PP - Braskem

Polyolefins
products and properties
Europe
September 2013
PP • Polypropylene
Braskem: expanding horizons with products
and services
Braskem, the leading producer of thermoplastic resins in the Americas and the world’s
largest producer of biopolymers, has constantly innovated by launching new products in
partnership with Clients, bringing about improvements to society and the environment.
With installed resin production capacity of over 7 million tons a year, Braskem has supported
the plastic chain by developing more modern and innovative products, sponsoring
expositions and events related to the plastics industry and by providing technical know-how
and defending the manufacturing industry.
Braskem constantly invests in expanding production capacity - whether through
acquisitions, or by opening new plants, such as the recently inaugurated units, in Alagoas to
produce PVC. Investments of over R$ 1 billion went into these projects, mobilizing diverse
sectors of the economy, especially local players.
Investments are not restricted to Brazil alone. In 2011 Braskem aquired two PP plants
in Europe, Schkopau and Wesseling. Braskem also invests in other projects across Latin
America: the Ethylene XXI project is a petrochemical complex installed in Mexico in
partnership with Idesa, which will supply 1 million tons/year of polyethylene to the market.
Investments of around US$ 4.5 billion have gone into this project, which is expected to start
production in 2015.
The global presence does not translate merely into investments. The operational synergy
between Braskem’s plants and offices around the world enables it to better meet the
growing needs of both our global and local Clients through the supply of products and
services.
Nomenclature
PP
HOMO = Homopolymer
RACO = Random Copolymer
Besides offering products and services that promote sustainability, Braskem constantly
monitors and seeks ways to reduce water and energy consumption, as well as waste and
effluent generation, further reducing the environmental impact of its operations in Brazil
and around the world.
Innovation, technology, sustainability and the unceasing quest for the best way to serve
translate into dreams come true for Clients, and in each new partnership, Braskem creates
new ways to look at the world
This information reflects typical values obtained
in our laboratories, but should not be considered
as absolute or as warranted values.Only the
properties and values mentioned on the Certifi
cate of Quality are considered as guarantee of the
product.
Rotterdam
Wesseling
Frankfurt
The mentioned values in this report can be
changed at any moment without Braskem
previous communication.
Vienna
Braskem does not recommend the use of its
products for storage or contact with parenteral
solutions, except where explicitly indicated.
For usage doubts or to discuss other applications,
contact our Technical Service Engineers.
Schkopau
Europe Headquarters
Manufacturing Units
Offices
PP • Polypropylene
PP • Polypropylene
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
Units
g/10min
g/cm
3
MPa
MPa
%
kJ/m²
kJ/m²
1.5
0.900
1300
27
7
18
6
DC7061.01
D153.00
Inspire 153
C7056-03
DC7056.05
C7057-07
Impact Copolymer
DC7057.01
C715-12NHP
C765-15NA
C706-21NAHP
C791-30NA
C7082-30NA
C7070-35N
C705-44NAHP
Inspire702
DC705.01
C711-70RNA
DC707.01
C7069-100NA
ISO 75-2/B
o
C
0.900
1300
27
7
18
6
0.900
1400
28
9
7.5
2.5
0.900
1400
28
9
7.5
2.5
3.5
0.900
1150
26
10
12
5
ISO 179-1/1eA
Units
g/10min
g/cm
MPa
MPa
%
kJ/m²
7
0.900
1700
35
9
4
94
34
13
4.5
112
1200
32
13
5
110
1200
32
13
5
110
1700
35
8
3.8
97
35
8
3.5
100
DH735.01
H733-07
H357-09RSB
86
3.5
0.900
1150
26
10
12
5
88
Durable goods, thermoforming, rigid packaging
7
0.900
1200
26
10
10
3
88
Rigid packaging, consumer goods, automotive, general compounding
7
0.900
1300
27
6
10
5
95
Rigid packaging, consumer goods, automotive, general compounding
12
0.900
1450
24
8
10
4.5
100
26
10
12
6.5
90
27
8
8
4.5
100
1300
26
9
7
3
96
1300
25
5
8.5
5
98
1350
25
5
6.5
4.5
85
1450
28
7
7
4
100
1350
25
42
6
3
90
1400
28
40
7
4
97
Rigid packaging, consumer goods, automotive, general compounding
15
0.900
1200
Rigid packaging, consumer goods, automotive, general compounding
21
0.900
1450
Thin wall packaging, consumer goods, other injection moulding articles
30
0.900
Thin wall consumer goods, thin wall rigid packaging
30
0.900
Thin wall consumer goods, thin wall rigid packaging
35
0.900
Thin wall consumer goods, thin wall rigid packaging
44
0.900
Thin wall consumer goods, thin wall rigid packaging
44
0.900
Thin wall consumer goods, thin wall rigid packaging
50
0.900
Thin wall consumer goods, thin wall rigid packaging, high flow, excellent organoleptic properties
70
0.900
1250
24
7
8
4
95
1300
24
5
6
3
95
5
4
2.5
105
Thin wall consumer goods, thin wall rigid packaging
70
0.900
Thin wall consumer goods, thin wall rigid packaging, very high flow, excellent organoleptic properties
100
0.900
1580
Thin wall consumer goods, thin wall rigid packaging, very high flow resin
28
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
ISO 527-2
86
88
Charpy Notched
Impact Strength
(23°C)
ISO 527-2
95
Durable goods, thermoforming, rigid packaging
Tensile Strain (%)
ISO 178
3
Durable goods, thermoforming, rigid packaging
2.3
Tensile Stress (MPa)
ISO 1183
95
Durable goods, thermoforming, rigid packaging
Flexural Modulus
(MPa)
ISO 1133
Durable goods, thermoforming, rigid packaging
2.3
Density
ISO Method
Durable goods, thermoforming, rigid packaging
1.5
Melt Flow Rate
Typical Properties
HOMO
C7061-01N
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
Typical Properties
Injection Molding
Melt Flow Rate
Injection Molding
DH357.01
DH742.01
DH765.01
H734-52RNA
DH789.01
ISO 75-2/B
o
C
Rigid packaging, cosmetic packaging, excellent organoleptic properties
7.5
0.900
1300
Rigid packaging, consumer goods, automotive, general compounding
9.5
0.900
Film for flexible and rigid food packaging, textile applications
9.5
0.900
Film for flexible and rigid food packaging, textile applications
12
0.900
Rigid packaging, cosmetic packaging, excellent organoleptic properties
25
0.900
1650
Rigid packaging, consumer goods, general compounding, excellent organoleptic properties
52
0.900
1600
37
9
2.5
105
1700
35
8
2.5
100
Thin wall consumer goods, thin wall rigid packaging
50
0.9
Thin wall consumer goods, thin wall rigid packaging, high flow, excellent organoleptic properties
PP • Polypropylene
PP • Polypropylene
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
ISO 75-2/B
ASTM D1003
Units
g/10 min
g/cm3
MPa
MPa
%
kJ/m²
kJ/m²
°C
%
10
0.900
1050
28
12
7
2.5
80
12
1200
28
12
6
2.5
80
12
30
11
6
2
80
11
30
11
6
2
80
11
28
12
6
2
83
12
28
12
6
2
83
12
Rigid packaging, consumer goods, general compounding
25
0.900
1200
0.900
1050
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
g/10min
g/cm
MPa
MPa
%
kJ/m²
kJ/m²
0.8
0.900
1000
24
15
55
8
85
1000
24
15
55
8
85
1150
26
10
12
5
88
1150
26
10
12
5
88
Rigid packaging, consumer goods, general compounding
42
Tensile Stress (MPa)
Units
Inspire137
ISO 75-2/B
o
C
Flexible packaging, speciality film, durable sheets
0.8
D137.00
0.900
Flexible packaging, speciality film, durable sheets
3.5
Inspire 136
0.9
Flexible packaging, speciality film
3.5
DC7056.05
0.9
Flexible packaging, speciality film
Thin wall consumer goods, thin wall rigid packaging, high flow
42
0.900
1050
Thin wall consumer goods, thin wall rigid packaging, high flow, excellent organoleptic properties
70
0.900
1060
30
13
5
2
83
11
30
13
5
2
83
11
Thin wall consumer goods, thin wall rigid packaging, high flow
70
0.900
1060
Blown Film
Thin wall consumer goods, thin wall rigid packaging, high flow, excellent organoleptic properties
Typical Properties
Haze (39.4 mil
(1000 μm)
D382.01
1060
ISO 179-1/1eA
Charpy Notched
Impact Strength
(23°C)
D382.00
0.900
ISO 179-1/1eA
Tensile Strain (%)
D364.01
20
ISO 527-2
Tensile Stress (MPa)
Inspire 364
Rigid packaging, cosmetic packaging, excellent organoleptic properties
ISO 527-2
3
Flexural Modulus
(MPa)
DR7037.01
0.900
ISO 178
Density
RACO
DR7037.00
10
ISO 1183
Melt Flow Rate
DR7051.01
Rigid packaging, cosmetic packaging
ISO 1133
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179/eA
ISO 179-1/1eA
ISO 75-2/B
ASTM D1003
Units
g/10 min
g/cm3
MPa
MPa
%
kJ/m²
kJ/m²
°C
%
1.8
0.900
840
25
12
18
5
81
12
1100
30
10
8.5
2.5
79
12
Inspire 361
Inspire 152
RACO
R7051-10N
ISO Method
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
ISO 1183
Charpy Notched
Impact Strength
(0°C)
ISO 1133
Impact Copolymer
ISO Method
Flexural Modulus
(MPa)
Typical Properties
Density
Haze (39.4 mil
(1000 μm))
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(0°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
Melt Flow Rate
Typical Properties
Melt Flow Rate
Blown Film
Injection Molding
DR152.00
DR152.02
DR155.01
DR155.02
Flexible packaging, speciality film
2
0.900
Flexible packaging, speciality film, high transparency, excellent organoleptic properties
2
0.900
1100
30
10
8.5
2.5
79
12
1100
30
10
8.5
2.5
79
25
26
12
15
4
70
12
12
15
4
70
25
Flexible packaging, speciality film
2
0.900
Flexible packaging, speciality film, excellent organoleptic properties
2
0.900
900
Flexible packaging, speciality film, high transparency, excellent organoleptic properties
2
0.900
900
Flexible packaging, speciality film, excellent organoleptic properties
26
PP • Polypropylene
PP • Polypropylene
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
Units
g/10min
g/cm
MPa
MPa
%
kJ/m²
kJ/m²
0.5
0.900
1600
31
9
68
8
105
1000
24
15
55
8
85
1000
24
15
55
8
85
1300
27
7
18
6
95
1300
27
7
18
6
95
1300
27
7
18
6
95
ISO 75-2/B
o
C
0.900
Rigid packaging, consumer food and non-food goods
0.8
0.900
Rigid packaging, consumer food and non-food goods
1.3
C123-01N
0.900
Rigid packaging, consumer goods, durable goods
1.5
DC7061-01N
0.900
1.5
0.900
Rigid packaging, consumer goods, durable goods
Haze (39.4 mil
(1000 μm)
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(0°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
Melt Flow Rate
Blow Molding
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
ISO 75-2/B
ASTM D1003
Units
g/10 min
g/cm3
MPa
MPa
%
kJ/m²
kJ/m²
°C
%
2
0.900
1100
30
10
8.5
2.5
79
12
1100
30
10
8.5
2.5
79
12
900
26
12
15
4
70
12
DR155.01
RACO
Rigid packaging, high transparency, excellent organoleptic properties
2
0.900
Rigid packaging, high transparency
2
0.900
Rigid packaging, high transparency, excellent organoleptic properties
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
Units
g/10min
g/cm
3
MPa
MPa
%
kJ/m²
kJ/m²
1.3
0.900
1300
27
7
18
6
95
1300
27
7
18
6
95
1300
27
7
18
6
95
1150
26
10
12
5
88
1150
26
10
12
5
88
1600
35
11
5.5
35
120
2100
45
10
3.5
30
123
C123-01N
DC7061-01N
C7061-01N
C7056-03
DC7056.05
Rigid packaging, consumer goods, durable goods
C7061-01N
DR152.00
ISO 1183
Impact Copolymer
0.8
D137.00
Inspire 152
ISO 1133
Rigid packaging, consumer goods, durable goods
Inspire137
Typical Properties
ISO Method
HOMO
Impact Copolymer
Inspire114EU
3
Typical Properties
Melt Flow Rate
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Flexural Modulus
(MPa)
Density
Typical Properties
Tensile Stress (MPa)
Thermoforming
Melt Flow Rate
Blow Molding
H105-03NA
D234.00
ISO 75-2/B
o
C
Rigid packaging, sheet and thermoforming
1.5
0.900
Rigid packaging, sheet and thermoforming
1.5
0.900
Rigid packaging, sheet and thermoforming
3.5
0.900
Rigid packaging, sheet and thermoforming
3.5
0.9
Rigid packaging, sheet and thermoforming
3.2
0.900
Rigid packaging, sheet and thermoforming
3.2
0.900
Rigid packaging, high stiffness, sheet and thermoforming
PP • Polypropylene
PP • Polypropylene
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
Units
g/10min
g/cm
3
MPa
MPa
%
kJ/m²
kJ/m²
7
0.900
1200
26
10
10
3
88
0.900
1300
27
6
10
5
95
C7057-07
H357-09RSB
DH357.01
o
C
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
Units
g/10min
g/cm
MPa
MPa
%
kJ/m²
kJ/m²
0.5
0.900
1600
31
9
68
8
105
1000
24
15
55
8
85
1000
24
15
55
8
85
1300
27
7
18
6
95
1300
27
7
18
6
95
1300
27
7
18
6
95
1400
28
9
7.5
2.5
86
1400
28
9
7.5
2.5
86
1150
26
10
12
5
88
1150
26
10
12
5
88
1200
26
10
10
3
88
1300
27
6
10
5
95
Inspire114EU
Inspire137
0.900
1200
32
13
5
-
110
D137.00
0.900
1200
32
13
5
-
110
C123-01N
Speciality film
9.5
Flexural Modulus
(MPa)
ISO 1133
Speciality film
9.5
Density
ISO Method
Speciality film
7
DC7057.01
ISO 75-2/B
Speciality film
Impact Copolymer
HOMO
Impact
Copolymer
ISO Method
Typical Properties
Melt Flow Rate
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-20°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Flexural Modulus
(MPa)
Tensile Stress (MPa)
Extrusion
Density
Typical Properties
Melt Flow Rate
Extrusion Film Coating
DC7061-01N
C7061-01N
D153.00
Inspire 153
C7056-03
DC7056.05
C7057-07
DC7057.01
3
ISO 75-2/B
o
C
Extruded consumer goods and durable goods
0.8
0.900
Flexible packaging, speciality film, durable sheets
0.8
0.900
Flexible packaging, speciality film, durable sheets
1.3
0.900
Rigid packaging, consumer goods, durable goods
1.5
0.900
Rigid packaging, consumer goods, durable goods
1.5
0.900
Rigid packaging, consumer goods, durable goods
2.3
0.900
Durable goods, technical moulded goods
2.3
0.900
Durable goods, technical moulded goods
3.5
0.900
Flexible packaging, speciality film
3.5
0.900
Flexible packaging, speciality film
7
0.900
Flexible packaging, speciality film
7
0.900
Flexible and rigid packaging, speciality film
PP • Polypropylene
PP • Polypropylene
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
ISO 179-1/1eA
ISO 179-1/1eA
ISO 75-2/B
ASTM D1003
Units
g/10 min
g/cm3
MPa
MPa
%
kJ/m²
kJ/m²
°C
%
2
0.900
1100
30
10
8.5
2.5
79
12
RACO
DR152.00
DR152.02
DR155.01
DR155.02
0.900
1100
30
10
8.5
2.5
79
0.900
1100
30
10
8.5
2.5
79
0.900
900
26
12
15
4
70
ISO 527-2
ISO 527-2
ISO 179-1/1eA
Units
g/10min
g/cm
MPa
MPa
%
kJ/m²
3.2
0.900
1600
35
11
5.5
120
2100
45
10
3.5
123
1700
35
9
4
94
34
13
4.5
112
1200
32
13
5
110
1200
32
13
5
110
0.900
1500
36
9
4
83
0.9
1700
35
8
3.8
97
1300
30
10
2
80
1300
30
10
2
80
1300
30
10
2
80
1300
30
10
2
80
H105-03NA
12
D234.00
25
DH735.01
12
H733-07
Rigid packaging, high transparency, excellent organoleptic properties
2
0.900
900
26
12
15
4
70
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
ISO 178
Flexible packaging
2
Charpy Notched
Impact Strength
(23°C)
ISO 1183
Rigid packaging, high transparency
2
Tensile Strain (%)
ISO 1133
Rigid packaging, high transparency, excellent organoleptic properties
2
Tensile Stress (MPa)
ISO Method
25
H357-09RSB
Flexible packaging
HOMO
Inspire 152
Flexural Modulus
(MPa)
Typical Properties
Density
Haze (39.4 mil
(1000 μm)
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(-0°C)
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
Melt Flow Rate
Typical Properties
Melt Flow Rate
Extrusion
Extrusion
DH357.01
DH542.01
DH742.01
H502-25RG
DH502.00
H502-25RZ
DH502.01
3
ISO 75-2/B
o
C
Blister packaging, rigid packaging, durable goods, thermoforming
3.2
0.900
Rigid packaging, durable goods, thermoforming
7
0.900
Rigid packaging, cosmetic packaging, excellent organoleptic properties
7.5
0.900
1300
Rigid packaging, consumer goods, automotive, general compounding
9.5
0.900
Film for food packaging, textile packaging, rigid packaging
9.5
0.9
Film for food packaging, textile packaging, rigid packaging
12
Textile applications - staple fibers
12
Rigid packaging, cosmetic packaging, excellent organoleptic properties
25
0.900
Textile applications - Non-wovens, fibers
25
0.900
Textile applications - Non-wovens, fibers
25
0.900
Textile applications - Non-wovens, fiber coating
25
0.900
Textile applications - Non-wovens, fiber coating
PP • Polypropylene
PP • Polypropylene
Heat Deflection
Temperature - under
load66 psi (0.45
MPa), Unannealed
Charpy Notched
Impact Strength
(23°C)
Tensile Strain (%)
Tensile Stress (MPa)
Flexural Modulus
(MPa)
Density
Typical Properties
Melt Flow Rate
Fibers Nonwoven
ISO Method
ISO 1133
ISO 1183
ISO 178
ISO 527-2
ISO 527-2
IISO 179-1/1eA
Units
g/10min
g/cm
3
MPa
MPa
%
kJ/m²
12
0.900
1500
36
9
4
83
0.900
1300
30
10
2
80
1300
30
10
2
80
1300
30
10
2
80
1300
30
10
2
80
DH542.01
HOMO
H502-25RG
DH502.00
H502-25RZ
DH502.01
ISO 75-2/B
o
C
Textile applications - staple fibers
25
Textile applications - Non-wovens, fibers
25
0.900
Textile applications - Non-wovens, fibers
25
0.900
Textile applications - Non-wovens, fiber coating
25
0.900
Textile applications - Non-wovens, fiber coating
www.braskem.com
[email protected]
Braskem Europe GmbH - European Headquarter
An der Welle 3, 60322 Frankfurt am Main, Germany
Phone: +49 69 427 299 200
Fax: +49 69 427 299 260