Dowloadable PDF version - IMEKO XIX World Congress, Lisbon

Transcrição

IMEKO XIX WORLD CONGRESS
September 6-11, 2009 • Lisbon, Portugal
Fundamental and Applied Metrology
SPONSORS
EXHIBITORS
TABLE OF CONTENTS
CHAIRMAN’S WELCOME MESSAGE ...................................................................................................................................................... 1
VICE-CHAIRMAN’S WELCOME MESSAGE .............................................................................................................................................. 2
IMEKO .......................................................................................................................................................................................... 3
Members ................................................................................................................................................................................... 3
Addresses .................................................................................................................................................................................. 3
IMEKO Officers .......................................................................................................................................................................... 4
Advisory Board .......................................................................................................................................................................... 4
Technical Board ......................................................................................................................................................................... 4
Drafting Committee ................................................................................................................................................................... 4
Credentials and Membership Committee .................................................................................................................................. 5
Technical Committees ............................................................................................................................................................... 5
ORGANIZING COMMITTEE.................................................................................................................................................................. 7
INTERNATIONAL PROGRAM COMMITTEE .............................................................................................................................................. 8
VENUE ........................................................................................................................................................................................... 9
LISBON......................................................................................................................................................................................... 10
Accessibility ............................................................................................................................................................................. 10
Check in/out Policy .................................................................................................................................................................. 10
Climate .................................................................................................................................................................................... 10
Average Temperature and Rainfall .......................................................................................................................................... 11
Currency .................................................................................................................................................................................. 11
Driving ..................................................................................................................................................................................... 11
Electric Current ....................................................................................................................................................................... 11
Entertainment ......................................................................................................................................................................... 11
Exchange ................................................................................................................................................................................. 12
Health Requirements............................................................................................................................................................... 12
Language ................................................................................................................................................................................. 12
Meals ...................................................................................................................................................................................... 12
Medical Care ........................................................................................................................................................................... 12
Museums ................................................................................................................................................................................ 12
Passport and Visas ................................................................................................................................................................... 13
Post and Telecommunications ................................................................................................................................................. 13
Public Transportation .............................................................................................................................................................. 13
Recreation ............................................................................................................................................................................... 13
Religious Services .................................................................................................................................................................... 13
Sales Tax.................................................................................................................................................................................. 13
Security ................................................................................................................................................................................... 14
Shops ...................................................................................................................................................................................... 14
Shopping Areas ....................................................................................................................................................................... 14
Smoking .................................................................................................................................................................................. 14
Tipping .................................................................................................................................................................................... 14
INVITED TALKS ............................................................................................................................................................................... 15
Terahertz Based Imaging for Inspection and Spectroscopic Analysis ........................................................................................ 15
World Metrology - The Next 10 Years ...................................................................................................................................... 16
Metrology Challenges for Biofuels ........................................................................................................................................... 17
Challenges in Medical Measurements ..................................................................................................................................... 18
Space Metrology – A Cosmic Vision ......................................................................................................................................... 19
FLOORPLANS ................................................................................................................................................................................. 21
OVERALL SCHEDULE........................................................................................................................................................................ 23
SPECIAL EVENTS SCHEDULE .............................................................................................................................................................. 24
WORKSHOPS ................................................................................................................................................................................. 25
Workshop on New Definition of the kilogram .......................................................................................................................... 25
Workshop on the VIM ............................................................................................................................................................. 25
Workshop on ADC Testing ....................................................................................................................................................... 25
Workshop on Measuring the Impossible: Measurement of Characteristics Related to Human Perception and Interpretation . 25
ROUND TABLES.............................................................................................................................................................................. 26
Round Table on the VIM .......................................................................................................................................................... 26
Round Table on Continuous and Dynamic Calibration in Force and Torque ............................................................................. 26
Round Table on Traceability in Chemistry, Health, Food and Nutrition .................................................................................... 26
Round Table on Higher Education in 21st Century .................................................................................................................... 26
DETAILED PROGRAM ...................................................................................................................................................................... 27
Workshop on New Definition of the kilogram .......................................................................................................................... 29
TC4 – Advanced Instrumentation ............................................................................................................................................ 30
TC4 – Software Measurements ............................................................................................................................................... 31
TC5 – Meeting ......................................................................................................................................................................... 32
TC10 – Technical Diganostics 1 ............................................................................................................................................... 33
TC17 – Measurement in Robotics ........................................................................................................................................... 34
TC21 – Dynamical Measurements ........................................................................................................................................... 35
TC3 – Mass I ........................................................................................................................................................................... 36
TC4 – Automated Test and Measurement Systems ................................................................................................................. 37
TC4 – Waveform Analysis and Measurement .......................................................................................................................... 38
TC10 – Meeting ....................................................................................................................................................................... 39
TC11 – Metrological Infrastructure ......................................................................................................................................... 40
TC17 – Meeting ....................................................................................................................................................................... 41
TC21 – Uncertainty and Inference .......................................................................................................................................... 42
TC2 – Meeting ......................................................................................................................................................................... 43
TC3 – Force Standard Machines - Improvements and Investigations....................................................................................... 44
TC4 – Workshop on ADC Testing - Session 1 ........................................................................................................................... 45
TC7 – Uncertainty ................................................................................................................................................................... 46
TC11 – Meeting ....................................................................................................................................................................... 47
TC15 – Experimental Mechanics ............................................................................................................................................. 48
TC20 – Measurement in Civil Engineering ............................................................................................................................... 49
TC7 – Workshop on the VIM ................................................................................................................................................... 50
TC3 – Dynamic Force Measurement ....................................................................................................................................... 51
TC5 – Characterization of Hardness Indenters ........................................................................................................................ 53
TC13 – Respiratory Measurements ......................................................................................................................................... 54
TC15 – Meeting ....................................................................................................................................................................... 55
TC20 – Meeting ....................................................................................................................................................................... 56
TC7 – Round Table on the VIM ............................................................................................................................................... 57
TC3 – Force Measurement Devices ......................................................................................................................................... 58
TC4 – Radio Frequency, Microwave and Milimiter Wave Measurements................................................................................ 59
TC4 – Calibration, Metrology and Standards ........................................................................................................................... 60
TC5 – Hardness Measurement, Standards and Application ..................................................................................................... 61
TC10 – Technical Diagnostics 2 ............................................................................................................................................... 62
TC19 – Meeting ....................................................................................................................................................................... 63
TC2 – Fiber Optics ................................................................................................................................................................... 64
TC4 – Measurement for System Identification and Control ..................................................................................................... 65
TC4 – Sensors and Transducers ............................................................................................................................................... 66
TC7 – Foundations .................................................................................................................................................................. 67
TC19 – Water / Electromagnetic ............................................................................................................................................. 68
TC16 – Meeting ....................................................................................................................................................................... 69
TC21 – Meeting ....................................................................................................................................................................... 70
TC2 – Spectroscopy ................................................................................................................................................................ 71
TC3 – Calibration and Comparison fo Force and Torque Machines ......................................................................................... 72
TC14 – Measurement of Form Deviation ................................................................................................................................ 74
TC18 – Meeting ....................................................................................................................................................................... 75
TC22 – Meeting ....................................................................................................................................................................... 76
TC1 – Organisational Aspects of Metrology Education ............................................................................................................ 77
Round Table on Continuous and Dynamic Calibration in Force and Torque ............................................................................. 78
TC7 – Applications .................................................................................................................................................................. 80
TC13 – Meeting ....................................................................................................................................................................... 81
TC18 – Quality Measurement and Evaluation ......................................................................................................................... 82
TC4 – Power and Energy Measurements................................................................................................................................. 83
TC7 – Methodology ................................................................................................................................................................ 84
TC12 – Meeting ....................................................................................................................................................................... 85
TC16 – Pressure Metrology ..................................................................................................................................................... 86
TC18 – Measurement and Modelling of Human Movements .................................................................................................. 87
TC22 – Technology and Uncertainty ....................................................................................................................................... 88
Poster Session 1 (TC1, TC2, TC3, TC19) .................................................................................................................................... 89
TC1 – Training Systems for Metrology Education .................................................................................................................... 94
TC2 – Light Sources and Detectors .......................................................................................................................................... 95
TC4 – Meeting ......................................................................................................................................................................... 96
TC12 – Pyrometry ................................................................................................................................................................... 97
TC21 – Metrology Data Analysis ............................................................................................................................................. 98
TC22 – New Systems and Methods ......................................................................................................................................... 99
Poster Session 2 (TC7, TC8, TC9, TC11, TC13, TC14) ............................................................................................................... 100
TC3 – Torque Standard Machines - New Ideas and Developments ........................................................................................ 105
TC4 – Power Quality Assessment .......................................................................................................................................... 106
TC9 – Meeting ....................................................................................................................................................................... 107
TC12 – Fixed Points............................................................................................................................................................... 108
TC14 – Optical Metrology in Manufacturing and Gear Measurements.................................................................................. 109
TC16 – Pressure Balances ..................................................................................................................................................... 110
TC19 – Air/Soil ...................................................................................................................................................................... 111
Round Table on Traceability in Chemistry, Health, Food and Nutrition .................................................................................. 112
TC3 – Torque and Multi-Component Measurements ............................................................................................................ 113
TC12 – Applications .............................................................................................................................................................. 114
TC13 – Radiation Measurements .......................................................................................................................................... 115
TC14 – Meeting ..................................................................................................................................................................... 116
TC16 – Vacuum and Low Pressure ........................................................................................................................................ 117
TC1 – Meeting ....................................................................................................................................................................... 118
TC3 – Mass II ........................................................................................................................................................................ 119
TC9 – Flow Measurement - Liquids etc. ................................................................................................................................ 120
TC13 – Biomedical Measurements ........................................................................................................................................ 121
TC14 – Calibration, Traceability and Measurements Uncertainty .......................................................................................... 122
TC24 – Traceable Chemical Measurements........................................................................................................................... 123
Poster Session 3 (TC4, TC12, TC15) ........................................................................................................................................ 124
TC4 – Power Quality Assessment .......................................................................................................................................... 128
TC7 – Meeting ....................................................................................................................................................................... 129
TC9 – Flow Measurement - Gases etc. .................................................................................................................................. 130
TC12 – Calibrations and Intercomparisons ............................................................................................................................ 131
TC13 – Biomeasurements ..................................................................................................................................................... 132
TC14 – Optical Metrology in High-Precision Measurements.................................................................................................. 133
Poster Session 4 (TC5, TC10, TC16, TC20, TC21, TC22, TC23, TC24) ........................................................................................ 134
TC3 – Force Measurement from Micro- to Pico-Newton ....................................................................................................... 139
TC4 – Digital and Mixed Signal Processing ............................................................................................................................ 140
TC8 – Meeting ....................................................................................................................................................................... 141
TC14 – Measurement of Surface Characteristics ................................................................................................................... 142
TC21 – Measurement Software, Validation ........................................................................................................................... 143
TC23 – Meeting ..................................................................................................................................................................... 144
Round Table on Higher Education in 21st Century .................................................................................................................. 145
TC4 – Direct Current and Low Frequency Measurements ..................................................................................................... 146
TC8 – Uncertainty and Statistical Analysis ............................................................................................................................. 147
TC21 – Measurement Applications ....................................................................................................................................... 148
TC23 – Food and Nutritional Metrology - 1 ........................................................................................................................... 149
TC24 – Meeting ..................................................................................................................................................................... 150
TC7 – Workshop on Measuring the Impossible: Measurement of Characteristics Related to Human Perception and
Interpretation ............................................................................................................................................................. 151
TC3 – Meeting ....................................................................................................................................................................... 152
TC8 – Calibration and Metrological Characterization ............................................................................................................ 153
TC13 – Biomedical Sensors ................................................................................................................................................... 154
TC14 – Tactile Coordinate Metrology.................................................................................................................................... 155
TC23 – Food and Nutritional Metrology - 2 ........................................................................................................................... 156
AUTHOR INDEX ............................................................................................................................................................................ 157
CHAIRMAN’S WELCOME MESSAGE
As General Chairman of the IMEKO XIX World Congress it
is an honour and a privilege to welcome you to Lisbon,
capital of Portugal, the western continental European
country that in, the 15th century, gave new worlds to the
World.
The theme chosen for the Congress is “Fundamental and
Applied Metrology”. By choosing this theme, the
organization wants to stress the importance of both
Fundamental Metrology, which encompasses the bases of Metrology, and all the Metrology
aspects more closely related to applications. More than ever, everyday life and trade rely and
depend on the development of state-of-the-art technological-based metrology. The theme is
clearly broad and opens the possibility of participating to all people working in Metrology
coming either from academia or industry, from scientists to engineers, from mathematicians to
chemists and physicists, from instrumentation designers to measuring techniques developers.
The emphasis on Fundamental and Applied Metrology is also present in the subjects of the five
invited talks that we hope will constitute hallmarks of the IMEKO XIX World Congress.
The Programme Committee and the Organizing Committee did their best to put-up a Congress
at least as successful as the previous ones, namely of the 2006 XVIII World Congress in Rio de
Janeiro, Brazil. Special attention was paid to the reviewing process in order to maintain and try
to increase the quality of the accepted papers and, thus, of the Congress. I do hope that such
goal was achieved and that we were able to further contribute to the continued effort of
reaching excellence in IMEKO events.
It is my special pleasure to host this IMEKO XIX World Congress for you. I hope that you find it
technically fulfilling and highly entertaining and that it will constitute an opportunity for useful
interaction and communications with colleagues.
Beyond the technical contents of the Congress, I do hope that you will have the opportunity to
enjoy Lisbon and its surroundings as well as the many cultural and recreational activities
available in Portugal.
Welcome to Portugal! Welcome to Lisbon! Welcome to the IMEKO XIX World Congress!
Pedro Silva Girão
Instituto Superior Técnico/Instituto de Telecomunicações - Portugal
1
VICE-CHAIRMAN’S WELCOME MESSAGE
On behalf of the Organizing Committee it is a privilege to
welcome you to Lisbon, site of the IMEKO XIX World
Congress. The Congress will take place in a modern
Congress Centre located in the riverbanks of the Tagus River
where the EXPO98 was organized.
As Vice-Chairman of the Congress I must thank all the
authors that submitted papers, the chairmen of the
Technical Committees of IMEKO and in particular the 198
reviewers who contributed with their valuable time and expertise.
Overall, 694 papers from 48 countries were originally submitted. Of these, 610 were accepted,
34 were rejected and 50 were conditionally accepted pending a second review of the final
paper. In the end, 551 accepted full papers were received for publication. The Congress
program is divided into oral and poster sessions with 389 papers to be presented in the oral
sessions and 162 in poster sessions. In addition to the regularly submitted papers, five invited
speakers were selected. Their presentations cover different topics in metrology,
instrumentation and measurement. Proposed by the TC chairmen, four workshops are included
in the program. The topics include the new definition of the kilogram, the VIM, analog-to-digital
converters and on measuring the impossible – measurement of characteristics related to
human perception and interpretation. Round tables on the VIM, on continuous and dynamic
calibration in force and torque, on traceability in chemistry, health, food and nutrition and on
higher education in the 21st century are also included in the Congress program. I hope you find
this final program, rich and diverse as is the tradition of IMEKO.
To complement the technical program and to underline the strong connection between IMEKO
and industries, an exhibition is also present in the halls of the congress centre. Although the
Organizing Committee hoped for a larger number of exhibitors, the worldwide economic
situation has forced many companies to reduce their budgets which has prevented their
participation in the Congress. Nevertheless, we must thank all the exhibitors who showed their
confidence in the organization and whose participation, we believe, will help make this
Congress a success.
Finally, I must thank the members of the Organizing Committee for their contribution in the
Congress Organization.
Pedro M. Ramos
Instituto Superior Técnico/Instituto de Telecomunicações - Portugal
2
IMEKO
IMEKO is a non-governmental federation of 39 Member Organizations individually concerned
with the advancement of measurement technology. Its fundamental objectives are the
promotion of international interchange of scientific and technical information in the field of
measurement and instrumentation and the enhancement of international co-operation among
scientists and engineers from research and industry. Founded in 1958, the Confederation has
consultative status with UNESCO and UNIDO and is one of the five Sister Federations within
FIACC (Five International Associations Co-ordinating Committee), further consisting of
• IFAC- International Federation of Automatic Control,
• IFIP - International Federation for Information Processing,
• IFORS - International Federation of Operational Research Societies and
• IMACS - International Association for Mathematics and Computers in Simulation.
MEMBERS
Albania
Australia
Austria
Belgium
Brazil
Bulgaria
Canada
China
Croatia
Czech Republic
Egypt
Finland
France
Germany
Greece
Hungary
Italy
Japan
Kazakhstan
Kenya
Korea
Mexico
The Netherlands
Nigeria
Poland
Portugal
Romania
Russia
Rwanda
Serbia
ADDRESSES
IMEKO Secretariat
Ms. Karolina Havrilla
P. O. Box 457
H-1371 Budapest
Hungary
Phone/Fax: +36 1 353 1562
Email: [email protected]
[email protected]
3
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
Thailand
Turkey
United Kingdom
IMEKO OFFICERS
President – Prof. António da Cruz Serra, Portugal
Vice President in charge of the XIX World Congress – Prof. Pedro Silva Girão, Portugal
Chairman of the Technical Board (President Elect) – Dr. Dae-Im Kang, Korea
Chairman of the Advisory Board (Immediate Past President) – Prof. Leo Van Biesen, Belgium
Vice President for External Relations – Dr. Hidetaka Imai, Japan
Secretary General – Prof. Mladen Boršić, Croatia
Information Officer – Dr. Dirk Röske, Germany
Treasurer – Prof. Peter Herbert Osanna, Austria
ADVISORY BOARD
Prof. L. Van Biesen, Belgium (Chairman)
Prof. F. Righini, Italy (Secretary)
Prof. O. Aumala, Finland, Honorary Member
Dr. K. Iizuka, Japan, Honorary Member
Prof. M. Peters, Germany, Honorary Member
Prof. Tamás Kemény, Hungary, Honorary Member
Prof. R. Z. Morawski, Poland
Prof. T. Ono, Japan
TECHNICAL BOARD
Dr. Dae-Im Kang, Korea (Chairman)
K. Havrilla, Hungary (Secretary)
Dr. A. Pusa, Finland
Dr. J. Volf, Czech Republic
All TC Chairmen ex officio
Dr. D. Röske, Germany (Information officer)
Editor-in-chief of Measurement ex officio
DRAFTING COMMITTEE
Prof. T. Pfeifer, Germany, (Chairman)
Prof. K. T. V. Grattan, United Kingdom
Prof. Ch. Eugene, Belgium
4
CREDENTIALS AND MEMBERSHIP COMMITTEE
Mr. J. D. Tallantire, United Kingdom (Chairman)
Mr. Z. Zelenka, Hungary
Prof. R. Collay, France
TECHNICAL COMMITTEES
TC1
TC2
TC3
TC4
TC5
TC6
TC7
TC8
TC9
TC10
TC11
TC12
TC13
TC14
TC15
TC16
TC17
TC18
TC19
TC20
TC21
TC22
TC23
TC24
Education and Training in Measurement and Inst. (P. P. L. Regtien, The Netherlands)
Photonics (T. Pfeifer, Germany)
Measurement of Force, Mass and Torque (R. Kumme, Germany)
Measurement of Electrical Quantities (P. Daponte, Italy)
Hardness Measurement (G. Bahng, Korea)
Vocabulary Committee
Measurement Science (L. Mari, Italy)
Traceability in Metrology (C. Ferrero, Italy)
Flow Measurement (M. J. Reader-Harris, United Kingdom)
Technical Diagnostics (L. Monostori, Hungary)
Metrological Infrastructures (M. Boršić, Croatia)
Temperature and Thermal Measurements (F. Righini, Italy)
Measurements in Biology and Medicine (P. Kneppo, Czech Republic)
Measurement of Geometrical Quantities (A. Weckenmann, Germany)
Experimental Mechanics (L. Borbás, Hungary)
Pressure and Vacuum Measurement (Jorge C. Torres-Guzmán, Mexico)
Measurement in Robotics (S. Tachi, Japan)
Measurement of Human Functions (K. Ito, Japan)
Environmental Measurements (P. Silva Girão, Portugal)
Measurement Techniques for the Construction Industry (K. Hariri, Germany)
Mathematical Tools for Measurements (F. Pavese, Italy)
Vibration Measurement (T. Bruns, Germany)
Metrology in Food and Nutrition (G. V. Iyengar, United States of America)
Chemical Measurements (P. Charlet, France)
5
6
ORGANIZING COMMITTEE
Pedro Silva Girão (Chairman)
Instituto Superior Técnico/lnstituto de Telecomunicações
Pedro Miguel Ramos (Vice-Chairman)
Instituto Superior Técnico/Instituto de Telecomunicações
Fernando Janeiro (Webserver co-Chair)
Universidade de Évora/Instituto de Telecomunicações
Raul Carneiro Martins (Webserver co-Chair)
Francisco Corrêa Alegria (Publications Chair)
Eduarda Filipe
Instituto Português da Qualidade
José Dias Pereira
Escola Superior de Tecnologia do Instituto Politécnico de Setúbal/Instituto de Telecomunicações
Octavian Postolache
Escola Superior de Tecnologia do Instituto Politécnico de Setúbal/Instituto de Telecomunicações
Helena Geirinhas Ramos
Artur Lopes Ribeiro
Manuel Fonseca da Silva
Instituto de Telecomunicações
7
INTERNATIONAL PROGRAM COMMITTEE
G. Bahng (Korea)
L. Van Biesen (Belgium)
P. de Bièvre (Belgium)
L. Borbás (Hungary)
M. Boršić (Croatia)
H. S. Brandi (Brazil)
T. Bruns (Germany)
A. Campilho (Portugal)
A. Carlosena (Spain)
P. Charlet (France)
R. Collay (France)
C. Couto (Portugal)
P. Daponte (Italy)
J. Delsing (Sweden)
S. Demidenko (New Zeland)
C. Eugene (Belgium)
C. Ferrero (Italy)
P. Silva Girão (Portugal)
V. Haasz (Czech Republic)
K. Hariri (Germany)
K. Herrmann (Germany)
K. Ito (Japan)
G. V. Iyengar (United States of America)
R. Kaarls (The Netherlands)
S. Kahn (United Kingdom)
Dae-Im Kang (Korea)
K. von Klitzing (Germany)
P. Kneppo (Czech Republic)
I. Kollar (Hungary)
R. Kumme (Germany)
T. Laopoulos (Greece)
A. M. Lazaro (Spain)
K. Lee (United States of America)
L. Mari (Italy)
L. Monostori (Hungary)
R. Z. Morawski (Poland)
H. P. Osanna (Austria)
R. Ottoboni (Italy)
F. Pavese (Italy)
M. Peters (Germany)
E. Petriu (Canada)
T. Pfeifer (Germany)
V. Piuri (Italy)
A. Pusa (Finland)
M. J. Reader-Harris (United Kingdom)
P. P. L. Regtien (The Netherlands)
P. Renaud (Switzerland)
F. Righini (Italy)
A. Sachenko (Ukraine)
D. M. Santos (Portugal)
M. Savino (Italy)
A. C. Serra (Portugal)
V. R. Singh (India)
D. M. Stefanescu (Romania)
S. Tachi (Japan)
J. C. Torres-Guzmán (Mexico)
A. J. Wallard (United Kingdom)
J. G. Webster (United States of America)
A. Weckenmann (Germany)
8
VENUE
The XIX IMEKO World Congress will take place on the river banks of the Tagus river on the site
of World Expo 98. The Venue is the FIL Meeting Centre.
"FIL Meeting Centre has a unique view near River Tagus and an architectonic beauty that lends
the Meeting Centre very particular and modern characteristics, unique in the city of Lisbon.
Only 7 minutes away from Lisbon International airport and 20 minutes from downtown, the FIL
Meeting Centre benefits with the Parque das Nações characteristics, providing its events with a
sign of quality and improvement." - From the FIL Meeting Centre Website
9
LISBON
Most likely founded by the Phoenicians, styled by the Moors and certainly enriched by the spice
trade in the golden age of its oversea empire, Lisboa is a historic capital, a potpourri of unusual
character and charm, an amalgam of 800 years of cultural influences mingle with modern
trends and life style creating intricate and spectacular contrasts.
Spread across seven hills always opening a window towards the majestic Tagus river, Lisboa
invites you.
ACCESSIBILITY
Lisboa International Airport located 6 km from the city centre, and about 20/30 minutes driving
from Estoril, is served by all major international airlines from all over the world.
CHECK IN/OUT POLICY
To guarantee occupancy of the hotel rooms before 13:00, they should be booked for the
previous night too. Check out time is 12:00.
CLIMATE
The climate, through its effect on vegetation, divides Portugal. Such as in Spain, three sets of
influences are involved: Atlantic, continental and Mediterranean. The former predominates
overall, putting most of the country into the humid zone of the Iberian Peninsula, but is
especially true in the Northwest, where it gives a mild, rainy climate.
The maritime winds certainly influence Portugal, especially through its long 700 km coastline.
As long as we move away from the coast, the humidity diminishes, the interior areas being
quite 'fair', with the exception of the Tagus North valley, where the climate is wet and soft.
The Northern region benefits from the Atlantic cyclones, while South and East are dominated
by the subtropical anticyclone, that allows temperatures to rise up to 40º C during the Summer.
The climate varies according to the altitude and the highest temperatures are more likely in the
lower regions of the South.
Lisboa has a warm climate, with sunny spring and summer days when temperatures frequently
reach 85ºF (30 ºC) or above. Winters are wet and windy, temperatures averaging around 50ºF
(10 ºC). In September the minimum average temperature is 17 ºC, the maximum average
temperature is 26 ºC and the rainfall is usually below 30 mm (1.2 inches).
10
AVERAGE TEMPERATURE AND RAINFALL
CURRENCY
As a member of the European Monetary System, since the 1st of January 2002, the local
currency Escudo was replaced by the "Euro".
DRIVING
Vehicles drive on the right side of the road. The use of safety belts is compulsory, and children
under 12 must ride in the back seats.
Portugal has a large freeway network crossing the whole country from the North to the South
in Algarve, and from the Ocean front to the border with Spain.
Valid driving licenses from EU countries, the USA, Canada and other major countries are
acceptable for use in Portugal up to 6 months stay.
ELECTRIC CURRENT
European type 2 pin sockets with 230 V AC at 50 Hz are used. The phase 380 V is normally
available in meeting and exhibition rooms.
ENTERTAINMENT
Lisboa has a variety of theatres and venues catering for most tastes. Opera, ballet, plays,
concerts, etc. take place on a regular basis all year round.
Portuguese Fado and Folklore shows are popular, and an international show at Casino Estoril
(the largest in Europe), with glittering cabaret complements the many discos and other night
spots (Bairro Alto, Av. 24 de Julho, Docas).
11
EXCHANGE
Major credit cards are accepted in most hotels, shops and restaurants. Travellers cheques and
currency can be changed at hotels or at a bank - these are open Monday to Friday from 08:30
to 15:00. Automatic changing and cash dispensing machines linked to international networks
are also widely available.
HEALTH REQUIREMENTS
With the exception of vaccination certificates for persons coming from areas where yellow
fever is endemic actually there are no special health requirements.
LANGUAGE
The official language is Portuguese. English and French are widely spoken.
MEALS
There are a wide variety of restaurants and cafés in Lisboa ranging from elegant and
sophisticated to casual and inexpensive. Take-away and fast food is also available from many
outlets.
Restaurants, bars, some with live music, and discos along the river Tagus, at Docas area,
Alcântara and at the Nations Park site, are very popular meeting spots especially at weekend
nights.
Breakfast is normally served between 7:30 and 10:00, lunch from 12:30 to 15:00, and dinner
from 19:30 to 22:00.
MEDICAL CARE
Clinics and hospitals provide round the clock emergency service. The national emergency phone
number is 112. For health related questions there is a hotline called “Saúde 24” with telephone
number 808 242 424.
Hotels have a doctor on call through the reception. Reciprocal E.C. cover is available at outpatient departments, otherwise private consultation fees are charged.
MUSEUMS
Most of the Museums are open Tuesdays to Sundays, from 10:00 to 17:00, closed on Mondays
and public holidays. Please check with the Secretariat of the Congress for further information.
12
PASSPORT AND VISAS
A valid passport (or identity card for European Community nationals) is required. Visas are not
necessary for citizens of EU countries, the U.S.A., Canada and the majority of countries.
Please contact your local Portuguese Embassy, Consulate or your Travel Agency for further
information.
POST AND TELECOMMUNICATIONS
Automatic direct dial telephone service is available to and from most countries in the world.
Public phones accept either a pre-paid card, or coins (see signs on the booth).
Credit systems such as AT&T are also available. Post offices are open Monday to Friday from
8:30 to 12:00 and 14:00 to 18:00.
PUBLIC TRANSPORTATION
There is a wide inexpensive network in all towns and cities. In Lisboa, city of the seven hills, you
can choose between bus, underground metro, elevators, electric trams or railway, within the
city or to the suburbs. Trains and express bus service also link the main towns of the country.
RECREATION
Excellent golf courses, tennis and squash courts, water sports and horse riding tempt the
energetic delegates. There are also many noteworthy museums and monuments, sunny
beaches to explore.
RELIGIOUS SERVICES
Portugal is predominantly Catholic, but a wide number of other religions (Protestant, Christian,
Moslem, Jewish, and Hindu, among others) are also represented. Please inquire at hotel
reception for times and places of services.
SALES TAX
Sales tax (VAT) is included in prices quoted. For non E.U. residents, tax free shopping schemes
are available in many shops, which gives substantial savings to visitors.
13
SECURITY
Crime rates in Portugal are among the lowest in the world. Hotels have their own security staff,
which is sufficient for most events. Specialist firms are also available if necessary, and the police
provide special protection for visiting dignitaries and high risk individuals.
SHOPS
Shops are open from 9:00 to 13:00 and 15:00 to 19:00 Monday to Friday, and 9:00 to 13:00 on
Saturdays. In major town centres and in many shopping malls, they stay open during lunch
hours, and close later at night, including weekends. Fine leather goods, lead crystal ware,
porcelain, vintage wines, golden and silver filigree, pottery and specialist textiles are considered
excellent buys in Portugal.
SHOPPING AREAS
The city centre, “a Baixa”, bordered by the magnificent Praça do Comércio (Black Horse Square)
facing the river Tejo, the Rua do Ouro, Rua Augusta and Rua da Prata finishing at Rossio Square,
Avenida da Liberdade, and the "Chiado" leading to Bairro Alto
Some of the main Shopping Centres are Colombo (one of the biggest in Europe), Amoreiras,
Vasco da Gama , Monumental and the Atrium Saldanha.
SMOKING
Smoking is forbidden by law in public transportation, and in closed public areas.
TIPPING
Tipping is optional, but normally 10% is customary in taxis, restaurants and bars.
14
INVITED TALKS
TERAHERTZ BASED IMAGING FOR INSPECTION AND SPECTROSCOPIC ANALYSIS
Tilo Pfeifer
Tilo Pfeifer, born 1939, received his Dipl.-Ing. degree in 1965
his Dr.-Ing. degree in 1968 and his postdoctoral lecture
qualification (Habilitation) in 1972 form the RWTH Aachen
University, Germany.
Between 1972 and 2004 he has been Professor and Director of
WZL department “Metrology and Quality Management”,
RWTH Aachen University and from 1980 - 2004 Director at the
Fraunhofer-Institute of Production Technology IPT, Aachen.
He is now Professor Emeritus at RWTH Aachen University. Still
he teaches graduate courses in “Metrology for Microsystems”
at several Universities (e.g. RWTH Aachen University; Tsinghua
University, Beijing; State University of Santa Catarina,
Florianopolis, Brazil). His research topics are Optical/Laser
Metrology and Quality Management.
Prof. Pfeifer received several awards e.g. Distinguished Service Award of IMEKO 1985, degree of
Honory Doctor form Universidade Federal Santa Catarina, Brazil, 1989 and from University of
Zaragoza, Spain 2003, Degree of Honory Professor from Tsinghua University, Beijing 1995 and
from Jilian University, Hangzhou, China 2006, Herward-Opitz Gold Medal of Honour from the
VDI association, Germany 2004.
Since 1973 Prof. Pfeifer is member of the General Council of IMEKO.
He is Academician of the International Academy of Quality (IAQ) and Academician of the
International Academy of Production Engeneering(CIRP), member of the executive board of
Federation for Quality (FQS), Germany and Chairman of the Scientific Council of the German
Association for Quality (DGQ).
Prof. Pfeifer has published some 500 scientific papers, generally on optical/ laser measurement,
coordinate measuring technology and quality management, numerous conference proceedings,
several books and patents.
15
INVITED TALKS
WORLD METROLOGY - THE NEXT 10 YEARS
Andrew Wallard
Andrew Wallard has been the Director of the
Bureau International des Poids et Mesures in
Sèvres, France since January 2004.
He was awarded a first class honours degree in
physics from St. Andrews University, Scotland
in 1968, and a Ph.D. in 1972. He then worked
as a laser physicist at the United Kingdom's
National Physical Laboratory (NPL) until 1978.
After that, he spent 12 years in various central
Government positions, including the Prime
Minister's Cabinet Office, and the Department
of Trade and Industry where he was a special advisor to various Ministers. He has broad
experience of science and technology policy and also managed several industrial programmes
of research support which were operated by the United Kingdom Government and the
European Community. He specialised in University/Industry collaboration.
He returned to the NPL in 1990 as Deputy Director and, subsequently, the NPL's Chief
Metrologist. From 2005, was a member of the International Committee for Weights and
Measures (CIPM).
Professor Wallard was subsequently elected as the Director of the International Bureau of
Weights and Measures (BIPM). The BIPM co-ordinates world metrology and is an InterGovernmental body under the Treaty of the Metre, supported by over 80 countries.
Andrew Wallard is a Professor at the University of Wales and has been awarded several
national and international honours for his contribution to measurement science and
technology.
He is a member of the Board of the National Conference of Standards Laboratories
International (NCSLI), the Scientific Academy of Turin, the Russian Academy of |Metrology, the
United Kingdom's Physical Society, and is a Fellow of the Institute of Physics, a Chartered
Physicist, a Chartered Engineer, a Chartered Scientist, and a life Fellow of the Royal Society of
Arts, Manufactures and Science.
He has published some forty refereed scientific papers, generally on laser physics and
metrology, numerous conference proceedings, and has contributed to various books on
metrology.
16
INVITED TALKS
METROLOGY CHALLENGES FOR BIOFUELS
João Jornada
João A. H. da Jornada has been the President of INMETRO (the
Brazilian National Metrology Institute), Rio de Janeiro, Brazil,
since December 2004, and Director for Scientific and Industrial
Metrology from 2000 to 2004.
He is Full Professor of Physics at Federal University of Rio
Grande do Sul, Brazil, where he received his Ph.D. in Physics in
1979, with honour degree. He has been an active researcher in
the fields of solid state physics, materials science, high-pressure
physics and superhard materials, and has published some 90
papers in indexed international journals. He is a member of the
Brazilian Academy of Sciences, and Fellow of the TWAS
(Academy of Sciences for the Developing World, Trieste, Italy).
He was awarded the Grand Cross of National Order of Scientific Merit, Brazil, the Aeronautic
Order of Merit, the Order of Rio Branco, and the Award for Outstanding Researcher in the field
of Physics and Astronomy, FAPERGS, 1998.
17
INVITED TALKS
CHALLENGES IN MEDICAL MEASUREMENTS
John Webster
John G. Webster received the B.E.E. degree from Cornell University,
Ithaca, NY, United States of America in 1953, and the M.S.E.E. and
Ph.D. degrees from the University of Rochester, Rochester, NY,
United States of America in 1965 and 1967, respectively.
He is Professor Emeritus of Biomedical Engineering at the
University of Wisconsin-Madison, United States of America. In the
field of medical instrumentation he teaches undergraduate and
graduate courses in bioinstrumentation and design. He does
research on improving electrodes for ablating liver to cure cancer,
on safety of electromuscular incapacitating devices and on a
miniature hot flash recorder.
He is the editor of the most-used text in biomedical engineering: Medical instrumentation:
Application and Design, Fourth Edition New York, John Wiley & Sons, 2009, and has developed
22 other books including the Encyclopedia of Medical Devices and Instrumentation, Second
Edition, New York, John Wiley & Sons, 2006 and 200 research papers.
Dr. Webster is a fellow of the Institute of Electrical and Electronics Engineers, Instrument
Society of America, American Institute of Medical and Biological Engineering, and Institute of
Physics. He has been a member of the IEEE-EMBS Administrative Committee and the NIH
Surgery and Bioengineering Study Section. He is the recipient of the 2001 IEEE-EMBS Career
Achievement Award.
18
INVITED TALKS
SPACE METROLOGY – A COSMIC VISION
André Tavares
André T. N. Tavares, born in 1979 in Portugal, graduated in 2002 in
Mechanical Engineering from Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia (UNL-FCT), Portugal. Since then
he has been working for the Testing Division of the European
Space Research and Technology Centre (ESTEC), of the European
Space Agency (ESA), in The Netherlands.
He began to perform mechanical design of Mechanical Ground
Support Equipment for Testing in the ESTEC’s Engineering Services
Section. He is now the technical responsible of the Metrology
Laboratory of the same section, providing support in measurement
applications, from concept to execution, to the ESTEC Test Centre
and labs and to ESA projects, such as Galileo, MetOp, Herschel-Planck, Automated Transfer
Vehicle, GOCE, Lisa-Pathfinder, AlphaBus, among others.
He received an ESA Award Prize in 2006 for the alignment of the COROT Baffle, a space
telescope successfully launched in end 2006.
19
20
FLOORPLANS
Ground Floor
n
tratio
Regis sk
De
Registr
ation
Desk
Main Entrance
Vasco da
Gama
Pedro Álvares
Cabral
Infante
D. Henrique
Luís Vaz
de Camões
River Side
21
FLOORPLANS
First Floor
Main Entrance Side
Bartolomeu
Dias
Fernão de
Magalhães
Internet
Access
Fernão
Mendes
Pinto
River Side
22
OVERALL SCHEDULE
Monday, Sept. 7th
8:30
Registration
9:00
Tuesday, Sept. 8th
TC2 - TC Meeting
TC3 - Oral Session 2
Opening
Ceremony
10:15
Wednesday, Sept. 9th Thursday, Sept. 10th
Friday, Sept. 11th
TC4 - WS ADC Ses. 1
TC9 - TC Meeting
TC8 - TC Meeting
TC4 - WS ADC Ses. 3
TC11 - TC Meeting
TC18 - TC Meeting
TC23 - TC Meeting
TC22 - TC Meeting
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Invited Talk
Andrew Wallard
Invited Talk
João Jornada
Invited Talk
John Webster
Invited Talk
André Tavares
WS VIM
RT Traceability in ...
RT Higher Education…
10:15
Coffee Break
11:00
11:00
Invited Talk
Tilo Pfeifer
12:00
12:00
RT Calibration Force...
TC4 - WS ADC Ses. 2
TC4 - WS ADC Ses. 4
TC13 - TC Meeting
TC14 - TC Meeting
TC15 - TC Meeting
TC20 - TC Meeting
Lunch
15:40
15:40
16:20
16:20
18:20
9:50
9:50
10:15
10:15
11:00
11:00
TC24 - TC Meeting
12:20
12:20
Lunch
Lunch
Lunch
Lunch
WS kilogram
RT on the VIM
TC1 - TC Meeting
WS Measuring the …
TC3 - TC Meeting
TC12 - TC Meeting
13:40
13:40
8:30
13:40
TC5 - TC Meeting
TC19 - TC Meeting
POSTER SESSION 1
POSTER SESSION 3
Coffee Break
Coffee Break
Coffee Break
Coffee Break
Coffee Break
TC7 - TC Meeting
TC4 - TC Meeting
TC10 - TC Meeting
TC17 - TC Meeting
TC16 - TC Meeting
TC21 - TC Meeting
POSTER SESSION 2
POSTER SESSION 4
Congress Banquet
23
13:40
15:40
15:40
16:20
16:20
Closing Ceremony and
Presentation of the
XX World Congress
17:00
SPECIAL EVENTS SCHEDULE
Monday, Sept. 7th
08:30
Tuesday, Sept. 8th
Wednesday, Sept. 9th
Thursday, Sept. 10th
Friday, Sept. 11th
08:30
Registration
09:00
Workshop on ADCs
TC4
Workshop on ADCs
TC4
Opening
Ceremony
09:50
09:50
Coffee Break
Coffee Break
Coffee Break
Coffee Break
10:15
10:15
10:15
10:15
Coffee Break
Invited Talk
Andrew Wallard
Invited Talk
João Jornada
Workshop on the VIM
TC1, TC7, TC21
Round Table on
Continuous and Dynamic
Calibration in
Force and Torque
TC3
11:00
11:00
Invited Talk
Tilo Pfeifer
12:00
12:00
Workshop on ADCs
TC4
Workshop on ADCs
TC4
Invited Talk
John Webster
Invited Talk
André Tavares
11:00
11:00
Round Table on
Traceability in Chemistry,
Health, Food
and Nutrition
TC8, TC23, TC24
Round Table on Higher
Education in the
21st Century
TC1, TC7
12:20
Lunch
12:20
Lunch
Lunch
Lunch
Lunch
13:40
13:40
13:40
13:40
Workshop on New
Definition of the
kilogram
TC3
Round Table on the VIM
TC1, TC7, TC21
Coffee Break
Coffee Break
Workshop on
Measuring the
Impossible:
Measurement of
Characteristics Related
to Human Perception
and Interpretation
TC7, TC18, TC21
15:40
15:40
15:40
15:40
Coffee Break
Coffee Break
Coffee Break
16:20
16:20
16:20
16:20
Closing Ceremony and
Presentation of the
XX World Congress
17:00
18:20
24
WORKSHOPS
WORKSHOP ON NEW DEFINITION OF THE KILOGRAM
Technical Committees: TC3
Monday, Sept. 7th, 13:40 - 15:40
WORKSHOP ON THE VIM
Technical Committees: TC1, TC7, TC21
Tuesday, Sept. 8th, 11:00 - 12:20
WORKSHOP ON ADC TESTING
Mornings of Tuesday (Sept. 8th) and Wednesday (Sept. 9th)
WORKSHOP ON MEASURING THE IMPOSSIBLE: MEASUREMENT OF CHARACTERISTICS RELATED TO
HUMAN PERCEPTION AND INTERPRETATION
Friday, Sept. 11th, 13:40 - 15:40
25
ROUND TABLES
ROUND TABLE ON THE VIM
Tuesday, Sept. 8th, 13:40 - 15:40
ROUND TABLE ON CONTINUOUS AND DYNAMIC CALIBRATION IN FORCE AND TORQUE
Wednesday, Sept. 9th, 11:00 - 12:20
ROUND TABLE ON TRACEABILITY IN CHEMISTRY, HEALTH, FOOD AND NUTRITION
Thursday, Sept. 10th, 11:00 - 12:20
ST
ROUND TABLE ON HIGHER EDUCATION IN 21 CENTURY
Friday, Sept. 11th, 11:00 - 12:20
26
DETAILED PROGRAM
27
28
Monday, 13:40 to 15:40 – Infante D. Henrique Room
WORKSHOP ON NEW DEFINITION OF THE KILOGRAM
Co-Chairs: Richard Davis, Head, Mass Section, Bureau International des Poids et Mesures, Sèvres, France
Rolf Kumme, Physikalisch-Technische Bundesanstalt (PTB), Germany
29
TC4 Oral Session 1
Monday, 13:40 to 15:40 – Pedro Álvares Cabral Room
TC4 – ADVANCED INSTRUMENTATION
Co-Chairs: Helena Ramos, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal
Christian Eugène, Universite Catholique de Louvain, Belgium
13:40
On the Use of Dielectric Spectroscopy for Quality Control of Vegetable Oils (363)
Andrea Cataldo, Department of Engineering for Innovation, University of Salento, Italy
Emanuele Piuzzi, Sapienza University of Rome, Italy
Giuseppe Cannazza, Dept. of Engineering for Innovation, University of Salento, Italy
Egidio De Benedetto, Dept. of Engineering for Innovation, University of Salento, Italy
Luciano Tarricone, Dept. of Engineering for Innovation, University of Salento, Italy
14:00
Weld Testing Using Eddy Current Probes and Image Processing (438)
Octavian Postolache, Instituto de Telecomunicações, Portugal
Artur Lopes Ribeiro, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
Helena Geirinhas Ramos, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
14:20
New Non-Destructive Test Technique on Metal Inspection (461)
Luís Rosado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal
Telmo Santos, IDMEC, DEM, IST, UTL, Portugal
Moisés Piedade, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal
Pedro M. Ramos, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
Pedro Vilaça, IDMEC, DEM, IST, UTL, Portugal
14:40
Requirements of a Mechanical Positioning System for Biological Imaging Using Magnetic Induction Tomography
(534)
Nuno B. Brás, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
P. A. F. Martins, IDMEC,IST, Portugal
Raul C. Martins, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
A. Cruz Serra, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
15:00
CAN Protocol: A Laboratory Prototype for Fieldbus Applications (535)
Mário Alves, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal, Portugal
J. M. Dias Pereira, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal/Instituto de Telecomunicações, Portugal
15:20
Large Number Library – The New LabVIEW Tool for Secure Measurement Systems (206)
Piotr Bobiński, Warsaw University of Technology, Poland
Wiesław Winiecki, Warsaw University of Technology, Poland
30
TC4 Oral Session 2
Monday, 13:40 to 15:40 – Vasco da Gama Room
TC4 – SOFTWARE MEASUREMENTS
Co-Chairs: Dusan Agrez, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Pasquale Arpaia, Dipartimento di Ingegneria - Università degli Studi del Sannio/ CERN European Organization for
Nuclear Research, Italy
13:40
Multicore Implementation of the AES Algorithm in the Measurement System (196)
Piotr Bilski, Warsaw University of Life Sciences, Poland
Wiesław Winiecki, Warsaw University of Technology, Institute of Radioelectronics, Poland
14:00
Software Quality Characterization of the Flexible Framework for Magnetic Measurements at CERN (469)
Pasquale Arpaia, Dipartimento di Ingegneria - Università degli Studi del Sannio/CERN, Italy
Vitaliano Inglese, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II/CERN, Switzerland
Giuseppe La Commara, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy
14:20
A Multi-Touch Collaborative Solution for Measurement Data Visualisation (524)
Septimiu Crisan, Dep. of Electrical Measurement, Fac. of Electrical Eng., Tech. Univ. of Cluj-Napoca, Romania
Valentin Dan Zaharia, Dep. of Electrical Measurement, Fac. of Electrical Eng., Tech. Univ. of Cluj-Napoca, Romania
Leonard Voicu Brender, Dep. of Electrical Measurement, Fac. of Electrical Eng., Tech. Univ. of Cluj-Napoca, Romania
Titus Eduard Crisan, Dep. of Electrical Measurement, Fac. of Electrical Eng., Tech. Univ. of Cluj-Napoca, Romania
14:40
Design of the Prototype of PLD Auto Test Platform (85)
Senzu Shen, Wuhan Digital Engineering Institute, China
Hua Li, Wuhan Digital Engineering Institute, China
Zhengle Shi, Wuhan Digital Engineering Institute, China
Minghu Zhang, Wuhan Digital Engineering Institute, China
Qian Liu, Wuhan Digital Engineering Institute, China
15:00
Automatically-Generated User Interfaces for Measurement Software Frameworks: A Case Study on Magnetic
Permability at CERN (611)
Marco Buzio, Dept. of Technology, Group of Magnets Superconductors Cryostats, CERN, Geneva, Italy
Lucio Fiscarelli, Dipartimento di Ingegneria - Università degli Studi del Sannio/CERN, Italy
Vitaliano Inglese, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II/CERN, Italy
Giuseppe La Commara, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy
31
TC5
Monday, 13:40 to 15:40 – Fernão Mendes Pinto Room
TC5 – MEETING
Meeting of the Technical Committee
on
Hardness Measurement
TC5
32
TC10 Oral Session 1
Monday, 13:40 to 15:40 – Bartolomeu Dias Room
TC10 – TECHNICAL DIGANOSTICS 1
Co-Chairs: Janusz Smulko, Gdańsk University of Technology, Poland
13:40
Integrated Management System for Testing, Monitoring and Diagnostic of Power Transformer Insulation (68)
Dragan Kovacevic, Electrical Engineering Institute "Nikola Tesla", Serbia
Jelena Lukic, Electrical Engineering Institute "Nikola Tesla", Serbia
Dragana Naumovic-Vukovic, Electrical Engineering Institute "Nikola Tesla", Serbia
Slobodan Skundric, Electrical Engineering Institute "Nikola Tesla", Serbia
14:00
Nondestructive Testing in Diagnostics of High-Voltage Varistors (353)
Lech Hasse, Gdańsk University of Technology, Poland
Janusz Smulko, Faculty of Electronics, Telecommunications and Informatics, Gdańsk Univ. of Technology, Poland
14:20
Automatic Diagnosis of Power Transformers Based on Dissolved Gas Analysis - First Level of Diagnosis using VAC and
VSC Inference Methods (357)
Mladen Banovic, Croatia
Josip Butorac, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
14:40
Automatization of Tampering Identification in Induction Electrical Power Meters (454)
Noara Foiatto, PPGEP/UFGRS and LABELO/PUCRS, Brazil
Christine Tessele Nodari, PPGEP/UFGRS, Brazil
João Miguel Lac Roehe, FENG/PUCRS, Brazil
Marcus Vinicius Viegas Pinto, LABELO/PUCRS, Brazil
15:00
Remote Monitoring of Incipient Faults Using GPRS in Power Transformers (655)
Marco A. M. Cavaco, Federal University of Santa Catarina, Brazil
Mauro Eduardo Benedet, Federal University of Santa Catarina, Brazil
César A. A. Nogueira, Federal University of Santa Catarina, Brazil
Régis H. Coelho, Centrais Elétricas de Santa Catarina, Brazil
33
TC17 Oral Session 1
Monday, 13:40 to 15:40 – Fernão de Magalhães Room
TC17 – MEASUREMENT IN ROBOTICS
Co-Chairs: Susumu Tachi, The University of Tokyo, Keio University, Japan
13:40
Positioning Accuracy of Non-Conventional Production Machines (485)
Ľudovít Kolláth, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia
Martin Halaj, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia
Eva Kureková, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia
14:00
SIFT-Based Measurements for Vehicle Model Recognition (9)
Apostolos Psyllos, Electrical and Computer Engineering School, National Technical University of Athens, Greece
Christos Anagnostopoulos, Cultural Technology & Communication Department, University of the Aegean, Greece
Eleftherios Kayafas, Electrical and Computer Engineering School, National Technical University of Athens, Greece
14:20
Mobile Robot Localization from Landmark Bearings (84)
Toshifumi Tsukiyama, Tokyo Denki University, Japan
34
TC21 Oral Session 1
Monday, 13:40 to 15:40 – Luís Vaz de Camões Room
TC21 – DYNAMICAL MEASUREMENTS
Co-Chairs: Clemens Elster, Physikalisch-Technische Bundesanstalt (PTB), Germany
Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden
13:40
Analysis of Dynamic Measurements: New Challenges Require New Solutions (211)
Trevor Esward, National Physical Laboratory, United Kingdom
Clemens Elster, Physikalisch-Technische Bundesanstalt (PTB), Germany
Jan Peter Hessling, SP Technical Research Institute of Sweden, Sweden
14:00
Uncertainty Evaluation of Dynamic Measurements in Line with the GUM (57)
Sascha Eichstädt, Physikalisch-Technische Bundesanstalt (PTB), Germany
Alfred Link, Physikalisch-Technische Bundesanstalt (PTB), Germany
14:20
Statistical Characterisation of Dynamic Propagation Environments for Mobile Wireless Communication Systems
(208)
Luk Arnaut, National Physical Laboratory, United Kingdom
14:40
Dynamic Measurement Uncertainty of HV Voltage Dividers (325)
Jan Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden
Anders Mannikoff, SP Technical Research Institute of Sweden, Measurement Technology, Sweden
15:00
Optimisation of Orthogonal Polynomial Signals for Direct Identification of Equivalent Circuit Parameters (258)
Marek Niedostatkiewicz, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
Romuald Zielonko, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
15:20
Enhancing the Interpretability of Terahertz Data Through Unsupervised Classification (637)
Henrike Stephani, Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany
Michael Herrmann, Fraunhofer Institute for Physical Measurement Techniques (IPM), Kaiserslautern, Germany
Karin Wiesauer, RECENDT GmbH, Linz, Austria
Stefan Katletz, RECENDT GmbH, Linz, Austria
Bettina Heise, Johannes Kepler Univ., Department of Knowledge-Based Mathematical Systems, Linz, Austria
35
TC3 Oral Session 1
Monday, 16:20 to 18:20 – Infante D. Henrique Room
TC3 – MASS I
Co-Chairs: Richard Davis, Head, Mass Section, Bureau International des Poids et Mesures, Sèvres, France
16:20
Determination of the Atomic Mass Constant by Ion Accumulation (49)
Christian Schlegel, Physikalisch-Technische Bundesanstalt (PTB), Germany
Michael Gläser, Physikalisch-Technische Bundesanstalt (PTB), Germany
Frank Schlolz, Physikalisch-Technische Bundesanstalt (PTB), Germany
Gabriela Bethke, Physikalisch-Technische Bundesanstalt (PTB), Germany
Michael Mecke, Physikalisch-Technische Bundesanstalt (PTB), Germany
16:40
Analysis on the Effects of Stiffness in Mass Measurement Using Relay Feedback of Displacement (77)
Takeshi Mizuno, Saitama University, Japan
Yuji Ishino, Saitama University, Japan
Masaya Takasaki, Saitama University, Japan
17:00
Density Measurement System of 50 kg Weights by Method A in OIML R111 (2004) at CMS (99)
Feng-Yu Yang, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Sheau-shi Pan, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
17:20
Cleaning of Silicon Density Standards (173)
Horst Bettin, Physikalisch-Technische Bundesanstalt (PTB), Germany
Detlef Schiel, Physikalisch-Technische Bundesanstalt (PTB), Germany
Martin Vogtmann, Physikalisch-Technische Bundesanstalt (PTB), Germany
Henning Niemann, Physikalisch-Technische Bundesanstalt (PTB), Germany
17:40
Development and Realisation of a Fully Automatic Testing Facility for Determining the Volume of E1 Weights Up to
50 kg Based on Hydrostatic Weighing (261)
Christian Buchner, BEV- Bundesamt für Eich- und Vermessungswesen, Austria
36
TC4 Oral Session 3
Monday, 16:20 to 18:20 – Pedro Álvares Cabral Room
TC4 – AUTOMATED TEST AND MEASUREMENT SYSTEMS
Co-Chairs: Grzegorz Lentka, Gdańsk University of Technology, Poland
Co-Chairs: Damir Ilić, Faculty of Electrical Engineering and Computing, University of Zagreb, Croatia
16:20
Portable Analyzer for Impedance Spectroscopy (61)
Jerzy Hoja, Gdańsk University of Technology, Poland
Grzegorz Lentka, Gdańsk University of Technology, Poland
16:40
An Application of TCRBF Neural Network in Multi-Node Fault Diagnosis Method (340)
Zbigniew Czaja, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
Michal Kowalewski, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
17:00
Power Quality Measurement Analysis of the Electrostatic Precipitator (434)
Aleksandar Nikolic, Electrical Engineering Institute "Nikola Tesla", Serbia
Ilija Stevanovic, Electrical Engineering Institute "Nikola Tesla", Serbia
17:20
Evaluation of IEEE1588 Applied to Synchronized Acquisition in Marine Sensor Networks (MSN) (462)
Joaquín del Río, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain
Daniel Toma, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain
Antoni Mànuel, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain
17:40
Using a Mouse Pointer as a Positioning Device in Eddy Current Testing (652)
Artur Lopes Ribeiro, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
F. Corrêa Alegria, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
M. Simões, Instituto Superior Técnico, Portugal
J. Pimentel, Instituto Superior Técnico, Portugal
P. Maurício, Instituto Superior Técnico, Portugal
J. Calvário, Instituto Superior Técnico, Portugal
A. Carvalho, Instituto Superior Técnico, Portugal
T. Rocha, Instituto Superior Técnico, Portugal
18:00
Testing the Stability of GPS Oscillators Within Serbian Permanent GPS Stations Network (428)
Vukan Ogrizovic, Belgrade University, Faculty of Civil Engineering, Serbia
Violeta Vasilic, Belgrade University, Faculty of Civil Engineering, Serbia
Sinisa Delcev, Belgrade University, Faculty of Civil Engineering, Serbia
Jelena Gucevic, Belgrade University, Faculty of Civil Engineering, Serbia
37
TC4 Oral Session 4
Monday, 16:20 to 18:20 – Vasco da Gama Room
TC4 – WAVEFORM ANALYSIS AND MEASUREMENT
Co-Chairs: Milos Sedlacek, Czech Technical University in Prague, Faculty of Electrical Engineering, Czech Republic
16:20
Design of DSP Windows Using Window Spectrum Zeros Placement (44)
Milos Sedlacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Zdenek Stoudek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
16:40
On-Line Estimation of Parameters of a Time Series (152)
Andrzej Dobrogowski, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland
Michal Kasznia, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland
17:00
Significance of Correlation in the Uncertainty Evaluation of Sampling Oscilloscope Measurements (203)
Meinhard Spitzer, Physikalisch-Technische Bundesanstalt (PTB), Germany
Mark Bieler, Physikalisch-Technische Bundesanstalt (PTB), Germany
17:20
Performance Comparison of Three Algorithms for Two-Channel Sinewave Parameter Estimation: Seven Parameter
Sine Fit, Ellipse Fit, Spectral Sinc Fit (266)
Fernando M. Janeiro, Instituto de Telecomunicações/Universidade de Évora, Portugal
Tomáš Radil, Instituto de Telecomunicações, Portugal
17:40
New Algorithms for the Optimal Selection of the Bandpass Sampling Rate in Measurement Instrumentation (571)
Giovanni Betta, DAEIMI - University of Cassino, Italy
Domenico Capriglione, DAEIMI - University of Cassino, Italy
Luigi Ferrigno, DAEIMI - University of Cassino, Italy
Gianfranco Miele, DAEIMI - University of Cassino, Italy
18:00
Digital Notch Filters Implementation with Fixed-Point Arithmetic (504)
Eduardo Pinheiro, Instituto de Telecomunicações, Portugal
Pedro Silva Girão, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
38
TC10
Monday, 16:20 to 18:20 – Fernão Mendes Pinto Room
TC10 – MEETING
on
Technical Diagnostics
TC10
39
TC11 Oral Session 1
Monday, 16:20 to 18:20 – Bartolomeu Dias Room
TC11 – METROLOGICAL INFRASTRUCTURE
Co-Chairs: Mladen Boršić, Faculty of Electrical Engineering and Computing, Croatia
Janko Drnovsek, University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
16:20
Uncertainty of Road Traffic Safety Measurements (3)
Edi Kulderknup, Estonian Accreditation Centre, Estonia
Jürgen Riim, Estonian Accreditation Centre, Estonia
Tuuli Levandi, Faculty of Science, Tallinn University of Technology, Estonia
16:40
The Role of Metrology Communities Under the WTO System: Measurement Science and Conformity Assessment
Procedures (239)
Jookeun Park, KRISS, Korea
Gun Woong Bahng, NCSRD, KRISS, Korea
17:00
Implementation of a Measurement Uncertainty Guideline for ISO/IEC 17025 Laboratory Assessors (510)
Daniel Homrich da Jornada, Certificar / Rede Metrológica, RS, Porto Alegre, Brazil
Carla Schwengber ten Caten, PPGEP/UFRGS, Brazil
17:20
Smart Transducer Block Enables Plug & Play Transducers (511)
Vítor Viegas, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal, Portugal
17:40
Basic Characteristics of ZigBee and Simpliciti Modules to use in Measurement Systems (520)
L. Skrzypczak, Department of Electronics, Computer and System Sciences University of Calabria, Italy
Domenico Grimaldi, Department of Electronics, Computer and System Sciences University of Calabria, Italy
R. Rak, Inst. of the Theory of Elec. Eng., Inf. and Meas. Systems, Warsaw Univ. of Technology, Poland
18:00
Speed Measurement Uncertainty in Metrological Verifications at IPQ (640)
Olivier Pellegrino, Instituto Português da Qualidade, Portugal
Carlos Pires, Instituto Português da Qualidade, Portugal
António Cruz, Instituto Português da Qualidade, Portugal
40
TC17
Monday, 16:20 to 18:20 – Fernão de Magalhães Room
TC17 – MEETING
on
Measurement in Robotics
TC17
41
TC21 Oral Session 2
Monday, 16:20 to 18:20 – Luís Vaz de Camões Room
TC21 – UNCERTAINTY AND INFERENCE
Co-Chairs: Alistair Forbes, National Physical Laboratory, United Kingdom
Eduarda Filipe, Instituto Português da Qualidade, Portugal
16:20
Bayesian Analysis of a Calibration Model (53)
Ignacio Lira, Pontificia Universidad Católica de Chile, Chile
Dieter Grientschnig, Boehler Edelstahl, Austria
16:40
Determining the 95% Confidence Interval of Arbitrary Non-Gaussian Probability Distributions (81)
France Pavlovcic, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Janez Nastran, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
David Nedeljkovic, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
17:00
Comparison of Two Diferent Approaches in the Uncertainty Calculation of Gravimetric Volume Calibration (160)
Elsa Batista, Instituto Português da Qualidade, Portugal
Nelson Almeida, Instituto Português da Qualidade, Portugal
João Alves e Sousa, Laboratório Regional de Engenharia Civil, Portugal
17:20
Measurement Uncertainty Evaluation Associated with Calibration Functions (467)
M. G. Cox, National Physical Laboratory, United Kingdom
Alistair B. Forbes, National Physical Laboratory, United Kingdom
P. M. Harris, National Physical Laboratory, United Kingdom
I. M. Smith, National Physical Laboratory, United Kingdom
17:40
Correlation in Uncertainty of Measurement - A Discussion of State of the Art Techniques (479)
Rüdiger Kessel, National Institute of Standards and Technology (NIST), United States of America
Raghu N. Kacker, National Institute of Standards and Technology (NIST), United States of America
18:00
Novel and Established Concepts for Considering Correlation in Uncertainty Evaluation (528)
Klaus-Dieter Sommer, Physikalisch-Technische Bundesanstalt (PTB), Germany
Bernd Siebert, Physikalisch-Technische Bundesanstalt (PTB), Germany
Anna-Lisa Hauswaldt, Physikalisch-Technische Bundesanstalt (PTB), Germany
42
TC2
Tuesday, 08:30 to 09:50 – Fernão de Magalhães Room
TC2 – MEETING
on
Photonics
TC2
43
TC3 Oral Session 2
Tuesday, 08:30 to 09:50 – Pedro Álvares Cabral Room
TC3 – FORCE STANDARD MACHINES - IMPROVEMENTS AND INVESTIGATIONS
Co-Chairs: José Ángel Robles, Director de la División Científica y de RRII, Director of Scientific and IIRR Division, Centro Español de
Metrología (CEM), Spain
Zhimin Zhang, National Institute of Metrology, P. R. China
08:30
Improvement of the Realization of Forces Between 2 MN and 5 MN at PTB - The New 5 MN Force Standard Machine
(172)
Falk Tegtmeier, Physikalisch-Technische Bundesanstalt (PTB), Germany
Mark Seidel, Physikalisch-Technische Bundesanstalt (PTB), Germany
08:50
Improvement of Metrological Characteristics of INTI's 110 kN Force Standard Machine by Using the CENAM’s
Six-Component Dynamometer for Static and Dynamic Evaluation (205)
Alejandro Savarin, Instituto Nacional de Tecnología Industrial (INTI), Argentina
Carlo Marinari, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Jorge C. Torres-Guzmán, CENAM, Queretaro, Mexico
09:10
Influence of the Mutual Gravitational Attraction in a Set of Masses of Deadweight Machines (215)
Giancarlo D'Agostino, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Alessandro Germak, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Fabrizio Mazzoleni, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Danilo Quagliotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Giulio Barbato, DISPEA, Politecnico di Torino, Italy
09:30
Investigation of the Influence of Carrier Frequency or Direct Current Voltage in Force Calibrations (388)
Daniel Schwind, Gassmann Testing and Metrology, Germany
Torsten Hahn, GTM Gassmann Testing and Metrology GmbH, Germany
44
TC4 WS ADC Session 1
Tuesday, 08:30 to 09:50 – Vasco da Gama Room
TC4 – WORKSHOP ON ADC TESTING - SESSION 1
Co-Chairs: Vladimir Haasz, Deputy Head of Dept. of Measurement, Czech Technical University in Prague, Faculty of Electrical
Engineering, Czech Republic
Luca De Vito, Department of Engineering, University of Sannio, Italy
08:30
Error in the IEEE 1057 Standard Random Noise Test of ADCs (474)
08:50
Implementation of High Resolution DAC Test Station: A Contribution to Draft Standard IEEE P1658 (643)
Aldo Baccigalupi, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy
Mauro D'Arco, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy
Annalisa Liccardo, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy
Michele Vadursi, Università degli Studi di Napoli "Parthenope", Italy
09:10
A New Approach to the Design of Post-DAC Filters (372)
Jacek Piskorowski, West Pomeranian University of Technology, Szczecin, Poland
Roman Kaszynski, West Pomeranian University of Technology, Szczecin, Poland
Miguel Angel Gutierrez de Anda, Instituto Nacional de Astrofísica, Optica y Electronica, Mexico
Arturo Sarmiento-Reyes, Instituto Nacional de Astrofísica, Optica y Electronica, Mexico
09:30
Comparative Analysis of Different Acquisition Techniques Applied to Static and Dynamic Characterization of High
Resolution DAC (599)
Domenico Luca Carnì, University of Calabria, Italy
45
TC7 Oral Session 1
Tuesday, 08:30 to 09:50 – Infante D. Henrique Room
TC7 – UNCERTAINTY
Co-Chairs: Roman. Z. Morawski, Warsaw University of Technology, Faculty of Electronics and Information Technology, Institute of
Radioelectronics, Poland
Ivan Frollo, Institute of Measurement Science, Slovak Academy of Sciences, Slovakia
08:30
Modelling of Dynamic Measurements for Uncertainty Analysis by Means of Discretised State-Space Forms (580)
Uwe Hanebeck, Universität Karlsruhe, Germany
Michael Krystek, Physikalisch-Technische Bundesanstalt (PTB), Germany
Anna-Lisa Hauswaldt, Physikalisch-Technische Bundesanstalt (PTB), Germany
Albert Weckenmann, Friedrich-Alexander-University Erlangen-Nuremberg, Germany
08:50
Elements of Statistical Decision Making (321)
Kimmo Konkarikoski, Tampere University of Technology / ASE, Finland
Risto Ritala, Tampere University of Technology, Finland
09:10
On-Line Determination of the Measurement Uncertainty of the Stochastic Measurement Method (278)
Ivan Župunski, Faculty of Technical Sciences, Novi Sad, Serbia
Vladimir Vujicic, Faculty of Technical Sciences, Novi Sad, Serbia
Zoran Mitrovic, Faculty of Technical Sciences, Novi Sad, Serbia
Slobodan Milovancev, Faculty of Technical Sciences, Novi Sad, Serbia
Mile Pesaljevic, Faculty of Organizational Sciences, Belgrade, Serbia
09:30
Improvement of Uncertainty by MCMC for Blood Chemical Analysis (41)
Yasuo Iwaki, Chaos Applied Research Office, Japan
Tadao Inmuta, Chaos Applied Research Office, Japan
46
TC11
Tuesday, 08:30 to 09:50 – Fernão Mendes Pinto Room
TC11 – MEETING
on
Metrological Infrastructures
TC11
47
TC15 Oral Session 1
Tuesday, 08:30 to 09:50 – Luís Vaz de Camões Room
TC15 – EXPERIMENTAL MECHANICS
Co-Chairs: Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden
08:30
Experimental Residual Stress Analysis of Welded Ball Valve (11)
Pavel Macura, VŠB-TU Ostrava, Faculty of Mechanical Engineering, Czech Republic
František Fojtík, VŠB-TU Ostrava, Faculty of Mechanical Engineering, Czech Republic
Radomír Hrnčář, Faculty of Mechanical Engineering, VŠB – TU Ostrava, Czech Republic
08:50
State-of-the-Art and New Developments of Multi-Degree-of-Freedom Piezoelectric Motors for Experimental
Mechanics and Measuring Devices (143)
Ramutis Bansevicius, Kaunas University of Technology, Lithuania
09:10
Dynamic Calibration of a Bus (328)
Pingyu Zhu, Hunan University of Science and Technology, China
Jan Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden
Rongrong Wan, Hunan University of Science and Technology, China
09:30
Sea Seismometer Coupling on the Sediment (447)
Xavier Roset, Polytechnic University of Catalonia, SARTI, Spain
Montserrat Carbonell, Polytechnic University of Catalonia, Department of Fluids Mechanics, Spain
Spartacus Gomáriz, Polytechnic University of Catalonia, SARTI, Spain
48
TC20 Oral Session 1
Tuesday, 08:30 to 09:50 – Bartolomeu Dias Room
TC20 – MEASUREMENT IN CIVIL ENGINEERING
Co-Chairs: Karim Hariri, TU Braunschweig, Germany
08:30
Multi-Axes Force Transducer Using the System for Acting Pressure Image Visualisation (477)
J. Volf, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
P. Novak, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
K. Vitek, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
M. Novak, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
J. Vlcek, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
J. Stastny, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
R. Neděla, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
08:50
Surveillance of Steel Fibre Reinforced Concrete Slabs Measured with an Open-Ended Coaxial Probe (633)
Josep M. Torrents, Department of Electronic Engineering (Technical University of Catalonia), Spain
Pablo Juan-García, Department of Electronic Engineering (Technical University of Catalonia), Spain
Oriol Patau, Dept. of Electronic Engineering (Technical University of Catalonia), Spain
Antonio Aguado, Dept. of Construction Engineering (Technical University of Catalonia), Spain
09:10
Measurement of Moisture in Mortar Using a Coplanar Waveguide (525)
Pablo Juan-García, Department of Electronic Engineering (Technical University of Catalonia), Spain
Josep M. Torrents, Department of Electronic Engineering (Technical University of Catalonia), Spain
49
WORKSHOP ON THE VIM
Co-Chairs: Luca Mari, Università Cattaneo - LIUC, Italy
Paul Regtien, University of Twente, Fac. Electrical Engineering, Mathematics and Computer Science, The Netherlands
Franco Pavese, INRIM, Italy
11:00
Standing on the Shoulders of VIM (207)
Ludwik Finkelstein, Meaurement and Instrumentation Centre, City University London, United Kingdom
50
TC3 Oral Session 3
TC3 – DYNAMIC FORCE MEASUREMENT
Co-Chairs: Rolf Kumme, Physikalisch-Technische Bundesanstalt (PTB), Germany
Philippe Averlant, LNE - Laboratoire National de Métrologie et d'Essais, France
11:00
System Identification of Force Transducers for Dynamic Measurements (39)
Bernd Glöckner, Physikalisch-Technische Bundesanstalt (PTB), Germany
Christian Schlegel, Physikalisch-Technische Bundesanstalt (PTB), Germany
11:20
Dynamic Behaviors of Checkweigher with Electromagnetic Force Compensation (184)
Yuji Yamakawa, Univ. of Tokyo, Japan
Takanori Yamazaki, Oyama National College of Technology, Japan
Junichi Tamura, Anritsu Industrial Solutions Co., Ltd., Japan
Osamu Tanaka, Anritsu Industrial Solutions Co., Ltd., Japan
11:40
Static and Dynamic Measurement of Force Transducer's Deformation Under Load (317)
Andre Buß, Physikalisch-Technische Bundesanstalt (PTB), Germany
12:00
Development of Accurate Weighing System Used Under the Vibration-Like Moving Conditions, Verification of
Weghing System with 3 Accelerometers (544)
Yoshihiro Fujioka, Matsue College of Technology, Japan
Kouta Miyake, Matsue College of Technology, Japan
Jianxin Sun, National Institute of Advanced Industrial Science and Technology (AIST), Japan
Toshiro Ono, professor emeritus at Osaka Prefecture University, Japan
51
Co-Chairs: Francisco Alegria, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal
Dominique Dallet, University of Bordeaux - ENSEIRB, IMS Laboratory, France
11:00
Using Sinusoidal Instead of Triangular Stimulus Signals in the IEEE1057 Standard Random Noise Test of ADCs (475)
11:20
Sine Wave Signal Sources for Testing High-Speed High-Resolution A/D Converters (484)
Vaclav Papez, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Jaroslav Roztocil, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Stanislav Dado, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
11:40
A 3 Bits Discrete Pure Linear Analog Preprocessing Folding ADC Architecture Based on Cascade Controlled Channels
(32)
Fabio Leccese, "Roma Tre" University, Italy
Michael Magnone, "Roma Tre" University, Italy
12:00
High-Quality Low-Cost Low-Frequency Filter for ADC Testing (139)
Vladimir Haasz, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
David Slepicka, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
52
TC5 Oral Session 1
TC5 – CHARACTERIZATION OF HARDNESS INDENTERS
Co-Chairs: Edward Aslayan, Head of the Science Research Department Metrology in Mechanics, Thermodynamics and
Construction, "VNIIFTRI", Russia
Renato Machado, INMETRO/DIMCI/DIMEC, Chefe do Laboratório de Força - LAFOR, Brazil
11:00
Geometric Measurement Comparisons for Rockwell Diamond Indenters (29)
John Song, National Institute of Standards and Technology (NIST), United States of America
Samuel Low, National Institute of Standards and Technology (NIST), United States of America
Alan Zheng, National Institute of Standards and Technology (NIST), United States of America
11:20
Estimation of Uncertainty in Rockwell Hardness Diamond Cone Indenters (551)
Jorge Trota Filho, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Renato Reis Machado, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Sérgio Pinheiro de Oliveira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Cláudio Afonso Koch, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Islei Domingues da Silva, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
11:40
New Possibilities in the Geometrical Calibration of Diamond Indenters (625)
Alessandro Germak, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Claudio Origlia, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
12:00
Progress in the Characterization of the Geometry of Rockwell Diamond Indenters (155)
Gaoliang Dai, Physikalisch-Technische Bundesanstalt (PTB), Germany
Herrmann Konrad, Physikalisch-Technische Bundesanstalt (PTB), Germany
Febo Menelao, Physikalisch-Technische Bundesanstalt (PTB), Germany
53
TC13 Oral Session 1
TC13 – RESPIRATORY MEASUREMENTS
Co-Chairs: Ireneusz Jablonski, Wroclaw University of Technology, Poland
11:00
A Complex Mathematical Model of the Respiratory System as a Tool for the Metrological Analysis of the Interrupter
Technique (501)
Ireneusz Jabłoński, Wrocław University of Technology, Poland
Adam G. Polak, Wrocław University of Technology, Poland
Janusz Mroczka, Wrocław University of Technology, Poland
11:20
Estimation Method for Consumption Energy for Humans in Daily Cycle (344)
Takao Sugimoto, College of Science and Technolog, NIhon University, Japan
Yohsuke Yoshida, Student of graduate school, Science and Technology, Nihon University, Japan
I. Yoshida, Student of graduate school, Science and Technology, Nihon University, Japan
11:40
Quantification of the Respiratory Time-Series Regularity and Complexity Using Approximate Entropy and Sample
Entropy (506)
Ireneusz Jabłoński, Electronic and Photonic Metrology, Dep. of Electronics, Wroclaw Univ. of Technology, Poland
Andrzej Czajka, Electronic and Photonic Metrology, Dep. of Electronics, Wroclaw Univ. of Technology, Poland
Janusz Mroczka, Electronic and Photonic Metrology, Dep. of Electronics, Wroclaw Univ. of Technology, Poland
54
TC15
TC15 – MEETING
on
Experimental Mechanics
TC15
55
TC20
TC20 – MEETING
on
Measurement Techniques for the Construction Industry
TC20
56
ROUND TABLE ON THE VIM
Co-Chairs: Paul Regtien, University of Twente, Fac. Electrical Engineering, Mathematics and Computer Science, The Netherlands
Luca Mari, Università Cattaneo - LIUC, Italy
13:40
Measurement and Calibration: Considerations Based on the International Vocabulary of Metrology (VIM, 3rd Ed.)
and Related Standards (385)
Roberto Buccianti, CEI – Comitato Elettrotecnico Italiano, Italy
Marco Cibien, UNI – Italian Organization for Standardization, Italy
Bruno Rebaglia, ITIA - CNR, Italy
14:00
Accuracy, Trueness, and Precision: Considerations Based on the International Vocabulary of Metrology (VIM, 3rd Ed.)
and Related Standards (417)
Roberto Buccianti, CEI – Comitato Elettrotecnico Italiano, Italy
Marco Cibien, UNI – Italian Organization for Standardization, Italy
Bruno Rebaglia, ITIA - CNR, Italy
57
TC3 Oral Session 4
TC3 – FORCE MEASUREMENT DEVICES
Co-Chairs: Philippe Averlant, LNE - Laboratoire National de Métrologie et d'Essais, France
Amritlal Sawla, Physikalisch-Technische Bundesanstalt (PTB), Germany
13:40
Evaluation of Cutting Device with Stroke Enlargemnet Mechanism (108)
Yoshitaka Morimoto, Kanazawa Institute of Technology, Japan
14:00
Fibre Bragg Sensors Compared with Electrical Strain Gauges for Use in Force Measurement - Prospects and
Potentials (144)
Thomas Kleckers, Hottinger Baldwin Messtechnik GmbH, Darmstadt, Germany
14:20
Novel High-Resolution Interferometric Materials Testing Device for the Determination of the Viscoelastic Behaviour
of High-Tech Plastics (212)
Michael Kühnel, Ilmenau University of Technology, Germany
Falko Hilbrunner, Ilmenau University of Technology, Germany
Gerd Jäger, Technical University Ilmenau, Germany
14:40
The Influence of the Force Feed-in System on High-Accuracy Low Force Measurement (331)
Roland Füßl, Technical University Ilmenau, Germany
15:00
Material Charactarization for a Terneol-D Based Force Sensor (404)
Klaus Oppermann, Johannes Kepler University, Institute for Measurement Technology, Austria
Bernhard Zagar, Johannes Kepler University, Institute for Measurement Technology, Austria
58
TC4 Oral Session 5
TC4 – RADIO FREQUENCY, MICROWAVE AND MILIMITER WAVE MEASUREMENTS
Co-Chairs: Leo Van Biesen, Vrije Universiteit Brussel, Department ELEC, Belgium
Fernando Janeiro, Instituto de Telecomunicações, Universidade de Évora, Portugal
13:40
Interference Sensitivity of an Automatic Modulation Classifier (691)
Daniele Domenico Napolitano, TLC Testing Sannio Lab, Italy
Sergio Rapuano, Department of Engineering, University of Sannio, Italy
Maurizio Villanacci, Department of Engineering, University of Sannio, Italy
14:00
Automatic Signal Recognition for a Flexible Spectrum Management (690)
Niclas Björsell, ITB/Electronics, University of Gävle, Sweden
Pasquale Daponte, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy
Luca De Vito, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy
Sergio Rapuano, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy
14:20
Indoor Positioning by Ultra Wide Band Radio Aided Inertial Navigation (164)
Alessio De Angelis, DIEI, University of Perugia, Italy
John-Olof Nilsson, Signal Processing Lab, Royal Institute of Technology (KTH), Stockholm, Sweden
Isaac Skog, Signal Processing Lab, Royal Institute of Technology (KTH), Stockholm, Sweden
Peter Händel, Signal Processing Lab, ACCESS Linnaeus Center, Royal Institute of Technology, Sweden
Paolo Carbone, DIEI, University of Perugia, Italy
14:40
Available Measurements in Current WiMAX Networks and Positioning Opportunities (6)
Mussa Bshara, Vrije Universiteit Brussel, Belgium
Leo Van Biesen, Vrije Universiteit Brussel, Belgium
15:00
Measuring Demodulator Imbalance in Radio Frequency Receivers by Tone Test (14)
Peter Händel, Signal Processing Lab, ACCESS Linnaeus Center, Royal Institute of Technology, Sweden
Per Zetterberg, Signal Processing Lab, ACCESS Linnaeus Center, Royal Institute of Technology, Sweden
15:20
Period Estimation of the Modulated Signal (289)
Dusan Agrez, Faculty of Electrical Engineering, University of Ljubljana, Slovenia
59
TC4 Oral Session 6
TC4 – CALIBRATION, METROLOGY AND STANDARDS
Co-Chairs: Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica - INRIM, Italy
Gelson Rocha, INMETRO, Brazil
13:40
Multi-Range Transformer Bridge for Calibration of Inductance Standards (683)
Andrzej Met, Silesian University of Technology, Poland
Krzysztof Musiol, Silesian University of Technology, Poland
Tadeusz Skubis, Silesian University of Technology, Poland
14:00
Prediction of the Output Voltage of DC Voltage Standards (670)
Damir Ilić, Faculty of Electrical Engineering and Computing (FER), Croatia
Alan Šala, Faculty of Electrical Engineering and Computing (FER), Croatia
Ivan Leniček, Faculty of Electrical Engineering and Computing (FER), Croatia
14:20
Calibration of Capacitance Standards with a Quadrature Bridge (424)
Luca Callegaro, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Vincenzo D'Elia, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Bruno Trinchera, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
14:40
Alternative Power Standard Realization at Radio Frequency (250)
Luciano Brunetti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Luca Oberto, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Marco Sellone, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
15:00
Traceability Chain of the Capacitance Unit to Quantum Hall Effect at INMETRO - Four-Terminal Coaxial Bridge (97)
Renata Barros e Vasconcellos, Capacitance and Inductance Laboratory - INMETRO, Brazil
Luiz Macoto Ogino, Capacitance and Inductance Laboratory - INMETRO, Brazil
15:20
Calibration of High Accuracy Class Standard Current Transformers (318)
Dragana Naumovic-Vukovic, Electrical Engineering Institute "Nikola Tesla", Serbia
Slobodan Skundric, Electrical Engineering Institute "Nikola Tesla", Serbia
Dragan Kovacevic, Electrical Engineering Institute "Nikola Tesla", Serbia
Srdjan Milosavljevic, Electrical Engineering Institute "Nikola Tesla", Serbia
60
TC5 Oral Session 2
TC5 – HARDNESS MEASUREMENT, STANDARDS AND APPLICATION
Co-Chairs: Gunwoong Bahng, Director of the National Center for Standard Reference Data, KRISS, Korea
Febo Menelao, Physikalisch-Technische Bundesanstalt (PTB), Germany
13:40
Study of the Best Measurement Capability in Rockwell Scale at the Brazilian NMI INMETRO's Primary Hardness
Standard Machine (548)
Jorge Trota Filho, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Sérgio Pinheiro de Oliveira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Islei Domingues da Silva, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
14:00
Establishment of Brinell and Vickers Hardness Scales at UME (607)
Cihan Kuzu, TUBITAK UME (National Metrology Institute), Turkey
14:20
Accuracy of Standard Blocks for Hardness and Uncertainty of Hardness (50)
Takashi Yamamoto, Yamamoto Scientific Tool Laboratory, Japan
Masayuki Yamamoto, Yamamoto Scientific Tool Laboratory, Japan
Kensuke Miyahara, National Research Institute for Metals, Japan
14:40
Vibration Effect on Rockwell Scale C Hardness Measurement (5)
Tassanai Sanponpute, National Institute of Metrology, Thailand
Apichaya Meesaplak, National Institute of Metrology, Thailand
15:00
A Contact Point Detection for Indentation Test of Low-k Film (420)
Koichiro Hattori, National Metrology Institute of Japan, AIST, Japan
Yutaka Seino, National Metrology Institute of Japan, AIST, Japan
Takashi Usuda, AIST/NMIJ, Japan
15:20
Influencing Parameters of Equivalent Indentation Test (51)
Takashi Yamamoto, Yamamoto Scientific Tool Laboratory, Japan
Masayuki Yamamoto, Yamamoto Scientific Tool Laboratory, Japan
Kensuke Miyahara, National Research Institute for Metals, Japan
Tatsuya Ishibashi, Niigata University, Japan
61
TC10 Oral Session 2
TC10 – TECHNICAL DIAGNOSTICS 2
Co-Chairs: Marcantonio Catelani, University of Florence, Italy
13:40
Measurements of Acoustic Emission Induced by Partial Discharges in Foil-Based Capacitors for Their Quality
Assessment (166)
Kazimierz Józwiak, ZPR Miflex S.A., Poland
Marek Olesz, Faculty of Electrical and Control Engineering, Gdańsk University of Technology, Poland
14:00
Single Event Upset (SEU): Diagnostic and Error Correction System for Avioncs Device (442)
Lorenzo Ciani, University of Florence, Department of Electronics and Telecommunications, Italy
Marcantonio Catelani, University of Florence, Department of Electronics and Telecommunications, Italy
Lorenzo Veltroni, Sirio Panel S.p.A, Italy
14:20
Comparison Between Thermal Performance of Silver Conductive Adhesive and Sn-Ag-Cu Solder Joints in a Medical
Ultrasound Array Transducer (445)
Valeria L Scarano, University of Florence, Italy
Francesco Bertocci, University of Florence, Italy
Roberto Singuaroli, University of Florence, Italy
14:40
Primary Calibration of Acoustic Emission Sensors (512)
Jiri Keprt, Brno University of Technology, Czech Republic
Petr Beneš, Brno University of Technology, Czech Republic
15:00
Identification of Liquid Boiling by Acoustic Emission (536)
Petr Beneš, Brno University of Technology, Czech Republic
Miroslav Uher, Brno University of Technology, Czech Republic
62
TC19
TC19 – MEETING
on
Environmental Measurements
TC19
63
TC2 Oral Session 1
TC2 – FIBER OPTICS
Co-Chairs: Tilo Pfeifer, RWTH Aachen University, Germany
Yasuhiro Takaya, Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Japan
16:20
Novel Fiber Optic Sensor Based on in-Line Core-Cladding Intermodal Interferometer and Photonic Crystal Fiber (453)
Wojtek Bock, University of Quebec en Outaouais, Canada
Tinko Eftimov, Plovdiv University “P. Hilendarski”, Bulgaria
Predrag Mikulic, University of Quebec en Outaouais, Canada
Jiahua Chen, University of Quebec en Outaouais, Canada
16:40
Measurement of Roundness and Run-Out with Distributed Fiber-Optics Sensors (515)
Robert Schmitt, Fraunhofer Institute for Production Technology IPT, Germany
Niels König, Fraunhofer Institute for Production Technology IPT, Germany
Guilherme Francisco Mallmann, Fraunhofer Institute for Production Technology IPT, Germany
Frank Depiereux, fionec GmbH, Germany
17:00
Measurement of Radiation Effects on Active and Passive Optical Fiber Components (46)
Dan Sporea, National Institute for Laser, Plasma and Radiation Physics, Romania
Adelina Sporea, National Institute for Laser, Plasma and Radiation Physics, Romania
Constantin Oproiu, National Institute for Laser, Plasma and Radiation Physics, Romania
Rodica Georgescu, National Institute for Physics and Nuclear Engineering "Horia Hulubei", Romania
Ion Vata, National Institute for Physics and Nuclear Engineering "Horia Hulubei", Romania
17:20
Study of Time Fluctuation of Polarization of Polarization Preserving Fibers (70)
Filip Dvorak, Faculty of Military Technologies, University of Defence Brno, Czech Republic
Jan Maschke, Faculty of Military Technologies, University of Defence Brno, Czech Republic
Cestmir Vlcek, Faculty of Military Technologies, University of Defence Brno, Czech Republic
17:40
Dynamically Tunable Birefringence in Photonic Liquid Crystal Fibers (695)
Tomasz R. Woliński, Faculty of Physics, Warsaw University of Technology, Poland
Sławomir Ertman, Faculty of Physics, Warsaw University of Technology, Poland
Marzena Tefelska, Faculty of Physics, Warsaw University of Technology, Poland
Piotr Lesiak, Faculty of Physics, Warsaw University of Technology, Poland
Andrzej W. Domański, Faculty of Physics, Warsaw University of Technology, Poland
Roman Dąbrowski, Military University of Technology, Poland
Edward Nowinowski-Kruszelnicki, Military University of Technology, Poland
18:00
Optimization of the Fiber-Opitc Fabry-Perot Interferometer Construction (364)
M. Jedrzejewska-Szczerska, Dep. of Optoelectronics and Electronics Systems, Gdańsk Univ. of Technology, Poland
Ryszard Hypszer, Dep. of Optoelectronics and Electronics Systems, Gdańsk Univ. of Technology, Poland
Bogdan B. Kosmowski, Dep. of Optoelectronics and Electronics Systems, Gdańsk Univ. of Technology, Poland
64
TC4 Oral Session 7
TC4 – MEASUREMENT FOR SYSTEM IDENTIFICATION AND CONTROL
Co-Chairs: Pedro M. Ramos, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal
16:20
Hybrid Neural Network System for Electric Load Forecasting of Telecomunication Station (56)
Maurizio Caciotta, Roma Tre University, Italy
Sabino Giarnetti, Roma Tre University, Italy
Fabio Leccese, Roma Tre University, Italy
16:40
Electrical Impedance Measurement Using Voltage/Current Pulse Excitation (277)
Abraham Mejía-Aguilar, Universitat Politècnica de Catalunya (UPC), Spain
Ramon Pallàs-Areny, Universitat Politècnica de Catalunya (UPC), Spain
17:00
High-Accuracy Electrical Measurements Using Fractional Delay and PCA (133)
Renata Barros e Vasconcellos, Capacitance and Inductance Laboratory - INMETRO, Brazil
Marcello Luiz Rodrigues de Campos, UFRJ, Brazil
17:20
Permittivity Measurement and Anisotropy Evaluation of Dielectric Materials at Millimeter-Waves (153)
Carlos A. Fernandes, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
Jorge R. Costa, Instituto de Telecomunicações, ISCTE, Portugal
17:40
The New Configuration of Measure PCB Electric Permittivity Using the Ring Resonator (497)
Victor F. M. B. Melo, Federal University of Campina Grande, CEEI/LEMA, Brazil
Adaildo G D'Assunção Jr, Federal University of Campina Grande, CEEI/LEMA, Brazil
Alfredo Gomes Neto, CEFET-PB/GTMA, Brazil
Raimundo C. S. Freire, Universidade Federal de Campina Grande, Brazil
Glauco Fontgalland, Federal University of Campina Grande, CEEI/LEMA, Brazil
18:00
Characterizing Magnetic Materials Using Virtual Instrumentation (253)
Gopal Mahesh, SAMEER- Centre for Electromagnetics, India
Boby George, Graz University of Technology, Austria
V. Jayashankar, Dept. of Electrical Engineering, Indian Institute of Technology Madras, India
V. Jagadeesh Kumar, Dept. of Electrical Engineering, Indian Institute of Technology Madras, India
65
TC4 Oral Session 8
TC4 – SENSORS AND TRANSDUCERS
Co-Chairs: Sergey Yurish, Universitat Oberta de Catalunya (UOC), Internet Interdisciplinary Institute (IN3), Spain
Bernardo Tellini, University of Pisa, Department of Electrical Systems and Automation, Italy
16:20
Algorithms and Circuits for Low Power Secured Sensor Networks with Asymetric Computational Resources (665)
Tomasz Adamskl, Warsaw University of Technology, Institute of Electronic Systems, Poland
Wiesław Winiecki, Warsaw University of Technology, Institute of Radioelectronics, Poland
Jakub Olszyna, Warsaw University of Technology, Institute of Radioelectronics, Poland
16:40
Temperature and Frequency Dependence of Precision Current Transformer Based on Rogowski Coils (658)
Luka Ferković, Faculty of Electrical Engineering and Computing, University of Zagreb, Croatia
Damir Ilić, Faculty of Electrical Engineering and Computing, University of Zagreb, Croatia
Kristina Ferković, Faculty of Electrical Engineering and Computing, University of Zagreb, Croatia
17:00
Electromagnetic Gauge of Tube Inner Radius Compensated for Material Properties and Coil Radial Offset (464)
Darko Vasić, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
Silvano Perković, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
Vedran Bilas, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
17:20
Non-Contact, Short Distance Measuring System for Wide Applications (90)
17:40
Virtual Capacitance Meter Based on Impedance Modulus Measurement (686)
Sergey Yurish, Technical University of Catalonia (UPC Barcelona), Spain
Artur Skórkowski, Silesian Univ. of Technology, Institute of Measurement Science, Electronics and Control, Poland
Adam W. Cichy, Silesian Univ. of Technology, Institute of Measurement Science, Electronics and Control, Poland
18:00
Measurement of Eddy Current Transients in Fast-Cycled Linac Quadrupole Magnets at CERN (384)
Giancarlo Golluccio, CERN European Organization for Nuclear Research, Geneva, Switzerland
Marco Buzio, Dept. of Technology, Group of Magnets Superconductors Cryostats, CERN, Geneva, Switzerland
66
TC7 Oral Session 2
TC7 – FOUNDATIONS
Co-Chairs: Eric Benoit, LISTIC - Universite de Savoie, France
Giovanni Rossi, Università degli Studi di Genova - DIMEC, Italy
16:20
Measurement Science - An Examination of Its Current State and Lines of Advance (26)
16:40
Software as a Service in Measurement Science and Education (526)
Ludwik Finkelstein, Meaurement and Instrumentation Centre, City University London, United Kingdom
Dietrich Hofmann, Steinbeis Transferzentrum Qualitaetssicherung und Qualitaetsmesstechnik, Germany
Gerhard Linß, Ilmenau University of Technology, Germany
Olaf Kuehn, Landesamt fuer Mess- und Eichwesen Thueringen, Germany
17:00
Problems of Terminology Improvement in Metrology (514)
Roald Taymanov, D. I. Mendeleyev Institute for Metrology, Russia
Ksenia Sapozhnikova, D. I. Mendeleyev Institute for Metrology, Russia
17:20
Measurement as Information Channel with an Application to Printability (180)
Marja Mettänen, Tampere University of Technology, Finland
17:40
The Portuguese marco of 1499 - the First Travelling Standard Around the World (610)
António Cruz, Instituto Português da Qualidade, Portugal
18:00
Joint Scopes Activity the IMEKO and International Organizations of Standardization Technical Committees in Field of
Metrology (21)
Tetyana Gordiyenko, State Enterprise “UkrSREC”, Ukraine
Oleh Velychko, Ukrmetrteststandard, Ukraine
67
TC19 Oral Session 1
TC19 – WATER / ELECTROMAGNETIC
Co-Chairs: Roland Collay, Club Mesure Rhone-Alpes, France
Aimé Lay-Ekuakille, University of Salento, Italy
16:20
STFT - Based Spectral Analysis of Urban Waterworks Leakage Detection (147)
Aimé Lay-Ekuakille, University of Salento, Italy
Giuseppe Vendramin, University of Salento, Italy
Amerigo Trotta, University of Salento, Italy
Philippe Vanderbemden, University of Liege, Belgium
16:40
An IEEE1451.X and RFID Compatibility Unit for Water Quality Monitoring (616)
17:00
Radiometric Measurement of Corn Canopy Water Content with a 916 MHz Wireless Sensor Network (646)
João Carlos Giacomin, Federal University of Lavras, Brazil
Flávio Henrique Vasconcelos, Federal University of Minas Gerais, Brazil
Elson José da Silva, Federal University of Minas Gerais, Brazil
17:20
Acquisition Signals from Electromagnetic Field-Meters Using Digital Multimeters with Event Logging Mode (370)
Daniel Belega, Faculty of Electronics and Telecommunications, Politehnica University of Timisoara, Romania
Ciprian Dughir, Faculty of Electronics and Telecommunications, Politehnica University of Timisoara, Romania
17:40
Analysis of Time-Varying Low-Frequency Magnetic-Field Emitted from the Ship’s Inverter-Fed Induction Motor (529)
Beata Pałczyńska, Department of Marine Telecommunications, Gdynia Maritime University, Poland
Jacek Wyszkowski, Gdynia Maritime University, Poland
68
TC16
TC16 – MEETING
on
Pressure and Vacuum Measurement
TC16
69
TC21
TC21 – MEETING
on
Mathematical Tools for Measurements
TC21
70
TC2 Oral Session 2
Wednesday, 08:30 to 09:50 – Luís Vaz de Camões Room
TC2 – SPECTROSCOPY
Iakyra B. Couceiro, National Institute of Metrology, Standardization and Industrial Quality (INMETRO), Brazil
08:30
Proposal of Imaging-Type 2-Dimensinal Fourier Spectroscopy (64)
Ichirou Ishimaru, Kagawa University, Japan
Takashi Takuma, Kagawa University, Japan
Shinji Yabushita, Kagawa University, Japan
Takeshi Kawajiri, Kagawa University, Japan
Kana Yanogawa, Kagawa University, Japan
Takaki Harada, Kagawa University, Japan
Kazuya Yamamoto, Kagawa University, Japan
08:50
Raman Sensors: Interest and Applications (259)
Marc Fontana, LMOPS, UMR CNRS 7132, University of Metz and Supelec, France
Patrice Bourson, LMOPS, UMR CNRS 7132, University of Metz and Supelec, France
Ivana Durickovic, LMOPS, UMR CNRS 7132, University of Metz and Supelec, France
Julien Martin, LMOPS, UMR CNRS 7132, University of Metz and Supelec, France
Jean-Marie Chassot, LMOPS, UMR CNRS 7132, University of Metz and Supelec, France
Mario Marcherri, Laboratoire Régional des Ponts et Chaussées, France
Rémy Claverie, Laboratoire Régional des Ponts et Chaussées, France
09:10
Precise Measurement of Thickness Distribution of Non-Uniform Thin Films by Imaging Spectroscopic Reflectometry
(378)
Miloslav Ohlidal, Institute of Physical Engineering, Brno University of Technology, Czech Republic
Ivan Ohlidal, Masaryk University Brno, Czech Republic
Petr Klapetek, Czech Metrology Institute, Czech Republic
D. Nečas, Department of Physical Electronics, Faculty of Science, Masaryk University, Czech Republic
09:30
Fundamental Verification for 2-Dimensional Super-Resolution Optical Inspection for Semiconductor Defects by Using
Standing Wave Illumination Shift (354)
Ryota Kudo, The University of Tokyo, Japan
Shin Usuki, Shizuoka University, Japan
Satoru Takahashi, The University of Tokyo, Japan
Kiyoshi Takamasu, The University of Tokyo, Japan
71
TC3 Oral Session 5
Wednesday, 08:30 to 09:50 – Pedro Álvares Cabral Room
TC3 – CALIBRATION AND COMPARISON FO FORCE AND TORQUE MACHINES
Co-Chairs: Amritlal Sawla, Physikalisch-Technische Bundesanstalt (PTB), Germany
Andy Knott, National Physical Laboratory, United Kingdom
08:30
Calibration of Hydraulic Force Machines – Requirements, Concepts, Problems, Solutions (24)
Boris Katz, P. K. Calibration & Consulting Labs, Israel
Peter Kornhauser, P. K. Calibration & Consulting Labs, Israel
Shlomi Bitas, Beton Daruch, Israel
08:50
Application of a Loading Frame Structure to a Force Comparator Referring to the Tuning Fork Type Force Transducer
(240)
Toshiyuki Hayashi, National Metrology Institute of Japan, AIST, Japan
Yoshihisa Katase, National Metrology Institute of Japan, AIST, Japan
Kazunaga Ueda, National Metrology Institute of Japan, AIST, Japan
Naoya Shinozaki, Shinko Denshi Co., Ltd., Japan
Hiroshi Suzawa, Shinko Denshi Co., Ltd., Japan
09:10
A Comparative Verification of Force Calibration Machines Used by an Accredited Laboratory (255)
Carlo Ferrero, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Adelina Leka, Servizio Italiano di Taratura, Italy
09:30
UK Torque Intercomparison - 2007 (52)
Andy Robinson, National Physical Laboratory, United Kingdom
72
Wednesday, 08:30 to 09:50 – Vasco da Gama Room
Co-Chairs: Pasquale Daponte, Department of Engineering, University of Sannio, Italy
Jan Saliga, Technical University of Kosice, Slovak Republic
08:30
Static Characterizations of Analog to Digital Converter (138)
Patrick Espel, LNE Laboratoire National de Métrologie et d'Essais, France
Andre Poletaeff, LNE Laboratoire National de Métrologie et d'Essais, France
08:50
Virtual Testing Method for Static ADC Non-Linearity – RSD Cyclic A/D Converter Case (174)
Ondřej Šubrt, ASICentrum/Faculty of Electrical Engineering CTU in Prague, Circuit Theory Dept., Czech Republic
Miloslav Kubař, ASICentrum/Faculty of Electrical Engineering CTU in Prague, Microelectronics Dept., Czech Republic
Pravoslav Martinek, CTU in Prague, Faculty of Electrical Engineering, Circuit Theory Dept., Czech Republic
Jiří Jakovenko, CTU in Prague, Faculty of Electrical Engineering, Microelectronics Dept., Czech Republic
09:10
Statistical Analysis of the Word Error Rate Measurement in Analog-to-Digital Converters (204)
Andrea Zanobini, University of Florence, Department of Electronics and Telecommunications, Italy
Lorenzo Ciani, University of Florence, Department of Electronics and Telecommunications, Italy
09:30
ADC Functional Testing Using Artificial Immune Systems (483)
Cleonilson Protásio de Souza, Federal Institute of Maranhão, Brazil
Cláudio Leão Torres, Federal Institute of Maranhão, Brazil
Raimundo C. S. Freire, Federal University of Campina Grande, Brazil
Francisco M. de Assis, Federal University of Campina Grande, Brazil
73
TC14 Oral Session 1
Wednesday, 08:30 to 09:50 – Infante D. Henrique Room
TC14 – MEASUREMENT OF FORM DEVIATION
Co-Chairs: Yasuhiro Takaya, Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Japan
08:30
Roundness Measurement Capability and Traceability at NIMT (36)
Samana Piengbangyang, National Institute of Metrology, Thailand
Thammarat Somthong, National Institute of Metrology, Thailand
Jariya Buajarern, National Institute of Metrology, Thailand
Anusorn Tonmueanwai, National Institute of Metrology, Thailand
08:50
The Bird-Cage Method Used for Measuring Cylindricity - A Problem of Optimal Profile Matching (150)
Dariusz Janecki, Kielce University of Technology, Poland
Jarosław Zwierzchowski, Kielce University of Technology, Poland
09:10
Laser Doppler Distance Sensor for Fast Shape Measurements at Rotating Objects (383)
Jürgen Czarske, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany
Thorsten Pfister, TU Dresden, Professur Mess- und Prüftechnik, Germany
Lars Büttner, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany
09:30
Minimization of the Uneven Sampling Effects on Evaluating Roundness with Coordinate Measuring Machines (639)
Francisco Augusto Arenhart, Universidade Federal de Santa Catarina, Brazil
Gustavo Daniel Donatelli, Fundação CERTI, Brazil
Mauricio de Campos Porath, Fundação CERTI, Brazil
74
TC18
Wednesday, 08:30 to 09:50 – Fernão Mendes Pinto Room
TC18 – MEETING
on
Measurement of Human Functions
TC18
75
TC22
Wednesday, 08:30 to 09:50 – Fernão de Magalhães Room
TC22 – MEETING
on
Vibration Measurement
TC22
76
TC1 Oral Session 1
Wednesday, 11:00 to 12:20 – Bartolomeu Dias Room
TC1 – ORGANISATIONAL ASPECTS OF METROLOGY EDUCATION
Co-Chairs: Susanne Toepfer, Carl Zeiss AG, Germany
Dietrich Hofmann, Technology- and Innovation Park Jena GmbH, Germany
11:00
Doctoral Degree Study of Measurement and Instrumentation in the Czech Republic (140)
Vladimir Haasz, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
11:20
Development of User Group Specific Training Concepts for Metrology in Industrial Application (422)
Teresa Werner, Friedrich-Alexander-University Erlangen-Nuremberg, Germany
11:40
Metrology Education in the Curriculum of the Accredited Bachelor in Engineering Programme of the “Vrije
Universiteit Brussel” (564)
Leo Van Biesen, Vrije Universiteit Brussel, Belgium
77
ROUND TABLE ON CONTINUOUS AND DYNAMIC CALIBRATION IN FORCE AND TORQUE
Co-Chairs: Rolf Kumme, Physikalisch-Technische Bundesanstalt (PTB), Germany
Yon-Kyu Park, Force Measurement & Evaluation Lab., KRISS, Korea
78
Co-Chairs: Linus Michaeli, Technical University of Kosice, Slovak Republic
11:00
Economical Test of Internal ADC in Embedded Systems (15)
Josef Vedral, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Jakub Svatoš, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Pavel Fexa, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
11:20
Signature Testing of Analog-to-Digital Converters (552)
Vadim Geurkov, Ryerson University, Canada
Valeri Kirischian, Ryerson University, Canada
Lev Kirischian, Ryerson University, Canada
11:40
Bias in ADC Terminal Based Gain and Offset Estimation Using the Histogram Method (472)
12:00
Advanced ADC Testing by Multiexponential Stimuli (191)
Linus Michaeli, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Jan Saliga, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Michal Sakmar, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Jan Busa, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
79
TC7 Oral Session 3
TC7 – APPLICATIONS
Co-Chairs: Gerhard Linß, TU Ilmenau, Germany
Kimmo Konkarikoski, Tampere University of Technology / Automation Science and Engineering, Finland
11:00
A Least Squares Problem in Gamma Ray Transmission Tomography (654)
Carlos C. Dantas, Departamento de Energia Nuclear DEN - Universidade Federal de Pernambuco UFPE, Brazil
Bruna G. M. Araújo, Departamento de Energia Nuclear DEN - Universidade Federal de Pernambuco UFPE, Brazil
Valdemir A. dos Santos, Departamento de Química - Universidade Católica de Pernambuco, Brazil
Christine L. L. Finkler, Departamento de Química - Universidade Católica de Pernambuco, Brazil
Eric F. de Oliveira, Centro de Informática da Universidade Federal de Pernambuco CIN / UFPE, Brazil
Silvio B. Melo, Centro de Informática -Universidade Federal de Pernambuco, Brazil
M. Graça dos Santos, Instituto Superior Técnico, Portugal
11:20
Electromagnetic Phantom Design for Measurement and Imaging Quality Testing Using NMR Imaging Methods (260)
Ivan Frollo, Institute of Measurement Science, SAS, Bratislava, Slovakia
Peter Andris, Institute of Measurement Science, SAS, Bratislava, Slovakia
Jiri Přibil, Institute of Measurement Science, SAS, Bratislava, Slovakia
Lubomir Vojtisek, Institute of Measurement Science, SAS, Bratislava, Slovakia
Zuzana Holubekova, Institute of Measurement Science, SAS, Bratislava, Slovakia
11:40
Estimation of Basis Weight of Paper: Light Transmittance Measurements over Eight Orders of Magnitude of Spatial
Scale (132)
Jukka-Pekka Raunio, Tampere University of Technology, Finland
12:00
Linear Fitting Procedures Applied to Refractometry of Aqueous Solutions (560)
Olivier Pellegrino, Instituto Português da Qualidade, Portugal
Andreia Furtado, Instituto Português da Qualidade, Portugal
80
TC13
TC13 – MEETING
on
Measurements in Biology and Medicine
TC13
81
TC18 Oral Session 1
TC18 – QUALITY MEASUREMENT AND EVALUATION
Co-Chairs: Timo Salpavaara, Department of Automation Science and Engineering, Tampere University of Technology, Finland
Boby George, Institute of Electrical Measurement and Measurement Signal Processing, Graz University of Technology,
Austria.
11:00
A Method for Seat Occupancy Detection for Automobile Seats with Integrated Heating Elements (251)
Boby George, Graz University of Technology, Austria
Hubert Zangl, Graz University of Technology, Austria
Thomas Bretterklieber, Graz University of Technology, Austria
Georg Brasseur, Graz University of Technology, Austria
11:20
Wireless Insole Sensor System for Plantar Force Measurements During Sport Events (283)
Timo Salpavaara, Tampere University of Technology, Finland
Jarmo Verho, Tampere University of Technology, Finland
Jukka Lekkala, Tampere University of Technology, Finland
Jouko Halttunen, Tampere University of Technology, Finland
11:40
Model Develompent to Predict Perceived Degree of Naturalness (395)
Agnieszka Bialek, National Physical Laboratory, United Kingdom
Teresa Goodman, National Physical Laboratory, United Kingdom
Ruth Montgomery, National Physical Laboratoty, United Kingdom
Martin Rides, National Physical Laboratory, United Kingdom
Gerie van der Heijden, Biometris, Wageningen University, The Netherlands
Hilko van der Heijden, Biometris, Wageningen University, The Netherlands
Gerrit Polder, Biometris, Wageningen University, The Netherlands
Krista Overvliet, Parc Científic de Barcelona, Universitat de Barcelona, Spain
12:00
Attempts to Diminish Uncertainty in Quality Evaluation of Compressed Video by Human Audience (659)
Anna Ostaszewska, Warsaw University of Technology, Poland
Sabina Żebrowska-Łucyk, Warsaw University of Technology, Poland
82
TC4 Oral Session 9
TC4 – POWER AND ENERGY MEASUREMENTS
Co-Chairs: Mario Savino, Dean of Engineering Faculty, Politecnico di Bari, Italy
13:40
On the Calibration of Reactive Energy Meters Under Non Sinusoidal Conditions (688)
Antonio Cataliotti, Dep. of Electrical, Electronic and Telecommunication Engineering, Univ. di Palermo, Italy
Valentina Cosentino, Dep. of Electrical, Electronic and Telecommunication Engineering, Univ. di Palermo, Italy
Alessandro Lipari, Dep. of Electrical, Electronic and Telecommunication Engineering, Univ. di Palermo, Italy
Salvatore Nuccio, Dep. of Electrical, Electronic and Telecommunication Engineering, Univ. di Palermo, Italy
14:00
Accurate Digital Three-Phase Electricity Meter and Generator (185)
Branislav Lojko, FEI, Slovak University of Technology, Bratislava, Slovakia
Jan Hribik, FEI, Slovak University of Technology, Bratislava, Slovakia
Peter Fuchs, FEI, Slovak University of Technology, Bratislava, Slovakia
Miloslav Hruskovic, FEI, Slovak University of Technology, Bratislava, Slovakia
14:20
Power Performance Evaluation of an Electric Home Fan with TRIAC-Based Automatic Speed Control System (664)
Inácio Bianchi, São Paulo State University, Department of Electrical Engineering, Brazil
Paulo Magalhães Filho, São Paulo State University, Department of Energy, Brazil
José Pinto Ferreira Sobrinho, São Paulo State University, Department of Energy, Brazil
14:40
A New Approach to Demand Measurement over the Electricity Distribution Network (672)
José Santo Guiscafré Panaro, UFF – Universidade Federal Fluminense, Brazil
15:00
The Dependence of the Inrush Current of a Transformer Upon Switching off/on Phases (380)
Andrzej Dobrogowski, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland
Przemyslaw Lisowski, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland
83
TC7 Oral Session 4
TC7 – METHODOLOGY
Co-Chairs: Klaus-Dieter Sommer, Physikalisch-Technische Bundesanstalt (PTB), Germany
Dietrich Hofmann, Technology- and Innovation Park Jena GmbH, Germany
13:40
Reveal and Systematization of Quantities Transformation Methods (192)
Vladimir Kneller, Institute of Control Sciences of Russian Academy of Sciences, Russia
14:00
Properties of Fuzzy Nominal Scales (540)
Eric Benoit, LISTIC - Universite de Savoie, France
14:20
Measurement in a Point Versus Measurement over an Interval (480)
Vladimir Vujicic, Faculty of Technical Sciences, Novi Sad, Serbia
Ivan Župunski, Faculty of Technical Sciences, Novi Sad, Serbia
Zoran Mitrovic, Faculty of Technical Sciences, Novi Sad, Serbia
M. Sokola, School of Professional Higher Technical Education, Novi Sad, Serbia
14:40
Some Comments on Reference Data Set Generation in Passing (593)
Halina Nieciag, The Institute of Advanced Manufacturing Technology, Poland
Zbigniew Chuchro, The Institute of Advanced Manufacturing Technology, Poland
15:00
Closed-Form Equations to Design Single Sampling Plans for Isolated Lots (341)
Giuseppe Cavone, Polytechnic of Bari, Italy
Laura Fabbiano, Polytechnic of Bari, Italy
Nicola Giaquinto, Polytechnic of Bari, Italy
84
TC12
TC12 – MEETING
on
Temperature and Thermal Measurements
TC12
85
TC16 Oral Session 1
TC16 – PRESSURE METROLOGY
Co-Chairs: Tokihiko Kobata, National Metrology Institute of Japan, AIST, Japan
Marcello Caravaggio, SCANDURA & FEM, Italy
13:40
The CEM Laser Interferometer Mercury Manobarometer (242)
Salustiano Ruiz, Centro Español de Metrología, Spain
Maria Nieves Medina, Centro Español de Metrología, Spain
Roberto Calvo, Fundación Tekniker, Spain
14:00
The Calibration of a Differential Pressure Transducer at the Operating Pressure with a Pressure Amplifier (494)
L. A. Di Salvio, Petrobras, UN-BC/ATP-C/ISUP, Brazil
A. F. Orlando, Orlando, A.F., DEM-PósMQI, Brazil
14:20
Enhancement of the Measurement Characteristics of Pressure Transducers Up to 15000 bar Through Monolithic
Measuring Design and Foil Strain Gages (248)
Markus Haller, Hottinger Baldwin Messtechnik GmbH, Germany
Wolfgang Viel, Hottinger Baldwin Messtechnik GmbH, Germany
André Schäfer, Hottinger Baldwin Messtechnik GmbH, Germany
14:40
Development of Dynamic High Pressure Seal Up to 500 MPa (235)
In-Mook Choi, KRISS, Korea
Sam-Yong Woo, KRISS, Korea
Han-Wook Song, KRISS, Korea
Boo-Shik Kim, KRISS, Korea
Ho-Young Lee, KRISS, Korea
15:00
Development of Weight Handling Device for APMP Absolute Pressure Intercomparison, APMP.M.P-K9 (309)
Sam-Yong Woo, KRISS, Korea
In-Mook Choi, KRISS, Korea
Boo-Shik Kim, KRISS, Korea
15:20
Experimental Evaluation of the Clamping Pressure Distribution in a PEM Fuel Cell Using Matrix-Based Piezoresistive
Thin-Film Sensors (219)
Roberto Montanini, University of Messina, Italy
Gaetano Squadrito, CNR Institute for Transformation and Storage of Energy, Italy
Giosue Giacoppo, CNR Institute for Transformation and Storage of Energy, Italy
86
TC18 Oral Session 2
TC18 – MEASUREMENT AND MODELLING OF HUMAN MOVEMENTS
Co-Chairs: Yasuharu Koike, Precision & Intelligence Laboratory, Tokyo Institute of Technology, Japan
Koji Ito, Department of Computational Intelligence and System Science, Tokyo Institute of Technology, Japan
13:40
The Dynamic Optimization of STS Movement (198)
Hiroshi Yamasaki, Tokyo Institute of Technology, Japan
Hiroyuki Kambara, Tokyo Institute of Technology, Japan
Yasuharu Koike, Tokyo Institute of Technology, Japan
14:00
Coordination of Focal Arm Movements and Postural Stabilization in Whole Body Reaching: A Computational Model
(221)
Jacopo Zenzeri, Neurolab, DIST, via Opera Pia 13, University of Genova, Italy
Vishwanathan Mohan, Italian Institute of Technology, Italy
Pietro Morasso, University of Genova - DIST, Italy
14:20
Muscular Sensation Induce Event Related Desynchronization (ERD) on Foot Motor Area (308)
Mitsuru Takahashi, Dep. of Computational Intelligence and System Science, Tokyo Institute of Technology, Japan
Manabu Gouko, Dep. of Computational Intelligence and System Science, Tokyo Institute of Technology, Japan
Koji Ito, Dep. of Computational Intelligence and System Science, Tokyo Institute of Technology, Japan
14:40
Measurement Set Up for the Experimental Study of the Dynamics of Hopping (432)
Francesco Crenna, Università degli Studi di Genova - DIMEC, Italy
Giovanni Battista Rossi, Università degli Studi di Genova - DIMEC, Italy
Luca Bovio, Università degli Studi di Genova - DIMEC, Italy
15:00
Definition of a Protocol for Geometric and Kinematic Measurements to Assess Wheelchair Propulsion (568)
Angelo Basteris, Department of Informatics, Systems and Telematics (University of Genova), Italy
Gabriele Vigo, Physical Medicine and Rehabilitation Unit (Hospital ‘S. Corona’), Pietra Ligure, Italy
Carmelo Lentino, Physical Medicine and Rehabilitation Unit (Hospital ‘S. Corona’), Pietra Ligure, Italy
Vittorio Sanguineti, Department of Informatics, Systems and Telematics (University of Genova), Italy
15:20
Reaction Time Measurement Applied to Multimodal Human Control Modeling (675)
Edwardo Arata Y. Murakami, National Institute of Advanced Industrial Science and Technology (AIST), Japan
87
TC22 Oral Session 1
TC22 – TECHNOLOGY AND UNCERTAINTY
Co-Chairs: Thomas Bruns, Physikalisch-Technische Bundesanstalt (PTB), Germany
Eyüp Bilgiç, Tübitak Ulusal Metroloji Enstitüsü (UME), Turkey
13:40
Estimation of Uncertainty Contribution of Transverse Sensitivity and Vibration Distribution on Primary
Accelerometer Calibration (95)
Akihiro Oota, National Metrology Institute of Japan, AIST, Japan
Takashi Usuda, National Metrology Institute of Japan, AIST, Japan
Hideaki Nozato, National Metrology Institute of Japan, AIST, Japan
Tamio Ishigami, National Metrology Institute of Japan, AIST, Japan
Tsuneo Kikuchi, National Metrology Institute of Japan, AIST, Japan
14:00
ISO 16063-11: Uncertainties in Primary Vibration Calibration by Laser Interferometry. Reference Planes and
Transverse Motion (295)
Torben Licht, Bruel & Kjear, Denmark
Sven Erik Salbøl, DPLA and Brüel & Kjaer S&V, Denmark
14:20
Two Shock Machine Simulations Prestudy for Primary Low Level Shock Calibration System (310)
Jiun-Kai Chen, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Chao-Jung Chen, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Yeu-Jong Huang, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Hsin-Chia Ho, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
14:40
Real-Time Dynamic Error Compensation of Accelerometers by Digital Filtering (58)
Thomas Bruns, Physikalisch-Technische Bundesanstalt (PTB), Germany
15:00
Calibration of Accelerometers Using Parameter Identification – Targeting a Versatile New Standard (118)
Franko Schmähling, Physikalisch-Technische Bundesanstalt (PTB), Germany
Holger Nicklich, SPEKTRA Schwingungstechnik und Akustik GmbH Dresden, Germany
15:20
Analysis of Type A Uncertainties in Primary Accelerometer Calibrations Applying the Sine-Approximation Method
(421)
Gustavo Ripper, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Ronaldo Dias, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
88
Poster Session 1
POSTER SESSION 1 (TC1, TC2, TC3, TC19)
Laboratory of Analog Signal Processing and Digitizing at FEE CTU in Prague (137)
Josef Vedral, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Jakub Svatoš, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Pavel Fexa, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
A Pioneer Metrology Technical Course in the Latin America (224)
Gelson M. Rocha, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
R. P. Landim, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Internet-Based Remote Control of the Oscilloscope by a Thin Client (403)
Domen Hudoklin, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
A Remote Monitoring System to Improve Educational Activities of Visually Impaired Students (471)
Bruno Andò, DIEES- University of Catania, Italy
Salvatore Baglio, DIEES- University of Catania, Italy
S. La Malfa, Engineering Faculty, D.I.E.E.S. University of Catania, Italy
Nicola Pitrone, Engineering Faculty, D.I.E.E.S. University of Catania, Italy
The Measuring Instrument with Distributed Data Processing (663)
Jakub Bach, Gdynia Technical University, Poland
Romuald Masnicki, Gdynia Technical University, Poland
Janusz Mindykowski, Gdynia Maritime University, Poland
Quantum Well Width as an Uncertainty Source in Electronic Transitions: A Simulated Approach (136)
José Manzoli, IPEN-CNEN/SP, Brazil
Eduardo Moura, IPEN-CNEN/SP, Brazil
PMD Source: A Proposal for a Reference Standard Development (146)
Alexandre Bessa dos Santos, INMETRO – DIMCI/Telecommunication Division, Brazil
Giovanna Borghi, INMETRO – DIMCI/Optical Metrology Division, Brazil
Janaina Ferreira, INMETRO – DIMCI/Telecommunication Division, Brazil
Jean Pierre von der Weid, Center for Telecommunications Studies/PUC-Rio, Brazil
Parallel Glass Plate Test with the use of the Phase Shift Technique in the Optical Vortex Interferometer (288)
Wojciech Frączek, Electronic and Photonic Metrology, Wrocław University of Technology, Poland
Ewa Frączek, Electronic and Photonic Metrology, Wrocław University of Technology, Poland
Janusz Mroczka, Wrocław University of Technology, Poland
Phase Measurement of Optical Wavefront by an SLM Differentiation Filter (333)
Hideo Furuhashi, Aichi Institute of Technology, Japan
Javier Valle Mayorga, Aichi Institute of Technology, Japan
Yoshiyuki Uchida, Aichi Institute of Technology, Japan
Akihiro Kono, Nagoya University, Japan
89
Detection of Subwavelength Structure Profile by Decomposition of Muellar Matrix (618)
Yasuhiro Mizutani, The University of Tokushima, Japan
Yoshiyuki Uehane, Tokyo University of Agriculture and Technology, Japan
Tomohito Kuwagait, Tokyo University of Agriculture and Technology, Japan
Yukitoshi Otani, Tokyo University of Agriculture and Technology, Japan
Norihiro Umeda, Tokyo University of Agriculture and Technology, Japan
Analysis of a Feedback Driver for Semiconductor Light Sources (674)
Andrzej Odon, Poznan University of Technology, Poland
Thermal Desorption Mass Spectrometry (TDS): Application on Mass Metrology (25)
Zaccaria Silvestri, Laboratoire Commun de Metrologie LNE-CNAM, France
Patrick Pinot, Laboratoire Commun de Metrologie LNE-CNAM, France
Design, Fabrication and Electromechanical Characteristics of a MEMS Based Micromirror (28)
Talari Rambabu, Electrical Engineering Department , Jadavpur University, India
Mita Dutta, Electrical Engineering Department, Jadavpur University, India
Dissemination of the Unit of Mass in a Fully Automatic Mass Laboratory Using Subdivision (123)
Zoltán Zelenka, BEV- Bundesamt für Eich- und Vermessungswesen, Austria
Subdivision Method Applied for OIML Weights Using an Automatic Comparator (149)
Adriana Valcu, National Institute of Metrology, Romania
Dumitru Dinu, Romanian Bureau of Legal Metrology, Romania
New Automatic Calibration System for Large Masses (241)
José Ángel Robles Carbonell, Spanish Metrology Centre (CEM), Spain
Alfonso Lobo Robledo, Spanish Metrology Centre (CEM), Spain
Comparison Among Methods Employed in the Calibration of High Accuracy Mass Standards and Uncertainty
Validation by Numerical Simulation (276)
Lautaro Ramirez, Universidad de Costa Rica, Costa Rica
Luis Omar Becerra, Centro Nacional de Metrología, Mexico
Luis Manuel Peña, Centro Nacional de Metrología, Mexico
Development of a Measurement System of the Friction Coefficient on the Skin of the Human Hand Using Load Cell
(302)
Yon-Kyu Park, KRISS, Korea
Sam Yong Woo, KRISS, Korea
Investigation and Calibration of a Force Vector Sensor with a Calibration Artefact (387)
Sara Lietz, Physikalisch-Technische Bundesanstalt (PTB), Germany
Falk Tegtmeier, Physikalisch-Technische Bundesanstalt (PTB), Germany
Dirk Röske, Physikalisch-Technische Bundesanstalt (PTB), Germany
Daniel Schwind, Gassmann Testing and Metrology, Germany
90
Use of Mirage Effect for the Detection of Adsorption of Organic Molecules on the Surface Pt – 10% Ir Alloy of Mass
Standard (409)
Riadh Hannachi, Laboratoire Commun de Métrologie LNE-CNAM, France
Zaccaria Silvestri, Laboratoire Commun de Métrologie LNE-CNAM, France
Daniel du Colombier, Laboratoire Commun de Métrologie LNE-CNAM, France
Patrick Pinot, Laboratoire Commun de Métrologie LNE-CNAM, France
Identification of the Parameters that Influence the Uncertainty Sources in Ortophaedic Implants Fatigue Tests (425)
Rafael Soares de Oliveira, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Ana Rosa Martins, Technological Institute of the Catholic University of Rio de Janeiro, Brazil
Carlos Rodrigo Roesler, University Hospital of the Federal University of Santa Catarina, Brazil
Ieda Caminha, National Institute of Technology, Brazil
Equipment for Determining Aerodynamic Forces on Flapping Wings (470)
Dan Mihai Ştefănescu, Romanian Measurement Society, Romania
Valentin Butoescu, National Institute for Aerospace Research “Elie Carafoli”, Bucharest, Romania
Investigation of Influence Quantity for Reading Stability on Magnetic Susceptometer (542)
Wang Jian, Mechanics and Acoustics Division, National Institute of Metrology, China
Yao Hong, Mechanics and Acoustics Division, National Institute of Metrology, China
Zhang Yue, Mechanics and Acoustics Division, National Institute of Metrology, China
Cai Changqing, Mechanics and Acoustics Division, National Institute of Metrology, China
Ding Jingan, Mechanics and Acoustics Division, National Institute of Metrology, China
Design and Development of Precision Artifact for Dissemination of Low Forces of 1 N and 2 N (563)
S. S. K. Titus, Force and Hardness Standard, National Physical Laboratory, India
Kamlesh K. Jain, Force and Hardness Standard, National Physical Laboratory, India
S. K. Dhulkhed, Depart. of Mechanical Engineering, SDM College of Engineering & Technology, India
Poonam Yadav, Force and Hardness Standard, National Physical Laboratory, India
Preparation for a Comparison of Platinum-Iridium kilogram Mass Standard Among NMIs in APMP (576)
Jin Wan Chung, KRISS, Korea
Sungjun Lee, KRISS, Korea
Kwang Pyo Kim, KRISS, Korea
Exchange of Experiences Between INRIM and IPQ in the Density Field (583)
Salvatore Lorefice, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Maria do Céu Ferreira, Portuguese Institute for Quality, Central Laboratory of Metrology - IPQ, Portugal
Multivariable Transducer Interfacing Circuit for Wireless Monitoring of Smart Implants (10)
Sheroz Khan, Department of ECE (International Islamic University Malaysia), Malaysia
A. H. M. Zahirul Alam, Department of ECE (International Islamic University Malaysia), Malaysia
Zuraidah Zainudin, Department of ECE (International Islamic University Malaysia), Malaysia
Muzna S. Khan, Department of ECE (International Islamic University Malaysia), Malaysia
Shihab Abdel Hameed, Department of ECE (International Islamic University Malaysia), Malaysia
Aisha Hassan Abdalla, Department of ECE (International Islamic University Malaysia), Malaysia
Mohd. Rafiqul Islam, Department of ECE (International Islamic University Malaysia), Malaysia
Industrial Turbidimeters with Automatic Cleaning of Measuring Cells (82)
Vladimir Fetisov, Ufa State Aviation Technical University, Russia
Olga Melnichuk, Ufa State Aviation Technical University, Russia
91
High Precision Delivery of a Water Capsule: Theoretical Model, Numerical Description, Control System and Results of
Field Experiments (167)
Grzegorz Śmigielski, Szkoła Wyzsza im. Pawła Włodkowica, Institute of Applied Informatics, Poland
Roman Dygdała, Szkoła Wyzsza im. Pawła Włodkowica/Uniw. Kazimierza Wielkiego, Inst. of Mathematics, Poland
Mieczysław Kunz, Uniwersytet Mikołaja Kopernika, Institute of Geography, Poland
Damian Lewandowski, Szkoła Wyzsza im. Pawła Włodkowica, Institute of Applied Informatics, Poland
Krzysztof Stefański, Uniwersytet Mikołaja Kopernika, Collegium Medicum, Poland
Data Processing and Probability Models of Wind Gusts (209)
Michal Návorka, Dep. of Tech. and Meas., Fac. of Electrical Engineering, Univ. of West Bohemia, Czech Republic
Olga Tůmová, Dep. of Tech. and Meas., Fac. of Electrical Engineering, Univ. of West Bohemia, Czech Republic
Gas Analyzers Calibration by Dynamic Dilution for Monitoring Air Pollution and Air Emissions (222)
Nuno Rodrigues, Sondar, Amostragens e Tecnologias do Ar, Lda., Portugal
Paulo Gomes, Sondarlab, Lda., Portugal
Eduardo Fernandes, Sondar, Amostragens e Tecnologias do Ar, Lda., Portugal
Carlos Pedro Ferreira, Sondar, Amostragens e Tecnologias do Ar, Lda., Portugal
João Sampaio, Sondar, Amostragens e Tecnologias do Ar, Lda., Portugal
A Method for the Calibration of the Track Detectors Used in Radon Environment Measurement (361)
Elena Iliescu, Horia Hulubei National Institute for R&D in Physics and Nuclear Engineering, Romania
Sorin Bercea, Horia Hulubei National Institute for R&D in Physics and Nuclear Engineering, Romania
Aurelia Celarel, Horia Hulubei National Institute for R&D in Physics and Nuclear Engineering, Romania
Constantin Cenusa, Horia Hulubei National Institute for R&D in Physics and Nuclear Engineering, Romania
Aplication of 2k Factorial Design in Wastewater Decolorization Research (391)
Ales Hribernik, University of Maribor, Faculty of Mechanical Engineering, Slovenia
Maja Bauman, University of Maribor, Faculty of Mechanical Engineering, Slovenia
Aleksandra Lobnik, University of Maribor, Faculty of Mechanical Engineering, Slovenia
Uncertainty Investigation of Field Measurements of Airborne Sound Insulation (394)
Ranny Michalski, Acoustic Testing Laboratory - INMETRO / UFRJ, Brazil
Marco Nabuco, Acoustic Testing Laboratory - INMETRO / UFRJ, Brazil
Monitoring of the Soil Status Using Electrical Impedance Spectrometry Method Developed in Project E!3838 of the
Europe International Program EUREKA (443)
Jana Parilkova, Faculty of Civil Engineering, Brno University of Technology, Czech Republic
Jaroslav Vesely, Faculty of Civil Engineering, Brno University of Technology, Czech Republic
Jiri Pavlik, GEOtest Brno, Inc., Czech Republic
Radek Stoklasek, Czech Republic
Environmental and Pollutants Gas Analyzers (452)
Ana Madeira, Instituto Português da Qualidade, Portugal
Florbela A. Dias, Instituto Português da Qualidade, Portugal
Automated Measuring System Based on Optical Sensors for Water Analysis (557)
Artur Dybko, Warsaw University of Technology, Poland
Comparative Investigations of Two Kind of Electronic Circuit for Multichannel SAW-Based Gas Sensors (581)
Henryk Urzędniczok, Silesian Univ. of Technology, Institute of Measurement Science, Electronics and Control, Poland
92
Signal Validation in Measurements in Underwater Environment (614)
Wieslaw Kicinski, Nicolaus Copernicus University, Institute of Physics, Poland
Distiction of Landslide by Autonoumous Node in Wireless Sensing Network (648)
Shigeru Takayama, Ritsumeikan University BKC, Japan
Yasutaka Nakajima, Ritsumeikan University BKC, Japan
Riki Ohbayashi, Ritsumeikan University BKC, Japan
Komyo Kariya, Ritsumeikan University BKC, Japan
93
TC1 Oral Session 2
TC1 – TRAINING SYSTEMS FOR METROLOGY EDUCATION
Roman. Z. Morawski, Warsaw University of Technology, Faculty of Electronics and Information Technology, Institute of
16:20
A Novel Approach for Teaching Digital Image Processing Based on a New Multi-Scalable Hardware Platform (115)
Maik Rosenberger, Ilmenau University of Technology, Germany
Mathias Schellhorn, Ilmenau University of Technology, Germany
Martin Correns, Ilmenau University of Technology, Germany
Maik Schumann, Ilmenau University of Technology, Germany
Michael Vogel, Ilmenau University of Technology, Germany
16:40
Demonstrational System for Training in FlexRay Communication (271)
Jan Malinsky, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Petr Kocourek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
17:00
Development of Remote Controlled Virtual Laboratory (326)
Angela Varadine Szarka, University of Miskolc, Hungary
17:20
Remote Laboratory for FPGA Based Reconfigurable Systems Testing (190)
Milos Drutarovsky, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Jan Saliga, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Linus Michaeli, Technical University of Košice, Faculty of Electrotechnic and Informatics, Slovakia
Ingrid Hroncová, Ixonos Slovakia s.r.o., Slovakia
17:40
A Comprehensive Simulation Software for Teaching Camera Calibration (459)
David Samper, University of Zaragoza, Spain
Jorge Santolaria, University of Zaragoza, Spain
Jorge Juan Pastor, University of Zaragoza, Spain
Juan José Aguilar, University of Zaragoza, Spain
94
TC2 Oral Session 3
TC2 – LIGHT SOURCES AND DETECTORS
José Rebordão, National Institute of Engineering, Technology and Innovation (INETI), Aerospace Laboratory (LAER),
Faculdade de Ciências da Universidade de Lisboa, Portugal
16:20
Measurement of Iodine Cell Purity and Absolute Frequency Shifts for Laser Stabilization (638)
Jan Hrabina, Institute of Scientific Instruments, Academy of Sciences of the Czech Republic, Czech Republic
Josef Lazar, Institute of Scientific Instruments, Academy of Sciences of the Czech Republic, Czech Republic
Petr Jedlička, Institute of Scientific Instruments, Academy of Sciences of the Czech Republic, Czech Republic
Ondřej Číp, Institute of Scientific Instruments, Academy of Sciences of the Czech Republic, Czech Republic
16:40
Ultra-Stable Visible Laser Source Based on Comb-Injection Locked DFB for Gauge Block Measurement (299)
Han Young Ryu, KRISS, Korea
Sung Hun Lee, KRISS, Korea
Tae Bong Eom, KRISS, Korea
H. Suh, KRISS, Korea
17:00
Ultra Stable Coherent Sources Based on Injection Locked DFB from a Femtosecond Fiber Laser Comb (300)
Sung Hun Lee, KRISS, Korea
Han Young Ryu, KRISS, Korea
Yong Pyong Kim, Kyung Hee University, Korea
17:20
Towards the Implementation of a Single-Photon Detector Absolute Calibration System with Correlated Photon-Pairs
(537)
T. Ferreira da Silva, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
I. B. Couceiro, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
H. P. H. Grieneisen, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Jean Pierre von der Weid, Center for Telecommunications Studies/PUC-Rio, Brazil
17:40
Passive Terahertz Microscopy with a Highly Sensitive Detector (98)
Yusuke Kajihara, The University of Tokyo, Japan
Takeji Ueda, The University of Tokyo, Japan
Patrick Nickels, The University of Tokyo, Japan
Susumu Komiyama, The University of Tokyo, Japan
18:00
Spatial Uniformity of the Silicon Photodiodes for Establishment of Spectral Responsivity Scale (103)
Luciana Alves, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Fabiana Reis, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Miguel Torres, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Giovanna Almeida, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Iakyra Couceiro, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
95
TC4
TC4 – MEETING
on
Measurement of Electrical Quantities
TC4
96
TC12 Oral Session 1
TC12 – PYROMETRY
Co-Chairs: Francesco Righini, INRIM Istituto Nazionale Ricerca Metrologica, Italy
Fumihiro Sakuma, Standard Radiation Thermometry Section, Temperature and Humidity Department, National
Metrology Institute of Japan, National Institute of Advanced Industrial Science and Industry, Japan
16:20
Temperature Coefficients of Topcon Radiation Thermometers (231)
Fumihiro Sakuma, National Institute of Advanced Industrial Science and Technology, Japan
16:40
Uncertainty Estimation of Size-of-Source Effect Measurement for 650 nm Radiation Thermometers (109)
Fumihiro Sakuma, National Institute of Advanced Industrial Science and Technology, Japan
Laina Ma, National Institute of Advanced Industrial Science and Technology, Japan
17:00
Uncertainty in the Temperature of Silicon Wafers Measured by Radiation Thermometry Based upon a Polarization
Technique (304)
Tohru Iuchi, Toyo University, Japan
Atsushi Gogami, School of Engineering, Toyo University, Kawagoe, Japan
17:20
Size of Source Effect of a Transfer Reference Thermometer Suitable for International Comparisons Near to Room
Temperature (233)
Yong Shim Yoo, KRISS, Korea
Bong-Hak Kim, KRISS, Korea
Chul-Woung Park, KRISS, Korea
Dong-Hoon Lee, KRISS, Korea
Seung-Nam Park, KRISS, Korea
17:40
Neural Network Based Correction of Infrared Thermal Imager for Short Distance Measurement (86)
Jian Sun, College of Mechatronics Engineering, China Jiliang University, China
Enhui Zheng, College of Mechatronics Engineering, China Jiliang University, China
Le Chen, College of Mechatronics Engineering, China Jiliang University, China
Yanyan Huang, College of Mechatronics Engineering, China Jiliang University, China
Yaqiong Fu, College of Mechatronics Engineering, China Jiliang University, China
97
TC21 Oral Session 3
TC21 – METROLOGY DATA ANALYSIS
Co-Chairs: Robert Douglas, National Research Council of Canada - Institute for National Measurement Standards, Canada
16:20
Adjustment of a Network of Fundamental Constants (449)
16:40
Comparison of Statistical Consistency and Metrological Consistency (500)
Raghu N. Kacker, National Institute of Standards and Technology (NIST), United States of America
Rüdiger Kessel, National Institute of Standards and Technology (NIST), United States of America
Xin Bian, National Institute of Metrology, China
17:00
Testing for Outliers Based on Bayes Rule (624)
Giampaolo E. D'Errico, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
17:20
Metrological Insights from International Comparison Data (631)
Alan G Steele, National Research Council of Canada - Institute for National Measurement Standards, Canada
A. Peruzzi, National Research Council of Canada - Institute for National Measurement Standards, Canada
J. E. Decker, National Research Council of Canada - Institute for National Measurement Standards, Canada
R. J. Douglas, National Research Council of Canada - Institute for National Measurement Standards, Canada
17:40
Data Reconciliation and the Singular Value Decomposition (649)
Christos L. Mitsas, Hellenic Institute of Metrology, Greece
98
TC22 Oral Session 2
TC22 – NEW SYSTEMS AND METHODS
Co-Chairs: Ian Veldman, NMISA, Metrologist: Acoustics, Ultrasound and Vibration, South Africa
Gustavo Ripper, INMETRO, Brazil
16:20
Progress in Development of Calibration Systems for Angular Vibration Pickups (200)
Wan-Sup Cheung, Fluid & Acoustics Centre / KRISS, Korea
Torben Licht, Bruel & Kjear, Denmark
16:40
A New System for Comparison Calibration of Vibration Transducers at Low Frequencies (294)
Dimas Teixeira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Cauê Ferreira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Ronaldo Dias, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
17:00
Primary Accelerometer Calibration in UME by Sine Approximation Method (381)
Eyüp Bilgiç, TUBITAK UME (National Metrology Institute), Turkey
Enver Sadikeğlu, TUBITAK UME (National Metrology Institute), Turkey
Baki Karaböce, TUBITAK UME (National Metrology Institute), Turkey
Cafer Kirbaş, TUBITAK UME (National Metrology Institute), Turkey
A. Izzet Turan, TUBITAK UME (National Metrology Institute), Turkey
17:20
The Need for Controlled Shocks - A New Type of Shock Exciter Allows to Apply Well Defined Mechanical Shocks (396)
Holger Nicklich, SPEKTRA Schwingungstechnik und Akustik GmbH Dresden, Germany
Martin Brucke, SPEKTRA Schwingungstechnik und Akustik GmbH Dresden, Germany
Michael Mende, SPEKTRA Schwingungstechnik und Akustik GmbH Dresden, Germany
17:40
Laser Vibrometer Calibration at High Frequencies Using Conventional Calibration Equipment (495)
Frank Blume, Physikalisch-Technische Bundesanstalt (PTB), Germany
Angelika Täubner, Physikalisch-Technische Bundesanstalt (PTB), Germany
18:00
Improved Low Frequency Accelerometer Calibration (662)
Mark Schiefer, The Modal Shop, Inc, United States of America
Richard Bono, The Modal Shop, Inc, United States of America
99
Poster Session 2
POSTER SESSION 2 (TC7, TC8, TC9, TC11, TC13, TC14)
Joint Scopes Activity of IMEKO and International Metrological Organizations Technical Committees (22)
Tetyana Gordiyenko, State Enterprise “UkrSREC”, Ukraine
Oleh Velychko, Ukrmetrteststandard, Ukraine
A Novell Method of Electronic Techniques for Solving High Speed Illumination in High Speed Measuring Setups (112)
André Göpfert, Ilmenau University of Technology, Germany
Steffen Lerm, Ilmenau University of Technology, Germany
Matthias Rückwardt, Ilmenau University of Technology, Germany
Automated Calibration Bench for Calibration of Radiation Thermometers (350)
Andraž Miklavec, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Valentin Batagelj, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Jovan Bojkovski, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Igor Pušnik, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Janko Drnovšek, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Spectral Reflectances of Log Ends for Camera Based Annual Ring Width Measurements (516)
Marjanen Kalle, Tampere University of Technology, Department of Automation Science and Engineering, Finland
Ojala Petteri, Tampere University of Technology, Department of Automation Science and Engineering, Finland
Mäkinen Martti, University of Joensuu, Department of Physics and Mathematics, Finland
Research on Interdependency of IC Variables (89)
Zhengle Shi, Wuhan Digital Engineering Institute, China
Wenjun Chang, Wuhan Digital Engineering Institute, China
A Portable System for the Calibration of Transducers and Torque Wrenches: The Calibration Bell (182)
Carlo Ferrero, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Angelo Chiapuzzi, Atlas Copco BLM, Italy
Traceability in Force Measurements from the Center to the Regional Laboratories (591)
S. S. K. Titus, Force and Hardness standard, National Physical Laboratory, India
Anil Kumar, Force and Hardness standard, National Physical Laboratory, India
H. N. P. Poddar, Force and Hardness standard, National Physical Laboratory, India
S. K. Jain, Force and Hardness standard, National Physical Laboratory, India
Kamlesh K. Jain, Force and Hardness standard, National Physical Laboratory, India
Metrological Approach in the Characterization of Viscosity of Corn Biodiesel Relative to Temperature, Using
Capillary Viscometers (645)
Alex Pablo Ferreira Barbosa, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
C. R. da Costa Rodrigues, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
D. M. do Espírito Santo Filho, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
José Renato Real Siqueira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Roberto Guimarães Pereira, PGMEC-UFF, Brazil
Luiz Henrique Paraguassú de Oliveira, Mechanical Metrology Divison, INMETRO, Brazil
100
Improved Synchronizing Procedure of PDAs to Delivery the Common Sense of the Time to Stand Alone
Measurement Instrument (681)
Domenico Luca Carnì, University of Calabria, Italy
Francesco Lamonaca, Università della Calabria, Italy
Guide for a Peer Review (698)
Jorge C. Torres-Guzmán, Centro Nacional de Metrología, Mexico
Miguel Viliesid-Alonso, Centro Nacional de Metrología, Mexico
Luis Omar Becerra-Santiago, Centro Nacional de Metrología, Mexico
Roberto Arias-Romero, Centro Nacional de Metrología, Mexico
Some Practical Aspects of Excitation Coil Design for Electromagnetic Flow Meter (45)
Andrzej Michalski, Electrical Fac., Warsaw Univ. of Technology/Electronics Fac., Military Univ. of Technology, Poland
Zbigniew Watral, Military University of Technology, Poland
Jan Sienkiewicz, Military University of Technology, Poland
Combined Measurement of Flow Velocity and Filling Within Fully Electromagnetic Flowmeter for Open Channels (63)
Jacek Jakubowski, Military University of Technology, Poland
Andrzej Michalski, Electrical Fac., Warsaw Univ. of Tech./Electronics Fac., Military Univ. of Technology, Poland
Water Surface Profile in Divided Channels Verified Experimentally (236)
Maurizio Leopardi, Faculty of Engineering - University of L'Aquila, Italy
Maria Teresa Todisco, Faculty of Engineering – L’Aquila, Italy
Gradually-Varied Flows in Open-Channel Networks (267)
Maria Teresa Todisco, Faculty of Engineering – L’Aquila, Italy
Real Life Ultrasonic Flowmeter Verification for Upstream Custody Transfer Metering Natural Gas (390)
Craig Coull, METCO Services Ltd, United Kingdom
Edmund Spearman, CNR International, United Kingdom
Jason Laidlaw, METCO Services Ltd, United Kingdom
Trends of Density Measurement by International Transport of Natural Gas - Direct or Indirect Measurement? (562)
Tomáš Hajduk, Czech Metrology Institute, Czech Republic
František Staněk, Czech Metrology Institute, Czech Republic
Dominik Pražák, Czech Metrology Institute, Czech Republic
Jiří Tesař, Czech Metrology Institute, Czech Republic
Zdeněk Krajíček, Czech Metrology Institute, Czech Republic
Analysis of Signal Network Non-Linearity in a Metrological Laboratory (376)
Stanislava Papezova, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic
A Routing Protocol with Distributed Topology Maintenance in Wireless Sensor Networks (602)
Andrzej Michalski, Electrical Fac., Warsaw Univ. of Technology/Electronics Fac., Military Univ. of Technology, Poland
Łukasz Makowski, Warsaw University of Technology, Poland
Performance Measurement of Medical Imaging Systems Based on Mutual Information Metric (31)
Eri Matsuyama, Dep. of Radiological Technology, Graduate School of Health Sciences, Niigata Univ., Japan
Du-Yih Tsai, Dep. of Radiological Technology, Graduate School of Health Sciences, Niigata Univ., Japan
Yongbum Lee, Dep. of Radiological Technology, Graduate School of Health Sciences, Niigata Univ., Japan
Katsuyuki Kojima, Dep. of Information Networks, Fac. of Administration and Informatics, Univ. of Hamamatsu, Japan
101
A Low-Cost Autosampler for Surface Plasmon Resonance Biosensor Platforms (305)
Cleumar Moreira, Dep. of Elec. Engineering, Univ. Federal de Campina Grande/Dep. of Electronics – IF-AL, Brazil
Arlindo Barreto Neto, IF-PB and Universidade Federal de Campina Grande, Brazil
L. C. Oliveira, Mechanical Metrology Divison, INMETRO, Brazil
Antonio Marcus Lima, Federal University of Campina Grande, Brazil
F. C. C. Loureiro, Dep. of Electrical Engineering, Universidade Federal de Campina Grande, Brazil
Helmut Neff, Universidade Federal de Campina Grande and CETENE/LINCS, Brazil
The Hybrid Pneumatic-Numerical Model of Lungs – Metrological Aspects of the Design (356)
Kozarski Maciej, Institute of Biocybernetics and Biomedical Engineering PAN, Poland
Krzysztof Zielinski, Institute of Biocybernetics and Biomedical Engineering PAN, Poland
Krzysztof, Jakub Palko, Institute of Biocybernetics and Biomedical Engineering PAN, Poland
Dominik Bozewicz, Institute of Precision and Biomedical Engineering Warsaw University of Technology, Poland
Marek Darowski, Institute of Biocybernetics and Biomedical Engineering PAN, Poland
Optimization Techniques in the Magnetic Resonance Imaging (360)
Francesco Adamo, Department of Electrics and Electronics - Polytechnic of Bari, Italy
Filippo Attivissimo, Department of Electrics and Electronics - Polytechnic of Bari, Italy
Anna M. L. Lanzolla, Polytechnic of Bari, Italy
Maurizio Spadavecchia, Department of Electrics and Electronics - Polytechnic of Bari, Italy
NIRS: Measuring Changes in Muscle Oxygenation and the Detection of Muscle Activity (436)
Vesna Geršak, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Gregor Geršak, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Experimental Investigations of Van Der Pauw Method Applied for Measuring Electrical Conductivity of Liquids (465)
Zbigniew Moroń, Institute of Biomedical Engineering and Instrumentation, Wrocław Univ. of Technology, Poland
Tomasz Grysiński, Institute of Biomedical Engineering and Instrumentation, Wrocław Univ. of Technology, Poland
A New Tracking System to Study the Behaviour of Species (518)
David Sarriá, Centre Tecnològic, SARTI, Vilanova i la Geltrú, Spain
Joaquín del Río, Centre Tecnològic, SARTI, Vilanova i la Geltrú, Spain
Xavier Roset, Centre Tecnològic, SARTI, Vilanova i la Geltrú, Spain
Jacopo Aguzzi, Institut de Ciències del Mar. CSIC, Spain
Francesc Sardà, Institut de Ciències del Mar. CSIC, Spain
Portable MP3 Player as Low-Cost Data Logger (532)
Samuel E. de Lucena, UNESP - São Paulo State University, Brazil
A Simple Bioelectrical Signal Simulator for Measurement Device Testing (634)
Antti Vehkaoja, Tampere University of Technology, Department of Automation Science and Engineering, Finland
The Analysis of the Geometry of Osseous Tissue of the Biological Bearings Interaction Zone in the Aspect of Accuracy
of Shape Mapping (668)
Andrzej Ryniewicz, Cracow University of Technology, Production Engineering Institute, Poland
The Geometry Estimation of the Articulation Cartilage Shape and Defect Diagnosis Using Magnetic Resonance
Imaging (669)
Anna M. Ryniewicz, Univ. of Mining and Metallurgy/Jagiellonian Univ., Dental Institute, Poland
Andrzej Ryniewicz, Cracow University of Technology, Production Engineering Institute, Poland
102
Analysis of Measurement Uncertainty in the Procedure of Groove Depth Measurement (111)
Gorana Baršić, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Biserka Runje, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Sanjin Mahović, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Holographic Prism – The New Plane Angle Measure on Base of Hologram Array in Crystalline Photochromic
Nano-Material (128)
Valery A. Granovsky, Central Scientific Research Institute "Elektropribor", Russia
Mikhail D. Kudryavtsev, Central Scientific Research Institute "Elektropribor", Russia
Alexandr I. Ryskin, St. Petersburg State University on Information Technology, Mechanics and Optics, Russia
Alexandr S. Shcheulin, St. Petersburg State University on Information Technology, Mechanics and Optics, Russia
Research on Accurate in Situ Measurements of Cylindricity (163)
Krzysztof Stepien, Kielce University of Technology, Poland
Stanislaw Adamczak, Kielce University of Technology, Poland
Coordinate Measurements of Complex-Shape Surfaces (168)
Andrzej Werner, Bialystok Technical University, Poland
Malgorzata Poniatowska, Bialystok Technical University, Poland
Probe Radius Compensation and Fitting Errors in CAD-Based Measurements of Free-Form Surface: A Case Study
(169)
Malgorzata Poniatowska, Bialystok Technical University, Poland
Andrzej Werner, Bialystok Technical University, Poland
Possibilities of Improving of Positional Precision of Machine Tools with Linear Axes (210)
Tomas Loebl, Slovak Univ. of Technology, Institute of automation measurement and Applied Informatics, Slovakia
Eva Kureková, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia
Rudolf Palenčár, Slovak Univ. of Technology, Institute of automation measurement and Applied Informatics, Slovakia
The Construction and Accuracy Analysis of the Multireference Equipment for Calibration of Angle Measuring
Instruments (243)
Domantas Brucas, Vilnius Gediminas Technical University, Lithuania
Vytautas Giniotis, Vilnius Gediminas Technical University, Lithuania
Experimental Check of the Simulated Cylinder’s Geometrical Characteristics Obtained from the Expert Program (312)
Michal Pawlowski, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Bartosz Gapinski, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Miroslaw Rucki, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Advanced Calibration Method for Pitch Artifact (314)
Yohan Kondo, Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology, Japan
Kazuyuki Sasajima, Tokyo Institute of Technology, Japan
Sonko Osawa, Dimensional Standards Section, National Metrology Institute of Japan, AIST, Japan
Osamu Sato, Dimensional Standards Section, National Metrology Institute of Japan, AIST, Japan
Tsukasa Watanabe, Dimensional Standards Section, National Metrology Institute of Japan, AIST, Japan
Performance Evaluation of Probing Systems in Data Capture for Kinematic Parameter Identification and Verification
of Articulated Arm Coordinate Measuring Machines (451)
Jorge Santolaria, University of Zaragoza, Spain
Juan José Aguilar, University of Zaragoza, Spain
Agustín Brau, University of Zaragoza, Spain
Francisco Javier Brosed, University of Zaragoza, Spain
103
Coordinate Measuring Machine Application for Machine Tool Correction (499)
Jan Chajda, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Bartosz Gapinski, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Krzysztof Matlinski, FOS POLMO Lodz S.A., Poland
Roman Staniek, Poznan University of Technology, Institute of Mechanical Technology, Poland
Michal Wieczorowski, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Dynamic Deviation Error in Single Flank Gear Testing (509)
Jan Chajda, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Miroslaw Grzelka, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Łukasz Mądry, Poznan University of Technology, Division of Metrology and Measuring Systems, Poland
Surface Quality of the EDM Processed Materials (587)
Marcel Sabin Popa, Technical University of Cluj Napoca, Romania
Gald Contiu, Technical University of Cluj Napoca, Romania
Grigore Pop, Technical University of Cluj Napoca, Romania
104
TC3 Oral Session 6
Thursday, 08:30 to 09:50 – Vasco da Gama Room
TC3 – TORQUE STANDARD MACHINES - NEW IDEAS AND DEVELOPMENTS
Co-Chairs: Diedert Peschel, Head of DKD lab DKD-K-47801 (torque), Head of DKD's TC Torque, Germany
Dirk Röske, Physikalisch-Technische Bundesanstalt (PTB), Germany
08:30
Sensitivity Evaluation of the Fulcrum in the 10 N•m Dead Weight Torque Standard Machine and Performance
Examination of a 1 N•m Torque Measuring Device (92)
Atsuhiro Nishino, National Metrology Institute of Japan, AIST, Japan
Koji Ogushi, National Metrology Institute of Japan, AIST, Japan
Kazunaga Ueda, National Metrology Institute of Japan, AIST, Japan
08:50
The Development of 100 Nm Torque Standard Machine at NIM (265)
Zhang Zhimin, National Institute of Metrology, China
Zhang Yue, National Institute of Metrology, China
Guo Bin, National Institute of Metrology, China
Meng Feng, National Institute of Metrology, China
Li Tao, ShangHai Marine Equipment Research Institute, China
Ji Honglei, ShangHai Marine Equipment Research Institute, China
Dai Ming, ShangHai Marine Equipment Research Institute, China
09:10
Suspended-Fulcrum Torque Standard Machine (373)
Tassanai Sanponpute, Torque Laboratory, Dep. of Mechanical Metrology, National Institute of Metrology, Thailand
Pramann Chantaraksa, Torque Laboratory, Dep. of Mechanical Metrology, National Institute of Metrology, Thailand
Nattapon Saenkhum, Torque Laboratory, Dep. of Mechanical Metrology, National Institute of Metrology, Thailand
Nittaya Arksonnarong, Torque Laboratory, Dep. of Mechanical Metrology, National Institute of Metrology, Thailand
09:30
The Torque Standard Machines in China (414)
Li Tao, Shanghai Marine Equipment Research Institute (SMERI), China
Dai Ming, Shanghai Marine Equipment Research Institute (SMERI), China
Lin Jing, Shanghai Marine Equipment Research Institute (SMERI), China
Zhang Yue, National Institute of Metrology, China
Zhang Zhimin, National Institute of Metrology, China
105
TC4 Oral Session 10
Thursday, 08:30 to 09:50 – Infante D. Henrique Room
TC4 – POWER QUALITY ASSESSMENT
Co-Chairs: Peter Händel, Signal Processing Lab, Royal Institute of Technology, Stockholm, Sweden
08:30
Accuracy Analysis of Voltage Dip Measurement (603)
Daniele Gallo, Dipartimento di Ingegneria dell’Informazione, Seconda Università di Napoli, Italy
Carmine Landi, Dipartimento di Ingegneria dell’Informazione, Seconda Università di Napoli, Italy
Mario Luiso, Dipartimento di Ingegneria dell’Informazione, Seconda Università di Napoli, Italy
08:50
Electrical Power Quality and Efficiency Diagnostic System (335)
Richárd Bátorfi, Univesity of Miskolc, Department of Electrical and Electronic Engineering, Hungary
09:10
Development of Digital Flicker Meter and Specification of Disturbance Propagation Direction (336)
Unhauzer Attila, Department of Electrical and Electronic Engineering, University of Miskolc, Hungary
09:30
Event-Based Distributed Measurement System for PQ Monitoring Applications (386)
Fabrizio Ciancetta, Dipartimento di Ingegneria Elettrica e dell’Informazione, University of L’Aquila, Italy
Edoardo Fiorucci, Dipartimento di Ingegneria Elettrica e dell’Informazione, University of L’Aquila, Italy
Giovanni Bucci, Dipartimento di Ingegneria Elettrica e dell’Informazione, University of L’Aquila, Italy
106
TC9
Thursday, 08:30 to 09:50 – Fernão Mendes Pinto Room
TC9 – MEETING
on
Flow Measurement
TC9
107
TC12 Oral Session 2
Thursday, 08:30 to 09:50 – Bartolomeu Dias Room
TC12 – FIXED POINTS
Co-Chairs: Davor Zvizdic, FSB-Faculty of Mechanical Engineering and Naval Architecture, LPM-Laboratory for Process
Measurements, Croatia
Renato Teixeira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Diretoria de
Metrologia Científica e Industrial, Divisão de Metrologia Térmica, Brazil
08:30
Performance Evaluation of an Open Zinc Cell Constructed at INMETRO (456)
Renato Teixeira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Hamilton Vieira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Rodrigo Silva, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
08:50
Realization of New Mercury Triple Point Cells at TUBITAK-UME (609)
Murat Kalemci, TUBITAK UME (National Metrology Institute), Turkey
Ahmet T. Ince, Yeditepe University, Turkey
Georges Bonnier, TUBITAK UME, France
09:10
Comparison of Different Methods of Fixed-Point Temperature Evaluation (586)
Gunter Krapf, Ilmenau University of Technology, Germany
Marc Schalles, Ilmenau University of Technology, Germany
09:30
Validation of Numerical Simulation of Freezing Point of Zinc (127)
Denise das Mercês Camarano, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Roberto Márcio de Andrade, Federal University of Minas Gerais, Brazil
108
TC14 Oral Session 2
Thursday, 08:30 to 09:50 – Pedro Álvares Cabral Room
TC14 – OPTICAL METROLOGY IN MANUFACTURING AND GEAR MEASUREMENTS
Co-Chairs: Albert Weckenmann, Chair Quality Management and Manufacturing Metrology, University Erlangen-Nuremberg,
Germany
Gerd Jäger, Ilmenau University of Technology, Germany
08:30
Workflow Based Process Modeling for Optical Coordinate Measurement (125)
Jörg Bargenda, Ilmenau University of Technology, Germany
Holger Weißensee, Ilmenau University of Technology, Germany
08:50
User Interface for Optical Multi-Sensorial Measurements at Extruded Profiles (129)
Johannes Bernstein, Quality Management and Manufacturing Metrology, University Erlangen-Nuremberg, Germany
09:10
A Novel Artifact for Evaluating Accuracies of Gear Profile and Pitch Measurements of Gear Measuring Instruments
(306)
Sonko Osawa, National Metrology Institute of Japan, AIST, Japan
Osamu Sato, National Metrology Institute of Japan, AIST, Japan
Yohan Kondo, National Metrology Institute of Japan, AIST, Japan
Masaharu Komori, Department of Mechanical Engineering and Science, Kyoto University, Japan
Toshiyuki Takatsuji, National Metrology Institute of Japan, AIST, Japan
109
TC16 Oral Session 2
Thursday, 08:30 to 09:50 – Fernão de Magalhães Room
TC16 – PRESSURE BALANCES
Co-Chairs: Jay Hendricks, NIST Pressure and Vacuum Group, USA
Maria Nieves Medina, Head of Mass Division, Spanish Metrology Centre (CEM), Spain
08:30
Characteristics of Controlled-Clearance Piston-Cylinders for Pressure Ranges Up to 1 GPa (135)
Hiroaki Kajikawa, National Metrology Institute of Japan, AIST, Japan
Kazunori Ide, National Metrology Institute of Japan, AIST, Japan
Tokihiko Kobata, National Metrology Institute of Japan, AIST, Japan
08:50
Comparative Analysis of the Measurement Uncertainty of the Deformation Coefficient of a Pressure Balance Using
the GUM Approach and Monte Carlo Simulation Methods (539)
Paulo R G Couto, Mechanical Metrology Divison, INMETRO, Brazil
Jailton C Damasceno, Materials Metrology Divison, INMETRO, Brazil
Luiz Henrique Paraguassú de Oliveira, Mechanical Metrology Divison, INMETRO, Brazil
Jackson S. Oliveira, Mechanical Metrology Divison, INMETRO, Brazil
09:10
Comparison Between Gas and Hydraulic Pressure Balances Using a Liquid-Lubricated Pressure Balance (589)
Tokihiko Kobata, National Metrology Institute of Japan, AIST, Japan
09:30
Design of a New Series of Pressure Balance in Liquid Medium (213)
Marcello Caravaggio, SCANDURA & FEM, Italy
Gianfranco Molinar Min Beciet, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Paolo De Maria, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
110
TC19 Oral Session 2
Thursday, 08:30 to 09:50 – Luís Vaz de Camões Room
TC19 – AIR/SOIL
Co-Chairs: Sunao Yamashita, DKK-TOA corporation, Japan
Theodore Laopoulos, Physics Dept. - Electronics Lab, Aristotle University of Thessaloniki, Greece
08:30
An Automated System for Measurement of Shear Waves Velocity in Soil (334)
Argiris Theopoulos, Aristotle University of Thessaloniki, Department of Physics, Electronics Lab, Greece
Anthi Papadopoulou, Aristotle University of Thessaloniki Department of Civil Engineering, Greece
Theodora Tika, Aristotle University of Thessaloniki Department of Civil Engineering, Greece
Theodoros Laopoulos, Aristotle University of Thessaloniki, Department of Physics, Electronics Lab, Greece
08:50
Legal Metrology and the Automotive Air Pollution Control in Brazil (546)
Augusto P. Cunha, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Ronaldo N. Azeredo, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
09:10
Cloud Base Height Estimation Using a Low-Cost Digital Camera (596)
Fernando M. Janeiro, Instituto de Telecomunicações/Universidade de Évora, Portugal
Frank Wagner, Centro de Geofísica de Évora, Universidade de Évora, Portugal
A. M. Silva, Centro de Geofísica de Évora, Universidade de Évora, Portugal
09:30
Solar Powering of a Mobile Telemetry Station for Air Quality Monitoring (653)
Vasco Carvalho, Instituto Superior Técnico, Portugal
111
ROUND TABLE ON TRACEABILITY IN CHEMISTRY, HEALTH, FOOD AND NUTRITION
Co-Chairs: Carlo Ferrero, INRIM, Italy
Isabel Castanheira, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
Philippe Charlet, Laboratoire National de Metrologie et D'Essais (LNE), France
112
TC3 Oral Session 7
TC3 – TORQUE AND MULTI-COMPONENT MEASUREMENTS
Co-Chairs: Dirk Röske, Physikalisch-Technische Bundesanstalt (PTB), Germany
11:00
High Precision Torque Measurement Systems in Dynamic and Static Applications (120)
Sven Kuhn, Hottinger Baldwin Messtechnik GmbH, Germany
11:20
Influence of Cross Forces and Bending Moments on Reference Torque Sensors for Torque Wrench Calibration (330)
Brüge Andreas, Physikalisch-Technische Bundesanstalt (PTB), Germany
Röske Dirk, Physikalisch-Technische Bundesanstalt (PTB), Germany
Mauersberger Dietmar, Physikalisch-Technische Bundesanstalt (PTB), Germany
Adolf Klaus, Physikalisch-Technische Bundesanstalt (PTB), Germany
11:40
Evaluation of Static and Dynamic Parassitic Components on the INRIM 1 MN Primary Force Standard Machine by
Means the 500 kN Six-Component Dynamometer (134)
Carlo Marinari, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
12:00
Evaluation of Multi-Component Force Transducers Having Column Type Sensing Element (157)
Dirk Roeske, Physikalisch-Technische Bundesanstalt (PTB), Germany
Dae-Im Kang, KRISS, Korea
113
TC12 Oral Session 3
TC12 – APPLICATIONS
Co-Chairs: Janko Drnovsek, University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
Tohru Iuchi, Toyo University, Dept. of Mechanical Engineering, Japan
11:00
A Novel Ultrasonic Thermometry for Monitoring Temperature Profiles in Materials (627)
Ikuo Ihara, Nagaoka University of Technology, Japan
Manabu Takahashi, Nagaoka University of Technology, Japan
11:20
Nondestructive Evaluation of Plexiglas Materials Using Lock-in and Pulse Phase Infrared Thermography (220)
Roberto Montanini, University of Messina, Italy
Salvina Aliquò, University of Messina, Italy
11:40
Flat Surface Temperature Probe Influence on Temperature Measurement (406)
Gaber Beges, Univ. of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
Janko Drnovšek, Univ. of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
12:00
Sensors Characterization and Control of Measurement Systems Based on Thermoresistive Sensors Kept at Constant
Temperature (498)
M. A. Moreira, Federal University of Bahia, Brazil
Amauri Oliveira, Federal University of Bahia, Brazil
C. R. T. Dórea, Federal University of Bahia, Brazil
P. R. Barros, Universidade Federal de Campina Grande, Brazil
José Sérgio da Rocha Neto, Federal University of Campina Grande, Brazil
114
TC13 Oral Session 2
TC13 – RADIATION MEASUREMENTS
Co-Chairs: Vesna Sapsic Jokic, Faculty of Technical Sciences, Chair for instrumentation and Electrical Measurements, University of
Novi Sad, Serbia
11:00
Radiation Isodose Surface Distortion as a Source of Dose or Exposure Rate Measurement Uncertainty: Example in
Brachytherapy Seeds (69)
José Manzoli, IPEN-CNEN/SP, Brazil
Jorge Pirolla, Universidade São Judas Tadeu, Brazil
Eduardo Moura, IPEN-CNEN/SP, Brazil
Carlos Zeituni, Nuclear and Energetic Research Institute and Universidade Presbiteriana Mackenzie, Brazil
João Moura, Nuclear and Energetic Research Institute, IPEN, Brazil
Maria Elisa Chuery Martins Rostelatto, Nuclear and Energetic Research Institute, IPEN, São Paulo, Brazil
11:20
Estimation of Patient Effective Dose from 131i Using Monte Carlo Calculation (410)
Vesna Spasic Jokic, Faculty of Technical Sciences, Serbia
Milan Orlic, VINCA Institute og nuclear Sciences, Serbia
11:40
Traceability to Absorbed-Dose-to-Water Primary Standards in Dosimetry of Brachytherapy Sources Used for
Radiotherapic (553)
Maurizio Bovi, Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (ENEA-INMRI), Italy
Maria Pia Toni, Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (ENEA-INMRI), Italy
Isabelle Aubineau-Lanièce, CEA, LIST, LNE-LNHB, France
Jean-Marc Bordy, CEA, LIST, LNE-LNHB, France
João Cardoso, Instituto Tecnológico e Nuclear (ITN), Portugal
Bruno Chauvenet, CEA, LIST, LNE-LNHB, France
Frantisek Gabris, BEV- Bundesamt für Eich- und Vermessungswesen, Austria
Jan-Erik Grindborg, Swedish Radiation Safety Authority (SSM), Sweden
Antonio Stefano Guerra, Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (ENEA-INMRI), Italy
Antti Kosunen, Radiation and Nuclear Safety Authority (STUK), Finland
Carlos Oliveira, Instituto Tecnológico e Nuclear (ITN), Portugal
Maria Pimpinella, Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (ENEA-INMRI), Italy
Thorsten Sander, National Physical Laboratory, United Kingdom
Hans-Joachim Selbach, Physikalisch-Technische Bundesanstalt (PTB), Germany
Vladimír Sochor, Czech Metrology Institute, Czech Republic
Jaroslav Šolc, Czech Metrology Institute, Czech Republic
Jacco de Pooter, Van Swinden Laboratorium B. V. (VSL), The Netherlands
Eduard van Dijk, Van Swinden Laboratorium B. V. (VSL), The Netherlands
12:00
Portable X–Ray CT Mini System Based on Monolithitic Semi-Insulating GaAs Detectors Using Perspective Imaging
Reconstruction Techniques (67)
Jiri Přibil, Institute of Measurement Science, SAS, Bratislava, Slovakia
B. Zaťko, Institute of Electrical Engineering, Slovak Academy of Sciences, Slovakia
Ivan Frollo, Institute of Measurement Science, SAS, Bratislava, Slovakia
F. Dubecký, Institute of Electrical Engineering, Slovak Academy of Sciences, Slovakia
Pawel Gryboś, Department of Measurement and Science, AGH University of Science and Technology, Poland
115
TC14
TC14 – MEETING
on
Measurement of Geometrical Quantities
TC14
116
TC16 Oral Session 3
TC16 – VACUUM AND LOW PRESSURE
Co-Chairs: Jorge C. Torres-Guzmán, Centro Nacional de Metrología (CENAM), Mexico
Sam-Yong Woo, Division of Physical Metrology, Korea Research Institute of Standards and Science, Korea
11:00
Effects of Baffle Size on Pressure Distribution in Vacuum Chamber During Continuous Gas Flow (232)
Wakil Khan, Vacuum Technology Centre, KRISS/University of Science and Technology (UST), Korea
Y. H. Shin, Vacuum Technology Centre, KRISS, Korea
Seung Soo Hong, Vacuum Technology Centre, KRISS, Korea
11:20
Volume Ratio Determination in Static Expansion Systems by Means of Two Pressure Balances (280)
David Herranz, Spanish Metrology Centre (CEM), Spain
11:40
A Method of Traceability for a FPG8601 Force Balanced Piston Gauge to Define Pressures in the Range from 1 Pa to
15 kPa in Gauge and Absolute Measurement Modes (298)
Rob Haines, DH Instruments, A Fluke Company, United States of America
Michael Bair, DH Instruments, A Fluke Company, United States of America
12:00
NIST Experience with Non-Rotating Force-Balanced Piston Guages for Low Pressure Metrology (549)
Jay H. Hendricks, National Institute of Standards and Technology (NIST), United States of America
Douglas A. Olson, National Institute of Standards and Technology (NIST), United States of America
117
TC1
TC1 – MEETING
on
Education and Training in Measurement and Instrumentation
TC1
118
TC3 Oral Session 8
TC3 – MASS II
Co-Chairs: José Ángel Robles, Director de la División Científica y de RRII, Director of Scientific and IIRR Division, Centro Español de
Metrología (CEM), Spain
Richard Davis, Head, Mass Section, Bureau International des Poids et Mesures, Sèvres, France
13:40
A New Weighing Method for Checkweighers by Using Signal Processing (246)
Kengo Fukuda, Oyo Measurement Co., Ltd., Japan
Koji Yoshida, Okayama University of Science, Japan
Tetsuya Kinugasa, Okayama University of Science, Japan
Shinsaku Fujimoto, Okayama University of Science, Japan
Morihito Kamon, Department of Automatic Machinery R&D, Yamato Scale Co., Ltd., Japan
Yoichiro Kagawa, Department of Automatic Machinery R&D, Yamato Scale Co., Ltd., Japan
Toshiro Ono, professor emeritus at Osaka Prefecture University, Japan
14:00
Investigations of New Silicon Load Cells with Thin-Film Strain Gauges (374)
Sascha Mäuselein, Physikalisch-Technische Bundesanstalt (PTB), Germany
Oliver Mack, Physikalisch-Technische Bundesanstalt (PTB), Germany
Roman Schwartz, Physikalisch-Technische Bundesanstalt (PTB), Germany
14:20
Recommended for the Revision of Test Procedures for Load Cells in Legal Metrology (427)
Oliver Mack, Physikalisch-Technische Bundesanstalt (PTB), Germany
Sascha Mäuselein, Physikalisch-Technische Bundesanstalt (PTB), Germany
14:40
Mass and Density Determination of OIML E1 Weight Set in Czech Metrology Institute (508)
Jaroslav Zůda, Czech Metrology Institute, Czech Republic
15:00
Sub-Milligram Weight Subdivision and Application in Force Calibration of Nanoindenter (93)
Chin-Fen Tuan, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Fu-Lung Pan, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Yi-Ching Lin, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Sheau-shi Pan, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
Chung-Lin Wu, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan
119
TC9 Oral Session 1
TC9 – FLOW MEASUREMENT - LIQUIDS ETC.
Co-Chairs: Ernst von Lavante, University of Duisburg-Essen, Germany
Craig Coull, METCO Services Ltd, Aberdeen, Scotland, United Kingdom
13:40
Uncertainty Evaluation of Multi-Sensor Flow Measurement in a Sewer System Using Monte Carlo Method (75)
Álvaro Silva Ribeiro, Laboratório Nacional de Engenharia Civil, Portugal
Maria do Céu Almeida, Laboratório Nacional de Engenharia Civil, Portugal
João Palma, Laboratório Nacional de Engenharia Civil, Portugal
14:00
Determination of Vortex Convection Velocity with Application of Flow Visualization and Image Processing (4)
Grzegorz L. Pankanin, Institute of Electronic Systems, Warsaw University of Technology, Poland
Artur Kulinczak, Institute of Electronic Systems, Warsaw University of Technology, Poland
14:20
Radiofrequency Technological Measurements Under Pipeline Transportation of Liquefied Petrolem Gas (42)
Alexander Sovlukov, Institute of Control Sciences, Russia
Victor Tereshin, Technosensor Co., Russia
14:40
EURAMET Regional Key Comparison - Volume Comparison at 20 l (415)
Elsa Batista, Instituto Português da Qualidade, Portugal
Nelson Almeida, Instituto Português da Qualidade, Portugal
Peter Lau, Technical Research Institute of Sweden, Sweden
15:00
Applying Digital Control of the Discharge in Hydraulic Models (608)
Roman Klasinc, Graz Univ. of Technology, Institute of Hydraulic Eng. and Water Resources Management, Austria
Andrej Predin, Faculty of Mechanical Engineering, University of Maribor, Slovenia
Mitja Kastrevc, Faculty of Mechanical Engineering, University of Maribor, Slovenia
15:20
Assessment of the Applicability of the Weight Vector Theory for Coriolis Flowmeters (48)
Stephanie Enz, Technical University of Denmark, Denmark
120
TC13 Oral Session 3
TC13 – BIOMEDICAL MEASUREMENTS
Co-Chairs: Gregor Geršak, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Pablo Luna-Lozano, Castelldefels School of Technology (EPSC), Technical University of Catalonia (UPC), Spain
13:40
Concept of Personalised Biomedical Instrumentation; Case Study - Blood Pressure (439)
Gregor Geršak, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Irena Nančovska Šerbec, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Janko Drnovšek, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
14:00
ProCardio 8 – the 8th Generation of the High Resolution ECG Mapping System (574)
J. Muzik, CTU in Prague, Faculty of Biomedical Engineering, Czech Republic
M. Tysler, Institute of Measurement Science, Slovak Academy of Sciences, Bratislava, Slovakia
P. Kneppo, CTU in Prague, Faculty of Biomedical Engineering, Czech Republic
V. Rosik, Institute of Measurement Science, Slovak Academy of Sciences, Bratislava, Slovakia
S. Karas, Institute of Measurement Science, Slovak Academy of Sciences, Bratislava, Slovakia
E. Heblakova, Institute of Measurement Science, Slovak Academy of Sciences, Slovakia
14:20
Interference Reduction in ECG Recordings by Using a Dual Ground Electrode (214)
Delia Díaz, Departament d’Enginyeria Electrònica,Universitat Politècnica de Catalunya (UPC), Spain
Óscar Casas, Departament d’Enginyeria Electrònica,Universitat Politècnica de Catalunya (UPC), Spain
Ramon Pallàs-Areny, Departament d’Enginyeria Electrònica,Universitat Politècnica de Catalunya (UPC), Spain
14:40
Heart Rate Detection from Impedance Plethysmography Based on Concealed Capacitive Electrodes (270)
Pablo Luna-Lozano, Technical University of Catalonia, Spain
15:00
Electrocardiogram by Mobile Phone: A Compression Method for SMS (543)
Cleonilson Protásio de Souza, CEFET-MA, Brazil
Tiago Pontes Pereira, CEFET-MA, Brazil
15:20
A Multichannel Wireless EMG Measurement System Based on Intrabody Communication (446)
Zeljka Lucev, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
Igor Krois, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
Mario Cifrek, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
121
TC14 Oral Session 3
TC14 – CALIBRATION, TRACEABILITY AND MEASUREMENTS UNCERTAINTY
Co-Chairs: Jörg Seewig, Lehrstuhl für Messtechnik & Sensorik, Technische Universität Kaiserslautern, Germany
13:40
On Traceability of Long Distances (100)
Jorma Jokela, Finnish Geodetic Institute, Finland
Pasi Häkli, Finnish Geodetic Institute, Finland
Joel Ahola, Finnish Geodetic Institute, Finland
Arunas Buga, Vilnius Gediminas Technical University, Institute of Geodesy, Lithuania
Raimundas Putrimas, Vilnius Gediminas Technical University, Institute of Geodesy, Lithuania
14:00
Assesment of Measurement Uncertainty Caused in the Preparation of Measurements using Computed Tomography
(145)
Philipp Krämer, Quality Management and Manufacturing Metrology, University Erlangen-Nuremberg, Germany
14:20
Angle Calibration of Robotic Total Stations and Laser Trackers (156)
David Martin, European Synchrotron Radiation Facility, France
Derek G. Chetwynd, School of Engineering, University of Warwick, United Kingdom
14:40
3D Measurement of Inner Shape of a Cavitiy (322)
Kazuhiro Enami, High Energy Accelerator Research Organization, Japan
Tatuya Kume, High Energy Accelerator Research Organization, Japan
Yasuo Higashi, High Energy Accelerator Research Organization, Japan
Kenji Ueno, High Energy Accelerator Research Organization, Japan
15:00
Extrinsic Parameters Calibration of a Structured Light System Via Planar Homography Based on a Reference Solid
(430)
Enrico Marcuzzi, Cisas "G. Colombo", Center of Studies and Activities for Space, University of Padova, Italy
Giorgio Parzianello, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
Massimiliano Tordi, Space Light SRL, Rovigo, Italy
Massimo Bartolozzi, Space Light SRL, Rovigo, Italy
Massimo Lunardelli, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
Antonio Selmo, Dep of Information Engineering, Un. of Padova, Italy
Luca Baglivo, Cisas "G. Colombo", Center of Studies and Activities for Space, University of Padova, Italy
Stefano Debei, Cisas "G. Colombo", Center of Studies and Activities for Space, University of Padova, Italy
Mariolino De Cecco, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
15:20
Multi-Stereo Compatibility Analysis for 3D Shape Estimation (460)
Mariolino De Cecco, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
Marco Pertile, Dept of Mechanical Engineering, University of Padova, Italy
Luca Baglivo, Dept of Mechanical Engineering, University of Padova, Italy
Giorgio Parzianello, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
Massimo Lunardelli, Dep. Of Mechanical and Structural Engineering, Un. of Trento, Italy
Francesco Setti, Department of Mechanical and Structural Engineering, University of Trento, Italy
Antonio Selmo, Dept of Information Engineering, University of Padova, Italy
122
TC24 Oral Session 1
TC24 – TRACEABLE CHEMICAL MEASUREMENTS
Co-Chairs: Philippe Charlet, Laboratoire National de Metrologie et D'Essais (LNE), France
Paola Fisicaro, Biomedical and Inorganic Chemistry Department, LNE, France
13:40
Integrate Approach to the Calibration of Nitrogen Oxides Analysers and to the Evaluation of their Measurement
Uncertainty (161)
Elena Amico di Meane, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Davide Baroncini, Bi-Lab S.r.l., Italy
Stefano Crispu, Bi-Lab S.r.l., Italy
Gian Carlo Piras, Bi-Lab S.r.l., Italy
Michela Sega, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
14:00
A Dynamic Trace VOC Generator Useful for Global Climate Change Study (262)
Guido Sassi, Istituto Nazionale di Ricerca Metrologica (INRIM) / Politecnico di Torino, Italy
Alessia Demichelis, Istituto Nazionale di Ricerca Metrologica (INRIM) / Politecnico di Torino, Italy
MariaPaola Sassi, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
14:20
Portuguese pH Interlaboratory Comparison (429)
M. João Nunes, Instituto Português da Qualidade, Portugal
M.J. Guiomar Lito, Faculdade de Farmácia da Universidade de Lisboa, Portugal
M. Filomena Camões, Faculdade de Ciências da Universidade de Lisboa, Portugal
14:40
Ethanol Primary Gas Standards Preparation (435)
Gonçalo Baptista, Instituto Português da Qualidade, Portugal
15:00
Implementation, Validation and Application of a Method of Evaluation of Urinary 1-Hydroxypyrene as a Indicator of
Human Exposure to Polycyclic Aromatic Hydrocarbons in Rio De Janeiro State, Brazil (448)
Eliane Cristina Pires do Rego, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Annibal Duarte Pereira Netto, Dep. of Analytical Chemistry, Institute of Chemistry, Federal Fluminense Univ., Brazil
15:20
Development of a Flow-Through Cell for Accurate Measurements of Low Electrolytic Conductivity (450)
Chiara Boveri, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Francesca Durbiano, Istituto Nazionale di Ricerca Metrologica, Italy
Danilo Serazio, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
123
Poster Session 3
POSTER SESSION 3 (TC4, TC12, TC15)
A Simple Fault Diagnosis Method for Analog Parts of Electronic Embedded Systems (19)
Why Reactive Compensators Do Not Improve the Efficiency Correctly in Unbalanced Circuits (121)
Vicente León-Martínez, Universidad Politécnica de Valencia, Spain
Joaquím Montañana-Romeu, Universidad Politécnica de Valencia, Spain
José Roger-Folch, Universidad Politécnica de Valencia, Spain
Antonio Cazarola-Navarro, Universidad Politécnica de Valencia, Spain
Evaluation of the Long Term Stability of Inductors Using Standard Error of Estimate (141)
Gelson M. Rocha, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Luiz Macoto Ogino, Capacitance and Inductance Laboratory - INMETRO, Brazil
A Precision Calibration Set-Up for AC Magnetic Flux Density Measurement in the Range of 1 Hz to 20 kHz (197)
Po Gyu Park, KRISS, Korea
Young Gyun Kim, KRISS, Korea
Wan-Seop Kim, KRISS, Korea
V. N. Kalabin, D. I. Mendeleyev Institute for Metrology, Russia
Vladlen Ya. Shifirn, D. I. Mendeleyev Institute for Metrology, Russia
DSP Based Power Analyzing System for Onsite Measurements (237)
W. M. S. Wijesinghe, KRISS, Korea
Young Tae Park, KRISS, Korea
On the Design of Low-Power Signal Conditioners for Resistive Sensors (268)
Ramon Casanella, Universitat Politecnica de Catalunya, Spain
Fast and Accurate Measurement of the RMS Value of a Noncoherent Sampled Sine Wave (284)
Daniel Belega, Faculty of Electronics and Telecommunications, Politehnica University of Timisoara, Romania
Dominique Dallet, University of Bordeaux - ENSEIRB, IMS Laboratory, France
Increase of Strain Gage Output Voltage Signals Accuracy Using Virtual Instrument with Harmonic Excitation (290)
Dalibor Kuhinek, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Croatia
Igor Zoric, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Croatia
Josip Butorac, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia
A Simple, Virtual Phase Shift Meter (327)
Adam W. Cichy, Silesian Univ. of Technology, Institute of Measurement Science, Electronics and Control, Poland
Four Terminal-Pair Coaxial Standards of Capacitance (377)
Jaroslav Bohacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Radek Sedlacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Jan Kucera, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Low Noise DC Power Supplies (379)
124
Nonlinearity Testing of Equipment Used in Temperature Measurements (399)
Tadej Podgornik, University of Ljubljana, Faculty of Electrical Engineering, Slovenia
Error Modeling of Static Energy Meters (405)
Carlo Carobbi, Dep. of Electronics and Telecommunications, Università di Firenze, Italy
Guido Pellicci, Firenze Tecnologia, Italy
Simone Vieri, Dep. of Electronics and Telecommunications, Università di Firenze, Italy
Comparison of the Precision of Gain and Offset Estimations Obtained with the Histogram Test of ADCs (473)
Preliminary Evaluation of Quantum Hall Effect Devices by Photoreflectance Spectroscopy (482)
L. Zamora-Peredo, Universidad Politécnica de San Luis Potosí, Mexico
M. Hernández-Sustaita, Universidad Politécnica de San Luis Potosí, Mexico
Ivan C. Hernández, Lasertel Inc., United States of America
V. H. Méndez-García, Instituto de Investigación en Comunicación Óptica, UASLP, Mexico
M. López-López, Departmento de Física, Centro de Investigaciones y de Estudios Avanzados - IPN, Mexico
The Use of Traditional Spectrum Analyzers to Measure the Electromagnetic Pollution Generated by WiMAX Devices
(502)
Giovanni Betta, DAEIMI - University of Cassino, Italy
Domenico Capriglione, DAEIMI - University of Cassino, Italy
Gianfranco Miele, DAEIMI - University of Cassino, Italy
Luca Rossi, DAEIMI - University of Cassino, Italy
Inductive Current Sensor Based on Nanocrystalline Alloys (503)
Euler C. T. Macedo, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil
José G. A. Lira, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil
Edson G. Costa, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil
Raimundo C. S. Freire, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil
Benedito A. Luciano, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil
Marcelo J. A. Maia, Companhia Hidroeletrica do São Francisco (CHESF), Brazil
Microsystems for Electrical AC Voltage Metrology (531)
A. Bounouh, LNE Laboratoire National de Métrologie et d'Essais, France
F. Blard, LNE Laboratoire National de Métrologie et d'Essais, France
H. Camon, LAAS/CNRS - Université de Toulouse, France
D. Bélières, LNE Laboratoire National de Métrologie et d'Essais, France
F. Ziadé, LNE Laboratoire National de Métrologie et d'Essais, France
Real Time Distribution Using Radio Time Tones of Commercial Broadcasting System (555)
Youngbeom Kim, KRISS, Korea
Youngkyu Lee, KRISS, Korea
Ant-Based Search Strategy for Industrial Multiple-Fault Diagnostics (558)
Carlo Manna, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy
Giuseppe Montenero, CERN European Organization for Nuclear Research, Geneva, Switzerland
125
Automatic Calibration System for Digital Instruments Without Built-In Communication Interface (559)
G. Andria, Polytechnic of Bari, Italy
Giuseppe Cavone, Polytechnic of Bari, Italy
L. Fabbiano, Polytechnic of Bari, Italy
M. Savino, Polytechnic of Bari, Italy
A Minimally-Invasive System for Free-Living Activity Monitoring in Home Care (584)
Fabrizio Clemente, Istituto di Ingegneria Biomedica - CNR, Italy
Carlo Manna, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy
Thermoelastic Signal Processing Using an FFT Lock-In Based Algorithm on Extended Sampled Data (588)
L. D’Acquisto, Dipartimento di Meccanica, Università degli Studi di Palermo, Italy
A. Normanno, Dipartimento di Meccanica, Università degli Studi di Palermo, Italy
G. Pitarresi, Dipartimento di Meccanica - Università di Palermo, Italy
A. M. Siddiolo, Sintesi SCpA, Italy
Flexibility Experimental Test of the Software Framework for Magnetic Measurements at CERN (612)
Marco Buzio, Dept. of Technology, Group of Magnets Superconductors Cryostats, CERN, Switzerland
Vitaliano Inglese, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II/CERN, Switzerland
Analysis of Rogowski Coil Behavior Under Non Ideal Measurement Conditions (650)
G. Crotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
D. Giordano, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
A. Morando, Dipartimento di Ingegneria Elettrica Politecnico di Torino, Italy
DWT Analysis of Selected Transient and Notching Disturbances (660)
Mariusz Szweda, Gdynia Maritime University, Department of Ship Electrical Power, Poland
FEM Analysis of Rogowski Coils Coupled with Bar Conductors (676)
Mirko Marracci, University of Pisa, Italy
Bernardo Tellini, University of Pisa, Italy
Carmine Zappacosta, University of Pisa, Italy
On the Model of MV Power Line Communication System in the Case of Line to Line Transmission (687)
Antonio Cataliotti, Dep. of Electrical, Electronic and Telecommunication Engineering, Univ. di Palermo, Italy
G. Tinè, Institute on Intelligent Systems for the Automation/Research National Council, Italy
Calibrator of Alternative Voltage Based on the Method of Reproduction of Value of Direct Voltage (689)
Sergiej Taranow, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine
Yurij Tesyk, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine
Oleh Karasinskij, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine
Stanislava Pronselev, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine
DSL Interoperability Testing Laboratory (692)
Doris Bao, Department of Engineering, University of Sannio, Italy
Daniele Domenico Napolitano, TLC Testing Sannio Lab, Italy
An Inherently Linear Transducer Using Thermal Sigma-Delta Modulator (2)
Valter C. Rosa, Federal University of Bahia, Brazil
Amauri Oliveira, Federal University of Bahia, Brazil
Ligia S. Palma, Federal University of Bahia, Brazil
Luiz Fernando G. T. Amaral, Federal University of Bahia, Brazil
126
Measurement of the Size of Source for Pyrometers Directly Indicating in Temperature (40)
Maria Jose Martin, Centro Español de Metrología, Spain
Manuel Zarco, Centro Español de Metrología, Spain
Dolores del Campo, Centro Español de Metrología, Spain
Study of the Influence of Convective Effects in Incident Radiative Heat Flux Density Measurement Uncertainty (101)
Luís Lages Martins, Laboratório Nacional de Engenharia Civil, Portugal
Álvaro Silva Ribeiro, Laboratório Nacional de Engenharia Civil, Portugal
Carlos Pina dos Santos, Laboratório Nacional de Engenharia Civil, Portugal
Calculated Uncertainty of the Thermal Diffusivity Measurement Based on Flash Laser Method (126)
Fabrício Lima Migliorini, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Egonn Hendrico Carvalho Silva, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Pablo Andrade Grossi, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Ricardo Alberto Neto Ferreira, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Denise das Mercês Camarano, National Commission of Nuclear Energy/Nuclear Tech. Development Center, Brazil
Influence of Radiation Diffraction Upon Metrological Parameters of the IR Line Scanner (393)
Leszek Rozanski, Poznan University of Technology, Poland
Stanislaw Poloszyk, Poznan University of Technology, Poland
Low Temperature Calibration Facilities at KRISS (547)
Inseok Yang, KRISS, Korea
Yong-Gyoo Kim, KRISS, Korea
Chang Ho Song, KRISS, Korea
Kee Hoon Kang, KRISS, Korea
Kee Sool Gam, KRISS, Korea
New Primary Low-Range Dew-Point Generator at LPM (554)
Davor Zvizdic, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Martti Heinonen, Centre for Metrology and Accreditation (MIKES), Finland
Tomislav Veliki, Laboratory for Process Measurement (LPM), Croatia
Daniel Sestan, Laboratory for Process Measurement (LPM), Croatia
Advanced Thermal Measurements of Modern Manufacturing Systems (579)
Marcel Sabin Popa, Technical University of Cluj Napoca, Romania
An Evaluation of a Simple Dynamical Model for Impacts Between Rigid Objects (490)
Erik Molino Minero Re, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain
Mariano López, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain
Alfonso Carlosena, Universidad Pública de Navarra, Spain
Xavier Roset, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain
127
TC4 Oral Session 11
TC4 – POWER QUALITY ASSESSMENT
Co-Chairs: Janusz Mindykowski, Gdynia Maritime University, Poland
16:20
Evaluation of an Asynchronous Sampling Correction Technique Suitable for Power Quality Measurements (73)
Paul Clarkson, National Physical Laboratory, United Kingdom
Paul Wright, National Physical Laboratory, United Kingdom
16:40
Detection of Short Transients and Interruptions Using the Hilbert Transform (274)
Maurizio Caciotta, Roma Tre University, Italy
Sabino Giarnetti, Roma Tre University, Italy
Fabio Leccese, "Roma Tre" University, Italy
Zbigniew Leonowicz, Wrocław University of Technology, Poland
17:00
Single-Phase Power Quality Analyzer Based on a New Detection and Classification Algorithm (426)
A. Cruz Serra, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal
17:20
DSP-Based Instrument for Power Quality Monitoring on Ships (592)
Tomasz Tarasiuk, Gdynia Maritime University, Poland
17:40
Characterization Issue of Power Quality Instruments (604)
Daniele Gallo, Dipartimento di Ingegneria dell’Informazione, Seconda Università di Napoli, Italy
Mario Luiso, Dipartimento di Ingegneria dell’Informazione, Seconda Università di Napoli, Italy
18:00
Current Harmonics Generated by Lamps: A Comparison in Different Conditions of Supply Voltage (601)
Claudio Cicala, Department of Electrical Engineering - “Sapienza” Università di Roma, Italy
Luca Podestà, Department of Electrical Engineering - “Sapienza” Università di Roma, Italy
128
TC7
TC7 – MEETING
on
Measurement Science
TC7
129
TC9 Oral Session 2
TC9 – FLOW MEASUREMENT - GASES ETC.
Co-Chairs: Jian Wu, National Metrology Centre of Agency for Science, Technology and Research (A*STAR), Singapore
16:20
Laser Doppler Velocity Profile Sensor: Technical Advances for the Optical Flow Rate Measurement of Natural Gas
(186)
Andreas Voigt, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany
Lars Büttner, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany
Jürgen Czarske, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany
Harald Müller, Physikalisch-Technische Bundesanstalt (PTB), Germany
16:40
Numerical and Experimental Study of Effects of Upstream Disturbances on Accuracy of Vortex-Shedding Flow Meter
(194)
Pierre Cambier, ICAM Ecole d’ingenieurs, France
S. Vandermarlière, ICAM Ecole d’ingenieurs, France
Ernst von Lavante, University Duisburg-Essen, Germany
U. Banaszak, University Duisburg-Essen, Germany
H. Krisch, Krohne Messtechnik GmbH, Germany
Sylvain Tournillon, Krohne Messtechnik GmbH, Germany
17:00
Realisation of a Primary Air Velocity Standrad Using Laser Doppler Anemometer and Precision Wind Tunnel (413)
Jian Wu, National Metrology Centre of Agency for Science, Technology and Research (A*STAR), Singapore
17:20
Aerodynamic Loads Measurement of a Sounding Rocket Vehicle Tested in Wind Tunnel (478)
Maria Luísa Reis, Institute of Aeronautics and Space, Brazil
João Batista Falcão, Institute of Aeronautics and Space, Brazil
Giuliano Paulino, São Paulo State University, Brazil
Cláudio Truyts, Institute of Aeronautics and Space, Brazil
17:40
Numerical Test Rig for Turbine Gas Meter (234)
Toralf Hoch, RMG Messtechnik GmbH, Germany
Ernst von Lavante, University Duisburg-Essen, Germany
18:00
Advanced Phasor Control for a Coriolis Mass Flow Meter (CMFM) (402)
H. Röck, Christian-Albrechts-University of Kiel, Germany
Felix Koschmieder, Christian-Albrechts-University of Kiel, Germany
130
TC12 Oral Session 4
TC12 – CALIBRATIONS AND INTERCOMPARISONS
Co-Chairs: Eduarda Filipe, Instituto Português da Qualidade, Portugal
Jovan Bojkowski, University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality,
Slovenia
16:20
Noise and Interference in Thermometry Resistance Bridges (368)
16:40
Practical Limits of Measurement Uncertainties in Calibration of Standard Platinum Resistance Thermometers by
Comparison (367)
Jovan Bojkovski, Univ. of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
Valentin Batagelj, Univ. of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
Vincencij Žužek, Univ. of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia
17:00
Interlaboratory Comparison of Digital Thermometer Between the Temperature Range from -40 °C to 420 °C (567)
Aliye Kartal Dogan, TUBITAK UME (National Metrology Institute), Turkey
Ali Uytun, TUBITAK UME (National Metrology Institute), Turkey
Murat Kalemci, TUBITAK UME (National Metrology Institute), Turkey
Kursat Ozdemir, TURKAK (Turkish Accreditation Agency), Turkey
17:20
Development of an Automatic Calibration System for Clinical Electrical Thermometers (87)
Le Chen, College of Mechatronics Engineering, China Jiliang University, China
Jian Sun, College of Mechatronics Engineering, China Jiliang University, China
Yaqiong Fu, College of Mechatronics Engineering, China Jiliang University, China
Hongwei Xu, College of Mechatronics Engineering, China Jiliang University, China
17:40
Comparison of Thermocouple Temperature Scales Realized by Fixed-Point and Radiation Methods (181)
Yong-Gyoo Kim, KRISS, Korea
Inseok Yang, KRISS, Korea
Yong Shim Yoo, KRISS, Korea
18:00
Uncertainties in the Whole Range of the Calibration of a Thermocouple (666)
Peter Benkó, STU Faculty of Mechanical Engineering, Slovakia
Rudolf Palenčár, STU Faculty of Mechanical Engineering, Slovakia
131
TC13 Oral Session 4
TC13 – BIOMEASUREMENTS
Co-Chairs: Nikolaus Bezruczko, Measurement and Evaluation Consulting, Chicago, United States of America
16:20
Fundamental Measurement for Functional Caregiving in Rehabilitation Medicine (91)
Nikolaus Bezruczko, Measurement and Evaluation Consulting, Chicago, United States of America
Shu-Pi Chen, Saint Xavier University, United States of America
Constance Hill, Children's Memorial Hospital, United States of America
Joyce Chesniak, Children's Memorial Hospital, United States of America
16:40
New Method for Locomotor Activity Measures in Instrumented Animals with Implant Based on Inductive Coupling
(296)
Marcus Tadeu Pinheiro Silva, Federal Center for Technological Education - MG, Brazil
Flávio Henrique Vasconcelos, Federal University of Minas Gerais, Brazil
Guilherme Augusto Silva Pereira, Federal University of Minas Gerais, Brazil
17:00
Analysis and Design of Inductive Biosensors for Magnetic Immuno Assay (481)
Bruno Andò, DIEES- University of Catania, Italy
Salvatore Baglio, DIEES- University of Catania, Italy
Angela Beninato, DIEES- University of Catania, Italy
Giorgio Fallica, STMicroelectronics, Italy
Vincenzo Marletta, DIEES- University of Catania, Italy
Nicola Pitrone, DIEES- University of Catania, Italy
17:20
Correlation of Near and Far Infrared Vein Recognition for Unified Processing and Simulation (437)
Septimiu Crisan, Dep. of Electrical Measurement, Fac. of Electrical Engineering, Tech. Univ. of Cluj-Napoca, Romania
Ioan Gavril Tarnovan, Technical University of Cluj-Napoca, Romania
Bogdan Tebrean, Technical University of Cluj-Napoca, Romania
Titus Eduard Crisan, Technical University of Cluj-Napoca, Romania
17:40
Electrochemical Immunoassay for Cardiac Markers with Magnetic Particles as a Solid Phase and Silver Nanoparticles
as an Electroactive Bio-Label (492)
Mateusz Szymanski, Cranfield University / National Physical Laboratory, United Kingdom
Robert Porter, National Physical Laboratory, United Kingdom
18:00
3-Dimensional Spectroscopic-Tomography of Biological Membrane by the Imaging-Type 2-D Fourier Spectroscopy
(72)
Takashi Takuma, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Shinji Yabushita, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Takeshi Kawajiri, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Kana Yanogawa, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Takaki Harada, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Kazuya Yamamoto, Faculty of Engineering, Kagawa University, Takamatsu, Japan
Ichirou Ishimaru, Faculty of Engineering, Kagawa University, Takamatsu, Japan
132
TC14 Oral Session 4
TC14 – OPTICAL METROLOGY IN HIGH-PRECISION MEASUREMENTS
Co-Chairs: Ryoshu Furutani, Department of Precision Engineering, Faculty of Engineering, Tokyo Denki University, Japan
Jerzy Sladek, Laboratory of Coordinate Metrology, Mechanical Department, Cracow University of Technology, Poland
16:20
Limitations of Precision Length Measurements Based on Interferometers (37)
Gerd Jäger, Ilmenau University of Technology, Germany
16:40
Three Dimensional Profile Measurement of Four-Step Reference Specimens Using the Fringe Scanning Fourier
Transform Method (102)
Chu-Shik Kang, KRISS, Korea
Jae Wan Kim, KRISS, Korea
Jong-Ahn Kim, KRISS, Korea
Tae Bong Eom, KRISS, Korea
17:00
New Demosaicing Algorithm Especially for Measurement of Geometries by Image Processing (113)
Holger Weißensee, Ilmenau University of Technology, Germany
17:20
Nano-Dimensional Measurement Using Optically Trapped Probe Enhanced by Interferometric Scale (199)
Masaki Michihata, Osaka University, Japan
Daisuke Nakai, Osaka University, Japan
Terutake Hayashi, Osaka University, Japan
Yasuhiro Takaya, Osaka University, Japan
17:40
Mechatronic Approach in Precision Measurements (352)
Vytautas Giniotis, Vilnius Gediminas Technical University, Lithuania
Ramutis Bansevicius, Kaunas University of Technology, Lithuania
Mindaugas Rybokas, Vilnius Gediminas Technical University, Lithuania
18:00
Absolute Distance Metrology for Long Distances with Dual Frequency Sweeping Interferometry (647)
Alexandre Cabral, Faculty of Science of the University of Lisbon, Portugal
Manuel Abreu, Faculty of Science of the University of Lisbon, Portugal
José M. Rebordão, Faculty of Science of the University of Lisbon, Portugal
133
Poster Session 4
POSTER SESSION 4 (TC5, TC10, TC16, TC20, TC21, TC22, TC23, TC24)
Application of PSI/SCM Microscope for Nanoindentation Tester (329)
Masayuki Fujitsuka, Japan Society for the Promotion of Machine Industry, Japan
Makoto Yamaguchi, Japan Society for the Promotion of Machine Industry, Japan
Shigeru Ueno, Japan Society for the Promotion of Machine Industry, Japan
Genichiro Kamiyama, Lasertec Corporation, Japan
Shigeo Katayama, Fischer Instruments K.K., Japan
Installation and Uncertainty Evaluation of Reference Hardness Standard of Croatia (382)
Željko Alar, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Mladen Franz, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Tamara Aleksandrov, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Sanja Šolić, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
A Simple Mathematical Method Used to Describe the Indenter Tip Area Function (606)
Pedro Bastos Costa, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil
Application of the Scanning Electron Microscope for the Analysis of the Reference Hardness Block Surface Quality
(644)
Suzana Jakovljević, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Sanja Šolić, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Tamara Aleksandrov, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Željko Alar, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
Influence of Reliability on the Tradtional Control Charts: A Reliable Shewhart Control Chart (34)
Stefano De Falco, Research and Technology Transfer Office, School of Science and Tech., Univ. of Naples, Italy
Nello Polese, Dept. of Electrical Engineering, University of Naples Federico II, Italy
Traceability of Refrigerant Leak Tightness (43)
Isabelle Morgado, Laboratoire National de Métrologie et d'Essais, France
Pierre Otal, Laboratoire National de Métrologie et d'Essais, France
Jean-Claude Legras, Laboratoire National de Métrologie et d’Essais, France
Denis Clodic, Centre d'Energétique et des Procédés, Ecole des Mines de Paris, France
Car’s Ignition System Diagnostics Using Continuous Wavelet Transform (54)
Petr Ježdík, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Jirí Novák, CTU in Prague, Faculty of Electrical Engineering, Czech Republic
Fault Diagnosis of Fully Differential Circuits in Electronic Embedded Systems (313)
Wojciech Toczek, Gdańsk University of Technology, Poland
Quality Assessment of Metal Oxide Varistors by Noise Spectroscopy (351)
Lech Hasse, Gdańsk University of Technology, Poland
Contactless Diagnostics of Thin Film Layers (371)
134
Measurement of Surface Displacement Excited by EMAT Transducer (411)
Petr Fidler, Brno University of Technology, Faculty of Electrical Engineering and Communication, Czech Republic
Petr Beneš, Brno University of Technology, Faculty of Electrical Engineering and Communication, Czech Republic
Novel and Low-Cost Temperature Compensation Technique for Piezoresistive Pressure Sensors (74)
Ferran Reverter, Universitat Politècnica de Catalunya, Spain
Goran Horak, University of Zagreb, Croatia
Vedran Bilas, University of Zagreb, Croatia
Manel Gasulla, Universitat Politècnica de Catalunya, Spain
Uncertainty of Measurement of Transient Pressure (148)
Zhijie Zhang, North University of China, China
Wei Wang, North University of China, China
Wenlian Wang, North University of China, China
Daihua Wang, North University of China, China
Differential Pressure Comparison from 20 Pa to 3 500 Pa Between CEM-Spain and CENAM-Mexico (416)
Jorge C. Torres-Guzmán, Centro Nacional de Metrología, Mexico
Pablo Olvera, Centro Nacional de Metrología, Mexico
Volume Determination of a Vacuum Vessel by Pressure Rise Method (632)
Janez Setina, Institute of Metals and Technology, Slovenia
Bojan Erjavec, Institute of Metals and Technology, Slovenia
Remote Control of Electrical Appliances Via Power Line 230 V (83)
Milan Adamek, Faculty of Applied Informatics, Tomas Bata Univerzity in Zlin, Czech Republic
Pavel Martinec, Faculty of Applied Informatics, Tomas Bata Univerzity in Zlin, Czech Republic
Michaela Barinova, Faculty of Applied Informatics, Tomas Bata University in Zlin, Czech Republic
Calibration of Detection System of Crack in Concrete Structure by Using Image Processing Technology (332)
Man-Yong Choi, ESM Center, KRISS, Korea
Su-Un Kim, Department of Architecture Engineering, Hanyang University, Korea
Jeong-Hak Park, ESM Center, KRISS, Korea
Kee-Hwan Jee, Department of Civil Engineering, Chungnam National University, Korea
Sung-Woo Shin, Department of Architecture Engineering, Hanyang University, Korea
Experimental Research of an Inductive Dynamic Drive for Different Coil Power Supply Systems (594)
Piotr Jankowski, Gdynia Maritime University, Poland
Boleslaw Dudojć, Gdynia Maritime University, Poland
Andrzej Piłat, Gdynia Maritime University, Poland
A Novel Sensor for Monitoring Settlement (677)
Pingyu Zhu, Hunan University of Science and Technology, China
Hongyang Zeng, Hunan University of Science and Technology, China
Guilin Jiang, Hunan University of Science and Technology, China
Yang Zhou, Research Centre on Levee Safety & Disaster Prevention Ministry of Water Resources, China
PC Tool for Data Analysis in Calibration of Special Weights (18)
Adriana Valcu, National Institute of Metrology, Romania
Sterica Baicu, National Institute of Metrology, Romania
135
Research and Measurements of Velocity Field During Extrusion Process (33)
Leo Gusel, University of Maribor, Faculty of Mechanical Engineering, Slovenia
Rebeka Rudolf, University of Maribor, Faculty of Mechanical Engineering, Slovenia
The Choice of Method to the Evaluation of Measurement Uncertainty in Metrology (65)
Álvaro Silva Ribeiro, Federal Fluminense University, Dep. of Analytical Chemistry, Institute of Chemistry, Brazil
Evaluating Uncertainties of Laserscanner Measurements by Using a Joint Monte Carlo and Fuzzy Approach (389)
Hamza Alkhatib, Geodetic Institute, Leibniz University of Hannover, Germany
Ingo Neumann, Geodetic Institute, Leibniz University of Hannover, Germany
Hansjürg Kutterer, Geodetic Institute, Leibniz University of Hannover, Germany
Identification of Measurement Data Processing Algorithm Coefficients Presented on Selected Form of FFT Algorithm
(496)
Krzysztof Konopka, Inst. of Measurement Science, Electronics and Control, Silesian Univ. of Technology, Poland
Tadeusz Topór-Kamiński, Inst. of Measurement Science, Electronics and Control, Silesian Univ. of Technology, Poland
The Best Measurand Estimators of Trapezoidal PDF (513)
Warsza Zygmunt Lech, Polish Society of Metrology, Poland
Galovska Maryna, National Technical University of Ukraine, Ukraine
Importance of Scaling in Unsupervised Distance-Based Anomaly Detection (517)
Pekka Kumpulainen, Tampere University of Technology, Finland
Mikko Kylväjä, Aditro, Finland
Kimmo Hätönen, Nokia Siemens Networks, Finland
Shifted Up Cosine Function as Model of Probability Distribution (530)
Zygmunt Lech Warsza, Polish Metrological Society, Poland
Marian Jerzy Korczynski, Technical University of Lodz, Poland
Maryna Galovska, National Technical University of Ukraine "Kyiv Polytechnic Institute", Ukraine
Estimation of Positive Parameters in Form and Roughness Assessment (556)
Improved Vehicle Parameter Estimation Using Sensor Fusion by Kalman Filtering (641)
Erik Steinmetz, SP Technical Research Institute of Sweden, Sweden
Ragne Emardson, SP Technical Research Institute of Sweden, Sweden
Per Jarlemark, SP Technical Research Institute of Sweden, Sweden
Upgrade of the Medium and High Frequency Vibration Calibration Reference Equipment and Extension to Low
Frequencies (165)
Philippe Averlant, LNE Laboratoire National de Métrologie et d'Essais, France
Claire Bartoli, LNE Laboratoire National de Métrologie et d'Essais, France
STASI (Seismic Accelerometers Calibration System) (244)
Aldo Terrusi, ENEA C. R., Italy
Renzo Romagnoli, ENEA C. R., Italy
Roberto Silvestro, ENEA C. R., Italy
Domenico Ianniello, ENEA C. R., Italy
136
Measurements for the Evaluation of Vibration Exposure of Operators in a Ship Container Terminal (431)
Francesco Crenna, Università degli Studi di Genova - DIMEC, Italy
Vibration Analysis Based on Hammer Impact Test for Multi-layer Fouling Detection (457)
Jaidilson Silva, Federal University of Campina Grande, Brazil
Antonio Marcus Lima, Federal University of Campina Grande, Brazil
Franz Neff, Federal University of Campina Grande, Brazil
José Sérgio da Rocha Neto, Federal University of Campina Grande, Brazil
Time Drift of Ocean Bottom Seismometers (OBS) (463)
S. Shariat-Panahi, Sarti Research Group. Technical University of Catalonia in Vilanova i la Geltru, Spain
Antoni Mànuel, Technical University of Catalonia (UPC), Vilanova i la Geltru, Spain
Joaquín del Río, Technical University of Catalonia (UPC), Vilanova i la Geltru, Spain
A New, Low-Cost, on-Line RGB Colorimeter for Wine Industry Based on Optical Fibers (225)
Cristina de la Torre, University of Oviedo, Spain
Rocío Muñiz, University of Oviedo, Spain
Miguel Angel Pérez, University of Oviedo, Spain
A Calibration Method, Based on Ridge LS Estimator Designed for Determination of Olive Oil Mixtures on the Basis of
NIR Spectral Data (263)
Andrzej Miękina, Warsaw University of Technology, Poland
Roman Z. Morawski, Warsaw University of Technology, Poland
Traceability Statement for the Determination of Total Chromium Mass Fraction in Serpentine Soils by Atomic
Absorption Spectrometry (407)
Maria Ascensão Trancoso, Instituto Nacional de Engenharia, Tecnologia e Inovação, Portugal
Sheila Alves, Instituto Superior Técnico, Portugal
Margarida Correia dos Santos, Instituto Superior Técnico, Portugal
Calibration and Verification of Breath Alcohol Detectors in Portugal (476)
Tânia Farinha, Instituto Português da Qualidade, Portugal
Fátima Dias, Instituto Português da Qualidade, Portugal
Evaluation of Measurement Uncertainty for the Moisture and Dry Matter Mass Fractions in Industrial Residues and
Sludges (533)
Filomena C. Mouro, LNEG – Laboratório Nacional de Energia e Geologia, IP., Portugal
Sandra C. Calisto, LNEG – Laboratório Nacional de Energia e Geologia, IP., Portugal
Maria Ascensão Trancoso, LNEG – Laboratório Nacional de Energia e Geologia, IP., Portugal
Study, Development, and Implementation of Analysis Technique of Biphasic Attenuation Systems Using Ultrasound
(545)
Monique K. K. Figueiredo, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil
Rodrigo P. B. Costa-Felix, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil
André V. Alvarenga, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil
Luiz E. Maggi, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil
Marcio F. Portilho, CENPES/Petrobras, Brazil
Marcio N. Souza, Institute of Chemistry, UFRJ, Brazil
Gilberto A. Romeiro, Institute of Chemistry, UFF, Campus of Valonguinho, Brazil
137
Homogeneity Study for Certification of a Candidate Reference Material for Polycyclic Aromatic Hydrocarbons (570)
Evelyn de F. Guimarães, Organic Analysis Laboratory – INMETRO/Chemical Department, Military Institute of Eng., Brazil
Eliane Cristina Pires do Rego, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Helen Cristine Moreira Cunha, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil
Janaína M. Rodrigues, Organic Analysis Laboratory – INMETRO, Brazil
José Daniel Figueroa Villar, IME - Military Institute of Engineering, Chemical Department, Brazil
Valnei Smarçaro da Cunha, Organic Analysis Laboratory – INMETRO/Chemical Dep., Military Institute of Eng., Brazil
138
TC3 Oral Session 9
Friday, 08:30 to 09:50 – Infante D. Henrique Room
TC3 – FORCE MEASUREMENT FROM MICRO- TO PICO-NEWTON
Co-Chairs: Yon-Kyu Park, Force Measurement & Evaluation Lab., KRISS, Korea
Zhimin Zhang, National Institute of Metrology, P. R. China
08:30
Determination of Micro-Forces from 1 µN up to 10 N Realized with a Full Automatically Dead Load Machine
Developed by the BEV (264)
Christian Buchner, BEV- Bundesamt für Eich- und Vermessungswesen, Austria
08:50
Accurate Picoscale Forces for Insitu Calibration of AFM (285)
Koo-Hyun Chung, National Institute of Standards and Technology (NIST), United States of America
Gordon Shaw, National Institute of Standards and Technology (NIST), United States of America
Jon R. Pratt, National Institute of Standards and Technology (NIST), United States of America
09:10
KRISS Approach to Pico-Newton Standard Force Realization (458)
Jae-Hyuk Choi, KRISS, Korea
Min-Seok Kim, KRISS, Korea
Yun Won Kim, KRISS, Korea
Dae-Im Kang, KRISS, Korea
139
TC4 Oral Session 12
Friday, 08:30 to 09:50 – Vasco da Gama Room
TC4 – DIGITAL AND MIXED SIGNAL PROCESSING
Co-Chairs: Artur Lopes Ribeiro, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal
Domenico Grimaldi, University of Calabria, Italy
08:30
Estimation and Prediction of the Clock Phase Fluctuations and Time-Interval Error (71)
Marek Zielinski, Nicolaus Copernicus University, Institute of Physics, Poland
Marcin Kowalski, Nicolaus Copernicus University, Institute of Physics, Poland
Dariusz Chaberski, Nicolaus Copernicus University, Institute of Physics, Poland
Slawomir Grzelak, Nicolaus Copernicus University, Institute of Physics, Poland
08:50
Implementation of Accelerated Impedance Spectrum Measurement Method (600)
Marek Niedostatkiewicz, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
Romuald Zielonko, Gdańsk University of Technology, Dept. of Optoelectronics and Electronic Systems, Poland
09:10
Estimation of Residual Error Parameters for Vector Network Analyzers (62)
Gerd Wübbeler, Physikalisch-Technische Bundesanstalt (PTB), Germany
Rolf Judaschke, Physikalisch-Technische Bundesanstalt (PTB), Germany
09:30
Precise Phase-Sensitive Detector with Switched Two-Terminal RC Network (188)
Andrzej Met, Silesian University of Technology, Poland
Krzysztof Musiol, Silesian University of Technology, Poland
Tadeusz Skubis, Silesian University of Technology, Poland
140
TC8
Friday, 08:30 to 09:50 – Fernão Mendes Pinto Room
TC8 – MEETING
on
Traceability in Metrology
TC8
141
TC14 Oral Session 5
Friday, 08:30 to 09:50 – Luís Vaz de Camões Room
TC14 – MEASUREMENT OF SURFACE CHARACTERISTICS
Co-Chairs: Gerhard Linß, TU Ilmenau, Germany
08:30
Development of Refractory Thickness Meter for Torpedo Ladle Car (60)
Yoshito Isei, Sumitomo Metal Industries, Ltd, Japan
Tatsuro Honda, Sumitomo Metal Industries, Ltd, Japan
Kenichi Akahane, Sumitomo Metal Industries, Ltd, Japan
Hideyuki Takahashi, Sumitomo Metal Industries, Ltd, Japan
08:50
Calculation of Reference Surface Parameters for Elements Whose Generatrix is a Fragment of a Circle (162)
Dariusz Janecki, Kielce University of Technology, Poland
Krzysztof Stepien, Kielce University of Technology, Poland
09:10
2nd Generation Lead Measurement (573)
Jörg Seewig, University of Kaiserslautern, Germany
Tobias Hercke, Daimler AG, Stuttgart, Germany
09:30
Contact and Contactless Investigations of Manufactured High-Precise Surface Structures (680)
M. N. Durakbasa, Vienna University of Technology, Austria
P. H. Osanna, Vienna University of Technology, Austria
M. E. Yurci, Yildiz Technical University, Material Science and Manufacturing Technology, Turkey
P. Aksoy, Vienna University of Technology, Austria
142
TC21 Oral Session 4
Friday, 08:30 to 09:50 – Pedro Álvares Cabral Room
TC21 – MEASUREMENT SOFTWARE, VALIDATION
Co-Chairs: Franco Pavese, INRIM, Italy
Alistair Forbes, National Physical Laboratory, United Kingdom
08:30
Design and Evaluation of Experiments with SAS (247)
Adriana Hornikova, University of Economics in Bratislava, Slovakia
08:50
An Internationally Harmonised Measurement Software Guide: The Need and the Concept (419)
Norbert Greif, Physikalisch-Technische Bundesanstalt (PTB), Germany
Graeme Parkin, National Physical Laboratory, United Kingdom
09:10
Laboratories Best Measurement Capability Validation (598)
143
TC23
Friday, 08:30 to 09:50 – Fernão de Magalhães Room
TC23 – MEETING
on
Metrology in Food and Nutrition
TC23
144
Friday, 11:00 to 12:20 – Infante D. Henrique Room
ST
ROUND TABLE ON HIGHER EDUCATION IN 21 CENTURY
145
TC4 Oral Session 13
TC4 – DIRECT CURRENT AND LOW FREQUENCY MEASUREMENTS
Co-Chairs: Ramon Pallàs-Areny, Universitat Politecnica de Catalunya, Spain
Janusz Smulko, Gdańsk University of Technology, Poland
11:00
A New Method for Insulation Resistance Measurement at Low Voltage Level Using Change of Effective Resistance
(47)
Kyu-Tae Kim, KRISS, Korea
Kwang-Min Yu, KRISS, Korea
11:20
Assessment of Synchronic Detection at Low Frequencies Through DSP-Based Board and PC Sound Card (291)
Mateusz Kotarski, Gdańsk University of Technology, Poland
11:40
Parameters Estimation for a Model of Photovoltaic Panels (622)
Francesco Adamo, Department of Electrics and Electronics - Polytechnic of Bari, Italy
A. Di Nisio, Department of Electrics and Electronics - Polytechnic of Bari, Italy
Anna M. L. Lanzolla, Department of Electrics and Electronics - Polytechnic of Bari, Italy
Maurizio Spadavecchia, Department of Electrics and Electronics - Polytechnic of Bari, Italy
12:00
A Link Between Traditional and Modern Techniques in the Measurement of AC Voltage (142)
Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Bruno Trinchera, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Gian Carlo Bosco, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Marco Lanzillotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
146
TC8 Oral Session 1
Friday, 11:00 to 12:20 – Bartolomeu Dias Room
TC8 – UNCERTAINTY AND STATISTICAL ANALYSIS
Co-Chairs: Carlo Ferrero, INRIM, Italy
Maria Nieves Medina, Head of Mass Division, Spanish Metrology Centre (CEM), Spain
11:00
Validity of Polynomials as Results for Comparisons (281)
José Ángel Robles, Spanish Metrology Centre (CEM), Spain
Javier Castro, Universidad Complutense, Spain
11:20
Choice of the Meaurement Points for a Calibration in a Range (349)
Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
11:40
Type A Evaluation of Uncertainty Due to Systematic Effects in Digital Oscilloscopes (343)
Andrea Cataldo, Department of Engineering for Innovation, University of Salento, Italy
Laura Fabbiano, Polytechnic of Bari, Italy
12:00
Methodology to Evaluate Calibrations: A Study Case Study on the Interlaboratorial Comparison Program (217)
Joel de Jesus Lima Sousa, Companhia Hidroeletrica do São Francisco (CHESF), Brazil
Luiz Torres Sá Leitão, Companhia Hidroeletrica do São Francisco (CHESF), Brazil
147
TC21 Oral Session 5
TC21 – MEASUREMENT APPLICATIONS
Co-Chairs: Jean-Marc Linares, Aix-Marseille University, France
Raghu Kacker, NIST/ITL/MCSD, United States of America
11:00
Uncertainty of Reference Frames Applied to Computer Aided Orthopedic Surgery (94)
Jean-Marc Linares, ISM/GIBO/EA(MS), UMR6233, Aix Marseille University, France
Jean-Michel Sprauel, ISM/GIBO/EA(MS), UMR6233, Aix Marseille University, France
Bernard Schlatterer, Institut des Sports de Monaco, Monaco
11:20
Impact of Model Uncertainties to the Reconstruction of Surface Profiles in Scatterometry (171)
Hermann Gross, Physikalisch-Technische Bundesanstalt (PTB), Germany
Andreas Rathsfeld, Weierstrass Institute for Applied Analysis and Stochasitcs, Berlin, Germany
Frank Scholze, Physikalisch-Technische Bundesanstalt (PTB), Germany
Markus Bär, Physikalisch-Technische Bundesanstalt (PTB), Germany
11:40
Comparison of Error Mapping Techniques for Coordinate Measuring Machines Using the Plate Method and Laser
Tracer Technique (565)
S. Moustafa, National Institute for Standards, Egypt
N. Gerwien, Physikalisch-Technische Bundesanstalt (PTB), Germany
F. Haertig, Physikalisch-Technische Bundesanstalt (PTB), Germany
K. Wendt, Physikalisch-Technische Bundesanstalt (PTB), Germany
12:00
Approximate GCD of Inexact Univariate Polynomials (279)
Pablo Lecumberri, Universidad Pública de Navarra, Spain
Marisol Gómez, Universidad Pública de Navarra, Spain
Alfonso Carlosena, Universidad Pública de Navarra, Spain
148
TC23 Oral Session 1
TC23 – FOOD AND NUTRITIONAL METROLOGY - 1
Co-Chairs: Roman. Z. Morawski, Warsaw University of Technology, Faculty of Electronics and Information Technology, Institute of
11:00
Comparison of Principal Component Regression (PCR) and Partial Least Square (PLS) Methods in Prediction of Raw
Milk Composition by VIS-NIR Spectrometry. Application to Development of on-Line Sensors for Fat, Protein and
Lactose Contents (229)
Carlos Enrique Carleos, University of Oviedo, Spain
Norberto Corral, University of Oviedo, Spain
Jesús Angel Baro, University of Valladolid, Spain
11:20
A Flexible Experimental Set-Up for Development of Spectrophotometric Analysers of Food (59)
Andrzej Miękina, Warsaw University of Technology, Poland
Roman Z. Morawski, Warsaw University of Technology, Poland
11:40
Impedance Spectrometry for Monitoring Alcoholic Fermentation Kinetics Under Wine-Making Industrial Conditions
(228)
Beatriz Garcia, University of Oviedo, Spain
Carlos Enrique Carleos, University of Oviedo, Spain
Raúl Crespo, Dept. de Ingeniería Agroforestal (University of Valladolid), Spain
Luis M. Cárcel, Dept. de Ingeniería Agroforestal (University of Valladolid), Spain
12:00
Experiences in Measuring Density by Fiber Optic Sensors in the Grape Juice Fermentation Process (578)
Camilo Quintáns Graña, Vigo University, Electronic Technology Department, Spain
Jorge Marcos Acevedo, Vigo University, Electronic Technology Department, Spain
Ana Maria Cao y Paz, Vigo University, Electronic Technology Department, Spain
María José Graña Caneiro, Xunta de Galicia, Estación de Viticultura y Enología de Ribadumia, Spain
149
TC24
TC24 – MEETING
on
Chemical Measurements
TC24
150
WORKSHOP ON MEASURING THE IMPOSSIBLE: MEASUREMENT OF CHARACTERISTICS RELATED TO HUMAN PERCEPTION AND
INTERPRETATION
Co-Chairs: Giovanni Rossi, Università degli Studi di Genova - DIMEC, Italy
Koji Ito, Department of Computational Intelligence and System Science, Tokyo Institute of Technology, Japan
13:40
Measurement Related to Human Perception and Interpretation – State of the Art and Challenges (486)
Birgitta Berglund, Dep. of Psychology, Univ. of Stockholm/Inst. of Environmental Medicine, Karolinska Inst., Sweden
14:00
Measurement of Parameters to Value Human Life Extension (178)
Philip Thomas, City University, United Kingdom
Roger Jones, City University, United Kingdom
James Kearns, City University, United Kingdom
14:20
Estimation of Relatively Commanded Force from EMG and Its Appication to Human-Machine Interfaces (106)
Masato Watanabe, Tokyo Institute of Technology, Japan
Yasuhiro Yamamoto, University of Tokyo, Japan
Kumiyo Nakakoji, University of Tokyo, Japan
Hiroyuki Kambara, Tokyo Institute of Technology, Japan
Yasuharu Koike, Tokyo Institute of Technology, Japan
14:40
Customer Satisfaction Surveys: A Simplified Method to Create a Leverage Index using Qualitative Data (316)
Jean-Claude Krynicki, Agilent Technologies, Palaiseau, France
15:00
Multiparametric Measurements of Emotions (667)
Ksenia Sapozhnikova, D. I. Mendeleyev Institute for Metrology, Russia
Roald Taymanov, D. I. Mendeleyev Institute for Metrology, Russia
151
TC3
TC3 – MEETING
on
Measurement of Force, Mass and Torque
TC3
152
TC8 Oral Session 2
Friday, 13:40 to 15:40 – Bartolomeu Dias Room
TC8 – CALIBRATION AND METROLOGICAL CHARACTERIZATION
Co-Chairs: Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica - INRIM, Italy
Michela Sega, Istituto Nazionale di Ricerca Metrologica - INRIM, Italy
13:40
The Use of GC-MS to Support Stability Assessment of Density Reference Liquids (629)
Salvatore Lorefice, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Elena Amico di Meane, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
Michela Sega, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy
14:00
A New Procedure for Detecting Deviations Behind an Undercut by Using Optical Coordinate Measuring Machines
(119)
Matthias Rückwardt, Ilmenau University of Technology, Germany
André Göpfert, Ilmenau University of Technology, Germany
Steffen Lerm, Ilmenau University of Technology, Germany
14:20
Traceability of 633 nm Laser Calibration at NIMT (158)
Monludee Ranusawud, National Institute of Metrology, Thailand
Ketsaya Vacharanukul, National Institute of Metrology, Thailand
Anusorn Tonmueanwai, National Institute of Metrology, Thailand
14:40
Study of Certified Reference Material Preparation Technique for Microelectronic Digital Circuits (88)
Wenjun Chang, Wuhan Digital Engineering Institute, China
Hua Li, Wuhan Digital Engineering Institute, China
15:00
A Semi-Automation Procedure for Dial Comparators Calibration (466)
Albert Garcia Benadí, Metrology and Calibration Lab., Tech. Center in Vilanova i la Geltru, Univ of Catalonia, Spain
S. Shariat-Panahi, Sarti Research Group. Technical University of Catalonia in Vilanova i la Geltru, Spain
Joaquín del Río, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain
15:20
Absolute Calibration of Optical Flats Throgout the Self Comparison and Image Processing (30)
Jose Sánchez, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico
Ruiz Gerardo, Instrumentation & Measurement Department, CCADET, Univ. Nacional Autónoma de México, Mexico
Sergio Padilla, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico
Benjamin Valera, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico
153
TC13 Oral Session 5
Friday, 13:40 to 15:40 – Luís Vaz de Camões Room
TC13 – BIOMEDICAL SENSORS
Co-Chairs: Miguel Angel Perez, University of Oviedo, Spain
Satu Kärki, Department of Automation Science and Engineering, Tampere University of Technology, Finland
13:40
Wireless Flex Sensor Belt Networks for Foetal Movement Monitoring in Low Risk Pregnancies (107)
Luís Borges, University of Beira Interior, Instituto de Telecomunicações-DEM, Portugal
Norberto Barroca, Univ. da Beira Interior, Inst. de Telecomunicações, Dep. de Engenharia Electromecânica, Portugal
Fernando Velez, Univ. da Beira Interior, Inst. de Telecomunicações, Dep. de Engenharia Electromecânica, Portugal
António Lebres, Universidade da Beira Interior, Departamento de Física, Portugal
14:00
High Sensitivity Triaxial Magnetic Field Transducer, Based on the Phase Characteristics of the GMI Effect (223)
Eduardo Costa Silva, Post Graduation Program in Metrology / PUC-Rio, Brazil
Luiz Gusmão, Electrical Engineering Department / PUC-Rio, Brazil
Carlos Hall Barbosa, Post Graduate Program in Metrology / PUC-Rio, Brazil
Elisabeth Costa Monteiro, Post Graduate Program in Metrology / PUC-Rio, Brazil
14:20
Humidity Control System in Newborn Incubator (292)
Enilson José Costa, Federal Center of Tecnological Education of Pernambuco, Recife – PE, Brazil
João Bosco Silva, Universidade Federal da Paraíba - UFPB, Brazil
Carlos Magno Cursino, Univ. de Pernambuco e Centro Federal de Educação Tecnológica de Pernambuco, Brazil
Cláudio Oliveira, Universidade Federal da Paraíba - UFPB, Brazil
Bruno A. M. Pereira, Federal University of Pernambuco, Brazil
Roniere F. L. Silva, Federal University of Campina Grande, Brazil
14:40
A PVDF Sensor with Printed Electrodes for Normal and Shear Stress Measurements on Sole (346)
Satu Kärki, Tampere University of Technology, Finland
Miika Kiiski, Tampere University of Technology, Finland
Matti Mäntysalo, Tampere University of Technology, Finland
15:00
Plantar Pressure Distribution Measurements: An Approach to Different Methods to Compute a Pressure Map (130)
Satu Kärki, Department of Automation Science and Engineering, Tampere University of Technology, Finland
Jukka Lekkala, Department of Automation Science and Engineering, Tampere University of Technology, Finland
Tiina Kaistila, Physical and Rehabilitation Medicine Unit, Tampere University Hospital, Finland
Heikki-Jussi Laine, Department of Orthopaedics and Traumatology, Tampere University Hospital, Finland
Heikki Mäenpää, Department of Orthopaedics and Traumatology, Tampere University Hospital, Finland
Hannu Kuokkanen, Department of Plastic Surgery, Tampere University Hospital, Finland
15:20
A New Low-Cost and Portable Elisa Reader by Using a Photodiode Matrix and Electroluminiscent (EL) Lamps (227)
Beatriz Garcia, University of Oviedo, Spain
Jesús Angel Baro, University of Valladolid, Spain
154
TC14 Oral Session 6
TC14 – TACTILE COORDINATE METROLOGY
Co-Chairs: Gustavo Donatelli, Fundação CERTI, Brazil
Vytautas Giníotis, Inst. of Geodesy, Vilnius Gediminas Technical U-ty, Lithuania
13:40
Self-Calibration of 2D Planar Coordinate Measuring Machine (38)
Ryoshu Furutani, Tokyo Denki University, Japan
14:00
Reducing Dynamically-Induced Deviations for Line Scale Calibration in Non-Ideal Measurement Situation (272)
Saulius Kausinis, Kaunas University of Technology, Lithuania
Algimantas Barakauskas Barakauskas, Precizika-Metrology, Lithuania
Rimantas Barauskas, Kaunas University of Technology, Lithuania
Aurimas Jakstas, Kaunas University of Technology, Lithuania
Albinas Kasparaitis, Vilnius Gediminas Technical University, Lithuania
14:20
Matrix Method for LCMM — Connection Between Subspaces of Reference Points (433)
Jerzy Sładek, Cracow University of Technology, Poland
Marcin Krawczyk, Cracow University of Technology, Poland
14:40
Knowledge-Based Optimisation of the Tactile Scanning Process on CMM (468)
Susanne Nisch, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen Univ., Germany
15:00
Kinematic Metrological Model of the Coordinate Measuring Arm (MCMA) (585)
Jerzy Sładek, Cracow University of Technology, Poland
Ksenia Ostrowska, Cracow University of Technology, Poland
Kamila Gacek, Cracow University of Technology, Poland
15:20
Testing of the Repeatability of Stylus Change of Modular Probes Used in Coordinate Measuring Machines (656)
Adam Wozniak, Warsaw University of Technology, Institute of Metrology and Biomedical Engineering, Poland
155
TC23 Oral Session 2
TC23 – FOOD AND NUTRITIONAL METROLOGY - 2
Co-Chairs: Isabel Castanheira, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
13:40
NIM’s Role in Developing National System of Metrology in Chemistry for Food Analysis (230)
Jun Wang, National Institute of Metrology, China
Hongmei LI, National Institute of Metrology, China
Liandi Ma, National Institute of Metrology, China
14:00
Development of a Certified Reference Material for Nicotinamide in Infant Formula (159)
Jun Liu, National Institute of Metrology, China
Ting Huang, National Institute of Metrology, China
Wei Zhang, National Institute of Metrology, China
Yang Liu, National Institute of Metrology, China
14:20
Quality Control Materials for Analysis of Vitamins in Food (441)
Isabel Castanheira, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
Elsa Vasco, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
Cristina Flores, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
Inês Coelho, Instituto Nacional de Saude Dr. Ricardo Jorge, Portugal
14:40
Determination of Organochlorine Pesticides in Tomato and Evaluation of Proficiency Testing Results (369)
Burcu Binici Gökçen, TUBITAK UME (National Metrology Institute), Turkey
Fatma Akçadağ, TUBITAK UME (National Metrology Institute), Turkey
156
AUTHOR INDEX
Abdalla, Aisha Hassan ................................................. 91
Abreu, Manuel .......................................................... 133
Acevedo, Jorge Marcos ............................................. 149
Adamczak, Stanislaw ......................................... 103, 142
Adamek, Milan .......................................................... 135
Adamo, Francesco ............................................. 102, 146
Adamskl, Tomasz ........................................................ 66
Agrez, Dusan ............................................................... 59
Aguado, Antonio ......................................................... 49
Aguilar, Juan José ................................................ 94, 103
Aguzzi, Jacopo ........................................................... 102
Ahola, Joel ................................................................. 122
Akahane, Kenichi ....................................................... 142
Akçadağ, Fatma ......................................................... 156
Aksoy, P. ................................................................... 142
Alam, A. H. M. Zahirul ................................................. 91
Alar, Željko ................................................................ 134
Alegria, F. Corrêa .................37, 45, 52, 79, 111, 125, 137
Aleksandrov, Tamara................................................. 134
Aliquò, Salvina ........................................................... 114
Alkhatib, Hamza ........................................................ 136
Almeida, Giovanna ...................................................... 95
Almeida, Maria do Céu .............................................. 120
Almeida, Nelson .................................................. 42, 120
Alvarenga, André V. .................................................. 137
Alves, Luciana.............................................................. 95
Alves, Mário ................................................................ 30
Alves, Sheila .............................................................. 137
Amaral, Luiz Fernando G. T........................................ 126
Anagnostopoulos, Christos .......................................... 34
Anda, Miguel Angel Gutierrez de ................................. 45
Andò, Bruno ........................................................ 89, 132
Andrade, Roberto Márcio de ..................................... 108
Andreas, Brüge.......................................................... 113
Andria, G. .................................................................. 126
Andris, Peter ............................................................... 80
Angelis, Alessio De ...................................................... 59
Araújo, Bruna G. M...................................................... 80
Arenhart, Francisco Augusto ....................................... 74
Arias-Romero, Roberto ............................................. 101
Arksonnarong, Nittaya .............................................. 105
Arnaut, Luk.................................................................. 35
Arpaia, Pasquale .................................... 31, 66, 125, 126
Assis, Francisco M. de ................................................. 73
Attila, Unhauzer ........................................................ 106
Attivissimo, Filippo .................................... 102, 146, 147
Aubineau-Lanièce, Isabelle ........................................ 115
Averlant, Philippe ...................................................... 136
Azeredo, Ronaldo N. ................................................. 111
Baccigalupi, Aldo ......................................................... 45
Bach, Jakub ................................................................. 89
Baglio, Salvatore ................................................. 89, 132
Baglivo, Luca ............................................................. 122
Bahng, Gun Woong ..................................................... 40
Baicu, Sterica............................................................. 135
Bair, Michael............................................................. 117
Banaszak, U. ............................................................. 130
Banovic, Mladen ......................................................... 33
Bansevicius, Ramutis ...........................................48, 133
Bao, Doris ................................................................. 126
Baptista, Gonçalo...................................................... 123
Bär, Markus .............................................................. 148
Barakauskas, Algimantas Barakauskas ...................... 155
Barauskas, Rimantas ................................................. 155
Barbato, Giulio ............................................................ 44
Barbosa, Alex Pablo Ferreira ..................................... 100
Barbosa, Carlos Hall .................................................. 154
Bargenda, Jörg .......................................................... 109
Barinova, Michaela ................................................... 135
Baro, Jesús Angel ...............................................149, 154
Baroncini, Davide ...................................................... 123
Barroca, Norberto ..................................................... 154
Barros, P. R. .............................................................. 114
Baršić, Gorana .......................................................... 103
Bartoli, Claire ............................................................ 136
Bartolozzi, Massimo .................................................. 122
Basteris, Angelo .......................................................... 87
Batagelj, Valentin............................... 100, 121, 125, 131
Batista, Elsa .........................................................42, 120
Bátorfi, Richárd ......................................................... 106
Bauman, Maja ............................................................ 92
Becerra, Luis Omar ..................................................... 90
Becerra-Santiago, Luis Omar ..................................... 101
Beciet, Gianfranco Molinar Min ................................ 110
Beges, Gaber ............................................................ 114
Belega, Daniel ......................................................68, 124
Bélières, D. ............................................................... 125
Benadí, Albert Garcia ................................................ 153
Benedet, Mauro Eduardo ........................................... 33
Benedetto, Egidio De .................................................. 30
Beneš, Petr ..........................................................62, 135
Beninato, Angela ...................................................... 132
Benkó, Peter ............................................................. 131
Benoit, Eric ................................................................. 84
Bercea, Sorin .............................................................. 92
Berglund, Birgitta ...................................................... 151
Bernstein, Johannes.................................................. 109
Bertocci, Francesco ..................................................... 62
Bethke, Gabriela ......................................................... 36
Betta, Giovanni ....................................................38, 125
Bettin, Horst ............................................................... 36
Bezruczko, Nikolaus .................................................. 132
Bialek, Agnieszka ........................................................ 82
Bian, Xin ..................................................................... 98
Bianchi, Inácio ............................................................ 83
Bieler, Mark ................................................................ 38
Biesen, Leo Van .....................................................59, 77
Bilas, Vedran ........................................................66, 135
Bilgiç, Eyüp ................................................................. 99
Bilski, Piotr .................................................................. 31
157
Caravaggio, Marcello ................................................ 110
Carbone, Paolo ........................................................... 59
Carbonell, José Ángel Robles ...................................... 90
Carbonell, Montserrat ................................................ 48
Cárcel, Luis M. .......................................................... 149
Cardoso, João ........................................................... 115
Carleos, Carlos Enrique ............................................. 149
Carlosena, Alfonso .............................................127, 148
Carnì, Domenico Luca ..........................................45, 101
Carobbi, Carlo ........................................................... 125
Carvalho, A. ................................................................ 37
Carvalho, Vasco ........................................................ 111
Casanella, Ramon ..................................................... 124
Casas, Óscar.............................................................. 121
Castanheira, Isabel ................................................... 156
Castro, Javier ............................................................ 147
Cataldo, Andrea ...................................................30, 147
Cataliotti, Antonio ...............................................83, 126
Catelani, Marcantonio ...........................................62, 73
Caten, Carla Schwengber ten ...................................... 40
Cavaco, Marco A. M. ................................................... 33
Cavone, Giuseppe ................................................84, 126
Cazarola-Navarro, Antonio........................................ 124
Cecco, Mariolino De.................................................. 122
Celarel, Aurelia ........................................................... 92
Cenusa, Constantin ..................................................... 92
Chaberski, Dariusz .................................................... 140
Chajda, Jan ............................................................... 104
Chang, Wenjun ..................................................100, 153
Changqing, Cai ............................................................ 91
Chantaraksa, Pramann .............................................. 105
Chassot, Jean-Marie ................................................... 71
Chauvenet, Bruno ..................................................... 115
Chen, Chao-Jung ......................................................... 88
Chen, Jiahua ............................................................... 64
Chen, Jiun-Kai ............................................................. 88
Chen, Le ...............................................................97, 131
Chen, Shu-Pi ............................................................. 132
Chesniak, Joyce ......................................................... 132
Chetwynd, Derek G. .................................................. 122
Cheung, Wan-Sup ....................................................... 99
Chiapuzzi, Angelo...................................................... 100
Choi, In-Mook ............................................................. 86
Choi, Jae-Hyuk .......................................................... 139
Choi, Man-Yong ........................................................ 135
Chuchro, Zbigniew ...................................................... 84
Chung, Jin Wan ........................................................... 91
Chung, Koo-Hyun ...................................................... 139
Ciancetta, Fabrizio .................................................... 106
Ciani, Lorenzo ........................................................62, 73
Cibien, Marco ............................................................. 57
Cicala, Claudio .......................................................... 128
Cichy, Adam W. ...................................................66, 124
Cifrek, Mario ............................................................. 121
Číp, Ondřej ................................................................. 95
Clarkson, Paul ........................................................... 128
Claverie, Rémy ............................................................ 71
Clemente, Fabrizio .................................................... 126
Clodic, Denis ............................................................. 134
Bin, Guo .................................................................... 105
Bitas, Shlomi ............................................................... 72
Björsell, Niclas ............................................................. 59
Blard, F. ..................................................................... 125
Blume, Frank ............................................................... 99
Bobiński, Piotr ............................................................. 30
Bock, Wojtek ............................................................... 64
Bohacek, Jaroslav ...................................................... 124
Bojkovski, Jovan ........................................ 100, 125, 131
Bonnier, Georges ...................................................... 108
Bono, Richard .............................................................. 99
Bordy, Jean-Marc ...................................................... 115
Borges, Luís ............................................................... 154
Borghi, Giovanna ......................................................... 89
Bosco, Gian Carlo ...................................................... 146
Bounouh, A. .............................................................. 125
Bourson, Patrice .......................................................... 71
Boveri, Chiara ............................................................ 123
Bovi, Maurizio ........................................................... 115
Bovio, Luca .................................................................. 87
Bozewicz, Dominik .................................................... 102
Brás, Nuno B. .............................................................. 30
Brasseur, Georg........................................................... 82
Brau, Agustín............................................................. 103
Brender, Leonard Voicu ............................................... 31
Bretterklieber, Thomas ............................................... 82
Brosed, Francisco Javier ............................................ 103
Brucas, Domantas ..................................................... 103
Brucke, Martin ............................................................ 99
Brunetti, Luciano ......................................................... 60
Bruns, Thomas ...................................................... 88, 99
Bshara, Mussa ............................................................. 59
Buajarern, Jariya ......................................................... 74
Bucci, Giovanni.......................................................... 106
Buccianti, Roberto ....................................................... 57
Buchner, Christian ............................................... 36, 139
Buga, Arunas ............................................................. 122
Busa, Jan ..................................................................... 79
Buß, Andre .................................................................. 51
Butoescu, Valentin ...................................................... 91
Butorac, Josip ...................................................... 33, 124
Büttner, Lars ....................................................... 74, 130
Buzio, Marco ................................................. 31, 66, 126
Cabral, Alexandre ...................................................... 133
Caciotta, Maurizio ............................................... 65, 128
Calisto, Sandra C. ...................................................... 137
Callegaro, Luca ............................................................ 60
Calvário, J. ................................................................... 37
Calvo, Roberto ............................................................ 86
Camarano, Denise das Mercês .......................... 108, 127
Cambier, Pierre ......................................................... 130
Caminha, Ieda ............................................................. 91
Camões, M. Filomena ................................................ 123
Camon, H. ................................................................. 125
Campo, Dolores del ................................................... 127
Campos, Marcello Luiz Rodrigues de ........................... 65
Caneiro, María José Graña ........................................ 149
Cannazza, Giuseppe .................................................... 30
Capriglione, Domenico ........................................ 38, 125
158
Coelho, Inês .............................................................. 156
Coelho, Régis H. .......................................................... 33
Colombier, Daniel du ................................................... 91
Commara, Giuseppe La ............................................... 31
Contiu, Gald .............................................................. 104
Corral, Norberto ........................................................ 149
Correns, Martin ........................................... 94, 109, 133
Cosentino, Valentina ................................................... 83
Costa, Edson G. ......................................................... 125
Costa, Enilson José .................................................... 154
Costa, Jorge R. ............................................................. 65
Costa, Pedro Bastos .................................................. 134
Costa-Felix, Rodrigo P. B. ........................................... 137
Couceiro, I. B. .............................................................. 95
Couceiro, Iakyra .......................................................... 95
Coull, Craig ................................................................ 101
Couto, Paulo R G ....................................................... 110
Cox, M. G. ................................................................... 42
Crenna, Francesco ............................................... 87, 137
Crespo, Raúl .............................................................. 149
Crisan, Septimiu .................................................. 31, 132
Crisan, Titus Eduard ............................................ 31, 132
Crispu, Stefano .......................................................... 123
Crotti, G. ................................................................... 126
Cruz, António ........................................................ 40, 67
Cunha, Augusto P. ..................................................... 111
Cunha, Helen Cristine Moreira .................................. 138
Cunha, Valnei Smarçaro da ....................................... 138
Cursino, Carlos Magno .............................................. 154
Czaja, Zbigniew ........................................... 37, 124, 134
Czajka, Andrzej ............................................................ 54
Czarske, Jürgen ................................................... 74, 130
D’Acquisto, L. ............................................................ 126
Dąbrowski, Roman ...................................................... 64
Dado, Stanislav............................................................ 52
D'Agostino, Giancarlo .................................................. 44
Dai, Gaoliang ............................................................... 53
Dallet, Dominique ..................................................... 124
Damasceno, Jailton C ................................................ 110
Dantas, Carlos C. ......................................................... 80
Daponte, Pasquale ...................................................... 59
D'Arco, Mauro ............................................................. 45
Darowski, Marek ....................................................... 102
Debei, Stefano .......................................................... 122
Decker, J. E. ................................................................. 98
Delcev, Sinisa .............................................................. 37
D'Elia, Vincenzo ........................................................... 60
Demichelis, Alessia .................................................... 123
Depiereux, Frank ......................................................... 64
D'Errico, Giampaolo E.................................................. 98
Dhulkhed, S. K. ............................................................ 91
Dias, Fátima .............................................................. 137
Dias, Florbela A. .......................................... 92, 123, 137
Dias, Ronaldo ........................................................ 88, 99
Díaz, Delia ................................................................. 121
Dietmar, Mauersberger ............................................. 113
Dijk, Eduard van ........................................................ 115
Dinu, Dumitru ............................................................. 90
Dirk, Röske ................................................................ 113
Dobrogowski, Andrzej ............................................38, 83
Dogan, Aliye Kartal ................................................... 131
Domański, Andrzej W. ................................................ 64
Donatelli, Gustavo Daniel ........................................... 74
Dórea, C. R. T. ........................................................... 114
Douglas, R. J................................................................ 98
Drnovšek, Janko ..........................100, 114, 121, 125, 131
Drutarovsky, Milos ...................................................... 94
Dubecký, F. ............................................................... 115
Dudojć, Boleslaw ...................................................... 135
Dughir, Ciprian ............................................................ 68
Durakbasa, M. N. ...................................................... 142
Durbiano, Francesca ................................................. 123
Durickovic, Ivana ........................................................ 71
Dutta, Mita ................................................................. 90
Dvorak, Filip ................................................................ 64
Dybko, Artur ............................................................... 92
Dygdała, Roman.......................................................... 92
Eftimov, Tinko............................................................. 64
Eichstädt, Sascha ............................................. 35, 38, 88
Elster, Clemens .................................. 35, 38, 51, 88, 140
Emardson, Ragne ...................................................... 136
Enami, Kazuhiro ........................................................ 122
Enz, Stephanie .......................................................... 120
Eom, Tae Bong .....................................................95, 133
Erjavec, Bojan ........................................................... 135
Ertman, Sławomir ....................................................... 64
Espel, Patrick .............................................................. 73
Esward, Trevor ............................................................ 35
Fabbiano, L. .............................................................. 126
Fabbiano, Laura ...................................................84, 147
Falcão, João Batista .................................................. 130
Falco, Stefano De ...................................................... 134
Fallica, Giorgio .......................................................... 132
Farinha, Tânia ........................................................... 137
Feng, Meng............................................................... 105
Ferković, Kristina ........................................................ 66
Ferković, Luka ............................................................. 66
Fernandes, Carlos A. ................................................... 65
Fernandes, Eduardo .................................................... 92
Ferreira, Carlos Pedro ................................................. 92
Ferreira, Cauê ............................................................. 99
Ferreira, Janaina ......................................................... 89
Ferreira, Maria do Céu ................................................ 91
Ferreira, Ricardo Alberto Neto .................................. 127
Ferrero, Carlo ......................................................72, 100
Ferrigno, Luigi ............................................................. 38
Fetisov, Vladimir ......................................................... 91
Fexa, Pavel.............................................................79, 89
Fidler, Petr ................................................................ 135
Figueiredo, Monique K. K. ......................................... 137
Filho, D. M. do Espírito Santo .................................... 100
Filho, Jorge Trota ...................................................53, 61
Filho, Paulo Magalhães ............................................... 83
Filipe, Eduarda .................. 42, 80, 92, 120, 123, 137, 143
Finkelstein, Ludwik ................................................50, 67
Finkler, Christine L. L. .................................................. 80
Fiorucci, Edoardo ...................................................... 106
Fiscarelli, Lucio ........................................................... 31
159
Flores, Cristina .......................................................... 156
Foiatto, Noara ............................................................. 33
Fojtík, František ........................................................... 48
Fontana, Marc ............................................................. 71
Fontgalland, Glauco .................................................... 65
Forbes, Alistair B. ..................................... 42, 82, 98, 136
Frączek, Ewa ............................................................... 89
Frączek, Wojciech ....................................................... 89
Franz, Mladen ........................................................... 134
Freire, Raimundo C. S. .................... 65, 73, 121, 125, 154
Frollo, Ivan .......................................................... 80, 115
Fu, Yaqiong ......................................................... 97, 131
Fuchs, Peter ................................................................ 83
Fujimoto, Shinsaku .................................................... 119
Fujioka, Yoshihiro ........................................................ 51
Fujitsuka, Masayuki ................................................... 134
Fukuda, Kengo .......................................................... 119
Furtado, Andreia ......................................................... 80
Furuhashi, Hideo ......................................................... 89
Furutani, Ryoshu ....................................................... 155
Füßl, Roland ................................................................ 58
Gabris, Frantisek ....................................................... 115
Gacek, Kamila............................................................ 155
Gallo, Daniele .................................................... 106, 128
Galovska, Maryna...................................................... 136
Gam, Kee Sool ........................................................... 127
Gapinski, Bartosz ............................................... 103, 104
Garcia, Beatriz ................................................... 149, 154
Gasulla, Manel .......................................................... 135
George, Boby ........................................................ 65, 82
Georgescu, Rodica....................................................... 64
Gerardo, Ruiz ............................................................ 153
Germak, Alessandro .............................................. 44, 53
Geršak, Gregor .................................................. 102, 121
Geršak, Vesna ........................................................... 102
Gerwien, N. ............................................................... 148
Geurkov, Vadim .......................................................... 79
Giacomin, João Carlos ................................................. 68
Giacoppo, Giosue ........................................................ 86
Giaquinto, Nicola ........................................ 84, 126, 147
Giarnetti, Sabino ................................................. 65, 128
Giniotis, Vytautas .............................................. 103, 133
Giordano, D. .............................................................. 126
Girão, Pedro Silva ............................................ 38, 40, 68
Gläser, Michael ........................................................... 36
Glöckner, Bernd .......................................................... 51
Gogami, Atsushi .......................................................... 97
Gökçen, Burcu Binici.................................................. 156
Golluccio, Giancarlo .................................................... 66
Gomáriz, Spartacus ..................................................... 48
Gomes, Paulo .............................................................. 92
Gómez, Marisol ......................................................... 148
Goodman, Teresa ........................................................ 82
Göpfert, André .................................................. 100, 153
Gordiyenko, Tetyana ........................................... 67, 100
Gouko, Manabu .......................................................... 87
Graña, Camilo Quintáns ............................................ 149
Granovsky, Valery A. ................................................. 103
Greif, Norbert ........................................................... 143
Grieneisen, H. P. H. ..................................................... 95
Grientschnig, Dieter .................................................... 42
Grimaldi, Domenico ....................................... 40, 45, 101
Grindborg, Jan-Erik ................................................... 115
Gross, Hermann ........................................................ 148
Grossi, Pablo Andrade .............................................. 127
Gryboś, Pawel ........................................................... 115
Grysiński, Tomasz ..................................................... 102
Grzelak, Slawomir ..................................................... 140
Grzelka, Miroslaw ..................................................... 104
Gucevic, Jelena ........................................................... 37
Guerra, Antonio Stefano ........................................... 115
Guimarães, Evelyn de F. ............................................ 138
Gusel, Leo ................................................................. 136
Gusmão, Luiz ............................................................ 154
Haasz, Vladimir ......................................................52, 77
Haertig, F. ................................................................. 148
Hahn, Torsten ............................................................. 44
Haines, Rob .............................................................. 117
Hajduk, Tomáš .......................................................... 101
Häkli, Pasi ................................................................. 122
Halaj, Martin ............................................................... 34
Haller, Markus ............................................................ 86
Halttunen, Jouko ........................................................ 82
Hameed, Shihab Abdel................................................ 91
Händel, Peter .............................................................. 59
Hanebeck, Uwe........................................................... 46
Hannachi, Riadh .......................................................... 91
Harada, Takaki .....................................................71, 132
Harris, P. M. ................................................................ 42
Hasse, Lech ..........................................................33, 134
Hätönen, Kimmo ....................................................... 136
Hattori, Koichiro ......................................................... 61
Hauswaldt, Anna-Lisa ............................................42, 46
Hayashi, Terutake ..................................................... 133
Hayashi, Toshiyuki ...................................................... 72
Heblakova, E. ............................................................ 121
Heijden, Gerie van der ................................................ 82
Heijden, Hilko van der................................................. 82
Heinonen, Martti ...................................................... 127
Heise, Bettina ............................................................. 35
Hendricks, Jay H. ....................................................... 117
Hercke, Tobias .......................................................... 142
Hernández, Ivan C. .................................................... 125
Hernández-Sustaita, M. ............................................ 125
Herranz, David .......................................................... 117
Herrmann, Michael ..................................................... 35
Hessling, Jan Peter .................................................35, 48
Higashi, Yasuo........................................................... 122
Hilbrunner, Falko ........................................................ 58
Hill, Constance .......................................................... 132
Ho, Hsin-Chia .............................................................. 88
Hoch, Toralf .............................................................. 130
Hofmann, Dietrich ...................................................... 67
Hoja, Jerzy .................................................................. 37
Holubekova, Zuzana.................................................... 80
Honda, Tatsuro ......................................................... 142
Hong, Seung Soo ....................................................... 117
Hong, Yao ................................................................... 91
160
Honglei, Ji .................................................................. 105
Horak, Goran ............................................................. 135
Hornikova, Adriana ................................................... 143
Hrabina, Jan ................................................................ 95
Hribernik, Ales............................................................. 92
Hribik, Jan ................................................................... 83
Hrnčář, Radomír .......................................................... 48
Hroncová, Ingrid.......................................................... 94
Hruskovic, Miloslav ..................................................... 83
Huang, Ting ............................................................... 156
Huang, Yanyan ............................................................ 97
Huang, Yeu-Jong ......................................................... 88
Hudoklin, Domen ........................................................ 89
Hypszer, Ryszard ......................................................... 64
Ianniello, Domenico .................................................. 136
Ide, Kazunori ............................................................. 110
Ihara, Ikuo ................................................................. 114
Ilić, Damir .............................................................. 60, 66
Iliescu, Elena ............................................................... 92
Ince, Ahmet T. ........................................................... 108
Inglese, Vitaliano ................................................. 31, 126
Inmuta, Tadao ............................................................. 46
Isei, Yoshito ............................................................... 142
Ishibashi, Tatsuya ........................................................ 61
Ishigami, Tamio ........................................................... 88
Ishimaru, Ichirou ................................................. 71, 132
Ishino, Yuji................................................................... 36
Islam, Mohd. Rafiqul ................................................... 91
Ito, Koji........................................................................ 87
Iuchi, Tohru ................................................................. 97
Iwaki, Yasuo ................................................................ 46
Jabłoński, Ireneusz ...................................................... 54
Jäger, Gerd .................................................. 58, 119, 133
Jain, Kamlesh K.................................................... 91, 100
Jain, S. K. ................................................................... 100
Jakovenko, Jiří ............................................................. 73
Jakovljević, Suzana .................................................... 134
Jakstas, Aurimas ........................................................ 155
Jakubowski, Jacek...................................................... 101
Janecki, Dariusz ................................................... 74, 142
Janeiro, Fernando M. .......................................... 38, 111
Jankowski, Piotr ........................................................ 135
Jarlemark, Per ........................................................... 136
Jayashankar, V............................................................. 65
Jedlička, Petr ............................................................... 95
Jedrzejewska-Szczerska, M. ......................................... 64
Jee, Kee-Hwan........................................................... 135
Ježdík, Petr ................................................................ 134
Jian, Wang................................................................... 91
Jiang, Guilin ............................................................... 135
Jing, Lin ..................................................................... 105
Jingan, Ding ................................................................. 91
Jokela, Jorma ............................................................ 122
Jokic, Vesna Spasic .................................................... 115
Jones, Roger .............................................................. 151
Jornada, Daniel Homrich da ........................................ 40
Józwiak, Kazimierz ....................................................... 62
Jr, Adaildo G D'Assunção ............................................. 65
Juan-García, Pablo ....................................................... 49
Judaschke, Rolf ......................................................... 140
Kacker, Raghu N.....................................................42, 98
Kagawa, Yoichiro ...................................................... 119
Kaistila, Tiina............................................................. 154
Kajihara, Yusuke ......................................................... 95
Kajikawa, Hiroaki ...................................................... 110
Kalabin, V. N. ............................................................ 124
Kalemci, Murat ..................................................108, 131
Kalle, Marjanen ........................................................ 100
Kambara, Hiroyuki ...............................................87, 151
Kamiyama, Genichiro ................................................ 134
Kamon, Morihito ...................................................... 119
Kang, Chu-Shik .......................................................... 133
Kang, Dae-Im .....................................................113, 139
Kang, Kee Hoon ........................................................ 127
Karaböce, Baki ............................................................ 99
Karas, S. .................................................................... 121
Karasinskij, Oleh ....................................................... 126
Kariya, Komyo ............................................................. 93
Kärki, Satu ................................................................ 154
Kasparaitis, Albinas ................................................... 155
Kastrevc, Mitja .......................................................... 120
Kasznia, Michal ........................................................... 38
Kaszynski, Roman ....................................................... 45
Katase, Yoshihisa ........................................................ 72
Katayama, Shigeo ..................................................... 134
Katletz, Stefan ............................................................ 35
Katz, Boris ................................................................... 72
Kausinis, Saulius........................................................ 155
Kawajiri, Takeshi ..................................................71, 132
Kayafas, Eleftherios .................................................... 34
Kearns, James ........................................................... 151
Keprt, Jiri .................................................................... 62
Kessel, Rüdiger ......................................................42, 98
Khan, Muzna S. ........................................................... 91
Khan, Sheroz ............................................................... 91
Khan, Wakil............................................................... 117
Kicinski, Wieslaw ........................................................ 93
Kiiski, Miika ............................................................... 154
Kikuchi, Tsuneo ........................................................... 88
Kim, Bong-Hak ............................................................ 97
Kim, Boo-Shik ............................................................. 86
Kim, Jae Wan ............................................................ 133
Kim, Jong-Ahn ........................................................... 133
Kim, Kwang Pyo .......................................................... 91
Kim, Kyu-Tae ............................................................. 146
Kim, Min-Seok .......................................................... 139
Kim, Su-Un ................................................................ 135
Kim, Wan-Seop ......................................................... 124
Kim, Yong Pyong ......................................................... 95
Kim, Yong-Gyoo .................................................127, 131
Kim, Young Gyun ...................................................... 124
Kim, Youngbeom ...................................................... 125
Kim, Yun Won ........................................................... 139
Kinugasa, Tetsuya ..................................................... 119
Kirbaş, Cafer ............................................................... 99
Kirischian, Lev ............................................................. 79
Kirischian, Valeri ......................................................... 79
Klapetek, Petr ............................................................. 71
161
Kylväjä, Mikko........................................................... 136
Laidlaw, Jason ........................................................... 101
Laine, Heikki-Jussi ..................................................... 154
Lamonaca, Francesco ................................................ 101
Landi, Carmine ...................................................106, 128
Landim, R. P. ............................................................... 89
Lanzillotti, Marco ...................................................... 146
Lanzolla, Anna M. L. ...........................................102, 146
Laopoulos, Theodoros .............................................. 111
Lau, Peter ................................................................. 120
Lavante, Ernst von .................................................... 130
Lay-Ekuakille, Aimé ..................................................... 68
Lazar, Josef ................................................................. 95
Lebres, António ........................................................ 154
Leccese, Fabio................................................ 52, 65, 128
Lech, Warsza Zygmunt .............................................. 136
Lecumberri, Pablo ..................................................... 148
Lee, Dong-Hoon .......................................................... 97
Lee, Ho-Young ............................................................ 86
Lee, Sung Hun ............................................................. 95
Lee, Sungjun ............................................................... 91
Lee, Yongbum ........................................................... 101
Lee, Youngkyu .......................................................... 125
Legras, Jean-Claude .................................................. 134
Leitão, Luiz Torres Sá ................................................ 147
Leka, Adelina .............................................................. 72
Lekkala, Jukka .............................................. 82, 102, 154
Leniček, Ivan ............................................................... 60
Lentino, Carmelo ........................................................ 87
Lentka, Grzegorz ......................................................... 37
León-Martínez, Vicente ............................................ 124
Leonowicz, Zbigniew ................................................. 128
Leopardi, Maurizio .................................................... 101
Lerm, Steffen .....................................................100, 153
Lesiak, Piotr ................................................................ 64
Levandi, Tuuli ............................................................. 40
Lewandowski, Damian ................................................ 92
LI, Hongmei .............................................................. 156
Li, Hua .................................................................31, 153
Liccardo, Annalisa ....................................................... 45
Licht, Torben..........................................................88, 99
Lietz, Sara ................................................................... 90
Lima, Antonio Marcus ........................................102, 137
Lin, Yi-Ching .............................................................. 119
Linares, Jean-Marc .................................................... 148
Link, Alfred ................................................ 35, 38, 51, 88
Linß, Gerhard ................................. 67, 94, 109, 133, 153
Lipari, Alessandro ....................................................... 83
Lira, Ignacio ................................................................ 42
Lira, José G. A. .......................................................... 125
Lisowski, Przemyslaw .................................................. 83
Lito, M.J. Guiomar .................................................... 123
Liu, Jun ..................................................................... 156
Liu, Qian ...................................................... 31, 100, 153
Liu, Yang ................................................................... 156
Lobnik, Aleksandra...................................................... 92
Loebl, Tomas ............................................................ 103
Lojko, Branislav ........................................................... 83
López, Mariano ......................................................... 127
Klasinc, Roman .......................................................... 120
Klaus, Adolf ............................................................... 113
Kleckers, Thomas ........................................................ 58
Kneller, Vladimir.......................................................... 84
Kneppo, P. ................................................................. 121
Knott, Andy ................................................................. 72
Kobata, Tokihiko ....................................................... 110
Koch, Cláudio Afonso ...................................... 53, 61, 91
Kocourek, Petr ............................................................ 94
Koike, Yasuharu ................................................... 87, 151
Kojima, Katsuyuki ...................................................... 101
Kolláth, Ľudovít ........................................................... 34
Komiyama, Susumu ..................................................... 95
Komori, Masaharu ..................................................... 109
Kondo, Yohan .................................................... 103, 109
König, Niels ................................................................. 64
Konkarikoski, Kimmo ................................................... 46
Kono, Akihiro .............................................................. 89
Konopka, Krzysztof .................................................... 136
Konrad, Herrmann ...................................................... 53
Korczynski, Marian Jerzy ........................................... 136
Kornhauser, Peter ....................................................... 72
Koschmieder, Felix .................................................... 130
Kosmowski, Bogdan B. ................................................ 64
Kosunen, Antti .......................................................... 115
Kotarski, Mateusz...................................................... 146
Kovacevic, Dragan ................................................. 33, 60
Kowalewski, Michal ..................................................... 37
Kowalski, Marcin ....................................................... 140
Krajíček, Zdeněk ........................................................ 101
Krämer, Philipp ......................................................... 122
Krapf, Gunter ............................................................ 108
Krawczyk, Marcin ...................................................... 155
Krisch, H. ................................................................... 130
Krois, Igor .................................................................. 121
Krynicki, Jean-Claude ................................................ 151
Krystek, Michael .......................................................... 46
Krzysztof, Krzysztof ................................................... 102
Kubař, Miloslav ........................................................... 73
Kucera, Jan ................................................................ 124
Kudo, Ryota................................................................. 71
Kudryavtsev, Mikhail D. ............................................. 103
Kuehn, Olaf ................................................................. 67
Kuhinek, Dalibor ........................................................ 124
Kuhn, Sven ................................................................ 113
Kühnel, Michael .......................................................... 58
Kulderknup, Edi ........................................................... 40
Kulinczak, Artur ......................................................... 120
Kumar, Anil ............................................................... 100
Kumar, V. Jagadeesh ................................................... 65
Kume, Tatuya ............................................................ 122
Kumme, Rolf ............................................ 44, 51, 90, 113
Kumpulainen, Pekka .................................................. 136
Kunz, Mieczysław ........................................................ 92
Kuokkanen, Hannu .................................................... 154
Kureková, Eva...................................................... 34, 103
Kutterer, Hansjürg ..................................................... 136
Kuwagait, Tomohito .................................................... 90
Kuzu, Cihan ................................................................. 61
162
López-López, M. ........................................................ 125
Lorefice, Salvatore .............................................. 91, 153
Loureiro, F. C. C. ........................................................ 102
Low, Samuel ................................................................ 53
Lucena, Samuel E. de................................................. 102
Lucev, Zeljka .............................................................. 121
Luciano, Benedito A. ................................................. 125
Luiso, Mario ...................................................... 106, 128
Lukic, Jelena ................................................................ 33
Luna-Lozano, Pablo ................................................... 121
Lunardelli, Massimo .................................................. 122
Ma, Laina .................................................................... 97
Ma, Liandi ................................................................. 156
Macedo, Euler C. T. ................................................... 125
Machado, Renato Reis.............................. 53, 61, 91, 134
Maciej, Kozarski ........................................................ 102
Mack, Oliver .............................................................. 119
Macura, Pavel ............................................................. 48
Madeira, Ana .............................................................. 92
Mądry, Łukasz ........................................................... 104
Mäenpää, Heikki ....................................................... 154
Maggi, Luiz E. ............................................................ 137
Magnone, Michael ...................................................... 52
Mahesh, Gopal ............................................................ 65
Mahović, Sanjin ......................................................... 103
Maia, Marcelo J. A. .................................................... 125
Makowski, Łukasz...................................................... 101
Malfa, S. La.................................................................. 89
Malinsky, Jan ............................................................... 94
Mallmann, Guilherme Francisco .................................. 64
Manna, Carlo .................................................... 125, 126
Mannikoff, Anders ...................................................... 35
Mäntysalo, Matti....................................................... 154
Mànuel, Antoni ...................... 37, 48, 102, 127, 137, 153
Manzoli, José ...................................................... 89, 115
Marcherri, Mario ......................................................... 71
Marcuzzi, Enrico ........................................................ 122
Mari, Luca ................................................................... 57
Maria, Paolo De......................................................... 110
Marinari, Carlo .................................................... 44, 113
Marletta, Vincenzo .................................................... 132
Marracci, Mirko......................................................... 126
Martin, David ............................................................ 122
Martin, Julien .............................................................. 71
Martin, Maria Jose .................................................... 127
Martinec, Pavel ......................................................... 135
Martinek, Pravoslav .................................................... 73
Martins, Ana Rosa ....................................................... 91
Martins, Luís Lages .................................................... 127
Martins, P. A. F. ........................................................... 30
Martins, Raul C. ........................................................... 30
Martti, Mäkinen ........................................................ 100
Maryna, Galovska...................................................... 136
Maschke, Jan............................................................... 64
Masnicki, Romuald ...................................................... 89
Matlinski, Krzysztof ................................................... 104
Matsuyama, Eri ......................................................... 101
Maurício, P. ................................................................. 37
Mäuselein, Sascha ..................................................... 119
Mayorga, Javier Valle .................................................. 89
Mazzoleni, Fabrizio ..................................................... 44
Meane, Elena Amico di ......................................123, 153
Mecke, Michael .......................................................... 36
Medina, Maria Nieves .................... 86, 90, 117, 135, 147
Meesaplak, Apichaya .................................................. 61
Mejía-Aguilar, Abraham .............................................. 65
Melnichuk, Olga .......................................................... 91
Melo, Silvio B. ............................................................. 80
Melo, Victor F. M. B. ................................................... 65
Mende, Michael.......................................................... 99
Méndez-García, V. H. ................................................ 125
Menelao, Febo............................................................ 53
Met, Andrzej ........................................................60, 140
Mettänen, Marja ........................................................ 67
Michaeli, Linus .......................................................79, 94
Michalski, Andrzej..................................................... 101
Michalski, Ranny ......................................................... 92
Michihata, Masaki .................................................... 133
Miękina, Andrzej ................................................137, 149
Miele, Gianfranco ................................................38, 125
Migliorini, Fabrício Lima ............................................ 127
Miklavec, Andraž ...................................................... 100
Mikulic, Predrag.......................................................... 64
Milosavljevic, Srdjan ................................................... 60
Milovancev, Slobodan ................................................. 46
Mindykowski, Janusz ................................... 89, 128, 135
Ming, Dai .................................................................. 105
Mitrovic, Zoran ......................................................46, 84
Mitsas, Christos L. ....................................................... 98
Miyahara, Kensuke ..................................................... 61
Miyake, Kouta............................................................. 51
Mizuno, Takeshi .......................................................... 36
Mizutani, Yasuhiro ...................................................... 90
Mohan, Vishwanathan ................................................ 87
Montañana-Romeu, Joaquím.................................... 124
Montanini, Roberto .............................................86, 114
Monteiro, Elisabeth Costa......................................... 154
Montenero, Giuseppe ............................................... 125
Montgomery, Ruth ..................................................... 82
Morando, A. ............................................................. 126
Morasso, Pietro .......................................................... 87
Morawski, Roman Z. ..........................................137, 149
Moreira, Cleumar ..................................................... 102
Moreira, M. A. .......................................................... 114
Morgado, Isabelle ..................................................... 134
Morimoto, Yoshitaka .................................................. 58
Moroń, Zbigniew ...................................................... 102
Moura, Eduardo ..................................................89, 115
Moura, João.............................................................. 115
Mouro, Filomena C. .................................................. 137
Moustafa, S. ............................................................. 148
Mroczka, Janusz .....................................................54, 89
Müller, Harald........................................................... 130
Muñiz, Rocío .............................................. 137, 149, 154
Murakami, Edwardo Arata Y. ...................................... 87
Musiol, Krzysztof .................................................60, 140
Muzik, J..................................................................... 121
Nabuco, Marco ........................................................... 92
163
Nakai, Daisuke........................................................... 133
Nakajima, Yasutaka ..................................................... 93
Nakakoji, Kumiyo ...................................................... 151
Napolitano, Daniele Domenico ............................ 59, 126
Nastran, Janez ............................................................. 42
Naumovic-Vukovic, Dragana ................................. 33, 60
Návorka, Michal .......................................................... 92
Nečas, D. ..................................................................... 71
Neděla, R..................................................................... 49
Nedeljkovic, David ....................................................... 42
Neff, Franz ................................................................ 137
Neff, Helmut ............................................................. 102
Neto, Alfredo Gomes................................................... 65
Neto, Arlindo Barreto ................................................ 102
Neto, José Sérgio da Rocha ............................... 114, 137
Netto, Annibal Duarte Pereira ................................... 123
Neumann, Ingo ......................................................... 136
Nickels, Patrick ............................................................ 95
Nicklich, Holger ..................................................... 88, 99
Nieciag, Halina ............................................................ 84
Niedostatkiewicz, Marek ..................................... 35, 140
Niemann, Henning ...................................................... 36
Nikolic, Aleksandar ...................................................... 37
Nilsson, John-Olof ....................................................... 59
Nisch, Susanne .......................................................... 155
Nishino, Atsuhiro ...................................................... 105
Nisio, A. Di................................................................. 146
Nodari, Christine Tessele ............................................. 33
Nogueira, César A. A.................................................... 33
Normanno, A............................................................. 126
Novák, Jirí ................................................................. 134
Novak, M..................................................................... 49
Novak, P. ..................................................................... 49
Nowinowski-Kruszelnicki, Edward ............................... 64
Nozato, Hideaki ........................................................... 88
Nuccio, Salvatore ........................................................ 83
Nunes, M. João ......................................................... 123
Oberto, Luca ............................................................... 60
Odon, Andrzej ............................................................. 90
Ogino, Luiz Macoto ............................................. 60, 124
Ogrizovic, Vukan ......................................................... 37
Ogushi, Koji ............................................................... 105
Ohbayashi, Riki ............................................................ 93
Ohlidal, Ivan ................................................................ 71
Ohlidal, Miloslav.......................................................... 71
Olesz, Marek ............................................................... 62
Oliveira, Amauri ................................................ 114, 126
Oliveira, Carlos .......................................................... 115
Oliveira, Cláudio ........................................................ 154
Oliveira, Eric F. de ....................................................... 80
Oliveira, Jackson S. .................................................... 110
Oliveira, L. C. ............................................................. 102
Oliveira, Luiz Henrique Paraguassú de ............... 100, 110
Oliveira, Rafael Soares de ............................................ 91
Oliveira, Sérgio Pinheiro de ................................... 53, 61
Olson, Douglas A. ...................................................... 117
Olszyna, Jakub ............................................................. 66
Olvera, Pablo ............................................................. 135
Ono, Toshiro ....................................................... 51, 119
Oota, Akihiro .............................................................. 88
Oppermann, Klaus ...................................................... 58
Oproiu, Constantin ..................................................... 64
Origlia, Claudio ........................................................... 53
Orlando, A. F. .............................................................. 86
Orlic, Milan ............................................................... 115
Osanna, P. H. ............................................................ 142
Osawa, Sonko ....................................................103, 109
Ostaszewska, Anna ..................................................... 82
Ostrowska, Ksenia .................................................... 155
Otal, Pierre ............................................................... 134
Otani, Yukitoshi .......................................................... 90
Overvliet, Krista .......................................................... 82
Ozdemir, Kursat ........................................................ 131
Padilla, Sergio ........................................................... 153
Pałczyńska, Beata ....................................................... 68
Palenčár, Rudolf ................................................103, 131
Pallàs-Areny, Ramon .................................... 65, 121, 124
Palma, João .............................................................. 120
Palma, Ligia S. ........................................................... 126
Pan, Fu-Lung ............................................................. 119
Pan, Sheau-shi .....................................................36, 119
Panaro, José Santo Guiscafré ...................................... 83
Pankanin, Grzegorz L. ............................................... 120
Papadopoulou, Anthi ................................................ 111
Papez, Vaclav ....................................... 52, 101, 124, 134
Papezova, Stanislava .................................. 101, 124, 134
Parilkova, Jana ............................................................ 92
Park, Chul-Woung ....................................................... 97
Park, Jeong-Hak ........................................................ 135
Park, Jookeun ............................................................. 40
Park, Po Gyu ............................................................. 124
Park, Seung-Nam ........................................................ 97
Park, Yon-Kyu .............................................. 90, 113, 139
Park, Young Tae ........................................................ 124
Parkin, Graeme ......................................................... 143
Parzianello, Giorgio ................................................... 122
Pastor, Jorge Juan ....................................................... 94
Patau, Oriol................................................................. 49
Paulino, Giuliano....................................................... 130
Pavlik, Jiri .................................................................... 92
Pavlovcic, France ........................................................ 42
Pawlowski, Michal .................................................... 103
Paz, Ana Maria Cao y ................................................ 149
Pellegrino, Olivier ..................................................40, 80
Pellicci, Guido ........................................................... 125
Peña, Luis Manuel....................................................... 90
Pereira, Bruno A. M. ................................................. 154
Pereira, Guilherme Augusto Silva .............................. 132
Pereira, J. M. Dias ............................................ 30, 40, 68
Pereira, Roberto Guimarães...................................... 100
Pereira, Tiago Pontes ................................................ 121
Pérez, Miguel Angel ................................... 137, 149, 154
Perković, Silvano ......................................................... 66
Pertile, Marco ........................................................... 122
Peruzzi, A. ................................................................... 98
Pesaljevic, Mile ........................................................... 46
Petteri, Ojala............................................................. 100
Pfister, Thorsten ......................................................... 74
164
Piedade, Moisés .......................................................... 30
Piengbangyang, Samana.............................................. 74
Piłat, Andrzej ............................................................. 135
Pimentel, J. ................................................................. 37
Pimpinella, Maria ...................................................... 115
Pinheiro, Eduardo ....................................................... 38
Pinot, Patrick ......................................................... 90, 91
Pinto, Marcus Vinicius Viegas ...................................... 33
Piras, Gian Carlo ........................................................ 123
Pires, Carlos ................................................................ 40
Pirolla, Jorge ............................................................. 115
Piskorowski, Jacek ....................................................... 45
Pitarresi, G. ............................................................... 126
Pitrone, Nicola .................................................... 89, 132
Piuzzi, Emanuele ......................................................... 30
Poddar, H. N. P. ......................................................... 100
Podestà, Luca ............................................................ 128
Podgornik, Tadej ....................................................... 125
Pogliano, Umberto ............................................ 146, 147
Polak, Adam G. ............................................................ 54
Polder, Gerrit .............................................................. 82
Polese, Nello ............................................................. 134
Poletaeff, Andre .......................................................... 73
Poloszyk, Stanislaw ................................................... 127
Poniatowska, Malgorzata .......................................... 103
Pooter, Jacco de ........................................................ 115
Pop, Grigore .............................................................. 104
Popa, Marcel Sabin ........................................... 104, 127
Porath, Mauricio de Campos ....................................... 74
Porter, Robert ........................................................... 132
Portilho, Marcio F...................................................... 137
Postolache, Octavian ..................................30, 37, 38, 68
Pratt, Jon R. ............................................................... 139
Pražák, Dominik ........................................................ 101
Predin, Andrej ........................................................... 120
Přibil, Jiri ............................................................. 80, 115
Pronselev, Stanislava ................................................. 126
Psyllos, Apostolos........................................................ 34
Pušnik, Igor ............................................................... 100
Putrimas, Raimundas ................................................ 122
Quagliotti, Danilo ........................................................ 44
Radil, Tomáš........................................................ 38, 128
Rak, R. ......................................................................... 40
Rambabu, Talari .......................................................... 90
Ramirez, Lautaro ......................................................... 90
Ramos, Helena Geirinhas ...................................... 30, 37
Ramos, Pedro M. .................................... 30, 38, 111, 128
Ranusawud, Monludee ............................................. 153
Rapuano, Sergio .......................................................... 59
Rathsfeld, Andreas .................................................... 148
Raunio, Jukka-Pekka .................................................... 80
Re, Erik Molino Minero ............................................. 127
Rebaglia, Bruno ........................................................... 57
Rebordão, José M...................................................... 133
Rego, Eliane Cristina Pires do ............................ 123, 138
Reis, Fabiana ............................................................... 95
Reis, Maria Luísa ....................................................... 130
Reverter, Ferran ........................................................ 135
Ribeiro, Álvaro Silva .................................. 120, 127, 136
Ribeiro, Artur Lopes ...............................................30, 37
Rides, Martin .............................................................. 82
Riim, Jürgen ................................................................ 40
Río, Joaquín del ................................... 37, 102, 137, 153
Ripper, Gustavo ............................................... 88, 92, 99
Ritala, Risto...................................................... 46, 67, 80
Robinson, Andy........................................................... 72
Robledo, Alfonso Lobo ................................................ 90
Robles, José Ángel .................................................... 147
Rocha, Gelson M. .................................................89, 124
Rocha, T. ..................................................................... 37
Röck, H. .................................................................... 130
Rodrigues, C. R. da Costa .......................................... 100
Rodrigues, Janaína M. ............................................... 138
Rodrigues, Nuno ......................................................... 92
Roehe, João Miguel Lac .............................................. 33
Roeske, Dirk .............................................................. 113
Roesler, Carlos Rodrigo ............................................... 91
Roger-Folch, José ...................................................... 124
Romagnoli, Renzo ..................................................... 136
Romeiro, Gilberto A. ................................................. 137
Rosa, Valter C. .......................................................... 126
Rosado, Luís ................................................................ 30
Rosenberger, Maik........................94, 100, 109, 133, 153
Roset, Xavier ................................................ 48, 102, 127
Rosik, V. .................................................................... 121
Röske, Dirk.................................................................. 90
Rossi, Giovanni Battista ............................... 87, 137, 151
Rossi, Luca ................................................................ 125
Rostelatto, Maria Elisa Chuery Martins ..................... 115
Rozanski, Leszek ....................................................... 127
Roztocil, Jaroslav ........................................................ 52
Rucki, Miroslaw ........................................................ 103
Rückwardt, Matthias .........................................100, 153
Rudolf, Rebeka ......................................................... 136
Ruiz, Salustiano ............................................ 86, 117, 135
Runje, Biserka ........................................................... 103
Rybokas, Mindaugas ................................................. 133
Ryniewicz, Andrzej .................................................... 102
Ryniewicz, Anna M.................................................... 102
Ryskin, Alexandr I. .................................................... 103
Ryu, Han Young .......................................................... 95
Sadikeğlu, Enver ......................................................... 99
Saenkhum, Nattapon ................................................ 105
Sakmar, Michal ........................................................... 79
Sakuma, Fumihiro ....................................................... 97
Šala, Alan .................................................................... 60
Salbøl, Sven Erik.......................................................... 88
Saliga, Jan ..............................................................79, 94
Salpavaara, Timo ........................................................ 82
Salvio, L. A. Di ............................................................. 86
Sampaio, João ............................................................. 92
Samper, David ............................................................ 94
Sánchez, Jose ............................................................ 153
Sander, Thorsten ...................................................... 115
Sanguineti, Vittorio ..................................................... 87
Sanponpute, Tassanai ..........................................61, 105
Santolaria, Jorge ..................................................94, 103
Santos, Alexandre Bessa dos ....................................... 89
165
Santos, Carlos Pina dos.............................................. 127
Santos, M. Graça dos................................................... 80
Santos, Margarida Correia dos .................................. 137
Santos, Telmo ............................................................. 30
Santos, Valdemir A. dos............................................... 80
Sapozhnikova, Ksenia .......................................... 67, 151
Sardà, Francesc ......................................................... 102
Sarmiento-Reyes, Arturo ............................................. 45
Sarriá, David .............................................................. 102
Sasajima, Kazuyuki .................................................... 103
Sassi, Guido ............................................................... 123
Sassi, MariaPaola ...................................................... 123
Sato, Osamu ...................................................... 103, 109
Savarin, Alejandro ....................................................... 44
Savino, M. ................................................................. 126
Scarano, Valeria L ........................................................ 62
Schäfer, André ............................................................ 86
Schalles, Marc ........................................................... 108
Schellhorn, Mathias ..................... 94, 100, 109, 133, 153
Schiefer, Mark ............................................................. 99
Schiel, Detlef ............................................................... 36
Schlatterer, Bernard .................................................. 148
Schlegel, Christian ................................................. 36, 51
Schlolz, Frank .............................................................. 36
Schmähling, Franko ..................................................... 88
Schmitt, Robert ................................................... 64, 155
Scholze, Frank ........................................................... 148
Schumann, Maik ......................................... 94, 109, 133
Schwartz, Roman ...................................................... 119
Schwind, Daniel ..................................................... 44, 90
Sedlacek, Milos ........................................................... 38
Sedlacek, Radek ........................................................ 124
Seewig, Jörg .............................................................. 142
Sega, Michela .................................................... 123, 153
Seidel, Mark ................................................................ 44
Seino, Yutaka .............................................................. 61
Selbach, Hans-Joachim .............................................. 115
Sellone, Marco ............................................................ 60
Selmo, Antonio ......................................................... 122
Serazio, Danilo .......................................................... 123
Šerbec, Irena Nančovska ........................................... 121
Serra, A. Cruz ...................................................... 30, 128
Sestan, Daniel ........................................................... 127
Setina, Janez ............................................................. 135
Setti, Francesco ......................................................... 122
Shariat-Panahi, S. .............................................. 137, 153
Shaw, Gordon ........................................................... 139
Shcheulin, Alexandr S. ............................................... 103
Shen, Senzu ................................................. 31, 100, 153
Shi, Zhengle ......................................................... 31, 100
Shifirn, Vladlen Ya. .................................................... 124
Shin, Sung-Woo ......................................................... 135
Shin, Y. H. .................................................................. 117
Shinozaki, Naoya ......................................................... 72
Siddiolo, A. M. ........................................................... 126
Siebert, Bernd ............................................................. 42
Sienkiewicz, Jan ......................................................... 101
Silva, A. M. ................................................................ 111
Silva, Eduardo Costa .................................................. 154
Silva, Egonn Hendrico Carvalho ................................. 127
Silva, Elson José da ..................................................... 68
Silva, Islei Domingues da ........................................53, 61
Silva, Jaidilson ........................................................... 137
Silva, João Bosco ....................................................... 154
Silva, Marcus Tadeu Pinheiro .................................... 132
Silva, Rodrigo ............................................................ 108
Silva, Roniere F. L. ..................................................... 154
Silva, T. Ferreira da ..................................................... 95
Silvestri, Zaccaria ...................................................90, 91
Silvestro, Roberto ..................................................... 136
Simões, M. .................................................................. 37
Singuaroli, Roberto ..................................................... 62
Siqueira, José Renato Real ........................................ 100
Skog, Isaac .................................................................. 59
Skórkowski, Artur ....................................................... 66
Skrzypczak, L. .............................................................. 40
Skubis, Tadeusz....................................................60, 140
Skundric, Slobodan ................................................33, 60
Sładek, Jerzy ............................................................. 155
Slepicka, David ............................................................ 52
Śmigielski, Grzegorz .................................................... 92
Smith, I. M. ................................................................. 42
Smulko, Janusz....................................... 33, 62, 134, 146
Sobrinho, José Pinto Ferreira ...................................... 83
Sochor, Vladimír ....................................................... 115
Sokola, M.................................................................... 84
Šolc, Jaroslav ............................................................ 115
Šolić, Sanja ................................................................ 134
Sommer, Klaus-Dieter ...................................... 42, 46, 98
Somthong, Thammarat ............................................... 74
Song, Chang Ho......................................................... 127
Song, Han-Wook ....................................................86, 90
Song, John .................................................................. 53
Sousa, João Alves e ..............................................42, 136
Sousa, Joel de Jesus Lima .......................................... 147
Souza, Cleonilson Protásio de ..............................73, 121
Souza, Marcio N. ....................................................... 137
Sovlukov, Alexander ................................................. 120
Spadavecchia, Maurizio .....................................102, 146
Spearman, Edmund .................................................. 101
Spitzer, Meinhard ....................................................... 38
Sporea, Adelina .......................................................... 64
Sporea, Dan ................................................................ 64
Sprauel, Jean-Michel ................................................. 148
Squadrito, Gaetano..................................................... 86
Staněk, František ...................................................... 101
Staniek, Roman ......................................................... 104
Stastny, J..................................................................... 49
Steele, Alan G ............................................................. 98
Ştefănescu, Dan Mihai ................................................ 91
Stefański, Krzysztof ..................................................... 92
Steinmetz, Erik .......................................................... 136
Stephani, Henrike ....................................................... 35
Stepien, Krzysztof ..............................................103, 142
Stevanovic, Ilija ........................................................... 37
Stoklasek, Radek ......................................................... 92
Stoudek, Zdenek ......................................................... 38
Šubrt, Ondřej .............................................................. 73
166
Sugimoto, Takao ......................................................... 54
Suh, H. ................................................................ 95, 125
Sun, Jian .............................................................. 97, 131
Sun, Jianxin ................................................................. 51
Suzawa, Hiroshi ........................................................... 72
Svatoš, Jakub......................................................... 79, 89
Szarka, Angela Varadine .............................................. 94
Szweda, Mariusz ....................................................... 126
Szymanski, Mateusz .................................................. 132
Takahashi, Hideyuki .................................................. 142
Takahashi, Manabu ................................................... 114
Takahashi, Mitsuru ...................................................... 87
Takahashi, Satoru ........................................................ 71
Takamasu, Kiyoshi ....................................................... 71
Takasaki, Masaya ........................................................ 36
Takatsuji, Toshiyuki ................................................... 109
Takaya, Yasuhiro ....................................................... 133
Takayama, Shigeru ...................................................... 93
Takuma, Takashi.................................................. 71, 132
Tamura, Junichi ........................................................... 51
Tanaka, Osamu ........................................................... 51
Tao, Li ....................................................................... 105
Taranow, Sergiej ....................................................... 126
Tarasiuk, Tomasz ....................................................... 128
Tarnovan, Ioan Gavril ................................................ 132
Tarricone, Luciano ....................................................... 30
Täubner, Angelika ....................................................... 99
Taymanov, Roald ................................................. 67, 151
Tebrean, Bogdan ....................................................... 132
Tefelska, Marzena ....................................................... 64
Tegtmeier, Falk ..................................................... 44, 90
Teixeira, Dimas ............................................................ 99
Teixeira, Renato ........................................................ 108
Tellini, Bernardo ........................................................ 126
Tereshin, Victor ......................................................... 120
Terrusi, Aldo .............................................................. 136
Tesař, Jiří ................................................................... 101
Tesyk, Yurij ................................................................ 126
Theopoulos, Argiris ................................................... 111
Thomas, Philip ........................................................... 151
Tika, Theodora .......................................................... 111
Tinè, G....................................................................... 126
Titus, S. S. K. ........................................................ 91, 100
Toczek, Wojciech ...................................................... 134
Todisco, Maria Teresa ............................................... 101
Toma, Daniel ............................................................... 37
Toni, Maria Pia .......................................................... 115
Tonmueanwai, Anusorn ...................................... 74, 153
Topór-Kamiński, Tadeusz........................................... 136
Tordi, Massimiliano ................................................... 122
Torre, Cristina de la ................................... 137, 149, 154
Torrents, Josep M. ...................................................... 49
Torres, Cláudio Leão .................................................... 73
Torres, Miguel ............................................................. 95
Torres-Guzmán, Jorge C. ............................. 44, 101, 135
Tournillon, Sylvain ..................................................... 130
Trancoso, Maria Ascensão ......................................... 137
Trinchera, Bruno ................................................. 60, 146
Trotta, Amerigo ........................................................... 68
Truyts, Cláudio .......................................................... 130
Tsai, Du-Yih ............................................................... 101
Tsukiyama, Toshifumi ................................................. 34
Tuan, Chin-Fen.......................................................... 119
Tůmová, Olga.............................................................. 92
Turan, A. Izzet ............................................................. 99
Tysler, M. .................................................................. 121
Uchida, Yoshiyuki ........................................................ 89
Ueda, Kazunaga ...................................................72, 105
Ueda, Takeji ................................................................ 95
Uehane, Yoshiyuki ...................................................... 90
Ueno, Kenji ............................................................... 122
Ueno, Shigeru ........................................................... 134
Uher, Miroslav ............................................................ 62
Umeda, Norihiro ......................................................... 90
Urzędniczok, Henryk ................................................... 92
Usuda, Takashi .......................................................61, 88
Usuki, Shin .................................................................. 71
Uytun, Ali .................................................................. 131
Vacharanukul, Ketsaya.............................................. 153
Vadursi, Michele ......................................................... 45
Valcu, Adriana .....................................................90, 135
Valera, Benjamin ...................................................... 153
Vanderbemden, Philippe ............................................ 68
Vandermarlière, S. .................................................... 130
Vasco, Elsa ................................................................ 156
Vasconcellos, Renata Barros e ...............................60, 65
Vasconcelos, Flávio Henrique ..............................68, 132
Vasić, Darko ................................................................ 66
Vasilic, Violeta ............................................................ 37
Vata, Ion ..................................................................... 64
Vedral, Josef ..........................................................79, 89
Vehkaoja, Antti ......................................................... 102
Velez, Fernando ........................................................ 154
Veliki, Tomislav ......................................................... 127
Veltroni, Lorenzo ........................................................ 62
Velychko, Oleh .....................................................67, 100
Vendramin, Giuseppe ................................................. 68
Verho, Jarmo .............................................................. 82
Vesely, Jaroslav ........................................................... 92
Viegas, Vítor ............................................................... 40
Vieira, Hamilton ........................................................ 108
Viel, Wolfgang ............................................................ 86
Vieri, Simone ............................................................ 125
Vigo, Gabriele ............................................................. 87
Vilaça, Pedro ............................................................... 30
Viliesid-Alonso, Miguel ............................................. 101
Villanacci, Maurizio ..................................................... 59
Villar, José Daniel Figueroa ....................................... 138
Vitek, K. ...................................................................... 49
Vito, Luca De........................................................59, 126
Vlcek, Cestmir ............................................................. 64
Vlcek, J. ....................................................................... 49
Vogel, Michael ............................................................ 94
Vogtmann, Martin ...................................................... 36
Voigt, Andreas .......................................................... 130
Vojtisek, Lubomir ........................................................ 80
Volf, J. ......................................................................... 49
Vujicic, Vladimir .....................................................46, 84
167
Yanogawa, Kana ..................................................71, 132
Yoo, Yong Shim ....................................................97, 131
Yoshida, I. ................................................................... 54
Yoshida, Koji ............................................................. 119
Yoshida, Yohsuke ........................................................ 54
Yu, Kwang-Min ......................................................... 146
Yue, Zhang ...........................................................91, 105
Yurci, M. E. ............................................................... 142
Yurish, Sergey ............................................................. 66
Zagar, Bernhard .......................................................... 58
Zaharia, Valentin Dan ................................................. 31
Zainudin, Zuraidah ...................................................... 91
Zamora-Peredo, L. .................................................... 125
Zangl, Hubert .............................................................. 82
Zanobini, Andrea ........................................................ 73
Zappacosta, Carmine ................................................ 126
Zarco, Manuel........................................................... 127
Zaťko, B. ................................................................... 115
Żebrowska-Łucyk, Sabina ............................................ 82
Zeituni, Carlos ........................................................... 115
Zelenka, Zoltán ........................................................... 90
Zeng, Hongyang ........................................................ 135
Zenzeri, Jacopo ........................................................... 87
Zetterberg, Per ........................................................... 59
Zhang, Minghu ............................................. 31, 100, 153
Zhang, Wei ............................................................... 156
Zhang, Zhijie ............................................................. 135
Zheng, Alan ................................................................. 53
Zheng, Enhui ............................................................... 97
Zhimin, Zhang ........................................................... 105
Zhou, Yang ................................................................ 135
Zhu, Pingyu ..........................................................48, 135
Ziadé, F. .................................................................... 125
Zielinski, Krzysztof..................................................... 102
Zielinski, Marek......................................................... 140
Zielonko, Romuald ...............................................35, 140
Zoric, Igor ................................................................. 124
Zůda, Jaroslav ........................................................... 119
Župunski, Ivan........................................................46, 84
Žužek, Vincencij ........................................................ 131
Zvizdic, Davor ........................................................... 127
Zwierzchowski, Jarosław ............................................. 74
Wagner, Frank........................................................... 111
Wan, Rongrong ........................................................... 48
Wang, Daihua............................................................ 135
Wang, Jun ................................................................. 156
Wang, Wei ................................................................ 135
Wang, Wenlian.......................................................... 135
Warsza, Zygmunt Lech .............................................. 136
Watanabe, Masato .................................................... 151
Watanabe, Tsukasa ................................................... 103
Watral, Zbigniew ....................................................... 101
Weckenmann, Albert ............................. 46, 77, 109, 122
Weid, Jean Pierre von der ..................................... 89, 95
Weißensee, Holger ............................................ 109, 133
Wendt, K. .................................................................. 148
Werner, Andrzej ........................................................ 103
Werner, Teresa ........................................................... 77
Wieczorowski, Michal ............................................... 104
Wiesauer, Karin ........................................................... 35
Wijesinghe, W. M. S. ................................................. 124
Winiecki, Wiesław ........................................... 30, 31, 66
Woliński, Tomasz R. .................................................... 64
Woo, Sam Yong ........................................................... 90
Woo, Sam-Yong........................................................... 86
Wozniak, Adam ......................................................... 155
Wright, Paul .............................................................. 128
Wu, Chung-Lin........................................................... 119
Wu, Jian .................................................................... 130
Wübbeler, Gerd ........................................................ 140
Wyszkowski, Jacek ...................................................... 68
Xu, Hongwei .............................................................. 131
Yabushita, Shinji .................................................. 71, 132
Yadav, Poonam ........................................................... 91
Yamaguchi, Makoto .................................................. 134
Yamakawa, Yuji ........................................................... 51
Yamamoto, Kazuya .............................................. 71, 132
Yamamoto, Masayuki .................................................. 61
Yamamoto, Takashi ..................................................... 61
Yamamoto, Yasuhiro ................................................. 151
Yamasaki, Hiroshi ........................................................ 87
Yamazaki, Takanori ..................................................... 51
Yang, Feng-Yu ............................................................. 36
Yang, Inseok ...................................................... 127, 131
168

Dowloadable PDF version - IMEKO XIX World Congress, Lisbon

Transcrição

Documentos relacionados

List of Participants

Procedure Ammissione Politecnico di Torino

the wine list

bay filly (brz)

Cabernet Sauvignon Cabernet Based Blends

BRAZIL

Rene Nascimento resume 02 17 2013

List of Participants Session/ Contribution 1 Adamo, Angela IP

FERNANDA GOMES

fernanda gomes - Peter Kilchmann

1 XIII International Congress of Acarology

janaina tschäpe - Catherine Bastide

Laboratórios Credenciados