, p. 231-24, 2003.
74. A. B. Morais, M. F. S. F. de Moura, J. P. M. Gonçalves e P. P. Camanho, “Analysis
of Crack Propagation in Double Cantilever Beam Tests of Multidirectional
Laminates”, Mechanics of Materials, Vol. 35, Nº 7, pg. 641-652, 2003.
278
75. . P. M. Gonçalves, M. F. S. F. de Moura, A. G. Magalhães and P. M. S. T. de
Castro, “Application of Interface Finite Elements to Three-Dimensional Progressive
Failure Analysis of Adhesive Joints”, Fatigue & Fracture of Engineering Materials
& Structures, Vol. 26, pp. 479-486, 2003.
76. P. P. Camanho, C. G. Dávila, M. F. S. F. de Moura, “Numerical Simulation of
Mixed-Mode Progressive Delamination in Composite Materials”, Journal of
Composite Materials, Vol. 37, No. 16, páginas 1415-1438, 2003.
77. J. M. L. Reis, A. J. M. Ferreira, Fracture mechanics of polymer concrete composites
exposed to high temperature cycles, Scientific Israel, Vol. 5, pp. 14-19, 2003.
78. J. M. L. Reis, A. J. M. Ferreira, Evaluation of mechanical properties of fiber
reinforced epoxy polymer concrete, MECHANIKA, Nr. 6 (44), pp. 26-29, 2003.
79. A.J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, Analysis of composite plates
using higher-order shear deformation theory and a finite point formulation based on
the multiquadric radial basis function method, Composites Part B: Engineering,
Elsevier, Vol. 34, 627-636, 2003.
80. M. C. Butuc, A. Barata da Rocha, J. J. Gracio, and J. Ferreira Duarte, “Study on
Forming Limit Diagrams Prediction Using a Phenomenological and a Physical
Approach of Plasticity Theory”, J Phys. IV, Nº105, pp. 73-80, March 2003.
81. F. Jorge Lino, Teresa P. Duarte, Ricardo Maia, “Development of Coated Ceramic
Components for Aluminum Industry”, Journal of Thermal Spray Technology, Vol.
12 (2), pp. 1-8, June 2003.
82. Pedro Vasconcelos, F. Jorge Lino, R. J. Neto, Armanda Teixeira, “Glass and
Carbon Fibre Reinforced Hybrid Composites for Epoxy Tooling”, Struers Journal
of Materialography, Structure 40, pp. 3-5, 2003.
83. F. Jorge Lino, T. P. Duarte, “Ceramic Components for Foundry Industry”, Journal
of Materials Processing Technology, Vol. 142, Issue 3, pp. 628-633, 10 December
2003.
84. M. C. Butuc, J. J. Gracio, A. Barata da Rocha, “A Theoretical Study on Forming
Limit Diagrams Prediction”, J Mater. Process. Techn.,142, pp. 714-724, 2003.
85. A.B. Lopes, F. Barlat, J.J. Grácio, J. Ferreira Duarte, E.F. Rauch “Effect of texture
and microstruture on strain hardening anisotropy for aluminum deformed in
uniaxial tension and simple shear”, International Journal of Plasticity, 19, pp 1-22,
2003.
86. F. Barlat, J. Ferreira Duarte, J.J. Grácio, A.B. Lopes, E.F. Rauch “Plastic Flow for
non-monotonic loading conditions for an aluminum alloy sheet sample”,
International Journal of Plasticity 19, pp1215-1244, 2003
87. Carvalho, L.; Vaz, M. A. P.; Simões, J. A.; “Mandible strains induced by a
conventional and a novel dental implant”; Journal of Strain Analysis for
Engineering Design, Vol. 39, nº 3, 2004.
279
88. Santos, F. ; Vaz, M. A. P. ; Monteiro, J. ; “A new set-up for pulsed digital
shearography applied to defect detection in composite structures”; Optics and
Lasers in Engineering, 42, 131-140, 2004.
89. R. Moreira, J. D. Rodrigues, Constrained Damping Layer Treatments: The Finite
Element Modeling, Journal of Vibration and Control, Vol.10, Nº 1, 2004, pp. 575595.
90. S. da Mota Silva, R. Ribeiro, J.D. Rodrigues, M.A.P. Vaz, J.M. Monteiro,
Application of Genetic Algorithms for Shape Control With Pzt-Experimental
Validation, Smart Materials and Structures, Vol 13, Nº1, 2004, pp. 220 – 226.
91. J.F.D. Rodrigues, H. Lopes, F.Q. de Melo, J.A. Simões, Experimental Modal
Analysis Of A Synthetic Composite Femur, Experimental Mechanics, Vol. 44, Nº1,
2004, pp. 29-32.
92. R. de Oliveira, O. Frazão, J. Ferreira, J.L. Santos, A.T. Marques, “Optic fibre sensor
for real time damage detection in smart composite”, Computer & Structures,
Elsevier, vol. 82, issue 17-19, pp. 1315-1321, 2004.
93. P. Vieira, S. T. Pinho, A. T. Marques, A. Vieira, P. Oliveira, “Manufacture of a finbox made by RTM”, Materials Science Forum, vols. 455-456, pp.890-894, 2004.
94. P. Vieira, S. T. Pinho, A. T. Marques, A. Vieira, P. Oliveira, “Manufacture of a finbox made by RTM”, Materials Science Forum, vols. 455-456, pp.890-894, 2004.
95. Pereira, Celeste M.C., L.M.H. Carvalho, C. Blanchard and C.A.V Costa, "High
Frequency Heating of Medium Density Fiberboard (MDF): Theory and
Experiment", Chem. Eng. Sci., 59, 735-745 ,2004.
96. M. Guedes, C. M. L. Tavares, A. J. M. Ferreira, Experimental and theoretical study
of the creep behaviour of GFRP-reinforced polymer concrete, Composites Science
and Technology, Vol. 64, pp. 1251-1259, 2004.
97. J. M. L. Reis, A. J. M. Ferreira, Assessment of fracture properties of epoxy polymer
concrete reinforced with short carbon and glass fibers, Construction and Building
Materials, Elsevier, Vol. 18, pp. 523-528, 2004.
98. J. M. L. Reis, A. J. M. Ferreira, A contribution to the study of the fracture energy of
polymer concrete and fiber reinforced polymer concrete, Polymer Testing, Vol. 23,
pp. 437-440, 2004.
99. P. J. R. O. Nóvoa, M. C. S. Ribeiro, A. J. M. Ferreira, A. T. Marques, Mechanical
characterization of lightweight polymer mortar modified with cork granulates,
Composites Science and Technology, Elsevier, Vol. 64, 2197-2205, 2004.
100. AJ. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, Radial basis functions and
higher-order theories in the analysis of laminated composite beams and plates,
Composite Structures, Vol. 66, 2004, 2004.
101. P. J. R. O. Nóvoa, M. C. S. Ribeiro, A. J. M. Ferreira, A. T. Marques, Mechanical
behaviour of cork-modified polymer concrete, Materials Science Forum, Vols. 455456, pp. 805-809, 2004.
280
102. R.M. Guedes, An energy criterion to predict delayed failure of multidirectional
polymer matrix composites based on a non-linear viscoelastic model, Composites
Part A Vol 35/5 pp 559-571, 2004.
103. S. T. Pinho, P. P. Camanho, M. F. S. F. de Moura, “Numerical Simulation of the
Crushing Process of Composite Materials”, International Journal of
Crashworthiness, Vol. 9, No. 3, pp. 263-276, 2004.
104. J. M. L. Reis, A. J. M. Ferreira, Fracture energy of polymer concrete reinforced
with short carbon and glass fibers, Materials Science Forum, Vols. 455-456, pp.
810-813, 2004.
105. N. C. Correia; F. Robitaille; A.C. Long; C.D. Rudd; P Šimáček; S.G. Advani “Use
Of Resin Transfer Molding Simulation To Predict Flow, Saturation And
Compaction In The Vartm Process” ASME Journal of Fluids Engineering, Volume
126, Issue 2, pp. 210-215, 2004.
106. L. Magalhães, A. Duarte, J. Seabra, H. Santos e C. Sá., Contact Fatigue Behaviour
of Artificilly Indented Austempered Ductile Iron Discs, Materials Science Fórum,
Vols455-456 (2004) pp. 275-279, Trans Tech Publications, Switzerland, 2004.
107. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, A. P. M. Baptista, E. Pereira, “A
New Interlyer Approach For Cvd Diamond Coating of Steel Substrates”, Diamond
and Related Materials, 13 (2004) 828-833.
108. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, A. P. M. Baptista, E. Pereira,
“Unstressed PACVD Diamond Films on Steel Pre-Coated With Composite
Multilayer”, Surface and Coatings Technology, in press (2004).
109. Teresa P. Duarte, F. Jorge Lino, A. Barbedo Magalhães, Rui Neto, José M. F.
Ferreira, “Conversion of Rapid Prototyping Models into Metallic Tools by Ceramic
Moulding – an Indirect Rapid Tooling Process”, International Journal of Materials
and Product Technology,Vol. 21 Nº4, 2004.
110. Pedro Vasconcelos, F. Jorge Lino, A. Magalhães, Rui J. L. Neto, “Impact Fracture
Study of Epoxy-Based Composites with Aluminium Particles and Milled Fibres”,
accepted for publication in Journal of Materials Processing and Technology, July
2004.
111. Pedro Vasconcelos, F. Jorge Lino, António M. Baptista, Rui J. L. Neto,
“Tribological Behaviour of Epoxy Based Composites for Rapid Tooling”, accepted
for publication in Journal of the Wear, October 2004.
112. A. Santos, J. F. Duarte, Ana Reis, P. Teixeira, A. Barata Rocha, A. Ajmar, M.
Bertero, S. Saporita, “Reference Experimental Tests to be Used to Validate
Numerical Results in Sheet Metal Forming”, Materials Science Forum, TransTech
Publications, Switzerland, Vols.455-456, pp.707-710, 2004.
113. Ana Reis, Pedro Teixeira, J. Ferreira Duarte, Abel Santos, A. Barata da Rocha, A.
A. Fernandes, “Tailored Welded Blanks’ – An Experimental and Numerical Study
in Sheet Metal Forming on the Effect of Welding”, Int. Journ. Computers &
Structures, Volume 82, Issues 17-19, pp. 1435-1442, July 2004.
281
114. Ana Reis, Abel D. Santos, J. F. Duarte, Pedro Teixeira, A.Barata Rocha, M. C.
Oliveira, J. L. Alves, Luis Menezes, “Reference Experimental Results for
Validating Numerical Predictions in Sheet Metal Forming”, Journal of Materials
Processing Technology, Article in Press, Corrected Proof, 2004
115. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Estimação Temporal da
Deformação entre Objectos utilizando uma Metodologia Física”, accepted for
publication in Revista de Engenharia Eléctrica do IEEE região 9 - América Latina.
116. Luísa F. Bastos, João Manuel R. S. Tavares, “Emparelhamento de Objectos
utilizando Técnicas de Optimização”, accepted for publication in Revista de
Engenharia Eléctrica do IEEE região 9 - América Latina.
117. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Resolução da equação de
equilíbrio entre imagens de objectos deformáveis”, accepted for publication in
Revista ACE News - Applied Computing Engineering,
118. Luísa F. Bastos, João Manuel R. S. Tavares, “Técnicas de optimização na
determinação de correspondências entre objectos deformáveis”, accepted for
publication in Revista ACE News - Applied Computing Engineering.
119. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, A. P. M. Baptista, E. Pereira, BallScattering Wear Of Mpcvd Diamond Coatings On Steel With A Ni/Diamond/Cu
Composite Interlayer, accepted for publication in Vacuum.
120. L. Magalhães and J. Seabra., Artificial Indentations for the Study of Contact
Fatigue of Austempered Ductile Iron (ADI) Discs, accepted for publication in
WEAR .
121. Pedro V. Vasconcelos, F. Jorge Lino, António M. Baptista, Rui J. L. Neto,
Tribological Behaviour Ofepoxy Based Composites For Rapid Tooling, accepted
for publication in Wear.
122. R. Amaro, R. Martins, J. Seabra, N.M. Renevier e D. J. Teer, Molybdenium
Disulfide /Titanium Low Friction Coating for Gears Application, accepted for
publication in Tribology International.
123. R. Amaro, R. Martins, J. Seabra, S. Yang e D. J. Teer, Low Friction CarbonCromium Composite Coating for Gears, accepted for publication in Industrial
Lubrication and Tribology.
124. J. M. L. Reis, A. J. M. Ferreira, ‘Fracture behaviour of glass fiber reinforced
polymer concrete’, accepted for publication in Polymer Testing, Elsevier, Vol. 22,
Issue 2, April 2003, pp.149-153
125. A J M Ferreira, ‘Elasto-plastic analysis of metal foam core sandwich structures’,
accepted for publication in Journal of Composite Mechanics and Design.
126. A J M Ferreira, ‘Elasto-plastic analysis of metal foam core sandwich structures’,
accepted for publication in Journal of Composite Mechanics and Design.
127. A. J. M. Ferreira, Analysis of shear-deformable beams by the multiquadric method,
accepted for publication in Computer Assisted Mechanics and Engineering
Sciences.
282
128. C. M. C. Roque, P. A. L. S. Martins, A. J. M. Ferreira, Numerical experiments for
error evaluation in the solution of the Bernoulli Beam problem by radial basis
functions, accepted for publication in LMS Journal of Computation and
Mathematics.
129. A. J. M. Ferreira, Analysis of triangular plates using multiquadrics, accepted for
publication in, Electronic Journal of Differential Equations, Univ. Texas.
130. A. J. M. Ferreira, M. C. S. Ribeiro, A. T. Marques, “Analysis of hybrid beams of
polymer concrete and composite materials”, accepted for publication in
International Journal of Mechanics and Materials in Design.
131. J. P. Nunes, J. F. Silva, A. T. Marques, F. W. J. Van Hattum; C. A: Bernardo,
“Advances in Thermoplastic Matrix Towpreg Processing”, Journal of
Thermoplastic Composite Materials, in press.
132. R. M. Guedes, C. M. L. Tavares, A. J. M. Ferreira, Experimental and theoretical
study of the creep behaviour of GFRP-Reinforced polymer concrete, Composites
Science and Technology, in press 2003/2004.
133. M. F. S. F. de Moura, J. P. M. Gonçalves, “Modelling the Interaction between
Matrix Cracking and Delamination In Carbon-Epoxy Laminates under Low
Velocity Impact”, accepted for publication in Composites Science and Technology.
134. A.J. M. Ferreira, Polyharmonic (thin-plate) splines in the analysis of composite
plates, accepted for publication in International Journal of Mechanical Sciences.
135. A.J. M. Ferreira, M. C. S. Ribeiro, A. T. Marques, Analysis of hybrid beams of
polymer concrete and composite materials, International Journal of Mechanics and
Materials in Design, in press.
136. A.J. M. Ferreira, P. A. L. S. M. Martins, C. M. C. Roque, Solving time-dependent
engineering problems with multiquadrics, Journal of Sound and Vibration, Elsevier,
in press.
1.
P.M.M. Vila Real, P.A.G. Piloto, J.M. Franssen, M.A.P. Vaz e F.M.F. Oliveira,
Encurvadura Lateral de Vigas Metálicas Sujeitas à Accão do Fogo-Estudo
Numérico e Experimental, Mecânica Experimental, nº4, 1999, pp. 31-39;
2.
J.E. Ribeiro e J.L.S. Esteves, Estudo Fotoelástico do Campo de Tensões em
Ligações Adesivas Estruturais, Mecânica Experimental, nº4, 1999, pp. 41-50;
3.
L. Andrade Ferreira, Estudo Comparativo do Comportamento de Óleos Base e
Massas Lubrificantes em Contactos Elastohidrodinâmicos, Mecânica Experimental,
nº4, 1999, pp. 65-69;
4.
L. Magalhães, J. Seabra., Fissuração de superfícies em ferro fundido nodular
austemperado (ADI) sujeito a contactos do tipo Hertziano, Mecânica Experimental,
nº4, 1999, pp. 79-90;
283
5.
J. Castro e J. Seabra, Influência da viscosidade e da massa específica do lubrificante
na gripagem de engrenagens FZG-A, Mecânica Experimental, nº4, 1999, pp. 91100;
6.
A.J.M. Ferreira, A.T. Marques, J. César de Sá e J.A.T. Barbosa, Validação
Experimental de Modelos de Cálculo de Estruturas Sandwich, Mecânica
Experimental, nº4, 1999, pp. 101-109;
7.
J.A. Simões e A.T. Marques, Determinação de Propriedades de Rigidez de
Compósitos de Matriz de Epóxido Reforçados com Fibra Entrelaçada, Mecânica
8.
J. Monteiro; M. A. P. Vaz; J. A. Chousal; "Utilização de Técnicas Holográficas no
Estudo de Vibrações", Cadernos CEFAT, Ano 1, nº 1, 1999.
9.
Teresa P. Duarte, F. Jorge Lino Alves e Rui J. L. Neto, “Utilização de Moldações
Cerâmicas no Fabrico de Moldes Metálicos”, O Molde 39, Revista da Associação
da Indústria de Moldes, Ano 12, pp. 32-41, 1999.
10. Rui Neto, “Fabricação de Objectos por Camadas-LOM”, O Molde, Revista da
Associação da Indústria de Moldes 39, Ano 12, pp. 18-19, 1999.
11. Rui Neto, “Tecnologias de Conversão por Fundição a Partir de Protótipos Rápidos”,
O Molde, Revista da Associação da Indústria de Moldes 39, Ano 12, pp. 24-25,
1999.
12. Joaquim A.O. Carneiro, Hernani R Lopes, Francisco J.M.Q. de Melo, José F. Dias
Rodrigues e J.F. Silva Gomes, “Análise de Estruturas de Tubagens sob Solicitação
Sísmica Usando Técnicas Pseudodinâmicas”, Revista Portuguesa de Engenharia de
Estruturas, Nº 48 (2000), pp. 49-57;
13. J.F.M.G. Silva e A.T. Marques, Estudo do Comportamento ao Impacto de Tubagem
Produzida por Enrolamento Filamentar, Mecânica Experimental, nº5, 2000, pp. 1-6;
14. J. Rodrigues, H. Lopes, F. Melo e J. Simões, Análise modal de um modelo femoral
compósito, Mecânica Experimental, nº5, 2000, pp. 35-41;
15. J.P. Davim e A.P.Monteiro Baptista, Uma Abordagem ao Desgaste das Ferramentas
e à sua Relação com as Forças de Corte em Processos de Maquinagem, Mecânica
16. N.F. Rilo, M.A.P. Vaz, J.F. Silva Gomes, R.A.P. Leal e J.M. Sousa Cirne, A
Avaliação do Dano em Materiais Compósitos Laminados e a Investigação no
LOME (FEUP) e no GME (CEMUC-FCTUC), Mecânica Experimental, Nº 5
(2000), pp. 69-81;
17. L. A. Ferreira, Jorge Poço, Aspectos relevantes da manutenção actual: Suas
implicações técnicas e económicas, INGENIUM, 2ª série, nº 51, Setembro de 2000,
pp.89-92;
18. Rui Neto, “Fabricação de Objectos por Camadas de Papel”, em Rede Nacional de
Prototipagem Rápida, Comunicações Apresentadas na Acção de Divulgação do
Projecto RNPR, O MOLDE, Ano 13, Nº 45, pp. 28-33, Setembro 2000.
284
19. Projecto Mobilizador RNPR, “A Prototipagem Rápida”, Tecnometal 129, pp. 5-17
Julho/Agosto 2000.
20. F. Jorge Lino, Rui J. L. Neto, M. Teresa Vasconcelos, Pedro V. Vasconcelos,
Acácio V. Pereira e Elisabeth C. Silva, “Diluição de Fronteiras Entre o Design e a
Indústria Através da Prototipagem Rápida – Um Caso de Estudo”, Cadernos
Empresariais 7, Ano 2, pp. 58-63, 2000.
21. Fernando Jorge Lino Alves, “Effect of the Bridging Mechanism on Ceramics
Toughness”, Ciência e Tecnologia dos Materiais, Revista da SPM (Sociedade
Portuguesa de Materiais), Vol 12 Nº 2, pp. 10-15, 2000.
22. Rui Neto, Ricardo Paiva, Projecto Mobilizador RNPR “Fabricação de Objectos por
Camadas”, Tecnometal 129, pp. 10-13, Julho/Agosto 2000.
23. Rui Neto, Ricardo Paiva, Projecto Mobilizador RNPR “Tecnologias de Conversão
por Fundição a Partir de Protótipos Rápidos”, Tecnometal 129, pp. 14-15,
Julho/Agosto 2000
24. C.M.L. Tavares, R.J.C.M. Guedes e A.J.M. Ferreira, Análise do Comportamento de
Betões Poliméricos Reforçados com Varões de Materiais Compósitos Sujeitos a
Fluência em Flexão, Mecânica Experimental, nº6, 2001, pp. 63-68;
25. J. Claro e L.A. Ferreira, Aplicação da Mecânica da Fractura ao Estudo de Contactos
Elastohidrodinâmicos, Mecânica Experimental, nº6, 2001, pp. 109-116;
26. P. Cardoso e L.A. Ferreira, TPM – Implementação em Unidade Industrial,
Manutenção, vol. nº 68, Março de 2001, pp. 18-23;
27. Monteiro e L.A. Ferreira, Uma Análise da Fiabilidade, Manutilidade e
Disponilidade de Equipamentos na Indústria Automóvel, Manutenção, vol. nº 69,
Junho de 2001, pp. 12-17;
28. Ferreira, F. J.; Vaz, M. A. P.; Melo, F. Q. E Cirne, J. S.;”Caracterização Mecânica
de Materiais Compósitos a Elevadas Razões de Deformação”, Revista
“MANUTENÇÃO”, 3º e 4º trimestres de 2001;
29. L.A. Ferreira, Lubrificação com Massa versus Lubrificação a Óleo, Ciência &
Tecnologia dos Materiais, vol. 13,nº 4, Dezembro de 2001, pp. 20-23;
30. A J M Ferreira, MC Tavares, C Ribeiro, A Vieira, ‘Caracterização mecânica em
flexão de betões de resina’, Revista Portuguesa de Engenharia de Estruturas, Nº 48,
2001, pp. 71-76;
31. A J M Ferreira, MC Tavares, C Ribeiro, A Vieira, ‘Resistência química dos betões
de resina aos ácidos e aos sais’, Revista Portuguesa de Engenharia de Estruturas, Nº
49, 2001, pp. 49-54;
32. A J M Ferreira, J Reis, ‘Análise duma junta de material compósito’, Revista
Portuguesa de Engenharia de Estruturas, Nº 50, 2001;
33. F. Jorge Lino Alves e João Rocha, “Fabrico de Ferramentas Metálicas Utilizando
Moldações Cerâmicas Compósitas”, O Molde 48, Ano 14, pp. 37-48, Março 2001.
285
34. Pedro Vasconcelos, F. Jorge Lino e Rui J. Neto, “O Fabrico Rápido de Ferramentas
em Engenharia Concorrente”, TECNOMETAL 136, pp. 17-21, Setembro/Outubro
2001.
35. F. Jorge Lino, Rui J. L. Neto, M. Teresa Vasconcelos, Pedro V. Vasconcelos, M. J.
Azevedo, Acácio V. Pereira e Elisabete C. Silva, “Design Interaction with Industry
Through Rapid Prototyping ”, Ciência e Tecnologia dos Materiais, Revista da SPM,
Sociedade Portuguesa de Materiais, Vol. 13 – N.º 4, pp. 40-45, Outubro - Dezembro
2001.
36. Campos, A. Sottomayor, J. Castro e J. Seabra, Modelização do contacto linear
rugoso em lubrificação mista, Mecânica Experimental, Nº7, 2002, pp. 61-69;
37. L. Saleiro, J.L. Esteves, “Um Problema de Manutenção em Componentes de
Viaturas de Recolha de Resíduos Sólidos Urbanos”, Revista Manutenção,
Associação Portuguesa de Manutenção Industrial, Nº73, pp. 4-11, 2002.
38. M. A. Duarte, A. J. M. Ferreira, J. Banhart, ‘Espumas metálicas - Processos de
fabrico, Propriedades e Aplicações, Parte II- Propriedades e Aplicações’, Ciência e
Tecnologia dos Materiais, Sociedade Portuguesa de Materiais, Vol. 14, Nº2/3, 3545, 2002.
39. A Vieira, J Reis, A T Marques, J A O Simões, “Influência da rigidez material da
prótese femoral nas microextensões desenvolvidas na superfície do fémur”,
Mecânica Experimental, nº 7, pp. 129-134, 2002.
40. O. Frazão, F. M. Araújo, I. Dias, A N. Costa, A T Marques, “Roseta extensométrica
óptica rectangular”, Mecânica Experimental, nº 8, pp. 109-112, 2002.
41. M. A. Duarte, A. J. M. Ferreira, J. Banhart, ‘Espumas metálicas - Processos de
fabrico, Propriedades e Aplicações, Parte I- Processos de fabrico’, Ciência e
Tecnologia dos Materiais, Sociedade Portuguesa de Materiais, Vol. 14, Nº2/3, 2734, 2002
42. R. Martins e J. Seabra, Simulação do desempenho energético de uma caixa transfer,
Mecânica Experimental, Nº8, 2002, pp. 31-40;
43. L. Magalhães e J. Seabra, Fadiga de contacto de engrenagens FZG em ferro nodular
austemperado, Mecânica Experimental, Nº8, 2002, pp. 19-30;
44. R. Neves, B. Graça e J. Seabra, Desgaste e contaminação num contacto EHD
lubrificado com massa, Mecânica Experimental, Nº7, 2002, pp. 71-76;
45. R.A. S. Moreira e J.F. Dias Rodrigues, Modelização e validação experimental do
comportamento dinâmico de placas com tratamento passivo por amortecimento
viscoelástico, Mecânica Experimental, Nº7, 2002, pp. 93-102;
46. P. A. G. Piloto, P. J. M. M. F. Vila Real, M. A. P. Vaz, Análise Experimental e
Numérica da Influência das Condições de Apoio na Encurvadura Lateral de Vigas
Metálicas, Mecânica Experimental, Nº7, 2002, pp. 103-1129;
47. J. A. Guedes, J. Monteiro, M. A. Vaz, J. A. Simões , Determinação da Diferença
Relativa do Campo de Deslocamentos entre o Fémur Intacto e com Próteses do
286
Tipo Press-Fit Colocadas com Aperto e com Folga, Mecânica Experimental, Nº7,
2002, pp. 123-128;
48. Fonseca, E.M.M.; Mesquita, L.R.; Caleiro, C.; Lopes, H.; Vaz. M.A.P.,
Determinação do Factor Concentração de Tensões em Placas Utilizando a
Extensometria com Comparação Numérica, Mecânica Experimental, Nº8, 2002, pp.
49-54;
49. L. Carvalho, J. A. Simões, M. A. Vaz, Determinação de Extensões Dinâmicas
Sobre uma Mandíbula Cadavérica, Mecânica Experimental, Nº8, 2002, pp. 85-90;
50. João Manuel R. S. Tavares, J. Barbosa, A. Jorge Padilha, “Análise de Movimento
não Rígido em Visão por Computador”, RESI – Revista Electrónica de Sistemas de
Informação – ISSN: 1677-3071, Ed. 1: Volume 01 - Nº 01 - Novembre 2002;
51. João Manuel R. S. Tavares, J. Barbosa, A. Jorge Padilha; “Apresentação de um
Banco de Desenvolvimento e Ensaio para Objectos Deformáveis”; RESI – Revista
Electrónica de Sistemas de Informação – ISSN: 1677-3071, Edição 1: Volume 01 Nº 01 - Novembre de 2002.
52. João Carneiro, A. Pessoa Magalhães, J. Ferreira Duarte e A. Barata da Rocha,
“Modelação e Controlo de um Máquina “Bulge””, Robótica 46, 1º Trimestre, pp.
20-25, 2002.
53. Rui J. Neto e F. Jorge Lino, “A Prototipagem Rápida na Indústria Portuguesa”,
Tecnometal, Nº 143, pp. 13-19, Novembro/Dezembro 2002.
54. F.P. Peito, J.L. Esteves, “Diferentes Metodologias de Controlo e Análise de
Avarias em Tubos de PRFV”, Revista Manutenção, Associação Portuguesa de
Manutenção Industrial. Nº77, pp.4-13, 2003.
55. Ferreira, F., M. A. P. Vaz, Simões, J. A., ”Caracterização de osso cortical bovino a
elevadas taxas de deformação”, Revista Ciência & Tecnologia dos Materiais, 2003;
56. Cândida Pinto Coelho, João Manuel R. S. Tavares, “Técnicas Base para Aquisição
de Informação Tridimensional sem Contacto: Uma Descrição”, RESI – Revista
Electrónica de Sistemas de Informação – ISSN: 1677-3071, Ed. 2: Volume 02 - Nº
01 - Julho de 2003.
57. A. Barata da Rocha, F. Jorge Lino, “INEGI – Instituto de Engenharia Mecânica e
Gestão Industrial, 17 Anos de Actividade em Inovação e Desenvolvimento
Tecnológico”, Tecnometal, Nº 144, pp. 19-24, Janeiro/Fevereiro de 2003.
58. F. Jorge Lino, Rui J. Neto, “A Prototipagem Rápida na Indústria Portuguesa”,
artigo convidado para o Boletim da Ordem dos Engenheiros da Região Norte, Nº 1,
pp. 13-14, Janeiro/Março de 2003.
59. F. Jorge Lino, Rui J. Neto, “A Prototipagem Rápida na Indústria Cerâmica,
Comparação com Outros Sectores Industriais”, artigo convidado para a Revista
Kéramica, Ano XXVIII, Nº 260, pp. 14-28, Julho/Agosto de 2003.
60.
Ricardo Paiva, Rui Neto, “A Utilização da Estereolitografia no Fabrico Rápido de
Protótipos Metálicos e Moldes para Injecção de Termoplásticos”, O Molde, Nº 62,
pp. 44-45, Junho de 2004.
287
61. Ricardo Paiva, Rui J. Neto, Pedro Lacerda, Carlos Soares, “O Fabrico Rápido de
Ferramentas de Fundição em Areia Utilizando as Tecnologias de Prototipagem
Rápida”, aceite para publicação na revista Fundição, Associação Portuguesa de
Fundição, Outubro de 2004.
62. Ricardo Ferreira, João Manuel R. S. Tavares, Francisco Freitas,”Comando de um
Servomecanismo usando Visão Computacional”, accepted for publication in
Revista Robótica, 2004.
63. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Simulação Física da
Transformação entre Objectos através da Resolução da Equação Dinâmica de
Equilíbrio em Imagens”, accepted for publication in “Mecânica Experimental”,
Associação Portuguesa de Análise Experimental de Tensões (APAET).
64. Luísa F. Bastos, João Manuel R. S. Tavares, “Utilização de Modelação Física e
Técnicas de Optimização na Determinação de Correspondências entre Nodos de
Objectos no Espaço Modal”, accepted for publication in “Mecânica Experimental”,
Associação Portuguesa de Análise Experimental de Tensões (APAET).
65. Cândida Pinto Coelho, João Manuel R. S. Tavares, “Introdução às Técnicas para
Levantamento de Forma Tridimensional Sem Contacto”, accepted for publication in
“Mecânica Experimental”, Associação Portuguesa de Análise Experimental de
Tensões (APAET).
66. J. A. Simões, A. T. Marques, A Trigo Cabral, ”Estudo numérico pelo método dos
elementos finitos do desempenho biomecânico entre as próteses cimentada,
osteopenetrada e press-fit”, accepted for publication in Rev Port Ortop Traum.
67. A. G. de Magalhães, M. F. S. F. de Moura, “Aplicação do Método de Emissão
Acústica ao Estudo do Comportamento de Juntas Coladas de Materiais Compósitos
Sujeitas a Fluência”, accepted for publication in revista Mecânica Experimental.
68. A. Vieira, O. Frazão, C. Novo, J. A. Simões “Sensores Bragg em fibra óptica para
substituir extensometros na determinação de extensões em aplicações da
biomecânica”, accepted for publication in revista Mecânica Experimental.
69. M. Gomes, R. Guedes, J. A. Simões, “Caracterização mecânica do cimento ósseo
Subiton Quirúrgico RO para fixação de próteses de anca”, accepted for publication
in revista Mecânica Experimental.
70. J. M. Reis, J. C. Potes, L. Fialho, F. C. Silva, A. Cabrita, A.T. Marques, J. A.
Simões, 2003, ”Estudo animal de próteses de anca em compósito PEEK-Carbono”,
accepted for publication in Rev Port Ortop Traum.
71. J. M. Reis, J. C. Potes, L. Fialho, F. C. Silva, A.T. Marques, J. A. Simões, ”Estudo
in vitro da citoxicidade do compósito de PEEK-Carbono”, accepted for publication
in Ciência & Tecnologia dos Materiais.
288
1.
F.Q. Melo, J.O. Carneiro and J.F. Silva Gomes, “Pseudo-Dynamic Techniques in
Structural Analysis and Design”, IRF’99 International Conference on Integrity,
Reliability and Failure, Porto/Portugal, 19-22 July 1999.
2.
J.O. Carneiro, H. Lopes,J.D. Rodrigues, F.Q. Melo, and J.F. Silva Gomes, “The
Dynamic Analysis of a Piping System Detail Using Pseudodynamic Techniques”,
IRF’99 International Conference on Integrity, Reliability and Failure,
Porto/Portugal, 19-22 July 1999;
3.
J.O. Carneiro,J.D. Rodrigues, F.Q. Melo, and J.F. Silva Gomes, “Vibration
Analysis of a Beam Using Modal Dynamic Approach and Pseudodynamic
Techniques”, IRF’99 International Conference on Integrity, Reliability and Failure,
4.
F.Q. Melo, J. Monteiro, M.A.P. Vaz and J.F. Silva Gomes, “Assessment of the
stress-intensity factor of a part-through crack in a plate by holographic
interferometry”, IRF’99 International Conference on Integrity, Reliability and
Failure, Porto/Portugal, 19-22 July 1999;
5.
J.A. Chousal and J.F. Silva Gomes, “Image Processing Aided Shearography for
Composite Materials: Non-Destructive Damage Detection”, IRF’99 International
Conference on Integrity, Reliability and Failure, Porto/Portugal, 19-22 July 1999;
6.
J.A. Chousal and J.F. Silva Gomes, “Speckle Interferometry Phase Determination in
Transient Problems”, IRF’99 International Conference on Integrity, Reliability and
7.
N.F. Rilo, J.M. Cirne and J.F. Silva Gomes, “On Reliability of Spherical Pressure
Vessel Support Design by BS and ASME Codes”, IRF’99 International Conference
on Integrity, Reliability and Failure, Porto/Portugal, 19-22 July 1999;
8.
J.M. Cirne, A. Amaro, N.F. Rilo, M.T. Vieira, M.A.P. Vaz and J.F. Silva Gomes,
“Young’s Modulus of Tungsten using Holographic Interferometry and Finite
Element Techniques”, IRF’99 International Conference on Integrity, Reliability and
9.
J.M. Monteiro, J.A.O. Simões, M.A.P. Vaz and J.F. Silva Gomes, “Holographic
Interferometry of Bone Implant Interface”, IRF’99 International Conference on
Integrity, Reliability and Failure, Porto/Portugal, 19-22 July 1999;
10. J.A.O. Simões, J.A.O. Monteiro, M.A.P. Vaz, M.A. Taylor and M. Blatcher. “Study
with Holographic Interferometry of Bone-Implant Interface”. IRF’99-International
Conference on Integrity, Reliability and Failure, Porto-Portugal, 19-22 July 1999;
11. R. Marini, M. A. P. Vaz, et al; "Non Destructive Testing of Composite Sandwich
Panels Using Optical Interferometric Patterns"; International Conference on
"Emerging Techniques in NDT", Atenas, Maio de 1999.
289
12. M. A. P. Vaz; “As técnicas de Mecânica Experimental no apoio ao projecto de
Engenharia”; 1º Congresso Luso-Moçambicano de Engenharia, 14 a 16 de
Setembro de 1999, Maputo, Moçambique.
13. A.J.M. Ferreira, A.T. Marques and J.D.C. Sá, Modelling of Honeycomb Structures
by Finite Element Method, IRF’99 International Conference on Integrity,
Reliability and Failure, Porto/Portugal, 19-22 July 1999;
14. A.N. Costa and A.T. Marques, Full-Scale Testing of Underground Composite
Tanks, IRF’99 International Conference on Integrity, Reliability and Failure,
15. A.J.M. Ferreira, P.P. Camanho, A.T. Marques, J.D.C. Sá and A.A. Fernandes,
Analysis of RC Beams Reinforced with FRP Re-bars by Finite Elements, IRF’99
International Conference on Integrity, Reliability and Failure, Porto/Portugal, 19-22
July 1999;
16. A.J. M. Ferreira and J.T. Barbosa, Buckling Behaviour of Composite Shells, IRF’99
July 1999;
17. P.P. Camanho, R.M. Guedes and A.J.M. Ferreira, Flexural Behaviour of Polymer
Mortar, IRF’99 International Conference on Integrity, Reliability and Failure,
18. A.N. Costa and A.T. Marques, Optimum Design of Underground Composite Tanks,
IRF’99 International Conference on Integrity, Reliability and Failure,
19. J.M.M.C. Marques and A.J.M. Ferreira, Finite/Infinite Element Modelling of
Wrinkling Phenomena in Thick Core Sandwich Structures, IRF’99 International
Conference on Integrity, Reliability and Failure, Porto/Portugal, 19-22 July 1999;
20. L.C. Costa and A.J.M. Ferreira, Modelling of Cracked Sandwich Specimen, IRF’99
July 1999;
21. A.J.M. Ferreira, P.P. Camanho and A.A. Fernandes, Highly Durable Precast Special
Concrete Reinforced with Non-metallic Rebars, EUROMAT 99, Munchen, 1999;
22. A.J.M. Ferreira, A.T. Marques and J.C. Sá, A Third-Order Approach for the
Reinforcement of Concrete Shells with External Composite Laminates, ICCM 12,
Paris, France, 5-12 July 1999;
23. F Collombet, L Guillaumat, J L Lataillade, P Davies and A T Marques, “Study of
impacted composite structures by means of the response surface methodology”,
12th International Conference on Composite Materials – ICCM 12, Paris, France, 59 July 1999;
24. L F P Juvandes, J A Figueiras, A T Marques, “Tests on RC beams strengthened
with CFRP laminates”, International Conference of Infrastructure Regeneration and
Rehabilitation, Improving the Quality of Life Through Better Construction - A
290
Vision for the Next Millenium, University of Sheffield, Sheffield, UK, 28 June–2
July 1999, pp. 973-982;
25. A.T.Almeida, J.M.Paiva, J.L.Esteves, J.G.Fiuza, “Integrated Design of an
Economical Vehicle throughout the Mechanical Engineering Curriculum of a
Polytechnic School”, COBEM 99 Brazilian Congress of Mechanical Engineering,
Campinas 22-26 November 1999;
26. Rui Miranda Guedes, Assessment of Time-Temperature Superposition Principle as
a Basis for a Long Term Behaviour Prediction of CRFP under Bending Load,
International Conference on Recent Developments in Durability Analysis of
Composite Systems, DURACOSYS 99, Brussels, 11-14 July, 1999;
27. L. Ferreira and M. Mata, Morphologic analysis of fatigue failures (spalling) in
grease lubricated contacts, Proceedings da 2nd COST 516 Tribology Symposium,
Antwerpen, Bélgica, Maio de 1999;
28. L. Ferreira, Reliability assessment methods., Proceedings of “Integrity, Reliability
and Failure Conference”, Porto, Portugal, Julho de 1999;
29. J. Rodrigues e R. Moreira, Passive damping control of plates with viscoelastic
layers: Experimental study on dynamic cgaracteristics and radiated noise (Keynote
lecture), Proceedings of “Integrity, Reliability and Failure Conference”, Porto,
Portugal, Julho de 1999;
30. J. Rodrigues e R. Moreira, Constrained viscoelastic layer damping treatments:
Location and extension effect, Proceedings of “Integrity, Reliability and Failure
Conference” Porto, Portugal, Julho de 1999;
31. R. Ribeiro, S. Silva, M. Vaz e J. Rodrigues, CFRP structures for particle detectors,
Proceedings of “Integrity, Reliability and Failure Conference”, Porto, Portugal,
Julho de 1999;
32. J. Davim e A. Baptista, Drilling metal matrix composites. Experimental study of the
evolution of the cutting forces, tool wear and hole’s surface finish with the cutting
time, Proceedings of “Integrity, Reliability and Failure Conference”, Porto,
Portugal, Julho de 1999;
33. L. Ferreira, RCM – Reliability Centred Maintenance,
MAINTEC’99, Lisboa, Portugal, Novembro de 1999;
Proceedings
of
34. Pedro V. Vasconcelos, F. J. L. Alves e José M. F. Ferreira , “Processamento e
Beneficiamento de Materiais Porosos à Base de Diatomite”, 2º Congresso LusoMoçambicano, Moçambique, Setembro 1999.
35. José M. F. Ferreira, Marta I. L. L. Oliveira e Fernando J. L. Alves, “Design of
Porous Microstructures by Starch Consolidation”, 2nd ESAFORM Conference on
Material Forming, Guimarães, Portugal, 13-17 April, pp. 559-62, 1999.
36. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Rui Neto,
Ricardo Paiva ,“The Use of Finite Element Simulation for Optimization of Metal
Forming and Tool Design”, Proceedings of AMPT’99 and IMC16, pg. 241-248,
291
School of Mechanical & Manufacturing Engineering, Dublin City University,
Republic of Ireland, 3-6, August, 1999.
Ricardo Paiva, “A Simulação Numérica por Elementos Finitos na Optimização de
Processos de Conformação Plástica “, Proceedings of “1º Congresso LusoMoçambicano de Engenharia”, Maputo, Mozambique, 14-16 September 1999.
Ricardo Paiva, “Finite Element Simulation of Closed Die Forging for Prediction of
Material Behaviour and Optimization of Process”, Proceedings of 2nd ESAFORM
Conference on Material Forming, pg. 295-298, Minho Univesity, Portugal, 12 -16,
April 1999.
39. J. J. Grácio, F. Barlat, J. Ferreira Duarte, “Plasticity of Aluminum 1050 During
Non-Proportional Loading”, ICTP’99 - International Conference of Technology of
Plasticity, Germany, September 1999.
40. Duarte, H. Santos e J. Seabra, Influence of specific austempering heat treatment on
the contact fatigue behaviour of a CuMn ADI, JUNIOR-EUROMAT, Deutsche
Gesellschaft fur Materialkunde E.V., Lausanne, Switzerland, 28 de Agosto a 1 de
Setembro de 2000;
41. L. Magalhães, J. Seabra e C. Sá, Contact fatigue behaviour of artificially indented
ADI discs, Proceedings of the 27th "Leeds-Lyon Symposium" on Tribology, Lyon,
França, 5 a 8 de Setembro de 2000;
42. P. Branco, L. A. Ferreira, Introdução às técnicas termográficas, Actas do 15º
Congresso Brasileiro de Manutenção, Vitória, Brasil, 15 a 17 de Setembro de 2000;
43. Rui Ribeiro, Suzana da Mota Silva, J. Dias Rodrigues, Mário A. Vaz, Genetic
algorithms for optimal design and control of adaptive structures, SPIE’s 7th
International Symposium on Smart Structures and Materials, 5-9 March 2000,
Newport Beach, Proc. SPIE Vol. 3984, pp.268-278;
44. Rui A. S. Moreira, José Dias Rodrigues, Partial Viscoelastic Surface Damping
Treatments, International Conference on Mechanics and Materials in Design,
Orlando 2000;
45. N. Costa, A. Torres Marques, C. Novo, N. Correia, O. Frazão, F. M. Araújo and I.
Dias, Monitoring the RTM Process Through Optical Fibres; International
Conference on Mechanics & Materials In Design (M2D), Orlando, USA, 29 a 31
Maio 2000;
46. Simões, J. A., Vaz, M. A., ”The influence of hip prosthesis material stiffness on
induced femoral strains”, Proc. of the 3rd International Conference on Mechanics &
Materials in Design, 29-31 May, S. A. Meguid, ed., Orlando, pp. 151-153, 2000;
47. Simões, J. A., Monteiro, J., Chousal, J. A., Vaz, M. P., Taylor, M., ”Strain patterns
adjacent to bonded and debonded bone-implant interfaces: A holographic study of
an idealised proximal femur”, Proc. of the 12th Conference of the European Society
of Biomechanics, 28-30 August, P. J. Prendergast, T. C. Lee and A. J. Carr, eds.,
Dublin, pp. 201, 2000;
292
48. Costa, L.A.; Oliveira, P.; Leal, R.P; Cirne, J.M.; Rilo, N.F., Vaz,
M.A.P.;”Optimization of a composite laminated plate by genetic algorithms with a
multicriterion objective”, Proc. of the 3rd International Conference on Mechanics &
49. Guedes, R.M.; Vaz, M.A.P.; “Fiber reinforced polymers for highly stable
structures"” Proc. of the 3rd International Conference on Mechanics & Materials in
Design, 29-31 May, S. A. Meguid, ed., Orlando, pp. 97-98, 2000;
50. Martins, T.L., Monteiro, J.; Melo, F.Q.; Vaz, M.A.P.,”Characterization of directions
of materials orthotropy in carbon-epoxi plates using modal analysis”, Proc. of the
3rd International Conference on Mechanics & Materials in Design, 29-31 May, S.
A. Meguid, ed., Orlando, pp. 1207-208, 2000;
51. Amaro, J.S.; Cirne, J.M.; Rilo, N.F.; Vaz,M.A.P.; “An analytical and experimental
investigation for the evaluation of demage in composite laminate plates”, Proc. of
the 3rd International Conference on Mechanics & Materials in Design, 29-31 May,
S. A. Meguid, ed., Orlando, pp. 237-238, 2000;
52. Rilo, N.F.; Vaz, M.A.P.; Peixinho, N.; Cirne, J.M.; Leal, R.A.; “Test method for in
plane shear modulus determination of composite laminates using vibration of
cantilevered plates and ESPI”; Proc. of the 3rd International Conference on
Mechanics & Materials in Design, 29-31 May, S. A. Meguid, ed., Orlando, pp. 262263, 2000;
53. J.A. Chousal, J.F. SilvaGomes, “Measuring Large Displacements by Image
Processing Correlation”, M2D, 3rd International Conference on Mechanics &
Materials in Design, Orlando 2000;
54. J. Barbosa, J. Tavares, J. Padilha, Parallel Image Processing System on a Cluster of
Personal Computers, VECPAR 2000 - 4th International Meeting on Vector and
Parallel Processing, FEUP, Porto, Portugal 21-23 June 2000;
55. J. Barbosa, J. Tavares, J. Padilha, Linear Algebra Algorithms in Heterogeneous
Cluster of Personal Computers, HCW 2000 - 9th Heterogeneous Computing
Workshop, Cancun, México, 1 May 2000 (IEEE CS Press);
56. João Manuel R. S. Tavares, J. Barbosa and A. Jorge Padilha, Matching Image
Objects in Dynamic Pedobarography, RecPad 2000 - 11th Portuguese Conference
on Pattern Recognition, FEUP, Porto, Portugal, 11-12 May 2000;
57. O. Frazão, N. Correia, C. Novo, A. Vieira, A. N. Costa, F. M. Araújo, and A. T.
Marques, Optical Fibre Embedded in a Composite Laminated with Applications to
Sensing, BIANISOTROPICS 2000, Lisboa, 27 a 29 Setembro 2000;
58. C. Novo, O. Frazão, F.M. Araújo, A.N. Costa, A.Vieira, N.Correia, I.Dias and A.T.
Marques, Progression Monitoring of the Flow Front in RTM Process Using Fibre
Bragg Grating Sensors; 14th International Conference on Optical Fiber Sensors,
Veneza, Itália, 11 a 13 Outubro 2000;
59. N. Correia, A. Vieira, A.N. Costa, A.T. Marques, Rui Ribeiro, Design and
Production of an Alignment System for CERN; European Conference on Spacecraft
293
Structures, Materials and Mechanical Testing, Noordwijk, Holanda, 29 Novembro a
1 Dezembro 2000;
60. N. Costa, N. Correia, A. Vieira, A.T. Marques, Projecto e Produção de um Sistema
de Alinhamento de Instrumentação para o CERN; XIV Congreso Nacional de
Ingeniería Mecânica, Leganés, Espanha, 13 a 15 Dezembro 2000;
61. A.J.M. Ferreira, A. A. Fernandes, Overview of approaches to modelling, DOGMA
Final Event, Holanda, 2000;
62. A T Marques, ‘Europe: Accéleration de Partenariat’ , “AEROSOLUTIONS –
Marché Européen des Techniques et Matériaux de Demain”, Bordeuax, France, 2729/6/2000;
63. A N Costa, A T Marques, C Novo, N Correia, O Frazão, F M Araújo, I Dias,
“Monitoring the RTM Process Through Optical Fibres”, MECHANICS &
MATERIALS IN DESIGN (M2D), Orlando, USA, 29 – 31 May 2000;
64. J P Nunes, J F Silva, L Silva, A T Marques, P J Novo, "The Development of a Dry
Coating Process to Produce Glass Reinforced Thermoplastic Matrix Towpregs", 9th
European Conference on Composite Materials-ECCM 9, Brighton, United
Kingdom, 4 – 7 June 2000;
65. A T Marques, J F Silva, A B de Morais, P T de Castro. "Fracture Mechanics
concepts and structural integrity of filament wound pipes", 13th European
Conference on Fracture (ECF-13) CD-ROM, September 2000, ELSEVIER Science;
66. O. Frazão, N Correia, C Novo, A Vieira, A N Costa, F M Araújo, A T Marques,
“Optical Fibre Embedded in a Composite Laminated with Applications to
Sensing”BIANISOTROPICS 2000, Lisboa, Portugal, 2000;
67. C Novo, O Frazão, F M Araújo, A N Costa, A Vieira, N Correia, I Dias, A T
Marques, “Progression Monitoring of the Flow Front in RTM Process Using Fibre
Bragg Grating Sensors”, 14th International Conference on Optical Fiber Sensors,
Veneza, Itália, 11 – 13 October 2000;
68. N Correia, A Vieira, A N Costa, A T Marques, R Ribeiro, “Design and Production
of an Alignment System for CERN”, European Conference on Spacecraft
Structures, Materials and Mechanical Testing, Noordwijk, Holanda, 29/11 – 1/12/
2000;
69. A N Costa, N Correia, A Vieira, A T Marques, XIV Congreso Nacional de
Ingeniería Mecânica, Leganés, Espanha, 13 – 15 December2000;
70. Simões, J. A., Vaz, M. A., ”The influence of hip prosthesis material stiffness on
induced femoral strains”, Proc. of the 3rd International Conference on Mechanics &
71. Simões, J. A., Monteiro, J., Chousal, J. A., Vaz, M. P., Taylor, M., ”Strain patterns
adjacent to bonded and debonded bone-implant interfaces: A holographic study of
an idealised proximal femur”, Proc. of the 12th Conference of the European Society
of Biomechanics, 28-30 August, P. J. Prendergast, T. C. Lee and A. J. Carr, eds.,
Dublin, pp. 201, 2000;
294
72. Monteiro, J. M., Vaz, M., Simões, J. A., “Study using interferometry speckle of the
influence of implant-bone interface fixation conditions”, 5th Portuguese Conference
on Biomedical Engineering, 26-27 May, Coimbra, 2000;
73. Costa, L.A.; Oliveira, P.; Leal, R.P; Cirne, J.M.; Rilo, N.F., Vaz,
M.A.P.;”Optimization of a composite laminated plate by genetic algorithms with a
multicriterion objective”, Proc. of the 3rd International Conference on Mechanics &
74. Guedes, R.M.; Vaz, M.A.P.; “Fiber reinforced polymers for highly stable
structures"” Proc. of the 3rd International Conference on Mechanics & Materials in
Design, 29-31 May, S. A. Meguid, ed., Orlando, pp. 97-98, 2000;
75. Martins, T.L., Monteiro, J.; Melo, F.Q.; Vaz, M.A.P.,”Characterization of directions
of materials orthotropy in carbon-epoxi plates using modal analysis”, Proc. of the
3rd International Conference on Mechanics & Materials in Design, 29-31 May, S.
A. Meguid, ed., Orlando, pp. 1207-208, 2000;
76. Amaro, J.S.; Cirne, J.M.; Rilo, N.F.; Vaz,M.A.P.; “An analytical and experimental
investigation for the evaluation of demage in composite laminate plates”, Proc. of
the 3rd International Conference on Mechanics & Materials in Design, 29-31 May,
S. A. Meguid, ed., Orlando, pp. 237-238, 2000;
77. Rilo, N.F.; Vaz, M.A.P.; Peixinho, N.; Cirne, J.M.; Leal, R.A.; “Test method for in
plane shear modulus determination of composite laminates using vibration of
cantilevered plates and ESPI”; Proc. of the 3rd International Conference on
Mechanics & Materials in Design, 29-31 May, S. A. Meguid, ed., Orlando, pp. 262263, 2000;
78. J.A. Chousal, J.F. SilvaGomes, “Measuring Large Displacements by Image
Processing Correlation”, M2D, 3rd International Conference on Mechanics &
Materials in Design, Orlando 2000;
79. António J. M. Ferreira, Exemple Reussi de Partenariat Europeen: ROSEC,
AEROSOLUTIONS, Bordeuax, 27-29 Junho 2000;
80. P. Davies, B. Bigourdan, P. Chauchot, D. Choquesuse, A.J.M. Ferreira, J-P
Karjalainen, M. Hildebrand, M. Mustakangas, R. Gaarder, F. carli, I. Van Straalen,
J. P. Stargent, R. D. Adams, J. Broughton, A. Beevers, Predicting the behaviour of a
wide sandwich beam under pressure loading, Fifth International Conference on
Sandwich Construction, Zurich, 5-7 September, 2000;
81. A.J.M. Ferreira, J.T. Barbosa, Unstable behaviour of thin sandwich shells
throughout a Marguerre formulation, Fifth International Conference on Sandwich
Construction, Zurich, 5-7 September, 2000;
82. M. Teresa Vasconcelos, Pedro V. Vasconcelos, F. Jorge Lino, Rui J. L. Neto,
Acácio V. Pereira e Elisabete C. Silva, “Interacção Entre Deseño, Industria y
Tecnologia de Punta. Despertar de Sinergias en la Estrategia Educativa del Diseño
del Produto”, Sexto Encuntro de Diseño, Palacio de las Convenciones, Havana,
Cuba, -10 Junho 2000.
295
83. Luís A. Ferreira, Experimental Analysis of Fatigue Failures (Spalling) in Grease
Lubricated Contacts, Proceedings of the 28th Leeds-Lyon Symposium, Elsevier ,
2001;
84. R. Ribeiro, S. da Mota Silva, J. Dias Rodrigues, M. Vaz, P. Reis, Engineering
studies on a CFRP structure for a high energy physics experiment, ICCM-13, 13th
International Conference on Composite Materials, Beijing, June 25-29, 2001;
85. S. da Mota Silva, R. Ribeiro, J. Dias Rodrigues, M. Vaz, Shape Control of
Structures with PZT Actuators Using Genetic Algorithms, ICCM-13, 13th
International Conference on Composite Materials, Beijing, June 25-29, 2001;
86. A. Duarte, J. Seabra e H. Santos, Influence of an ADI specific heat treatments upon
its behaviour to the contact fatigue, Proceedings of 1st International Conference on
Materials, Faculdade de Ciências e Tecnologia da Universidade de Coimbra,
Coimbra, Portugal, 9 a 11 de Abril, 2001;
87. L.A. Ferreira e J. Claro, Experimental analysis of fatigue failures in grease
lubricated contacts, Proceedings of 1st International Conference on Materials,
Faculdade de Ciências e Tecnologia da Universidade de Coimbra, Coimbra,
Portugal, 9 a 11 de Abril, 2001;
88. L.A Ferreira, Grease lubrication mechanisms-Fatigue failures of grease lubricated
contacts, 2nd AIMETA International Tribology Conference, Viena, Austria, 2 a 6
de Setembro 2001;
89. L.A Ferreira, Tribology and maintenance: their importance and interconnection,
2nd World Tribology Conference, Viena, Austria, 2 a 6 de Setembro 2001;
90. J. Paulo Davim, A. Monteiro Baptista, Delamination in drilling carbon fibre
reinforced plastics (CFRP), Eighth Annual Int. Conf. on Composites Engineering –
ICCE/8, Tenerife, Spain August 5-11, 2001;
91. J.F. Silva Gomes, “Laser Interferometry Techniques: Trends and Future Prospects”,
International Conference on New Trends in Design and Manufacture, Aswan/Egypt,
3-7 November 2001;
92. R.Ribeiro, S. da Mota Silva, J.D. Rodrigues, M.A.P. Vaz; “Engineering Studies on
a CFRP structure for a high-energy physics experiment”; 13th Conference on
Composite Materials, China, 2001;
93. L. Devesa, M.A.P. Vaz, J. Sousa Cirne, N. Rilo, R. Leal; “Detection of Impact
Defects in Laminated Composites by Holographic Interferometry”; 1st International
Materials Symposium , Coimbra, 2001;
94. F. Ferreira, M.A.P. Vaz; J. S. Cirne, F. Q. Melo; “High Strain-Rate Tests with Split
Hopkinson Bar-SHPB”; 1st International Materials Symposium , Coimbra, 2001;
[86]-R.Ribeiro, S. da Mota Silva, J.D. Rodrigues, M.A.P. Vaz; “Engineering
Studies on a CFRP structure for a high-energy physics experiment”; 13th
Conference on Composite Materials, Chine, 2001;
95. J.M. Monteiro, M.A.P. Vaz; F.M. Santos; “Use of Pulsed Interferometric
Techniques for on site Non-destructive Inspection of Composite Materials”; III
296
International Conference on Composite Materials in Architecture, Construction and
Civil Engineering, FEUP, CCC 2001;
96. F. Ferreira, M.A.P. Vaz; J. S. Cirne, F. Q. Melo; “Dynamic Characterisation of
Composites Materials at High Strain-Rate”; ”; III International Conference on
Composite Materials in Architecture, Construction and Civil Engineering, FEUP,
CCC 2001;
97. J.A.Simões, J.Monteiro, M.A.Vaz, M.Taylor; ”Numerical and experimental
investigation on the bone-implant interface”, Int. Conf. BioMechanica IV, Davos,
Suiça, 2001;
98. J.A.Simões, J.Monteiro, M.A.Vaz, M.Taylor; ”Femoral displacement patterns
induced by different prosthesis fixation methods: a holographic study”, Int. Conf.
BioMechanica IV, Davos, Suiça, 2001;
99. S. da Mota Silva; R. Ribeiro; J. Dias Rodrigues; M. A. Vaz; “Shape Control of
Structures with PZT Actuators Using Genetic Algorithms”; !3th International
Conference on Composite Materials; Jun 25 – 29; Beijin; 2001;
100. C M M P Novo, O Frazão, A N V Costa, A. F Vieira, N A C M Correia, A T
Marques, F M Araújo, I Dias, “Flow front monitoring in RTM process using fiber
Bragg grating sensors”, 22nd International SAMPE Europe Conference, SAMPE,
Paris, France, 27-29 March 2001, pp. 149-158;
101. J L S Esteves, A T Marques, “The rehabilitation and reinforcement of a concrete
bridge with a CFRP composite systems”, 22nd International SAMPE Europe
Conference, SAMPE, Paris, France, 27-29/3/2001, pp. 405-412;
102. N Crainic, A T Marques, “Nano - composites: a state of the art review”,
MATERIAIS’ 2001 -1st International Materials Symposium, 10º Encontro da
Sociedade Portuguesa de Materiais (CD-ROM), Coimbra, Portugal, 9-11/4/2001;
103. S T Pinho, C M M P Novo, A N V Costa, A F Vieira, N A C M Correia, A T
Marques, “Permeability and compressibility tests of preforms”, MATERIAIS’ 2001
- 1st International Materials Symposium, 10º Encontro da Sociedade Portuguesa de
Materiais (CD-ROM), Coimbra, Portugal, 9-11/4/2001;
104. N Crainic, J F M G Silva, J P L G Nunes, P J P Novo, P A Q S Vieira, A T
Marques, “The influence of processing parameters in the production of glass
reinforced thermoplastic matrix towpregs”, MATERIAIS’ 2001 - 1st International
Materials Symposium, 10º Encontro da Sociedade Portuguesa de Materiais (CDROM), Coimbra, Portugal, 9-11/4/2001;
105. M C S Ribeiro, C M L Tavares, A J M Ferreira, A T Marques, “Static flexural
performance of GFRP - polymer concrete hybrid beams”, MATERIAIS’ 2001 - 1st
International Materials Symposium, 10º Encontro da Sociedade Portuguesa de
Materiais (CD-ROM), Coimbra, Portugal, 9-11/4/2001;
106. E Almeida, J L Esteves, “Metallic End Inserts for Pultruded Fiber-Reinforced Plastc
Rod”, Materiais’2001, 1st Internacional Materials Symposium, Coimbra, 9-11 April
2001;
297
107. C G. Dávila, P P. Camanho, M F. de Moura, "Mixed-Mode Decohesion Elements
for Analysis of Progressive Delamination", 42nd AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics, and Materials Conference and Exhibit, Seattle,
WA, 16-19 April 2001, A01-25226, AIAA-01-1486;
108. J P L G Nunes, J F M G Silva, P J P Novo, A T Marques, A S D Pouzada,
“Production of structures from thermoplastic composite towpregs”, ANTEC 2001
(CD-ROM), Dallas, USA, 7-10 May2001;
109. [101]-J P L G Nunes, J F M G Silva, N Crainic, A T Marques, “Technological
developments to produce low - cost thermoplastic reinforced composites by
filament winding”, EUROMAT 2001 (CD-ROM), Rimini, Itália, 10-14/6/2001;
110. J P M Gonçalves, M F S F de Moura, P M S T de Castro, A T Marques, “Modeling
damage propagation in interfaces considering mode I, mode II and mixed moad
loading conditions”, 6th International Conference on Biaxial/Multiaxial Fatigue &
Fracture, ICB/MF&F 6, Lisboa, Portugal, 25-28/6/2001, vol. 2, pp. 613-621;
111. A N V Costa, C M M P Novo, O Frazão, A F Vieira, N A C M Correia, A T
Marques F M Araújo, I Dias, “Cycle time optimisation of RTM process with optical
fibre Bragg sensors”, 13th International Conference on Composite Materials ICCM 13 (CD-ROM), Beijing, China, 25-29 June 2001;
112. P. P. Camanho, M. F. S. F. de Moura "Simulation of Interlaminar Damage Using
Dechoesion Elements", 13 th International Conference on Composite Materials
(ICCM 13), 25-29 June 2001 – Beijing, China", Artigo nº 1214;
113. P Davies, H Loaec, S Reynaud, A J M Ferreira, et al., ‘Failure of bonded
glass/epoxy composite joints: a bench-mark study and correlation with test studies,
6th International Conference on Structural Adhesives in Engineering’, Bristol, UK,
2001;
114. A J M Ferreira, P P Camanho, A A Fernandes, ‘A numerical model for the analysis
of reinforced concrete with polymer-matrix composite re-bars’, International
Congress on Polymers in Concrete, Hawaii, 2001;
115. S T Pinho, A N V Costa, P A Q S Vieira, A T Marques, P Oliveira, R Pereira,
“Design and manufacture of a fin-box made by RTM”, 8th Annual International
Conference on Composites Engineering ICCE 8, Tenerife, Spain, 5-11 August
2001;
116. J P L G Nunes, J F M G Silva, N Crainic, P A Q S Vieira, D Ronsijn, A T Marques,
“Filament wound pipes made with thermoplastic towpregs and coated tapes”, 8th
Annual International Conference on Composites Engineering ICCE 8, Tenerife,
Spain, 5-11 August 2001;
117. C G. Dávila, P P. Camanho, M F. de Moura, "Progressive Damage Analysis of
Skin/Stringer Debonding", Proceedings of the American Society for Composites,
Sixteenth Technical Conference, Blacksburg, Virginia, Virginia Tech., September
9-12, 2001", Artigo nº 165;
118. M R A Castro, A T Marques, P.P. Camanho, “Design and quality control of
structures made with pultruded profiles”, 1st International Conference on
298
Composites for Construction and 3rd International Conference on Composite
Materials for Architectural Applications - ARQUIMACOM 2001, Porto, Portugal,
10-12 October 2001;
119. A T Marques, J P L G Nunes, R Tipple, C Teixeira, M Vasconcelos, “The
assessment of conformity of GRP pipes, pressure vessels and tanks”, 1st
International Conference on Composites for Construction CCC2001 and 3rd
International Conference on Composite Materials for Architectural Applications ARQUIMACOM 2001, Porto, Portugal, 10-12 October 2001;
120. J L S Esteves, A T Marques, “Development of CFRP flat bar for the rehabilitation
and strengthening of buildings and bridges”, 1st International Conference on
Composites for Construction CCC2001 and 3rd International Conference on
Composite Materials for Architectural Applications - ARQUIMACOM 2001, Porto,
Portugal, 10-12 October 2001;
121. O. Frazão, F M Araújo, A F Vieira, N A C M Correia, C M M P Novo, A N V
Costa, A T Marques, “Smart composite for monitoring of structures”, 1st
International Conference on Composites for Construction CCC2001 and 3rd
International Conference on Composite Materials for Architectural Applications ARQUIMACOM 2001, Porto, Portugal, 10-12 October2001;
122. C M L Tavares, M C S Ribeiro, D F Monteiro, P P Camanho, A J M Ferreira,
‘Experimental investigation into He static and fatigue behaviour of polymer
concrete reinforced with GFRP rods’, 1st International Conference on Composites
for Construction CCC2001 and 3rd International Conference on Composite
Materials for Architectural Applications - ARQUIMACOM 2001, Porto, Portugal,
10-12 October 2001;
123. R M Guedes, ‘A Review on Long Term Creep and Rupture of Polymeric
Materials’, 1st International Conference on Composites for Construction CCC2001
and 3rd International Conference on Composite Materials for Architectural
Applications - ARQUIMACOM 2001, Porto, Portugal, 10-12/10/2001, pp. 367372;
124. M C S Ribeiro, C M L Tavares, A J M Ferreira, A T Marques, “Static flexural
performance of GFRP - polymer concrete hybrid beams’, FRP Composites in Civil
Engineering, CICE 2001, Hong-Kong, 2001, pp.1355-1362;
125. R M Guedes, ‘On Creep Rupture Prediction of Polymer and FRP Laminates’, 5th
International Conference on Progress in Durability Analysis of Composite Systems,
DURACOSYS 2001, 6-9 November 2001, Science University of Tokyo, Japan;
126. C. M. L. Tavares, M. C. S. Ribeiro, A. J. M. Ferreira, R. M. Guedes, ‘Creep
behaviour of FRP-reinforced polymer concrete’, 11th International Conference on
Composite Structures, ICCS/11, 19-21 November 2001, Monash University,
Australia;
127. A V Lima, A T Marques, “Static and fatigue evaluation of GFRP composites in 3 –
point bending tests”, DURACOSYS 2001 Durability of Composite Systems,
Tóquio, Japão, 6 – 9 November 2001;
299
128. J J L Morais, A G Magalhães, A T Marques, “On transverse matrix cracking
initiation in composite laminates”, DURACOSYS 2001 Durability of Composite
Systems, Tóquio, Japão, 6 – 9 November 2001;
129. J.F. Silva, J P Nunes, P Vieira, D Ronsijn, A T Marques, “ The use of towpregs for
the production of filament wound pipes”, MATCOMP’01 IV Congreso Nacional de
Materiales Compuestos, Gijón, Espanha, 21 – 23 November 2001;
130. S T Pinho, A Nicolau, P Vieira, A T Marques, P Oliveira, Concept analysis of a finbox made by RTM”, MATCOMP’01 IV Congreso Nacional de Materiales
Compuestos, Gijón, Espanha, 21 – 23 November 2001;
131. A T Marques, A J M Ferreira, R M Guedes, A Vieira, J Reis, “ Prediction of
longterm properties of GRP pipes”, MATCOMP’01 IV Congreso Nacional de
Materiales Compuestos, Gijón, Espanha, 21 – 23 November 2001;
132. J. Barbosa, J.Tavares and A.J. Padilha, Self-Tuned Parallel Processing System for
Heterogeneous Clusters, International Conference on Parallel and Distributed
Processing Techniques and Applications, PDPTA, H. R. Arabnia (Ed.), CSREA
Press, June 2001.
133. Ana Reis, A. D. Santos, J. Ferreira Duarte, A. B. Rocha, Sai-Yi Li, E. Hoferlin, A.
Van Bael, P. Van Houtte, and C. Teodosiu, "F.E. Prediction and Experimental
Validation of a Plasticity Model of Texture and Strain Induced Anisotropy",
Proceedings of the SheMet 2001 – 9th International Conference on Sheet Metal,
Katholieke Universiteit Leuven, Bélgium, 2-3 April 2001.
134. Ana Reis, A. D. Santos, J. Ferreira Duarte, Sai-Yi Li, E. Hoferlin, A. Van Bael, P.
Van Houtte, C. Teodosiu "Finite Element Simulation and Experimental Validation
of a Plasticity Model of Texture and Strain Induced Anisotropy", MATERIAIS
2001, 1st International Materials Symposium, Faculdade de Ciências e Tecnologia,
Coimbra, 9-11 April 2001.
135. F. Jorge Lino, Henry Camboa, Bártolo Paiva and Rui J. Neto, “Direct Conversion
of Rapid Prototyping Models”, MATERIAIS 2001, 1st International Materials
Symposium, Faculdade de Ciências e Tecnologia, Coimbra, 9-11 April 2001.
136. F. Jorge Lino, Alfredo Oliveira, Rui J. Neto and F. Oliveira, “Influence of Defects
Level on Fatigue Life of Ductile Iron Parts”, MATERIAIS 2001, 1st International
Materials Symposium, Faculdade de Ciências e Tecnologia, Coimbra, 9-11 April
2001.
137. Teresa P. Duarte, F. Jorge Lino and Rui J. Neto, “Conversion of Rapid Prototyping
Models into Metallic Tools by Sol-Gel Processes”, MATERIAIS 2001, 1st
International Materials Symposium, Faculdade de Ciências e Tecnologia, Coimbra,
9-11 April 2001.
138. H. Nogueira, D. Abílio and F. Jorge Lino, “Production of Honeycomb Structures
Based on Rapid Prototyping Process Leftovers”, MATERIAIS 2001, 1st
9-11 April 2001.
300
139. F. Jorge Lino, J. Emanuel Fonseca, Ricardo Maia and Teresa P. Duarte, “Coated
Ceramic Components for Aluminium Casting Industry”, MATERIAIS 2001, 1st
9-11 April 2001.
140. Pedro Vasconcelos, F. Jorge Lino, Rui J. Neto, “The Importance of Rapid Tooling
in Product Development”, MATERIAIS 2001, 1st International Materials
Symposium, Faculdade de Ciências e Tecnologia, Coimbra, 9-11 April 2001.
141. M. C. Butuc, A. B. Rocha, J. Ferreira Duarte, F. Barlat, J. J. Gracio, "Forming Limit
Diagram for 6016 Aluminium Alloys Deformed Under Linear and Complex Strain
Paths", MATERIAIS 2001, 1st International Materials Symposium, Faculdade de
Ciências e Tecnologia, Coimbra, 9-11 April 2001.
142. J. Grácio, E. F. Rauch, F. Barlat, A. B. Lopes, J. Ferreira Duarte, “Strain Hardening
Anisotropy of Aluminium Alloys During Complex Loading: Strain Reversal
Effects”, MATERIAIS 2001, 1st International Materials Symposium, Faculdade de
Ciências e Tecnologia, Coimbra, 9-11 April 2001.
143. Ana Reis, A. D. Santos, J. Ferreira Duarte, A. B. Rocha, Sai-Yi Li, E. Hoferlin, A.
Van Bael, P. Van Houtte, and C. Teodosiu, "Experimental Validation of a New
Plasticity Model of Texture and Strain-Induced Anisotropy", Proceedings of the 4th
International ESAFORM Conference on Material Forming, Volume two, pp. 433436, Liège, Bélgium, 23-25 April 2001.
144. F. Jorge Lino, Rui J. Neto, Alfredo Oliveira and Fernando M. F. de Oliveira,
“Influence of Porosity Level on Fatigue Life of Aluminium Pressure DieCastings”,
Proccedings of the “Sixth International Conference on Biaxial/Multiaxial Fatigue &
Fracture”, Instituto Superior Técnico, ICEMS/IDMEC, Volume II, pp. 795-802,
Editor Manuel Freitas, Lisboa, 25-29 June 2001.
145. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Luis Menezes,
Marta, Alain Col, T. Ono, "Em Busca de “Benchmarks” e Dados de Referência para
a Validação e Desenvolvimento da Modelação Numérica de Processos de
Estampagem com Chapas Metálicas" 2º Congresso Luso - Moçambicano de
Engenharia, Maputo, Moçambique, 2-6 Setembro 2001.
146. Ana Reis, Abel D. Santos, J. Ferreira Duarte, A. Barata da Rocha, “Aplicação da
Modelação Numérica por Elementos Finitos a Processos de Conformação Plástica
de Forjamento e Embutidura", 2º Congresso Luso - Moçambicano de Engenharia,
Maputo, Moçambique, 2-6 Setembro 2001.
147. H. B. Campos, J. J. Gracio, F. Teixeira Dias, J. E. Rocha and J. Ferreira Duarte,
“Influence of Strain Rate on the Plastic Behavior of 304 Stainless Steel Deformed
in Uniaxial Tension”, 3ª Conferência Nacional de Conformação de Chapa,
Gramado, Brasil, Outubro, pg. 37 2001.
148. Ferreira, F. J.; M. A. P. Vaz,.; Simões, J. A. “Preliminary study on the
characterisation of bovine cortical bone at high strain rate using the Hopkinson
pressure bar”, Proc of 13th Conference of the European Society of Biomechanics, 4
de Setembro de 2002, Warzaw, Polónia.
301
149. Ferreira, F. J., M. A. P. Vaz, , Simões, J. A., “The role specimen geometry for
accurate characterisation of bone properties using the Split-Hopkinson Pressure
Bar”, Proc. Of Advanced School and Workshop on Bone Mechanics –
Mathematical and Mechanical Models for Analysis and Synthesis, June 24-28 de
2002, Instituto Superior Técnico, Portugal.
150. M. A. P. Vaz; Paulo J. Tavares, “Three-Dimensional Profilometer For Shape
Extraction In Rapid Prototyping”; Congresso, Moldes Portugal, RPD2002, Marinha
Grande, 6 - 11 October 2002.
151. A. J. M. Ferreira, New polymer concretes for infrastructure applications, 12th
International Scientific and Technological Conference on Transport and Building
Infrastructure in Crisis Situations, Warszawa-Rynia, Poland, 2002.
152. A J M Ferreira, A T Marques, C M L Tavares, M C S Ribeiro, “Polymer concrete
under severe conditions”, ORGACEC’ 02 – Les Matériaux Organiques: un Avenir
pour le Génie Civil? – des questions pour l’environnement, Poitiers, France, 1315/03/2002.
153. A T Marques, M R A Castro, P P Camnaho, A N Costa, “Design, quality control
and quality assurance of structures made with pultruded profiles” (apresentação
convidada), 6th World pultrusion Conference, Prague, Czhec Republic, 4-5/4/2002.
154. M. Sousa, C. Novo, A. N. Costa, A. Vieira, A. Torres Marques, O. Frazão, I. Dias,
“Monitoring RTM Process and the Structure in Service Using Fibre Bragg Grating
Sensors”, SAMPE, Paris, França, /04/2002.
155. J. L. Esteves, A. T. Marques, “Guidelines for a quality control procedure to ensure
sound strengthening and rehabilitation of concrete structures using FRP”, 8 th EuroJananese Symposium, Tokyo 16-17/04/2002.
156. J. P. Nunes, J. F. Silva, P. Vieira, A. T. Marques, ‘Advances on Filament Winding
Technology to Produce Composites from Thermoplastic Towpregs and Coated
Tapes’, ANTEC’02, S. Francisco/USA 5-9/05/2002.
157. Pereira, C., Carvalho, L. M. H., Costa, C. A. V., “Simulation of the effects of a
cooling zone in the internal conditions of MDF continuous hot-pressing process”,
Proceedings of the International Symposium on Wood based Materials: Wood
Composites and Chemistry (Final Workshop of COST E13), Viena, 117-123, 2002.
158. A.B. Morais, M. F. S. F. de Moura, A. T. Marques, P. M. S. T. de Castro “Fractura
Interlaminar de Compósitos Carbono/Epóxido”, V Congresso de Métodos
Numéricos en Ingeniería, 9 páginas, Madrid, Espanha, 3-6/6/2002.
159. C M L Tavares, M C S Ribeiro, A J M Ferreira, A T Marques, “Flexural analysis of
polymer concrete beams reinforced with steel and pultruded rebars” 10th European
Conference on Composite Materials ECCM 10, Brugge, Belgium, 3-7/6/2002.
160. R de Oliveira, A T Marques, J M Berthelot, “Monitoring of transverse matrix
cracking in glass-fibre/polyester cross-ply laminates using acoustic emission”, 10th
European Conference on Composite Materials ECCM 10, Brugge, Belgium, 37/6/2002.
302
161. A Nicolau, J L Esteves, A T Marques, M Vasconcelos, J P Nunes, A V da Fonseca,
“The compilation of field measurements on buried pipes and comparison with
estimated design results”, 10th European Conference on Composite Materials
ECCM 10, Brugge, Belgium, 3-7/6/2002.
162. J P Nunes, J F Silva, A T Marques, N Crainic, M J Oliveira, “The influence of
Processing Temperature in the Production of Glass Reinforced Thermoplastic
Matrix Towpregs”, 10th European Conference on Composite Materials ECCM 10,
Brugge, Belgium, 3-7/6/2002.
163. P Vieira, N Loureiro, J L Esteves, A T Marques, “Strengthening and reinforcement
of concrete beams by the application of CFRP using the filament winding method”,
10th European Conference on Composite Materials ECCM 10, Brugge, Belgium, 37/6/2002.
164. L. Silva, T. Coupez, ‘A unified model of the filling and post-filling stages in3D
injection moulding simulation’, 18th Conf. Polymer Processing Society PPS18,
Guimarães, Portugal, 18-20/06/2002.
165. J. P. Nunes, J. F. Silva, P. Vieira, A. T. Marques, Implementation of an Industrial
Process to Produce Filament Wound Composites from Thermoplastic Towpregs and
Coated Tapes, 18th Conf. Polymer Processing Society PPS 18, Guimarães/Portugal
16-20/06/2002.
166. A Vieira, J Reis, A T Marques, J A Simões, “The influence of head-stem offset and
cemented stem stiffness on strain distribution: study with sheep femora”, 13th
Conference of the European Society of Biomechanics, R. Bedzinski, C. Pezowicz e
K. Scigala (Eds.), Wroclaw, Polónia, 1-4/9/2002.
167. R. de Oliveira, A.T. Marques, J.-M. Berthelot, “Transverse matrix cracking
monitoring in glass-fibre/polyester cross-ply laminates by acoustic emission”, 25th
European Conference on Acoustic Emission Testing, Prague, Republica Checa, 1113/09/2002.
168. R. de Oliveira, J. M. L. Reis, A. J. M. Ferreira, A. T. Marques, ‘An acoustic
emission assessment of fracture energy of polymer concrete’, International
Conference on Polymer Concretes, Mortars and Asphalts, Porto, 2002.
169. M.C.S. Ribeiro, A.J.M. Ferreira, A.T. Marques, ‘Assessment of thermal
degradation on polymer mortars’, Int. Conference on Polymer Concretes, Mortars
and Asphalts -ICPCMA, pp.243-255, Porto, Portugal, October 2002.
170. J. M. L. Reis, A. J. M. Ferreira, Freeze-thaw resistance of reinforced epoxy polymer
concrete, International Conference on Polymer Concretes, Mortars and Asphalts,
pp.101-112, Porto, 2002.
171. C. M. C. Roque, P. A. L. S. Martins A. J. M. Ferreira, Thermal fatigue effects on
epoxy concrete, International Conference on Polymer Concretes, Mortars and
Asphalts, pp.175-190, Porto, 2002.
172. J. M. Ferreira, A. A. Fernandes, F. Meyer, J. T. San José, R. Letsch, B. Neumann,
M. Izurieta, P. Sheard, A. Carneiro, G. di Mauro, On an European project on
303
polymer concrete and non-metallic reinforcements, International Conference on
Polymer Concretes, Mortars and Asphalts, pp.191-222, Porto, 2002.
173. M. L. Tavares, R. J. C. M. Guedes, A. J. M. Ferreira, Experimental investigation of
creep behaviour of epoxy concrete with different reinforcements, International
Conference on Polymer Concretes, Mortars and Asphalts, pp.275-282, Porto, 2002.
174. M.C.S. Ribeiro, A.J.M. Ferreira, A.T. Marques, ‘Analysis and experiments on
GFRP-Polymer Concrete Hybrid Beams’, Int. Conference on Polymer Concretes,
Mortars and Asphalts -ICPCMA, pp.257-268, Porto, Portugal, October 2002.
175. M.C.S. Ribeiro, A.J.M. Ferreira, A.T. Marques, ‘Durability assessment of
unsaturated polyester and epoxy polymer mortars’, ARQUIMACOM’02, S. Paulo,
Brasil, 18.21/11/2002.
176. A T. Marques, J. J. Duque Carreira, M. Botelho,’Desenvolvimento sustentável: um
desafio para os materiais compósitos’, conferência convidada, ARQUIMACOM
2002, S. Paulo, Brasil, 18–21/11/2002.
177. N. Costa, M. Sousa, C. Novo, A. Vieira, A. Torres Marques, O. Frazão, I. Dias,
“Monitoring RTM Process and the Structure in Service Using Fibre Bragg Grating
Sensors”, 23rd International SAMPE Europe Conference, pp. 149-159, Paris Expo,
Portes de Versailles, Paris, France, April 9-11, 2002.
178. N. C. Correia, F. Robitaille, A. C. Long, C. D. Rudd, P Šimáček and S.G. Advani: "
Use of resintransfer molding simulation to predict flow, saturation and compaction
in the VARTM process”,IMECE 2002, American Society of Mechanical Engineers,
New Orleans, November 17-22, 2002.
179. Ragondet, N. C. Correia, F. Robitaille, A. C. Long and C. D. Rudd,
“Experimentalinvestigation and modelling of the vacuum infusion process” 10th
European Conference on Composite Materials . Brugges, Belgium, May 2002.
180. N. C. Correia, A. Ragondet, F. Robitaille, A. C. Long and C. D. Rudd, March 2002
"Modelling thevacuum infusion of composite materials”, 9th Int Conf Fibre
Reinforced Composites, Newcastle upon Tyne, UK. March 2002.
181. A. Campos, J. Castro , A. Sottomayor e J. Seabra., Prediction Of The Friction
Coefficient Between Gear Teeth Using A Mixed Film Lubrication Model.,
Proceedings of the 29th, "Leeds-Lyon Symposium" on Tribology, Leeds, UK, 3 a 6
de Setembro de 2002.
182. A. Monteiro, V. Teixeira, F. Guimarães, F. J. G. Silva, A. P. M. Baptista, E. Pereira,
Influence Of Deposition Conditions On The Properties Of Tungsten Sputtered
Coatings, International Conference on Metallurgical Coatings and Thin Films,
ICMCTF, San, Diego, California, USA, April, 2002.
183. A. Monteiro, V. Teixeira, F. Guimarães, F. J. G. Silva, A. P. M. Baptista, E. Pereira,
Characterization Of Cvd Interlayers Used To Growth Cvd Diamond Coatings,
International Conference on Metallurgical Coatings and Thin Films, ICMCTF, San,
Diego, California, USA, April, 2002.
304
184. R. Moreira, J. D. Rodrigues, The Modelisation Of Constrained Damping Layer
Treatments Using The Finite Element Method: Spatial Model And Viscoelastic
Behaviour, Proceedings of the International Conference on Structural Dynamics
Modelling, Test, Analysis, Correlation and Validation, Madeira, Portugal, 3-5 June
2002.
185. Francisco Nunes, A. Monteiro Baptista, José Costa, Comparative Study Of HighSpeed Milling (Hsm), Electrical Discharge Machining (Edm) And Conventional
Milling For Mould And Electrode Manufacturing RPD 2002 – Advanced Solutions
and Development, CENTIMFE, Marinha Grande, 7-9 Outubro 2002
186. M. Teresa Vasconcelos, Pedro V. Vasconcelos and F. Jorge Lino, “The
Contribution of the New Technologies to the 21st-Century Design”, Reunión
Científica Internacional de Historiadores y Estudiosos del diseño, Istambul, Turkey,
9-12 July 2002.
187. F. Jorge Lino, T. M. Duarte and R. S. Maia, “Coated Flame Sprayed Ceramic
Components”, CIMTEC 2002, 10th International Conferences on Modern Materials
& Technologies, 10th International Ceramics Congress & 3rd Forum on New
Materials – Part C, 960 pages, Florence, Italy, 14-19 July 2002.
188. T. P. Duarte, F. Jorge Lino, A. Barbedo and J. M. Ferreira, “Metallic Tools
Obtained from Ceramic Moulding Using a Sol-Gel Process”, CIMTEC 2002, 10th
International Conferences on Modern Materials & Technologies, 10th International
Ceramics Congress & 3rd Forum on New Materials – Part B, 660 pages, Florence,
Italy, 14-19 July 2002.
189. P. Jorge Silva, A. Barbedo Magalhães, Rui J. Neto, and F. Jorge Lino, “Indirect
Rapid Tooling Using Ceramic Moulding and Investment Casting Processes”, RPD –
Rapid Product Development – “Advanced Solutions and Development”, Semana de
Moldes 2002, Centimfe, Marinha Grande, 7-11 Outubro 2002.
190. Teresa P. Duarte, F. Jorge Lino, A. Barbedo, J. M. Ferreira and Rui Neto,
“Production of Metallic Tools by Ceramic Moulding – A Rapid Tooling Process”,
RPD – Rapid Product Development – “Advanced Solutions and Development”,
Semana de Moldes 2002, Centimfe, Marinha Grande, 7-11 Outubro 2002.
191. P. V. Vasconcelos, F. Jorge Lino, R. J. Neto and Maria Teresa Vasconcelos,
“Design and Rapid Product Evolution”, RPD – Rapid Product Development –
“Advanced Solutions and Development”, Semana de Moldes 2002, Centimfe,
Marinha Grande, 7-11 Outubro 2002.
192. P. V. Vasconcelos, F. Jorge Lino, and R. J. Neto, “The Effect of Aluminium
Granulometry on the Behaviour of Filled Epoxy Resins for Rapid Tooling”, RPD –
Rapid Product Development – “Advanced Solutions and Development”, Semana de
Moldes 2002, Centimfe, Marinha Grande, 7-11 Outubro 2002.
193. F. Jorge Lino, Rui J. Neto, Ricardo Paiva and Bártolo Paiva, “Metallic Prototypes
for the Pressure Die Casting Industry”, RPD – Rapid Product Development –
“Advanced Solutions and Development”, Semana de Moldes 2002, Centimfe,
Marinha Grande, 7-11 Outubro 2002.
305
194. Pedro V. Vasconcelos, F. Jorge Lino and Rui J. Neto, “Optimization of Resin
Tooling Processing – Aluminium Filled and Fiber Reinforced Epoxies”, CIMTEC
2002, 10th International Conferences on Modern Materials & Technologies, 10th
International Ceramics Congress & 3rd Forum on New Materials, Florence, Italy,
14-19 July (2002), Cimtec Proceedings pf the 3rd Forum on New Materials – Part V,
340 pages 2002.
195. M.C. Butuc, A. Barata da Rocha, J. J. Gracio, and J. Ferreira Duarte “Study on
Forming Limit Diagrams Prediction using a Phenomenological and a Physical
Approach of Plasticity Theory”, 6th European Mechanics of Materials Conference
(EMMC6), 2002.
196. M.C. Butuc, A. Barata da Rocha, J.J. Gracio, J. Ferreira Duarte, P. Jurco, D.S.
Comsa, Dorel Banabic, “Influence of Constitutive Equations and Strain-Path
Change on the Forming Limit Diagram for 5182 Aluminum Alloy“, 5th
International ESAFORM Conference on Material Forming, Cracóvia, Polónia, 1417 de Abril 2002.
197. M. C. Butuc, A. Barata da Rocha, J. J. Grácio, J. Ferreira Duarte, “A More General
Model for Forming Limit Diagrams Prediction”, 9th International Conference on
Metal Forming 2002, University of Birmingham, 9-11 Setembro de 2002.
198. M.C. Butuc, D. Banabic, A. Barata da Rocha, J. J. Grácio, J. Ferreira Duarte, P.
Jurco, D.S. Comsa, “The Performance of YLD96 and BBC2000 Yield Functions in
Forming Limit Prediction”, 9th International Conference on Metal Forming 2002,
University of Birmingham, 9-11 Setembro de 2002.
199. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Luis F. Menezes,
Marta C. Oliveira, Alain Col , T.Ono, “Towards Standard Benchmarks and
Reference Data for Validation and Improvement of Numerical Simulation in Sheet
Metal Forming”, 9th International Conference on Metal Forming 2002, University
of Birmingham, 9-11 Setembro 2002.
200. Ana Reis, Abel D. Santos, J. Ferreira Duarte, A. Barata da Rocha, Rui Neto, “FEM,
LOM and Investiment Casting - A Contribution to Rapid Protopyping of Forged
Parts”, RPD - Advanced Solutions and Development”, CENTIMF, Marinha
Grande, 7-11 de Outubro 2002.
201. Piloto, P.; Mesquita, L. M. R.; Vila Real, P.; M. A. P. Vaz,;”Análise experimental
da encurvadura lateral torsional de vigas com reforços transversais”; 3º Congresso
Luso-Moçambicano de Engenharia, Maputo 19-21 Agosto, 2003.
202. Simões, J. A., Monteiro, J., M. A. P. Vaz, , “Validation of a graded controlled
stiffness femoral stem concept”, International Congress on Computational
Bioengineering, M. Doblaré, M. Cerrolaza and H. Rodrigues (Eds.), 24 a 26 de
Setembro 2003, Zaragoza, pp. 141-146, 2003,
203. Vieira, A., M. A. P. Vaz, Guedes, R. M., Simões, J. A., 2003, ”A test method to
discriminate mechanical stability of non-cemented femoral stems”, 7th Portuguese
Conference on Biomedical Engineering, Bioeng’2003, 26-27 June, Lisboa (in CDROM)
306
204. Simões, J. A., M. A. P. Vaz, , “The application of holography laser for the
assessment of bone-implant fixation conditions”, 5th International Conference on
Simulations in Biomedicine, Ljubljana, Slovenia, 2-4 Abril 2003, Simulations in
Biomedicine V, Z. M. Arnež, C. A. Brebbia, F. Solina e V. Stankovski (eds.),
Advances in Computational Bioengineering, WIT Press, pp. 305-313, 2003,
205. Piloto, P. A. G: ; Mesquita, L. ; M. A. P. Vaz; Vila Real, P. ; “ A influência das
imperfeições geométricas na resistência de vigas à encurvadura lateral”; IV
Congresso de Construção Metálica e Mista, 4 e 5 de Dezembro, Lisboa, 2003.
206. Amaro, A. M; Cirne, J. M. O. S.; Rilo, N. F.; M. A. P. Vaz,; Monteiro, J. M.;
“Análise de Defeitos em Compósitos Laminados com Técnicas de Interferometria”;
VI Congresso Ibero-Americano de Engenharia Mecânica, 15 a 18 de Outubro de
2003, Coimbra, Portugal.
207. H. M. R. Lopes, R. M. Guedes, M. A. P. Vaz, J. F. D. Rodrigues; “Experimental
response and numerical simulation of plates submitted to small mass impact”, The
Ninth International Conference on Civil and Structural Engineering Computing,
Egmond aan Zee, The Netherlands 2-4 September 2003.
208. Rui M. Guedes, Pedro H. Magalhães, Fernando J. Ferreira, M. A. Vaz, “Failure in
CFRP Laminates at High Strain Rate Compression”, SAMPE EUROPE
International Conference, 1-3 de April de 2003, La Défense, Paris.
209. Luísa F. Bastos, João Manuel R. S. Tavares; “Optimization in Modal Matching for
Correspondence of Objects Nodal Points”; Artigo para a BioEng’2003 - 7th
Portuguese Conference on Biomedical Engineering; Universidade de Lisboa, Junho
de 2003.
210. Raquel Ramos Pinho, João Manuel R. S. Tavares; “Resolution of the Dynamic
Equilibrium Equation to Simulate Objects’ Movement/Deformation”, Artigo para a
BioEng’2003 - 7th Portuguese Conference on Biomedical Engineering,
Universidade de Lisboa, Junho de 2003.
211. Ricardo Ferreira, João Manuel R. S. Tavares, Francisco Freitas, “Comando de um
Servomecanismo por Linguagem Gestual Usando Visão Computacional”, Artigo
para o VI Congresso Ibero-Americano de Engenharia Mecânica – Sessão Temática
em Robótica e Automação Industrial Universidade de Coimbra, Outubro de 2003.
212. Luísa F. Bastos, João Manuel R. S. Tavares, “Método dos Elementos Finitos,
Análise Modal e Técnicas de Optimização para a Determinação de
Correspondências entre Objectos”, Artigo para o VI Congresso Ibero-Americano de
Engenharia Mecânica, Universidade de Coimbra, Outubro de 2003.
213. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Determinação da Energia de
Deformação entre Imagens de Objectos Utilizando a Resolução da Equação de
Lagrange”, Artigo para o VI Congresso Ibero-Americano de Engenharia Mecânica,
Universidade de Coimbra, Outubro de 2003. ~
214. Rui M. Guedes, Pedro H. Magalhães, Fernando J. Ferreira, Mário A. Vaz, “Failure
in CFRP LAMINATES at HIGH STRAIN RATE COMPRESSION”, Proceedings
of the 24th International SAMPE Europe Conference of the Society for the
307
Advancement of Materials and Process Engineering “Advanced Composites: The
Balance between Performance and Cost”, K. Drechsler (Editor), Paris Expo, Porte
de Versailles, Paris, 1-3/04/2003;pp. 381-389.
215. M. Sousa, C. Novo, A. N. Costa, A. Torres Marques, O. Frazão, I. Dias, “Health
Monitoring of a Boat Structure with a Sensor Bragg Network”, II International
Materials Symposium, Materials 2003, April 14-16, Faculdade de Ciências e
Tecnologia, Universidade Novo de Lisboa, Campus da Caparica, P8.06, pp. 305.
216. M. Sousa, C. Novo, A. N. Costa, A. Torres Marques, “Use Composite Materials to
Renovate a Steel Water Pipe”, II International Materials Symposium, Materials
2003, April 14-16, Faculdade de Ciências e Tecnologia, Universidade Novo de
Lisboa, Campus da Caparica, W08.17, pp. 295.
217. B. Rodrigues, P. Vasconcelos, P. Nóvoa, A. T. Marques, “Hollow thermoplastic
microspheres as impact strength additives for unsaturated polyester resins and
composites”, MATERIAIS’ 2003 –2nd International Materials Symposium, 11º
Encontro da Sociedade Portuguesa de Materiais, Costa da Caparica, Portugal, 1416/4/2003, (CD-ROM)
218. P. Vieira, S. T. Pinho, A. T. Marques, A. Vieira, P. Oliveira, “Manufacture of a finbox made by RTM”, MATERIAIS’ 2003 –2nd International Materials Symposium,
11º Encontro da Sociedade Portuguesa de Materiais, Costa da Caparica, Portugal,
14-16/4/2003, (CD-ROM)
219. L. Silva, R. Valette, T. Coupez, ‘Viscoelastic compressible modeling of 3D filling
and post-filling of complex industrial parts; ESAFORM 6, Salerno, Abril 2003
220. P. Vieira, C. Romão, A.T. Marques, J.L. Esteves, “Mechanical Characterisation of
Natural Reinforced Plastics”, MATERIAIS 2003, II International Materials
Symposium, Faculdade de Ciências e Tecnologia, Campos da Caparica, Portugal,
April, 14-16, 2003.
221. Paulo R.O. Nóvoa, Maria C.S. Ribeiro, António J.M. Ferreira, ‘Mechanical
behaviour of cork-modified polymer concrete’, II International Materials
Symposium – Materials’2003, Caparica, Portugal, 11-14 April 2003, pg. 280
222. I. M. A. Duarte, A. J. M. Ferreira, J. Banhart, M. J. G. Santos, A model for
nucleation and growth mechanisms in metal foam processes, Materiais 2003, II
International Materials Symposium., Universidade Nova de Lisboa, 2003
223. A. Vieira, J. Reis, A. T. Marques, A. J. M. Ferreira, R. M. Guedes, Comportamento
mecânico a longo prazo de tubagens em plástico reforçado com fibra de vidro,
Materiais 2003, II International Materials Symposium., Universidade Nova de
Lisboa, 2003
224. J. A. Rodrigues, A. T. Marques, “The influence of flame retardant agents in the fire
performance of SMC”, MATERIAIS’ 2003 –2nd International Materials
Symposium, 11º Encontro da Sociedade Portuguesa de Materiais, Costa da
Caparica, Portugal, 14-16/4/2003, (CD-ROM)
225. C.Romão, P. Vieira, F. Peito, A. T. Marques, J. L. Esteves, “Single Filament
Mechanical Characterisation of Hemp Fibres for Reinforcing of Composite
308
Materials”, The Seventh International Conference on Frontiers of Polymers and
Advanced Materials – ICFPAM VII, Oradea, Romania, 10-15/6/2003
226. A. Vieira, M. Vaz, R. M., Guedes, J. A. Simões, ”A test method to discriminate
mechanical stability of non-cemented femoral stems”, 7th Portuguese Conference on
Biomedical Engineering, Bioeng’2003, Lisboa, 26-27/06/2003, (in CD-ROM)
227. A. J. M. Ferreira, “Uma formulação de 3a ordem de viga laminada compósita com
interpolação por multiquádricas”, MATCOMP 03 - V Congresso da Associação
Espanhola de Materiais Compósitos 2003, Zaragoza, Espanha, 1-3/07/2003
228. J. Costa, A. Turón, P.P. Camanho, N. Blanco, N. Gascons, Simulación con
elementos de descohesión de la delaminación en modo mixto variable mediante un
acoplamiento energético, MATCOMP 03 - V Congreso Nacional de Materiales
Compuestos, Zaragoza, Espanha, 1-3/07/2003.
229. N. Crainic, A. F. Vieira, P. A. Vieira, M. Sousa, P. J. Nóvoa, A. T. Marques, Resin
Transfer Moulding of Composites with Enhanced Properties using Resin Modified
with Microscopic Cork Powder, ICFPAM VII, Bucareste, Romania, 10-15/6/2003.
230. L. M. P. Durão, A. T. Marques, A. G. Magalhães, A. M. Baptista, “Mecanizado de
Materiales Compuestos de Matriz de PRFV”, ”, MATCOMP 03 - V Congresso da
Associação Espanhola de Materiais Compósitos 2003, Zaragoza, 1-3/07/2003
231. M.C.S. Ribeiro, A.J.M. Ferreira, A.T. Marques, ‘Flexural behaviour of GFRPPolymer Concrete Hybrid Structural Systems’, 6th Int. Symposium on FibreReinforced Polymer Reinforcemennt for Concrete Structures-FRPRCS - 6,
Singapore, 8-11/07/2003
232. L. Silva, R. Valette, T. Coupez, ‘Viscoelasticity and compressibility in 3D injection
moulding simulation’, PPS19, Melbourne, Julho 2003
233. P. Vieira, J.L. Esteves, A.T. Marques, “Optimizing the Strengthening and
Reinforcement of Concrete Beams by the use of CFRP Filament Winding”, 14th
International Conference on Composite Materials ICCM14, San Diego, USA 1418/7/2003
234. J. P. Nunes, F. W. J. Van Hattum, C. A. Bernardo, J. F.Silva, P. Vieira, A. T.
Marques, “Low-Cost Production and Processing of LFTs”, Procedings of 14th Int.
Conf. on Composite Materials- ICCM 14, San Diego, USA: 14-18 Julho, 2003
235. P.P. Camanho, H.B. Martins, C.M.L. Tavares, R. de Oliveira, A.T. Marques,
“Increasing the efficiency of CFRP bolted joints using bonded inserts”, 14th
International Conference on Composite Materials, San Diego, 2003.
236. A. J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, A meshless formulation of
the multiquadric radial basis function method for the analysis of laminated
composite plates using higher-order theories, 10th International Conference on
Composite Engineering, New Orleans, USA, 07/2003
237. J. P. Nunes, F. W. J. Van Hattum, C. A. Bernardo, J. F. Silva, A. T. Marques
Produção e Processamento a Baixo Custo de Compósitos Reforçados com Fibra
309
Longas (LFTs), Actas do Congresso Luso-Moçambicano de EngenhariaCLME’03, Maputo, Moçambique: 19-21 Agosto, 2003.
238. J.B. Almeida, M. T. Restivo, A. T. Marques, ‘Utilização do Método do Furo para
Determinação de Tensões Residuais em Materiais Poliméricos, 3º Congresso LusoMoçambicano de Engenharia, Maputo, Moçambique, 19-21/08/2003
239. N. C. Correia, F. Robitaille, A. C. Long and C. D. Rudd “Analytical And Numerical
Studies IntoThe Vacuum Infusion Process: In-Plane Flow In Compressible Porous
Media”. 14th International Conference on Composite Materials - ICCM 14. July
14th to 18th 2003
240. A.C. Long, N.C. Correia, A. Ragondet, F. Robitaille, C.D. Rudd “Analytical And
Numerical Modelling Of Vacuum Infusion” SAMPE Conference, Paris 2003
241. A. N. Costa, C. Novo, M. Sousa, A. Torres Marques, O. Frazão, I. Dias, “Fibre
Bragg Grating Sensors for RTM Process Monitoring and Composite Structures
Health Monitoring”, The fourth Canadian International composite Conference,
August 19-22, Ottawa, Cancom 2003, Canada, Proceedings in CD-ROM Ppr-rvsd058.
242. L. Silva, M. Barré, H. Digonnet, C. Gruau T. Coupez, ‘Avancement et perspectives
dans la simulation numérique tridimensionelle de l’injection de polymères’ XVIème
Congrès Français de Mécanique, Nice, 1 a 5 de Setembro 2003.
243. P. Vieira, C. Romão, C. Roque, A. Zamora, A. T. Marques, J.L. Esteves,
“Mechanical Behaviour of Natural Fibre Reinforced Plastics Composites”,
ECOCOMP 2003 – 2nd Internacional Conference on EcoComposites, London,
England, 1-2/09/2003.
244. M.C.S. Ribeiro, P.R.O. Nóvoa, A.J.M. Ferreira, A.T. Marques, ‘Mechanical
behaviour of polymer concrete modified with light organic aggregates’, 2nd
International Conference on Eco-Composites, 1-2/09/2003, Queen Mary, University
of London, UK.
245. J. P. Nunes, F. W. J. Van Hattum, C. A. Bernardo, J. F. Silva, A. T. Marques,
“Improving Low-Cost Continuous Fibre Thermoplastic Composites by Tailoring
Fibre-Matrix Adhesion, Proceedings of the International Workshop on
thermoplastic matrix composites 2003, Gallipoli, Itália: 11-12/09/2003
246. J.L. Esteves, P. Vieira, A.T. Marques, “Fatigue Behaviour of Reinforced Concret
Beam Strengthened with a CFRP Reinforced System”, International Conference on
Composite in Construction CCC2003, Rende, Italy 16-19/9/2003
247. J. Justo, A. T. Marques, ‘High Velocity Impact Resistance of Composite Materials’,
7th International Conference DYMAT, Porto, /09/2003
248. R. de Oliveira, J.M.L. Reis, A.J.M. Ferreira, A.T. Marques, “An Acoustic Emission
Assessment of Fracture Properties of Fibre Reinforced Polymer Concrete”, 2nd
International Conference on Composite in Construction, Calabria, 16-19 Septembre
2003.
310
249. J. A. Simões, P. T. de Castro, A. T. Marques, ‘MSc Thesis in Industrial Design: An
Experience’, 1st International Meeting of Science and Technology of Design –
Senses and Sensibility in Technology, Linking Tradition to Innovation Through
Design, Lisboa, Portugal, 25-26/09/2003
250. H. Lopes, R.M. Guedes, M.A. Vaz and J.D. Rodrigues, "Experimental Response
and Numerical Simulation of Plates Submitted to Small Mass Impact", in
Proceedings of the Ninth International Conference on Civil and Structural
Engineering Computing, B.H.V. Topping, (Editor), Civil-Comp Press, Stirling,
United Kingdom, paper 38, 2003.
251. R. de Oliveira, O. Frazão, J. Ferreira, J.L. Santos, A.T. Marques, “Damage
Monitoring in Composite Materials using an Optical Fibre Acoustic Emission
Sensor”, 3rd International Conference on NDT of the Hellenic Society for NDT –
Non Destructive Testing in Antiquity and in Nowadays, 15-17 October 2003,
Chania, Crete-Greece.
252. A. J. M. Ferreira, J. A. T. Barbosa, Análise de cascas rebaixadas compósitas por um
método sem malha e teoria de Marguerre, CIBEM-VI Congresso Ibero-Americano
de Engenharia Mecânica Coimbra, 16-18 de Outubro de 2003, 639-644
253. M. F. S. F. de Moura, J. P. M. Gonçalves, A. G. Magalhães, P. T. de Castro,
“Elementos Finitos de Interface Aplicados ao Estudo da Resistência Mecânica de
Juntas Coladas”, VI Congresso Ibero-Americano de Engenharia MecânicaCIBEM6, 15-18/10/2003, pg. 597-602, Coimbra, Portugal.
254. J. P. Reina, A. T. Marques, J. D. Rodrigues, M. F. S. F. de Moura, “Influência das
Tensões Interlaminares nas Características Modais de Vibração de uma Placa
Laminada Compósita”, VI Congresso Ibero-Americano de Engenharia MecânicaCIBEM6, 15-18 Outubro de 2003, pg. 1745-1750, Coimbra, Portugal.
255. A. G. Magalhães, M. F. S. F. de Moura, “Análise do Tipo de Rotura em Juntas
Coladas de Sobreposição Simples Usando o Método de Emissão Acústica”, VI
Congresso Ibero-Americano de Engenharia Mecânica-CIBEM6, 15-18 Outubro de
2003, pg. 1807-1812, Coimbra, Portugal.
256. L.M.P.Durão, A. T. Marques, A.G.Magalhães, A.M.Baptista, “Maquinagem de
Materiais Compósitos de Matriz Polimérica”, VI Congresso Ibero-Americano de
Engenharia Mecânica-CIBEM6, 15-18/10/2003, pg. 1073-1078, Coimbra, Portugal.
257. A. J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, Radial basis functions and
higher-order shear deformation theories in the analysis of laminated composite
beams and plates, 12th International Conference on Composite Structures,
Melbourne, Austrália, 11/2003
258. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, V. Teixeira, A. P. M. Baptista, E.
Pereira, “Tribological Behaviour Of Cvd Diamond Films On Steel Substrates”,
"14th International Conference on Wear of Materials”, Washington,DC, EUA, 29
de Março a 4 de Abril de 2003.
259. L. Magalhães, A. Duarte, J. Seabra, H. Santos e C. Sá., Contact Fatigue Behaviour
Of Artificilly Indented Austempered Ductile Iron Discs, Proceedings of the
311
“MATERIAIS 2003” - II International Materials Symposium, Faculdade de
Ciências e Tecnologia – Universidade Nova de Lisboa, Caparica, Portugal, 14-16
de Abril, 2003 (Ref.TO 2.30).
260. R. I. Amaro, R. C. Martins, J. O. Seabra e A. T. Brito, Most Low Friction Coating
For Gears Application, Proceedings of the GEARS 2003 – Gears and Transmissions
Workshop, FEUP, Porto, Portugal, Junho de 2003, paper X, pages 203-230.
261. L. Magalhães e J. Seabra, Teeth Surface Failures In Austempered Ductile Iron (Adi)
Gears, Proceedings of the GEARS 2003 – Gears and Transmissions Workshop,
FEUP, Porto, Portugal, Junho de 2003, paper XIII, pages 269-286.
262. H. Lopes, R.M. Guedes, M.A. Vaz, J.D. Rodrigues, Experimental Response And
Numerical Simulation Of Plates Submitted To Small Mass Impact, CC2003_The
Ninth International Conference on Civil and Structural Engineering Computing.
263. J. Castro e J. Seabra., Experimental And Analytical Scuffing Criteria For Fzg
GEARS, Proceedings of the 30th "Leeds-Lyon Symposium" on Tribology, Lyon,
UK, 2 a 5 de Setembro de 2003.
264. F. J. G. Silva, A. J. S. Fernandes, F. M. Costa, A. P. M. Baptista, E. Pereira , “A
New Interlayer Approach For Cvd Diamond Synthesis On Steel Substrates”, “14th
European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes,
Nitrides & Silicon Carbide – Diamond 2003”, Salzburg (Austria), 7 a 12 de
Setembro de 2003.
265. A. Sottomayor, A. Campos, J. Seabra, L. Flamand e D. Nélias, Experimental
Evaluation And Numerical Simulation Of Mil-L-23699 Traction Curves,
Proceedings of the 30th,"Leeds-Lyon Symposium" on Tribology, Lyon, UK, 2 a 5
266. Ana Reis, Pedro Teixeira, J. Ferreira Duarte, Abel Santos, A. Barata da Rocha, A.
A. Fernandes, "Sheet Metal Forming of ‘Tailored Welded Blanks’ – Experimental
Results and Numerical Simulation", Proceedings of the 6th Esaform Conference on
Material Forming, pp. 207-210, Salerno, Italia, Abril 28-30, 2003.
267. Abel D. Santos, J. F. Duarte, Ana Reis, Pedro Teixeira, A. Barata Rocha, Ajmar, M.
Bertero, S. Saporita, "Reference Experimental Tests to be Used to Validate
Numerical Results in Sheet Metal Forming", II International Materials Symposium
Materiais 2003 da Sociedade Portuguesa de Materiais, A Materials Science Forum,
Faculdade de Ciências e Tecnologia, Campus da Caparica, 14 a 16 de Abril de
2003.
268. Pedro V. Vasconcelos, F. Jorge Lino, Paula Henrique, Rui J. Neto, “Contribution of
the Phase – Matrix Interface in the Behaviour of Aluminium Filled and Milled Fibre
Reinforced Epoxies”, II International Materials Symposium Materiais 2003 da
Sociedade Portuguesa de Materiais, A Materials Science Forum, Faculdade de
Ciências e Tecnologia, Campus da Caparica, 14 a 16 de Abril de 2003.
269. Pedro V. Vasconcelos, F. Jorge Lino, F. W. J. Van Hattum, Rui J. Neto,
“Mathematical Models for Particulate Filled and Milled Fibre Reinforced
Composites”, II International Materials Symposium Materiais 2003 of Sociedade
312
Portuguesa de Materiais, A Materials Science Forum, Faculdade de Ciências e
Tecnologia, Campus da Caparica, 14 a 16 de Abril de 2003.
270. F. Jorge Lino, Rui J. Neto, Ricardo Paiva, Ana Moreira, “Rapid Prototyping and
Rapid Tooling in Product Development of Ceramic Components”, II International
Materials Symposium Materiais 2003 of Sociedade Portuguesa de Materiais, A
Materials Science Forum, Faculdade de Ciências e Tecnologia, Campus da
Caparica, 14 a 16 de Abril de 2003.
271. M. Oliveira, S. Agathopoulos, J. Lino, J. M. F. Ferreira, “Interfacial Reactions
Thermodynamics in Doped Aluminosilicate Ceramics/Liquid Al-Alloy Contacting
Systems”, II International Materials Symposium Materiais 2003 of Sociedade
Portuguesa de Materiais, A Materials Science Forum, Faculdade de Ciências e
Tecnologia, Campus da Caparica, 14 a 16 de Abril de 2003.
272. F. Simões, J. Ferreira Duarte, J. J. Grácio, F. Barlat, “Effect of Static Recovery at
Room Temperature on the Mechanical Behaviour and Formability of an AA 6022T4 Sheet Sample”, II International Materials Symposium Materiais 2003 of
Sociedade Portuguesa de Materiais, A Materials Science Forum, Faculdade de
Ciências e Tecnologia, Campus da Caparica, 14 a 16 de Abril de 2003.
273. Abel D. Santos, J. Ferreira Duarte, Ana Reis, Pedro Teixeira, A. Barata da Rocha,
M. C. Oliveira, J. L. Alves, Luis Menezes, "Reference Experimental Results for
Validating Numerical Predictions in Sheet Metal Forming", AMPT2003, Dublin,
Irlanda, 8-11 Julho de 2003.
274. Abel D. Santos, J. Ferreira Duarte, Ana Reis, Pedro Teixeira, A. Barata da Rocha,
“Um “Benchmark” Experimental e a sua Utilização para a Validação de Resultados
Numéricos em Processos de Conformação Plástica de Chapas", 3º Congresso LusoMoçambicano de Engenharia, Maputo, Moçambique, 19 a 21 de Agosto de 2003.
275. J. Ferreira Duarte, Abel D. Santos, Ana Reis, Pedro Teixeira, A. Barata da Rocha,
A. A. Fernandes, "O Uso de ‘Tailored Welded Blanks’ na Conformação Plástica de
Chapas”, 3º Congresso Luso-Moçambicano de Engenharia, Maputo, Moçambique,
19 a 21 de Agosto de 2003.
276. F. Jorge Lino, Rui J. L. Neto, Ricardo Paiva, “Rapid Prototyping and Rapid Tooling
in Ceramic and Glass Industry”, 1st International Meeting of Science and
Technology of Design, Senses and Sensibility in Technology “Linking Tradition to
Innovation Through Design, IADE – Instituto de Artes Visuais, Design e
Marketing, pp. 122-26, Edited by ESD/IADE and UNIDCOM/IADE, Lisboa,
Portugal, 25 e 26 de Setembro de 2003.
277. F. Jorge Lino, Pedro Ala, Rui J. L. Neto, Bártolo Paiva, Ricardo Paiva, Rui Sousa,
“Indirect Rapid Tooling with Investment Casting and Ceramic Moulding”,
Proccedings of VRAP 2003, 1st International Conference on Advanced Research in
Virtual and Rapid Prototyping, pp. 517-24, Published by Escola Superior de
Tecnologia e Gestão de Leiria, Portugal, 1 a 4 de Outubro de 2003.
278. Teresa P. Duarte, F. Jorge Lino, A. Barbedo, Rui Neto, J. M. Ferreira, “Conversion
of Rapid Prototyping Models into Metallic Tools by Ceramic Moulding – an
Indirect Rapid Tooling Process”, Proceedings of VRAP 2003, 1st International
313
Conference on Advanced Research in Virtual and Rapid Prototyping, pp. 561-68,
Published by Escola Superior de Tecnologia e Gestão de Leiria, Portugal, 1 a 4 de
Outubro de 2003.
279. F. Simões, J. Ferreira Duarte, J. J. Grácio, F. Barlat, “Effect of Static Recovery at
Room Temperature on the Mechanical Behaviour of an AA 6022-T4”, Proceedings
from SheMet2003, University of Ulster, Belfast, Northern Ireland, pp. 397-405,
2003.
280. A. Col, Abel D. Santos, “3DS Project: Results Concerning Springback
Experiments”, IDDRG – International Deep Drawing Research Group 2003
Conference, Bled, Slovenia, pp.251-259, May 11-14, 2003.
281. C. Novo, A. N. Costa, M. Sousa, A. Torres Marques, O. Frazão, I. Dias, “Smart
Composite Plates for Health Monitoring of a Boat Structure”, 25th International
Sampe Europe Conference, March 30-April 1, 2004, Portes des Versailles, France,
pp. 113-118.
282. H. Faria, A.Vieira, J. Reis, A. T. Marques, R. M. Guedes, A. J. M. Ferreira, “Longterm behaviour of GRP pipes”, 6th International Conference on Durability Analysis
of Composite Systems DURACOSYS 2004, Riga-Latvia, May 12-15, 2004
283. J. H. Landolt, P. H. Magalhães, P. R. Nóvoa, J. Viana, A. T. Marques, “Low
Velocity Impact of Thermosetting Composite Systems Modified with Rubber and
Cork Powders”, 6th International Conference on Durability Analysis of Composite
Systems DURACOSYS 2004, Riga-Latvia, May 12-15, 2004
284. J. P. Nunes, J. F. Silva, F. W. J. Van Hattum; A. T. Marques, “Filament Winding
Processing Conditions To Produce Thermoplastic Composites From Towpregs”,
Proceedings of the ANTEC’04, Chicago, EUA, 16-20 Maio, 2004.
285. A. Torres Marques, C. Novo, A. N. Costa, M. Sousa, O. Frazão, I. Dias, “Health
Monitoring of a Large Composite Structure”, A054, 11th European Conference on
Composite Materials, ECCM11, May 31- June 3, 2004, Rhodes, Greece.
286. Ribeiro, J. Morais, N. Dourado, M. F. S. F. de Moura, “Simulação por Elementos
Finitos do Ensaio DCB para a Madeira de Pinus Pinaster AIT.”, CIMAD ’04 – 1º
Congresso Ibérico A Madeira na Construção, 25-26 March 2004, pg. 231-240.
287. M. F. S. F. de Moura, A. B. Pereira, A. B. Morais, “Simulação Numérica de
Curvas-R em Ensaios DCB de Laminados Unidireccionais e Cruzados de CarbonoEpóxido”, Congresso de Métodos Computacionais em Engenharia, 10 pages,
LNEC, Lisboa, 31 May-2 June 2004.
288. A. G. Magalhães, M. F. S. F. de Moura, “Avaliação Numérica e Experimental da
Influência da Assimetria Material em Juntas de Sobreposição Simples de Material
Compósito”, Congresso de Métodos Computacionais em Engenharia, 10 pages,
LNEC, Lisboa, 31 May-2 June 2004.
289. J. F. Silva, A. B. Morais, P. Vieira, A. T. Marques, P. T. Castro, “Fracture
Thoughness Characterization of Filament Wound Pipes Made with Thermoseting
and Thermoplastic Matrices”, 11 th European Conference on Composite Materials ECCM 11, Rhodes, Greece, 31/5-3/6/2004
314
290. F. Van Hattum, J. F. Silva, J. P. Nunes, C. A. Bernardo, P. Vieira, A. T. Marques,
“Tailoring Fibre-Matrix Adhesion of Low-Cost Continuous Fibre Thermoplastic
Composites”, 11 th European Conference on Composite Materials - ECCM 11,
Rhodes, Greece, 31/5-3/6/2004.
291. J. Costa Reis, J. C. Potes, L. Fialho, F. Capela e Silva, A. Cabrita, A., A. T.
Marques, J. A. , Simões, “In vivo study of a PEEK-Carbon hip prosthesis”,
BioÉvora 2004, II Congresso Ibérico de Biomateriais e XXVII Symposium of the
Sociedad Ibérica de Biomecânica y Biomaterials, 9 a 11/09/2004
292. J. Costa Reis, J. C. Potes, L. Fialho, A. T. Marques, J. A. Simões, “Citoxicity study
of carbon fibre reinforced PEEK”, BioÉvora 2004, II Congresso Ibérico de
Biomateriais e XXVII Symposium of the Sociedad Ibérica de Biomecânica y
Biomaterials, 9 a 11/09/2004
293. J.L. Esteves, P. Vieira, A.T: Marques, “Fatigue Behaviour of Reinforced Concrete
Beam Strengthened With a CFRP Reinforced System”, submitted para aceitação
em 11th European Conference on Composite Materials - ECCM 11, Rhodes,
Greece, 31/5-3/6/2004.
294. R. M. Guedes, P. H. Magalhães, F. Ferreira and J. L. Morais, RATEDEPENDENT
MECHANICAL BEHAVIOR OF CFRP LAMINATES UNDER COMPRESSION
LOADING, 11th European Conference on Composite Materials – ECCM11, May
31 - June 3, 2004. Rhodes, Greece, paper c 63.
295. R.M. Guedes, F.J. Ferreira, M.A. Vaz, P.H. Magalhães, Response of CFRP
Laminates under High Strain Rate Compression until Failure, 6th International
Conference on Durability Analysis of Composite Systems – DURACOSYS 2004,
Riga-Latvia, May 12-15, 2004
296. S. Gonçalves, P. Vieira, J.L. Esteves, “Mechanical Characterisation of Woll Fibres
for Reinforcing of Composite Materials”, submitted para aceitação em 11th
European Conference on Composite Materials - ECCM 11, Rhodes, Greece, 31/53/6/2004.
297. C. Romão, P. Vieira, J. L. Esteves, “ Mechanical Characterisation of Sisal Fibres
for Reinforcing of Composite Materials with several different surface treatments”,
submitted para aceitação em 11th European Conference on Composite Materials ECCM 11, Rhodes, Greece, 31/5-3/6/2004.
298. A. Vieira, O. Frazão, C. Novo, J. A. Simões, ”On the use of fiber grating sensors for
strain measurements in biomechanics”, European Society of Biomechanics, ESB
2004, 4-7/07/2004, Hertogenbosch, The Netherlands
299. M. C. S. Ribeiro, P. J. R. O. Nóvoa, A. T. Marques, A. J. M. Ferreira, Mechanical
characterization of lightweight wood-modified polymer concrete, submitted for
publication, Ciência e Tecnologia dos Materiais, Sociedade Portuguesa de
Materiais, 2004
300. A. J. M. Ferreira, Analysis of composite plates using a layerwise theory and radial
basis functions, Proceedings of the Seventh International Conference on
Computational Structures Technology, Lisboa, 2004, paper 32
315
301. A. J. M. Ferreira, C. M. C. Roque, R. M. N. Jorge, Modelling cross-ply laminated
elastic shells by a higher-order theory and multiquadrics, Proceedings of the
Seventh International Conference on Computational Structures Technology, Lisboa,
2004, paper 28
302. A. S. Ribeiro, A. M. P. de Jesus, A. M. V. Lima, A. J. M. Ferreira, A. A. Fernandes,
Comparison of mechanical behaviour of solid, laminated, and reinforced laminated
beams of PinusPinaster and Picea Abies species, Proceedings of the Third
International Conference of the European Society for Wood Mechnics, Vila Real,
2004, 301-309
303. F. Gentil, M. Moreira, M. parente, R. M. Natal Jorge, A. J. M. Ferreira, E. Almeida,
Ouvido médio: um estudo biomecânico, VIII Congresso Nacional de Mecânica
Aplicada Computacional/VI Congreso de Métodos Numéricos en Ingenieria,
Lisboa, Maio/Junho 2004
304. A. J. M. Ferreira, Análise de placas laminadas sandwich através de funções de base
radial e de uma teoria layerwise, VIII Congresso Nacional de Mecânica Aplicada
Computacional/VI Congreso de Métodos Numéricos en Ingenieria, Lisboa,
Maio/Junho 2004
305. Reina J. P., Marques A. T. e Rodrigues J. D., Previsão das Características de
Vibração e Amortecimento de um Laminado Compósito, VIII Congresso Nacional
de Mecânica Aplicada Computacional/VI Congreso de Métodos Numéricos en
Ingenieria, Lisboa, 2004.
306. A. J. M. Ferreira, Estudo de placas compósitas através do desenvolvimento de
polinómios de Legendre e funções de base radial, VIII Congresso Nacional de
Mecânica Aplicada Computacional/VI Congreso de Métodos Numéricos en
Ingenieria, Lisboa, Maio/Junho 2004
307. Luísa F. Bastos, João Manuel R. S. Tavares, “Improvement of Modal Matching
Image Objects in Dynamic Pedobarography using Optimization Techniques”,
Artigo submetido à ICPR2004 - 17th International Conference on Pattern
Recognition, Cambridge, United Kingdom, 23-26 August 2004.
308. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Estimation of Object’s
Movement by a Physical Approach using Lagrange's Equation, Finite Element
Method and Modal Analysis”, Artigo submetido à ICPR2004 - 17th International
Conference on Pattern Recognition, Cambridge, United Kingdom, 23-26 August
2004.
309. Ricardo Ferreira, João Manuel R. S. Tavares, Francisco Freitas, “Servomechanism
Control using Computational Vision with Based Approaches on Object Moments
and on Image Orientation Histograms”, Artigo submetido à ICPR2004 - 17th
International Conference on Pattern Recognition, Cambridge, United Kingdom, 2326 August 2004.
310. Luísa F. Bastos, João Manuel R. S. Tavares, “Objects Matching Improvement using
Optimization Techniques in a Geometric Modal Methodology”, WSCG'2004 - 12th International Conference in Central Europe on Computer Graphics, Visualization
and Computer Vision'2004, February 2 - 6, 2004, Prague, Czech Republic.
316
311. Luísa F. Bastos, João Manuel R. S. Tavares, “Matching of Objects Nodal Points
Improvement using Optimization”, IPDO - Inverse Problems, Design and
Optimization Symposium Rio de Janeiro, Brazil, Março de 2004.
312. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Morphing of Image Represented
Objects using a Physical Methodology”, SAC 2004 - The 19th ACM Symposium
on Applied Computing March 14 – 17, 2004, Nicosia, Cyprus.
313. Ribeiro, J. ; Vaz, M. A. P.; Piloto, P. A. G. ; “Medição de campos de tensões
recorrendo à técnica de Moiré”, Métodos Computacionais em Engenharia, (VIII
Congresso Nacional de Mecânica Aplicada e Computacional e VI Congreso de
Métodos Numéricos en Ingeniería), LNEC, 31 de Maio a 2 de Julho, Lisboa, 2004.
314. Guedes, R. M. ; Vaz, M. A. P. ; Magalhães, P. ; Ferreira, F. J. ; “Comportamento de
materiais compósitos solicitados a elevadas velocidades de deformação”, Métodos
Computacionais em Engenharia, (VIII Congresso Nacional de Mecânica Aplicada e
Computacional e VI Congreso de Métodos Numéricos en Ingeniería), LNEC, 31 de
Maio a 2 de Julho, Lisboa, 2004.
315. Mesquita, L. M. R. ; Piloto, P. A. G. ; Vaz, M. A. P. ; Vila Real, P. J. M. M. ;
“Influência das imperfeições na temperatura crítica de vigas sujeitas, à
encurvadura”; Métodos Computacionais em Engenharia, (VIII Congresso Nacional
de Mecânica Aplicada e Computacional e VI Congreso de Métodos Numéricos en
Ingeniería), LNEC, 31 de Maio a 2 de Julho, Lisboa, 2004.
316. Mota Silva, S. ; Rodrigues, J. F. D. ; Ribeiro, R. ; Vaz, M. A. P. ; Controlo de
vibrações de estruturas utilizando algoritmos genéticos para a localização óptima de
sensores /actuadores piezoeléctricos”; Métodos Computacionais em Engenharia,
(VIII Congresso Nacional de Mecânica Aplicada e Computacional e VI Congreso
de Métodos Numéricos en Ingeniería), LNEC, 31 de Maio a 2 de Julho, Lisboa,
2004.
317. Araújo, A. L. ; Lopes, H. M. R. ; Vaz, M. A. P. ; Mota Soares, C. M. ; Herskovits,
J. ; “Identificação de parâmetros elásticos e piezoeléctricos em estruturas activas do
tipo placa: técnicas de optimização clássica versus redes neuronais artificiais”;
Métodos Computacionais em Engenharia, (VIII Congresso Nacional de Mecânica
Aplicada e Computacional e VI Congreso de Métodos Numéricos en Ingeniería),
LNEC, 31 de Maio a 2 de Julho, Lisboa, 2004.
318. de Melo, F. J. Q. ; Ferreira, F. J. ; Vaz, M. A. P. ; Gomes, J. F. ; “Elastic-plastic
Stress Waves in Ductile-hardening Materials using Finite Element Techniques and
a Split-hopkinson Pressure Bar”, ICCES’04 International Conference on
Computational & Experimental Mechanics & Sciences, 26 a 29 de Julho, Funchal,
2004.
319. Ferreira, F. J. ; Vaz, M. A. P. ; de Melo, F. J. Q.; Justo, J. ; “Characterisation of a
Composite Material for Ballistic Protections” , ICCES’04 International Conference
on Computational & Experimental Mechanics & Sciences, 26 a 29 de Julho,
Funchal, 2004.
320. Lopes, H. M. R. ; Guedes , R. M. ; Vaz, M. A. P. ; Rodrigues, J. F. D.; “Study of
Transient Wave Propagation in Plates using Double Pulse TV Holography” ;
317
ICCES’04 International Conference on Computational & Experimental Mechanics
& Sciences, 26 a 29 de Julho, Funchal, 2004.
321. Marques, A.; Mendes, J. G. M. ; Ribeiro, R.; Vaz, M. A. P.; “Shear Forces in
Thickness-mode Piezoelectric ceramic Plates”, BIOÉvora 2004, II Congresso
Ibérico de Biomateriais, 9 a 11 de Setembro, Universidade de Évora, 2004.
322. R. Moreira, J. D. Rodrigues, Finite Element Modeling Of Viscoelastic Core
Sandwich Panels, Proceedings of the International Conference on Computacional
and Experimental Engineering and Sciences, Madeira, Portugal, July 2004.
323. A. Sottomayor, A. Campos, J. Seabra, L. Flamand e D. Nélias, Power Loss in Fzg
Gears Lubricated With Industrial Gear Oils: Biodegradable Ester Vs. Mineral Oil,
Proceedings of the 31th "Leeds-Lyon Symposium" on Tribology, Leeds, UK, 7 a 10
324. J. Castro e J. Seabra, Friction Coefficient Between Gear Teeth In Mixed Fil
Lubrication, Proceedings of the 31th "Leeds-Lyon Symposium" on Tribology,
Leeds, UK, 7 a 10 de Setembro de 2004.
325. R. Moreira, J. D. Rodrigues, A Layerwise Model For Soft Core Sandwich Panels,
Proceedings of the 7th International Conference on Computacional Structures
Technology, Lisboa, Portugal, 7-9 September 2004.
326. C.M.A. Vasques, J. D. Rodrigues, Classical And Optimal Active Vibration Control
Of Smart Piezoelectric Beams, Proceedings of the 7th International Conference on
Computacional Structures Technology, Lisboa, Portugal, 7-9 September 2004.
327. C.M.A. Vasques, B.Mace, P. Gardonio and J. D. Rodrigues, Finite Element
Modelling Of Beams With Arbitrary Active Constrained Layer Damping
Treatments, Proceedings of the 7th International Conference on Computacional
Structures Technology, Lisboa, Portugal, 7-9 September 2004.
328. Pedro V. Vasconcelos, F. Jorge Lino, Rui J. Neto, “Importance of the Vacuum in
Rapid Tooling of Polymeric-Based Moulds”, RPD 2004, Centimfe, Marinha
Grande, Portugal, October 2004.
329. Pedro V. Vasconcelos, F. Jorge Lino, António Magalhães, Rui J. Neto, “Impact
Fracture Study of Filled Epoxy Resins”, 12 Convencion Cientifica de Ingenieria Y
Arquitectura, V Congresso de Enginieria de Materiales”, Havana, Cuba, 30 de
Noviembre a 3 de Deciembre de 2004.
330. Abel D. Santos, P. Teixeira, J. F. Duarte, A. B. Rocha, “Experimental Benchmarks
and Finite Element Modeling in Sheet Metal Forming”, CMCE 2004, Lisboa,
pp.69, May 31- June 2, 2004.
331. A. Col, Abel D. Santos, “Final Results of the “3DS” Project”, IDDRG –
International Deep Drawing Research Group 2004 Conference, Sindelfingen,
Germany, pp.1-10, May 24-27, 2004.
332. Marta C. Oliveira, José L. Alves, Luís F. Menezes, Abel D. Santos, ”Numerical
Simulation of the Ram Tilting of the Blank Holder: Effect on the Blank Holder
318
Pressure Distribution”, IDDRG – International Deep Drawing Research Group
2004 Conference, Sindelfingen, Germany, pp.11-20, May 24-27, 2004.
333. M. C. Oliveira, J. L. Alves, L. F. Menezes and A. D. Santos, “Numerical Simulation
of the Deep Drawing Process: Modelling the Blank Holder”, NUMIFORM 2004 8th International Conference on Numerical Methods in Industrial Forming
Processes, pp.995-1000, The Ohio State University, Columbus, Ohio, U.S.A, June
13-17, 2004.
334. Ribeiro, J.; Vaz, M. A. P.; Piloto, P. A. G.; “Determinação Numérica e
Experimental dos Parâmetros de Calibração Aij e Bij para Caracterização de um
Campo de Tensões Residuais”; accepted for publication in Proceedings 4ª Jornadas
Politécnicas de Engenharia, 17 e 18 de Novembro, ISEP-IPP, 2004.
335. Teresa P. Duarte, F. Jorge Lino, “Microstructural Evolution of Ceramic Moulds
with the Sintering Temperature”, The Ceramographic Competition, 106th Annual
Meeting of the American Ceramic Society, Indianapolis, USA, April 18-21 2004.
336. P. Vasconcelos, F. Jorge Lino, Acácio Pereira, “Carbon and Glass Fiber Reinforced
Hybrid Composites”, 2004 International Metallographic Contest, The International
Metallographic Society´s Contest and Exhibition, Savannah, Georgia, USA, August
2004.
337. P. Vasconcelos, F. Jorge Lino, Acácio Pereira, “Aluminum Filled and Milled Fiber
Reinforced Composites for Epoxy Tooling”, 2004 International Metallographic
Contest, The International Metallographic Society´s Contest and Exhibition,
Savannah, Georgia, USA, August 2004.
338. P. Vasconcelos, F. Jorge Lino, Acácio Pereira, Rui Oliveira, “Birefrigency in
Fragmentation Tests of Sized Glass Fibers”, 2004 International Metallographic
Contest, The International Metallographic Society´s Contest and Exhibition,
Savannah, Georgia, USA, August 2004.
1.
N.F. Rilo, M.A.P.Vaz, J.F. Silva Gomes, R.A. Leal e J.M. Cirne, “A Avaliação do
Dano em Materiais Compósitos Laminados e a Investigação no Lome (FEUP) e no
Cemuc (FCTUC)”, 3º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Porto/Portugal, 22-24 de Março, 1999;
2.
J.L. Esteves e J.F. Silva Gomes, “Técnicas Experimentais de Análise de Tensões
em Juntas Adesivas”, 3º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Porto/Portugal, 22-24 de Março, 1999;
3.
J.F. Silva Gomes e M.A.P. Vaz, “A Holografia e Técnicas Afins na Mecânica
Experimental e Processos de Controlo Não Destrutivo”, 3º Encontro Nacional de
Análise Experimental de Tensões e Mecânica Experimental, Porto/Portugal, 22-24
de Março, 1999;
4.
J.M. Monteiro, M.A.P. Vaz, F.Q. Melo e J.F. Silva Gomes“Avaliação do Factor
Intensidade de Tensão ao Longo de uma Fenda Existente numa Placa, Utilizando
319
Técnicas de Interferometria Holográfica”, 3º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Porto/Portugal, 22-24 de
Março, 1999;
5.
A. Simões, J.M. Monteiro, M.A.P. Vaz e J.F. Silva Gomes, “Estudo da Interface
Osso/Implante Utilizando Técnicas de Interferometria Holográfica”, 3º Encontro
Porto/Portugal, 22-24 de Março, 1999;
6.
A.P. Amaro, J.M. Cirne, M.T. Vieira, M.A.P. Vaz e J.F. Silva Gomes, “Utilização
da Interferometria Laser na Determinação do Módulo de Young do Tungsténio”, 3º
Encontro Nacional de Análise Experimental de Tensões e Mecânica Experimental,
Porto/Portugal, 22-24 de Março, 1999;
7.
J.L. Esteves e J.E. Ribeiro. “Estudo Fotoelástico do Campo de Tensões em
Ligações Adesivas Estruturais”. 3º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, Porto, 24-26 Março 1999;
8.
M.S. Lucas, J.L. Esteves e M.A.P. Vaz. “Estudo de uma Ligação Adewsiva Topo a
Topo Entre Dois Materiais com Módulos de Elasticidade Diferentes”. 3º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental, Porto, 2426 Março 1999;
9.
F. Santos e M.A.P. Vaz. “Shearografia com Laser de Impulsos”. 3º Encontro
10. F. Santos e M.A.P. Vaz. “Análise de Vibrações com Laser de Impulsos”. 3º
Porto, 24-26 Março 1999;
11. J.A.O. Simões, J.M. Monteiro, M.A.P. Vaz e J.F. Silva Gomes. “Estudo da
Interface Osso/Implante Utilizando Técnicas de Interferometria Laser”. 3º Encontro
12. F.M. Santos, M.A.P. Vaz, F.Q. Melo, J.L. Esteves and J.F. Silva Gomes. “Medição
de Deslocamentos no Plano de uma Estrutura Reticular para o CERN”. 3º Encontro
13. J.F.Q. Melo, J.M. Monteiro, M.A. Vaz e J.F. Silva Gomes. “Avaliação do Factor de
Intensidade de Tensão numa Fenda Parcial Existente numa Placa, Utilizando
Técnicas de Interferometria Holográfica”. 3º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Porto, 24-26 Março 1999;
14. L. Ferreira, Estudo comparativo de óleos e massas lubrificantes em contactos
elastohidrodinâmicos. Actas do 3º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, INETI, Porto, Portugal, Março de 1999;
15. J. Rodrigues e H. Lopes, Determinação da intensidade estrutural em vigas por
análise modal. Actas do 3º Encontro Nacional de Análise Experimental de Tensões
e Mecânica Experimental, INETI, Porto, Portugal, Março de 1999;
320
16. J. Davim e A. Baptista, Uma abordagem sobre o desgaste das ferramentas e sua
relação com as forças de corte em processos de maquinagem, Actas do 3º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental, INETI,
Porto, Portugal, Março de 1999;
17. Rui Miranda Guedes, Mário Vaz, 1999. Influência da Viscoelasticidade no
Comportamento a Longo Prazo de Dois Laminados Compósitos. 3º Encontro
Nacional de Análise Experimental de Tensões e Mecânica Experimental, 24-26 de
Março, Porto;
18. M. F. S. F. Moura; João Paulo M. Gonçalves; A. Torres Marques; Paulo M. S.
Tavares de Castro; "Aplicação dum Critério de Modo Misto ao Estudo de
Solicitações de Compressão Após Impacto em Compósitos de Carbono-Epóxido";
3º Encontro Nacional sobre a Análise Experimental de Tensões e Mecânica
Experimental, INETI, Porto de 24 a 26 de Março de 1999, páginas 43 a 44;
19. A.T. Marques, A. Magalhães, M. Bexiga, F.M. Brito e S.C. Fonseca,
“Acompanhamento, por emissão acústica, de um ensaio de pressurização a uma
coluna de aço inox”, 3º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Porto, INETI, 24-26 Março, 1999;
20. Lucas M. Silva, J.L. Esteves, M.A. Vaz, ”Estudo de uma ligação topo a topo entre
dois materiais com módulos de elasticidade diferentes”, 3º Encontro Nacional de
Análise Experimental de Tensões e Mecânica Experimental, Porto, INETI, 24-26
Março, 1999;
21. L. Ferreira, J. Poço, Manutenção e Tribologia: Sua interligação e aplicações, 1º
Congresso Luso-Moçambicano de Engenharia, Maputo, Moçambique, 14-16
Setembro de 1999;
22. J A O Simões, A T Marques, “Prótese de anca: um caso não convencional de
projecto de engenharia”, Actas do 1º Congresso Luso-Moçambicano de Engenharia,
Maputo, Moçambique, 14-16 Setembro 1999, pp. I21-I27;
23. L. Ferreira, Aplicações da Informática à manutenção, Anais do 14º congresso
Brasileiro de Manutenção, Forte de Iguaçu, Brasil, Setembro de 1999;
24. J.F. Silva Gomes, “O Papel dos Institutos de Interface nas Relações UniversidadeIndústria. O caso do INEGI na FEUP”, 1º Congresso Luso-Moçambicano de
Engenharia, Maputo/Moçambique, 14-16 de Setembro, 1999;
25. R.M. Guedes, Previsão do Comportamento a Longo Prazo de Materiais
Compósitos, III Congresso Nacional de Materiales Compuestos, Málaga, Espanha,
1999;
26. A.T. Marques e A.N. Costa, Compilação de Medidas de Campo em Tubagens
Enterradas de PRFV, III Congresso Nacional de Materiales Compuestos, Málaga,
Espanha, 1999;
27. A.T. Marques e A.N. Costa, Garantia de Qualidade para Materiais Compósitos, III
Congresso Nacional de Materiales Compuestos, Málaga, Espanha, 1999;
321
28. J.F. Silva, J.P. Nunes, L. Silva , A.S. Pousada e A.T. Marques, Fabrico de
Towpregs, III Congresso Nacional de Materiales Compuestos, Málaga, Espanha,
1999;
29. A.N. Costa e A.T. Marques, Avaliação do Comportamento de Tubagens Enterradas
em PRFV, 3º Encontro Nacional de Análise Experimental de Tensões e Mecânica
Experimental, Porto, INETI, 24-26 Março, 1999;
30. J. Justo, J.F. Silva e A.T. Marques, Comportamento Balístico de Materiais
Compósitos, 3º Encontro Nacional de Análise Experimental de Tensões e Mecânica
Experimental, Porto, INETI, 24-26 Março, 1999;
31. A.J.M. Ferreira, J.T. Barbosa, A.T. Marques e J.C. Sá, Comportamento Instável de
Estruturas Tipo Casca em Materiais compósitos, 3º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Porto, INETI, 24-26 Março,
1999;
32. J.F. Silva e A.T. Marques, Estudo do Comportamento ao Impacto de Tubagem
Produzida por Enrolamento Filamentar, 3º Encontro Nacional de Análise
1999;
33. A.J.M. Ferreira, A.T. Marques, J.C. Sá e J.T. Barbosa, Validação Experimental de
Modelos de Cálculo de Estruturas Sandwich, 3º Encontro Nacional de Análise
1999;
34. J.A. Simões e A.T. Marques, Determinação da Rigidez Material de Compósitos
com Reforço por Entrelaçamento para o Fabrico de Próteses da Anca, 3º Encontro
INETI, 24-26 Março, 1999;
35. M.F. Moura, J.P. Gonçalves, A.T. Marques e P.T. Castro, Aplicação de um Critério
de Modo Misto ao Estudo de Solicitações de Compressão Após Impacto em
Compósitos de Carbono-Epóxido, 3º Encontro Nacional de Análise Experimental
de Tensões e Mecânica Experimental, Porto, INETI, 24-26 Março, 1999;
36. A.N. Costa e A.T. Marques, Avaliação do Comportamento de Reservatórios PRFV
Sujeitos a Pressões Exteriores, 3º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, Porto, INETI, 24-26 Março, 1999;
37. A.T. Marques, A. Magalhães, M. Bexiga, F.M. Brito and S.C. Fonseca,
Acompanhamento por Emissão Acústica de um Ensaio de Pressurização a uma
Coluna de Aço Inox, 3º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Porto, INETI, 24-26 Março, 1999;
38. M.R.A de Castro e A.T. Marques, “Comportamento de perfis pultrudidos sujeitos a
impacto de baixa velocidade”, 3º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, Porto, INETI, 24-26 Março, 1999;
39. João Manuel R. S. Tavares, J. Barbosa, A. Jorge Padilha, Determinação da
Correspondência entre Objectos, em Visão por Computador, Utilizando o Método
322
dos Elementos Finitos e Análise Modal, 4º Encontro Nacional do Colégio de
Engenharia Electrotécnica, Lisboa, Portugal, 27-28 de Maio de 1999;
40. Rui J. L. Neto, “A Prototipagem Rápida na Indústria de Fundição, Opção ou
Obrigação?”, Congresso Nacional de Fundição, APF, Porto, Portugal, Setembro
1999.
41. Teresa P. Duarte, F. Jorge Lino Alves, Rui J. L. Neto e Manuel S. Simão, “Fabrico
de Moldações Cerâmicas para Obtenção de Moldes para a Injecção de Plásticos por
Fundição de Precisão”, 9º Encontro da Sociedade Portuguesa de Materiais,
Universidade do Minho, Guimarães, Vol. 2, pp. 117-122, 21 a 23 Junho 1999.
42. Teresa P. Duarte, F. Jorge Lino Alves e Rui J. L. Neto, “Utilização de Ligas de
Cobre-Berílio no Fabrico de Moldes Metálicos por Fundição de Precisão”, 9º
Encontro da Sociedade Portuguesa de Materiais, Universidade do Minho,
Guimarães, Vol. 1, pp. 275-280, 21 a 23 Junho 1999.
43. F. J. Lino Alves, “Role of Grain Size on the Bridging Mechanism of Duplex (TwoPhase) Ceramics”, 9º Encontro da Sociedade Portuguesa de Materiais, Universidade
do Minho, Guimarães, Vol. 1, pp. 225-230, 21 a 23 Junho 1999.
44. Abel D. Santos, J. Ferreira Duarte, Ana Reis, A. Barata da Rocha, Rui Neto e
Ricardo Paiva, “Forjamento em Matriz Fechada: Simulação Numérica por
Elementos Finitos como Ajuda na Previsão do Comportamento do Material e
Optimização do Processo”, 9º Encontro da Sociedade Portuguesa de Materiais,
Universidade do Minho, Guimarães, Vol. 1, pp. 97-102, 21 a 23 Junho 1999.
45. Maria del Carmen P. Lobo Jacinto e A. P. Barbedo Magalhães, “Uma Nova
Perspectiva Sobre o Processo de Solidificação dos Ferros Fundidos Nodulares”, 9º
Encontro da Sociedade Portuguesa de Materiais, Universidade do Minho,
Guimarães, 21 a 23 Junho 1999.
46. Simões, J. A., Vaz, M. “ Análise experimental de tensões no domínio da
biomecânica”, VI Congresso Nacional de Mecânica Aplicada e Computacional, P.
V. Real e J. Grácio, eds., Universidade de Aveiro, Vol. 1, pp. 233-242, Aveiro,
2000;
47. Rilo, N.F.; Peixinho, N.; Vaz, M.A.P.; Leal, R. A.; Cirne, J.M.;”Determinação
experimental do modulo de rigidez ao corte no plano de materiais compostos
usando holografia”, P. V. Real e J. Grácio, eds., Universidade de Aveiro, Vol. 1, pp.
295-302, Aveiro, 2000;
48. Guedes, R.M.; Vaz, M.A.P.; Camanho, P.;”Estudo da fluência em betões
poliméricos”, P. V. Real e J. Grácio, eds., Universidade de Aveiro, Vol. 1, pp. 501507, Aveiro, 2000;
49. Monteiro, J. M., Vaz, M., Simões, J. A., “Study using interferometry speckle of the
influence of implant-bone interface fixation conditions”, 5th Portuguese Conference
on Biomedical Engineering, 26-27 May, Coimbra, 2000;
50. R. Martins e J. Seabra, Influência do tipo de lubrificante sobre a dissipação
energética de uma engrenagem FZG-A, Actas das 7as Jornadas Portuguesas de
323
Tribologia, paper 63, Instituto Superior de Engenharia do Porto, Portugal, Junho de
2000, páginas 87-90;
51. R. Amaro, S. Yang e J. Seabra, Estudo da aplicabilidade do revestimento de
Graphite-iC em engrenagens, Actas das 7as Jornadas Portuguesas de Tribologia,
paper 85, Instituto Superior de Engenharia do Porto, Portugal, Junho de 2000,
páginas 135-138;
52. A. Monteiro Baptista, Juvenal Ferreira, Nuno Pinto, Ensaios de micro-abrasão por
esfera rotativa, Actas das 7as Jornadas Portuguesas de Tribologia, paper 32,
Instituto Superior de Engenharia do Porto, Portugal, Junho de 2000, páginas 21-24;
53. F. Silva, A. M. Baptista, E. Pereira, V. Teixeira, Q. H. Fan, A. Fernandes, F. Costa,
Estudo da nucleação de diamante em filmes intermédios de Ti e Cr para aplicações
tribológicas, Actas das 7as Jornadas Portuguesas de Tribologia, paper 84, Instituto
Superior de Engenharia do Porto, Portugal, Junho de 2000, páginas 131-134;
54. A. Rangel, L. A. Ferreira, Novas metodologias de manutenção aplicadas a sistemas
ferroviários, Actas do 2º Congresso Nacional do Transporte Ferroviário, Lisboa,
Janeiro de 2000;
55. L.A. Ferreira, Novas estratégias de manutenção, Actas do Simpósio de Manutenção,
EXPONOR, Matosinhos, Novembro de 2000;
56. L. A. Ferreira, Engenharia de manutenção, Actas do 2º Encontro Nacional do
Colégio de Engenharia Mecânica da Ordem dos Engenheiros, Coimbra, Dezembro
de 2000;
57. J. P. M. Gonçalves, M. F. S. F. Moura, P. T. Castro e A. T. Marques, "Estudo de
Propagação de Dano em Modo I, Modo II e Modo Misto em Interfaces Usando
Elementos Finitos de Interface com Restrição Ponto-Superfície", 7ª Jornadas de
Fractura de 16-18 de Fevereiro de 2000 na Covilhã, p.p. 64 – 71;
58. J. L. Morais, M. S. Moura, J. C. Xavier, A. T. Marques, "In-Plane Mechanical
Behaviour of a Glass/Epoxy Composite", Livro de Actas do 2º Encontro Nacional
da Sociedade Portuguesa de Reologia de 7 a 8 de Abril de 2000, FEUP, Porto, p.p.
243-252;
59. M. F. S. F. Moura, João Paulo M. Gonçalves, A. Torres Marques e Paulo M. S.
Tavares de Castro,"Previsão da Resistência à Compressão de Laminados de
Carbono-Epóxido Contendo Delaminagem Provocada por Impacto de Baixa
Velocidade", VI Congresso Nacional de Mecânica Aplicada e Computacional de
17-19 de Abril de 2000 em Aveiro, p.p. 491-499;
60. J. L. Morais, M. S. Moura, J. C. Xavier, A. T. Marques, "Tensões Higrotérmicas em
Estruturas de Materiais Compósitos de Matriz Polimérica", 2º Encontro Nacional do
Colégio de Engenharia Mecânica da Ordem dos Engenheiros em Dezembro de 2000
em Coimbra;
61. M. F. S. Moura e J. P. M. Gonçalves, "Aplicação de Elementos Finitos de Interface
e dum Critério de Modo Misto ao Estudo de Solicitações de Impacto de Baixa
Velocidade em Compósitos de Carbono-Epóxido", 2º Encontro Nacional do
324
Colégio de Engenharia Mecânica da Ordem dos Engenheiros em Dezembro de 2000
em Coimbra;
62. O. Frazão, F. M. Araújo, L. A. Ferreira, I. Dias, A. T. Marques, A. N. Costa e C.
Novo Placa de Compósito Incorporando Sensores de Bragg em Fibra Óptica; VI
Congresso Nacional de Mecânica Aplicada e Computacional, Aveiro, 17 a 19 Abril
2000;
63. J.L. Esteves, “Aplicação de Elementos Finitos Mistos à Análise de Ligações
Adesivas”, VI Congresso Nacional de Mecânica Aplicada e Computacional,
Universidade de Aveiro, 17-19 Abril, 2000;
64. C. M. Tavares, M.C. Ribeiro, M. Figueiredo, António J. M. Ferreira, António
Augusto Fernandes, Comportamento de betões de resina poliester e epoxidica,
Betão Estrutural 2000, Porto, pp. 55-64;
65. A.J.M. Ferreira, P.P.Camanho, , A. T.Marques, A. A. Fernandes, Comportamento
de betões reforçados com varões de materiais compósitos, VI Congresso nacional
de Mecânica Aplicada e Computacional, Aveiro, Portugal, 323-332, 2000;
66. A T Marques, ‘Materiais Compósitos Estruturais’, 2º Semana Aberta de Engenharia
Mecânica, Núcleo de Estudantes de Engenharia Mecânica, UTAD e NERVIR, Vila
Real,15 – 19/5/ 2000;
67. J P Nunes, A S Pouzada, J F Silva, P J Novo,. e A T Marques, Desenvolvimento de
uma Máquina para Produção de Towpregs de Matriz Termoplástica, Seminário do
Departamento de Engenharia de Polímeros da Universidade do Minho, 20-22
Setembro, Guimarães, Portugal, 2000;
68. J P Nunes, A S Pouzada, J F Silva, P J Novo e A T Marques, Development and
Applications of Low Cost Thermoplastic Composites from Towpregs, Invited
Lecture for the Deutch Automobile Strutures Manufacturers, TUD-TNO, 29
Setembro, Delft, Holanda, 2000;
69. A B Morais, A T Marques, P T de Castro. "Estudo da aplicação de ensaios de
fractura interlaminar de modo I a laminados compósitos multidireccionais", 7as
Jornadas de Fractura, Covilhã, Fevereiro de 2000, pp. 90-95;
70. A B Morais, A T Marques, "Um modelo de previsão da resistência à compressão de
da camada de laminados compósitos", 6º Congresso Nacional de Mecânica
Aplicada e Computacional, Aveiro, Abril de 2000, Vol. 1, pp.615-623;
71. J J L Morais, M F S F Moura, J C Xavier, A T Marques, "In-plane mechanical
behaviour of a glass/epoxy composite", 2º Encontro Nacional da Sociedade
Portuguesa de Reologia, SPR, FEUP, Porto, 2000, pp. 243 – 252;
72. A J M Ferreira, P P Camanho, , A. T Marques, A. A. Fernandes, Comportamento de
betões reforçados com varões de materiais compósitos, VI Congresso nacional de
Mecânica Aplicada e Computacional, Aveiro, 17 – 19 Abril 2000, pp.323 – 332;
73. O Frazão, F M Araújo, L A Ferreira, I Dias, A T Marques, A N Costa, C Novo
“Placa de Compósito Incorporando Sensores de Bragg em Fibra Óptica”, VI
325
Congresso Nacional de Mecânica Aplicada e Computacional, Aveiro, 17 – 19 Abril
2000;
74. J P M Gonçalves, M F S F Moura, P M S T de Castro, A T Marques, "Estudo de
Propagação de Dano em Modo I, Modo II e Modo Misto em Interfaces Usando
Elementos Finitos de Interface com Restrição Ponto - Superfície", 7ª Jornadas de
Fractura, Covilhã, 16-18 Fevereiro 2000, pp. 64 – 71;
75. M F S F Moura, J P M Gonçalves, A T Marques, P M S T de Castro, "Previsão da
Resistência à Compressão de Laminados de Carbono - Epóxido Contendo
Delaminagem Provocada por Impacto de Baixa Velocidade", VI Congresso
Nacional de Mecânica Aplicada e Computacional, Aveiro, 17-19 Abril 2000, pp.
491-499;
76. A T Marques, J P M Gonçalves, M F S F Moura, P M S T Castro, “ Estudo do
comportamento de ligações adesivas usando elementos de interface”, VI Congresso
Nacional de Mecânica Aplicada e Computacional, Aveiro, 17-19 Abril 2000;
77. A T Marques, R M Guedes, “Previsão da vida residual de estruturas em materiais
compósitos”, VI Congresso Nacional de Mecânica Aplicada e Computacional,
Aveiro, 17-19 Abril 2000;
78. A J M Ferreira, P P Camanho, A T Marques, A A Fernandes, “Comportamento de
betões reforçados com varões de materiais compósitos”, VI Congresso Nacional de
Mecânica Aplicada e Computacional, Aveiro, 17-19 Abril 2000;
Correspondência entre Modelos de Contorno e de Superfície, Utilizando
Modelização por Elementos Finitos e Análise Modal, em Visão por Computador,
VI Congresso Nacional de Mecânica Aplicada e Computacional Aveiro, Portugal,
17-19 de Abril de 2000;
Correspondência entre Objectos utilizando Modelação Física, 9º Encontro
Português de Computação Gráfica, Marinha Grande, Portugal, 16-18 de Fevereiro
de 2000;
81. F. Jorge Lino, M. Teresa Duarte e Emanuel Fonseca, “Utilização na Indústria de
Fundição de Componentes Cerâmicos Revestidos por Projecção à Chama”, 2º
Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros,
pp. 4.41-4.48, Coimbra, 15-16 Dezembro 2000.
82. F. Jorge Lino e Rui J. Neto, “A Prototipagem Rápida na Indústria Nacional”, 2º
Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros,
pp. 4.15-4.22, Coimbra, 15-16 Dezembro 2000.
83. M. Patrocínio, J. F. Duarte, A.A. Fernandes, “Soldadura Laser de Chapa Fina em
Liga de Aço ao Carbono”, 2º Encontro Nacional do Colégio de Engenharia
Mecânica da Ordem dos Engenheiros, Coimbra, 15-16 Dezembro 2000.
84. João Rocha e F. Jorge Lino, “Utilização de Moldações Cerâmicas Compósitas no
Fabrico de Ferramentas Metálicas”, 2º Encontro Nacional do Colégio de
326
Engenharia Mecânica da Ordem dos Engenheiros, pp. 4.33-4.40, Coimbra, 15-16
Dezembro 2000.
Ricardo Paiva, “Forjamento de Ligas de Alumínio: Trabalho Experimental e
Simulação Numérica por Elementos Finitos“, VI Congresso Nacional de Mecânica
Aplicada e Computacional, Aveiro, Portugal, pg. 1223, 17-19 de Abril 2000.
86. Luísa Costa Sousa, Francisco M. A. Pires, Abel D. Santos e J. César de Sá,
“Modelação de Simulação Numérica para o Forjamento Incluindo os Efeitos
Térmicos“, VI Congresso Nacional de Mecânica Aplicada e Computacional,
Aveiro, Portugal, pp. 1361-1369, 17-19 de Abril 2000.
87. F. Jorge Lino Alves, “Cerâmicos: Materiais em que Vale a Pena Pensar”, 7as
Jornadas de Fractura da SPM, pp. 204-218, Univ. da Beira Interior, Covilhã, 16-18
Fevereiro 2000.
88. F. Jorge Lino, T. Pereira Duarte e J. Manuel Teixeira, “Fabrico de Componentes
Cerâmicos com Resistência à Fractura Optimizada”, 7as Jornadas de Fractura da
SPM, pp. 248-254, Univ. da Beira Interior, Covilhã, 16-18 Fevereiro 2000.
89. Pedro V. Vasconcelos, José M. F. Ferreira , F. Jorge Lino, “Caracterização
Estrutural e Mecânica de Materiais Porosos à Base de Diatomite”, 7as Jornadas de
Fractura da SPM, pp. 222-229, Univ. da Beira Interior, Covilhã, 16-18 Fevereiro
2000.
90. J.F. Silva Gomes, “Ligação Universidade-Indústria. Inovação, Investigação e
Desenvolvimento”, 2º Congresso Luso-Moçambicano de Engenharia,
Maputo/Moçambique, 4-6 de Setembro de 2001;
91. F. M. Santos; J. Monteiro; M. A. P. Vaz e J. F. Silva Gomes; “A Shearography na
Inspecção não destrutiva de Materiais Compósitos”; 4º Encontro Nacional de
Análise Experimental de Tensões e Mecânica Experimental, 17 a 19 de Outubro de
2001, IPB, Bragança;
92. Monteiro, J. M.; Santos, F. M.; Vaz, M. A. P. e Silva Gomes, J. F.; “Uso de
Técnicas Interferométricas Pulsadas para Inspecção Não destrutiva de Estruturas
Compósitas”; 4º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, 17 a 19 de Outubro de 2001, IPB, Bragança;
93. Nuno F. Rilo; Nuno Peixinho; Mário A. P. Vaz; Rogério A. C. P. Leal e José M. O.
S. Cirne; “Avaliação Experimental da Rigidez ao Corte no Plano de Placas
Compositas Laminadas Usando ESPI”; 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, 17 a 19 de Outubro de 2001,
IPB, Bragança;
94. Nuno F. Rilo; Mário A. P. Vaz; Rogério A. C. P. Leal e José M. O. S. Cirne;
“Determinação Experimental de Constantes de Rigidez de Placas Compósitas
Reforçadas Usando ESPI”; 4º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, 17 a 19 de Outubro de 2001, IPB, Bragança;
327
95. Chousal, J. A. G.; “Medição de Deslocamentos no Plano Através da Correlação
Espacial de Imagem”; 4º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, 17 a 19 de Outubro de 2001, IPB, Bragança;
96. Tavares, P. J.; Vaz, M. A. P.; Chousal, J. G.; “Perfilometria Tridimensional por
Utilização de Campos de Luz Estruturada”; 4º Encontro Nacional de Análise
IPB, Bragança;
97. Fonseca, E. M. M.; Mesquita, L. R.; Caleiro, C.; Lopes, H.; Vaz, M. A. P.;
“Determinação do Factor de Concentração de Tensões em Placas Utilizando a
Extensometria com Comparação Numérica”; 4º Encontro Nacional de Análise
IPB, Bragança;
98. Piloto, P. A. G.; Vila Real, P. J. M. M. F.; Vaz, M. A. P. ;”Análise Experimental e
Numérica da Influência das Condições de Apoio na Encurvadura Lateral de Vigas
Metálicas”; 4º Encontro Nacional de Análise Experimental de Tensões e Mecânica
Experimental, 17 a 19 de Outubro de 2001, IPB, Bragança;
99. Branco, P. A. D.; Vaz, M. A. P.; “Utilização de Técnicas Experimentais e
Numéricas na Verificação do Dimensionamento das Espiras do Enrolamento de um
Transformador tipo “Core” 4º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, 17 a 19 de Outubro de 2001, IPB, Bragança;
100. L. Carvalho; M. S. C. Saraiva; J. A. Simões e M. A. P. Vaz;”Determinação de
Extensões Dinâmicas sobre uma Mandíbula Cadavérica”; 4º Encontro Nacional de
Análise Experimental de Tensões e Mecânica Experimental, 17 a 19 de Outubro de
2001, IPB, Bragança;
101. J. A. Guedes; J. Monteiro; M. A. P. Vaz; J. A. Simões; “Comparação do Campo de
Deslocamentos de um Fémur Intacto e com uma Prótese do Tipo Press-Fit”; 4º
17 a 19 de Outubro de 2001, IPB, Bragança;
102. Ferreira, F. J.; Vaz, M. A. P.; Melo, F. Q. E Cirne, J. M. S.; “Caracterização
Mecânica de Materiais sob Elevadas Taxas de Deformação”; 4º Encontro Nacional
de Análise Experimental de Tensões e Mecânica Experimental, 17 a 19 de Outubro
de 2001, IPB, Bragança;
103. A T Marques, “Aplicações de materiais compósitos estruturais”, Palestras de
Engenharia, UTAD, Vila Real, 11 Janeiro 2001;
104. A T Marques, “Materiais compósitos: um desafio permanente”, comunicação
escrita inserida no Dossier Especial do Semanário Expresso ‘Materiais para o Novo
Milénio’, 26 Março 2001;
105. J J L Morais, R J S C M Guedes, A T Marques, “The validity of time - temperature
superposition principle for polymer - based composite materials”, 3º Encontro
Nacional da Sociedade Portuguesa de Reologia, Mirandela, 26-28 Abril 2001;
106. A T Marques, “Materiais compósitos e oportunidades de negócio: perspectivas e
desafios”, XIX Seminário da APIP, Tomar, 1-2 Junho 2001;
328
107. M F S F Moura, ‘Aplicações de elementos finitos de interface a problemas
estruturais em materiais compósitos’, Tertúlias Compósitas, INEGI, Julho de 2001;
108. N Crainic, A T Marques, D Bica, P J Nóvoa, L Vekas; C P M Sá, ‘Characterization
of behaviour of nanomagnetic composites’, TNT 2001 Conference Trends in
NanoTechnology, Segóvia, Espanha, 3-7 September 2001;
109. L. A. Ferreira, RAMS- Reliability, Availability, Maintenability and Safet,
MAINTEC’2001, Lisboa, 24 de Maio 2001;
110. J. Claro e L. A. Ferreira, Aplicação da Mecânica da Fractura ao Estudo de
Contactos Elastohidrodinâmicos, 4º Encontro Nacional da APAET, Bragança, 17 e
18 de Outubro 2001;
111. L. A. Ferreira, Novas Estratégias de Manutenção, Jornadas de Manutenção da
APMI, Lisboa, 9 de Novembro 2001;
112. L. A. Ferreira, Como Atingir Níveis Elevados de Disponibilidade e Segurança em
Sistemas Complexos, 3º Congresso Nacional do Transporte Ferroviário, Porto, 20 a
22 de Novembro 2001;
113. L. A. Ferreira, Manutenção e Subcontratação, Seminário “Como desenvolver uma
estratégia comum de produção e manutenção industrial”, Lisboa, 29 e 30 de
Novembro 2001;
114. H. Reis Lopes, J. Dias Rodrigues, Determinação experimental da intensidade
estrutural em vigas, 4º Encontro Nacional de Análise Experimental de Tensões e
Mecânica Experimental, Bragança, Outubro de 2001, pp.27-28;
115. C. M. A. Vasques, J. Dias Rodrigues, Modelação do comportamento dinâmico de
Vigas Sandwich com camadas piezoeléctricas, 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, Bragança, Outubro de 2001,
pp.37-38;
116. A. Monteiro Baptista, Ensaios de desgaste para caracterização tribológica de
revestimentos, Comunicação Convidada, GRF-2001, 2ªs Jornadas do Grupo de
Revestimentos Funcionais, Universidade do Minho, Braga, 17 Dezembro 2001;
117. J. G. Silva, A. M. Baptista, E. Pereira, V. Teixeira, Joana, A.J.S. Fernandes,
Florinda Costa, Estudo de filmes intermédios compósitos com vista à síntese de
filmes de diamante CVD sobre substratos ferrosos, GRF-2001, 2ªs Jornadas do
Grupo de Revestimentos Funcionais, Universidade do Minho, Braga, 17 Dezembro
2001;
118. J.L.Morais, R. M. Guedes, A.T.Marques, ‘The validity of Time-temperatureMoisture Superposition Principle for Polymer-Based Composite Materials. 3º
Encontro da Sociedade Portuguesa de Reologia, Mirandela., 26-28 Abril 2001;
119. C. M. L. Tavares, R. J. C. M Guedes, A. J. M. Ferreira, 2001. Análise do
Comportamento de Betões Poliméricos Reforçados com Varões de Materiais
Compósitos, Sujeitos a Fluência em Flexão. 4º Encontro Nacional de Análise
Experimental de Tensões e Mecânica Experimental, 17-19 Outubro, Bragança;
329
120. A F Vieira, J Reis, J A O Simões, A T Marques, “Influência da rigidez material da
prótese femoral nas microextensões desenvolvidas na superfície do fémur”, 4º
Encontro Nacional sobre a Análise Experimental de Tensões e Mecânica
Experimental, APAET, Bragança, 17-19 Outubro 2001;
121. R Oliveira, A T Marques, “Aplicação da emissão acústica no acompanhamento de
um ensaio de tracção dum provete monofilamentar de poliester e fibra de vidro”, 4º
Encontro Nacional sobre a Análise Experimental de Tensões e Mecânica
Experimental, APAET, Bragança, 17-19 Outubro 2001.
122. Rui J. Neto, Bártolo Paiva e Ricardo Paiva, “Obtenção de Protótipos Metálicos para
Fundição Injectada”, 11º Congresso Nacional de Fundição, Porto, A Indústria de
Fundição Face à Globalização dos Mercados, Porto, 7-9 Novembro 2001.
123. Maria del Carmen P. L. Jacinto, A. P. Magalhães, “Uma Contribuição para Melhor
Avaliar a Correlação Existente entre a Microestrutura e as Características
Mecânicas do ADI”, 11º Congresso Nacional de Fundição, Porto, A Indústria de
Fundição Face à Globalização dos Mercados, Porto, 7-9 Novembro 2001.
124. F. Jorge Lino e H. Fernandes, “Estudo do Efeito de Reparações de Veículos
Acidentados nas suas Propriedades Mecânicas”, 1as Jornadas Politécnicas de
Engenharia, Auditório da Escola Superior de Tecnologia e Gestão de Leiria, Leiria,
14-16 Novembro 2001.
125. F. Jorge Lino, Henry Camboa, Bártolo Paiva, Ricardo Paiva e Rui J. Neto,
“Conversão Directa de Modelos Obtidos por Prototipagem Rápida”, 1as Jornadas
Politécnicas de Engenharia, Auditório da Escola Superior de Tecnologia e Gestão
de Leiria, Leiria, 14-16 Novembro 2001.
126. Teresa P. Duarte, F. Jorge Lino e Rui J. Neto, “Conversão de Modelos em
Ferramentas Metálicas Utilizando Moldações Cerâmicas”, 1as Jornadas Politécnicas
de Engenharia, Auditório da Escola Superior de Tecnologia e Gestão de Leiria,
Leiria, 14-16 Novembro 2001.
127. Pedro Vasconcelos, F. Jorge Lino e Rui J. Neto, “Estudos de Optimização do
Fabrico de Ferramentas em Resinas Carregadas”, 1as Jornadas Politécnicas de
Engenharia, Auditório da Escola Superior de Tecnologia e Gestão de Leiria, Leiria,
14-16 Novembro 2001.
128. Maria del Carmen P. L. Jacinto, A. P. Magalhães, “Estudo da Cinética de
Transformação da Reacção de Austêmpera por Dilatometria de Têmpera”, 1as
Jornadas Politécnicas de Engenharia, Auditório da Escola Superior de Tecnologia e
Gestão de Leiria, Leiria, 14-16 Novembro 2001.
129. M. Ricardo, A. P. Silva, J. S. Costa, A. J. M. Ferreira, A. A. Fernandes, P.
Bamforth, Abordagem probabilistica à previsão do custo do ciclo de vida de
edificios e infra-estruturas civis-Projecto Eurolifeform, X Congresso Anual da
Sociedade Portuguesa de Estatística, Porto, 2002, 205-206
130. J. M. L. Reis, A. J. M. Ferreira, ‘Fracture properties of polymer concrete’, 8th
Portuguese Conference on Fracture, Vila Real,22/02/2002
330
131. P. P. Camanho, C. G. Dávila e M. F. S. F. de Moura, “Simulation of Fracture in a
Skin-Stiffener Composite Structure”, 8ª Jornadas de Fractura, Vila Real, UTAD,
20-22/02/2002, pp.385 - 389.
132. J F Silva, P Vieira, A B de Morais, A T Marques, P T de Castro, “ Mode II fracture
toughness of glass fibre reinforced composites”, 8as Jornadas de Fractura, SPM,
Vila Real, 20-22/2/ 2002
133. J. A. Simões, A. T Marques, P. M. S. T de Castro, ”Design Industrial: promover o
diálogo entre Engenheiros e Designers através de um curso de Mestrado”, XIV
Congresso – O Ensino da Engenharia, Ordem dos Engenheiros, 27 – 29/06/2002,
Coimbra (in CD-ROM)
134. R. Hernandez, R. Neves, A. Alves e J. Seabra, Ensaio de Rolamentos na Máquina
de 4 Esferas, Actas das 8as Jornadas Portuguesas de Tribologia, Departamento de
Engenharia Mecânica, Universidade de Aveiro, Portugal, Maio de 2002.
135. L. Magalhães e J. Seabra, Indentações Artificiais para o Estudo da Fadiga de
Contacto em Discos de Ferro Nodular Austemperado, Actas das 8as Jornadas
Portuguesas de Tribologia, Departamento de Engenharia Mecânica, Universidade
de Aveiro, Portugal, Maio de 2002.
136. A. Campos, A. Sottomayor, J. Castro e J. Seabra, Determinação do Coeficiente de
Atrito em Engrenagens Usando um Modelo de Lubrificação Mista, Actas das 8as
Jornadas Portuguesas de Tribologia, Departamento de Engenharia Mecânica,
Universidade de Aveiro, Portugal, Maio de 2002.
137. Pedro V. Vasconcelos, F. Jorge Lino, e Rui. J. Neto, “Utilização de Fibras Moídas
no Fabrico de Ferramentas de Matriz Polimérica”, 2ªs Jornadas Politécnicas de
Engenharia, Escola Superior de Tecnologia de Setúbal, 13 e 14 Novembro 2002.
138. F. Jorge Lino, Rui J. L. Neto, Ricardo Paiva, e Bártolo Paiva, “Desenvolvimento de
Protótipos Metálicos para a Indústria Automóvel por Fundição Injectada”, 2ªs
Jornadas Politécnicas de Engenharia, Escola Superior de Tecnologia de Setúbal, 13
e 14 Novembro 2002.
139. N.C. Loureiro, P. Vieira, J.P. Bento, J.L.Esteves, “Reabilitação de Estruturas de
Betão Reforçadas com CFRP usando o Método de Enrolamento Filamentar”, 1º
Encontro Nacional sobre PATOLOGIA E REABILITAÇÃO DE EDIFÍCIOS
PATOREB, FEUP, Porto, 18-19/3/2003
140. José Simões, P. Castro, A. Marques, J. Aston, ‘The industrial Design MSC Course
Programme and Students Projects Developed’, USE(R)DESIGN, Lisboa, 2730/03/2003
141. R. de Oliveira, O. Frazão, J.L. Santos, A.T. Marques, “Sensores em fibra óptica
para detecção em tempo-real de danos em materiais compósitos inteligentes”, VII
Congresso de Mecânica Aplicada e Computacional, Évora, 14-16 Avril 2003.
142. J. Justo, A. T. Marques, “ Estdudo da resistência ao impacto de alta velocidade em
materiais compósitos”, VII Congresso Nacional de Mecânica Aplicada e
331
Computacional, Évora, 14-16/4/2003, editor Joaquim Infante Barbosa (ISBN 972
778 058 X), vol. 1, pp. 387-396
143. A. B. Morais, M. F. S. F. de Moura, A. T. Marques, P. M. S. T. de Castro, ”Fractura
Interlaminar em Modo I de Compósitos Carbono/Epóxido do Tipo [0º/90]”, VII
Congresso de Mecânica Aplicada e Computacional, Universidade de Évora, 14 a 16
de Abril de 2003
144. A. J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, “Resolução do problema de
Poisson 2D por um método sem malha”, VII Congresso Nacional de Mecânic
Aplicada e Computacional, Évora 2003, 2129-2138
145. A. J. M. Ferreira, C. M. C. Roque, P. A. L. S. Martins, Estudo de vigas e placas em
materiais compósitos por funções de base radial, VII Congresso Nacional de
Mecânica Aplicada e Computacional, Évora 2003, 397-406
146. J. A. T. Barbosa, A. J. M. Ferreira, Os elementos de Ahmad e de Marguerre na
análise de cascas- o efeito da curvatura, VII Congresso Nacional de Mecânica
Aplicada e Computacional, Évora 2003, 851-860
147. F.J. Ferreira, M.A.P. Vaz, Rui Guedes, Jorge Justo, “Desenvolvimento de uma
montagem experimental para ensaios de tracção a elevadas taxas de deformação”,
VII Congresso de Mecânica Aplicada e Computacional, Évora, 14-16/04/2003
148. J. A. Simões, A. T. Marques, P. M. S. T. de Castro, J. Aston, ”O programa de
mestrado em Design Industrial e Projects de alunos”, Congresso Use(r)Design,
Centro Português de Design, Lisboa, 27-30/03/2003, Livro User(r), pp. 20, Lisboa
(in CD-ROM)
149. Simões, J. A., M. A. P. Vaz, ”Estudos de caracterização de diferentes tipologias de
interfaces osso-prótese”, XII Congresso de Mecânica Aplicada e Computacional, 14
a 16 de Abril de 2003, Évora, Universidade de Évora, J. I. Barbosa (Ed.), Vol. III,
pp. 1321-1330, 2003.
150. Piloto, P. A. G.; Mesquita, L.; Vila Real, P.; M. A. P. Vaz, “Encurvadura lateral
torsional de vigas I – Comparação entre EC#, BS5950, AS4100, e métodos
numéricos utilizando elementos finitos de casca”, VII Congresso de Mecânica
Aplicada e Computacional, Universidade de Évora, 14 a 16 de Abril, 2003.
151. Piloto, P. A. G.; Mesquita, L. M. R.; Ribeiro, P. J.; M. A. P. Vaz,; Vila Real, P. J.;
“Estudo Numérico e Experimental da encurvadura lateral torsional de perfis IPE
com e sem reforços transversais na alma”; VII Congresso de Mecânica Aplicada e
Computacional, Universidade de Évora, 14 a 16 de Abril, 2003.
152. Ferreira, F. J.; M. A. P. Vaz,; Guedes, R.; Justo, J.;”Desenvolvimento de uma
montagem experimental para ensaios de tracção a elevadas taxas de deformação”;
VII Congresso de Mecânica Aplicada e Computacional, Universidade de Évora, 14
a 16 de Abril, 2003.
153. Ribeiro, J.; M. A. P. Vaz,; Piloto, P. A. G.; “ Medição de campos de tensões
residuais”; VII Congresso de Mecânica Aplicada e Computacional, Universidade de
Évora, 14 a 16 de Abril, 2003.
332
154. Monteiro, J. M.; Santos, F. M. F.; M. A. P. Vaz,; “Os recentes avanços das técnicas
ópticas na Mecânica Experimental”; VII Congresso de Mecânica Aplicada e
Computacional, Universidade de Évora, 14 a 16 de Abril, 2003.
155. Luísa F. Bastos, João Manuel R. S. Tavares;”Técnicas de Optimização na
Determinação das Correspondências entre Objectos Deformáveis”; Artigo para o
VII Congresso de Mecânica Aplicada e Computacional; Universidade de Évora,
Abril de 2003.
156. Raquel Ramos Pinho, João Manuel R. S. Tavares;”Resolução da Equação de
Equilíbrio entre Imagens de Objectos Deformáveis”; Artigo para o VII Congresso
de Mecânica Aplicada e Computacional, Universidade de Évora, Abril de 2003.
157. Ana Reis, Pedro Teixeira, J. Ferreira Duarte, Abel Santos, A. Barata da Rocha,
A.A. Fernandes, "Conformação Plástica e Simulação Numérica de Tailored Welded
Blanks", Proceedings do VII Congresso de Mecânica Aplicada e Computacional,
pg. 289-300, Universidade de Évora, 14 a 16 de Abril de 2003.
158. Barbedo de Magalhães, Joaquim Fonseca, "Novos Desenvolvimentos no
Vazamento de Ligas de Alumínio em Coquilha com Basculamento", 12º Congresso
Nacional de Fundição, 5-7 de Novembro de 2003, Portugal.
159. Acácio Pereira, Elizabeth Silva, M. Teresa Vasconcelos, F. Jorge Lino, “Design,
Indústria e Tecnologia de Ponta. Um Caso de Estudo na Estratégia Educativa do
Design do Produto”, Tema 2: Valores, USER Design, Congresso Internacional, FIL,
Lisboa, 27 a 30 de Março de 2003.
160. M. Teresa Vasconcelos, P. V. Vasconcelos, F. Jorge Lino, Rui J. Neto, “As
Sinergias da Prototipagem Rápida e da Internet para um Design Optimizado”, Tema
2: Valores, USER Design, Congresso Internacional, FIL, Lisboa, 27 a 30 de Março
de 2003.
161. F. Jorge Lino, Rui J. Neto, Ricardo Paiva, Anabela Alves, “Potential of Rapid
Prototyping and Rapid Tooling in the Glasss Industry”, II International Materials
Symposium Materiais 2003 of Sociedade Portuguesa de Materiais, A Materials
Science Forum, Faculdade de Ciências e Tecnologia, Campus da Caparica, 14 a 16
de Abril de 2003.
162. A. Vieira, O. Frazão, C. Novo, J. A. Simões,“Sensores Bragg em fibra óptica para
substituir extensometros na determinação de exrtensões em problemas da
biomecânica”, 5º Encontro de Análise Experimental de Tensões e Mecânica
Experimental, Departamento de Engenharia Mecânica da Universidade de Coimbra,
Coimbra, 21-23/01/2004
163. R.M. Guedes, M.A. Vaz, P. Magalhães e F. Ferreira, Comportamento de materiais
compósitos solicitados a elevadas velocidades de deformação, métodos
computacionais em engenharia, Lisboa, 31 de Maio – 2 de Junho, 2004 ©
APMTAC, Portugal 2004
164. M. Gomes, R. Guedes e J. A. Simões, Caracterização mecânica do cimento ósseo
Subiton Quirúrgico RO para fixação de próteses de anca, Análise Experimental de
Tensões e da Mecânica Experimental - 5º Encontro Nacional, Departamento de
333
Engenharia Mecânica da Faculdade de Ciências e Tecnologia da Universidade de
Coimbra, 21 a 23 de Janeiro de 2004.
165. Luis Miguel Pereira Durão, João Manuel R. S. Tavares, António Torres Marques,
Manuel Freitas, “Caracterização de Danos de Maquinagem em Placas Compósitas”,
Congresso de Métodos Computacionais em Engenharia, Laboratório Nacional de
Engenharia Civil – Lisboa, 31 de Maio - 2 de Junho 2004
166. Raquel Ramos Pinho, João Manuel R. S. Tavares, “Simulação Física da
Transformação entre Objectos através da Resolução da Equação Dinâmica de
Equilíbrio em Imagens”, 5º Encontro Nacional de Análise Experimental de Tensões
e Mecânica Experimental, Universidade de Coimbra, Janeiro de 2004.
167. Cândida Pinto Coelho, João Manuel R. S. Tavares, “Introdução às Técnicas para
Levantamento de Forma Tridimensional sem Contacto”, 5º Encontro Nacional de
Análise Experimental de Tensões e Mecânica Experimental , Universidade de
Coimbra, Janeiro de 2004.
168. Cândida Pinto Coelho, João Manuel R. S. Tavares, “Calibração de Câmaras:
Métodos Pin Hole e Tsai”, 5º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, Universidade de Coimbra, Janeiro de 2004.
169. Luísa F. Bastos, João Manuel R. S. Tavares, “Um Sistema de Ferramentas de
Processamento e Análise de Imagens de Moiré: Apresentação”, 5º Encontro
Universidade de Coimbra, Janeiro de 2004.
170. Luísa F. Bastos, João Manuel R. S. Tavares, “Utilização de Modelação Física e
Técnicas de Optimização na Determinação de Correspondências entre Nodos de
Objectos no Espaço Modal”, 5º Encontro Nacional de Análise Experimental de
Tensões e Mecânica Experimental, Universidade de Coimbra, Janeiro de 2004.
171. F. Jorge Lino, P. Vasconcelos, Rui J. Neto, “Estudo da Injecção de Termoplásticos
em Moldes Produzidos em Compósitos de Base Epoxídica de Alta Temperatura”,
4as Jornadas Politécnicas de Engenharia, Instituto Superior de Engenharia do Porto,
Porto, 17 e 18 de Novembro de 2004.
Master Thesis
1.
Title: Caracterização da Flexibilidade de Cascas Cilindricas em Materiais
Compósitos
Course: Mestrado em Engenharia Mecânica pela Universidade do Porto
Student: José L. Leal
Supervisor: Francisco J. Queirós de Melo
Start: 1997
Conclusion: 1999
2.
Title: Estudo dos factores de influência na selecção das próteses de anca
Course: Mestrado em Engenharia Biomédica pela Universidade do Porto
Student: Maria de Lurdes Cordeiro Pinto
334
Supervisor: António Torres Marques
Start: 1997
Conclusion: 1999
3.
Title: Análise comparativa do comportamento de contactos elastohidrodinâmicos de
óleos e massas lubrificantes
Student: António Gonçalves Pereira
Supervisor: Luis Andrade Ferreira
Start: 1998
Conclusion: 1999
4.
Title: Fiabilidade de equipamentos na industria automóvel: Disponibilidade,
manutibilidade e gestão técnica de uma linha de produção
Course: Mestrado em Manutenção Industrial pela Universidade do Porto
Student: Amândio Manuel Soares da Costa Monteiro
Start: 1998
Conclusion: 1999
5
Title: Desenvolvimento de um Sistema de Interferometria Holográfica (ESPI) para
Análise de Estruturas sob Solicitações Estáticas e Dinâmicas
Student: Jaime Miranda Monteiro
Supervisor: Mário Augusto Pires Vaz
Start: 1998
Conclusion: 1999
6.
Title: Análise Dinâmica de Placas Compósitas Laminadas por Interferometria
Holográfica e Elementos Finitos
Course: Mestrado em Engenharia Mecânica pela Universidade de Coimbra
Student: Nuno Ricardo Maia Peixinho
Start: 1998
Conclusion: 1999
7.
Title: Caracterização das Tensões Geradas Dinâmicamente em Estruturas Ligeiras
para Veículos de Transporte
Student: Miguel Ângelo Nogueira da Costa Oliveira
Start: 1998
Conclusion: 1999
8.
Title: Utilização de Técnicas de Interferometria na Caracterização do Campo de
Tensões no Osso Esponjoso Devidas à Inserção de uma Prótese da Anca
Student: Josué Jorge Ludovico
335
Start: 1998
Conclusion: 1999
10. Title: Controlo do processo de moldação por transferência de resina (RTM)
Course: Mestrado em Engenharia de Polímeros pela Universidade do Minho
Student: Célia Maria Moreira Parente Novo
Start: 1999
Conclusion: 2000
11. Title: Influência dos agentes retardadores de chama no comportamento ao fogo dos
compostos de moldação em placa
Course: Mestrado em Engenharia de Polímeros pela Universidade do Minho
Student: João Alcino Ribeiro Gonçalves de Oliveira Rodrigues
Start: 1999
Conclusion: 2000
12. Title: TPM uma filosofia de futuro – Análise e implementação de TPM em unidade
industrial
Student: Paulo Manuel Barbosa da Fonseca Cardoso
Start: 1998
Conclusion: 2000
13. Title: Influência do comportamento dinâmico da máquina de ensaios nos resultados
de atrito e desgaste
Student: Arnaldo Manuel Guedes Pinto
Start: 1997
Conclusion: 2000
14. Title: Influência dos tratamentos térmicos específicos de um ADI sobre o seu
comportamento à fadiga de contacto
Student: António Paulo Cerqueira Duarte
Supervisor: Jorge Humberto Oliveira Seabra
Start: 1999
Conclusion: 2000
15. Title: Influência da contaminação de uma massa lubrificante sobre o desgaste de um
contacto EHD
Student: Rui Alberto Melo das Neves
Start: 1999
Conclusion: 2000
336
16. Title: Comportamento tribológico de polímeros alimentares contra aço inoxidável em
escorregamento não lubrificado
Student: Luís Miguel Soares da Costa Seabra
Start: 1999
Conclusion: 2000
17. Title: Metodologia de apoio à definição da estratégia de manutenção – Uma
aplicação da “Reliability Centered Maintenance”
Student: Nuno Miguel Fernandes de Oliveira e Silva
Start: 1999
Conclusion: 2000
18. Title: Fiabilidade de Equipamentos na Indústria Automóvel. Disponibilidade,
Manutibilidade e Gestão Técnica de uma Linha de Produção
Student: Amândio Manuel Soares da Costa Monteiro
Start: 1999
Conclusion: 2000
19. Title: Moldações Cerâmicas Compósitas
Course: Mestrado em Engenharia Mecânica Porto
Student: João da Rocha e Silva
Supervisor: Fernando Jorge Lino Alves
Start: 1998
Conclusion: 2000
20. Title: Fabrico de Peças Metálicas Utilizando Moldações Cerâmicas e Moldações em
Gesso
Course: Mestrado em Engenharia Mecânica Porto
Student: João Carlos de Oliveira Nunes
Start: 1998
Conclusion: 2000
21. Title: Simulação do comportamento de termoplásticos na fase de enchimento de
moldes de injecção
Student: Luísa Alexandra Rocha da Silva
Start: 2000
Conclusion: 2001
337
22. Title: Avaliação do comportamento tribológico de revestimentos superficiais em
engrenagens
Student: Rui Inácio Amaro
Start: 1999
Conclusion: 2001
23. Title: Estudo do Fluxo de Energia Vibratória em Placas e Vigas
Student: Hernâni Miguel Reis Lopes
Supervisor: J.F. Dias Rodrigues
Start: 1999
Conclusion: 2001
24. Title: Desenvolvimento de Célula Robotizada
Student João Pedro Barata da Rocha Falcão Carneiro
Supervisor: António Pessoa Magalhães
Start: 1999
Conclusion: 2001
25. Title: Modelação Numérica Por Elementos Finitos De Processos de Conformação
Plástica
Student Ana Reis
Supervisor: Abel Dias dos Santos
Start: 1999
Conclusion: 2001
26. Title: Técnicas Experimentais e Numéricas na Verificação da Integridade de Espiras
de Enrolamentos de Transformadores de Elevada Potência
Student: Paula Alexandra Dias Branco
Start: 2000
Conclusion: 2002
27. Title: Simulação e Validação Experimental do Comportamento Energético de uma
Caixa Transfer para Veículos de Tracção Integral
Student: Ramiro Martins
Start: 1999
Conclusion: 2002
338
28. Title: Crashworthiness in Composite Materials
Student: Silvestre Taveira de Pinho
Supervisor: Marcelo Ferreira de Moura
Start: 2000
Conclusion: 2002
29. Title: Estudo Comparativo de Técnicas de Aquisição de Forma para o Design e Redesign de Artefactos
Course: Mestrado em Design Industrial pela Universidade do Porto
Student: Marco António Gomes
Supervisor: João Manuel Tavares
Start: 2000
Conclusion: 2003
30. Title: Optimização da Determinação das Correspondências entre Objectos
Deformáveis no Espaço Modal
Course: Mestrado em Métodos Computacionais em Ciências e Engenharia pela
Universidade do Porto
Student: Maria Luísa Ferreira dos Santos Bastos
Start: 2000
Conclusion: 2003
31. Title: Desenvolvimento de um Sistema de Levantamento de Forma 3D usando Visão
por Computador
Student: Maria Cândida Felgueiras Seabra Pinto Coelho
Start: 2000
Conclusion: 2003
32. Title: Determinação do Campo de Deslocamentos a partir de Imagens de Objectos
Deformáveis
Student: Raquel Ramos Pinho
Start: 2000
Conclusion: 2003
33. Title: Modelização do Controlo Activo de Vibrações de Vigas com Sensores e
Actuadores Piezoeléctricos
Student: César Miguel de Almeida Vasques
Supervisor: José Dias Rodrigues
Start: 2001
Conclusion: 2003
339
34. Title: Mecânica da Fractura de Betões Poliméricos
Student: João Marciano Laredo Reis
Supervisor: António Mendes Ferreira
Start: 2001
Conclusion: 2003
35. Title: Análise RAMS de Sistemas de Combate a Incêndio em Edifícios Públicos
Student: José Augusto da Silva Sobral
Start: 2001
Conclusion: 2003
36. Title: Fiabilidade e Modo de Falha Crítico em Motores Volvo THD 100DB-Um
Caso Prático
Student: Manuel Cipriano Machado Enguiça
Start: 2001
Conclusion: 2003
37. Title: Terologia Aplicada aos Sistemas AVAC-Definição de Rotinas de Manutenção
na Perspectiva da Qualidade do Ar Interior
Student: João Luís Monteiro Ruivo Pedro
Start: 2001
Conclusion: 2003
38. Title: Análise RAMS de uma Instalação de Produção de Semicondutores
Student: Mário Joaquim Machado Oliveira
Start: 2001
Conclusion: 2003
1. Title: Técnicas de Processamento de Imagens Obtidas por Métodos Ópticos em
Análise Experimental de Tensão
Course: Doutoramento em Engenharia Mecânica pela Universidade do Porto
Student: José Augusto Gonçalves Chousal
Supervisor: J.F. Silva Gomes
Start: 1993
Conclusion: 1999
340
2.
Title: Influência do meio ambiente no comportamento ao dano de estruturas em
materiais compósitos
Course: Doutoramento em Engenharia Mecânica pela Universidade de Trás-osMontes e Alto Douro
Student: José Joaquim Lopes Morais
Start: 1993
Conclusion: 1999
3.
Title: Aplicação das técnicas de emissão acústica e radiografia na caracterização do
dano produzido por fluência em juntas de materiais compósitos sujeitas a diferentes
condições ambientais
Student: António Gonçalves Magalhães
Start: 1993
Conclusion: 1999
4.
Title: Reforço e reabilitação de estruturas de betão usando materiais compósitos de
CFRP
Course: Doutoramento em Engenharia Civil pela Universidade do Porto
Student: Luís Filipe Pereira Juvandes
Start: 1995
Conclusion: 1999
5.
Title: Estudo de Fenómenos Dinâmicos Transitórios Utilizando Técnicas
Pseudodinâmicas
Student: Joaquim Alexandre Oliveira Carneiro
Supervisor: Francisco J. Queirós de Melo
Start: 1996
Conclusion: 1999
6.
Title: Contribuições para a Análise Numérica e Experimental do Comportamento de
Juntas de Sobreposição Simples
Student: João Paulo Moreira Gonçalves
Supervisor: Marcelo Ferreira de Moura
Start: 1996
Conclusion: 2000
7. Title: Estrutura e comportamento tribológico de revestimentos duros e ultra-duros
executados no vácuo
Student: Francisco José Gomes da Silva
Supervisor: António Paulo Monteiro Baptista
341
Start: 1998
Conclusion: 2001
8.
Title: Reologia de um Fluido Lubrificante não-Newtoniano no Interior dum Contacto
Termoslastohidrodinâmico.
Student: Alexandre Gonçalves Sottomayor
Supervisor: Jorge Humberto Seabra
Start: 1994
Conclusion: 2002
9.
Title: Estrutura e comportamento tribológico de revestimentos duros e ultra-duros
executados no vácuo.
Student: Francisco José Gomes da Silva
Supervisor: António Paulo Monteiro Baptista
Start: 1998
Conclusion: 2002
10. Title Fabricação e Caracterização de Componentes Cerâmicos para Fundição.
Course: Doutoramento em Ciências e Engenharia dos Materiais Universidade de
Aveiro
Student: Marta Ilda Laranjeira Lopes de Oliveira
Start: 1998
Conclusion: 2002
11. Title: Caracterização Tribológica de um Ferro Nodular Austemperado em Ensaios
Disco-Disco e de Engrenagens FZG.
Student: Luís Leite MagalhãesSupervisor: Jorge Humberto Seabra
Start: 1995
Conclusion: 2003
12. Title: Shape and Vibration Control of Composite Structures with Piezoelectrics
Using Generic Algorithms
Student: Suzana da Mota Silva
Supervisor: José Fernando Dias Rodrigues
Start: 2000
Conclusion: 2003
13. Title: Estudo do Comportamento Dinâmico de Estruturas em Materiais Compósitos
Student: José Pedro Reina
Supervisor: António Torres Marques e José Fernando Dias Rodrigues
Start: 1994
Conclusion: 2003
342
14. Title: Efeito de Reparações nas Propriedades Mecânicas de Chapas de Veículos
Acidentados
Student: Henrique Pereira Fernandes
Start: 2001
Conclusion: 2003
15. Title: Caracterização Mecânica de Ligas de Alumínio. Análise do Efeito de
Recuperação Estática à Temperatura Ambiente
Student: Fábio Jorge Pereira Simões
Start: 2000
Conclusion: 2003
16. Title: Forming Limit Diagrams. Definition of Plastic Instability Criteria
Student: Camen Butuc
Supervisor: Augusto Barata da Rocha
Start: 1999
Conclusion: 2004
17. Title: Modelização de um Contacto Elastohidrodinâmico Linear Considerando o
Comportamento Viscoelástico-Plástico do Lubrificante e a Dissipação de Energia
Térmica no Contacto.
Student: Armando Vilaça Campos
Start: 1994
Conclusion: 2004
18. Title: Gripagem de Engrenagens FZG Lubrificadas com Óleos Base.
Student: Manuel Dores de Castro
Start: 1997
Conclusion: 2004
Technical Reports
1.
F. Jorge Lino Alves, “Estudo de Pinturas, Revestimentos e Componentes Cerâmicos
para Fundição de Ligas de Alumínio”, 1º Relatório Anual do Projecto FACER,
INEGI, 9 de Março de 2000.
2.
F. Jorge Lino Alves, Relatório Técnico de 1999 do Financiamento Plurianual de
Unidades de I&D da Fundação para a Ciência e Tecnologia, Unidade de Novas
Tecnologias e Processos Avançados de Produção, INEGI, Maio de 2000.
343
3.
F. Jorge Lino Alves, “Enhanced Design and Manufacturing of High Resistance
Casted Parts”, Relatório Final do Projecto DARCAST, INEGI, 17 de Novembro de
2000.
4.
B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample From A Hydraulic
Pump Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report (to
the company Hidromática), Porto, February 2001, 6 pages.
5.
B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Hydraulic
Press Machine Using Ferrometry And Analytical Ferrography, INEGI/CETRIB
report (to the company Arsopi Thermal), Porto, March 2001, 6 pages.
6.
B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Mechanic
Press Machine Using Ferrometry And Analytical Ferrography, INEGI/CETRIB
report (to the company Arsopi Thermal), Porto, March 2001, 6 pages.
7.
B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample From The Journal
Bearings Of An Alternator Using Ferrometry, Analytical Ferrography And Engler
Viscometry, INEGI/CETRIB report (to the company Efacec Energia), Porto, April
2002, 7 pages.
8.
B. Graça and J. Seabra, Flash And Combustion Point Determination Of A Oil From
A Thermal Exchanger, INEGI/CETRIB report (to the company Vicaima), Porto,
April 2001, 3 pages.
9.
B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample From A Hydraulic
Pump Using Ferrometry, Analytical Ferrography And Engler Viscometry,
INEGI/CETRIB report (to the company Efacec Energia), Porto, May 2001, 7 pages.
10. J. Seabra, Failure Analysis Of A Hydraulic Pump, INEGI/CETRIB report (to the
company LUSÁGUA, ETAR Maia), Oporto, July 2001, 4 pages.
11. B. Graça and J. Seabra, Flash Point Determination Of A Oil From A Thermal
Exchanger, INEGI/CETRIB report (to the company Vicaima), Porto, July 2001, 2
pages.
12. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Gearbox
Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report (to the
company Transmetro), Porto, November 2001, 8 pages.
13. B. Graça and J. Seabra, Lubricant Analysis Of Five Oil Samples From A Gearbox
Using Ferrometry, Analytical Ferrography And Oilview, INEGI/CETRIB report (to
the company Transmetro), Porto, November 2001, 5 pages.
14. B. Graça and J. Seabra, Lubricant Analysis Of Four Oil Samples From Barramentos
De Quatro Mesas Posicionadoras Using Ferrometry And Analytical Ferrography,
INEGI/CETRIB report (to the company MIIT), Porto, November 2001, 10 pages.
15. B. Graça and J. Seabra, Lubricant Analysis Of Oil Samples From Five Reduction
Gearboxes Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report
(to the company MIIT), Porto, November 2001, 11 pages.
344
16. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Compressor
company MIIT), Porto, December de 2001, 6 pages.
17. F. Jorge Lino Alves, Relatório Técnico de 2000 do Financiamento Plurianual de
Unidades de I&D da Fundação para a Ciência e Tecnologia, Unidade de Novas
Tecnologias e Processos Avançados de Produção, INEGI, Março de 2001.
18. F. Jorge Lino Alves, “Estudo de Pinturas, Revestimentos e Componentes Cerâmicos
para Fundição de Ligas de Alumínio”, Relatório Final do Projecto FACER, INEGI,
Setembro de 2001.
Sulzer Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report (to
the company MIIT), Porto, January 2002, 5 pages.
Sulzer Using Ferrometry, Analytical Ferrography And Flash Point, INEGI/CETRIB
report (to the company MIIT), Porto, January 2002, 5 pages.
21. R. Neves, B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From The
Journal Bearings Of An Alternator Using Ferrometry, Analytical Ferrography And
Engler Viscometry, INEGI/CETRIB report (to the company Efacec Energia), Porto,
May 2002, 7 pages.
22. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample From The Journal
Viscometry, INEGI/CETRIB report (to the company Efacec Energia), Porto, July
2002, 7 pages.
23. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From The Journal
Viscometry, INEGI/CETRIB report (to the company Efacec Energia), Porto,
October 2002, 6 pages.
24. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample Using Ferrometry
And Analytical Ferrography, INEGI/CETRIB report (to the company Portucel
Cacia), Porto, October 2002, 3 pages.
25. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample From A Injection
Machine Using Ferrometry, Analytical Ferrography And Engler Viscometry,
INEGI/CETRIB report (to the company Microplásticos S.A.), Porto, October 2002,
6 pages.
26. B. Graça and J. Seabra, Lubricant Analysis Of An Hydraulic Oil Sample From An
Injection Machine Using The Engler Viscometry And Water Content,
INEGI/CETRIB report (to the company Lear Corporation Efacec Energia), Porto,
December 2002, 3 pages.
27. F. Jorge Lino Alves, Relatório do Triénio 1999-2001, Plano para o Triénio 20022004, Relatório Financeiro de 2001 e Orçamento 2002, Unidade de Novas
345
Tecnologias e Processos Avançados de Produção da Fundação para a Ciência e
Tecnologia, INEGI, 15 de Maio de 2002.
28. F. Jorge Lino, Rui J. L. Neto, Ricardo Paiva “PPS2 Moldes Rápidos para Injecção –
Moldes em Resinas Monolíticas - Estudo e Desenvolvimento de Formulações de
Resinas Carregadas”, Relatório nº T20225IG01_01 do projecto FRF, 31 de
Dezembro de 2002.
29. F. Jorge Lino, Rui J. L. Neto, Ricardo Paiva, “PPS2 Moldes Rápidos para Injecção
– Moldes e Insertos Metálicos Fundidos – Cadeia de Produção por Investment
Casting e com Moldações Cerâmicas”, Relatório nº T20226IG02_01 do projecto
FRF, 31 de Dezembro de 2002.
30. Tavares, P.; Vaz, M. A. P.; “Realização de um procedimento para medição de
transmitância espectral em binóculos”; Cliente LEICA - Máquinas Fotográficas,
2002.
31. S. T. Pinho, P. P. Camanho, M. F. Moura and P. Areias , TECHNICAL NOTE –
‘Decohesion element with geometrical non-linearity – Validation’, University of
Porto, Faculty of Engineering Porto – Portugal, 2002
32. S. T. Pinho, P. P. Camanho and M. F. Moura, TECHNICAL NOTE – ‘Composite
tubes crush simutation using decohesion elements and damage mechanics - Model
Validation’, University of Porto, Faculty of Engineering Porto – Portugal, 2002
33. P. Vieira, S: T. Pinho, A. T. Marques, EUC-DOC-1220-0002-OGMA, ‘Tooling
concepts and infiltration tests’, INEGI, 2002
34. P. Vieira, S: T. Pinho, EUC-DOC-1220-0003-OGMA, ‘Tooling concepts,
infiltration tests and production of the Fin Box’, A. T. Marques, INEGI, 2002
35. P. Vieira, S: T. Pinho, A. T. Marques, EUC-DOC-1600-0002-OGMA, ‘Evaluation’,
INEGI, 2002
36. A T Marques, P. Nóvoa, P. H. Magalhães, Booklet "Repairability of Composites in
Transportation", CompositN: COMPOSIT Thematic Network – The future use of
composites in transport, INEGI, 2002
37. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From The Rolling
Bearings Of A Press Machine Using Ferrometry And Analytical Ferrography,
INEGI/CETRIB report (to the company Portucel Cacia), Porto, January 2003, 6
pages.
38. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From The Journal
Viscometry, INEGI/CETRIB report (to the company EEFACEC ENERGIA), Porto,
FEBRUARY 2003, 7 pages.
39. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Lubrication
System Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report (to
the company Transmetro), Porto, July 2003, 17 pages.
346
40. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Lubrication
System Using Ferrometry And Analytical Ferrography, INEGI/CETRIB report (to
the company Transmetro), Porto, August 2003, 7 pages.
41. B. Graça and J. Seabra, Lubricant Analysis Of An Oil Sample From A Gearbox
company Felino), Porto, December 2003, 7 pages.
42. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample (Elfolna Ds68) From
A Injection Machine Using Ferrometry, Analytical Ferrography And Engler
Viscometry, INEGI/CETRIB report (to the company Microplásticos S.A.), Porto,
43. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample (Shell Tellus S68)
From A Injection Machine Using Ferrometry, Analytical Ferrography And Engler
44. B. Graça anb J. Seabra, Lubricant Analysis Of An Oil Sample (Hydrelf Ds68) From
A Injection Machine Using Ferrometry, Analytical Ferrography And Engler
45. Ferreira, F. J. ; Monteiro, J.; Melo, F. J.; Vaz, M. A. P.;”Rebaixamento do gasoduto
DN250 no troço urbano da ribeira do Ameal em Águeda”; Cliente: ETERMAR,
2003.
46. Ferreira, F. J.; Vaz, M. A. P. ;” Peritagem às causas de ruína de uma “patesca” de
traineira”; Cliente: Tribunal Judicial da Comarca de Matosinhos, 2003.
47. Vaz, M. A. P.; “Peritagem a uma máquina industrial para lavagem de carros”;
Cliente: Varas Cíveis do Porto, 7ª Vara 1ª Secção, 2003.
48. Vaz, M. A. P.; “Peritagem às causas de capotamento de um “ampliroll” da empresa
RESIN”; Cliente: PERIAVA, 2003.
49. A. Barata da Rocha, F. Jorge Lino, “17 Anos de Actividade em Inovação e
Desenvolvimento Tecnológico”, INEGI, Janeiro de 2003.
50. A. Barata da Rocha, Fernando J. Lino Alves, Jorge Casais, Manuel Moura, José
Costa e Silva, “Uma Nova Dinâmica para o INEGI como Agente de Inovação e
Transferência de Tecnologia”, Dezembro de 2003.
51. F. Jorge Lino Alves, “Desenvolvimento de um Processo de Fabrico Rápido de
Ferramentas Baseado em Compósitos de Matriz Polimérica”, 1º Relatório Anual do
Projecto FARAF, INEGI, Janeiro de 2003.
52. Pedro Vasconcelos, Jorge Lino Alves, Rui Neto, “Moldes Protótipos em Resinas
Monolíticas, Caracterização Mecânica e Térmica dos Insertos, Aplicações
Industriais”, 1º Relatório do Projecto FRF, INEGI, 5 de Fevereiro de 2003.
53. F. Jorge Lino Alves, Relatório de 2002 e Plano de Actividades/Orçamento para o
Triénio 2003/2005, Unidade de Novas Tecnologias e Processos Avançados de
Produção da Fundação para a Ciência e Tecnologia, INEGI, Abril de 2003.
347
54. Rui Neto, Ricardo Paiva, “PPS2 Moldes Rápidos para Injecção – Aplicações
Industriais de Moldes Protótipo em Resina para Injecção de Plástico”, Relatório nº
T103225IG03_01 do projecto FRF, 30 de Junho de 2003.
55. Rui Neto, Ricardo Paiva, “PPS2 Moldes Rápidos para Injecção – Aplicações
Industriais de Moldes e Insertos Metálicos Fundidos”, Relatório nº T10326IG04_01
do projecto FRF, 30 de Junho de 2003.
56. Rui Neto, Ricardo Paiva, “PPS3 Ferramentas Rápidas para Fundição - Projecto de
Ferramentas Rápidas para Fundição”, Relatório nº T10331IG05_01 do projecto
FRF, 30 de Junho de 2003.
57. Rui Neto, Ricardo Paiva, “PPS3 Ferramentas Rápidas para Fundição - Ferramentas
Rápidas para Fundição em Areia”, Relatório nº T10332IG06_01 do projecto FRF,
30 de Junho de 2003.
58. Rui Neto, Ricardo Paiva, “PPS3 Ferramentas Rápidas para Fundição - Ferramentas
Rápidas para Injecção de Cera”, Relatório nº T10333IG07_01 do projecto FRF, 30
de Junho de 2003.
59. Rui Neto, Ricardo Paiva, “PPS3 Ferramentas Rápidas para Fundição – Ensaio dos
Moldes do Trinco”, Relatório nº T20325IG08_01 do projecto FRF, 31 de Dezembro
de 2003.
60. Rui Neto, Ricardo Paiva, “PPS3 Ferramentas Rápidas para Fundição – Ensaio de
Ferramentas de Fundição”, Relatório nº T20332IG09_01 do projecto FRF, 31 de
Dezembro de 2003.
61. F. Jorge Lino Alves, “Desenvolvimento de um Processo de Fabrico Rápido de
Ferramentas Baseado em Compósitos de Matriz Polimérica”, 2º Relatório Anual do
Projecto FARAF, INEGI, Fevereiro de 2004.
62. Vaz, M.A.P.; Ferreira, F.; Monteiro, J.;”Estudo das tensões geradas numa caldeira
de um esquentador”; Cliente: VULCANO, 2004
63. Monteiro, J.; Vaz, M. A. P.; “Medição dinâmica das tensões geradas num ponto
central de um pára-brisas de autocarro”; Cliente FCTUC/MARCOPOLO, 2004.
64. B. Graça and J. Seabra, Complete Lubricant Analysis of an Oil Sample from a
Thermal Exchanger, INEGI/CETRIB report (to the company Vicaima), Porto,
February 2004, 10 pages.
65. B. Graça and J. Seabra ,Lubricant Analysis of an Oil Sample From the Journal
Bearings of an Alternator Using Ferrometry, Analytical Ferrography and Engler
Viscometry, INEGI/CETRIB report (to the company EEFACEC ENERGIA), Porto,
July 2004, 7 pages.
66. B. Graça and J. Seabra, Complete Lubricant Analysis of an Oil Sample from a
Thermal Exchanger, INEGI/CETRIB report (to the company Vicaima), Porto,
September 2004, 8 pages.
348
1.
Simulation Pratique et Theorique des Engrenage (RENAULT/DYMAT)
2.
New Special Durable Precast Concretes Reinforced with Non-Metallic Rebars
(BRITE-EURAM)
3.
Development of a Durable, Environmentally Compatible, Fireproof and Water
Resistent Particle Board (CRAFT)
4.
ROSEC-Um Projecto Transnacional de Formação no Domínio dos Materiais
compósitos (European Commission-ADAPT)
5.
The Future Use of Composites in Transport (European Commission)
6.
Thermoplastic
Commission)
Composite
Infrastructure
Co-Operation Network
(European
As Project Partner:
1.
Pulsed Digital Holography and Shearography (BRITE-EURAM)
2.
Vibration Intensity Analysis (BRITE-EURAM)
3.
Reduction of Fluid Lubricant Use by Self-Lubricant Coatings (BRITE-EURAM)
4.
Intelligent Devices for and Control of Machining Processes (BRITE-EURAM)
5.
Development and Validation of a Reference Material for the Various Dynamic
Mechanical and Thermal Analysis (DMTA) Systems for Rubbers, Plastics and
Bituminem (European Commission-SMT)
6.
The Compilation of Field Measurements on Buried Pipes and their Comparison
with Estimated Design Results (European Commition)
7.
Resin Transfer Moulding (RTM) for Aerospace Structural Components (EUCLID)
8.
Design of GRP Flanges and Tests to Verify the design and to Determine LongTerm Properties of GRP Pipes (European Commission)
9.
Filament Wind of Reinforced Thermoplastics (european Commission-ICPME)
10. The European Virtual Tribology Institute (European Commission-GROWTH)
11. Emission Reduction from Engines and Transmissions Substituting Harmfull
Additives in Biolubricants by Triboreactive Materials (European CommissionGROWTH)
12. Towards Long-Life Bio-Lubricants Using Advanced Design and Monitoring Tools
(European Commission-GROWTH)
13. ‘Materiais Compósitos de Matriz Cimentosa Modificada’, Project BRITE, entidade
responsável Centre de Recherche de Pont-a-Mousson ‘Design of aluminium
349
structures and fatigue loading’, Project EUREKA 269-DASFAL, entidade
resposável TNO (NL)
14. ‘Mise en oeuvre et valorisation des Déchets Plastiques Mélangés issus de Collectes
et de tris publics privés et industriels’, Project REWARD - REWA-CT90.005
(TSTS), entidade responsável CRIF (B)
15. ‘Long life public service vehicle project study’, BRITE EURAM BREU-CT-910550 (RZJE) entidade responsável INEGI (P), sendo investigador responsável A A
Fernandes
16. ‘Innovative constituents for improving the compressive strength of long carbon
fibres/organic matrix composites’, Project BRITE EURAM - BREU CT 02.0314 ,
leader DAUSSALT AVIATION (F) ‘Development of knitted fabrics for
industrialization of high performance composites’, Project CRAFT CR/1561/91,
entidade responsável KU Leuven (B)
17. ‘Creep behaviour of advanced composites under LHC environment’, Project CERN
/P/FAE/1055/95, entidade responsável INEGI (P)
18. ‘ Inspection and Surveillance of Metallic Pressure Vessels During the Proof Test’,
CETIM (FR), Programa CRAFT
19. ‘The Compilation of Field Measurements on Buried Pipes and their Comparison
with Estimated Design Results’, Programa SMT
20. EUCLIDE RTM
21. Design of GRP flanges and tests to verify the Design and to determine Long-term
properties of GRP Pipes
22. Projecto SMT contrato CE Nº SMT4-CT96-2043, “The compilation of field
measurements on buried pipes and their comparison with estimated design results”,
coordenado por COMTEC (parceiros: Vidropol, Owens - Corning, Ethernit, UEL,
INEGI, LNEC), (A T Marques, J L S Esteves, A N V Costa), 1997-2001
23. Projecto EUCLID Contrato nº 99/RFP3.15.1/004, “Resin treansfer moulding
(RTM) for aerospace structural components”, (A T Marques, S T Pinho, A N V
Costa, P A Q S Vieira), 1999-2002
24. Coordenador EADS, parceiros: OGMA (INEGI, IST), DERA, NLR, CEAT, BAES,
EC, Baris, Fokker, HAI, Roketsan, TERMA, SONACA (Samtech)
25. Project SMT Contract. G6RD-CT2000-00259, “Design of GRP flanges and tests to
verify the design and to determine long-term properties of GRP pipes”, Contract.
G6RD-CT2000-00259, coordenado por COMTEC (parceiros: TNO, INEGI, KIWA,
VIDROPOL, UEL, EMPA, FUTURE PIPE, PIPE DEVELOPMENT, TU Clausthal, CETIM), (A J M Ferreira, A T Marques, A F Vieira, J Reis), 2000-2003
26. EC BRITE proposal BE 5094, contract BRPR CT97-0708, “PLASTICRETE
Highly durable precast special concrete reinforced with non metallic rebars”,
MAPREL, INEGI, LABEIN et al.; coordenador europeu do Project: A J M Ferreira
(com participação de M. C: S. Ribeiro, C: M. L. Tavares), 1998-28/02/2002
350
27. Project “Rem3D® Consortium” ,: Atofina, CEMEF, DOW Chemicals, Essilor, FCI,
Plastic Omnium, Schneider Electric, Snecma Moteurs e Transvalor 20012004(participação de L. R. Silva)
28. Project Eurolifeform “Probabilistic approch for predicting life cycle costs and
performance of buildings and civil infrastructure”e, financiamento da Comissão
Europeia, (participação de A. J. M. Ferreira), 2001-2004
29. .Project ESA “Inserts for CFRP structures”, em parceria com a MOTORÁVIA,
(coordenador P. P. Camanho, participação de A. T.Marques, P. T Castro, A. A.
Fernandes, R. M. Guedes, C. Tavares, P.Pimentel, P. Bandeira), 2002-2004
30. “CORONET – Thermoplastic Composites Infrastructure Co-operation Network”,
Rede Temática HPRI – CT – 2001 – 40029, coordenada pela Universidade de
Nottingham (parceiros: Bond Laminates, DLR, EPFL, EPL, Impala, INASMET,
INEGI, IVW, KEMA, Neckelmann, NetComposites, NTUA, NUID, RISO, SCL,
SCO, TU-Delft), 2001-2005
31. “COMPOSIT – The future use of composites in transport”, Rede Temática GTC 1 –
2001-43 014, coordenada por ARRC (parceiros:D’Appolonia, EADS, FIAT,
INEGI, IKV, KUL, Universidade de Newcastle, Universidade de Zaragoza,
SICOMP), 2001-2003
32. PIBRAC-Piezoelectric Brake Actuator (Europian Commision/6FP-Aeronautics)
National Projects:
As Leading Partner:
1. Development of a Shearography System for Non-Destructive Testing of Composite
Panels (MOD)
2.
Pseudodynamic Techniques for Structural Analysis (FCT/PRAXIS XXI)
3.
Applications of Digital holography to Experimental Mechanics (FCT/PRAXIS
XXI)
4.
Vibration Analisis by Pseudodynamic Techniques (FCT/PRAXIS XXI)
5.
Dynamic Characterization of Materials Under Impact (FCT/PRAXIS XXI)
6.
Behaviour of Composites of Polimeric Matrix Under Dynamic Loads
(FCT/PRAXIS XXI)
7.
Mecanismos de Lubrificação com Massa Lubrificante (FCT/PRAXIS XXI)
8.
Tratamentos Térmicos Específicos de um ADI (FCT/PRAXIS XXI)
9.
Sistema de Exploração e Manutenção do Metro do Porto (PEDIP)
10. Development of Alignement System for the CMS Tracker (FCT/CERN)
11. GEARSCUFF-Gear Scuffing,
(FCT/PRAXIS XXI)
New
Experimental
and
Num.
Methods
351
12. Técnicas de Reforço e de Reparação de Estruturas Primárias em Betão Armado por
Utilização de Materiais Compósitos (FCT/PRAXIS)
13. Desenvolvimento de Novas Tecnologias de Produção e Caracterização de
Compósitos de Matriz Polimérica (FCT/PRAXIS)
14. Monitorização e Controlo do Processo do RTM Através das Fibras Ópticas
(FCT/PRAXIS)
15. Development of New polymer Concretes (FCT)
16. Long Term Properties of Polymer Concretes (FCT/SAPIENS)
17. Monitorização da Integridade de Estruturas Compósitas Solicitadas a Cargas
Dinâmicas (FCT)
18. Desenvolvimento de Estruturas Híbridas Betão Polimérico/Compósitos (FCT)
19. Comportamento Mecânico de Compósitos de Matriz Polimérica Reforçados com
Fibras Naturais (FCT)
20. Analisis of Response and Damage of Polymer Matrix Composites to Dynamic
Loads (FCT/SAPIENS)
21. Design of Bonded Wood Joints (FCT/SAPIENS)
22. PRAXIS XXI /P/EME/12304/1998 - “Monitorização e controlo do processo RTM
através de fibras ópticas”, financiado pela FCT - Fundação para a Ciência e
Tecnologia no âmbito do Programa PRAXIS XXI, em parceria com o INESC,
sendo responsável científico o INEGI (A T Marques), 1998-2001
23. PRAXIS XXI /P/ECM/12277/1998 - “Development of new polymer concretes”,
financiado pela FCT - Fundação para a Ciência e Tecnologia no âmbito do
Programa PRAXIS XXI, em parceria com o LNEC e a Universidade Nova de
Lisboa, sendo responsável científico INEGI (A J M Ferreira), 1998-2001
24. “ENFITERE - “Enrolamento filamentar de termoplásticos reforçados”, liderado
pela VIDROPOL, sendo responsável científico o INEGI (A T Marques) e parceiro o
Departamento de Engenharia de Polímeros da Universidade do Minho, financiado
pelo programa ICPME, 2000-2001
25. POCTI/ECM/35955/1999, ‘Long term properties of polymer concretes’, sendo
investigador responsável pelo INEGI AJ M Ferreira, 2000-2003
26. Project SAPIENS POCTI/40201/EME/2001 “Mechanical Behaviour of Natural
Fibre Reinforced Plastics Composites”, sendo coordenador José Luís Esteves (com
participação de P. Vieira, C. Romão, S. Gonçalves), 2002-2004
27. POCTI/ECM/35955/1999, ‘Long term properties of polymer concretes’, sendo
investigador responsável pelo INEGI AJ M Ferreira (com participação de M. C: S.
Ribeiro, C: M. L. Tavares), 2000-2003
28. POCTI/EME/40048/2001, ‘Analysis of response and damage of polymer matrix
composites to dynamic loads’, (coordenador: R J S C de Miranda Guedes;
participação: M F Moura), 2002-2004
352
29. POCTI/EME/2001/42820, ‘Desenvolvimento de estruturas hibridas betão
polimérico/compósitos’, (coordenador: A J M Ferreira, com participação de M. C:
S. Ribeiro, C: M. L. Tavares), 2002-2004
30. Project SAPIENS 2001 POCTI/EME/40201/2001 “Comportamento mecânico de
compósitos de matriz polimérica reforçados com fibras naturais”, (coordenador: J L
Esteves, com participação de P Vieira), 2002-2004
31. Project SAPIENS POCTI/EME/43228/2001 “Impacto sobre placas de materiais
compósitos aramidicos com protecção de argamassa polimérica”, (coordenador A.
J. M. Ferreira), 2002-2004.
32. Project SAPIENS / 42032 / EME / 2001 - INTEGRIDADE, ‘Health monitoring of
composite structures under dynamic loads’, em parceria com o INESC,
(coordenador: A T Marques, com participação de A Nicolau, C P Novo, C Ramos,
M. Sousa), 2002-2004
33. Project ‘Experiência CMS – Desenvolvimento do Sistema de Alinhamento - MAB
– “Modules for the Alignment of the Barrels” integrado num Project internacional
com o CERN – “European Organisation for Nuclear Research”, (coordenado por A
N V Costa, com participação de J Justo, M Moreira)
34. Project “Monitorização de Deformações em Embarcações por Sensores de Fibra
Óptica”, parceria INEGI/INESC (participação de C. Novo, M. Sousa)
35. Project nº POCTI/EME/48574/2002, “ACÚSTICA-Detecção de Emissão Acústica
em Materiais Compósitos usando Sensores Fibras Ópticas Embebidas”,
(coordenador: A T Marques, com participação de A Nicolau ), em parceria com o
INESC-Porto, 2003-2005
36. Project SAPIENS-POCTI/EME/40048/2001 “Analysis of Response and Damage of
Polymer Matrix Composites to Dynamic Loads”, (coordenador R. J. S. M. Guedes,
participação de M. F. Moura), 2001-2004
37. Liderança de Project POCTI / EME / 45573 / 2002, intitulado “Design of Bonded
Wood Joints”, em parceria com a Universidade de Aveiro, a Universidade de Trásos-Montes (J. J. L.Morais) e o ISEP (A. G. Magalhães), (coordenação de M. F.
Moura), 2003-2006
38. Project SAPIENS POCTI/EME/47734/2002 “Prediction of long-term time life of
glass fibre reinforced plastic Pipes”, (coordenador R. J. S. M. Guedes, participação
de A. T. Marques, H. Q. Faria), 2003-2006
As Project Partner:
1.
Development of Pre-clinic Test for Hip Prostheses (FCT/PRAXIS XXI)
2.
Desenvolvimento de Juntas Homocinéticas p/ Ind. Automóvel (AI/PRAXIS)
3.
Sistema Integrado para Avaliação Objectiva de Imagens Médicas (FCT/PRAXIS
XXI)
4.
Diamond Coating of Ferrous Substrates (FCT)
353
5.
Comportamento e Dimensionamento de Estruturas de Betão Reforçadas com FRP,
Considerando o Efeitos de Envelhecimento (FCT/SAPIENS)
6.
Colaboração na Experiência CMS(CERN)-Desenvolvimento do Sistema de
Alinhamento (FCT/CERN)
7.
Tenacidade de Fractura Interlaminar de Materiais Compósitos (FCT)
8.
Impacto sobre Placas de Materiais Compósitos Aramídicos com Protecção de
Argamassa polimérica (FCT)
9.
Interlaminar Fracture Toughness of Composite Materials (FCT/SAPIENS)
10. PEM: Desenvolvimento de tecnologia PET para Mamografia (FCT/AI)
11. Project ‘Submarino – Concepção e fabrico de um submarino’, inserido no Project
para o Instituto de Sistemas e Robótica da Faculdade de Engenharia da
12. POCTI/EME/38731/2001, “Tenacidade de Fractura Interlaminar de Materiais
Compósitos”, (coordinator: A B Morais – U. Aveiro; participation: A G MagalhãesISEP; A T Marques; M F Moura – coordenador por parte do INEGI), 2002-2004
13. Project SAPIENS 2001 POCTI/1999/ECM/36059 “Behavior and Design of
Concrete Structures Strengthened with FRP Considering Ageing Effects”,
coordinator IST (Departamento de Engenharia Civil - J Appleton), partners
Universidade Nova de Lisboa (Departamento de Engenharia Civil), FEUP
(Departamento de Engenharia Civil), INEGI (coordinator J L Esteves, with the
participation of P Vieira, A T Marques), 2000-2004
Patents
1.
Processo de Enchimento com Rotação para Melhorar a Qualidade e o Rendimento
em Fundição". Patente de Inovação Nacional N.º 102887 requerida pelo INEGI em
17/12/02 e concedida por despacho de 2004.09.24. Inventor: António Pinto Barbedo
de Magalhães.
2.
Diamond Film Deposition For Steel Coating, Deposed by Aveiro University in the
frame of project FCT CTM/33992/99-00.
3.
J P L G Nunes, J F M G Silva, L A R Silva, P J P Novo, A T Marques, “Máquina
para Produção em Contínuo de Mechas de Fibras Pré-impregnadas com
Termoplástico em Pó”, Patente Portuguesa nº 102494, 14/07/2000. In 14th July
2001 the process for “Patente Internacional” was initiated.
Prototypes:
1.
Shearography Optical Head, M. Vaz, INEGI 2000.
2.
Rolling Bearing Support For The Four-Ball Machine, Garcia, Neves & Seabra,
INEGI 2000.
354
Protocols:
Organisation of Conferences and Seminars:
1.
3º ENCONTRO NACIONAL DE ANÁLISE EXPERIMENTAL DE TENSÕES E
MECÂNICA EXPERIMENTAL
Local: Porto, 24-26 March 1999
Number of Participants: 122
Organizing Committee:
J.F. Silva Gomes (FEUP, Chair of the Conference)
F.B. Branco (IST)
J.M. Catarino (LNEC)
J.M. Cirne (FCTUC)
M.L. Eusébio (LNEC)
Mário Santos (INETI)
M.A.P. Vaz (FEUP)
2.
INTERNATIONAL CONFERENCE ON INTEGRITY, RELIABILITY AND
FAILURE
Local: Porto, 19-22 July 1999
J.F. Silva Gomes (FEUP, Co-Chair)
Shaker A. Meguid (Univ. Toronto, Co-Chair)
M.A.P. Vaz (FEUP)
A.T. Marques (FEUP)
J.Dias Rodrigues (FEUP)
J.C.E. Stranart (Univ. Toronto)
A. Czekanski (Univ. Toronto)
N. El-Abbasi (Univ. Toronto)
3.
1º CONGRESSO LUSO-MOÇAMBICANO DE ENGENHARIA
Local: Maputo, Moçambique, 14-16 September 1999
J.F. Silva Gomes (FEUP, Chair)
Clito Felix Afonso (FEUP)
António Silva Matos (Univ. Ed. Mondlane)
Carlos Conceição António (FEUP)
António Castro Vide (INEGI)
4.
A SYMPOSIUM ON EXPERIMENTAL MECHANICS IN DESIGN (In
conjunction with the International Conference Mechanics and Materials in DesignM2D)
355
Local: Orlando, Florida (USA), 29-31 May 2000
Shaker A. Meguid (Univ. Toronto)
M.A.P. Vaz (FEUP)
5.
VII JORNADAS PORTUGUESAS DE TRIBOLOGIA
Local: Porto, 29-30 June 2000
Luis Andrade Ferreira (FEUP, Chair)
Jorge H. O. Seabra (FEUP)
A.P. Monteiro Baptista (FEUP)
A. Sousa Miranda (U.M.)
Amilcar Ramalho (FCTUC)
6.
SEMINÁRIO INTRODUÇÃO À MATERIALOGRAFIA
Local: Porto, 20-21 June 2001
Fernando Jorge Lino Alves (FEUP, Chair)
7.
2º CONGRESSO LUSO-MOÇAMBICANO DE ENGENHARIA
Local: Maputo, Moçambique, 4-6 September 2001
Clito Felix Afonso (FEUP)
António Castro Vide (INEGI)
8.
INTERNATIONAL CONFERENCE COMPOSITES IN CONSTRUCTIONCCC2001
Local: Porto, 10-12 Outubro 2001
J. Figueiras (FEUP, Co-Chair)
A.T. Marques (FEUP, Co-Chair)
L. Juvandes (FEUP)
R. Faria (FEUP)
A.J.M. Ferreira (FEUP)
J. Barros (U.M.)
J. Appleton (IST)
9.
4º ENCONTRO NACIONAL DE ANÁLISE EXPERIMENTAL DE TENSÕES E
Local: Bragança, 17-19 Outubro 2001
356
F.B. Branco (IST)
J.M. Catarino (LNEC)
J.M. Cirne (FCTUC)
M.A.P. Vaz (FEUP)
Paulo Piloto (IPB)
10. SEMINÁRIO SOBRE TECNOLOGIAS PARA O DESIGN DO SÉCULO XXI
Local: Viana do Castelo, 5 December 2001
Rui Neto (INEGI, Chair)
11. 1ST INTERNATIONAL CONFERENCE ON COMPOSITES FOR
CONSTRUCTION CCC2001 E 3RD INTERNATIONAL CONFERENCE ON
COMPOSITE MATERIALS FOR ARCHITECTURAL APPLICATIONS ARQUIMACOM 2001
Local: Porto, 10-12 October, 2001
Number of Participants: Organizing Committee:
A.J.M. Ferreira
António Torres Marques
12. INTERNATIONAL CONFERENCE ON POLYMER CONCRETES, MORTARS
AND ASPHALTS
Local: Porto/FEUP, 09-11 October, 2002
A.J.M. Ferreira
13. 12TH INTERNATIONAL SCIENTIFIC AND TECHNOLOGICAL
CONFERENCE ON TRANSPORT AND BUILDING INFRASTRUCTURE IN
CRISIS SITUATIONS
Local: Warszawa-Rynia, Poland, 2002
A.J.M. Ferreira
14. WORKSHOP ON REPAIRABILITY OF COMPOSITES IN
TRANSPORTATION, COMPOSIT THEMATIC NETWORK - THE FUTURE
USE OF COMPOSITES IN TRANSPORT
Local: Porto, 25 May, 2002
António Torres Marques
357
15. 3º CONGRESSO LUSO-MOÇAMBICANO DE ENGENHARIA
Local: Maputo, Moçambique, 19-21 August 2003
M.A.P. Vaz (FEUP)
16. 7th International Conference on Mechanical and Physical Behaviour of Materials
Under Dynamic Loading
Local: Porto/FEUP, 8-12 September 2003
J.M. Cirne (FCTUC, Chair)
J.F. Silva Gomes (FEUP)
Valdemar Fernandes (FCTUC)
M.A.P. Vaz (FEUP)
R. Pereira Leal (FCTUC)
Nuno Rilo (FCTUC)
17. 5º ENCONTRO NACIONAL DE ANÁLISE EXPERIMENTAL DE TENSÕES E
Local: Coimbra, 21-23 January 2004
J.F. Silva Gomes (FEUP)
F.B. Branco (IST)
A. Gonçalves (LNEC)
J.M. Cirne (FCTUC)
Paulo Piloto (IPB)
R. Pereira Leal (FCTUC)
Nuno Rilo (FCTUC)
18. WORKSHOP SOBRE TECNOLOGIAS INOVADORAS PARA O FABRICO
RÁPIDO DE FERRAMENTAS
Local: Lisbon, 22 June 2004
Rui Neto (INEGI)
358
Editorial Boards of Scientific Journals
1.
2.
3.
4.
International Journal of Mechanics of Materials (Prof. Joaquim Silva Gomes);
STRAIN, Journal of the British Society for Strain Measurements (Prof. Joaquim
Silva Gomes);
Mecânica Experimental (Prof. Joaquim Silva Gomes);
Archives of Civil and Mechanical Engineering, Polish Academy of Science (Prof.
Augusto Barata da Rocha)
359
ADAI-UC
Books:
1.
Book of Abstracts of the IV International Conference on Forest Fire Research Forest Fire Research & Wildland Fire Safety. Luso, Coimbra, ed. D. X. Viegas,
2002, 244 pp.
2.
CD of Proceedings of IV International Conference on Forest Fire Research - Forest
Fire Research & Wildland Fire Safety. Luso- Coimbra, ed. D. X. Viegas, 2002.
3.
VIEGAS D.X. (2004) Cercados pelo Fogo. Editorial Minerva, Coimbra, 283 pp.
4.
Book of Abstracts of the 9th International Conference on Air Distribution in Rooms
– ROOMVENT 2004, Coimbra, ed. M. C. Gameiro da Silva, 401 pp.
5.
CD of Proceedings of the 9th International Conference on Air Distribution in
Rooms – ROOMVENT 2004, Coimbra, ed. M. C. Gameiro da Silva, 211 papers.
Books Chapters:
1.
VIEGAS, D.X., “Innovations and Solutions in Fire Forecasting Issues”, Proc. Delfi
Symposium – International Symposium Forest Fires: Needs & Innovations, 18-19
November, 1999, pp. 164-173.
2.
FERREIRA, A.D.; A.C.M. Sousa and D.X., Viegas, “Numerical and Experimental
Study of the Wind Flow Around a Group of Low-Rise Pavilions” – Wind
Engineering into the 21st Century, Larsen, Larose & Livesey (eds), ISBN 90 5809
0590, pp. 1271-1276, 1999.
3.
SILVA, M.C.G., “Heating, Air-Conditioning and Ventilation in Buses”, contribution
included in Chap. 8 on “Surface Transportation”, ASHRAE Handbook 1999 HVAC Applications (written under invitation of the ASHRAE Commission for
Transports).
1.
ALCOBIA, C.J. and M.C.G. Silva, “Comfort Evaluation in Public Transportation
Buses” - SAE Special Publication SP-1426 Human Factors in Audio Systems,
Driving and Vehicle Seating, pp 59-65, 1999 (SAE Paper 1999-01-0894, presented
at the 1999 SAE International Congress and Exposition, March 1-4, Detroit).
2.
BRANCO, J. F.; C.T. Pinho and A. R. Figueiredo, “Heat Conduction in the Hollow
Sphere with a Power-Law Variation of the External Heat Transfer Coefficient”,
International Communications in Heat and Mass Transfer, vol 27, number 8, pp.
1067-1176, 2000.
360
3.
BRANCO, J.F., Pinho, C. and Figueiredo, A.R. (2002) First and Second-Law
Efficiencies in a New Thermodynamical Diagram, J. Non-Equilib. Thermodyn.,
2002, Vol.27, No 3, pp 239-256.
4.
CAPELA, C., Costa J.D., Ferreira J.M. and Raimundo A.M. (2003) Thermal Stress
Analysis in Particulate Composite Components. Strain – International Journal for
Strain Measurement. Vol. 39, No 2, pp. 49-56.
5.
CONCEIÇÃO, E.Z.E., M. C. G. Silva, J. André and D.X. Viegas, “A Computational
Model to Simulate the Thermal Behaviour of the Passengers Compartment of
Vehicles". SAE Paper 1999-01-0778, presented at the 1999 SAE International
Congress and Exposition, March 1-4, Detroit, USA. Selected for the SAE 1999
Transactions – Journal of Passenger Cars (ISBN 0-760-0697-X; 359 papers, 3490
pages).
6.
COSTA V.A.F., Oliveira L.A., Baliga B.R. and Sousa A.C.M. (2004) Simulation of
Coupled Flows in Adjacent Porous and Open Domains using a Control-Volume
Finite Element Method. Numerical Heat Transfer, A, 2004, vol. 45, n.º 7, pp. 675698.
7.
COSTA, J. J.; L.A. Oliveira and D. Blay, “Test of several versions for the k- type
turbulence modeling of internal mixed convection flows”, International Journal of
Heat and Mass Transfer 42; 4391-4409, 1999.
8.
COSTA, J. J.; L.A. Oliveira and D. Blay, “Turbulent airflow in a room with a two-jet
heating-ventilation system – A numerical parametric study”, Energy and Buildings,
Vol. 32, Nº 3, 327-343, 2000.
9.
CRUZ, M.G., Alexander, M.E., and Wakimoto, R.H. (2003) Assessing canopy fuel
stratum characteristics in crown fire prone fuel types of western North America. Int.
J. Wildland Fire. 12:39-50
10. CRUZ, M.G., Alexander, M.E., and Wakimoto, R.H. (2004) Modeling the rate of
spread of crown fires in conifer forest stands. Canadian Journal Forest Research,
34 (In press)
11. CRUZ, M.G., Wakimoto, R.H., and Alexander, M.E. (2004) Modeling the likelihood
of crown fire occurrence in conifer forest stands. Forest Science, 50 (In press)
12. CRUZ, MG, Alexander ME and Wakimoto RH. (2003) Assessing the probability of
crown fire initiation based on fire danger indices. Forestry Chronicle. Vol. 79(5),
pp. 976-983.
13. FERREIRA, A.D. and Sousa A.C.M. (2002) The RNG turbulence closure:
Application and Revisited. Performance assessment. WSEAS Transactions on
Systems, Issue 2, Vol. 1: 165-170.
14. FERREIRA, A.D. and Vaz P.A. (2004) Wind tunnel study of coal dust release from
train wagons. Journal of Wind Engineering and Industrial Aerodynamics. Vol. 92,
pp. 565-577, 2004.
361
15. FERREIRA, A.D., Sousa A.C.M. and Viegas D.X. (2002) Prediction of building
interference effects on pedestrian level comfort. Journal of Wind Engineering and
Industrial Aerodynamics 90: 305-319.
16. FERREIRA, A.D.; Sousa A.C.M. and D.X. Viegas, “Simulation of ThreeDimensional, Turbulent Flow Around Several Pavilions Separated by Passageways”
– Front-page of Journal of Visualization, Vol. 2, n.º 1, p. 6, 1999.
17. FIGUEIREDO, AR and Costa JJ (2004) Experimental analysis of the use of wet
porous media for thermal protection against high intensity heat fluxes”.
International Journal of Heat and Mass Transfer. 47 (2004) 11-19.
18. FREIRE, F., Ferrão, P., Reis, C. and Thore, S., “Life Cycle Activity Analysis
Applied to the Portuguese Used Tire Market". Journal of Passenger Car Mechanical Systems. SAE Transactions, vol. 109, n. 6, pp. 1980-1988, 2000 ("Best
Paper Award" recipient from the Total Life Cycle Conference 2000).
19. FREIRE, F.; A.R. Figueiredo and P. Ferrão, “Modelling High-Temperature ThinLayer Drying Kinectis of Olive Bagasse”, Journal of Agricultural Engineering
Research, 78 (4), 397-406, 2001.
20. FREIRE, F.; A.R. Figueiredo and P. Ferrão, “Thermal Analysis and Drying Kinectics
of Olive Bagasse”, Drying Technology, 17(4&5), 895-907, 1999.
21. FREIRE, F.; S. Thore and P. Ferrão, “Life Cycle Activity Analysis: Logistics and
Environmental Policies for Bottled Water in Portugal”. OR Spektrum. Special issue:
“Operations Research and Environmental Management”, Vol. 23 (1), pp. 159-182,
2001.
22. GOMES, A.; A. Gomes Martins and A.R. Figueiredo, “Simulation-based Assessment
of Electric Load Management Programs”, Int. J. Energy Res., 23, 169-181, 1999.
23. LOPES, A.M.G (2003) WindStation - A software for the simulation of atmospheric
flows over complex topography. Environmental Modelling & Software. Vol.18,
N.1, pp. 81-86.
24. LOPES, A.M.G (2004) Implementation of the Hardy-Cross Method for the Solution
of Piping Networks. Computer Applications in Engineering Education, (accepted
for publication).
25. LOPES, A.M.G, Cruz, M.G. and Viegas, D.X. (2002) FireStation - An integrated
software system for the numerical simulation of wind field and fire spread on
complex topography. Environmental Modelling & Software, Vol.17, N.3, pp. 269285.
26. LOPES, A.M.G. and P. Carvalheira, “Numerical Aerodynamic Optimization of a
Low Fuel Consumption Car Body Shape”, SAE Technical Paper 2000-01-0492
(SAE2000 World Congress, 6-9 March 2000).
27. MARTINHO N.A.G., Silva M.C.G., Ramos J.A.E. (2004) Evaluation of Thermal
Comfort in a Vehicle Cabin. Proc. Instn Mech. Engrs Vol 218 Part D: J.
Automobile Engineering (2004), pp 159-165
362
28. MARTINS, A. Gomes; A.R. Figueiredo; D. Coelho and J. Sousa, “Energy Planning
in Urban Historical Centres - A methodological approach with a case-study”,
Energy Policy, vol 26, nº15, pp.1153-1165, Feb. 1999.
29. MENDES J.C.A.F., Silva M.C.G. (2004) On the use of porous materials to simulate
evaporation in the human sweating process. European Journal of Applied
Physiology 92: pp 654-657. Also presented in 5th International Meeting on Thermal
Manikin and Modelling, Strasbourg, 29-30 September 2003
30. MENDES, J.C.A.F and Silva, M.C.G. (2004) Development of a new thermal
environment meter responding both to sensible and latent heat fluxes. Institute of
Physics Publishing. Measurement Science and Technology 15 (2004) 839-847.
31. MENDES, R., Campos, J, Plaksin, I and Ribeiro, J. (2004) Divergent Detonation
Wave Process in PBX Based on RDX. Propellants, Explosives and Pyrotechnics,
29, (3) pp. 146-149, 2004.
32. OLIM, A.M., Riethmuller, M.L. and Silva M.C.G. (2002) Flowfield
Characterization of a Low Velocity Heated Sphere Anemometer. Experiments in
Fluids 32, 645-651.
33. OLIVEIRA, L.A., Costa V.F. and Baliga B.R. (2002) A Lagrangian-Eulerian model
of particle dispersion in a turbulent plane mixing layer. Int. J. Numer. Meth. Fluids,
Vol. 40, pp. 639-653.
34. PAIVA, J.M., Pinho, C. and Figueiredo, A.R. (2002). First and Second-Law
Efficiencies in a New Thermodynamical Diagram. J. Non-Equilib. Thermodyn.,
Vol.27, No 3, pp 239-256.
35. PAIVA, J.M., Pinho, C. and Figueiredo, A.R. (2004) The influence of the distributor
plate on the bottom zone of a fluidized bed approaching the transition from
bubbling to turbulent fluidization, Institution of Chemical Engineers, Trans
IChemE, Part A, January 2004, Chemical Engineering Research and Design,
82(A1): 25-33.
36. PLAKSIN, I., Campos, J, Ribeiro, J., Mendes, R., Direito, J, Braga, D. and
Pruemmer, R. (2003) Novelties in physics of explosives welding and powder
compaction. J. Phys. IV, 110, pp. 797-802.
37. PLAKSIN, I., Campos, J, Ribeiro, J., Mendes, R.and Góis, J. (2002) Detonation study
of PBX micro-samples. Khmicheskaya Fizika, Nº 8, vol 21, pp. 99-109
38. QUINTELA, D.A., Gaspar, A.R. and Borges, C.P. (2003). Analysis of Sensible Heat
Exchanges from a Thermal Manikin. European Journal of Applied Physiology 92:
pp 663-668
39. RAIMUNDO, A., Figueiredo A.R. and Oliveira L.A. (2002) Heat Transfer
Measurements in a Rotor-Stator System with Three-Dimensional NonAxisymmetric Conditions. Experimental Thermal and Fluid Science Journal, 27,
47-58.
363
40. RAIMUNDO, A.M., Oliveira L.A., Figueiredo A.R. (2002) Numerical simulation and
experimental validation of heat transfer within rotating flows for three-dimensional
non-axisymmetric, turbulent conditions. Int. J. Num. Meth. Fluids, 40:821-840.
41. RIBEIRO, J., Campos, J, Mendes, R. and Plaksin, I. (2003) Wide range shock wave
data for polyester syntactic foams. J. Phys. IV, 110, pp. 785-790.
42. RIBEIRO, J., Campos, J, Plaksin, I. and Mendes, R. (2002) Microscopic aspects of
the shock propagation process in epoxy syntatic foams. Khmicheskaya Fizika, Nº 8,
vol 21, pp. 25-30.
43. RIBEIRO, J., Campos, J, Plaksin, I., Mendes, R. and Góis, J.C. (2003) Assymetric
collapse and micro-jetting in shock wave propagation in porous materials. J. Phys.
IV, 110, pp. 887-892.
44. SILVA, M.C.G. (2002) Measurements of Comfort in Vehicles. Institute of Physics
Publishing, Measurements Science and Technology 13, R41-R60. Selected by the
Editorial Board as a Featured Article to the Journal web page between July and
October 2002.
45. SILVA, M.C.G., Mateus M.L.O.S. and Cruz J.M.S. (2003) Teaching the Laws of
Kinematics using a Radio-Controlled Scale Car. World Transactions on
Engineering Education, Vol. 2, Nº 1.
46. SILVA, M.C.G., Pereira C.A.C. and Cruz J.M.S. (2003) On the Use of a Linear
Interpolation method in the Measurement Procedure of a Seven-Hole Pressure
Probe. Experimental and Thermal Fluid Science, Vol. 23, pp. 1-8.
47. STOCKS, B.J., M.E. Alexander, B.M. Wotton, C.N. Stefner, M.D. Flannigan, S.W.
Taylor, N. Lavoie, J.A. Mason, G.R. Hartley, M.E. Maffey, G.N. Dalrymple, T.W.
Blake, M.G. Cruz, and Lanoville R.A. (2004) Crown fire behavior in northern jack
pine/black spruce forests: the International Crown Fire Modelling Experiment. Can.
J. For. Res. 34: Accepted.
48. VAZ, G.C., André, J.C.S. and Viegas, D.X. (2004) Estimation of the radiation
extinction coefficient of natural fuel beds. Int. J. Wildland Fire (2004) 13: 65-71.
49. VAZ, G.C., André, J.C.S. and Viegas, D.X. (2004) Fire spread model for a linear
front in a horizontal solid porous fuel bed in still air. Comb. Sci. Tech. (2004)
176:135-182.
50. VIEGAS, D.X. (2002) Fire line rotation as a mechanism for fire spread on a uniform
slope. International Journal of Wildland Fire 11(1): 11-23.
51. VIEGAS, D.X. and L.S. Maricato, “Two Firefighters Killed in a Wildfire in Northern
Portugal”, Wildfire 2000, Vol. 9, nº1, Janeiro 2000.
52. VIEGAS, D.X.; G. Bovio, A. Ferreira; A. Nosenzo and B. Sol, “Comparative Study
of Various Methods of Fire Danger Evaluation in Southern Europe”. International
Journal Wildland Fire 9(4): 235-246,1999.
53. VIEGAS, D.X.; J. Piñol, M.T. Viegas and R. Ogaya, “Estimating live fine fuels
moisture content using meteorologically-based indices”, International Journal of
Wildland Fire 10(2): 223-240, 2001.
364
54. VIEGAS, DX (2004) On the existence of a steady-state regime for slope and wind
driven fire. Int. J. Wildland Fire. 13(1): 101-117.
55. VIEGAS, DX (2004) Slope and Wind Effects on Fire Propagation. Int. J. Wildland
Fire. 13(2): 143-156.
56. VIEGAS, DX and Pita, LP. (2004) Fire Spread in Canyons. Int. J. Wildland Fire.
(Accepted for publication).
57. Viegas DX, 2004. A Mathematical Model for Forest Fires Blow-up. Combustion
Science and Technology. (Aceite para publicação).
58. Piñol J, Beven K, and Viegas DX, 2004. Modelling the effect of fire-exclusion and
prescribed fire on wildfire size in Mediterranean ecosystems. Ecological Modelling.
(Aceite para publicação).
Papers in National Journals:
1.
ALCOBIA, C.J.O., Mateus M.L.O., Janicas N.J. and Silva M.C.G. (2003) Sistema de
Aquisição e Análise de Vibrações para Avaliação do Conforto no Interior de
Veículos. Mecânica Experimental, revista da APAET – Associação Portuguesa de
Análise Experimental de Tensões, nº 9.
2.
ANDRÉ, J. and J.C. Góis, “Métodos de demolição de edifícios (1ª parte)”, Detónica,
Vol. VIII, nº 31, Apr./Jun.01, ISSN 0872-4792.
3.
ANDRÉ, J. and J.C. Góis, “Métodos de demolição de edifícios (2ª parte”), Detónica,
Vol. VIII, nº 32, Jul./Set.01, ISSN 0872-4792.
4.
ANDRÉ, J.C.S. and D. X. Viegas, “Modelos de propagação de fogos florestais:
estado-da-arte para utilizadores – Parte I: Introdução e modelos locais”. Silva
Lusitana 9 (2): 237-265, Dez 2001.
5.
CHAVES, F., Góis J.(2002) Caracterização térmica da mistura RDX/HTPB (85/15) e
seus componentes. Detónica – Boletim da Associação Portuguesa de Estudos e
Engenharia de Explosivos, Vol. XX, Nº 33/34, Out.01/Mar.02, pp. 12 - 21, ISSN
0872-4792.
6.
COSTA, J.J. and L.A. Oliveira, “Vedação Aerodinâmica por Cortina de Ar – Estudo
Numérico”, Climatização - Revista de Aquecimento, Ar Condicionado, Ventilação e
Energia, n.º 15 – ano III, May/June 2001, pp. 30-38.
7.
CRUZ, MG and D.X. Viegas, “Caracterização do comportamento do fogo em
complexos combustíveis comuns na região Centro de Portugal”. Silva Lusitana,
Vol. 9(1): 13-34, 2001.
8.
GÓIS, J. C., Campos, J., Plaksin, I., Ribeiro and J., Mendes, R. (2003) A influência
de heterogeneidades na detonação de altos explosivos. Detónica – Boletim da
Associação Portuguesa de Estudos e Engenharia de Explosivos, ISSN 0872-4792,
Vol. XII, Nº 38, Jan03/Mar.03, pp. 8 – 17.
365
9.
LOPES, A.M.G.; A.C.M Sousa and D.X Viegas, “GRID3D – Um Código para a
Geração Numérica de Malhas Generalizadas Estruturadas”, Ingenium, N. 56, pp.7580, Março, 2001.
10. NETO, L.P. , Silva M.C.G. (2004) Utilização da Termografia de Infra-vermelhos na
Avaliação do Desempenho de Cortinas de Ar. Revista Climatizaçãonº 35, Ano IV,
Setembr/Outubro 2004, pp. 46-54
11. OLIVEIRA, A.V., Gaspar, A.R. and Quintela A. (2003) Condições de Trabalho na
Indústria Cerâmica. Aspectos da Exposição ao Calor. Revista Kéramica,
Associação Portuguesa da Indústria da Cerâmica, Ano XXIX, nº 262, Novembro de
2003, pp. 75-84.
12. OLIVEIRA, L.A. (2004) Magister (já não) dixit! Rua Larga (Revista da Reitoria da
Universidade de Coimbra), nº 4, 2004, pp. 48, 49
13. PIRES, P., Gaspar, A.R. and Quintela D.A. (2003) Desempoeiramento de Locais de
Trabalho na Indústria Cerâmica. Revista Kéramica, Associação Portuguesa da
Indústria da Cerâmica, Ano XXIX, nº 262, Novembro de 2003, pp. 30-39.
14. SILVA, M.C. Gameiro, “Duas Voltas à Pista no Carro Ciência Viva”, Gazeta da
Física, Revista da Sociedade Portuguesa de Física, Volume 24, nº 2, pp 8-15,
April/June 2001.
15. SILVA, M.C.G.; L.P. Neto; G.V. Brites, “Vedação aerodinâmica por cortina de ar–
Ensaios experimentais”, Climatização, nº17, Ano III, Sept/Oct 2001, pp. 34-42,
(also Proc. I Jornadas Técnicas de Primavera da EFRIARC, ISEP, Porto, March
23-24, 2001.
16. VAZ, G.C., André, J.C.S. and Viegas, D.X. (2003) Modelos de propagação de
frentes de fogo florestal. ISEC em Revista (ISSN 1645-5622), 1: 50-54.
17. VIEGAS DX, Reis RM, Cruz MG and Viegas MT. (2004) Calibração do Sistema
Canadiano de Perigo de Incêndio para aplicação em Portugal. Revista Silva
Lusitana. Vol. 12, nº1, Junho 2004
18. VIEGAS, D.X. (2003) Ensaios de propagação do fogo. Revista Floresta e Ambiente,
Nº 61. Abril/Junho 2003.
19. VIEGAS, D.X. (2003) Indexação do perigo de incêndio florestal. Revista Ambiente
21. Sociedade e Desenvolvimento. N. 13, Ano II, Dezembro 2003.
20. VIEGAS, D.X. (2004) Investigação Científica e Investigação Judicial no Âmbito dos
Incêndios Florestais. Polícia e Justiça. Revista do Instituto Superior de Polícia
Judiciária e Ciências Criminais. III Série. Nº3. Jan-Jun 2004.
1.
ANDRÉ, J. C. S.; M. L. O. S. Mateus and M.C.G. Silva, “Cálculo do Isolamento
Acústico de Paredes Compostas: Revisão e Generalização do Modelo de London”
(7 pp.) – XXXII Congresso Nacional de Acústica, Encontro Ibérico de Acústica,
Logroño, La Rioja, Spain, October 17-19, 2001.
366
2.
BLASKOVICH, T., Baliga, B.R. and Oliveira, L.A. (2002) Particle Tracking in
Laminar Flow of Molten Aluminum in Straight, Constant Cross-Section Ducts
Subjected to Steady, Uniform Electronic and Magnetic Fields. Proceedings of
FEDSM2002: 2002 Joint ASME/European Fluids Engineering Division Summer
Meeting, pp. 1-10. Montreal, Quebec, Canadá, 14 a 19 de Julho de 2002.
3.
BORGES, C.P.; Brites, G.N.; Gaspar, A.R.; Quintela, D.A and Costa J.J. (2002)
Analysis of Thermal Plumes Generated by a Seated Person, a Thermal Manikin and
a Dummy. ROOMVENT 2002 – 8th International Conference on Air Distribution in
Rooms, Copenhagen-Denmark, 8-11 September 2002.
4.
BRANCO, J.F. and J.C.S. André, “Teaching multiple pipe system problems: an
alternative calculation procedure”. Proc. ASME 2000 Fluids Eng. Div. Summer
Meeting FEDSM2000-11163: 1-6, Boston, Mass., USA, June 11-15, 2000.
5.
CABALLERO, D., Xanthopoulos, G., Viegas, D.X., Bovio, G. and Macé, P. (2002)
Role of Internet in the decision-making sequence for wildland fire management in
Europe: the E-FIS service. In: Proceedings of the 4th International Conference on
Forest Fire Research and Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal,
November, 18-23, Millpress Science Publishers, Rotterdam, Netherlands. (Oral
presentation).
6.
CABRITA, A.M. and D.A. Quintela, “Estratificação Térmica de um Túnel
Aerodinâmico de Baixas Velocidades”, 1º Congresso Luso-Moçambicano de
Engenharia, Maputo, Mozambique, September 14-16, 1999.
7.
CAMPOS, J., Duncombe, R., Erkol, S., van Gool, J. Griffiths, T., Koç, S., Mendes,
P., Mendes, R., Prinse, W., Tanrikulu, S., Tinaztere, T., Tohumçu, M., Unal I. and
Wasko M. (2002) Explosive initiation by micro slapper. Proceedings of the 33rd
International Annual Conference of ICT, Germany 2002, pp. 28-1, 28-10.
8.
CAMPOS, J., Plaksin I., Direito J., Braga D. and Coffey C.S. (2003) Effect of Shear
Stress in Shock Initiation of PBX. Proceedings of the Conference of the American
Physical Society – Topical Group on Shock Compression of Condensed Matter, 20
– 25 Julho, Portland, E.U.A. (em publicação).
9.
CAMPOS, J.; A. Portugal; I. Plaksin; J. Gois; L. Durães; R. Mendes, P. Simões, and
J. Ribeiro, (2001), “Energetic Materials-Models, Micro measurements and Results”,
NATO Advanced Research Workshop - Defense Industries: Science and Technology
Related Security-Impact of Conventional Munition on Environment and Population,
Porto, Portugal, October 29-31.
10. CAMPOS, J.; A. Portugal; J. Morgado; L. Durães and J.C. Góis, (2001),
“Propriedades da combustão da termite Fe2O3/Al com aditivos da base NA”. CD
ROM - 4º Encontro de Materiais e Química, Rio de Janeiro, Brazil, November 1214.
11. CHAVES, F., Góis, J.C. (2003) Comparing a single and a 3-steps kinetic model for
simulation of cook-off process of a PBX based on RDX. Proceedings of the 34th
International Annual Conference of ICT, Karlsruhe, Germany, 25 –27 Junho.
367
12. CHAVES, F., Góis, J.C. (2003) Measurement of Thermal Decomposition and
Validation of Kinetic Model to Describing the Cook-off of PBX RH8515.
Proceedings of the 19th International Colloquium on the Dynamics of Explosives
and Reactive Systems, 27 Jul. –1 Ago., Hakone, Japão.
13. COELHO, J.A. and Silva M.C.G. (2002) Convection Coefficients for the Human
Body determined with a Thermal Mannequin. Proc. Eighth International
Conference on Air Distribution in Rooms ROOMVENT 2002, Copenhaga, 8-11
Setembro 2002.
14. CONCEIÇÃO, E Z.E. and Lúcio M.M J.R. , “Numerical and Subjective Responses of
Human Thermal Sensation”, Sixth Portuguese Conference on Biomedical
Engineering "BioEng'2001", Faro, 11-12 June 2001.
15. CONCEIÇÃO, E.Z.E., “Evaluation of Thermal Comfort and Local Discomfort
Conditions Using the Numerical Modelling of the Human and Clothing Thermal
System”, RoomVent´2000 - 7th International Conference on Air Distribution in
Rooms, Reading University, UK, 9-12 June 2000.
16. CONCEIÇÃO, E.Z.E., “Avaliação de Condições de Conforto Térmico: Simulação
Numérica do Sistema Térmico do Corpo Humano e do Vestuário”, V Ibero and
Inter-American Air Conditioning and Refrigeration Congress "CIAR'99", Lisboa,
14-16 October, 1999.
17. CONCEIÇÃO, E.Z.E., “Dimensionamento de Sistemas de Aquecimento, Ventilação e
Ar Condicionado Eficientes Utilizados em Edifícios em Condições de Regime
Transitório”, I Jornadas Técnicas de Primavera da EFRIARC, Porto, 23 March
2001.
18. CONCEIÇÃO, E.Z.E., “Multinodal Models of Vehicles Thermal Behaviour and
Passenger Thermal Response”, 7th International Conference "Florence ATA 2001 The Role of Experimentation in the Automotive Product Development Process",
Florence, Italy, 23-25 May 2001.
19. CONCEIÇÃO, E.Z.E., “Numerical Modelling of Human Body Thermal Response:
stydy of hand thermal behaviour in transient conditions”, Fifth Portuguese
Conference on Biomedical Engineering, BioEng'2000, Coimbra, 26-27 May, 2000.
20. CONCEIÇÃO, E.Z.E., “Previsão das Condições de Conforto Térmico em
Compartimentos de Edifícios Sujeitos a Radiação Solar”, IX Congresso Ibérico de
Energia Solar, Cordoba, Spain, 27-29 March, 2000.
21. CONCEIÇÃO, E.Z.E., “Simulation of the Static and Dynamic Responses of the Cold
and Warm Thermoreceptors”, Fifth Portuguese Conference on Biomedical
Engineering, BioEng'2000, Coimbra, 26-27 May 2000.
22. CONCEIÇÃO, E.Z.E.; J.P.C. Fernandes and M. J. V. J. Grosso, “Integral Simulation
of the Thermical Behaviour of Anaerobic Biodigester Used in Biogas Prodution”,
IX Congresso Ibérico de Energia Solar, Cordoba, Spain, 27-29 March 2000.
23. COSTA, J.J. and Oliveira, L.A. (2002) Vedação aerodinâmica: parametrização
numérica do isolamento de duas divisões. Actas. V Congresso de Métodos
Numéricos em Engenharia, Madrid (Espanha), 3-6 de Junho de 2002 (edição em
368
CD-ROM: “Métodos Numéricos en Ingeniería V”, J. M. Goicolea, C. Mota Soares,
M. Pastor y G. Bugeda (Eds.), SEMNI, España 2002).
24. CRUZ, M.G., Alexander, M.E. and Wakimoto, R.H. (2002) Predicting crown fire
behaviour to support forest fire management decision-making. In: Proceedings of
the 4th International Conference on Forest Fire Research and Wildland Fire Safety,
D.X. Viegas (ed.), Luso, Portugal, November, 18-23, Millpress Science Publishers,
Rotterdam, Netherlands.
25. CRUZ, M.G., Alexander, M.E. and Wakimoto, R.H. (2003) Definition of a fire
behavior model evaluation protocol: A case study application to crown fire behavior
models. In: USDA Forest Service Proceedings RMRS-P-29, pp: 39-50.
26. CRUZ, M.G., Alexander, M.E., Wakimoto, R.H. (2002) Definition of a fire behavior
model evaluation protocol: a case study application to crown fire behavior models.
In Proceedings of the Conference on fire, fuel treatments and ecological
restoration, Fort Collins. April 16-18, 2002
27. CRUZ, M.G., Butler B.W. and Viegas D.X. (2003) Characterization of flame radiant
heat fluxes in shrubland fires. Poster presented at the 2nd International Fire Ecology
and Fire management Congress, November 2003, Orlando, FL.
28. FERREIRA, A.D. and Lopes A.M.G. (2002) Simulação numérica e experimental do
escoamento de ar em torno de um edifício. Proc. II Congresso Nacional de
Engenharia Mecânica – CONEM 2002, João Pessoa – Brasil, 12 a 16 de Agosto de
2002, Eds. J. António Riul e M. Cavalcanti, Universidade Federal do Paraíba, 11
páginas.
29. FERREIRA, A.D. and Sousa A.C.M. (2002) Modelo de turbulência RNG: Uma
avaliação do seu desempenho. Proc. Congresso de Métodos Numéricos en
Ingeniería V, Madrid 2002, Eds. J.M. Goicolea et al., Universidade Politécnica de
Madrid, Madrid, Espanha, 03 a 06 de Junho de 2002, 16 páginas.
30. FERREIRA, A.D. and Vaz P.J.A. (2002) Perdas de carvão por acção do vento durante
o seu transporte em vagões: Estudo em túnel aerodinâmico. Proc. II Congresso
Nacional de Engenharia Mecânica – CONEM 2002, João Pessoa – Brasil, 12 a 16
de Agosto de 2002, Eds. J. António Riul e M. Cavalcanti, Universidade Federal do
Paraíba, 11 páginas.
31. FERREIRA, A.D.; A.C.M. Sousa and D.X. Viegas, “Avaliação do efeito do vento
sobre transeuntes usando a simulação numérica”, Proc. 6º Congresso Nacional de
Mecânica Aplicada e Computacional, Aveiro, pp. 1381-1390, April 17-19, 2000.
32. FERREIRA, A.D.; A.C.M. Sousa and D.X. Viegas, “Numerical tests of the k- and
RNG turbulence models for the flow around a 3D surface mounted obstacle”, Proc.
9th Annual Conference of the CFD Society of Canada, Waterloo, Canada, (Ed. G.E.
Schneider), pp.524-529, May 27-29, 2001.
33. FERREIRA, A.D.; A.C.M. Sousa and D.X. Viegas, “Prediction of building
interference effects”, Proc. 4th International Colloquium on Bluff Body
Aerodynamics & Applications, Bochum, Germany, September 11-14, 2000.
369
34. FERREIRA, A.D.; D.X. Viegas and A.C.M. Sousa, “Full-scale measurements of coal
dust release during train transportation”. Proc. 3rd European-African Conference on
Wind Engineering, pp. 149-156, Eindhoven Technical University, Netherlands, 2-6
July 2001.
35. FERREIRA, J.M., Costa, J.J and Figueiredo, A.R. (2002) Estudo numérico do efeito
de protecção térmica de um meio poroso húmido. Actas do V Congreso de
Métodos Numéricos en Engenieria, Madrid, 3-6 Junho, 2002 (CD-ROM: “Métodos
Numéricos en Ingeniería V”, J. M. Goicolea, C. Mota Soares, M. Pastor y G.
Bugeda (Eds.), © SEMNI, España 2002).
36. FERREIRA, A.D. and P.J.A. Vaz, "Coal dust release from open train wagons: a wind
tunnel study", 11th International Conference on Wind Engineering, Lubbock,
Texas, EUA, 02 a 05 de Junho de 2003, pp. 1877-1884.
37. FIGUEIREDO, R. and Costa J. J. (2002) Analysis of the Behaviour of Wet Porous
Media Used as Thermal Protection Against High Intensity Surface Heat Fluxes”,
comunicação apresentada na IV International Conference on Forest Fires Research.
Luso, 18-23 de Novembro de 2002.
38.
FIGUEIREDO A.R., Costa J.J, Vaz G.C. (2004) Experimental Study on the
Behaviour of a Wet Porous Medium Used for Thermal Protection against the Direct
Impact of Flames. International Conference on Applications of Porous Media.
Universidade de Évora, 24 a 27 de Maio de 2004 "
39. FREIRE, F, Malça, J and Rozakis, S (2003) Integrated Economic and Environmental
Life Cycle Optimization: an Application to Biofuel Production in France.
Proceedings volume based on a selection of papers presented at the 56th meeting of
the European Working Group MULTIPLE CRITERIA DECISION AIDING, 2002.
40. FREIRE, F, Malça, J and Rozakis, S. (2002) Biofuel production systems in France:
integrated economic and environmental life cycle optimization. II Int. Conf. on
Mechanical Engineering, VI Conf. on Industrial Thermal Energy, Renewable
Energy and the Environment Universidad Central de Las Villas, 13-15 Nov., 2002,
Cuba.
41. FREIRE, F. and Thore, S. (2002) Life Cycle Activity Analysis: An integrated
environmental and economic mathematical programming decision-support model.
Proceedings of the Seminar “Comprehensibe economic and spatial bio-energy
modeling”. Serie A: Options Méditerranéenes, nº 48 CHIEAM.
42. FREIRE, F., “Economic and Environmental Optimization of the Life Cycle of
Products: Methodology and Applications”. Oikos Phd Summer Academy 2001:
“Environmental Management & Policy And Related Aspects Of Sustainability”,
University of St. Gallen, Switzerland, August 27-31, 2001.
43. FREIRE, F.; P. Ferrão; Sten Thore and R. Figueiredo, “Integrating Economics and
Thermodynamics in the Optimization of the Life Cycle of Products”. Poster,
Gordon Research Conference on Modern Developments in Thermodynamics.
Session: “Thermodynamics and Economics”. Italy, April 18-23, 1999.
370
44. GASPAR, A.R. and Quintela, D.A. (2002) Thermal Improvement of Indoor
Environments Through an Architectural Correction. ROOMVENT 2002 – 8th
International Conference on Air Distribution in Rooms, Copenhagen-Denmark, 811 September 2002.
45. GASPAR, A.R., Raimundo, A M. and Quintela, D.A. (2002) Thermal Performance
of a Local Heating System. The Individual Perspective. ROOMVENT 2002 – 8th
International Conference on Air Distribution in Rooms, Copenhagen-Denmark, 811 September 2002.
46. GERBER, A.G., Ji S., Ferreira A.D. and Sousa A.C.M. (2002) Particle dispersion
modelling using an Algebraic Slip Model with Moving Grids. Proc. 4th
International Conference on Nonlinear Mechanics, Shanghai 2002, Eds. Chien
Wei-zang et al., Shanghai University Press, Shanghai, China, August 2002, pp. 778783.
47. GÓIS, J.; I. Plaksin; J. Campos; R. Mendes and J. Ribeiro, “Mecanismos de extinção
e propagação de uma onda de detonação”. CD ROM - 4º Encontro de Técnico de
Materiais e Química, Ed. IpqM, Rio de Janeiro, Brazil, Nov. 12-14, 2001.
48. GÓIS, J.C., Campos J.and Plaksin, I. (2003) Effect of GMB on detonation wave
propagation and cellular structure of NM/PMMA-GMB mixtures. Proceedings of
the 5th International Symposium on Behaviour of Dense Media under High
Dynamic Pressures, Saint-Malo, França, 23 –27 Jun., pp. 217 – 228.
49.
GÓIS, J.C.; F. Chaves; P. Simões; L. Pedroso; I. Plaksin; R. Mendes; J.
Ribeiro; A. Portugal and J. Campos, “Cook-off test: models and results”. NATO
Advanced Research Workshop on Defence Industries: Science Technology related
Security – Impact of Conventional Munition on Environment and Population, Porto,
Portugal, October 29-31, 2001.
50.
HERRMANN M., Teipel U., Mikonsaari I., Krause H., Kaiser M., Hühn R.,
Lefebvre M.H., Martin C., van der Heijden A.E.D.M., Bouma R., Hordijk A.C., van
der Steen A., van Gool J. A., Plaksin I., Campos J., Mendes R. and Gois J. (2004)
ERG114-009: PARTICLE PROCESSING AND CHARACTERISATION.
Proceedings of the 35th ICT, International Annual Conference, Karlsruhe,
Alemanha, 30 Jun-2 Jul.
51.
JORGENSSEN F., Popilolek Z., Melikov A. K., Silva M. C. G. (2004) Total
uncertainty of low velocity thermal anemometers for measurement of indoor air
movements, 9th International Conference on Air Distribution in Rooms –
ROOMVENT 2004, Coimbra, 5 a 8 de Setembro de 2004.
52. KENNEDY, J., Martin, E., Burnside, N., Thomas, K., Lee, K., Martinez, M., Garcia,
I., Lester, C., Plaksin, I., Campos, J., Mendes, R., Direito, J.and Ribeiro, J. (2003)
Detonation-spreading measurement techniques for instrumented Forest Tests.
Proceedings of the 5th International Symposium on Behaviour of Dense Media
under High Dynamic Pressures, Saint-Malo, França, 23 –27 Jun., pp. 115 – 124.
53. KENNEDY, J., Thomas, K., Martin, E., Lee, K., Asay, B., Plaksin, I., and Campos, J.
(2003) Instrumented Forest Test of Detonation Spreading. Proceedings of the
Conference of the American Physical Society – Topical Group on Shock
371
Compression of Condensed Matter, 20 – 25 Julho, Portland, E.U.A. (em
publicação).
54. LAPA, L.P; A.M.G. Lopes and L.A. Oliveira, “Versatilidade geométrica na
modelação numérica do transporte de partículas sólidas no seio de um escoamento
bidimensional”, Proc. “II Congresso Luso-Moçambicano de Engenharia”, pp. J29J40, Maputo, Mozambique, 4-6 September, 2001.
55. LOPES, A.M.G and L.A. Oliveira, “Estudo numérico da influência de uma estenose
no escoamento associado à função respiratória”, Proc. “II Congresso LusoMoçambicano de Engenharia”, pp. J16-J28, Maputo, Mozambique, 4-6 September,
2001.
56. LOPES, A.M.G. and Carvalheira, P. (2002). On the Application of Numerical
Methods for the Calculation of the External Aerodynamics of a Streamlined Car
Body. SAE2003 World Congress, 3-6 Março de 2003.
57. MALÇA, J and Freire, F (2004) Life cycle energy analysis for bioethanol: allocation
methods and implications for energy efficiency and renewability.17th International
Conference on Efficiency, Costs, Optimization, Simulation and Environmental
Impact of Energy and Process Systems (ECOS 2004). 7-9 July, 2004. Guanajuato
City, Mexico
58. MANTA, M. I., Viegas, D. X. and Mata Reis, R. (2002) Reliability of the fire
weather index from meteorological station in the Central Region of Portugal. In:
Proceedings of the 4th International Conference on Forest Fire Research and
Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal, November, 18-23,
Millpress Science Publishers, Rotterdam, Netherlands. (Oral presentation).
59. MARTINHO N., Silva M.C.G., Ramos J. (2004) Experimental and Numerical
evaluation of Thermal Comfort in Passenger Cabins, apresentação oral no World
Automotive Congress – FISITA 2004, 23-27 Maio de 2004, Barcelona, Espanha.
60. MARTINHO, N.A.G., Ramos J.E. and Silva M.C.G. (2002) Thermal Environment in
the Cabin of a Multi Purpose Vehicle. Proc. Eighth International Conference on Air
Distribution in Rooms ROOMVENT 2002, Copenhaga, 8-11 Setembro 2002.
61. MATEUS, M.L.O., Henriques R., Silva N. and Silva, M.C.G. (2003). Levantamento
da carta de ruído na zona ribeirinha do Mondego na cidade de Coimbra. Encontro
Ibérico de Acústica, Bilbao, 15-17 de Outubro.
62. MELIKOV A.K., Janicas N.R.J., Silva M.C.G. (2004) A method for correction of
manikin determined segmental equivalent temperature for error due to incomplete
contact of the body with a surface, 9th International Conference on Air Distribution
in Rooms – ROOMVENT 2004, Coimbra, 5 a 8 de Setembro de 2004.
63. MENDES, J.C.A. and Silva, M.C.G. (2003) A sweating thermal environment meter.
Proc. 17th European Conference on Solid-state Transducers, Universidade do
Minho, Guimarães, 21-24 Setembro.
64. MENDES, J.C.A. and Silva, M.C.G. (2003) On the use of porous materials to
simulate evaporation in the human sweating process. 5th International Meeting on
Thermal Manikin and Modelling, Estrasburgo, 29-30 Setembro.
372
65. MENDES, R., Campos J., Plaksin I. and Ribeiro, J. (2002) Shock Initiation of
Explosives by Micro Slapper. Proceedings of the Twelfth International Symposium
on Detonation, San Diego, CA, 11-16 Aug. 2002,.
66. MENDES, R., Campos, J., Plaksin, I. and Ribeiro, J. (2002) Development of the
Divergent detonation wave in PBX based on RDX. Proceedings of the 5th Seminar
of New trends in research on energetic materials, University of Pardubice, Czech
Republic, 2002, pp 178-184.
67. MENDES, R., Plaksin, I., Campos, J., E Ribeiro, J., “Double slapper initiation of the
PBX”, Shock Compression of Condensed Matter, ed. by Furnish, M., Chabildas, L.
and Hixson, R., AIP Conference Proceedings 505, pp. 915-918, NY, USA, 2000.
68. MENDES, R.; J. Campos; I. Plaksin and J. Ribeiro, “Micro-slapper initiators”, NATO
Advanced Research Workshop - Defense Industries: Science and Technology
Related Security-Impact of Conventional Munition on Environment and Population,
Porto, Portugal, 2001.
69. MENDES, R.; P. J. Mendes; A. Campos; J. Ribeiro; I. Plasksin and J.C. Góis,
“Sistema de ignição de materiais energéticos”. CD-ROM - 4º Encontro de
Materiais e Química, Rio de Janeiro, Brazil, November 12-14, 2001.
70. MENDES, R; J. Campos; I. Plaksin and J. Ribeiro, “Shock to detonation transition in
a PBX based on RDX”, 32nd ICT, International Annual Conference, Karlsruhe,
Germany, 19.1-19-11, 2001.
71.
MENDES, V.M. and D.A. Quintela, “Desenvolvimento de um Modelo Físico de
Chaminés Industriais em Condições de Estabilidade Atmosférica”. 1º Congresso
Luso-Moçambicano de Engenharia, Maputo, Mozambique, September 14-16, 1999.
72. MORGADO, J., Durães, L., Campos J. and Portugal, A. (2002) Iron oxide/aluminium
fast thermite reaction using nitrare aditives. Proceedings of the 5th Seminar of New
trends in research on energetic materials, University of Pardubice, Czech Republic,
2002, pp 208-222.
73.
MIRANDA, A.I., Viegas, D.X., Rocha, A., Martins, H., Carvalho, A.C., Marques
C. And Borrego, C. (2004) Climate change and Forest Fire Weather Risk.
Symposium Environment Identité Méditerranée – EIM 2004. July 19-25, 2004.
University of Corsica, France.
74.
NETO, L.P.C. and Silva, M.C.G (2003) Influence of the Jet Initial Angle on the
Performance of an Air Curtain. Proc. Conferência Internacional Healthy Buidings
2003, Singapura, 7-11 de Dezembro.
75. NETO, L.P.C.and Silva, M.C.G. (2003) Estudo da Vedação Aerodinâmica de
Espaços Climatizados – Alguns Resultados. Proc. VI Congresso Ibero-Americano
de Engenharia Mecânica, Universidade de Coimbra, 16-18 Outubro.
76. OLIVEIRA, A.V., Gaspar, A.R. and Quintela, D.A. (2004) Assessment of the
Thermal Insulation of the Air Layer with a Movable Thermal Manikin.
ROOMVENT 2004 – 9th International Conference on Air Distribution in Rooms,
Coimbra - Portugal, 5-8 September 2004.
373
77. OLIVEIRA, L.A., Costa V.F., and Baliga B.R. (2004) A Lagrangian model for the
dispersion of solid particles, in three-dimensional flow, using a CVFEM for the
prediction of the continuous phase. Aceite para apresentação em RoomVent 2004,
9.th International Conference on Air Distribution in Rooms”. Universidade de
Coimbra, 5 a 8 de Setembro de 2004
78. OLIVEIRA, L.A.; V.F. Costa and B.R. Baliga, “A Lagrangian Model for the
Dispersion of Solid Particles, in Two-Dimensional Flow, Using a CVFEM for the
Prediction of the Continuous Phase”, Computational Mechanics for the Next
Millennium, Vol 1 : Solid Mechanics and Fluid Mechanics, Pergamon, Elsevier, pp.
583-588 (Proc. “Fourth Asia-Pacific Conference on Computational Mechanics for
the Next Millennium” (APCOM ’99), Singapura, December 15-17, 1999).
79. PAIVA, J. M., Pinho, C. and Figueiredo, R.(2002) Graphical Derivation of the
Efficiency of an Endoreversible Carnot Engine at Maximum Power Output. IX
Congresso Brasileiro de Engenharia e Ciências Térmicas, ENCIT 2002.
80.
PAIVA, J.M.; C.T Pinho and A.R. Figueiredo, “Evolution of pressure drop inside
different layers of an atmospheric fluidized bed, Proceedings of the 7th Brazilian
Congress of Engineering and Thermal Sciences, Rio de Janeiro, Brazil, Vol. 2, pp.
827-831, November 3-6 1999.
81. PAIVA, J.M.; C.T. Pinho and A.R. Figueiredo, “Definition of the Transition
Between Bubbling and Turbulent Fluidization Through Bed Mean Voidage
Variation”, COBEM 2001, Uberlândia, Brazil, November 2001.
82. PAIVA, J.M.; C.T. Pinho and A.R. Figueiredo, “Distributor Plate Influence on
Fluidization Quality, Measuring Pressure Drop Evolution in Adjacent Slices
Through the Bed”, Proceedings of the FEDSM00- 2000 ASME Fluids Engineering
Division Summer Meeting, Boston, Massachussets, USA, June 11-15, 2000.
83. PAIVA, J.M.; C.T. Pinho and A.R. Figueiredo, “Pressure Drop Behaviour inside an
Atmospheric Fluidised Bed, from Minimum to Incipient Fast Fluidisation, using
different Distributor Plates”, Proceedings of the XV COBEM- Brazilian Congress of
Mechanical Engineering, Águas de Lindóia, São Paulo, Brazil, CD ROM edition,
November 22-26, 1999.
84. PAIVA, J.M.; C.T. Pinho and A.R. Figueiredo, “The Influence of the Distributor
Plate on the Bottom Zone of a Fluidized Bed”, COBEM 2001, Uberlândia, Brazil,
November 2001.
85. PLAKSIN I., Campos J., Direito J., Ribeiro J., Mendes R. and Góis J. (2004) “Birth
and dead of the PBX’ detonation in a mezzo-scale. Effect of the grain size and
binder’s nature in ignition and failure detonation” Proceedings of the 35th ICT,
International Annual Conference, Karlsruhe, Alemanha, 30 Jun-2 Jul.
86. PLAKSIN I., Direito J., Campos J., Coffey C.S. (2004) Kinetics Diagrams at Shock
Ignition of PBX and Non-Ideal Explosive, Preprints of the International Conference
on New Models and Hydrocodes for Shock Wave Processes, University of
Maryland University College, College Park, Maryland, USA, 16-20 May, 2004.
374
87. PLAKSIN, I, Campos J., Simões, P., Portugal, A., Ribeiro, J., Mendes R., Góis, J.
(2002) Detonation Study of Energetic Micro Samples. Proceedings of the Twelfth
International Symposium on Detonation, San Diego, CA, 11-16 Aug. 2002, em
publicação.
88. PLAKSIN, I., Campos, J., Mendes, R., Ribeiro, J. and Góis, J., “Mechanism of
detonation wave propagation in PBX with energetic binder”; Shock Compression of
Condensed Matter, Co, ed. by Furnish, M., Chabildas, L. and Hixson, R., AIP
Conference Proceedings 505, pp, 817-820, NY, 2000.
89. PLAKSIN, I., Campos, J., Mendes, R., Ribeiro, J., Simões, P., Portugal, A., Góis, J.C.
and Pedroso, L. (2003) Meso-scale optical metrology of shock and detonation
waves. Proceedings of the 34th International Annual Conference of ICT, Karsruhe,
Germany, 25–27 Jun., pp. 156.
90. PLAKSIN, I., Campos, J., Ribeiro, J., Mendes R. and Portugal A., “Detonation study
of the PBX microsamples”; 2000, Shock Waves in Condensed Matter, St.
Petersburg, Russia, 8-13 Oct., (accepted for publication Chem. Phys. Reports).
91. PLAKSIN, I., Campos, J., Simões, P., Portugal, A., Ribeiro, J., Mendes, R., Góis,
J.C., Direito, J. and Braga, D. (2003) Coarse explosive particles of PBX as a
dominant factor of detonation instability. Proceedings of the Conference of the
American Physical Society – Topical Group on Shock Compression of Condensed
Matter, 20–25 Julho, Portland, E.U.A. (em publicação).
92. PLAKSIN, I; J. Campos; J. Ribeiro and R. Mendes, “Irregularities of detonation wave
structure and propagation in PBX”, 32nd ICT, International Annual Conference,
Karlsruhe, Germany, pp. 31.1-31.14, 2001.
93. QUINTELA, D.A., “Thermal Comfort in Buildings – the Portuguese Experience”,
Second EDF Research Workshops, Paris, France, October 28, 1999.
94. QUINTELA, D.A., Gaspar, A.R. and Borges, C.P. (2003) Analysis of Sensible Heat
Exchanges from a Thermal Manikin. 5th International Meeting on Thermal Manikin
and Modelling, Strasbourg, France, September 29-30th.
95. QUINTELA, Divo; A. Gaspar and A. Raimundo, “Development of local heating
systems for thermal comfort and energy savings in buildings”, Proceedings of the
International Conference UIE 2000, Electricity for a Sustainable Urban
Development. Parque das Nações, Lisbon, Portugal, pp. 209-217, November 1-4,
2000.
96. RAIMUNDO, A.M., Costa, J.J. and Oliveira, L.A. (2002) Numerical Modelling of
Particle Dispersion within a Displacement Ventilation System. Proceedings of
“RoomVent 2002, 8.th International Conference on Air Distribution in Rooms”.
Moltke’s Palace, Copenhagen, Denmark, 8 a 14 de Setembro de 2002, pp. 125-128.
97. RAIMUNDO, A.M., Gaspar, A.R. and Quintela D.A (2004) Modelação Numérica das
Trocas de Calor Radiativas entre o Corpo Humano e Superfícies Envolventes.
CLIMAMED – Congresso Mediterrânico de Climatização, Lisboa, 16 e 17 de Abril
de 2004. Apresentada por Raimundo, A. M.
375
98. RAIMUNDO, A.M., Gaspar, A.R. and Quintela, D.A. (2004) Analysis of a Local
Heating System for Thermal Comfort: the Numerical Approach. ROOMVENT 2004
– 9th International Conference on Air Distribution in Rooms, Coimbra - Portugal, 58 September 2004. Comunicação proposta para apresentação
99. RIBEIRO, J., Campos, J, Plaksin, I. and Mendes, R. (2002) Mechanism of shock
propagation in porous materials at mesoscale level”. Proc of the New Models and
Hydrocodes for Shock Wave Processes in Condensed Matter, Edinburgh, UK May
2002.
100. RIBEIRO, J., Campos, J. (2003) Shock behavior of syntactic foams”, 1st Light-Weight
Armour Group Workshop Manufacture, Testing and Utilization of Light-Wight
Armour Materials, 5 Setembro, Universidade de Aveiro.
101. RIBEIRO, J., Góis, J.C., Campos, J., Plaksin, I. and Mendes, R. (2003) Investigation
of collapse and jet formation of hollow glass micro spheres in inert and energetic
materials. Proceedings of the Conference of the American Physical Society –
Topical Group on Shock Compression of Condensed Matter, 20–25 Julho, Portland,
E.U.A. (em publicação).
102. RUIVO, C. R. and R. Figueiredo, “Simulação do Comportamento Higro-Térmico de
um Rotor Excicante Aplicado numa Unidade de Tratamento de Ar”, X Congresso
Ibérico e V Congresso Ibero-Americano de Energia Solar, São Paulo, Brazil,
August 29 - September 1, 2000.
103. RUIVO, Celestino; A. Rui Figueiredo and José J. Costa, “Simplified Simulation of
the Heat and Mass Transfer in a Desiccant Medium Used in a Desiccan-Evaporative
Cooling System”, HPC 2001, Cooling, Heating and Power Generation Systems,
Conservatoire Nationale des Arts et Métiers, Paris, 5-7 September, 2001.
104. RUIVO, C.R. , Costa, J.J. and Figueiredo, A.R. (2002) Caracterização numérica da
transferência de calor e de massa num escoamento de ar confinado por paredes
porosas húmidas. Actas do V Congreso de Métodos Numéricos en Engenieri,
Madrid, 3-6 Junho, 2002 (CD-ROM: “Métodos Numéricos en Ingeniería V”, J. M.
Goicolea, C. Mota Soares, M. Pastor y G. Bugeda (Eds.), © SEMNI, España
2002).
105. RUIVO C., Figueiredo A.R., Costa J.J. (2004) Predicted results of the performance
of a unizone solid-desiccant evaporative cooling system. CLIMAMED - Congresso
Mediterrânico de Climatização, Lisboa, 16 e 17 de Abril de 2004.
106. RUIVO C., Costa JJ, Figueiredo A.R. (2004) Numerical Analysis of the
Thermodynamic Behaviour of a Micro-Porous Desiccant Layer. International
Conference on Applications of Porous Media. Universidade de Évora, 24 a 27 de
Maio de 2004.
107. SILVA M.C.G., Alcobia C., Janicas N., Ramos J., Martinho N., Ramos J. (2004)
Combistress – Development of a Methodology to Analyse the Combined Effect of
Discomfort Stressors in Riding Passengers”,
apresentação oral no World
Automotive Congress – FISITA 2004, 23-27 Maio de 2004, Barcelona.
376
108. SILVA, M.C.G and Mateus M.L.O. (2003) Desenvolvimento de aplicações
computacionais para o estudo da influência dos parâmetros de amostragem de sinais
do nível de pressão sonora na exactidão dos valores determinados do nível
equivalente Leq. Proc. Encontro Ibérico de Acústica, Bilbao, 15-17 de Outubro.
109. SILVA, M.C.G. and Mendes J.C.F. (2002) Development of a Sweating Thermal
Comfort Meter. Proc. Eighth International Conference on Air Distribution in
Rooms ROOMVENT 2002, Copenhaga, 8-11 Setembro 2002.
110. SILVA, M.C.G., Mateus M.L.O. and Martins B. (2003) Análise do Ruído durante a
semana da festa académica da Queima das Fitas na cidade de Coimbra. Proc.
Encontro Ibérico de Acústica, Bilbao, 15-17 de Outubro.
111. SILVA, M.C.G., Neto L.P. and Brites G.V. (2002) Aerodynamic Sealing with Air
Curtains; Experimental Tests. Proc. Eighth International Conference on Air
Distribution in Rooms ROOMVENT 2002, Copenhaga, 8-11 Setembro 2002
112. SILVA, M.C.G.; J.M. Silva Cruz and M. L.O. Sousa Mateus, “O Ensino das Leis da
Cinemática a partir de Ensaios Experimentais com um Modelo Rádio-Controlado”,
Proc. Conferência Física 2000, 12º Conferência Nacional de Física, pp. 102-103,
Figueira da Foz, September 27-30, 2000.
113. SILVA, M.C.G.; L. M. V. Serrano; M. L. O. .S. Mateus, “Automatic Data
Acquisition and Control of an Engine Test Bench”. Session on “Applied
Measurement Technologies for Vehicle Component Assessment and Development”
of the Conference of Testing Expo 2001, Stutgart, Germany, 19-21 June, 2001.
114. THELLIER, F., Leduc, G., Endravadan, M., Quintela, D.A., Gaspar, A.R. and
Raimundo, A.M. (2004) Local Radiative Heat Transfer on a Human Body.
Analyses through Modelling”. ROOMVENT 2004 – 9th International Conference on
Air Distribution in Rooms, Coimbra - Portugal, 5-8 September 2004. Comunicação
proposta para apresentação.
115. VAZ, G.C., André, J.C.S. and Viegas, D.X. (2002) Modelling the spread of a
straight and steady fire front through a horizontal porous fuel bed without wind. In:
Proceedings of the 4th International Conference on Forest Fire Research and
Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal, November, 18-23,
Millpress Science Publishers, Rotterdam, Netherlands. (Oral presentation).
116. VIEGAS D.X. (2003) Integration of scientific research results in forest fire
management. Comunicação oral apresentada na 3rd International Wildland Fire
Conference and Exhibition. Sydney, 4-6 Outubro.
117.
VIEGAS D.X., Allgöwer B, Koutsias N and Eftichidis G. (2003) Fire Spread and
the Urban Wildland Interface Problem. Comunicação oral apresentada no
International Workshop on "Forest Fires in the Wildland-Urban Interface and
Rural Areas in Europe: an integral planning and management challenge",15-16
Maio.
118. VIEGAS, D.X. (2002) The fire line rotation concept. In: Proceedings of the 4th
International Conference on Forest Fire Research and Wildland Fire Safety, D.X.
377
Viegas (ed.), Luso, Portugal, November, 18-23, Millpress Science Publishers,
Rotterdam, Netherlands. (Oral presentation).
119. VIEGAS, D.X. (2002). Forest Fire Research. Int. Conf. GDIN: Global Disaster
Information Network, 17-21 June 02, Rome, Italy.
120. VIEGAS DX, 2004. Forest fires in Portugal in 2003. Dietro Líncendio dei
Boschi...L’huomo. Recenti indirizzi nella prevenzione e nella repressione. Firenze,
Italy. 25-26 May.
121. VIEGAS DX (2004) Investigação em Incêndios Florestais. 3º Seminário SulAmericano e 7ª Reunião Técnica Conjunta SIF/FUPEF/IPEF sobre Controle de
Incêndios Florestais, Curitiba, Brasil, 14-17 Junho 2004.
122. VIEGAS, D.X. (2003) Forest Fire Research State of the Art in Europe. EU-MEDIN
Forum on Disaster Research "The Road to Harmonization", Grécia. 26-27 Maio.
123. VIEGAS, D.X. (2003) Forest Fire Research and Application in Southern Europe”.
UN Conference on Early Warning in Natural Disasters, Potsdam, Berlim, Julho.
124. VIEGAS, D.X. and Pita, L.P. (2002) Fire spread in Canyons. In: Proceedings of the
4th International Conference on Forest Fire Research and Wildland Fire Safety,
D.X. Viegas (ed.), Luso, Portugal, November, 18-23, Millpress Science Publishers,
Rotterdam, Netherlands. (Lecture).
125. VIEGAS, D.X., Afonso, C. and Cruz, M.G. (2002). Combustibility of heterogeneous
fuels. In: Proceedings of the 4th International Conference on Forest Fire Research
and Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal, November, 18-23,
Millpress Science Publishers, Rotterdam, Netherlands. (Poster presentation).
126. VIEGAS, D.X., Cruz, M.G., Ribeiro, L.M., Silva, A.J., Ollero, A., Arrue, B., Dios,
R., Gómez-Rodríguez, F., Merino, L., Miranda, A.I. and Santos, P. (2002) Gestosa
fire spread experiments. In: Proceedings of the 4th International Conference on
Forest Fire Research and Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal,
November, 18 - 23, Millpress Science Publishers, Rotterdam, Netherlands.
127. VIEGAS, D.X., Ribeiro, L.M., Fernando, B. and Silva, A.J. (2002) A pilot
experiment of application of advanced fire detection systems to support fire
management - Project Eagle. In: Proceedings of the 4th International Conference
on Forest Fire Research and Wildland Fire Safety, D.X. Viegas (ed.), Luso,
Portugal, November, 18-23, Millpress Science Publishers, Rotterdam, Netherlands.
(Poster presentation).
128. VIEGAS, D.X., Ribeiro, L.M., Matos, L., Palheiro, P., Pita, L.P. and Afonso, C.
(2002) Slope and wind effects on fire spread. In: Proceedings of the 4th
International Conference on Forest Fire Research and Wildland Fire Safety, D.X.
Viegas (ed.), Luso, Portugal, November, 18-23, Millpress Science Publishers,
Rotterdam, Netherlands. (Oral presentation).
129. VIEGAS, D.X., Ribeiro, L.M., Silva, A.J. and Palheiro, P. (2002) Analysis of S.
Domingos accident. In: Proceedings of the 4th International Conference on Forest
Fire Research and Wildland Fire Safety, D.X. Viegas (ed.), Luso, Portugal,
378
November, 18-23, Millpress Science Publishers, Rotterdam, Netherlands. (Oral
presentation).
130. VIEGAS, D.X., Viegas, M.T., Ribeiro, L.M. and Cruz, M.G. (2002) A pilot study of
herbaceous fuels in Central Portugal. In: Proceedings of the 4th International
Conference on Forest Fire Research and Wildland Fire Safety, D.X. Viegas (ed.),
Luso, Portugal, November, 18-23, Millpress Science Publishers, Rotterdam,
Netherlands. (Poster presentation).
131. VIEGAS, D.X.; A.J. Matos Silva and M. Gomes Cruz, “Analysis of Three Fatal
Accidents Involving Portuguese Firefighters”. 2000 International Wildfire Safety
Summit. Edmonton, Canada, October 9-13, 2000.
1.
COSTA, J. J. and L A. Oliveira, “Vedação aerodinâmica por cortina de ar – estudo
numérico”, Proc. I Jornadas Técnicas de Primavera da EFRIARC, Porto, 23 de
Março de 2001. (Also published in Climatização - Revista de Aquecimento, Ar
Condicionado, Ventilação e Energia, nº 15, pp. 30-38, May/June 2001).
2.
GASPAR, A.R.; A.M. Raimundo and D.A Quintela, “Sistemas de Aquecimento
Localizado para Conforto Térmico e Economia de Energia em Edifícios”. Proc. 2º
Encontro Nacional do Colégio de Engenharia Mecânica, Ordem dos Engenheiros
Portugueses, Hotel D. Luís, Coimbra, Portugal, pp. 5.7 a 5.16, 15 e 16 Dezembro de
2000.
3.
GÓIS, J.C. , “Estudo de materiais energéticos”, 2as Jornadas de Engenharia
Mecânica, Instituto Politécnico da Guarda, 1 – 2 Junho 2000.
4.
GÓIS, J.C., “Compactação, Soldadura e Corte por Explosivos”, 2ª Semana da
Engenharia, Departamento de Engenharia Mecânica da Escola Superior de
Tecnologia de Abrantes, Instituto Politécnico de Tomar, 15-19 Abril 2002.
5.
GOMES, A.F. and D. A. Quintela, “Avaliação das Vibrações ao nível do Banco de
Operadores de Tractores Agrícolas”, VI Simpósio Nacional do ISMAI sobre
Segurança Higiene e Saúde no Trabalho, Maia, Portugal, October 25-26, 2001.
6.
OLIM, M.M.; M. L. Riethmuller and M.C.G. da Silva, “Medições do Escoamento de
Baixa Velocidade em torno de uma Sonda Anemométrica de Esfera Aquecida”,
Proc. 2º Encontro Nacional do Colégio de Engenharia Mecânica, pp. 5.47-5.54,
Coimbra, December 15-16, 2000.
7.
OLIVEIRA, A. V.; A.R. Gaspar and D. A. Quintela, “Avaliação de Postos de
Trabalho com Exposição ao Calor”, VI Simpósio Nacional do ISMAI sobre
Segurança Higiene e Saúde no Trabalho, Maia, Portugal, October 25-26, 2001.
8.
PEREIRA, C.A.C. and M.C.G. Silva, “Utilização de um Método de Interpolação
Linear no Processo de Medição com Sonda de Sete Furos”, Proc. 2º Encontro
Nacional do Colégio de Engenharia Mecânica, pp. 5.55-5.64, Coimbra, Dec. 15-16,
2000.
379
9.
RAIMUNDO, A; A. Gaspar and D. A. Quintela, “Influência da localização de
Unidades Murais de Climatização no Conforto Térmico dos Ocupantes”, I Jornadas
Técnicas de Primavera da EFRIARC, Climatização & Refrigeração em Portugal,
Porto, Portugal, pp. 25-36, March, 2001.
10. SERRANO, L.M.V.; Mário L.O.S. Mateus and M.C.G. Silva, “Desenvolvimento de
um Sistema Automático para o Controlo e a Aquisição de Dados de um Banco de
Ensaio de Motores”, Proc. 2º Encontro Nacional do Colégio de Engenharia
Mecânica, pp. 5.39-5.46, Coimbra, December 15-16, 2000.
11. SILVA, M.C.G. and C.J. Alcobia, “Estudo do Conforto em Veículos de Transporte
Público de Passageiros”, 1º Congresso da ARAN – Associação Nacional do Ramo
Automóvel, Espinho, November 5-6, 1999.
12. SILVA, M.C.G., “Perspectivas dos Investigadores”, Seminário sobre Análise e
Perspectivas do Desenvolvimento da Investigação em Engenharia Mecânica,
Instituto Superior Técnico, Lisbon, March 31, 1999.
13. VIEGAS, D.X., “Os Incêndios Florestais e as Mudanças Climáticas”. Curso sobre
Ecología del fuego: fuego y medio ambiente, University of Murcia, Moratalla,
Spain, September 11-15, 2000.
14. ALCOBIA, C.J.O., Serrano L.M.V., Barbosa J.I.F. and Silva M.C.G. (2003) Cálculo
e medição da compatibilidade de um veículo rebocado, Actas das III Jornadas
Politécnicas de Engenharia Mecânica, Automóvel, Gestão Industrial, Energia e
Ambiente, 19 e 20 de Novembro, Instituto Superior de Engenharia de Coimbra
(ISEC).
15. ALCOBIA, C.J.O., Serrano L.M.V., Barbosa J.I.F. and Silva M.C.G. (2003) Medição
do tempo de resposta de sistemas pneumáticos de travagem de veículos rebocados.
Actas das III Jornadas Politécnicas de Engenharia Mecânica, Automóvel, Gestão
Industrial, Energia e Ambiente, 19 e 20 de Novembro, ISEC.
16. LOPES, A.M.G. e Carvalheira, P. (2003) Simulação Numérica e Experimental do
Comportamento Aerodinâmico de um Veículo. VII Congresso de Mecânica
Aplicada e Computacional, Évora, 14 a 16 de Abril.
17. MALÇA, J., Rozakis, S. and Freire, F. (2003) Análise Energética do Ciclo de Vida
de Biocombustíveis: Aplicação à fileira do bioetanol em França. Actas das 3as
Jornadas Politécnicas de Engenharia, ISEC, Coimbra, 19-20 de Novembro.
18. NETO, L.P.C. and Silva M.C.G. (2003) Utilização da Termografia de InfraVermelhos na Avaliação do Desempenho de Cortinas de Ar. II Jornadas Técnicas
de Primavera da EFRIARC, 9 de Maio.
19. OLIVEIRA, A.V., Gaspar, A.R. and Quintela, D.A. (2003) Avaliação de Postos de
Trabalho com Exposição ao Frio. Actas das II Jornadas Técnicas de Primavera da
EFRIARC – Climatização & Refrigeração em Portugal, pp.33-46, Coimbra Portugal, 9 Maio.
20. OLIVEIRA, A.V., Gaspar, A.R. and Quintela, D.A. (2003) Caracterização do
Ambiente Térmico de Postos de Trabalho nos Sectores do Comércio e Indústria de
380
Carnes. Apresentado no VIII Simpósio Nacional do ISMAI - Segurança, Higiene e
Saúde no Trabalho, Maia - Portugal, 16-17 de Outubro, 2003.
21. OLIVEIRA, A.V., Lamas, N., Maricato, B., Gaspar, A.R. and Quintela, D.A. (2003)
A Exposição ao Frio nos Sectores do Comércio e Indústria de Peixe”. Actas das 3as
Jornadas Politécnicas de Engenharia, Instituto Superior de Engenharia de Coimbra
(ISEC), Coimbra, 19 e 20 de Novembro, CD-ROM.
22. PIRES, P., Gaspar, A.R. and Quintela, D.A. (2003) VentLoc – Aplicação
Informática para o Dimensionamento de Sistemas de Ventilação Localizada.
Apresentado no VIII Simpósio Nacional do ISMAI - Segurança, Higiene e Saúde no
Trabalho, Maia - Portugal, 16-17 de Outubro.
23. QUINTELA, D.A., Gaspar A.R. and Raimundo A.M. (2003) Ferramentas de
Simulação Térmica e de Cálculo Numérico de Escoamentos em Edifícios”, 3as.
Jornadas de Climatização da Ordem dos Engenheiros, Lisboa, 15 de Maio.
24. VAZ, G.C., André, J.C.S. and Viegas, D.X. (2003) Estimação do coeficiente de
extinção da radiação em leitos sólidos porosos”, comunicação apresentada nas 3as
Jornadas Politécnicas de Engenharia. (ISBN: 972-99064-0-8), p. 36 e CD-ROM
(10 pp.). Coimbra, 19-20 Novembro.
25. RAIMUNDO A.M., Costa J.J. and Oliveira L.A. (2004) Avaliação da Eficiência de
um Sistema de Ventilação por Deslocamento na Remoção de Poluentes em
Partículas. Actas de “CMCE 2004: Congresso de Métodos Computacionais em
Engenharia”, pp. 425-439. APMTAC, LNEC, Lisboa, 31 de Maio a 2 de Junho de
2004.
26. FERREIRA, A.D., Gerber A.A., Ji S. and Sousa A.C.M. (2004) Modelação numérica
do fenómeno de erosão de leitos de partículas através de um modelo algébrico e
malhas adaptáveis, Proc. Congresso Métodos Computacionais em Engenharia, 31
Maio a 02 de Junho de 2004, LNEC, Lisboa, 12 páginas
27. VIEGAS D.X. (2004) Impactes dos Incêndios na Segurança das Populações.
Workshop Planeamento do Território e Protecção da Floresta contra Incêndios, 58 Maio 2004, Lisboa.
28. VIEGAS DX (2004) Caracterização e evolução dos incêndios florestais. Conferência
A Investigação Criminal nos Incêndios Florestais. Sertã, 26 de Maio de 2004.
Master Thesis
1.
ALCOBIA, Carlos José de Oliveira Pereira e Jorge, “Contribuição para o
Desenvolvimento de um Índice Global de Conforto para Veículos de Transporte de
Passageiros”. Faculdade de Ciências e Tecnologia da Universidade de Coimbra,
1999.
2.
BEIRÃO, Pedro Negrão, “Contribuição para o Estudo da Influência da Urbanização
sobre Elementos Climáticos”. Faculdade de Ciências e Tecnologia da Universidade
de Coimbra, 1999.
381
3.
COELHO, João André de Lima Delca Pinheiro, “Estudo dos Coeficientes de
transferência de calor do corpo humano em diferentes posições e regimes de
escoamento”. Faculdade de Ciências e Tecnologia da Universidade de Coimbra,
2001.
4.
FERREIRA, João Manuel Nogueira Malça de Matos, “Modelação numérica de
fenómenos de transferência num meio poroso húmido submetido a uma solicitação
térmica externa”. Faculdade de Ciências e Tecnologia da Universidade de Coimbra,
2000.
5.
GOMES, José Armindo Fialho, “Contribuição para o Estudo das Vibrações ao Nível
do Banco do Operador de Tractores Agrícolas”. Faculdade de Ciências e
Tecnologia da Universidade de Coimbra, 2000.
6.
GONÇALVES, João Carlos, “Experiências de propagação de frentes de fogo em leitos
porosos homogéneos e inclinados – Validação de duas conjecturas de uma teoria”.
Faculdade de Ciências e Tecnologia da Universidade de Coimbra, 2000.
7.
GREGÓRIO, Jorge Manuel Pereira, “Modelação teórica e experimental do
comportamento um permutador de calor em regime transitório”. Faculdade de
Ciências e Tecnologia da Universidade de Coimbra, 2000.
8.
PAIS, Maria Luisa Ingrês, “Análise do comportamento de um permutador de calor
em regime transiente”. Faculdade de Ciências e Tecnologia da Universidade de
Coimbra, 2001.
9.
PEREIRA, Carlos Alberto Catorze, “Utilização de um Método de Interpolação Linear
no Processo de Medição com uma Sonda de Sete Furos”. Faculdade de Ciências e
10. SANTOS, Olga Maria Simões, “Simulação Experimental do Escoamento no Recinto
da Exposição Mundial de Lisboa – EXPO ‘98”. Faculdade de Ciências e Tecnologia
da Universidade de Coimbra, 2000.
11. SERRANO, Luis Manuel Ventura, “Desenvolvimento de um Sistema para Aquisição
de Dados e Controlo de um Banco de Ensaio de Motores”. Faculdade de Ciências e
12. SOARES, António Raposo de Matos, “Sonda de Gradiente para Caracterização de
Escoamentos Turbulentos”. Faculdade de Ciências e Tecnologia da Universidade de
Coimbra, 1999.
13. MATEUS, M.L.O.S. (2002) Sistema Automático para a Determinação das
Propriedades Acústicas de Reflexão e Absorção de Paredes com um Tubo de
Impedância”. Faculdade de Ciências e Tecnologia da Universidade de Coimbra. 30
de Julho de 2002.
14. MARTINHO N.A.G. (2002) Avaliação do Conforto Térmico no Habitáculo de um
Veículo Automóvel”. Faculdade de Ciências e Tecnologia da Universidade de
Coimbra. 10 de Outubro de 2002.
382
15. CARLOS M.B. (2002). Modelação Numérica da Influência de um Escoamento
Secundário Rotativo sobre a Dispersão de Partículas Combustíveis num Queimador
Industrial”. Universidade de Coimbra, 2 de Outubro de 2002.
16. CHAVES F.R.F. (2002) Estudo da decomposição térmico de um explosivo plástico
de base RDX”, tese de Mestrado apresentada em 15 de Maio de 2002, no
Departamento de Engenharia Mecânica da Faculdade de Ciências e Tecnologia da
Universidade de Coimbra.
17. VAZ, P.J.A.(2003) Modelação experimental das perdas de carvão por erosão
durante o transporte ferroviário. Tese de Mestrado defendida em 02/09/2003, tendo
sido aprovada com a classificação de Muito Bom. Orientador: Prof. Almerindo
Domingues Ferreira.
18. OLIVERAS MENOR I. (2004) Fire Line Rotation Model and Applicability to Point
Ignition Fires and Field Fires. Long Term Effects of Varying Ignition and
Extinction on Fire Regimes. Master thesis. Universitat Autònoma de Barcelona
(Co-orientação Prof. D. X. Viegas e Dr. Josep Piñol Pascual.)
19. JANICAS, N. R. J (2004) Avaliação de ambientes térmicos não-uniformes com um
termo-manequim. Faculdade de Ciências e Tecnologia da Universidade de
Coimbra. 2004
1.
FERREIRA, Almerindo Domingues, (1999) “Simulação Numérica e Experimental do
Escoamento Turbulento em Torno de Obstáculos”. FCTUC, 1999.
2.
PAIVA, João Luís Monney de Sá (2000), “Influência da Granulometria das
Partículas Sobre o Comportamento Hidrodinâmico de Leitos Fluidizados”. FCTUC,
2001.
3.
MENDES R.A.L. (2002) Iniciação e detonação de explosivo plástico de RDX. Tese
de doutoramento defendida em 18 de Janeiro de 2002, na Universidade de Coimbra
sobre a área de Engenharia Mecânica e na especialidade de Termodinâmica.
4.
VAZ, G.C. (2002) Modelação da propagação de uma frente de chamas em linha
num leito sólido poroso na ausência de declive ou vento Tese de doutoramento
defendida em 2002, na Universidade de Coimbra na especialidade de
Aerodinâmica.
5.
MENDES, J.C.F. (2003) Modelação da Resposta Termo-Higrométrica do Corpo
Humano. Tese de doutoramento, Faculdade de Ciências e Tecnologia da
Universidade de Coimbra, Abril de 2003. Orientador: Prof. Manuel C. Gameiro
Silva
6.
NOLASCO, M.I. (2003) Estudio de la estructura y funcionamento de dos indices de
peligro meteorológico de incendios forestales. Aplicacion a tres zonas climaticas de
Espana Peninsular. Tese de doutoramento. Universidad Politecnica de Madrid.
7.
RIBEIRO, J.M.B. (2003) Propagação de ondas de choque em espumas sintácticas.
Tese de doutoramento defendida em 14 de Novembro de 2003, na Universidade de
383
Coimbra sobre a área de Engenharia Mecânica e na especialidade de
Termodinâmica.
8.
CRUZ, M.G. (2004) Ignition of crown fuels above a spreading surface fire. Ph.D.
Dissertation. University of Montana, Missoula, MT. 240 pp.
9.
BRANCO, J. G. F.(2004) Fenómenos de transferência de calor massa e quantidade de
movimento à luz da primeira e da seguna leis da Termodinâmica: Reflexões a partir
da queima de partículas não esféricas.Universidade Coimbra. 28 de Julho de 2004
10. GASPAR, Adélio (2004) Contribuição para o Estudo de Ambientes Térmicos
Interiores – A Dimensão do Indivíduo e do Edifício: da Experimentação à
Modelação. Dissertação para Doutoramento, Faculdade de Ciências e Tecnologia da
Universidade de Coimbra, Coimbra, 2004. Submetida para discussão
Technical Reports
1.
ANDRÉ, J.C.S and G. C. Vaz, “Project INFLAME – Forest Fire Behaviour
Modelling: Part 2 – 1st Semi-empirical approach”,. Jan 01. Deliverable D7/9 do
Projecto INFLAME (Contr. ENV4-CT98-0700, Progr. ENVIRONMENT &
CLIMATE II, CE): pp. 14-69.
2.
ANDRÉ, J.C.S. and J.C. Gonçalves, “Project INFLAME – Validation Studies: First
semi-empirical approach for the fire behaviour modelling” (19+42 pp.). Dez 2000.
Deliverable D.8.
3.
ANDRÉ, J.C.S., “Estatística (Indutiva): Introdução: Conceitos-Base e Objectivo (6
pp.), Estimativa de Parâmetros por Intervalos de Confiança (27 pp.), Testes de
Hipóteses (20 pp.)”. 1998/99/00. Textos de apoio a aulas teóricas de Tratamento
Estatístico de Dados.
4.
ANDRÉ, J.C.S., “Fire Behaviour Prediction (Empirical & Semi-Empirical):
Synthetic Review” (1+9 pp.), DELFI Knowledge Base Forms (47 pp.),
Bibliography (12 pp.). Jun 99: written by invitation of the Concerted Action DELFI
(Contr. ENV4-CT98-0735, Progr. ENVIRONMENT & CLIMATE II, CE).
5.
ANDRÉ, J.C.S., “Modelos de simulação do comportamento da frente de chamas
“(Apresentação em Power Point, 94 slides). April 2000. Módulo de Curso sobre
Comportamento dos incêndios florestais (Curso C1 da Série de Cursos de Formação
Especializada em Incêndios Florestais, Coord.: D.X. Viegas, ADAI/CEIF).
Coimbra.
6.
ANDRÉ, J.C.S., Análise Tensorial: Teoria (3+72 pp.), Formulário (3 pp.), Resumo
Teórico (10 pp.), Colectânea de Problemas: Enunciados (9 pp.) e Resoluções (100
pp.). 1998/99/00. Textos de apoio às aulas teóricas e teórico-práticas de Matemática
Aplicada à Engenharia Mecânica (Curso de Mestrado). (Divulgação restrita aos
estudantes).
7.
ANDRÉ, J.C.S., Apresentação conjunta das Cadeiras de Matemática Aplicada à
Engenharia Mecânica e Modelação de Fenómenos Físicos (8 pp.), Conceitos e
Métodos Gerais da Matemática Aplicada: Metodologia geral de abordagem de
384
problemas (11+21 pp.), Construção e utilização de algoritmos (12 pp.). 1998/99/00.
Textos de apoio a aulas teóricas do Curso de Mestrado
8.
ANDRÉ, J.C.S., M. Mateus and M. C. G. Silva, “Cálculo do isolamento acústico de
paredes compostas: revisão e generalização do modelo de London” (17 pp.). Mar
2001. Technical report ADAI/DEM-FCTUC.
9.
ANDRÉ, J.C.S., O ensino da matemática no curso de licenciatura em Engenharia
Mecânica do DEM/FCTUC (8+139 pp.). Jun 2000. Relatório interno do
DEM/FCTUC.
10. CHAVES, F. and J.C. Góis, “KD6 report: report on model development”; Relatório
no âmbito do Projecto Europeu Cooperativo EUCLID CEPA 14 - RTP 14.2
Insensitive munitions: modelling and testing, Fevereiro 2001.
11. COSTA J.J., Silva M.C.G. (2004) Final Design of the Evapo-Condenser.
Contribuição da ADAI no 5th Intermediate Report do Projecto Solarstore, ADAI,
Coimbra, Janeiro de 2004.
12. COSTA, J.J. and A.R. Figueiredo, “Numerical Modelling of the Gas-Solid Reaction
– a simplified formulation of the coupled heat and mass transfer”, technical report
of ADAI contribution, presented at the 1rst progress meeting of project
SOLARSTORE, Perpignan, France, December 3, 2001.
13. COSTA, J.J. and Silva, M.C.G. (2003) “Design and Test of the Heat Exchanger.
Contribuição da ADAI no 4th Intermediate Report do Projecto Europeu
SOLARSTORE, IMP-CNRS, Perpignan, Julho de 2003.
14.
COSTA, J.J. and Silva, M.C.G. (2003) Numerical modelling of the gas-solid reaction – code
validation for the selected salt”, contribuição da ADAI no 3rd Intermediate Report do
Projecto Europeu SOLARSTORE, ADAI, Coimbra, em 16-17 de Janeiro de 2003.
15. COSTA, J.J. e Gameiro Silva, M.C.(2002) Numerical Modelling of the Gas-Solid
Reaction – code validation. Relatório técnico da contribuição da ADAI (Partner nº
3), apresentado na segunda reunião intercalar do projecto europeu SOLARSTORE,
em Manchester, Inglaterra, 17 de Julho de 2002
16. FERREIRA, A.D. (2002) Calibração de Tubos de Pitot Tipo S, Relatório Técnico
para o ISQ – Instituto de Soldadura e Qualidade, ADAI-EVRT-0202, Julho de
2002, 7 páginas.
17. FERREIRA, A.D. (2002) Estudo das Condições de Escoamento no Aeroporto de
Santa Catarina - Madeira: Simulação em Túnel Aerodinâmico. Relatório Técnico
produzido para o LNEC, ADAI-EVRT-0102, Março de 2002, 23 páginas.
18. FERREIRA, A.D. and D.X. Viegas, “Estudo das perdas de carvão durante o seu
transporte em vagões semi-fechados” – Preliminar Report, ADAI - EVRP – 9901,
25 p., Sept. 1999.
19. FERREIRA, A.D. and I.N.S Monteiro, “Ensaio do depósito de água da câmara
municipal de Albergaria-a-Velha”, technical report ADAI-EVRT-0101, 30 p.,
March, 2001.
385
20. FERREIRA, A.D.; F. Almeida and E.O. Fernandes, “Circulação Atmosférica e
Espaço Urbano - Estratégia Global para a Energia e Ambiente”, Edição da Parque
EXPO'98 S.A., ISBN - 972-8521-17-0, 24 p., 2001.
21. FERREIRA, A.D.; P.M. Vaz, and I.N.S Monteiro, “Estudo das perdas de carvão em
vagões abertos e semi-tapados: Simulação em túnel aerodinâmico”, technical
report ADAI-EVRT-0102, 26 p., July, 2001.
22. GÓIS, J.C. (2003) Relatório do Comportamento Térmico da Mistura de Nitrato de
Amónio+Preparado de Sulfato (Zn, Fe, Mn, Mg …)”, serviço ADP-Adubos de
Portugal. Relatório LEDAP 20030919, Setembro 2003.
23. GÓIS, J.C., “Final report”; in the scope of the Project EUCLID CEPA 14 - RTP
14.2 Insensitive munitions: modelling and testing, November, 2001.
24. GÓIS, J.C., “WP3 report”; technical report in the scope of the Project EUCLID
CEPA 14 - RTP 14.2 Insensitive munitions: modelling and testing, March, 2001.
25. LAPA, J. P. and R.P. Dias, “Escoamentos Bifásicos: Colisões elásticas e saltação”,
Relatório da disciplina de “Seminário” da Lic. Eng. Mecânica. Universidade de
Coimbra, Julho de 2001.
26. LOPES, A.M.G. (2002) Cálculo da Distribuição de Ventos na Região de Peniche.
Relatório interno ADAI-CLRT-0201, 2002.
27. LOPES, A.M.G. (2002) Simulação Numérica do Campo de Ventos no Aeroporto de
Santa Catarina – Madeira. Relatório interno ADAI-CLRT-0202, 2002.
28. LOPES, A.M.G. e Carvalheira, P.F.V. (2002) CFX-5 Delivers Optimized Fuel
Economy – CFX Update, n.º 22.
29. LOPES, A.M.G., “Firestation – User’s Manual”, Technical report ADAI, 45 pp.,
October 2000.
30. LOPES, A.M.G.; D.X. Viegas; A.J. Silva; C. Borrego; A. Carvalho; A.I. Miranda
and M. Tomé, “Wind models validation” – Deliverable D.6, Project INFLAME,
December 2000.
31. MELIKOV, I. Care; T. Sefker; Z. Popiolek; W. Kierat; Y. Zhang, M.G. da Silva,
A.M. Olim - Report ET-IE2000-0, Final Technical Report of EU Project SMT4CT97-2172 “Accuracy of Draught Measurement”, ed. by A. Melikov, International
Centre for Indoor Environment and Energy, Technical University of Denmark,
April 2000.
32. MENDES, R. (2003) Slapper system. Portuguese report contribution to the WP1000
of ERG114.009, Coimbra 11-12 December 2003.
33. MENDES, R. and J. Campos (2003) Oxidação de partículas de Al no processo de
detonação da matriz de emulsão”, Relatório LEDAP, 20030606, Junho 2003.
34. MENDES, R. and J. Campos, “Initiation tests of the PETN and RU-81”, 8th expert
meeting (last), Istanbul, Turkey, 8 Nov. 2001
35. MENDES, R.; P. J. Mendes and J. Campos, “Exploding foil initiator modelling”, 7th
expert meeting, DERA, Fort Halsthead, UK, 1 Feb. 2001.
386
36. OLIVEIRA, A.V.M., Quintela, D.A. and Gaspar, A. (2003) Avaliação da Exposição
ao Frio em Locais de Trabalho – Distribuição Alimentar, Coimbra, ADAI-CECAT,
R.I. – ATF 2, Janeiro de 2003, 21 pg.
ao Frio em Locais de Trabalho – Cooperativa Agrícola, Coimbra, ADAI-CECAT,
R.I. – ATF 3, Janeiro de 2003, 17 pg.
R.I. – ATF 4, Fevereiro de 2003, 23 pg.
ao Frio em Locais de Trabalho – Lota, Coimbra, ADAI-CECAT, R.I. – ATF 7,
Março de 2003, 15 pg.
ao Frio em Locais de Trabalho - Indústria de Congelados de Peixe, Coimbra,
ADAI-CECAT, R.I. – ATF 8, Março 2003, 13 pg.
R.I. – ATF 9, Março de 2003, 18 pg.
ao Frio em Locais de Trabalho – Comércio e Indústria de Peixe, Coimbra, ADAICECAT, R.I. – ATF 10, Abril de 2003, 16 pg.
ao Frio em Locais de Trabalho – Comércio de Produtos Alimentares Congelados,
Coimbra, ADAI-CECAT, R.I. – ATF 11, Maio de 2003, 13 pg.
ao Frio em Locais de Trabalho – Entreposto Comercial de Carnes, Coimbra, ADAICECAT, R.I. – ATF 12, Maio de 2003, 18 pg.
ao Frio em Locais de Trabalho – Comércio de Produtos Alimentares Congelados,
Coimbra, ADAI-CECAT, R.I. – ATF 13, Maio de 2003, 14 pg.
ao Frio em Locais de Trabalho – Entreposto Comercial de Carnes, Coimbra, ADAICECAT, R.I. – ATF 14, Maio de 2003, 18 pg.
387
ao Frio em Locais de Trabalho – Entreposto Frigorífico, Coimbra, ADAI-CECAT,
R.I. – ATF 16, Junho de 2003, 10 pg
ao Frio em Locais de Trabalho – Comércio e Indústria de Carnes, Coimbra, ADAICECAT, R.I. – ATF 17, Julho de 2003, 19 pg.
ao Frio em Locais de Trabalho – Comércio de Peixe, Coimbra, ADAI-CECAT, R.I.
– ATF 18, Julho de 2003, 12 pg.
ao Frio em Locais de Trabalho – Barco de Pesca, Coimbra, ADAI-CECAT, R.I. –
ATF 19, Julho de 2003, 11 pg
53. OLIVEIRA, A.V.M., Quintela, D.A. and Gaspar, A. (2003) Avaliação do Isolamento
Térmico Básico – Bata de Cirurgia, Coimbra, ADAI-CECAT, R.I. – ITV 01,
Outubro de 2003, 15 pg.
ao Frio em Locais de Trabalho – Indústria de Lacticínios, Coimbra, ADAI-CECAT,
R.I. – ATF 20, Novembro de 2003, 16 pg.
ao Frio em Locais de Trabalho – Distribuição Farmacêutica, Coimbra, ADAICECAT, R.I. – ATF 21, Dezembro de 2003, 16 pg.
56. OLIVEIRA, A.V.M., Quintela, D.A. and Gaspar, A. (2003) Avaliação do Isolamento
Térmico Básico – Fatos para Motociclistas, Coimbra, ADAI-CECAT, R.I. – ITV
02, Dezembro de 2003, 20 pg.
57. OLIVEIRA, A.V.M., Quintela, D.A. and Gaspar, A. (2003) da Exposição ao Frio em
Locais de Trabalho – Matadouro, Coimbra, ADAI-CECAT, R.I. – ATF 15, Maio de
2003, 14 pg.
58. PEREIRA, R.E, “Estudo da viabilização da mudança arquitectónica da ala Norte do
Departamento de Engenharia Mecânica do Pólo II em Coimbra”. Relatório da
disciplina de Seminário da Lic. Em Eng. Mecânica, Universidade de Coimbra,
Outubro de 2001. Este trabalho foi objecto de uma comunicação aceite para
apresentação no Encontro Refrigeração/Climatização – Ensino Superior, no âmbito
da Expoclima 2002, Parque das Nações, Lisboa, 21 de Abril de 2002.
59. PIRES, P.X.; Gaspar, A.R.E Quintela, D.A. (2003) Relatório Técnico do Estudo da
Dispersão Atmosférica das Emissões Gasosas de Unidades de Atomização – Caso
de uma Empresa Produtora de Matérias Primas para a Indústria Cerâmica. ADAICECAT, Coimbra, Maio, 2003.
60. PLAKSIN, I. (2003) Meso-scale and micro-scale optical metrology for detonation
tests: Bibliography Review, Portuguese report contribution to the WP1000 of
ERG114.009 Programme Particle processing and characterization, Coimbra 11-12
December 2003.
388
61. PLAKSIN, I. (2003) Optical metrology for detonation tests of micro-samples. Microgap test combined with multi-channel optical analyzer, Portuguese report
contribution to the WP1000 of ERG114.009 Programme Particle processing and
characterization, Coimbra 11-12 December 2003.
62. PLAKSIN, I. (2003) Optical metrology for detonation tests of micro-samples. Microgap test combined with multi-channel optical analyzer”, Portuguese report
contribution to the WP1000 of ERG114.009, Coimbra 11-12 December 2003.
63. PLAKSIN, I., Campos, J. and Direito, J. (2003) Final report on contract LEDAPLANL JK-IP020927”. Award Awd PON57162-001-03 9Z. LEDAP report
10072003, July 2003.
64. PLAKSIN, I., Campos, J. and Mendes, R. (2003) Scope of Portuguese contribution to
ERG114.009 Program LEDAP MED FCTUC”. Report of LEDAP to ERG 114.009
meeting, TNO-PML, Rijswijk. LEDAP report 20030513, May 2003.
65. PLAKSIN, I., Campos, J., Mendes, R. and Direito, J. (2003) LEDAP contribution to
the Florest Test instrumentation”, 1st report on contract LEDAP-LANL JKIP020927. Award Awd PON57162-001-03 9Z. LEDAP report 20030127, January
2003.
66. PLAKSIN, I., Direito, J. (2003) Risks of detonation jets in blasting operations”,
Report based on review of experimental studies, LEDAP-DEM/FCTUC, Coimbra,
May29th, 2003.
67. PLAKSIN, I., Direito, J. (2003) Stability and reliability of emulsion explosives in
blasting operations”, Report based on review of experimental studies, LEDAPDEM/FCTUC, Coimbra, May29th, 2003.
68. PLAKSIN, I., J. Direito, J. (2003) Effect of shear stress in shock initiation of
PLBAN-128 by sineshock wave generator”, 2nd report on contract LEDAPNWSC-IH IP-SC-020612, LEDAP 2003.04.03, Coimbra.
69. PLAKSIN, I., J. Direito, J. (2003) Effect of shear stress in shock-spot initiation of
three PBX compositions based on HMX and RDX PLBXN-110, PLBXN-109 and
PLBXN-111”, Report on points sand 6 of statement of work, contract LEDAPNWSC-IH IP-SC-020612, LEDAP 2003.0906 Coimbra.
70. QUINTELA, D.A.,“Actividades desenvolvidas pelo CECAT”, título do relatório de
candidatura ao Prémio Agostinho Roseta instituído pelo IEFP, 15 pp, Maio de 2001.
71. RIBEIRO, J. (2003) Sliced microsamples a suitable configuration for the dynamic
particle characterization” Portuguese report contribution to the WP1000 of
ERG114.009, Coimbra 11-12 December 2003.
72. SILVA, M.C. Gameiro; J. J. Costa and G.N. Brites, “Estudo das distribuições de
temperatura e de velocidade no habitáculo de um autocarro Volvo B7L”, technical
report, ADAI, December 2000.
73. SILVA, M.C. Gameiro; J.J. Costa; L.A. Oliveira; L.C. Neto; G.N. Brites and J.
Barbosa, “Estudo aerodinâmico de cortinas de ar”, technical report, ADAI, June
2000.
389
74. SILVA, M.C.G., Mateus M., Martins B. (2003) Mapa de Ruído de Coimbra –
Relatório intermédio elaborado no âmbito do Acordo-Programa celebrado entre a
Câmara Municipal de Coimbra e a Faculdade de Ciências e Tecnologia da
Universidade de Coimbra”, Coimbra, Outubro de 2003.
75. Viegas DX, 2004. Gestosa 2004 News. Bulletin with News and Data on the Gestosa
2004 Field Experiments. Nº1, March 31, 2004.
2004 Field Experiments. Nº2, April 30, 2004.
2004 Field Experiments. Nº3, May 13, 2004.
2004 Field Experiments. Nº4, May 18, 2004.
2004 Field Experiments. Nº5, June 3, 2004.
2003 Field Experiments. Nº1, March 28, 2003.
2003 Field Experiments. Nº2, April 23, 2003.
82. VIEGAS, D.X. (Editor), 1999, “GESTOSA 1998. Shrubland Experimental Fire
General Report”. Report of the INFLAME project. European Commission.
Directorate General XII. Coimbra, March 1999.
83. VIEGAS, D.X. (Editor), 2000. GESTOSA 1999. Shrubland Experimental Fire General
Report. Report of the INFLAME project. European Commission. Directorate
General XII. Coimbra, May 2000.
Acronym / Name
INFLAME
SPREAD
Identification Code
Funding
Entity
ENV4-CT980700
EVG1-CT-200100043
European
Commission
European
Commission
Budget
(€)
Year of Duration
beginning (months)
215431
1998
24
208057
2002
36
390
As Project Partner:
Acronym /
Name
PROMETHEUS
LUCIFER
Displacement
Ventilation of
Workplaces
ADM –
Accuracy of
Draught
Measurement
SOLARSTORE
E-EFIS
ERAS
SHAEP
COMETS
EUFIRELAB
Evaluation of
local thermal
comfort with a
thermal manikin
(
COMETS
EUFIRELAB
MEDIGRID
Identification
Code
ENV4-CT980716
ENV4-CT960320
ICCTI/CNRS423/1998
Funding Entity
European
Commission
European
Commission
ICCTI/CNRS
SMT-CT972172
European
Commission
NNE-200000385
European
Commission
European
Commission
European
Commission
European
Commission
European
Commission
European
Commission
C26789
EVG1-CT2001-00039
EVG1-CT2001-30004
IST-200134304
EVR1-200100054
606.B4
ICCTI/Ambassade
de France
IST-200134304
EVR1-CT2002-40028
Contract
004044
European
Commission
European
Commission
European
Commission
Budget
(€)
Year of Duration
beginning (months)
10126
1998
24
75194
1996
48
748
1998
24
54000
1998
24
151560
2001
48
74600
2001
18
85999
2002
36
85000
2002
24
128959
2002
36
72500
2002
48
3990
2002
11
2002
36
2002
48
2004
24
391
National Projects:
As Leading Partner:
Acronym / Name
CONDOR
GAMA
Analysis of
Thermal Comfort
and Indoor Air
Quality in Displa
CDR
ÁGUIA
WINSLOPE
QUIMERA
COMBISTRESS
A Física e os
Automóveis
Identification Code
3/3.2/FLOR/2129/95
Funding
Entity
FCTPRAXIS
FCT
Budget
(€)
Year of Duration
beginning (months)
3770
1997
36
4988
1998
24
FCT PRAXIS/C/EME/10145/1998 PRAXIS
XXI
62849
1999
40
POCTI/1999/EME/33512/99
Protocolo DGF/ADAI
POCTI/34128/EME/2000
POCTI/34346/99
PCTI/1999/EME/34266
74820
175000
60000
24500
80000
2001
1999
2000
2001
2000
24
24
36
12
36
8500
1999
10
ContractoTejo Energ
28032
1999
12
Ministry
of Defense
230000
1995
84
Ministry
of Defense
246000
1997
48
Ministry
of Defense
105000
1998
48
Ministry
of Defense
250000
2002
48
IDICT
84700
2002
11
PEAM/C/IF/0007/97
PIII-407
Medição à
Escala Real das
ADAI/TE/1999
Perdas de Carvão
de Vagões
Energetic
Materials, RTP1EUCLID-CEPA 14 - RTP1
Clean rocket
propellants
EM - RTP2,
Insensitive
EUCLID-CEPA 14, EMMunitions
RTP2
Modelling and
Testing
EM, JP4EUCLID-CEPA 14-JP4
Ignition Systems
Thales Intensitive
CEPA JP14.11
Munitions
Modelling and Tes
Improvement of air
quality and working
017.CERHAS/01
condition in ceramic
industry
FCT
DGF
FCT
FCT
FCT
Unidade
Ciência
Viva
392
As Project Partner:
Acronym /
Name
Identification Code
CONDOR
3/3.2/FLOR/2129/95
GAMA
Estudos
Aerodinâmicos
sobre o
Aeroporto de
Santa Catarina
Medição da
Distribuição da
Pressão
Estática na
Superfície do
COTEC.
Prevenção de
Incêndios
Florestais
Funding
Entity
FCTPRAXIS
PEAM/C/IF/0007/97
FCT
Budget
(€)
Year of Duration
beginning (months)
3770
1997
36
4988
1998
24
ADAI/LNEC/2001
ContractoLNEC
24940
2001
2
ADAI/UA/2001
ContractoUniv. Avei
3990
2001
1,5
COTEC
2004
24
Patents
International Patents and Prototypes
1.
Figueiredo, N.; Lopes, A.M.G, Costa, V.A.C and Oliveira, A.M.M. – “Dispositivo
Silencioso de Alimentação de Água para Enchimento de um Reservatório para
Aparelhos Sanitários”, Patent OLI32, accredited by " Ministero dellÍndustria del
Commercio e dellÁrtigianato, Ufficio Italiano Brevetti e Marchi - Roma, Italia ",
Italy, December, 2001. Owner: Oliveira e Irmão S.A., Variante da Cidade,
Apartado 705, 3801-851 Aveiro, Portugal. Dates of development: January 2000 –
December 2001.
393
National Patents and Prototypes:
1.
VIEGAS, D. X. and A.R.M. Soares – “Sonda de gradiente para medição da
velocidade num escoamento não uniforme turbulento”, Patent PT102204,
accredited by “Instituto Nacional da Propriedade Industrial, INPI”, Portugal,
August, 2001. Owner: Consortium constituted by the authors. Site for
demonstration: Laboratório de Aerodinâmica Industrial, Rua Pedro Hispano, nº 12,
3030 Coimbra, Portugal. Dates of development: January 1998 – January 2000.
2.
M. C. G. Silva, J. C. F. Mendes (2003), "Medidor Transpirante de Conforto
Térmico", processo de submissão de patente de invenção ao Instituto Nacional da
Propriedade Industrial (INPI).
Prototypes:
Protocols:
ADAI is, since 1996, an accredited laboratory by Instituto Português de Qualidade (IPQ)
in the fields of Vehicle Testing and Acoustics (certificate 96/L.183)
Organization of International Conferences and Courses
1.
IV International Conference on Forest Fire Research/2002 Fire Safety Summit. 18
a 22 de Novembro de 2002.
2.
Short Course on Fire Safety. 16 de Novembro de 2002. Curso internacional
orientado pelo Dr. Richard Mangan, juntamente com outros dois especialistas
internacionais, sobre o problema da segurança pessoal em incêndios florestais.
3.
IV Short Course on Fire Behaviour Modelling. 23 e 24 de Novembro de 2002.
Curso internacional orientado pela Dr. Wendy Catchpole, juntamente com quatro
outros docentes, sobre a previsão do comportamento do fogo em situações
particularmente relacionadas com a segurança pessoal em incêndios florestais.
4.
9th International Conference on Air Distribution in Rooms – ROOMVENT 2004,
Universidade de Coimbra, 5 a 8 de Setembro de 2004.
394
Organization of Short Courses
1.
Curso de Especialização sobre Conforto Térmico pelo Prof. Thomas Lund Madsen
da Technical University of Denmark, no DEM-FCTUC, Coimbra, 1-2 de Junho de
1999.
2.
Seminário sobre “Soluções Inteligentes para Teste e Aquisição de Dados”
leccionada por especialistas da empresa Keithley no DEM-FCTUC, Coimbra,
Junho de 1999.
3.
Palestra sobre Modelos Adaptativos de Conforto Térmico pelo Prof. Richard de
Dear, da Macquarie University de Sydney – Australia, DEM-FCTUC, Coimbra, 8
de Janeiro de 2001.
4.
Palestra sobre Qualidade do Ar em Edfícios no Século XXI , pelo Prof. Povl Ole
Fanger da Technical University of Denmark –, DEM-FCTUC, Coimbra, 5 de Junho
de 2001.
5.
Curso de Introdução ao Ruído, leccionado, com a duração total de 30 horas.
Promovido pela ADAI, o curso teve três edições durante o ano de 2002 (1-5 de
Julho , 7-10 Outubro e 16-19 Dezembro)
6.
Palestra sobre Conforto Ambiental, leccionada pela Profª Anésia Frota da
Faculdade de Arquitectura da Universidade de S. Paulo. DEM-FCTUC, 24 de
Março de 2004
7.
- Seminário sobre Segurança Pessoal em Incêndios Florestais. Auditório do
Departamento de Engenharia Mecânica. 20 de Fevereiro de 2004 .
8.
- Seminário sobre Incêndios Florestais junto de Habitações. Comissão de
Coordenação da RC. 15 de Março de 2004.
9.
- Palestra subordinada ao tema: “Experimental and Numerical Modelling of
Marginal Burning in Live Chaparral”, por Dr. Shankar Mahalingam, da
Universidade da Califórnia, Riverside, EUA. 7 de Abril 2004
10. Palestra subordinada ao tema:“The Bushfire Cooperative Research Centre Innovative Collaboration Between Fire Agencies and Researchers", por Dr. Kevin
O'Loughlin, do Bushfire Cooperative Research Centre (Australia), 1 de Junho 2004
11. Palestra subordinada ao tema “Centro de Estudios del Riesgo Tecnológico
(CERTEC) - 13 años de investigación sobre el análisis de riesgo", por Prof. Josep
Arnaldos da Universidade Politécnica de Barcelona, 5 de Julho de 2004.
395
MARETEC
Books:
Books Chapters:
1.
Eça, L. Vaz, G.B., Falcão de Campos, J.A.C., Hoekstra, M., “A Verification of Calculations
of the Potential Flow Around 2D Foils”. Accepted for publication in the AIAA Journal in
2004.
2.
Eça L., Hoekstra M., “On the Grid Sensitivity of the wall boundary condition of the kturbulence model” Accepted for publication in the Journal of Fluids Engineering in 2004.
3.
Falcão de Campos, J.A.C., Ferreira de Sousa, P.J.A., Bosschers, J., “A Verification Study
on Low-Order Three-Dimensional Potential-Based Panel Codes”, Accepted for publication
in the International Journal of Computers and Fluids in 2004.
4.
Cruz, J. M. B. P. abd Sarmento, A J. N. A, Wave Energy Absorption by a Submerged
Sphere of Variable Radius With a Single Point Moored Tension Line, accepted for
publication in the International Journal of Offshore and Polar Engineers in April 04.
5.
Falcao, A.F. de O., "Stochastic modelling in wave power-equipment optimization: maximum
energy production versus maximum profit". Ocean Engineering, Vol. 31, pp. 1407-1421,
2004.
6.
Vaz, G., Falcão de Campos, J.A.C., Eça, L. (2003) “A Numerical Study on Low and Higher
Order Potential Based BEM for 2D Inviscid Flows”, Computational Mechanics, 32 No. 4-6,
December 2003, pp. 327-335.
7.
Sarmento, A.J.N.A.; Brito-Melo, A. and Pontes, T., The Influence of the Wave
Climate on the Design and Annual Production of Electricity by OWC Wave Power
Plan

Publications 99-04 - idmec

Transcrição

Documentos relacionados

Engenharia da Computação

Engenharia da Computação

BEMVINDO AO CAMOSUN COLLEGE

TWO STEPS TO CHANGE YOUR LINKEDIN ASSOCIATION

evento - Combat Sport

Apresentação do PowerPoint

here - Escola de Artes, Ciências e Humanidades

Seminário Método de Análise Espacial no Estudo de - IESP-UERJ

Apresentação do PowerPoint

relatório - Instituto IP