General Mooring Buoys Catalogue

Aids to Navigation
ROTOMOULDED HULL
BALIZAMAR MOORING BUOYS
Balizamar mooring buoys are designed with a galvanized steel structure and a rotomoulded polyethylene
hull. The hot dip galvanized steel
structure has a 200mm central tube
that passes through the hull, transmitting the loads from the mooring
point to the mooring.
The single hull is made of rotomoulded polyethylene filled of expanded
polystyrene foam, ensuring its buoyancy even if the outer skin has been
broken.
The buoy can be configured with one
of the four mooring designs available (shown on the following page) to
suit customer’s requirements.
APPLICATIONS
• Mooring of vessels
• Supporting floating cages and
containment booms used in
aquaculture
©2015 ALMARIN www.almarin.es
CHARACTERISTICS AND ADVANTAGES
Strength
Galvanized steel structure with 12.000 kg SWL
Safety
Rotomoulded hull filled with closed cell PS foam ensures
floatation in case of breached skin
Lantern
Option of including a self contained lantern
Versatility
Four mooring designs available
Volumes from 700 litres to 2500 litres
Manufacturing
Designed and built to ISO 9001, ISO 14001
Service
Technical assistance provided by our staff to choose the
most suitable buoy
SPECIFICATIONS AND CHARACTERISTICS*
Models
B1250M
B1600M
C1250M
C1600M
SWL
12.000 kg
12.000 kg
12.000 kg
12.000 kg
Hull volume
721 litres
1233 litres
1673 litres
2612 litres
Net Buoyancy
572 kg
1052 kg
1475 kg
2362 kg
* Approximate specifications subject to change without notice
ENVIRONMENT & QUALITY
CONSTRUCTION
Hull
Rotomoulded medium density pigmented polyethylene with a maximum strength UV inhibitor filled with expanded PS. Water resistant up
to 100ºC, resistant to most acids and common solvents
Galvanization
All the carbon steel components are hot dip galvanized in accordance
with standard ISO 1461:1999
Colour
Yellow, red, green, black
Recycling
All the buoy components are easily recycled with a direct re-use rate
nearing 100%
Manufacturer certificate
ISO 9001:2008 and ISO 14001:2004, IALA Industrial Member
Hull
Rotomoulded MDPE thyroid filled with expanded polystyrene.
8-12mm minimum hull outer skin thickness
Structure
Single tube that passes through the centre of the hull. Mooring
eye on its lower side and a centre plate that transfers the loads to
the hull. Manufactured using ST 37 steel and subsequently hot dip
galvanized. Option of 4 mooring designs (see below). All solutions
are calculated for 12.000 kg SWL considering a factor of safety of 2
Screws
Stainless steel A2. Self-locking nuts
TRATAMENTO
Material Galvanizado:
a) Toda a estrutura deverá ser obrig
galvanizada de acordo com a Norma
(Cobertura de galvanização > 90 mic
Material Metalizado:
a) Decapagem será feita com jacto
granalha de aço) ao grau SA 2 1/2
Sueca aplicável.
b) Metalização das superfícies será
de zinco a quente sobre as superfí
decapadas, devendo ficar com um
80 microns.
PINTURA
Preparação de Super
Material em Inox:
- As superficies devem ser bem lim
- Foscar a jacto abrasivo não metál
decapagem de inox para obter um p
média na ordem do 40/50 microns R
Material em Galvanizado:
- Retirar excesso de galvanização
- Desengorduramento e limpeza das
- Despolimento por lixagem
- Perfil de rugosidade média na orde
Acabamento
OPÇÃO 1:
- 1 Demão de primário epóxido de a
15553 - 50µm
-2 Demãos de acabamento poliureta
HEMPATHANE ENAMEL 55100 - 2x
OPÇÃO 2:
- 2 Demão de primário epóxido de a
15553 - 75µm
-2 Demãos de acabamento poliureta
POLYENAMEL 55102 - 2x40 µm
Branco - RAL 9003
Preto
- RAL 9005
Vermelho - RAL 3020
Ver
Am
Cin
SOLDADUR
1) Todas as ligações metálicas de
através de cordões de soldadura
contacto entre peças, à excepção
com parafusos;
2) A espessura do cordão de solda
pela menor espessura dos elemen
3) Cotas em milimetros (mm);
ALTERAÇÕES
REV.
REVIU
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DATA
-
-
REQUERENTE
Reque
TITULO
Titu
NOME DO PROJECTO
Nome do Projecto
PROJECTOU
Projectou
NOME DWG
Draw1
Each model of buoy is available with
four mooring options: chain through,
shackle, T-head and trident.
DESENHOU
Desenhou
1
FASE
Fase
REFERÊNCIA
AHLERS LINDLEY,
Edifício MICAL 1896
2645-550 Alcabideche
T.: +351 214 692
[email protected] • www
PR.23.R0
De acordo com DL 36/2003 5/3, a Ahlers Lindley
sobre a informação contida no desenho, não
utilizada para fabricação ou para outros fins
©2015 ALMARIN EQUIPOS Y SERVICIOS PORTUARIOS, SL
C/ Costa Brava, 25-29. Local nº 10 | 08030 Barcelona
T +34 933 601 101 | F +34 933 601 102 | E [email protected] | www.almarin.es