Command Examples

AKPRFIDMI02-R2-13.56M (TICA)
Protocol Manual
Features:
1. Support ISO14443A S50/S70 1K/4K card.
2. Support RS232 interface.
3. Multiples read blocks by single command.
Functions:
1.
2.
3.
4.
5.
Antenna On/Off.
Get serial number of card.
Read data from card.
Write data to card.
Get firmware version.
Mi fare module flow chart
：
Command overview
：
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
Command Byte
Mifare Application oriented
Mifare Low level
protocol command
command
„s‟
Select
Get S/N
„l‟
Login [sector,Keytype,key]
Authenticate
„r‟
Read [block]
Read
„w‟
Write [block, data]
Write
„poff‟/‟pon‟
Turn the anten
na power on/off Reset TAGs
„v‟
Get Version
Reference
ProtocolInstruction:
STX
Station ID Length
1 byte 1 byte
1 byte
Command / Parameter
BBC
ETX
N byte
1 byte
1 byte
1. STX: Start byte (0x02)
2. Station ID: Unique ID of the station
ID 0: Reserved for theus
b master (Reader device)
ID 01: Reply only address 0x01, other address reserved (Get ID Instruction)
3. Length: Data Length Indicator
Denotes the length of the Command/
Parameter.
4. Command/Parameter: Instruction Block
The instruction block contains the command
and parameterinformation.The
command values are the same as protocol
overview. Parameter transmitted binary
of Hex. The length of the command block depends on the instructions.
5. BBC: Block Check Character
This byte is used to detect transmission errors.
It is calculated by XORing each
byte of the transmission frame excluding the STX/BCC and ETX character.
BBC = (Station ID)XOR (Length)XOR (Command/Parameter)
All Command Examples:
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
SelectCommand Example
：
Command
Example
„s‟
02 01 01 73 73 03
ISO 14443A SelectResponse Example
：
Answer
Explain
02 00 04 AA E3 47 73 79 03
SN: AA E3 47 73
02 00 01 4E 4F 03
No TAG: „N‟
ISO 14443ALogin Command Example
：
Command
Example
„l‟
02 01 09 6C 00AA FF FF FF FF FF FF CE 03
Sector (1byte)
00 ~ 0F (for S50)
or 00 ~ 3F(for S70)
Keytype (1byte)
AA/BB authenticate with keytype A/B
Key (6 byte)
keydata authentication is done.
ISO 14443ALogin Response Example
：
Answer
Explain
02 00 01 4C 4D 30
Login success:„l‟
02 00 01 4E 4F 03
No TAG: „N‟
02 00 01 46 47 03
Login Failure:„F‟
02 00 01 45 46 03
Invalid Key: „E‟
ISO 14443ARead Command Example
：
Command
Example
„r‟
02 01 02 72 00 71 03
Block (1byte)
00~03(for S50
/S70)
ISO 14443ARead Response Example
：
Answer
Explain
02 00 10 AA E3 47 73 7D 88 04 00 47 C1 2A D5 55 00 08
Read data: Block0 data
07 BF 03
02 00 01 4E 4F 03
No TAG: „N‟
02 00 01 46 47 03
ISO 14443AWrite Command Example
：
Read Failure:„F‟
Command
Example
„w‟
02 01 12 7701 00 11 22 33 44 55 66 77 88 99 AA BB CC DD
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
EE FF 65 03
Block (1byte)
Data (16byte)
00~03(for S50
/S70)
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx x(x: 00 ~ FF)
ISO 14443AWrite Response Example
：
Answer
Explain
02 00 00 11 22 33 44 55 66 88
77 99 AA BB CC DD
EE FF 10 03
Write data: Block1 data
02 00 01 4E 4F 03
No TAG: „N‟
02 00 01 46 47 03
Write Failure:„F‟
Turn on/off antenna Command Example
：
Command
Example
„poff‟
02 01 04 70 6F 66 66 1A 03
„pon‟
02 01 03 70 6F 6E 73 03
Turn on/off antennaResponse Example
：
Answer
Explain
02 0001 50 51 03 02 00 04 AA E3 47 73Turn on/off success
: „P‟
79 03
SN: AA E3 47 73(If there is TAG)
a
02 00 01 50 51 03
Turn on/off success:
„P‟
none (No TAG)
Get Version Command Example
：
Command
Example
„v‟
02 01 01 76 76 03
Get VersionResponse Example
：
Answer
Explain
02 00 04 56 32 2E 32 7C 03
FirmwareVersion:„V2.2‟
Appendixes
:
Mifare ISO14443A card of memory
organizationfor MF1 IC S50
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
Note:
The 4K Byte EEPROM memory organized
is
in 32 sectors with 4 blocks and in 8
sectors with 16 blocks. One block consists of 16 bytes.
Access Conditions
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
Note:
If key B may be read in the corresponding Sector Trailer it cannot serve for
authentication (all grey marked lines in previous table). Consequ
ences: If the RWD
tries to authenticate any block of a sector with key B using grey marked access
conditions, the card will refuse any subsequent memory access
authentication
after
.
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757
Mifare ISO14443A card of memory
organizationfor MF1 IC S70
Note:
The 4K Byte EEPROM memory organized
is
in 32 sectors with 4 blocks and in
8sectors with 16 blocks. One block consists of 16 bytes.
In the erased state the EEPROM cells are read as a logical
“ 0” , in the written state as a
logical “ 1” .
Access Conditions
For the first 32 sectors (first 2K Bytes of NV
-memory) the access conditions can be
set individually for a data area sized one block.
For the last 8 sectors (upper 2K Bytes of-memory)
NV
access conditions can be set
individually for a data area sized 5 block
s.
SEDE ADMINISTRATIVA
Rua Senador Petrônio Portela, 47 Galpão 5 – Zona Industrial Norte – Joinville/SC CEP: 89219-575
www.neoyama.com.br
Suporte Técnico (+55) 47 3028-6757