HP X120 SC GBIC Transceivers (SX and LX)
Transcrição
HP X120 SC GBIC Transceivers (SX and LX)
QuickSpecs HP X120 SC GBIC Transceivers (SX and LX) Overview Models HP X120 SC SX GBIC Transceiver HP X120 SC LX GBIC Transceiver JD485A JD486A Warranty and support 1-year warranty: with advance replacement and 30-calendar-day delivery (available in most countries) Electronic and telephone support: limited electronic and telephone support is available from HP; refer to www.hp.com/networking/warranty for details on the support provided and the period during which support is available Software releases: refer to www.hp.com/networking/warranty for details on the software releases provided and the period during which software releases are available for your product(s) DA - 14002 Worldwide — Version 1 — March 2, 2011 Page 1 QuickSpecs HP X120 SC GBIC Transceivers (SX and LX) Technical Specifications HP X120 SC SX GBIC Transceiver (JD485A) Physical characteristics Connectivity An SX Gigabit Interface Converter that provides a Electrical characteristics full-duplex Gigabit solution for up to 550m over multimode fiber. Cabling Cable length Up to 550m Fiber type Multi Mode Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. Services HP X120 SC LX GBIC Transceiver (JD486A) 1 SC 1000BASE-SX port SC Connector type 850 nm Wavelength 1.1 W Power consumption typical 1.6 W Power consumption maximum Maximum distance: • 160MHz*km OM1 = 220m • 200MHz*km OM2 = 275m • 500MHz*km OM3 = 550m Physical characteristics Connectivity An LX Gigabit Interface Converter that provides a Electrical characteristics full-duplex Gigabit solution for up to 550m over multimode fiber or up to 10km over single mode Cabling fiber. 1 SC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) SC Connector type 1300 nm Wavelength 1.1 W Power consumption typical 1.6 W Power consumption maximum Cable type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations); Maximum distance: • 500Mhz*km distance = 500m Cable length Up to 550m. A Mode Conditioning Patch Cable may be required in multimode applications Fiber type Both Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. Services DA - 14002 Worldwide — Version 1 — March 2, 2011 Page 2 QuickSpecs HP X120 SC GBIC Transceivers (SX and LX) Technical Specifications To learn more, visit www.hp.com/networking © Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA - 14002 Worldwide — Version 1 — March 2, 2011 Page 3
Documentos relacionados
manual tc 500.p65
Under the below mentioned terms and conditions INTELBRAS will cover the cost of replacement parts for one year as well as the labor required to install / service those parts. Simply bring your tele...
Leia maisPRO45 Specification Sheet - Audio
the distance to the closest performer. If additional mics are needed for wide sources, they should not be closer together laterally than three times the distance to the front source, to avoid phase...
Leia mais