Installation Instructions - OM
Transcrição
Installation Instructions - OM
Installation Instructions Rua Santa Bárbara 27/45 4400–289 Vila Nova de Gaia Portugal Rua Fábrica Material de Guerra 10 – Porta 2 1950–128 Lisboa Portugal t. +351 223 710 419 f. +351 223 702 044 t. +351 211 919 300 f. +351 223 702 044 Av. Dr. Cardoso de Melo 1470 Edificio Net Office Cj. 108 Vila Olímpia 04548–005 São Paulo Brasil t. +55 (11) 3045 3095 Linox IP 20 | 230V | 50/60Hz 12 Specifications • Diffuse light wall lamp. • Lampholder in brushed stainless steel. • Linestra fluorescent bulb or Linestra LED bulb. Standard accessories (versions 8W/13W/35W/60W) • 2 No. 6 plastic wall plugs • A2 stainless steel DIN 7505 B cylindrical head 4 mm (width) x 40 mm (length) screws (versions 20W/120W) • 4 No. 6 plastic wall plugs • 4 A2 stainless steel DIN 7505 B cylindrical head 4 mm (width) x 40 mm (length) screws Page 1/3 Available wattages 1 x 6W (Linestra LED) 1 x 8W (Linestra FL) 1 x 13W (Linestra FL) 1 x 20W (Linestra FL) [email protected] www.om-light.com Installation Instructions Rua Santa Bárbara 27/45 4400–289 Vila Nova de Gaia Portugal Rua Fábrica Material de Guerra 10 – Porta 2 1950–128 Lisboa Portugal t. +351 223 710 419 f. +351 223 702 044 t. +351 211 919 300 f. +351 223 702 044 Av. Dr. Cardoso de Melo 1470 Edificio Net Office Cj. 108 Vila Olímpia 04548–005 São Paulo Brasil [email protected] www.om-light.com t. +55 (11) 3045 3095 Linox 1st step Switch off power supply; 2nd step Marking the anchorage locations on the wall; Drill attachment holes; 3rd step (versions 8W/13W/35W/60W) Connect the power wires; Fix the support to the wall; 4th step(versions 8W/13W/35W/60W) Insert the light bulb; Luminaire installed. 3rd step (versions 20W/120W) Connect the power wires; Fix back plate to the wall; 4th step (versions 20W/120W) Insert the light bulb; Luminaire installed. F Esquema de ligação N Page 2/3 Installation Instructions Rua Santa Bárbara 27/45 4400–289 Vila Nova de Gaia Portugal Rua Fábrica Material de Guerra 10 – Porta 2 1950–128 Lisboa Portugal t. +351 223 710 419 f. +351 223 702 044 t. +351 211 919 300 f. +351 223 702 044 Av. Dr. Cardoso de Melo 1470 Edificio Net Office Cj. 108 Vila Olímpia 04548–005 São Paulo Brasil t. +55 (11) 3045 3095 General conditions Installation/Maintenance • The installation and maintenance of the different products must be performed by a qualified professional. The installation conditions described in the installation instructions and the operating conditions mentioned in the product datasheet must be duly guaranteed. Osvaldo Matos cannot be held liable for the incorrect assembly, installation, maintenance, repair or handling of its products. Osvaldo Matos cannot be held liable for unsuitable fittings. Osvaldo Matos cannot be held liable for product alteration or for instalation instructions not being duly followed. O/M products are prepared for installation in areas with ambient temperatures between 0ºC and 35ºC. Osvaldo Matos recommends that any false ceilings intended for the placement of recessed products should only be erected after the products to be mounted have been chosen. The same applies for the opening of slots to mount this type of product. Osvaldo Matos recommends reinforcing the ceiling close to the Mounting cutout according to the product characteristics. Page 3/3 Performance • The performance of the product will only be guaranteed if its handling, use, installation and maintenance are performed according to the supplied instructions. Power values in products with LED Light Source may have a 10% variation on the indicated value. Flux indicated for LED systems is a mean value, for Tj=25°C. Photometry results are obtained by testing a standard product of each range, in the laboratory under ideal conditions. Sales conditions • All electrical components included in the products are of high quality. Warranty • O/M products have a 3-year warranty from the delivery date for any proven construction or manufacturing defects, provided the transport conditions, installation conditions described in the installation instructions and the operating conditions mentioned in the product datasheet are duly guaranteed. Parts and components requiring replacement due to normal wear are excluded from this warranty. The products must be installed and maintained by qualified personnel in accordance with the accompanying instructions, and they cannot be altered or repaired without the prior written permission of Osvaldo Matos. Osvaldo Matos must be formally notified of any defect that is found and covered by the warranty. Osvaldo Matos decides whether to repair and/ or replace the product for the same or an equivalent product, subject to the changes arising from the technological evolution of the manufacturing process at that time, unless another solution is imposed by mandatory law. Returned products will only be accepted within 10 days of their delivery, and only for manufacturing defects that are confirmed by the factory, unless another conditions are stipulated by mandatory law. Hence, we recommend that products are checked on delivery. [email protected] www.om-light.com
Documentos relacionados
LS - Pendant - OM
• O/M products have a 3-year warranty from the delivery date for any proven construction or manufacturing defects, provided the transport conditions, installation conditions described in the instal...
Leia mais