Entwerfen Angewandte Ästhetik Design Studio Applied
Transcrição
Entwerfen Angewandte Ästhetik Design Studio Applied
Ver. 19.09.2016 Entwerfen Angewandte Ästhetik Design Studio Applied Aesthetics UE 253.787, 16/17W, 4.0h, 5.0 ECTS 10.10.2016 Gruppe 1: 15:00-16:00, Gruppe 2: 16:00-17:00 Seminarraum JASEC Einführungsvorlesung Introductory Lecture Anwesenheitspflicht! Compulsory! Da wir bei diesem Entwerfen etwas mehr Platz benötigen, erfolgt nach der Einführung eine Einteilung in zwei Gruppen. Due to the limited space in our seminar room we will divide the participants into two groups after the introduction. 17.10.2016 14:00-17:00 Seminarraum JASEC Gruppe 1: Improvisationsübung Group 1: Improvisation Anwesenheitspflicht Innerhalb von 3h Stunden werden vor Ort in unserem Seminarraum einfache Arbeitsmodelle aus Vorlagen der abstrakten Malerei gebaut, welche die Grundlage für den weiteren Entwurf bilden. Modellbaumaterial mitbringen! Compulsory! Abstract paintings will serve as templates for simple working models which will be built within three hours at this exercise. These models will be the inspirational source for the actual design process. Please bring the necessary model building materials! 7.11.2016 14:00-17:00 Seminarraum JASEC Gruppe 2: Improvisationsübung Group 2: Improvisation Anwesenheitspflicht Innerhalb von 3h Stunden werden vor Ort in unserem Seminarraum einfache Arbeitsmodelle aus Vorlagen der abstrakten Malerei gebaut, welche die Grundlage für den weiteren Entwurf bilden. Modellbaumaterial mitbringen! Compulsory! Abstract paintings will serve as templates for simple working models which will be built within three hours at this exercise. These models will be the inspirational source for the actual design process. Please bring the necessary model building materials! 14.11.2016 Homework Improvisation als Hausaufgabe Improvisation Homework Nach den Erfahrungen bei der betreuten Improvisation, soll ein zweites Modell als Hausaufgabe angefertigt ebenfalls nach den Vorlagen der abstrakten Malerei angefertigt werden. Download Vorlagen: After having experienced the supervised improvisation a second model has to be built as homework. Abstract painting will again serve as the source of inspiration. Download of templates: http://jasec.tuwien.ac.at/fileadmin/t/jasec/DL_AAe_Vorlagen.pdf http://jasec.tuwien.ac.at/fileadmin/t/jasec/DL_AAe_Vorlagen.pdf Sendet Fotos des Modells an: [email protected] Send images of the model to: [email protected] 21.11.2016 14:00-15:30 Seminarraum JASEC Gruppe 1: Vorbesprechung Entwurf Group 1: Consultation design process Anhand der Fotos der beiden Improvisationsmodelle werden wir gemeinsam entscheiden, welches Modell sich für den weiteren Entwurf am besten eignet. On the basis of the photos from both improvisation models we will decide which one is most suitable for the further design process. 21.11.2016 15:30-17:00 Seminarraum JASEC Gruppe 2: Vorbesprechung Entwurf Group 2: Consultation design process Anhand der Fotos der beiden Improvisationsmodelle werden wir gemeinsam entscheiden, welches Modell sich für den weiteren Entwurf am besten eignet. On the basis of the photos from both improvisation models we will decide which one is most suitable for the further design process. Ver. 19.09.2016 28.11. / 5.12. / 12.12. / 9.1. 14:00-17:00 Seminarraum JASEC Korrekturmöglichkeiten Consultations An diesen Terminen steht euch das Betreuerteam zur Verfügung. Zumindest zwei Zwischenkorrekturen sind für den positiven Abschluss notwendig! Für die Korrekturen sind Pläne/Handskizzen und ein Arbeitsmodell mitzubringen. These dates are reserved for consultations with our team of advisors. In order to complete this design studio it is necessary to attend at least two of these appointments. Please bring your plans/sketches and the working model to the consultations. 16.1. 14:00-17:00 Seminarraum JASEC Gruppe 1: Schlusspräsentation Group 1: Final Presentation Anwesenheitspflicht! Ablauf: Jedes Projekt wird mittels Modell und kurzer Beamerpräsentation vorgestellt. Es stehen euch 10 min für diese Präsentation zur Verfügung. Abzugeben ist weiters eine digitale Abgabemappe Format A4, PDF mit kurzer Textbeschreibung, Plänen und Modellfotos. Außerdem sollen alle Projekte auf iRecord hochgeladen werden. Compulsory! Procedure: Each project will be presented by means of a digital presentation (PC and projector are provided) and model. The timeslots are 10 minutes for each participant. Additionally we require digital presentation folder – format A4, PDF with a short text description, plans and model images and the upload to iRecord which is the faculty’s project database. 23.1. 14:00-17:00 Seminarraum JASEC Gruppe 2: Schlusspräsentation Group 2: Final Presentation Anwesenheitspflicht! Ablauf: Jedes Projekt wird mittels Modell und kurzer Beamerpräsentation vorgestellt. Es stehen euch 10 min für diese Präsentation zur Verfügung. Abzugeben ist weiters eine digitale Abgabemappe Format A4, PDF mit kurzer Textbeschreibung, Plänen und Modellfotos. Außerdem sollen alle Projekte auf iRecord hochgeladen werden. Compulsory! Procedure: Each project will be presented by means of a digital presentation (PC and projector are provided) and model. The timeslots are 10 minutes for each participant. Additionally we require digital presentation folder – format A4, PDF with a short text description, plans and model images and the upload to iRecord which is the faculty’s project database. Seminarraum JASEC Gußhausstraße 30, EG/Ground floor erste Türe rechts in der Hofeinfahrt / first door on the left in the driveway to the inner courtyard Contact: Thomas Rief [email protected] Digital version: http://jasec.tuwien.ac.at Ver. 19.09.2016 Teilnahmevoraussetzungen & Beurteilung Anmeldung: Ausschließlich über den Bewerbungspool am Dekanat. Wir nehmen keine sonstigen Anmeldungen per Email, Telefon oder persönlich an, da wir die Zulassungsvoraussetzungen für das Master-Entwerfen nicht überprüfen können. Anwesenheitspflicht: Die persönliche Anwesenheit zur Einführungsveranstaltung, sowie zu anwesenheitspflichtigen Terminen ist Voraussetzung für eine positive Beurteilung. Des Weiteren ist eine Anwesenheit bei 50% der übrigen Korrekturen notwendig, um positiv abzuschließen. TeilnehmerInnen, die diese Anwesenheitspflicht nicht einhalten, werden ohne Ausnahmen automatisch negativ beurteilt. Hierbei ist der Grund der Abwesenheit (Krankheit, berufliche Verhinderung etc.) nicht relevant. Beurteilungskriterien: Entwurfsqualität, Modellbauqualität, Präsentationstechnik Requirements for attending the course & evaluation Registration: Registration to this course only via the faculty’s Pool Application system. We do not accept any other applications via email, phone or personally. The reason for this strict procedure is that we are unable to check each candidate’s eligibility to participate. Compulsory attendance: Personal attendance to appointments marked with „compulsory“ is required for a positive evaluation. Additionally personal attendance at 50% of the regular consultations is required for a positive mark. Participants who do not fulfill the required attendance will automatically receive a negative evaluation without any exceptions. The reason for absence (illness etc.) is not relevant. Evaluation criteria: Quality of design, quality of the models, quality of presentation