Program - CFD OIL 2014

2014
6th Latin American CFD Workshop Applied to the Oil and Gas Industry
6
th
edition
Program
December 02, 2014
Windsor Florida Hotel - Rio de Janeiro - Brazil
Organization
Sponsor
Agência Nacional
do Petróleo,
Gás Natural e Biocombustíveis
2014
6th
edition
6th Latin American CFD Workshop Applied to the Oil and Gas Industry
KEYNOTE SPEAKERS
Ellen Meeks, Ph.D.
Development Director
ANSYS, Inc.
Dr. Meeks has led product development and engineering services for more than 15 years at Reaction
Design, including oversight of all major software releases, industry consortia, and several governmentfunded research projects. She was one of the principal developers of the CHEMKIN Software.
Carlos Alberto Capela Moraes, Dr.
Technical Consultant
PETROBRAS
Dr. Capela is graduated in Civil Engineering at Polytechnic School of the University of São Paulo
(USP), with a Master’s in Chemical Engineering, and Ph.D. in Mechanical Engineering from Coppe /
UFRJ. Dr. Capela joined Petrobras in 1978. Since then, he has been coordinating different projects of
basic engineering and research and development, focused on Primary Processing of Petroleum. He
also specializes in phase separation and cyclonic technology.
Yutaka Tsuji, Dr.
Professor
Osaka University
Dr. Tsuji is a professor emeritus of Osaka University. He received the B.E. and M.E. degrees in
Aeronautical Engineering at University of Osaka Prefecture and the D.E. degree in Mechanical
Engineering at Osaka University. Since 2006 he is the chair person of the international Liaison
Committee of APPIE (Association of Powder Process Industry and Engineering). His research field is
measurement and numerical analysis of gas-particle multiphase flows.
Humberto Hinojosa, Ph.D.
Reservoir Specialist
GRUPO SSC
Dr. Hinojosa has Master’s and PhD. degrees in Chemical Engineering from Universidad Nacional
Autónoma de México. He has experience in research and development applied to reservoir fluids
properties calculation and process simulation. He also worked in several projects with PEMEX, using
CFD applied to flow assurance processes.
2014
6th
6th Latin American CFD Workshop Applied to the Oil and Gas Industry
edition
PROGRAM
8:00
REGISTRATION OPEN
9:00
Applications of Reactive Flow Modeling in the Oil & Gas Industry
Ellen Meeks, Ph.D. - ANSYS, Inc.
9:40
Use of CFD for Design and Research of Operating Conditions of SSAO Project at Marlim Field
Carlos Alberto Capela Moraes, Dr. - PETROBRAS
10:20
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
11:00
Numerical Analysis of Dense Phase Gas-Solid Flows (Modelling and Applications)
Yutaka Tsuji, Dr. - Osaka University
11:30
PVT Module Coupled with ANSYS CFD – Case Studies
Humberto Hinojosa, Ph.D. - GRUPO SSC
12:10
LUNCH
Room
GUANABARA
EXCELSIOR
13:40
ANSYS-CFD Applied to the Oil Industry in Mexico
Luis Fernando López Cisneros - PEMEX-PEP
CFD Code Validation via Ultra-reduced Model Testing
in LOC - COPPE / UFRJ
Antonio Carlos Fernandes - COPPE / UFRJ
14:10
Atomizers Simulation: A Model Validation for Industrial Cases
Rodrigo Bernardo Medeiros - PETROBRAS / ESSS
CFD Modeling of the Effect of Wall Proximity on Vortex Shedding
Érico Almeida Santos - PETROBRAS
14:30
CFD Investigation on the Influence of Turbulence Models for GasSolid Flow in a Circulant Fluidized
José Luis Gomez Vergel - UNICAMP
Ultrasonic Flow Meter: How Line Dimensions Can Impact Quality of
Measurement
Amanda Briggs - PETROBRAS / ESSS
14:50
Lifecycle Management: Increasing IT Productivity and Efficiency
Alaor Neto - Planus
Derfel Methodology for Detectors Allocation in Industrial Areas
Igor Ribeiro de Souza - Safe Solutions Engenharia
15:10
A CFD Methodology for Modelling the Cool Down Process
in a 3-Phase Subsea Separator Tank
Patrick Farias - FMC Technologies
High Performance Computing for Oil and Gas Industry
Paul Holzhauer - NVIDIA
15:30
Numerical Simulation of a Plate Heat Exchanger
Rodrigo Peralta - PETROBRAS / ESSS
Simulation of the Dissociation of a Hydrate Plug in Horizontal Lines
Leandro Saraiva Valim - PETROBRAS
15:50
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
16:20
Comparison Between Single and Coupled Cyclone Simulations,
Mass Transfer in Multicomponent Gas-Liquid Flow in a Microdevice
Evaluating the Influence of the Nonuniformity Velocity Profile at Inlet.
Natan Padoin - UFSC
Rodrigo Bernardo Medeiros - PETROBRAS / ESSS
16:40
Hardware Solutions for Oil and Gas Industry
Edson Almeida - Lenovo
A numerical Study and Analysis of the Reactive Flow of a
Microturbine Combustor with a Rotating Casing
Diogo Dantas Ribeiro - PETROBRAS
17:00
Improving the Efficiency of Oil Desalters Through Variations in
Geometric Parameters
Guilherme Pimentel - PETROBRAS
CFD Modeling of the Combustion Gases of a Ground Flare and the
Dispersion of Pollutants Generated
Paulo Roberto Pagot - PETROBRAS
17:20
Optimization of a Cross-Flow Heat Exchanger
Brayan Marcelo Paredes - ESSS
Nitrogen Oxides Selective Non Catalytic Reduction (SNCR) in
Industrial Furnaces Regarding Back Mixing Effect
Fernando César Lopes de Oliveira - PETROBRAS
17:40
CFD Simulation of Non-Newtonian Flow Inside a Mixing Tank
Maribel Valverde Ramirez - UFSCAR
CFD Study of a Higher Stack Displacement than Expected by Design
Ana Paula da Silva Faria - ESSS
18:00
CLOSING SESSION
Plenary Session
Technical Keynote Speakers
Technical Session
2014
6th
edition
6th Latin American CFD Workshop Applied to the Oil and Gas Industry
uu DECEMBER 03
TRAINING COURSE
Integrated Computational Method for Reaction and Combustion Modeling
Contents:
1. Introduction to Reaction Design solutions for combustion systems:
Chemkin Pro, Energico and Reaction Workbench;
2. Hands-on Chemkin Pro simulation;
3. A brief overview of reacting flow simulation on ANSYS CFD;
4. Hands-on Fluent and Chemkin Pro coupling.
Venue
ESSS Office
Address: Av. Presidente Vargas, 3131 - 12º floor - room 1203
City: Rio de Janeiro/RJ
CEP: 20210-031
Instructors: Ellen Meeks, Ph.D. - ANSYS, Inc.
Raphael Aquilino Bacchi, M.Sc. – ESSS
Date: December 03, 2014
Duration: 08 hours
Investment: R$ 1.150,00 (20% discount for students).