HCU35GSM Module - Technic Gerätebau GmbH
Transcrição
HCU35GSM Module - Technic Gerätebau GmbH
HCU35 GSM Module HCU35 GSM Module HCU35 GSM Module This stand alone unit consists of a driving section for direct actuation of controllers and a GSM data transmitter (Siemens TC35 / MC35). Several additional functions make the unit very flexible and suitable for a wide range of applications. For instance in the detection of gate trespassing it would be possible to avoid calls or SMS messages generated by entries and actuate instead a specific function (warning, alarm, time-out etc) for every digital output, Therefore the unit can be employed for: driving of actuators for alarms, barriers, doors, lighting and heating equipments etc. remote control and programming of surveillance equipment peripheral data programming acquisition and transmission peripheral data acquisition data transmission and remote programming etc. Specification: - Dimensions: - Power Supply: 12 – 30V DC, 10VA - Hardware Features and Interfaces: o o o o o o o o o o o o 100 x 120mm - for snap rail mounting 100 x 160mm - for 19“ insertion Atmega128 (128k Flash, 4k EEPROM, 4k SRAM, 32k ext. SRAM) RS232 4 digital inputs – voltage free contacts 4 digital outputs, 5 – 24V DC, 0.5A SPI-Interface expansion – up to 15 SPI/DIO-modules, each 8 IN/8OUT Serial-Flash-Memory up to 64 MBit TWI interface Program interface 3 state LED´s Real Time Clock SIM card holder Connector for GSM-antenna Interface for Siemens TC35 / MC35 Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 2 / 9 HCU35 GSM Module - Operation Features: Direct data connection from and to HCU 35 allows transmission of a large amount of data without use of SMS, which is normally reduced by the transmission rate of the SIM card. Optional GPRS - service can be used. Local (through RS232 interface) and remote (by modem) programming Data transmission and programming password controlled Battery powered internal clock which also allows automatic insertion of winter/summer time and fixed and variable holidays o Inputs: Changing state of an input allows dialing a phone number or alternatively transmitting a SMS, according to the configuration Each input can be programmed for Dial a programmed phone number Type of call (direct call or SMS sending) Alarm level (alarm clearing at high or low input setting) Alarm time (time to activate the alarm) Daily alarm test time (direct call or SMS transmission) Call duration SMS text (up to 60 characters) Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 3 / 9 HCU35 GSM Module o Outputs: Each output can be programmed for different functions • • • • • Pulse Output ON for about 2 sec, if the module is called by one of up to 50 registered phone numbers Pre-selection Output ON/OFF pre-setting of a time period (date and time) programmed by SMS or PC – local or remote Direct Function SET or RESET an output by means of SMS or PC – local or remote Alarm Function Activating an output, if the module is called by a special phone number; cancelling alarm by SMS Clock Relay Function 2 periods per week day (fixed and variable holidays are handled as Sundays) - presetting by PC – local or remote Additional functions on request All SMS actuations are controlled by password In Use as: - Alarm system Remote control (traffic signs on highways, borders-, doors-, heating or light control of weekend houses, weather stations, lower safety relevant equipment on railways, ...) Control and update of remote systems Data collection and transmission for distributed systems Data logger Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 4 / 9 HCU35 GSM Module SPI/DIO Digital IO Module This is a very compact digital I/O module with 8 inputs and 8 outputs which can be driven by a serial peripheral interface (SPI). Alternatively the SPI/DIO can work as stand alone unit for small loads. Each input or output can be singularly and independently powered or have a common power source. Driving of inductive loads like relays is diode protected. Technical Data Dimensions 75 x 105 mm Voltage Supply 5 V DC Hardware Features/Interfaces MP – Controlled SPI (Serial Peripheral Interface) 8 Inputs voltage rating 12 to 24 V DC voltage free 8 Outputs voltage rating 12 to 24 V DC voltage free permanently short circuit protected up to 500 mA load Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 5 / 9 HCU35 GSM Module HCU35-MMI PC - Control Screenshots of PARAMETER Setting: Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 6 / 9 HCU35 GSM Module System Test screen: Alarm Registration: Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 7 / 9 HCU35 GSM Module Online binding: Password input: Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 8 / 9 HCU35 GSM Module Technic Gerätebau GmbH, Anton-Rauch-Straße 8c, A – 6020 Innsbruck, +43 / 512 / 26 75 16 www.technic-gmbh.at [email protected] Seite 9 / 9