Personal guide for: Search Criteria:

Transcrição

glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Personal guide for:
EMail: Product category: glasstec.21 - Special shows and offers
Search Criteria:
•
•
•
•
•
•
•
•
Company Figures
Company Profile
Contact Persons
Exhibitors with address and hall location
Hall map for each exhibitor
News / Product News
Product groups with descriptions and illustrations
main_prod_no
Messe Düsseldorf GmbH
Postfach 101006
40001 Düsseldorf
Germany
Tel. +49 (0)221 / 45 60-01
Fax +49 (0)221 / 45 60-668
www.messe-duesseldorf.de
© 2010 Messe Düsseldorf GmbH
1
2
Contents
1 Exhibitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
ABRATECH S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
Adler S.A.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3
Avancis GmbH & Co. KG . . . . . . . . . . . . . . . . . . . . .
1.4
BBG GmbH & Co. KG . . . . . . . . . . . . . . . . . . . . . .
1.5
Centrosolar Glas GmbH & Co. KG . . . . . . . . . . . . . . .
1.6
Consystec GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
1.7
DIAS Infrared GmbH . . . . . . . . . . . . . . . . . . . . . . .
1.8
EControl-Glas GmbH & Co. KG . . . . . . . . . . . . . . . . .
1.9
Edgetech Europe GmbH . . . . . . . . . . . . . . . . . . . . .
1.10 Fotoverbundglas Marl GmbH . . . . . . . . . . . . . . . . . . .
1.11 Fraunhofer-Gesellschaft . . . . . . . . . . . . . . . . . . . . .
1.12 General Solar Systems Deutschland GmbH SONNENKRAFT
1.13 glas platz gmbH & co. kg . . . . . . . . . . . . . . . . . . . . .
1.14 Glas Trösch Holding AG . . . . . . . . . . . . . . . . . . . . .
1.15 Glaswerke Arnold GmbH & Co. KG . . . . . . . . . . . . . . .
1.16 Grenzebach Maschinenbau GmbH . . . . . . . . . . . . . . .
1.17 Grenzebach Maschinenbau GmbH . . . . . . . . . . . . . . .
1.18 Henze-Glas GmbH . . . . . . . . . . . . . . . . . . . . . . . .
1.19 Intermac Glass and Stone Division . . . . . . . . . . . . . . .
1.20 isophon glas GmbH . . . . . . . . . . . . . . . . . . . . . . . .
1.21 Kuraray Europe GmbH, Division TROSIFOL . . . . . . . . . .
1.22 Logistic System Pichler GmbH . . . . . . . . . . . . . . . . . .
1.23 Nirvana Technologies (P) Ltd. . . . . . . . . . . . . . . . . . .
1.24 North Western Lead (Hyde) Ltd . . . . . . . . . . . . . . . . .
1.25 Q-railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.26 ROBIN SUN . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.27 SAINT-GOBAIN GLASS Deutschland GmbH . . . . . . . . . .
1.28 Shanghai Pony Technology Co., Ltd. . . . . . . . . . . . . . .
1.29 SMT Lager- und Transportsysteme GmbH . . . . . . . . . . .
1.30 Talamoni s.n.c. . . . . . . . . . . . . . . . . . . . . . . . . . .
1.31 Tekimex International A.p.s. . . . . . . . . . . . . . . . . . . .
1.32 Willwin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.33 Xavannah dataprocessed engineering, Henner Hucker & Denis Schmischke GbR . . . . . . . . . . . . . . . . . . . . . . .
2 Fairground Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Hall Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Hall 09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Hall 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
7
8
11
12
15
16
21
24
25
32
32
34
37
38
44
51
52
55
58
64
66
68
69
71
72
77
78
78
80
81
3.3
3.4
3.5
3.6
3.7
3.8
3.9
Hall 11
Hall 12
Hall 13
Hall 14
Hall 15
Hall 16
Hall 17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
94
96
98
100
102
104
106
82
88
90
90
92
3
4
Exhibitors
Adler S.A.S.
Address
Via dell´Artigianato, 2/A
61020 Montecchio / PU
Italy
9, Avenue des 22 Arpents
77230 Moussy-le-Neuf
France
Phone
+33 1 60036200
Phone
+39 0721 472547
Fax
+33 1 60036249
Fax
+39 0721 907413
Internet address
www.adler-sa.fr
Internet address
www.abratech.it
E-Mail
[email protected]
E-Mail
[email protected]
Stand
Hall 10, F27 (Page 92)
Stand
Hall 15, G41 (Page 102)
ABRATECH S.r.l.
Address
Company News
09/02/2010
Product Overview
ABRATECH S.r.l.
glasstec.02.11.01
Tools
glasstec.21.02
Special offers for glass trade / crafts
Product Details
glasstec.21.02
ABRATECH S.r.l.
Polishing wheels
TOP line wheels for the polishing of the edge of the glass assuring an elevated
qualitative standard in terms of polishing and finish.
5
Adler S.A.S.
SECURITRACK
SECURITRACK® is the latest attractively-priced range
of multi-purpose display case sliding track (lift-off, 15°
angle-adjustable, for 5 to 8.8 mm doors, even heavy
doors,…), supplied in 1m45 kits for quick despatch. It
enables easy and very ergonomic installation of a DISPLAYLOCKS electromagnetic locking system®.
09/02/2010
PRESTIGE REVERSI
Reversi Prestige adjustable door closers are the ideal
solution for installations (shower stalls, display cases,
gates...) When transparency, clarity and reliability is required. the 100% metal miniaturised mechanism ensures an extremely accurate and powerful return action,
even on very heavy doors.
6
09/02/2010
ADLOCL HANDLES
Avancis GmbH & Co. KG
TECHNICAL DETAILS:
Address
Solarstr. 3
04860 Torgau
Germany
Phone
+49 3421 7388-0
Fax
+49 3421 7388-111
Internet address
www.avancis.de
- Single or double tubular handle versions.
- All heights, 25 to 45 mm diameter.
- One or two closure points.
The mechanism® is ideal for all types of operating applications: internal or external locks, external lock and
internal knob, internal and external knobs, possibility or otherwise of inserting the
external key when the internal key is in place. For a range of tubular handles
between 25 mm and 45 mm diameter.
A complete range of tubular door handles in brushed or polished stainless steel,
in shiny, natural or coloured anodised aluminium, or even in chromed or gilt
brass. Supplied as standard with KESO cylinder locks. Automobile type locks
and European cylinder locks on request.
These door handles are an aesthetically-pleasing, ergonomic and perfect solution for shop and office security.
E-Mail
Stand
Product Overview
glasstec.21.01
Product Overview
glass technology live
Adler S.A.S.
Product Details
glasstec.03.10.01.01.02Glass door systems
glasstec.21.01
glasstec.21.03
Hall 11, B26 (Page 94)
Special offers for architects
CIS Technology
CIS steht für die Elemente Copper (Cu), Indium (In), Selenium (Se), zu Deutsch:
Kupfer, Indium, Selen. In Beschichtungsverfahren, die der Glasproduktion entlehnt
sind, werden diese bei AVANCIS zu einem Schichtaufbau von ca. 2 µm aufgebracht. Sprich: Zwei tausendstel Millimeter reichen aus, um das Sonnenlicht zu
absorbieren. Eine überragende Performance, die ihresgleichen sucht.
7
8
by Koramic company and, for the first time, the integral ”detiga” roof system,
which is also installed directly on the roof structure. It consists of matching elements of energy-producing and purely insulating components, which together
form an integrated end-to-end outer layer. The program comprises the active
”solar thermal energy” and ”photovoltaics” modules and the passive ”insulation”
component for all other roof areas.
BBG GmbH & Co. KG
Address
Helmenegger Weg 12
87719 Mindelheim
Germany
Phone
+49 8261 7633-0
Fax
+49 8261 7633-0
Internet address
www.bbg-mbh.com
E-Mail
[email protected]
Stand
Company News
07/25/2010
”Solar-PUR-Flush” technology maximises yield
The polyurethane specialist exclusively displays solar thermal energy, photovoltaics and combination modules with polyurethane (PUR) frames and fastening elements. The Solar-PUR-Flush technology developed by BBG allows for
encapsulating inserts, joints and electronic components in plastic frames, thus
protecting them against any mechanical damage and corrosion. The awardwinning ”edgeless technology” provides for a smooth transition between the
frame and the module without creating the edges in which dirt accumulates,
thus maximising energy yield.
TopTherm 90, the ultra-energy saving and slender standard window
BBG GmbH & Co. KG
BBG manufactures installations for the production of
innovative solutions for the solar and window
industries
Presentations on innovative solutions
Mindelheim, July 21st, 2010. BBG GmbH & Co. KG will
be present at the first solarpec trade show for solar production engineering and the glasstec trade show, which takes
place in parallel, and will demonstrate various innovations
on how to join glass and plastics. The engineering company,
which manufactures installations for the production of innovative solutions for the solar and window industries, is part
of the glass-technology-life special show at glasstec hall 11
and can also be found with their product presentation at the solarpeq trade show
in hall 14, stand E62.
Partner for innovative polyurethane-based solutions
The solution provider and partner of the solar, photovoltaics and window industries, BBG is involved in the development and production of innovative frame
modules made of polyurethane, the manufacturing of tools, prototypes and endto-end production lines. The company showcases a large number of applications at the trade show, including solar thermal energy, photovoltaics and hybrid elements made by various manufacturers for retrofits, photovoltaic shingles
With TopTherm 90, the company showcases the world’s first ultra-energy saving
standard window with a frame and a profile core made of PUR. With a depth of
only 90 mm and triple glazing, the window achieves a heat insulation value of
0.8 W/m²K. The production technologies for system bar profiles were developed
by BBG and are available for use in new innovative windows.
9
Within the framework of the ”glass technology live” special show, BBG representatives will give two presentations to prospective customers in order to provide
detailed insight into the innovations developed by BBG. Project manager Gerhard Hörtrich will be talking about ”Efficient production technologies for window
systems made of polyurethane” while Hans Brandner, BBG’s managing partner,
will be focussing on ”Technologies for flexible PUR frames in solar modules, using passive and active roof modules as an example”.
BBG’s customers are active the world over
BBG GmbH & Co. KG, a manufacturer of moulds, machinery and plants, is
a renowned specialist for the polyurethane-processing industry. BBG supply
their products to their customers all over the world. The export content was c.
45 percent in 2009, with the Asian market playing an important role. In 2009,
the family-owned business, which is located in Mindelheim/Allgäu and is run by
Hans Brandner, the managing partner, generated sales of around 7.1m Euros.
The headcount of both the Mindelheim headquarters and the subsidiary located
at the Changchun/China totals 65.
10
Centrosolar Glas GmbH & Co. KG
Product Overview
BBG GmbH & Co. KG
Address
Siemensstr. 3
90766 Fürth
Germany
Phone
+49 911 95098-0
Fax
+49 911 95098-519
Auch bei der Entwicklung und dem Bau von Schäumwerkzeugen sind wir stets auf Ihren Vorteil bedacht. Deshalb setzen
wir gerne all unser Wissen und unsere langjährige Erfahrung
im Umgang mit den PUR Komponenten ein, um gemeinsam mit unserem Kunden das für seine Anwendung optimale
Schäumwerkzeugkonzept umzusetzen.
Internet address
www.centrosolarglas.com
E-Mail
[email protected]
Stand
BBG Schäumwerkzeuge werden in der Automobilindustrie unter anderem eingesetzt zum Herstellen oder Veredeln von:
Product Overview
glasstec.21.01
Product Details
glasstec.21.01
BBG GmbH & Co. KG
Schäumwerkzeuge
glasstec.21.01
Glassdachelementen Windschutzscheiben Seitenscheiben Heckscheiben Heckscheibenklappen Verglasungen in Cabrio Stoffverdecken Cabrio Dämmverdecken
Product Details
glasstec.21.01
CENTROSOL Solargläse
Floatgläser
Strukturgläser
Floatgläser mit AR-Schicht
Strukturgläser mit AR-Schicht
Unsere CENTROSOL Solargläser sind eisenarme Gläser mit sehr hohen Transmissionseigenschaften und sehr niedrigen Reflexionswerten. Es gibt sie als
beidseitig glattes Floatglas clear in drei unterschiedlichen Transmissionsstufen
CST, C und C+ und als mikrostrukturiertes Gussglas in den zwei verschiedenen
Oberflächenvarianten MM und SM.
11
12
Consystec GmbH
Product Overview
Address
Industriestr. 80
40764 Langenfeld
Germany
Phone
+49-2173-27586-10
Fax
+49-2173-27586-39
Internet address
www.consystec.de
E-Mail
[email protected]
Stand
Hall 11, E05 (Page 94)
Company News
06/10/2010
Consystec GmbH
glasstec.02.07.02
Components and accessories for display glass
technology
glasstec.02.11.05
Spacers
glasstec.03.01.01
Float and mirror glass
glasstec.03.02.01
Tempered glass
glasstec.03.02.06
Display glass
glasstec.03.02.09
Curved glass
glasstec.03.07.01.01
Balcony glazing
glasstec.03.07.12
Worked flat glass (general)
Consystec GmbH
competence in glass+stainless steel
first-time exhibitor at glasstec 2010. Production and distribution of float glass, tempered glass, various stainless
steel fittings for glass plates, totems, pylons, partition walls,
glass shelfes fixed on wires, mirrors, store and counter constructions, splash guards, discretion walls, UV-glued glass
brochure holder and glass document storer.
glasstec.03.10.01.01.01Specialist construction (shower partition walls)
glasstec.03.10.01.01.03Ballustrades
glasstec.03.10.01.01.06Brackets and fittings
glasstec.03.10.02.04.04Other functional fittings and brackets
13
Glass tables and furniture
Glass display cases and shelves
Parting walls in glass
glasstec.03.13.02
Panelling
14
glasstec.03.13.04
Shower cabinets
glasstec.03.13.07
Mirrors
glasstec.04.09
Brackets for glass applications
glasstec.21.02
glasstec.21.03
interface, even during the current production processes that share.
By default DSF 34NG is equipped with the industrial interface RS 485. This
allows several pyrometer connected easily with the help of a bus system and is
for new installations with a larger number of pyrometers or for integration into
existing bus systems with other measurement tools suitable.
Both types have a test current output, and a maintenance-resolution optics with
solid stainless steel accessories and are compatible with the installed instruments.
This meter has ”everything”, what you need for this glass temperature measurement. In product development engineers have worked closely with the glass
industry.
DIAS Infrared GmbH
Address
Product Overview
Gostritzer Str. 65
01217 Dresden
Germany
DIAS Infrared GmbH
Measurement and control of radiation in the melt
Measurement and control of glass temperature
Surface, contour and imperfection measurement and
control
Phone
+49 351 871-7228
Fax
+49 351 871-7230
Internet address
www.dias-infrared.de
glasstec.21.02
E-Mail
[email protected]
glasstec.21.03
Stand
Hall 12, C25 (Page 96)
Company News
09/07/2010
DIAS Infrared GmbH
DSF 30NG/34NG - Pyrometer for the glass industry
Especially for the non-contact temperature measurement of molten glass in glass basins, forehearths and
feeders, the series DSF 30 and DSF 34 were developed. With the type DSF 30 NG the proven and already widely used analog two-wire system has been implemented. The desired
parameter adjustment can be done on demand via a galvanically isolated USB
15
16
Büroarchitektur. „Überall ist ein Maximum an Tageslicht erwünscht. Paradoxerweise wird wegen der Überhitzungsgefahr von Räumen aber genau dann verschattet, wenn die Sonne am schönsten und intensivsten Licht spendet – nämlich im Sommer. Dann schalten Hausbesitzer und Büroangestellte im Inneren
die elektrische Beleuchtung an. Mit schaltbarem EControl Sonnenschutzglas
gelangt weiterhin viel Licht in die Räume, es reduziert die Blendung spürbar
und die Hitze bleibt draußen. Per Handschalter oder auch über eine automatische Steuerung werden die Scheiben individuell geregelt“, erläutert Dr. Wittkopf.
EControl-Glas GmbH & Co. KG
Address
Otto-Erbert-Str. 8
08527 Plauen
Germany
Phone
+49 3741 14820-0
Fax
+49 3741 14820-150
Internet address
www.econtrol-glas.de
E-Mail
[email protected]
Stand
Hall 10, H36 (Page 92)
Company News
16.08.2010
Nanobeschichtung reagiert auf Spannungsveränderungen
Das variable Sonnenschutzglas besteht aus einer „Sandwichscheibe“ mit innen liegender nanostrukturierter Beschichtung. Wird eine geringe Spannung
angelegt (3 Volt), färbt sich die Beschichtung durch den so genannten elektrochromen Effekt geräuschlos in ein angenehmes Blau ein. Dann lässt das Glas
– je nach Intensität der „Abblendung“ – nur noch zwischen 38 und 12 Prozent
der Sonnenenergie in den Raum. Vom Tageslicht gelangen zwischen 50 und
15 Prozent ins Innere. An heißen Sommertagen kann sich die Außenscheibe
auf bis zu 70 Grad Celsius erhitzen – die Innenscheibe bleibt jedoch bei voller
Einfärbung mit 25 bis 30 Grad Celsius verhältnismäßig kühl.
Elektrochrome Beschichtungen der neuen Generation
EControl auf der glasstec 2010
Schaltbares Sonnenschutzglas gegen Überhitzung und
Blendung
Die moderne Hightech-Alternative zu Jalousien und
Rollläden ist „EControl“: Das schaltbare Sonnenschutzglas lässt sich auf Knopfdruck in fein justierten Stufen
elektrochrom „abdunkeln“. So wird der Licht- und Wärmedurch¬gang individuell
regelbar – je nach Jahreszeit und Wetterlage – und auf eine außen liegende
Verschattung kann verzichtet werden. Das innovative Produkt ist in Bürogebäuden ebenso einsetzbar wie in Wohnbauten oder als Überkopfverglasung, denn
es wird in handelsüblichen Rahmenprofilen verbaut. Auf der glasstec 2010 in
Düsseldorf (Halle 10: Stand H36) präsentiert die EControl Glas GmbH & Co KG
vom 28. September bis zum 1. Oktober 2010 seine intelligenten Produkte für
Sonnen- und Blendschutz.
Positiver Effekt: Gesundheit und Wohlbefinden
Das Glas bietet im dunklen Zustand einen UV-Schutz von 99,5 Prozent. Denn
was wenige wissen: Herkömmliches Fensterglas hält zwar einen erheblichen
Teil der Sonnenbrand verursachenden UVB-Strahlen ab, ist aber für langwellige
UVA-Strahlen, die z.B. Falten und Altersflecken hervorrufen können, weitestgehend durchlässig.
Dagegen bleibt der für Menschen und Pflanzen wichtige „Blaulichtanteil“ erhalten – er fördert die Vitalität und ist ein wichtiger Faktor für Pflanzenwachstum.
Aufgrund seiner guten Abschirmwirkung wird durch EControl auch ein guter
Schutz vor externem Elektrosmog gewährleistet.
EControl-Glas ist standardmäßig mit einer hochwertigen Wärmeschutzbeschichtung ausgestattet und kann auch als modernes Dreifach-Isolierglas ausgeführt
werden – dann isoliert es mit einem Ug-Wert von bis zu 0,5 W/m2K erstklassig gegen Heizwärmeverluste. Die maximale Scheibengröße von 125 x 240 cm
wird Anfang 2011 auf 130 x 300 cm erhöht.
Weitere Informationen im Internet unter www.econtrol-glas.de.
Glas ist heute ein multifunktionaler Baustoff: Schaltbare Sonnenschutzverglasung mit elektrochromer Beschichtung passt sich z.B. auf Knopfdruck individuell an die Tages- und Jahreszeit an. Entwickelt wurde sie speziell für
modernes Wohnen mit großen Glasflächen in der Fassade sowie für moderne
17
18
Product Overview
glasstec.03.02.03
Insulating glass
Sun protection glass
Systems for sun and glare protection
glasstec.21.01
glasstec.21.02
glasstec.21.03
Product Details
glasstec.21.02
Der Grundaufbau der verdunkelbaren Glasscheiben entspricht dem herkömmlicher Sonnenschutzgläser. Der Vorteil: Das elektrochrome Glas kann gleichzeitig als Wärmeschutzglas, Sicherheitsglas und auch als Dreifach-Isolierglas
kombiniert werden bis hin zum Einsatz als Passivhausverglasung.
Über ein Steuergerät lassen sich bis zu 30 schaltbare Glasscheiben mit einem
Knopfdruck in fünf Stufen nach den jeweiligen Lichtverhältnissen und persönlichen Bedürfnissen regeln. Der Benutzer hat also bei den elektrochromen
Gläsern, anders als bei selbsttönenden Scheiben oder phototropen Gläsern,
die Möglichkeit, sein Wohlbefinden selbst zu steuern. Hierbei spielt natürlich
auch der Verzicht auf mechanische Sonnenschutzsysteme und Markisen eine
spürbare Rolle.
Wird die Elektronik an das Bussystem der Gebäudeleittechnik angeschlossen,
ist sogar eine stufenlose Steuerung möglich - Ein weiteres Plus: Der Prozess
der Einfärbung der schaltbaren Fenster verläuft lautlos und fließend und entzieht
sich so der Aufmerksamkeit der Raumnutzer. Unser elektrisch steuerbares Glas
eignet sich damit nicht nur als innovatives Glas für energiesparendes Bauen,
sondern auch besonders für Dachverglasungen, z. B. in Atrien oder als Wintergartenglas.
EControl ist natürlich auch im Hinblick auf nachhaltiges Bauen und green building Standards eine ideale Komponente als nachhaltige Gebäudeverglasung.
EControl - Die Sonnenbrille fürs Gebäude
Mit unserem schaltbaren Sonnenschutzglas lassen sich
Lichtdurchlässigkeit und Wärmeeintrag elektronisch steuern.
EControl ist also kein selbsttönendes Glas oder selbsteinfärbendes Glas, es bedarf zur Einfärbung eines elektrischen Impulses.
Damit ist EControl ein ideales steuerbares Sonnenschutzglas für Fenster, Wintergarten, Atrium und Glasdach.
Seit 2007 produzieren wir unsere schaltbaren Scheiben und haben zwischen
zeitlich in Plauen im Vogtland unser neues Domizil für die industrielle Herstellung
dieser innovativen Verglasung bezogen. Natürlich haben wir auch unser neues
Gebäude mit schaltbaren Fensterscheiben ausgestattet.
Das variable Sonnenschutzglas besteht aus einer Sandwichscheibe, welche
den so genannten elektrochromen Effekt nutzt: Durch eine nanostrukturierte
Glasbeschichtung lässt sich das elektrochrome Glas bei Sonnenschein nach
Bedarf blau einfärben. Wenn eine elektrische Spannung angelegt wird, so reduzieren sich die Lichtdurchlässigkeit und damit der Wärmeeintrag. Viel Strom
braucht es dazu nicht. Wird der Zustand geändert, reichen schon drei Volt aus,
um den Ionenaustausch zu aktivieren. Unsere variable Verglasung wird quasi
somit zum Schattenglas. Auf außen liegenden mechanischen Sonnenschutz
wie Rollos oder Markisen kann verzichtet werden.
19
glasstec.21.03
EControl - Die Sonnenbrille fürs Gebäude
Mit unserem schaltbaren Sonnenschutzglas lassen sich
Lichtdurchlässigkeit und Wärmeeintrag elektronisch steuern.
EControl ist also kein selbsttönendes Glas oder selbsteinfärbendes Glas, es bedarf zur Einfärbung eines
elektrischen Impulses. Damit ist EControl ein ideales
steuerbares Sonnenschutzglas für Fenster, Wintergarten, Atrium und Glasdach.
Seit 2007 produzieren wir unsere schaltbaren Scheiben und haben zwischen
zeitlich in Plauen im Vogtland unser neues Domizil für die industrielle Herstellung
dieser innovativen Verglasung bezogen. Natürlich haben wir auch unser neues
Gebäude mit schaltbaren Fensterscheiben ausgestattet.
Das variable Sonnenschutzglas besteht aus einer Sandwichscheibe, welche
den so genannten elektrochromen Effekt nutzt: Durch eine nanostrukturierte
Glasbeschichtung lässt sich das elektrochrome Glas bei Sonnenschein nach
Bedarf blau einfärben. Wenn eine elektrische Spannung angelegt wird, so reduzieren sich die Lichtdurchlässigkeit und damit der Wärmeeintrag. Viel Strom
braucht es dazu nicht. Wird der Zustand geändert, reichen schon drei Volt aus,
20
um den Ionenaustausch zu aktivieren. Unsere variable Verglasung wird quasi
somit zum Schattenglas. Auf außen liegenden mechanischen Sonnenschutz
wie Rollos oder Markisen kann verzichtet werden.
Der Grundaufbau der verdunkelbaren Glasscheiben entspricht dem herkömmlicher Sonnenschutzgläser. Der Vorteil: Das elektrochrome Glas kann gleichzeitig als Wärmeschutzglas, Sicherheitsglas und auch als Dreifach-Isolierglas
kombiniert werden bis hin zum Einsatz als Passivhausverglasung.
Über ein Steuergerät lassen sich bis zu 30 schaltbare Glasscheiben mit einem
Knopfdruck in fünf Stufen nach den jeweiligen Lichtverhältnissen und persönlichen Bedürfnissen regeln. Der Benutzer hat also bei den elektrochromen
Gläsern, anders als bei selbsttönenden Scheiben oder phototropen Gläsern,
die Möglichkeit, sein Wohlbefinden selbst zu steuern. Hierbei spielt natürlich
auch der Verzicht auf mechanische Sonnenschutzsysteme und Markisen eine
spürbare Rolle.
Wird die Elektronik an das Bussystem der Gebäudeleittechnik angeschlossen,
ist sogar eine stufenlose Steuerung möglich - Ein weiteres Plus: Der Prozess
der Einfärbung der schaltbaren Fenster verläuft lautlos und fließend und entzieht
sich so der Aufmerksamkeit der Raumnutzer. Unser elektrisch steuerbares Glas
eignet sich damit nicht nur als innovatives Glas für energiesparendes Bauen,
sondern auch besonders für Dachverglasungen, z. B. in Atrien oder als Wintergartenglas.
EControl ist natürlich auch im Hinblick auf nachhaltiges Bauen und green building Standards eine ideale Komponente als nachhaltige Gebäudeverglasung.
Edgetech Europe GmbH
Address
Erftstr. 22-24
41460 Neuss
Germany
Phone
+49 2131 17636-0
Fax
+49 2131 17636-29
Internet address
www.superspacer.com
E-Mail
[email protected]
Stand
Hall 17, B68 (Page 106)
Company News
07/14/2010
Edgetech Puts You in Pole Position
Edgetech Putting Customers In Pole ”>
Edgetech Europe GmbH, leading manufacturer of Super Spacer® warm edge
technology, announces its big plans for glasstec 2010. Adopting the theme of
Formula 1 racing, visitors to the Stand B68 in HALL 17 will be able to take the
Edgetech Pole every day of the show.
Johannes von Wenserski, Head of Operations and Marketing Manager for Edgetech in Europe explains: “A regular exhibitor at glasstec, we wanted to do
something really special to celebrate the record breaking sales we’ve enjoyed
over the last year. The theme of Formula 1 fits perfectly with our business – it’s
about being the best at what you do in terms of engineering, productivity and
innovation.”
“Modelled on a large sealed unit, the streamlined stand is divided into zones depending on visitor interest. We’ll have the productivity pit-stop which will show
in detail our solutions for manufacturing the most thermally efficient double and
triple glazed IGUs in the most cost effective way, whether using manual, semior fully automated solutions. To learn more about the range of spacers we have
available, visitors can talk to the team and see what’s on offer in our Product
21
22
Pit-Stop. For those interested in the structural integrity and proven performance
of our Super Spacer® and Super Spacer® TriSealTM products, we are planning
a simulated interactive hurricane test live on the stand. Marketing and business support is an area that customers tell us differentiates Edgetech from other
spacer suppliers, so we’ll be show casing the full range of business to business
and business to consumer materials available in 11 different languages, including sample cards, a consumer DVD and tailor made brochures.
“It’s always good to have something fun on an exhibition stand too, and any visitors to the show who fancy themselves as Jenson Button can shows their skills
in our competition. Fastest laps on our F1 simulator will be awarded a selection
of prizes announced at the end of each day. So whether you’re looking to find
out how to improve your productivity by switching to Super Spacer®, increase
the energy efficiency of your units, enjoy award winning marketing support, or
simply test your driving skills, be sure to visit Edgetech where you’ll be made to
feel very welcome.”
For more information, call +49 2131 176360 or visit www.superspacer.com
Product Overview
Measurement, control and inspection of gas-filling
levels
glasstec.21.02
glasstec.21.03
Fotoverbundglas Marl GmbH
Address
Zechenstr. 7C
45772 Marl
Germany
Phone
+49 2365 3173
Fax
+49 2365 36355
Internet address
www.fotoverbundglas.de
E-Mail
[email protected]
Stand
Hall 11, G81 (Page 94)
glasstec.02.11.05
Spacers
glasstec.03.02.03
Insulating glass
Fireproof glass
Heat insulation glass
Company News
glasstec.03.02.09
Curved glass
07/14/2010
Structural-sealant-glazing facades
FOTOVERBUNDGLAS IS AN ACCREDITED
SAFTYGLAS MADE IN GERMANY
glasstec.03.08.01
Structural use of glass
FotoVerbundGlas
LAMINATED
STRUCTURAL GLAZING FOR IN- AND OUTDOOR
WE CAN MAKE FOR YOU A PICTURE PROPOSAL OR YOU
CAN CHOICE A MOTIVE FOR YOUR OWN: THAN WE BUILD
FOR YOU YOUR INDIVIDUAL ”WORK OF ART”
23
24
Company News
Product Overview
Fraunhofer-Gesellschaft
Laminated glass technology with foil for architectural
glass
glasstec.21.02
glasstec.21.03
Address
Hansastr. 27c
80686 München
Germany
Phone
+49 89 1205-0
Fax
+49 89 1205-7513
Internet address
www.fraunhofer.de
E-Mail
[email protected]
Stand
Hall 14, C41 (Page 100)
25
09/16/2010
Playing snooker with atoms
Scientists speak of sputtering when energy-rich ions hit
a solid object and cause atoms to be released from its
surface. The phenomenon can be exploited to apply microscopically thin coatings to glass surfaces. A research
team has developed a special sputtering technique that
greatly increases the effi - ciency of the coating process.
The new module for a sputtering plant will be shown at
the Glasstec 2010 trade fair in Düsseldorf from September 28 to October 1 (Hall 14, Booth C41). Designed to be
the most spectacular concert hall in Germany, the construction of the Elbe Philharmonic Hall in Hamburg is a controversial project, but it is already creating a
sensation in the architectural world. Nobody has ever tried to build windows this
high, each one fi ve meters tall, of unique dimensions, and glazed with multifunctional insulating glass. The demands on the architectural glass used in modern
structures like this are increasing all the time. Quite apart from their large surface
area, they also have to offer outstanding optical characteristics and at the same
time a high quality of thermal and sound insulation. These qualities depend to a
large extent on their surface coating. And this has become a costly challenge.
Researchers at the Fraunhofer Institute for Thin Film and Surface Technology
IST in Braunschweig have developed a new module for a sputtering plant that
signifi cantly increases the effi ciency of the coating process. Sputtering is the
preferred process for coating large surfaces. The process leads to an bombardment of a chosen material (target) and causes its constituent atoms to be ejected
like billiard balls by the impact of the energy-rich ions – generally noble-gas ions.
The latter subsequently condense on the surface of the glass or other substrate
to form a thin fi lm with specifi c properties depending on the characteristics
of the starting material. Different designs are possible for the coating module.
The version that consists of two rotating tubes containing strong magnets is referred to as a double magnetron. The magnets increase the sputtering rate, but
severely limit the options available to the design engineers: »We can only sputter materials for which targets are available and can be produced,« explains IST
department head Dr. Bernd Szyszka. »Moreover, the sputtering process we
have been using up to now is ineffi cient, because only a fraction of the bombarding ions actually contribute to the sputtering effect. More than 95 percent
of their energy is lost in the water-cooling system.« The IST experts have overcome this obstacle by placing an additional fl at target made of a heavy element
such as bismuth behind each target tube. »This signifi cantly increases the sputtering rate,« says Szyszka. The ionized noble gas causes bismuth atoms to be
26
released from the fl at solid body. These atoms are gradually »implanted«, as
the experts say, in the tube target. As the researcher confi rms, »The bismuth
has enabled us, for example, to signifi cantly improve the deposition of titanium
dioxide.« The quantity of coating material removed from the target is increased.
The IST researchers have meanwhile scaled up this effect to industrial level.
»Using a simulation program, we were able to optimize the sputtering process
in terms of material deposition on the fl at and tube targets, even before we had
built the new prototype model. We are now able to combine the target materials
in any way we desire, without causing unwanted chemical reactions on the surface.« The result is a higher deposition rate and a more homogenous surface
coating based on new materials that previously could not be produced. It also
takes less time to produce the coating, reducing the energy consumption. »The
new coating technology has allowed us to replace three old magnetrons with
two new ones. The system is much cheaper to operate and produces materials
with improved properties,« says Szyszka. The researchers will be present at the
Glasstec fair in Düsseldorf from September 28 to October 1, presenting a wide
range of applications from panoramic car roofs that provide thermal insulation to
photovoltaic cells with improved effi ciency. »This is the start of a new revolution
in large-area coatings,« promises the scientist.
For further information: Dr. Bernd Szyszka l Phone +49 531 2155-641 l
[email protected] Fraunhofer Institute for Surface Engineering
and Thin Films IST, Braunschweig l www.ist.fraunhofer.de Editorial Notes: Franz
Miller l Fraunhofer-Gesellschaft, München l Press Offi ce l Phone +49 89 12051333 l [email protected] Picture: The new coating module enables IST
researchers to produce previously unattainable combinations of materials. (©
Fraunhofer IST) Picture in color and printing quality: www.fraunhofer.de/press
09/16/2010
Glass magic – a film that changes what glass can do
Fogged or frozen windows are the bane of drivers‘ lives
in winter. Researchers have developed a process that
allows them to manufacture not just transparent, but
heatable films. These films also prevent condensation, ensuring ice cannot build up on the windscreen
overnight – and, once and for all, consigning the ice
scraper to the trash can. A prototype of this kind of film can be seen at the
glasstec trade fair due to be held in Düsseldorf from September 28 to October
1. Drivers do not relish the winter: it is cold, driving on icy roads is no fun. Added
to which is poor visibility if the windows mist up, and the laborious morning ritual
of having to scrape off the ice. Likewise, the winter poses its own problems for
anyone with a greenhouse. The more condensation you have inside, the greater
the threat to plants if the temperature falls below freezing. While heaters may be
27
a solution in many cases, a better option – especially concering energy costs –
would be to ensure the problem does not arise in the fi rst place. And that means
preventing condensation on windows. All of which would save a great deal of
hassle – and car owners can save the time they once spent scraping off the ice.
Researchers at the Fraunhofer Institute for Surface Engineering and Thin Films
IST in Braunschweig have now solved the problem by developing a process that
can be used to manufacture transparent, conductive – and therefore heatable
– films. Moreover, their surface films also provide another decisive advantage:
the low emitting properties of the outer film ensure the window cools down much
more slowly, preventing condensation. The window remains dry and ice-free.
Films that up to now have been produced with tin oxide are both mechanically
and optically still far from ideal. Cracks may form as a result of excessive temperature loads – a problem encountered during the glass bending process. As
a result, tin-oxide fi lms only have limited industrial applications. „Our new fi lm
is extremely resilient“, says Dr. Bernd Szyszka from the Fraunhofer IST. „Temperatures up to 900 degrees Celsius are no problem, and even if you bend it
aggressively – the fi lm remains intact.“ The coating can therefore also be used
in large industrial plants where transparent protective heaters are often required
to monitor the process chain safely. What can the new film do that tin oxide cannot? „Our coating system is based on nanocrystalline indium tin oxide (ITO)“,
says Szyszka. „This material doesn’t just have outstanding optical and electrical
properties; it is also mechanically and chemically much more stable than tin oxide.“ While the advantages of the ITO coating have been known for many years,
it is only now – thanks to the Fraunhofer engineers – that these kinds of fi lm
systems can be manufactured industrially for a much larger range of applications. The researchers are utilizing High Power Impulse Magnetron Sputtering
technology, or HIPIMS. With magnetron sputtering, accelerated noble-gas ions
shoot atoms from an ITO plate, much like what happens with billiard balls. These
atoms are deposited on the required substrate in vacuum. „Yet instead of 10 amperes we use 1000 amperes with HIPIMS“, explains Szyszka. „We ionize the
sputtered material; therefore the film is build up by higher energetic particles
and shows superior properties.“ All of which provide the engineers with a major
advantage: depending on the pulse and power conditions during sputtering, the
engineers can adjust the texture and morphology of the fi lm so that it subsequently takes on the desired properties during a subsequent tempering process.
„We can then bend the fi lm and even coat three-dimensional materials with the
technology“, says the researcher. The HIPIMS process can also be conducted
at room temperature, so that even temperature-sensitive plastics can be coated.
The Fraunhofer IST researchers will be showcasing a prototype at glasstec (Hall
14, Booth C 41), due to be held in Düsseldorf from September 28 to October 1.
An ITO fi lm on a glass tube demonstrates the outstanding properties achieved.
Not only is the fi lm easy to heat – without any of the annoying wires commonly
28
found in a rearheated window – the film boasts an optical transmission ratio of
over 80 percent. The coating is also corrosion- and scratch-resistant. It can
even provide scratch protection for float glass, a special type of flat glass.
For further information: Dr. Bernd Szyszka l Phone +49 531 2155-641 l
[email protected] Fraunhofer Institute for Surface Engineering
and Thin Films IST, Braunschweig l www.ist.fraunhofer.de Editorial Notes: Franz
Miller l Fraunhofer-Gesellschaft, München l Press Offi ce l Phone +49 89 12051333 l [email protected]
Picture: A transparent heatable film made out of indium tin oxide surrounds this
glass tube used by BASF. (© Fraunhofer IST) Picture in color and printing quality:
www.fraunhofer.de/press
09/16/2010
Glass biochips for medical engineering:
resource-friendly, cost-effective and high-quality
Variation of complex geometries for prototypes The Jülich research center is delighted with the ISLE process, particularly for producing prototypes and short-run
manufacturing: The researchers there often need just a single component sample to determine the best channel design within a biochip for medical purposes.
In the past, a mask had to be produced specifically to manufacture these prototypes – time-consuming, costly preparatory work. The ISLE process supports
the production of complex geometries even without a mask, making it easier to
vary the geometry for fine-tuning.
The Fraunhofer Institute for Laser Technology ILT will
be showcasing an innovative In-volume Selective Laser
Etching (ISLE) process for glass on the joint Fraunhofer
stand C41 in hall 14 of this year’s glasstec, the flagship
trade fair for the glass industry, which takes place in Düsseldorf from September 28 to October 1, 2010. This process enables micrometer-fine structures to be created in
transparent material like silica glass, borosilicate glass,
sapphire and ruby. Trade visitors will be able to view
these components under a light microscope on a video monitor at the fair.
Biochips with microchannels measuring 100 micrometers in diameter, the same
thickness as a strand of human hair, are used for quick tests in medical research.
The channels in the small thin plates hold around a drop of fluid – blood in most
cases – which is analyzed with the aid of specialized medical equipment. At
present, biochips made out of plastic are used for this kind of application. However, substances from the plastic can diffuse into the test fluid and distort test
results. Partners from the field of medical engineering are therefore increasingly asking for biochips made out of glass. These glass biochips are chemically
neutral and essentially better suited for medical analysis applications than their
plastic counterparts. The only problem so far, however, has been the lack of
a suitable process for manufacturing microchannels in glass components. The
ISLE process from Fraunhofer ILT now for the first time provides a manufacturing process for microchannels, shaped holes and cuts in transparent glass
material. Selective laser-induced etching first involves irradiating the transparent component internally with a laser at the point where a structure, a channel
for instance, will subsequently be created. It is important that the component
is also processed right up to the edge to ensure the channel has an entry and
exit. At the irradiated points, the material now has a different structure than at
the untreated points. It exhibits 300-times higher etchability than the unexposed
material. The component is then immersed in a bath containing special, environmentally friendly etching fluid, enabling the exposed material to be etched
away. Next, the component is cleaned, leaving behind the required geometry,
in this case a fine system of channels. But this process can also be used to drill
holes, to manufacture tiny pipes with a wall thickness of eight 8 micrometers and
measuring one millimeter in both diameter and length, or to produce miniature
gears for the watchmaking industry. ”The greatest challenge is to avoid damaging the glass”, says Dr. Jens Gottmann, project manager at the Fraunhofer ILT.
”The remelting in the glass produces stresses that cause the material to crack
and make the component unusable. It’s all about finding the optimum irradiation
parameters, something we are constantly working on.” Gottmann and his team
are qualifying the process for customized applications and offer their customers
a microscanner with a suitable laser to produce the tailor-made geometry.
29
Potential for high-volume production The ISLE process could also be used in
future for high-volume production. Glass components have already been irradiated in the laboratory within a few seconds using a new high-power femtosecond
laser. Researchers from the Fraunhofer ILT are currently developing suitable
machine tools for high-volume production. Initial results show that the production of glass components is possible at costs similar to those for plastic components. The use of float glass instead of slightly less expensive plastic pays
off over the long term: The glass components boast higher quality and can be
kept for longer than their plastic counterparts. Glass biochips, for instance, can
be cleaned far more effectively than plastic biochips, and can even be sterilized
in an oven. They can therefore be used several times, making them extremely
resource- and environmentally friendly.
Apart from medical engineering, applications for the process also include precision mechanics, especially watchmaking. In future it should be possible to
produce microstructured 3-D components, gears and even preassembled drives
for instance, in glass. This application still requires further research, but at the
same time has the potential to generate substantial financial returns.
30
Online-Press Release and Photos: www.ilt.fraunhofer.de
Captions:
Product Overview
Picture: Gears, laser-cut in 1 mm silica glass by ISLE. Source: Fraunhofer ILT.
glasstec.07.05
Research institutes and projects
glasstec.21.03
Fraunhofer Institute for
Laser Technology ILT
Marketing and Communications
Dipl.-Phys. Axel Bauer
General Solar Systems Deutschland GmbH SONNENKRAFT
Steinbachstraße 15
52074 Aachen
Address
Clemont-Ferrand-Allee34
93049 Regensburg
Germany
Phone
+49 941 46463-0
Fax
+49 941 46463-31
Internet address
www.sonnenkraft.de
E-Mail
[email protected]
Stand
Phone +49 241 8906-194
Fax +49 241 8906-121
[email protected]
www.ilt.fraunhofer.de
Contacts at Fraunhofer ILT
Please contact our experts with any enquiries you may have:
Dr. Jens Gottmann
In-Volume Structuring
Phone +49 241 8906-406
[email protected]
Dipl.-Phys. Martin Hermans
In-Volume Structuring
Product Overview
Phone +49 241 8906-471
glasstec.21.01
General Solar Systems Deutschland GmbH...
[email protected]
Product Details
Fraunhofer Institute for Laser Technology ILT
General Solar Systems Deutschland GmbH...
Steinbachstraße 15
glasstec.21.01
52074 Aachen, Germany
Sonnen-kollektoren
Phone +49 241 8906-0
Fünf elegante und effiziente Lösungen:
Fax +49 241 8906-121 www.ilt.fraunhofer.de
Die Sonnenkollektoren von SONNENKRAFT passen sich perfekt in jede Dachlandschaft ein – oder verleihen jeder Gebäudefassade ein außergewöhnlich schönes
wie funktionales Erscheinungsbild.
31
32
glas platz gmbH & co. kg
Address
Product Details
Auf den Pühlen 5
51674 Wiehl-Bomig
Germany
powerglass® media facade - communicate in glass!
Phone
+49 2261 7890-0
Transparent. Communicative. Informative.
Fax
+49 2261 7890-10
Glass facades become media facades.
Internet address
www.glas-platz.de
E-Mail
[email protected]
Stand
Light and media design spectacularly integrated into architecture: powerglass® media facades are transparent high tech glass facades with integrated light emitting diodes (LED). They combine the buildings skin with trendsetting LEDcommunication technology. A unique feature is its total transparency. The white
LED are integrated into the cast resin laminate and can be powered and controlled via invisible conductors. Logos, text messages and animations can be
displayed on the outside and inside of a facade.
Product Overview
glasstec.21.01
Casting resin combinations
Laminated glass (other)
Structural-sealant-glazing facades
Other transparent facade systems
Other facade technologies
glasstec.21.01
powerglass® is produced exclusively at glas platz company in Wiehl-Bomig,
Germany and is supplied with metal construction works and all necessary control
components. powerglass® media facades are offered worldwide as a complete
package including technical advice, planning and installation in co-operation with
company seele austria.
The combination of media & architecture - facade communication of the future available today.
33
34
einem autorisierten Prüfinstitut durchgeführt.
Glas Trösch Holding AG
Address
Weitere Eigenschaften:
Industriestr. 29
4922 Bützberg
Switzerland
erhöhte Stoss- und Schlagfestigkeit Bruchstruktur nach EN 12150 (verletzungshemmende Krümelbildung) UV-stabil keine Drahteinlagen Biegebruchfestigkeit
nach EN 12150 Ballwurfsicherheit nach DIN 18032 Kugelfallfest nach DIN 52338
Pendelschlagfest nach DIN 52337
Phone
+41 62 9585252
Fax
+41 62 9585255
Internet address
www.glastroesch.ch
Eine neue Dimension für Anti-Reflexgläser
E-Mail
[email protected]
Stand
LUXAR ist ein Glas mit reflexfreien Oberflächen. Bei einer Reflexion von weniger
als 0,5% bereiten Sie mit unserem antireflektierenden, magnetronbeschichteten
LUXAR störenden Spiegelungen ein Ende. Optisch wird LUXAR daher kaum
wahrgenommen.
Product Overview
LUXAR wird überall dort angewendet, wo eine Trennung erforderlich ist, diese
selbst aber unsichtbar bleiben soll:
glasstec.21.01
glasstec.21.03
Product Details
glasstec.21.01
LUXAR
Auf einen Blick
FIRESWISS 30-6
FIRESWISS 30-6 ist ein Spezialglas, das in einem
aufwendigen Veredelungsverfahren zu einem Einscheibenbrandschutzglas verarbeitet wird. Dank seiner UVBeständigkeit kann das FIRESWISS 30-6 sowohl im
Innen- als auch im Außenbereich eingesetzt werden.
Auf sichttrübende Drahteinlagen konnte verzichtet werden. Im Brandfall bleibt das FIRESWISS 30-6 transparent. Zur Bestimmung der Feuerwiderstandsdauer
wurde die Verglasung einer Brandprüfung nach DIN 4102 Teil 13 unterzogen.
Die Prüfung des FIRESWISS 30-6 erfolgte in einem Stahlrahmen und wurde an
Schaufenster Anzeigetafeln Bilderrahmen Videowände Schalteranlagen Vitrinen usw.
35
Antireflektierendes, magnetronbeschichtetes Glas Keine störenden Spiegelungen und Lichtreflexe Minimalste Reflexionswerte Erhöhung der Lichttransmission um mehr als 10 % bei ISO Bei Durchsicht keine Farbverfälschungen Erhältlich als Float klar, Extraweiß, Farbglas Float-/Einfachglas mit beidseitiger
Beschichtung: Reflexion 0,5 % Isolierglas: Reflexion 1% (alle Seiten entspiegelt)
Die Beschichtung ist hart und beständig Verarbeitung zu ESG, VSG, Bogenglas Auch mit Siebdruck Isolierglas mit neutraler Wärmeschutzschicht SANCO
Silverstar 1.1N, Reflexion 2% Schichtsystem: harte Mehrfachbeschichtung auf
Magnetronbasis – verhält sich wie Hardcoating
SILVERSTAR COMBI Gläser
Sonnenschutzgläser kombiniert mit bestmöglicher
Wärmedämmung, neutralem Auftritt in Ansicht und
Durchsicht, hoher Lichttransmissionsgrad und tiefem
g-Wert. Geeignet für Bauten mit großem Glasanteil.
Kombinierbar mit Schallschutz und Sicherheit.
36
SILVERSTAR Wärmeschutzgläser
Product Overview
Die rasant steigenden Energiepreise der letzten Monate
haben einmal mehr die Bedeutung energieeffizienter
Fassadengläsern unterstrichen. Mit den neu entwickelten Schichtdesigns reagiert Glas Trösch auf die große
Nachfrage nach besonders wirtschaftlichen Glaslösungen mit hohen Wärmedämmeigenschaften. Höchste
Farbneutralität und Transparenz zeichnen diese Gläser
aus. Dank optimaler Lichttransmission sparen sie Energie für künstliche Beleuchtung und fördern das Wohlbefinden. Zudem eignen sie sich mit ihrem hohen
g-Wert vorzüglich zur passiven Sonnenenergie-Nutzung. SILVERSTAR ZERO
SILVERSTAR TRIII SILVERSTAR TRIII E SOLAR
Glaswerke Arnold GmbH & Co. KG
glasstec.03.02.03
Insulating glass
glasstec.21.01
glasstec.21.03
Product Details
glasstec.21.01
All-Glass Doors
Spacious rooms, bright corridors - thanks to glass
Address
Neuseser Str. 1
91732 Merkendorf
Germany
Phone
+49 9826 656-0
Fax
+49 9826 656-490
Internet address
www.arnold-glas.de
E-Mail
[email protected]
Stand
ARNOLD All-Glass Doors in single-pane safety glass allow uninterrupted vision
and create the impression of more space in rooms. They close off rooms without dividing them. Our all-glass doors are custom made to your requirements.
Optionally with engraved, sand-blasted or printed motifs.
For home, office and surgery
ARNOLD All Glass Doors are available in a variety of different glass types, with
scratchproof decors and designer fittings of your choice. Single or double leaf,
with or without side element or fanlight, as hinged, swing or sliding doors - allglass doors are permanently hygienic and look as good as new even after years
of use.
37
38
and to effectively extract the removed particles. Non-contact flat glass and solar module gripper system: A novel gripper system for picking the glass from its
coated face without touching or damaging the coating. An air stream, generated
with ultrasound, sucks the glass and simultaneously builds up an air cushion that
prevents the gripper from touching the glass. Handling and accumulator technology for flat glass and thin-film solar lines with optional clean room capability.
Grenzebach Maschinenbau GmbH
Address
Albanusstr. 1-3
86663 Asbach-Bäumenheim
Germany
Phone
+49 906 982-2000
Fax
+49 906 982-2108
Internet address
www.grenzebach.com
E-Mail
[email protected]
Stand
Please visit us at Glasstec, Hall 15 Booth B42.
Company News
08/22/2010
07/27/2010
Staff representatives from all over the world hosted in
Hamlar
Grenzebach Maschinenbau GmbH, the founding company of the Grenzebach Group, celebrated their 50year jubilee on July 9 when all members of staff were
invited to join the festivities in Hamlar.
Grenzebach – the family owned company welcomes
you at glasstec in Hall 15 B42 with the following
exhibition focuses
Grenzebach – the family owned company welcomes you at glasstec in Hall 15
B42 with the following exhibition focuses.
Discovering. Developing. Driving. Grenzebach goes 3D. Grenzebach is proud
to present a 3D film in their own cinema. Defect detection system for the endless
glass ribbon of float glass processing lines. This allows Grenzebach to undertake the entire quality assurance in a float glass processing plant. System for
eliminating ultra short reject sheets from a float glass processing line. This option particularly satisfies the needs of float glass plants mainly producing jumbo
and medium sizes. They can now rigorously minimize glass loss by eliminating
200 mm long reject sheets to cullet instead of the traditional 600 mm long reject
sheets. Ultrasonic welding of junction boxes and holders to solar modules as
well as welding holders for facade copings and fittings. What seemed to be out
of reach so far can now be done. Grenzebach developed a process for permanently bonding glass and metal without any adhesive. Edge decoating laser
for thin-film solar modules. Grenzebach proudly present a novel, vertical edge
decoating laser. This laser system allows to decoat all usual thin-film modules
50 years Grenzebach Maschinenbau GmbH
39
In his address under the theme „Grenzebach: yesterday – today – tomorrow“
CEO Bernd Minning depicted the impressive development history of the former
craftsman business that started off with just 7 employees in 1960. Today the
Grenzebach group is a global player with a workforce of 1500 spread over manufacturing locations in the three key currency regions (dollar and euro as well as
the Asian market) and with a worldwide network of sales and service agencies.
Grenzebach’s product portfolio is clearly structured ,starting with the core business ”glass“ with equipment for basic glass, TFT glass and solar panel manufacturers., The group’s second major field of activity is the “building materials“
business supplying manufacturing lines for makers of gypsum plaster board and
insulation materials.. The “General Industry“sector focuses on intralogistics, on
airport baggage handling and on the automotive industry. Grenzebach provide
equipment for all of the these businesses, including a wraparound service package: from a basic screw to a spare parts kit as well as full-scale maintenance
services with up-to-the-minute software updates.
World wide service agencies are an essential part of the „Service“ strategy. They
ensure Grenzebach stays close to their customers and facilitate a quick and
proficient response to customer requests and needs.
There are four mainstays which reflect the Grenzebach philosophy: Grenzebach
serve strongly growing markets with a strong emphasis on automation and innovation. In all this Grenzebach excel in: • innovative technology and process
know how, • short implementation times, • top quality and high reliability, • and
– most importantly – highly skilled and extremely motivated staff.
40
This emphasis on internationality and professionalism does not deflect the Grenzebach family or the group companies from a strong commitment to social activities – especially in fostering schools and development of young people.
Hamlar, July 2010
08/18/2010
Grenzebach - Cutting Process Optimization in Float
Glass Lines
Cutting Process Optimization in Float Glass Lines
Grenzebach is a longstanding supplier and development partner to glass manufacturers in need of process equipment, automation technology, specialized
cutting and handling systems as well as entire manufacturing lines and cold end equipment. Grenzebach
also engineers process technology and manufacturing
equipment for the photovoltaic and solar thermal industries.
For flat glass makers job-specific optimization and cutting plays a key role in
managing the cold end of a glass processing line. In fact, this high art of optimization directly affects the achievable peak glass yield.
A novel technical achievement (patent pending) strikes a new path to a significant yield increase in the float glass production business.
The assessment and qualification of non-conformities in the glass ribbon inevitably forces glass makers to score strips of faulty glass for elimination as
cullet. So far the shortest possible “cullet sheet” measured some 600 mm as
determined by the roller spacing of the downstream conveyors directing this cullet sheet to the next available drop and elimination section.
This minimum sheet length, seen over the full ribbon width, frequently embodied an avoidable glass loss especially when the particular glass defect situation
would allow a shorter cullet sheet.
ditionally snapped and conveyed to the next available cullet elimination point in
the very same way. However, the conventional float line roller spacing requires
a minimum 600 mm sheet for this. The now developed new snapping station
provides a moveable roller section that can open and close within a very short
time to create a discharge opening. This elimination sequence is initiated by the
Grenzebach PPC optimization system and is then materialized by the conveyor
line control system. The new snapping station can now snap and directly eliminate a scheduled short cullet sheet through the roller segment opening. After
cullet strip elimination the conveyor rollers return to their original position and
resume their function as standard conveyor rollers for subsequent production.
The newly developed snapping station design also reflects numerous customer
demands. The top pressure roll assembly is now, for example, driven by servomotors and allows manifold roller position settings (leading or trailing offset or
accurate positioning over the glass ribbon). A novelty is the likewise integrated
upper snap roll. If necessary, this extra snap roll can snap the cullet strip with
a linear down-movement in a specific and adjustable angle of attack. This new
feature is to further improve the snapping results in particular situations such as
for thicker glass.
An on-site operating terminal provides a variety of parameters for fine tuning
the machine performance. The Grenzebach PC-Panel visualization software
allows for the display and editing of all machine parameters from any operating
terminal.
The newly developed snapping station is already employed on running projects
and will soon prove its yield increasing capacities.
Grenzebach is a global corporation with many years of experience in Flat Glass
Technology.
Picture captions:
The Picture shows the new reduced-length cullet strip snapping and on the spot
elimination through the snapping station discharge opening.
The Grenzebach innovation now allows to reduce this 600 mm sheet to a mere
cullet strip of up to 170 mm and, subject to the detected defects, to minimize the
glass loss by up to 70 %.
Traditionally, the snapping station snaps the scored sheets with the main snapping roller. The snapping station raises this pneumatically actuated or motordriven roller pinpointed on the score passing the roller crest. In interaction with
the press roll assembly over the conveyor the glass snaps in a controlled way
due to flexure, sectioning the endless ribbon into individual sheets.
Depending on the job requirements, these sheets then directly go to the stackers
as jumbo sheets or are further cut up to smaller sized sheets. Faulty glass is tra-
41
42
Product Overview
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.05.02.02
CNC control for handling machines
glasstec.21.01
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.01.10.03
Inspection systems
glasstec.01.10.04
Paper applying machines
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
Cutting technology for float glass
Mechanical snapping devices
glasstec.02.05.01
Laser-isolating technology
glasstec.02.06.01
Vacuum coating equipment
glasstec.02.09.03
Foil treating technology (storing, climate, uncoiling)
glasstec.02.10.01
Washing machines and equipment
Address
Albanusstr. 1-3
86663 Asbach-Bäumenheim
Germany
Phone
+49 906 982-2000
Fax
+49 906 982-2108
Internet address
www.grenzebach.com
E-Mail
[email protected]
Stand
Hall 15, B42 (Page 102)
Company News
08/16/2010
Measurement and control of glass thickness
Measurement and control of speed
Measurement and control of glass tension
control
VIG - a window with wall insulation properties !
VIG - a window with wall insulation properties !
43
Insulating glass windows by double-glazing, bonding
two glass panes with a gas-filled spacing, has been a
success story for the last 50 years. However, in 2012
the new European Energy Saving Regulation EnEV
2012 will come into force, demanding thermal insulation values which traditional double glazing will be unable to achieve. Not only our own regional authorities, but also the US Government, have approved regulations which will herald the end of double glazing
units, as we know them, by 2013.
44
As a solution, window makers already offer the familiar triple pane window which
can reduce energy loss below the new limit values. However, such heavy-weight
insulating glass panes with a thickness exceeding 3 cm over-complicate window installation and place high demands on window frames and window fittings.
Moreover, they add considerable weight to glass facades and are often a determining factor as to the viability of retrofitting existing buildings, for example.
The use of krypton gas filling offers some improvement in triple pane design .
However, cost and environmental considerations make this impracticable on a
large scale. The metal coating on the inner glass side, limiting thermal radiation
to the outside or solar irradiation to the inside„ are only justified for cost optimization purposes. At best, this window pane can produce a U-value (formerly
K-value) of about 0.6, i.e. each square meter window surface just loses 0.6 watt
per degree K of inside/outside temperature difference. This is a good result but
still represents twice the value of an insulated exterior wall.
There is a better, visionary solution - VIG! This vacuum-insulated glass does not
require an insulating gas between the inner and outer pane, but relies on a void
– in reality - a vacuum. To prevent the atmospheric pressure from squeezing the
2 panes together, barely visible tiny spacers are placed in between. These new
window pane structures can theoretically achieve U-values of 0.2 and as such
match the efficiency of an excellently insulated exterior wall !
Considering that the vacuum requires just a few tenths of a millimeter spacing
between the panes, the slim VIG window is not half as thick and is overall lighter
and more stable than current double or triple pane glazing. The two panes,
squeezed under atmospheric pressure, and the spacers constitute a composite
structure making a glass pane thickness of just 2 mm possible, whilst achieving
the stability and sound insulation values of 4 mm glass.
The use of the thermos flask principle for windows is not a new idea, the first
VIG patent in Germany being granted in 1906. Since then, numerous attempts
have been made, world-wide to bond both panes in a way that, on the one hand,
allows a high 10-4 mbar inner vacuum to be maintained over a span of 20 years
or more, and, on the other hand, ensuring that the strain generated between
the inner and outer pane does not result in glass breakage. A few successful
solutions have merely satisfied a niche market as a substitute for single-glazed
small windows in Asian housings. The demanding requirements of Western
world markets however, have not been met - until now.
In 2004 Grenzebach, an engineering company with headquarters in AsbachBäumenheim (Hamlar), in the Donau-Ries region of Bavaria, sponsored by the
Department of Trade and Industry (BMWi) and assisted by the Project Management Organisation Jülich (PTJ), initiiated a new approach to this market demand
and launched the ProVIG research project (#0327419). Grenzebach, already
45
an established manufacturer of glass processing equipment, gathered around
some suppliers, an insulating glass manufacturer and a window maker, and
completed the project team with several Fraunhofer Institute affiliates and the
ZAE Bayern (Bavarian Center for Applied Energy Research).
Bonding two glass sheets vacuum tight, not too rigidly while allowing durable
flexibility, was a real challenge. New materials had to be developed and new processing methods invented. Several thousands of tiny spacers had to be placed
and accurately positioned between the two panes. Next, a vacuum needed to
be generated in the inner spacing. This vacuum had to remain free of any contamination or moisture even after 20 years, requiring a vacuum with a maximum
of one millionth molecules in the air.
Grenzebach now have a demonstration line in operation.for panes measuring
about 1 m x 1 m. The experience gained is already projected into full scale industrial production with an annual capacity of 400,000 VIG. The aim is to offer
a VIG production line manufacturing panes of any desired size and able to withstand demanding inspection cycles and tests. It must also be marketable at a
fair market price.
The first 8.5 mm slim panes have an initial U-value of 0.5 and excellent noise
absorbing properties. The spacers are so inconspicuous that at 1 m distance
they are only visible in a freshly cleaned window when they are pointed out. .
The next generation with a mere overall thickness of 6.5 mm and still better R
values is already in process ...
‘Glass-technology-live’ is a special show during glasstec 2010, in Düsseldorf, It
is an excellent stage on which to showcase the first VIG results in September
2010. Product and process details will be presented in a gtl series of presentations on 29 September in the afternoon. Throughout the period of the trade fair
the special ’Glass-technology-live’ show will serve as platform for our VIG exhibits and demonstrate how our windows will look in a few years from now. VIG
window panes made of float glass and of tempered single-layer safety glass,
measuring 1 m x 1 m, and even 1800 mm high VIG will be exhibited along with
the new VIG ISO window pane. This combined dual-pane glazing consists of a
VIG and of a coated float glass pane. Achieving a U-value of 0.3 it is a worldbeater in solar protection for such composite structures. Its R values already
match those of an insulated exterior wall !
More and more window makers and architects world wide are asking the question: When can we buy this VIG ? This demand redoubles the determination of
the project team. Whereas inventors prefer step by step functionality optimization in a small scale line, Grenzebach insulation glass customers are impatient
for short-term annual production capacities producing millions of VIG sheets.
This incentive has encouraged further co-operation between Grenzebach and
46
its partners with the aim of starting up, in a joint effort, such VIG production lines
by 2012.
It will be interesting to see if an equally visionary innovation will be introduced
during ‘glasstec 2012’!
07/27/2010
50 years Grenzebach Maschinenbau GmbH
Hamlar, July 2010
08/18/2010
Grenzebach - Cutting Process Optimization in Float
Glass Lines
Cutting Process Optimization in Float Glass Lines
Grenzebach is a longstanding supplier and development partner to glass manufacturers in need of process equipment, automation technology, specialized
cutting and handling systems as well as entire manufacturing lines and cold end equipment. Grenzebach
also engineers process technology and manufacturing
equipment for the photovoltaic and solar thermal industries.
50 years Grenzebach Maschinenbau GmbH Staff representatives from all over the world hosted in Hamlar
Grenzebach Maschinenbau GmbH, the founding company of the Grenzebach Group, celebrated their 50year jubilee on July 9 when all members of staff were
invited to join the festivities in Hamlar.
In his address under the theme „Grenzebach: yesterday – today – tomorrow“ CEO Bernd Minning depicted the impressive development history of the former craftsman business that started off with just 7 employees in 1960. Today the Grenzebach group is a global player with a workforce
of 1500 spread over manufacturing locations in the three key currency regions
(dollar and euro as well as the Asian market) and with a worldwide network of
sales and service agencies.
Grenzebach’s product portfolio is clearly structured ,starting with the core business ”glass“ with equipment for basic glass, TFT glass and solar panel manufacturers., The group’s second major field of activity is the “building materials“
business supplying manufacturing lines for makers of gypsum plaster board and
insulation materials.. The “General Industry“sector focuses on intralogistics, on
airport baggage handling and on the automotive industry. Grenzebach provide
equipment for all of the these businesses, including a wraparound service package: from a basic screw to a spare parts kit as well as full-scale maintenance
services with up-to-the-minute software updates.
World wide service agencies are an essential part of the „Service“ strategy. They
ensure Grenzebach stays close to their customers and facilitate a quick and
proficient response to customer requests and needs.
There are four mainstays which reflect the Grenzebach philosophy: Grenzebach
serve strongly growing markets with a strong emphasis on automation and innovation. In all this Grenzebach excel in: • innovative technology and process
know how, • short implementation times, • top quality and high reliability, • and
– most importantly – highly skilled and extremely motivated staff.
This emphasis on internationality and professionalism does not deflect the Grenzebach family or the group companies from a strong commitment to social ac-
tivities – especially in fostering schools and development of young people.
47
For flat glass makers job-specific optimization and cutting plays a key role in
managing the cold end of a glass processing line. In fact, this high art of optimization directly affects the achievable peak glass yield.
A novel technical achievement (patent pending) strikes a new path to a significant yield increase in the float glass production business.
The assessment and qualification of non-conformities in the glass ribbon inevitably forces glass makers to score strips of faulty glass for elimination as
cullet. So far the shortest possible “cullet sheet” measured some 600 mm as
determined by the roller spacing of the downstream conveyors directing this cullet sheet to the next available drop and elimination section.
This minimum sheet length, seen over the full ribbon width, frequently embodied an avoidable glass loss especially when the particular glass defect situation
would allow a shorter cullet sheet.
The Grenzebach innovation now allows to reduce this 600 mm sheet to a mere
cullet strip of up to 170 mm and, subject to the detected defects, to minimize the
glass loss by up to 70 %.
Traditionally, the snapping station snaps the scored sheets with the main snapping roller. The snapping station raises this pneumatically actuated or motordriven roller pinpointed on the score passing the roller crest. In interaction with
the press roll assembly over the conveyor the glass snaps in a controlled way
due to flexure, sectioning the endless ribbon into individual sheets.
Depending on the job requirements, these sheets then directly go to the stackers
as jumbo sheets or are further cut up to smaller sized sheets. Faulty glass is traditionally snapped and conveyed to the next available cullet elimination point in
the very same way. However, the conventional float line roller spacing requires
48
a minimum 600 mm sheet for this. The now developed new snapping station
provides a moveable roller section that can open and close within a very short
time to create a discharge opening. This elimination sequence is initiated by the
Grenzebach PPC optimization system and is then materialized by the conveyor
line control system. The new snapping station can now snap and directly eliminate a scheduled short cullet sheet through the roller segment opening. After
cullet strip elimination the conveyor rollers return to their original position and
resume their function as standard conveyor rollers for subsequent production.
The newly developed snapping station design also reflects numerous customer
demands. The top pressure roll assembly is now, for example, driven by servomotors and allows manifold roller position settings (leading or trailing offset or
accurate positioning over the glass ribbon). A novelty is the likewise integrated
upper snap roll. If necessary, this extra snap roll can snap the cullet strip with
a linear down-movement in a specific and adjustable angle of attack. This new
feature is to further improve the snapping results in particular situations such as
for thicker glass.
eliminating ultra short reject sheets from a float glass processing line. This option particularly satisfies the needs of float glass plants mainly producing jumbo
and medium sizes. They can now rigorously minimize glass loss by eliminating
200 mm long reject sheets to cullet instead of the traditional 600 mm long reject
sheets. Ultrasonic welding of junction boxes and holders to solar modules as
well as welding holders for facade copings and fittings. What seemed to be out
of reach so far can now be done. Grenzebach developed a process for permanently bonding glass and metal without any adhesive. Edge decoating laser
for thin-film solar modules. Grenzebach proudly present a novel, vertical edge
decoating laser. This laser system allows to decoat all usual thin-film modules
and to effectively extract the removed particles. Non-contact flat glass and solar module gripper system: A novel gripper system for picking the glass from its
coated face without touching or damaging the coating. An air stream, generated
with ultrasound, sucks the glass and simultaneously builds up an air cushion that
prevents the gripper from touching the glass. Handling and accumulator technology for flat glass and thin-film solar lines with optional clean room capability.
An on-site operating terminal provides a variety of parameters for fine tuning
the machine performance. The Grenzebach PC-Panel visualization software
allows for the display and editing of all machine parameters from any operating
terminal.
The newly developed snapping station is already employed on running projects
and will soon prove its yield increasing capacities.
Product Overview
glasstec.01.10.01
glasstec.01.10.03
Inspection systems
Picture captions:
glasstec.01.10.04
Paper applying machines
Picture 2 shows the new reduced-length cullet strip snapping and on the spot
elimination through the snapping station discharge opening.
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Grenzebach is a global corporation with many years of experience in Flat Glass
Technology.
08/22/2010
Grenzebach – the family owned company welcomes
you at glasstec in Hall 15 B42 with the following
exhibition focuses.
Grenzebach – the family owned company welcomes you at glasstec in Hall 15
B42 with the following exhibition focuses.
Discovering. Developing. Driving. Grenzebach goes 3D. Grenzebach is proud
to present a 3D film in their own cinema. Defect detection system for the endless
glass ribbon of float glass processing lines. This allows Grenzebach to undertake the entire quality assurance in a float glass processing plant. System for
49
50
glasstec.02.05.01
Laser-isolating technology
glasstec.02.06.01
Vacuum coating equipment
glasstec.02.09.03
Henze-Glas GmbH
Address
Gänsewinkel 2
37412 Hörden/Harz
Germany
Foil treating technology (storing, climate, uncoiling)
Phone
+49 5521 9909-0
glasstec.02.10.01
Washing machines and equipment
Fax
+49 5521 9909-20
Measurement and control of glass thickness
Internet address
www.henzeglas.de
Measurement and control of speed
E-Mail
[email protected]
Measurement and control of glass tension
Stand
control
Product Overview
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.03.02.03
Insulating glass
glasstec.05.02.02
CNC control for handling machines
glasstec.21.01
glasstec.21.01
glasstec.21.02
glasstec.21.03
Henze-Glas GmbH
Product Details
glasstec.21.01
Henze-Glas GmbH
Ornamentglas
Je nach Verwendungszweck, Platzierung und Geschmack bieten wir Ihnen eine
Vielzahl von Kombinationsmöglichkeiten.
Nach Bedarf können getönte, verspiegelte, gewölbte, facettierte, bedruckte oder
strukturierte Gläser zum Einsatz kommen
51
52
mac’s new Primus with 5-axis operating head will be available for demonstration. A solution which offers a series of undisputable advantages for those faced
with specific machining such as glass for domestic appliances and household
objects. Among the advantages of this solution is the ICad software migrated
from the Master series work centres and which many owners of Intermac CNC’s
already know.
Intermac Glass and Stone Division
Address
Via della Meccanica,16
61122 Pesaro
Italy
Phone
+39 0721 4831-00
Fax
+39 0721 4821-48
Internet address
www.intermac.com
E-Mail
[email protected]
Stand
Hall 16, A59 (Page 104)
Company News
06/23/2010
Work centres: Intermac’ s unequalled technological leadership in the sector of
glass work centres will be confirmed by the presence at the trade fair of a Master 45 centre (5-axis operating head) and a Master 33 centre (3-axis operating
head).
Double edging grinding: Busetti, leading trademark in the grinding machine sector will be present at the fair with two single machines: one dedicated to flat
edges (F Series) and one dedicated to pencil edges (P Series).
Drilling: Last but not least, on the stand it will also be possible to attend demonstration sessions of the most representative machines of the Busetti drilling
machinery range, namely the V Series vertical drilling machine for large glass
sheets and the semi-automatic drill called Giò.
Intermac Glass & Stone Division at Glasstec 2010
ntermac’ s stand at Glasstec 2010 will occupy an area
of about 800 m2 and will be subdivided into different
dedicated spaces.
Tempering: The Intermac-BHT partnership, one of the reference trade name
for the top tempering furnace segment, which was launched at the time of last
year’s Glasstec exhibition, continues and this year BHT staff will also be present
on the Intermac’ s stand in a dedicated corner with videos, samples and all what
necessary to satisfy all our customers’ requests and curiosity.
Product Overview
Cutting: Intermac will display a Comby R-A37 line for
alternate cutting of monolith and laminated glass. This is an ideal solution for
glassworks that need to have two automatic lines, one for float glass and one
for laminated glass, but have a limited production surface area. With Comby it
is possible to maintain the same productivity levels on the machines composing the line, while obtaining a significant reduction in overall dimensions and
a strong increase in productivity and process automation against a limited increase in the investment required. Two laminated glass cutting solutions will
also be presented: Genius 37 LM (semi-automatic) and Genius 37 LM-A (automatic). These machines have been designed to offer different customers a very
fast machining cycle and have the operator’s comfort at the centre of the project.
Genius 37 CT RS is a cutting table for monolith glass intended for glassworks
with limited space available (also vertically during unloading of glass sheets) that
offers the same level of technology as the famous Genius 37-61 CT tables.
Cutting technology for laminated safety glass
Cutting technology for technical glass
Waterjet: To represent the segment of water cutting systems this year, Inter-
53
54
glasstec.02.02
Drilling technology
Company News
Grinding techniques for straight edges
08/31/2010
Grinding techniques for patterned glass
glasstec.02.03.05
Polishing technology
glasstec.02.11.01
Tools
“Market maturity for new laminated glass system with
Ug value of 0.3, burglar resistance P8B, bullet
resistance BR7NS”
“trisophon” Product innovation from isophon glas GmbH
results in multi-layer glazing system with extreme impact
resistance as well as a stunning Ug-value of 0.3 W/m2K
The leading producer of multi-layer glazing units in the
south of Lower Saxony, Germany - isophon glas GmbH
- announces market maturity of a record-breaking, patented
multi-layer glazing system with extraordinary features in
terms of impact resistance as well as insulation characteristics. The product which is available under the brand
name “trisophon” has an Ug-value that can go as low as 0.3 W/m2K. The burglar resistance category goes up to P8B and bullet resistance class up to BR7NS
(BR6NS+S and BR7NS+S are undergoing tests in the moment).
glasstec.03.10.01.01.07Machinery/tools
glasstec.03.10.03.01.01Grinding technology
glasstec.21.02
isophon glas GmbH
isophon glas GmbH will be exhibiting trisophon at the glasstec 2010 in Düsseldorf, Gernan from September 28. to October 1. Hall 10 Booth G45
isophon glas GmbH
Address
Volkmarshäuser Str. 17
34346 Hann. Münden
Germany
Phone
+49 5541 98500
Fax
+49 5541 985040
Internet address
www.isophonglas.de
E-Mail
[email protected]
Stand
These stunning product properties are achieved with a revolutionary new combination technique where a polycarbonate sheet is integrated into the system as
a floating panel. “The heavy laminated polycarbonate-glass systems available
in the past are simply not usable due to the very different material properties.
They tend to show drastic aging effects after a very short period of time.” says
Torsten Bold, manager and technical director at isophon glas GmbH. Bold further: ”The floating integration of the polycarbonate in the window system has
been developed precisely in order to avoid these effects”. The integration of
the polycarbonate without lamination to the glass also opens up possibilities for
various new applications.
The integrated polycarbonate sheet within the trisophon multi-layer glazing system prevents thermal energy dissipating to the outside, since the floating integration of the elastic polycarbonate results in the kinetic energy being absorbed
not only by a single tiny point of the material. In the trisophon system, kinetic
energy is absorbed by the entire polycarbonate sheet. The trisophon multi-layer
glazing system underlines isophon’s unique and resolute development of innovations. “Laminated glazing systems with this combination of extreme burglar
resistance (P8B) and a Ug-Value of 0.3 W/m2K were simply not available up to
now”, says Bold. trisophon is not only extremely insulating and impact-resistant,
it is also lightweight at 40 kg/m2 (in the P8B category with 3 layers) and thin,
having a total thickness of only 36 mm. Burglar-resistant and bullet-proof glass
55
56
manufactured using conventional technology can easily be twice as heavy and
considerably thicker.
Hann. Münden
isophon glas GmbH is very happy to finally be able to present a product with
these outstanding properties. Public building specifications often called for low
Ug-values in conjunction with high burglar resistance - a combination of requirements which could hardly be fulfilled. Emergency exits with emergency opening
device, for example, are required to prevent access to the building by shattering the glass from the outside. The trisophon product family therefore makes
multi-layer glazing systems available which are both affordable and have a long
service life, as well as complying with the requirements on the construction of
public buildings. It has, for instance, already been granted an ift certificate (Institut für Fenstertechnik, i.e. German Window Technology Institute) authorizing
it for use in resistance class WK3 (according to German standard DIN V EN V
1627). Further certifications for international standards are planned.
[email protected]
Further applications of trisophon are to be presented in the coming months. The
ground-breaking properties in terms of insulation and impact resistance resulting from the floating polycarbonate panel and the unique features of the different
panel materials point the way towards various markets. The mix of different materials in the trisophon product absorbs laser beams instead of reflecting them.
This, in combination with the bullet resistance, opens up an entirely new usage
in the sector of security technology for buildings. Knowing that the absorption
of laser beams already passively prevents voice interception, isophon and a
partner company are currently developing a system additionally incorporating
artificial noise into the trisophon window system - this would then effectively rule
out the possibility of laser-based espionage.
Germany
Telephone: +49 5541 94 69 045
Mobile: +49 173 7767 883
Product Overview
Laminated glass, synthetic-coated
glasstec.03.02.03
Insulating glass
Heat insulation glass
glasstec.21.03
Kuraray Europe GmbH, Division TROSIFOL
Address
Mülheimer Str. 26
53840 Troisdorf
Germany
Phone
+49 2241 2555220
Fax
+49 2241 2555299
Internet address
www.trosifol.com
E-Mail
[email protected]
Stand
(4038 characters including blanks)
About isophon glas GmbH isophon glas GmbH was founded in 1979 and is a
highly specialized manufacturer of glass systems. The product range mainly
consists of multi-layer glazing for windows and doors right through to edged,
metal-coated or coated glass panels. ispohon products are used in building facades as well as shower cubicles in designer bathrooms. isophon glas GmbH’s
speciality is the fabrication of glass with special technologies as well as insulating glass panels in unusual shapes (with exotic geometry) and non-standard or
huge sizes. Their special expertise in processing exotic materials such as polycarbonate distinguishes isophon from all other manufacturers. isophon not only
processes small product ranges from one single vendor - a high number of products from a number of vendors is processed at isophon. Even direct competitors
of isophon glas GmbH source products from isophon when tricky pane geometries or special sizes are called for. isophon’s workforce currently numbers 70.
isophon glas GmbH
Contact isophon glas GmbH Gerald Salisbury Volkmarshäuser Straße 17 34346
57
58
Company News
09/21/2010
application.
Trend towards PVB
SOLAR CELLS ON FAÇADES Reliable protection on
façades
PVB films for solar modules – Façade-integrated photovoltaics or “Buildingintegrated photovoltaics” (BIPV) making use of thin-film technology facilitate the
efficient use of the building envelope, enabling it to generate electricity. However, very few solar modules can make do without reliable and lasting protection
from external influences, particularly when attached to façades. Polyvinyl butyral
(PVB), a film that has been better known until now for its use in laminated safety
glass, is now attracting attention.
The market segment for solar modules integrated in façades or used as solar
glass roof elements is steadily growing. Its market share is currently at less
than 1 per cent of module installations, as many systems are still very costly
and building connection technology is still underdeveloped and not sufficiently
standardized.
On PV modules, the solar cells have to be protected from external influences.
Encapsulation consisting of transparent plastics is making a huge contribution
here to the durability of photovoltaic modules and to long-term power generation
from sunlight. This applies particularly to building façades. With BIPV systems,
it is not only possible to generate electricity and reduce CO2, but also to (at least
partly) refinance the façade by feeding the electricity into the grid.
These building-integrated PV systems are becoming increasingly attractive and
efficient. They represent a good combination of efficient surface use and aesthetics. A big help here has been the further development of PV modules making
use of thin-film technology. Of great importance here is polyvinyl butyral (PVB),
a film that has so far been better known for its use in laminated safety glass.
A fine example is the New York Stillwell Avenue subway station, which has the
world’s largest integrated PV installation with thin-film modules, equipped with
TROSIFOL PVB films.
Since 2005, there have been moves in the PV and glass industry to introduce
PVB film as the encapsulation material of double-glazing elements with integrated solar cells. The aim is to significantly improve the safety standards of
laminated module glass of building-integrated photovoltaics (BIPV).
Furthermore, thin-film solar modules comprising two panes of glass with a PVB
interlayer can be inexpensively produced with the two-stage lamination process
familiar from laminated safety glass.
With the now appreciable and steadily growing demand for thin-film solar modules – forecasts anticipate 40 per cent of total module output by 2020 – the use
of PVB film will continue to increase and claim a growing share of the market.
The reasons for the low market shares of other plastics include the lack of experience with these products in the solar industry, their in some cases inferior
technical properties and their excessively high cost. In addition, these materials
have to reliably demonstrate a service life of 20 to 25 years in solar modules.
High safety standards
Building-integrated photovoltaics, particularly in Europe, are subject to the same
high safety standards as all other glazing on façades and in overhead glazing
applications.
For overhead applications in Germany, the list of standards and specifications
for the construction industry calls for an interlayer of PVB. When these elements are replaced with solar modules, these standards and specifications remain unchanged. This means that EVA and other plastics in PV modules have
to overcome a number of regulatory hurdles in such applications. For buildingintegrated photovoltaics, experts are expecting strong growth in commercial use
over the next ten years.
The author Dr. Bernhard Kroll is employed in Technical Marketing at Kuraray
Europe GmbH in the TROSIFOL Division. www.trosifol.com
The first manufacturer worldwide to develop a special PVB film for use in solar
modules was Kuraray Europe GmbH under the brand name of TROSIFOL, as
the company reports.
Photos: Same high standards of safety Façade-integrated PV systems are subject to the same safety standards as all other glazing on façades or in overhead
applications.
Since the beginning of the Eighties, solar modules with TROSIFOL PVB films
have been undergoing successful outdoor weathering tests on module test
stands of Berlin’s Photovoltaic Institute and the Fraunhofer ISE in Freiburg,
among others. Designed for all conventional PV module production processes,
Kuraray introduced at the end of 2009 a second and technically improved generation of films that supplements the current range of films in special fields of
July 13, 2010
59
We look forward to seeing you at the “glasstec 2010” in Düsseldorf: Hall 10,
stand E36.
TROSIFOL® is one of the leading manufacturers of PVB film for laminated safety
glass worldwide. TROSIFOL products are mainly used in applications for auto-
60
motive and architectural glazing, special TROSIFOL films are used to encapsulate solar cells with long term durability in the photovoltaic industry (PV). In 2004
TROSIFOL was the first manufacturer worldwide to develop a special product
line for PV applications based on polyvinyl butyral (PVB). Since then, module
manufacturers have had a choice between module production in vacuum laminator or in the process with vacuum deairing and subsequent lamination in autoclaves. All major companies of the glass and the photovoltaic industry are part of
TROSIFOL’s customer base. The background material for all TROSIFOL films
is Polyvinyl Butyral (PVB) that has been used as an interlayer in laminated safety
glass since the middle of the thirties of the 20. century. The experience gained
from the processing of this material since 1953, thanks to ongoing research and
development, is one of the main reasons for technical leadership of TROSIFOL as a manufacturer of films for structural glazing and TROSIFOL’s worldwide success. TROSIFOL operates its headquarters in Troisdorf, near Cologne
(Germany) and an additional plant in Nishny Novgorod, Russia, both certified
to ISO/TS 16949 and DIN EN ISO 9001:2000 standards. There are marketing
subsidiaries in the United States, Malaysia, India, China and Ukraine.
Today TROSIFOL is a Division of Japan based chemical group Kuraray Co. Ltd
(Tokyo) which is the world’s leading producer of polyvinyl alcohols (PVA), one of
the initial products for polyvinyl butyral resins and raw material for TROSIFOL
PVB film. Founded in 1926, the Kuraray Group with headquarters in Tokyo,
Japan, is the world’s biggest producer of water-soluble synthetic polyvinyl alcohols. In Europe, operating business, sales and production of chemical specialties are handled by EVAL Europe in Antwerp, Belgium and Kuraray Europe
GmbH in Frankfurt (Germany). PVA is e.g. a crucial chemical product for the
production of paper, textiles as well as for paints, printing inks, adhesives and
ceramics. Kuraray Europe GmbH has installed an integrated management system that satisfies the requirements of a quality management system conforming
to DIN EN ISO 9001:2000 with the supplementary demands of the automotive
industry ISO/TS 16949, an environmental management system conforming to
DIN EN ISO 14001:2005 and an occupational safety and health management
system conforming to BS OHSAS (Occupational Health and Safety Assessment
Series) 18001:2007. This is externally monitored by annual certification.
This text comprises 4,332 characters. You can also download the text from the
Internet at: http://www.trosifol.com
Please find pictures at the following address (captures are saved in the IPTC
data): http://gallery.me.com/rainer.hardtke - 100540
Pictures of architectural and automotive applications can be downloaded at this
address: http://gallery.me.com/rainer.hardtke - 100548
Press contact: Jörg Theesfeld, Head of Business Development & Marketing
61
Kuraray Europe GmbH, Division TROSIFOL, Mülheimer Strasse 26, D-53840
Troisdorf, Germany Phone +49 (0) 22 41 / 2555-202 Fax +49 (0) 22 41 / 2555299 E-Mail [email protected]
09/21/2010
TROSIFOL highlights at glasstec 2010
A self-luminous film, an improved acoustic product
and photovoltaic applications for BIPV
LUMINEO TROSIFOL is launching another new, revolutionary product on the
market. A self-luminous PVB film by the name of LUMINEO, the new film
achieves its effect with a special formulation (European patent pending). Developed to European standards for safety glass, it can be combined with other
TROSIFOL films to modify the optical and acoustic properties. LUMINEO reduces the need to install additional light sources in public areas for emergency
situations, e.g. power failures. LUMINEO meets the criteria of the German Lists
of Construction Products “Deutsche Bauregellisten” of the DIBt (German Institute of Construction Technology). At the fair stand in Düsseldorf, it will be the
main attraction and, in a small LUMINEO environment, visitors will have the opportunity to gain first-hand experience of the product.
Improved sound insulation with TROSIFOL SOUND CONTROL (SC+) After
years of success with its SOUND CONTROL (SC) film, TROSIFOL is also presenting an improved product at this year’s glasstec. This is a multi-layer film that
surpasses the accustomed high standards of safety and outstanding sound protection properties of the existing TROSIFOL SC film. The new film has been specially developed for the production of jumbo-size high-performance laminated
safety glass with a width of 3.21 m. It is precisely here that the new SC+ film is
employed to best effect by measurably improving efficiency in production.
In addition, depending on the structure of the associated ISO glazing, sound
insulation values of up to 50 dB can be achieved. It goes without saying that the
new film can be combined with other PVB films from the TROSIFOL range.
BIPV with TROSIFOL SOLAR TROSIFOL is staying busy in the fast-growing
photovoltaic market and, more specifically, in the BIPV sector. BuildingIntegrated Photovoltaics covers the whole spectrum of solar power generation
on façades. Encapsulation materials made of transparent plastics make an important contribution to the longevity of photovoltaic modules and to the long-term
production of electricity from sunlight. These BIPV systems are becoming increasingly attractive and cost-effective each year and sensibly combine efficient
surface use and aesthetics.
The world’s first manufacturer to develop a special PVB film for use in solar
modules was Kuraray Europe GmbH under the TROSIFOL brand name. Since
the Eighties, solar modules with TROSIFOL PVB films have been undergoing
62
successful outdoor weathering tests on module test stands, inter alia at the Berlin
Photovoltaics Institute and the Fraunhofer ISE Institute in Freiburg. Designed
for all conventional photovoltaic module production processes, a second and
technically improved generation of films was presented by Kuraray at the PV
Conference 2009 in Hamburg at the end of last year. This new film generation
extends the current product range into special fields of application and is now
being presented in Düsseldorf to the glass industry. 25th August 2010
We look forward to your visit during glasstec 2010 in Düsseldorf: Hall 10, Stand
E36.
Please also visit TROSIFOL at the special “glass technology live” show in Hall
11, Stand 11B26.
This text comprises 3,085 characters. You can also download the text and the
associated images from the Internet at: www.trosifol.com
Product Overview
Laminated glass technology with foil for architectural
glass
Laminated glass technology with foil for automotive
glass
Laminated safety glass
Laminated glass (other)
Noise absorbing glass
You can download matching LUMINEO images at this address (captions/photographer
are stored in the IPTC data, all images from Kuraray Europe GmbH, Division
TROSIFOL): http://gallery.me.com/rainer.hardtke - 100689 The images present
daytime views of the product and the matching night-time views with the LUMINEO effect.
glasstec.03.02.11
Optical glass
glasstec.03.03
Automotive glass
You can download images of TROSIFOL architectural applications at: http://gallery.me.com/rainer.hardtke
- 100548
glasstec.03.04.01.01.01Cristallyne PV panels
And images of TROSIFOL SOLAR can be found here: http://gallery.me.com/rainer.hardtke
- 100540
glasstec.03.04.01.01.02Thin film PV panels
Press contact: Jörg Theesfeld, Head of Business Development & Marketing Kuraray Europe GmbH, Division TROSIFOL, Mülheimer Strasse 26, 53840 Troisdorf, Germany Phone +49 (0) 22 41 / 2555 202 Fax +49 (0) 22 41 / 2555 299
E-mail: [email protected]
63
glasstec.03.04.03
Solar architecture and building integrated photovoltaics
glasstec.21.01
64
Product Details
Logistic System Pichler GmbH
glasstec.21.02
Address
Heinrichsbrunn 2
4310 Mauthausen
Austria
Phone
+43 7238 4215
Fax
+43 7238 29249
Internet address
www.logistic-system.at
E-Mail
[email protected]
Stand
Product Overview
Compact System
glasstec.01.13.02
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.21.02
glasstec.21.03
- Das Compact System ist ein längs verstellbares Glaslagersystem und dient zur Lagerung von Flachgläsern. - Es
zeichnet sich durch eine einfache und sichere Handhabung, sowie durch eine hohe Tragfähigkeit aus. Das Compact System wurde nach eingehender Bedarfsanalyse und in Zusammenarbeit eines Technischen
Büros entwickelt. - Das Compact System besteht aus einer Laufschiene und
einer Mitlaufschiene auf denen quer fahrbare Lagermodule zur Aufnahme der
Flachgläser aufgesetzt sind. - Die einzelnen Elemente sind im Schachtelprinzip
angeordnet. Alle Elemente können Manuell, mit Handrad, oder automatisch
mit Elektroantrieb verstellt werden. - Der Freiraum zwischen den Elementen
dient zur Beladung bzw. Entnahme der Flachgläser. - Die Elemente werden
in zwei Ausführungsvarianten geliefert. Für Einzelscheiben mit wasserfester
Holzauflage unten. Für End –Cup‘s mit Abstandhalter. (Kiste kann bis auf
den Unterteil entfernt werden) - Die Auflageflächen sind bei Einzelscheiben mit
Zellkautschukstreifen versehen. -Zusätzlich besteht noch die Möglichkeit, bei
der Einzelscheibenvariante auch an der vertikalen Anlageseite eine wasserfeste
Holzplatte anzubringen, um das Durchfallen kleinerer Glasstücke zu verhindern.
- Eine andere Benutzung gilt als nicht bestimmungsgemäß. Für hieraus resultierende Schäden
Flex System
Flex-System Schubfachlager
- Das Flex System - Schubfachlager dient zur Lagerung
von Flachglas das gruppenweise in einzelnen ausziehbaren
Rahmen (Schiebefächern) gelagert wird. - Type FS ***
BJT ist für einzelne Scheiben gedacht. - Type mit den
Endbuchstaben BB, BBL dient zur Lagerung der ganzen Glaskisten (END-CUP)
65
66
PLUS Label Maker : Bar Code Labeling & Tracking solution
Nirvana Technologies (P) Ltd.
Address
A3/492, Sahakar Nagar, Part 2, Chembur
400 071 Mumbai
India
Phone
+91 22 21661600
Fax
+91 22 39167297
Internet address
www.nirvanatec.com
E-Mail
[email protected]
Stand
Hall 15, A13 (Page 102)
Company News
Product Overview
glasstec.01.10.01
glasstec.02.13.02
Software
glasstec.05.03.01
MRP/CAD/CIM systems
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.21.03
North Western Lead (Hyde) Ltd
Address
Newton Moor Industrial Estate, Mill
SK14 4LJ Hyde, Cheshire
United Kingdom
Phone
+44 161 3684491
Fax
+44 161 3665103
Internet address
www.decraled.co.uk
Please visit the following URL for more details on our products… www.nirvanatec.com/products.html
E-Mail
[email protected]
Nirvana Technologies provides complete suite of optimization solutions for glass
industry. Of these the following producuts will be on demonstration during the
exhibition.
Stand
09/17/2010
Special Exhibition Offer for Glasstec 2010
Nirvana Technologies is pleased to announce a Special Exhibition offer during Glasstec 2010, Düsseldorf,
Germany.
All visitors who participate in a demo session will be
eligible for discount coupons that they can collect at
the Booth (Hall 15, A-13). In addition our engineers
will be pleased to take you through a test drive of our
software, and answer any queries you may have.
PLUS 2D Glass : Optimization Software
Company News
PLUS 1D : Bar nesting software for profiles and extrusions
PLUS Glass Manager : Order Processing and Inventory Management Software
PLUS Replicam : Digitizing software to replicate templates
09/20/2010
New Products from Decra Led!
Come and see our new Spectrum Film range with 140 colour films; the new,
67
68
narrower width of lead: 2mm, perfect for intricate designs. Also, New England
Lead: flat lead with raised edges in 9mm and 12mm, Natural and Antique finishes.
Company News
Product Overview
Q-railing – Produzent professioneller Geländersysteme
– präsentiert auf der Glasstec in Düsseldorf das innovative Easy Glass® Evo. Das Glasgeländersystem
kombiniert bestechendes Design mit kompromissloser
Qualität sowie einer schnellen und extrem einfachen
Montage.
glasstec.03.10.03.02.02Bonding technology
glasstec.03.10.03.02.03Decorative foils
glasstec.03.10.03.02.08Lustre, painting materials and adhesive agents
glasstec.03.10.03.02.09Screenprinting, framing, painting and texturing tools
glasstec.03.10.03.02.13Creative glass products (glass art)
Marie-Curie-Str. 8-14
46446 Emmerich am Rhein
Germany
Phone
+49 2822 91569-0
Fax
+49 2822 91568-70
Internet address
www.q-railing.com
E-Mail
[email protected]
Stand
Neuer Standard Die Topattraktion auf dem Q-railing Stand ist Easy Glass® Evo.
Mit diesem Glasgeländer trägt Q-railing dem ungebrochenen Trend zu Ganzglasgeländern weiter Rechnung. Besucher können mit eigenen Augen erfahren,
wie Easy Glass® Evo einen neuen Standard in Design und Qualität schafft.
Auch die bisher ungekannt einfache und schnelle Montage wird live präsentiert.
Natürlich entspricht Easy Glass® Evo allen geltenden Sicherheitsvorschriften.
Weitere Weltneuheiten Neben der Vorstellung von Easy Glass® Evo präsentiert
Q-railing weitere Weltneuheiten auf der Glasstec 2010. Wie zum Beispiel Ultra
Range, das weltweit erste Geländersystem mit Garantie gegen Korrosion. Hiermit bietet Q-railing ein System, das garantiert auch extremen Umwelteinflüssen
durch z.B. Seewasser oder Chlor widersteht. Ein Meer an Möglichkeiten. Außerdem stellt Q-railing rund 300 weitere neue Produkte vor – darunter 4 neue Easy
Glass® Bodenprofile. Alles in allem Grund genug, dem Stand von Q-railing
einen Besuch abzustatten. Das Q-railing Team steht für alle Fragen zur Verfügung.
Q-railing
Address
Q-railing präsentiert revolutionäres
Glasgeländersystem auf der Glasstec 2010
Auf der internationalen Fachmesse der Glasindustrie vom 28. September bis
zum 1. Oktober 2010 präsentiert Q-railing auf spektakuläre Weise alle seine
Glasgeländersysteme. Auch der brandneue Katalog und der Q-railing OnlineShop werden hier einem breiten Publikum vorgestellt.
glasstec.03.10.03.02.04Metallic tapes
glasstec.21.02
23.08.2010
Q-railing
69
70
Product Overview
Q-railing
Product Overview
Laminated safety glass
glasstec.21.01
Balcony glazing
Product Details
Spandrel panels (general)
glasstec.21.01
glasstec.03.08.01
Structural use of glass
ROBIN SUN
ROBIN SUN
Solarglas
glasstec.03.10.01.01.03Ballustrades
Der Solarglas ist ein Multifunktionsglas konzipiert nach Fachkenntnissen und
Baugewohnheiten von Fenster- und Fassadenherstellern und Installateuren. Der
Solarglas kann mit einem Glas mit Sprossen verglichen werden.
Brackets, fittings and accessories
Die hohe Wärmedämmungskapazität des Solarglass benötigt sehr gut isolierendes Profil aus Holz, PVC oder Aluminium.
glasstec.21.02
Die Gläser werden aus standardmäßig thermisch vorgespanntem EinscheibensicherheitsGlas (ESG) und per Option als VSG geliefert.
glasstec.21.03
Das Gewicht des integrierten Kollektors beträgt ung. 10kg/m² (Extra-Randverklebung
inklusive)
Die minimale Stärke ist 37 mm (4/27/4).
Die Gläser werden nach Kundenmaßen realisiert.
ROBIN SUN
Address
Um eine Verbindung des Kollektors zu ermöglichen, sind nur zwei kleine Löcher
auf einer Seite des Rahmens nötig.
2 rue Fosse des Tailleurs
67000 Strasbourg
France
Phone
+49 785 3173-47
Fax
+33 388 1447-99
Internet address
www.robinsun.com
E-Mail
[email protected]
Stand
Die genaue thermische Berechnung des Solarglass wird von der Firma Robin
Sun erledigt.
Lieferung, Montage des Solarsystems, Verbindung und Dichtigkeitsprüfung wird
von den genehmigten Solarteuren realisiert.
Die Garantiezeit beträgt 5 Jahre für das Glas und 10 Jahre für den Kollektor.
71
72
SGG CLIMAPLUS ONE
SAINT-GOBAIN GLASS Deutschland GmbH
Address
Optimale Wärmedämmung durch ein SGG CLIMAPLUS ONE mit einem UgWert von 1,0 W/m²K im Standardaufbau 4/16/4 mit Argongasfüllung.
Viktoriaallee 3-5
52066 Aachen
Germany
Das Basisprodukt SGG PLANITHERM ONE ist zusätzlich erhältlich als vorgespannte Variante.
SGG CLIMAPLUS RELAX
Phone
+49 241 516-0
Fax
+49 241 516-2224
Im Winter garantiert SGG CLIMAPLUS RELAX eine exzellente Wärmedämmung.
Internet address
www.saint-gobain-glass.com
Im Sommer minimiert SGG CLIMAPLUS die UV-Einstrahlung. Das Sonnenlicht
wird intelligent genutzt, ohne dass sich Räume zu sehr aufheizen.
E-Mail
[email protected]
Stand
Im Frühjahr und Herbst bietet SGG CLIMAPLUS RELAX den optimalen Komfort.
Dank dem aiusgezeichneten ug-Wert 1,1 W/m²K bleibt es an kalten Tagen warm.
An sonnigen Tagen werden durch den niedrigen g-Wert im Vergleich zu anderen
Isolierverglasungen ca. 50% mehr direkte Sonnenwärme ab.
Product Overview
glasstec.21.01
SGG BIOCLEAN
SGG BIOCLEAN - das innovative Leichtpflegeglas mit Selbstreinigungsfunktion. Durch die Beschichtung erhält das Glas hydrophile und photokatalytische Eigenschaften. Die Beschichtung ist fest in die Oberfläche eingebrannt und
besitzt dieselbe Lebensdauer wie das Glas selbst. Die mechanischen, thermischen und akustischen Eigenschaften von SGG BIOCLEAN sind identisch mit
denen herkömmlicher Glasarten. Durch seine besonderen Eigenschaften nutzt
SGG BIOCLEAN die Kombination aus Wasser und UV-Strahlen, um organische
Verunreinigungen deutlicher als bei herkömmlichen Gläsern zu reduzieren und
rückstandslos von der Glas oberfläche abzuwaschen. Das Glas muss damit
nicht nur wesentlich seltener gereinigt werden, der Schmutz haftet auch erheblich schlechter auf der Oberfläche und die Reinigung fällt um ein Vielfaches
leichter aus. Dies spart nicht nur Geld, sondern auch Zeit.
Das Basisprodukt SGG PLANITHERM RELAX ist auch als vorspannbare Variante verfügbar.
SGG CLIMAPLUS ULTRA N
Product Details
glasstec.21.01
Das Wohlfühlglas für alle Jahreszeiten:
73
Die Doppelverglasung mit hoher Wärmedämmung SGG
CLIMAPLUS ULTRA N besteht aus zwei Scheiben, von
denen eine mit einer feinen transparenten Schicht auf
Silberbasis überzogen ist (SGG PLANITHERM ULTRA
N). Sie hält die Wärme in Ihrer Wohnung.
Der Raum zwischen den beiden Glasscheiben enthält
Luft oder ein Gas mit höherer Dämmung, Argon oder Krypton.
Das Basisprodukt SGG PLANITHERM ULTRA N ist auch als vorspannbare Variante verfügbar.
SGG CLIMATOP MAX
Kristallklares Dreifach-Wärmedämmglas für ein MAXIMUM an Lichtdurchlässigkeit, Energieersparnis und Wärmeisolierung. Im Aufbau 4/12/4/12/4 mit Argonfüllung erreicht dieses Isolierglas 0,7 W/m²K (Ug), einen g-Wert von 0,6
sowie eine Lichttransmission T=74%.
74
Das Basisprodukt SGG PLANITHERM MAX ist auch als vorspannbare Variante
erhältlich.
Die Gläser der Produktpalette SGG DECORGLASS tragen dazu bei, individuelle
Räume voller Privatsphäre zu schaffen. Je nach Geschmack und Wunsch in
klassischem, modernen oder avantgardistischem Stil.
SGG COOL- LITE
SGG MIRALITE SOLAR
... ist ein klares, extra weißes oder in der Masse
gefärbtes Floatglas, auf das eine transparente, metallische Schicht aufgetragen wird. Diese Schicht verleiht dem Glas seine Sonnenschutzeigenschaften und
seine besondere Ästhetik. Diese Schicht wird durch
Kathodenzerstäubung unter Vakuum auf eine der Glasseiten aufgteragen. Die beschichteten Gläser ssg COOLLITE umfassen drei Produktgruppen:
SGG MIRALITE SOLAR ist ein flacher und parabolisch geformter Spiegel für
die Solarindustrie. Er kann extremen äußeren Bedingungen widerstehen und
hat eine sehr hohe Reflektivität.
SGG MIRASTAR
- ssg COOL-LITE K und SK bieten einen sehr selektiven Sonnenschutz, sie
lassen ein Maximum an Licht bei einem Minimum an Hitze durch;
- ssg COOL- LITE ST kann vorgespannt und gebogen werden;
SGG MIRASTAR ist ein chromhaltiges Mehrfachschichtsystem. Durch die speziellen
Eigenschaften dieser Schicht ist SGG MIRASTAR korrosionsfest, unempfindlich
gegen Wasserdampf und Reiniger sowie grundsätzlich zu ESG vorspannbar.
Daher eignet sich dieses Produkt problemlos für den Einsatz unter besonderen
Belastungen.
SGG STADIP PROTECT
SGG COOL-LITE XTREME 60/28 ist ein Sonnenschutzglas mit bisher einzigartig hoher Selektivität größer 2. Lichttransmission 60%, Gesamtenergiedurchlassgrad 28%, zudem mit dem Ug-Wert von 1,0 W/m²K bedeutet das: SGG
COOL-LITE XTREME 60/28 ist das derzeit effizienteste Sonnenschutzglas auf
dem Markt.
Bei diesem speziellen VSG bilden zwei oder mehr Floatglas-Scheiben mittels
hochreißfester Polyvinylbutyral-Zwischenschichten (PVB) einen festen, hochwiderstandsfesten Verbund. Das Produkt ist in mehreren Sicherheitsklassen ausführbar: - STADIP PROTECT P-A: durchwurfhemmend nach DIN EN 356 A STADIP PROTECT P-B: durchbruchhemmend nach DIN EN 356 B - STADIP
PROTECT BR: durchschusshemmend nach DIN EN 1036 - STADIP PROTECT
BS: sprengwirkungshemmend nach DIN EN 13541 - STADIP PROTECT EH:
nach VdS-Richtlinien SGG STADIP PROTECT-Scheiben sind von offiziellen Prüfstellen geprüft und zugelassen. Der detaillierte Aufbau des jeweiligen Typen ist
in den Originalzeugnissen der zuständigen Prüfstellen vermerkt.
SGG Decorglass
SGG STADIP SILENCE
- ssg COOL- LITE CLASSIC verbindet Ästhetik und hohen Sonnenschutz.
SGG COOL-LITE XTREME 60/28
Lichtdurchlässigkeit, Sichthemmung, eine Fülle von Strukturen und Farben, Ornamentgläser bieten Raum für neue
Ideen.
SGG DECORGLASS ist eine Produktpalette von klaren
und farbigen Gussgläsern. Bei der Herstellung passiert die
noch flüssige Glasmasse zwei Zylinder, von denen je nach
Motiv einer oder beide mit einem Design graviert sind. Diese Struktur prägt sich
dabei reliefartig in das Glas ein, was dazu führt, daß das Glas mehr oder weniger
undurchsichtig aber dennoch lichtdurchlässig wird.
75
Die Wirkung von diesem exzellenten Schalldämmglas basiert auf einer speziellen
Dreischicht Akustik PVB Folie. SGG STADIP SILENCE bietet nicht nur extrem
guten Schutz gegen UV-Strahlung - fast 99 % der UV Strahlen werden gefiltert
- sondern mindert durch den UV-Filter den Wärmeeintrag durch Sonneneinstrahlung (IR) um fast 40 %. Dieses Schallschutzglas bietet Hochleistungsschallschutz kombiniert mit Sicherheit von Verbundsicherheitsgläsern, mit dem
Aufbau 44.2 erreicht man die Widerstandsklasse EN 356 P2A einer angriffshemmenden Verglasung. Mit experimentellen Nachweis des Pendelschlagversuchs
wird die Klasse 1B1 erreicht. SGG STADIP SILENCE ist auch für den Einsatz als absturzsichernde Verglasung bestens geeignet. Als Dachverglasung
verfügt das Glas über eine hervorragende Tropfschalldämmung und minimiert
wesentlich die Geräusche von auftreffenden Regentropfen.
76
SGG VISION-LITE®
Das Glas mit der Beschichtung SGG VISION-LITE hat die Eigenschaft, die Lichtreflexion auf der Glasoberfläche sehr stark zu reduzieren (weniger als 2%). Um
den Antireflex-Effekt zu erhalten, muss die Verglasung auf beiden Seiten beschichtet
sein. SGG VISION-LITE erhält man durch kathodische Vakuumpulverisierung
transparenter Schichten von Metalloxyden auf dem Glas. SGG VISION-LITE
gibt es als einseitig beschichtetes SEMI-VISION-LITE oder beidseitig beschichtetes
Verbundsicherheitsglas.
Product Overview
Shanghai Pony Technology Co., Ltd.
glasstec.06
Contracting, consulting, engineering, services
glasstec.21.03
SMT Lager- und Transportsysteme GmbH
Address
Syker Str. 205-213
27321 Thedinghausen
Germany
Phone
+49 4204 174795
Fax
+49 4204 174797
Internet address
www.smtlog.de
E-Mail
[email protected]
Stand
Address
No.8, Lane 281, Hong?an Road, Zhujing
201503 Shanghai
China (Rep.)
Phone
+86 21 37284381
Fax
+86 21 64455967
Internet address
www.pony-tech.com
E-Mail
[email protected]
Stand
Company News
09/09/2010
Product Overview
SMT Lager- und Transportsysteme GmbH
glasstec.01.13.02
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
glasstec.21.02
Welcome to Visit Our Booth 13F88
If you are having a float project in view to produce top quality glass, with high
efficiency process line, please visit our booth during the exhibition.Our booth
number is 13F88. Looking Forward to meeting you then!
77
78
Talamoni s.n.c.
Product Overview
Address
Via Menconi, 3
28877 Ornavasso / VB
Italy
Phone
+39 0323 836198
Fax
+39 0323 836900
Internet address
www.talamoni.com
E-Mail
[email protected]
Stand
Company News
08/26/2010
Talamoni s.n.c.
glasstec.01.02.03
Lubricators and coolants
glasstec.04.02
Cutting, grinding and drilling tools
glasstec.21.02
glasstec.21.03
Tekimex International A.p.s.
Address
Baldersbuen 21
2640 Hedehusene
Denmark
Phone
+45 4656 0343
Fax
+45 4656 0523
Internet address
www.tekimex.com
E-Mail
[email protected]
Stand
Hall 10, D37 (Page 92)
Talamoni s.n.c.
NEW TRIANGLE HOLDER WHEEL FOR BEIBUICK
MACHINES
IMPROVEDTOOL HOLDERS
TalamoniTR24BY tool holders.According to the company, based in northern Italy, TR24BY these tool holders, which are used onBiebuick machines, are now
made up of only three parts,and no longer of seven mechanical details.These three parts – two matching triangles and a single screw thus enable to save considerabletime in tool changeover since the triangular support can be easily opened
and closed in a singleoperation, also eliminating the loss of wheels and interchangeable.n
ews
79
80
Company News
Willwin
Address
Handling glass plates and windows can be a back
breaker due to the weight and dimension of the plates
and the uneven grounds of construction sites. The
methods to deliver plates haven’t changed in decades
even with windows now getting heavier and larger.
377 & 362, EPIP, HSIIDC Kundli,
131028 Kundli, Haryana
India
Phone
+91 11 27476666
Fax
+91 130 2219977
Quattrolifts has released the Express, an innovative
small portable lifter that allows one man to move plates
weighing up 80kg or two men up to 150kg. The Express is loaded onto a truck
in two 25kg parts and easily assembled in under a minute.
Internet address
www.willwin.com
Once assembled the Express can unload plates off the truck and then transport the plates and windows on site. The large 330mm pneumatic wheels allow
for travelling over rough grounds on construction sites. The wheelbase can be
adjusted from 54 cm to 80cm allowing for narrow walkways on-site.
E-Mail
[email protected]
Stand
08/30/2010
New One Man Lifter Saves Backs
Two terrific features of the Express allow the lite or window to be rotated 360
degrees and secondly the operator can also index the lite allowing him to move
through standard 90cm wide doorways.
Product Overview
Company News
Willwin
06/23/2010
LAUNCHING A NEW RANGE OF PATCH FITTINGS &
GLASS ACCESSORIES UNDER GLASWORXS BRAND
A NEW INNOVATIVE TECHNOLOGY IN THE RANGE
OF PATCH FITTINGS WITH CLIP-ON TECHNOLOGY
& WITH INTER-CHANGEABLE DESIGNER COVERS
WITH MULTIPLE COLOUR SHADES
glasstec.01.09.01
Transport systems
glasstec.01.13.02
glasstec.01.13.06
glasstec.01.13.07
Vehicles for glass transport
Product Overview
glasstec.04.01.04
Turning aids and lifting tools for glass makers
glasstec.03.10.02.04.01Functional fittings and brackets for facades
glasstec.21.02
glasstec.21.02
glasstec.21.03
81
Willwin
82
chnitten oder Bohrungen möglich. Das System erlaubt die Konfiguration von
Spiegeln, Schiebetüren, Fliesenspiegeln aus Glas und sogar von Duschabtrennungen.
Xavannah dataprocessed engineering, Henner Hucker &
Denis Schmischke GbR
Address
Karl-Oldewurtel-Str. 40
33659 Bielefeld
Germany
Phone
+49 521 987 585 -10
Fax
+49 521 2525-594
Internet address
www.xavannah.de
E-Mail
[email protected]
Stand
Hall 14, A22 (Page 100)
Company News
15.08.2010
Endkunden können so ihre individuelle Lösung einfach und schnell online erstellen und prüfen, ob die Wunschlösung technisch überhaupt machbar ist
und erhalten eine unverbindliche Preisinformation. Je nach Bedarf kann das
Xavannah-System auch maßstabsgerechte CAD-Zeichnungen und Stücklisten
des gewünschten Produktes erstellen und dient so als Schnittstelle zwischen
Endkunde und Glaserei-Fachbetrieb, der die gewünschte Lösung fachgerecht
einbaut.
Der Glasereibetrieb kann diesen Konfigurator ferner als erweiterte „Profiversion“ intern nutzen. Sonderbearbeitungen, Änderungen von Dichtungsprofilen,
Wanneneinrückmaße, Höhenabweichungen und vieles anderes mehr können
zur individuellen Erstellung einer Lösung eingegeben werden. Das Ergebnis
ist in diesem Fall eine komplette Stückliste, einschließlich CAD-Zeichnungen
aller Gläser mit der notwendigen Glasbearbeitung. Die Daten einiger bekannter
Glasbeschlagshersteller sind von Xavannah bereits im System eingepflegt und
können „out of the box“ verwendet werden. Erweiterungen sind stets möglich.
Xavannah dataprocessed engineering, Henner Hucker...
Das System läuft vorzugsweise im Internet oder Intranet, kann zukünftig aber
auch als Offline-Version, zum Beispiel auf einem USB-Stick, verwendet werden.
Xavannah dataprocessed engineering wurde 2008 gegründet. Ein gut ausgebildetes und motiviertes Team, bietet ganzheitliche Lösungen im Bereich eBusiness an. Es hilft bei der Optimierung der Geschäftsprozesse, stellt die hierfür benötigten Hilfsmitteln bereit und unterstützt den späteren Betrieb der ITSysteme. Schwerpunkte der Tätigkeit sind die eigene Softwareentwicklung und
deren Integration im Handwerksbetrieb.
Neu im Glashandwerk: Elektronische
Produktkonfiguratoren optimieren die
Auftragsbearbeitung
Das eBusiness-Systemhaus Xavannah präsentiert auf
der glasstec 2010 in Halle 14, Stand A22 seine neueste
und funktionell erweiterte Generation an Produktkonfiguratoren, die unter anderem in der Glasbranche
Einzug halten.
Internetbasierte Produktkonfiguratoren werden von Endkunden schon lange eifrig genutzt, ob es sich dabei
nun um Pkws oder um Einbauküchen handelt. Dabei
kann der Verbraucher den Preis seiner Wunschzusammenstellung erfahren
oder sich generell über mögliche Lösungen oder Produktkombinationen informieren. In manchen Fällen ist der Konfigurator sogar direkt mit der Kaufmöglichkeit
bzw. einem Shop verknüpft.
Weitere Informationen: Xavannah dataprocessed engineering Henner Hucker
& Denis Schmischke GbR Herr Denis Schmischke Karl-Oldewurtel-Str. 40 D33659 Bielefeld T: +49 521 987 099 8 www.xavannah.de. GLASSTEC Halle 14,
Stand A22
In der Glasbranche allerdings ist die von Xavannah vorgestellte Lösung bisher
einzigartig. Im Gegensatz zu bisherigen Systemen ist mit der XavannahSoftware auch die Auswahl von Sonderwünschen wie Eck- und Randauss-
83
84
Product Overview
Xavannah dataprocessed engineering, Henner Hucker...
glasstec.02.13.02
Software
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.05.04
Software and applications for architects and planners
glasstec.06
Contracting, consulting, engineering, services
glasstec.21.02
glasstec.21.03
85
86
glasstec
Autoglass Arena
FassadenCenter
Hallen/Halls
9–17
Hallen/Halls
9–11
Glasprodukte und Glasanwendungen
Glass products and applications
Hallen/Halls 11–12, 14–17
Glasbearbeitung und-veredelung
Glass processing and snapping technology
Halle/Hall
12
Messtechnik, Steuertechnik,
Regeltechnik, Software
Measurement, testing,
control technology and software
Hallen/Halls
13–16
Glasherstellung, Produktionstechnik
Glass production, production technology
Halle/Hall
14
s larpeq
››
Zusätzliche Aussteller
mit solarpeq Angeboten
in den glasstec-Hallen
In these halls exhibitors
of glasstec with additional
solarpeq products are located
Stand: März 2010 / As of: March 2010
Änderungen vorbehalten / Subject to change.
88
2.1 Hall 09
E22
F37
Talamoni s.n.c.
90
2.2 Hall 10
B62
Willwin
D37
E36
Kuraray Europe GmbH, Division
TROSIFOL
F27
Adler S.A.S.
G45
isophon glas GmbH
G60
Q-railing
H36
92
2.3 Hall 11
B26
SAINT-GOBAIN GLASS
Deutschland GmbH
E05
Consystec GmbH
G81
94
2.4 Hall 12
C25
DIAS Infrared GmbH
96
2.5 Hall 13
C16
SMT Lager- und Transportsysteme
GmbH
C93
F88
Shanghai Pony Technology Co.,
Ltd.
98
2.6 Hall 14
A22
Xavannah dataprocessed
engineering, Henner Hucker &
Denis Schmischke GbR
C41
100
2.7 Hall 15
A13
B42
G41
ABRATECH S.r.l.
102
2.8 Hall 16
A59
104
2.9 Hall 17
B68
106

Personal guide for: Search Criteria:

Transcrição

Documentos relacionados

BEHAVIOR FORMS OF GLASS AND OTHER

MSR radiation-shielding glass | acrylic

PDF Version

2 | Classroom phrases

Whether construction material, protective material

certificate

BUILDING “SCIENCE” TIMELINE THE BUILDING

LEMON COCKTAIL

Thin-glass membranes for quadruple IG-units

Welcome to RUTHMANN