54450 EN
Transcrição
54450 EN
TECHNICAL DATASHEET 54-450 C-CRYL S450 MIO Acrylic enamel pigmented with micaceous iron oxide Revision: February 2016 DESCRIPTION C-Cryl S450 Mio is an acrylic enamel pigmented with micaceous iron oxide. Its main properties are: - Satin acrylic top coat enamel. High film thickness per coat. Easy to apply and fast drying. No maximum repainting interval. Fireproof. Topcoat for intumescent systems. “Forge” aspect. MAIN APPLICATIONS Micaceous iron oxide enamel recommended for the maintenance of metallic structures in industrial installations, pipe work, buildings, etc in paint systems designed for the protection of substrates and surfaces. PROPERTIES Finish Satin Colour Z294, Z297 (other colours available in ICS) Components 1 Volume solids 53% (ISO 3233) Slight variations ±3% may occur due to colour and testing variances. Referred to Z294 colour Specific gravity 1,34 ± 0,02 g/mL Recommended dry film thickness 80 – 100 µm per coat Nº of coats 1–2 Only can obtain 100 µm of thickness in applications with airless pulverisation. In applications with brush and roller thinned at 10%, it’s possible to achieve a thickness of 40 µm. Apply two coats in brush and roller applications. Application method Conventional and airless spray, brush and roller To achieve “forge” aspect and film uniformity, it is recommended applications with airless or conventional spray. Theoretical coverage 6.6m²/l at 80 µm Allow for application losses, surface irregularities, etc. 1/4 We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and conditions of sales that we advise should be read carefully. CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936 CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583 Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22 Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14 CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033 Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976 TECHNICAL DATASHEET 54-450 C-CRYL S450 MIO Acrylic enamel pigmented with micaceous iron oxide Revision: February 2016 Drying time At 20ºC : Dry to touch: Dry trough Recoat: 1 – 2 hours 4 hours Min.: 16 hours – Max: Unlimited Drying times depend on temperature, ventilation and film thickness. PAINT SYSTEM Steel Primers: C-Therm Primer S450, C-Pox Primer ZN800, C-Pox Primer ZP150, C-Pox ST 180 AL and other recommended primers. Can also be used with epoxy intermediate coats such as C-Pox S100, C-pox S140 MIO FD. Can also be used as a top coat for solvent based intumescent paint systems. Concrete: Apply a first coat with a maximum thinning of 10% with CP-20. Apply 1 – 2 coats, depending on support absorption, with a recommended thinning of 5% with CP-20. SURFACE PREPARATION Steel: Coating performance is proportional to the degree of surface preparation. Refer to application instructions for specific primers being used. Before topcoat, the previous coat, must be clean, dry and exempt from any contaminant including salt deposits. Concrete The surface must be clean, dry and with sufficient roughness, achieved by use of diamond sander or shot blasting. If a concrete hardener has been used, this must be completely removed mechanically or with an acid solution, to achieve satisfactory adhesion. In these cases it is recommended a blast steel, high pressure water jet or acid solution followed with a clean with water and dry according each compound. Coated surfaces with this product – Clean with high pressure water jet and remove old paint without good adhesion. 2/4 We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and conditions of sales that we advise should be read carefully. CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936 CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583 Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22 Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14 CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033 Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976 TECHNICAL DATASHEET 54-450 C-CRYL S450 MIO Acrylic enamel pigmented with micaceous iron oxide Revision: February 2016 APPLICATION In closed areas there must be good ventilation during application and drying so that the solvents can evaporate. Environemental application and drying conditions: Temperature 5 - 45ºC Relative humidity < 85% Minimum surface temperature 3ºC above dew point Application equipment Conventional spray Fluid tip orifice size Air pressure Paint pressure Thinning Recommended 0.055 – 0.070 inches (1,39 – 1,77 mm) 2 3.5 – 5.3 kg/cm 2 0.7 – 1.4 kg/cm 5 – 10% Airless spray Fluid tip orifice size Compression ratio Working pressure Thinning Recommended 0.021 inches (0,53 mm) 64 : 1 2 160 - 180 kg/cm 0% Brush/Roller Thinning 0 - 5% Thinner: 7Q-240.0000 (CP-20); Cleaning thinner: 7Q-240.0000 (CP-20) ADDITIONAL INFORMATION Drying mechanism – By solvent evaporation. Volatile Organic Compounds (COV) EU limit for this product (cat. A/j): 500 g/L This product contains max. 494g/L COV. *) Supplying form: < 457 g/L *) The VOC value shown above refers to a ready for use product, as tinted, thinned, etc in accordance with our recommendations. We are not responsible for products obtained by mixing products with are different from those we have recommended and we must draw attention to the responsibility of anyone involved within the supply chain not to infringe Directive 2004/12/CE. Flashpoint (Closed container) Product 24ºC Thinner 31ºC Cleaner 31ºC Supply form Product 20 and 4 L Shelf life 1 year, when stored in original containers, indoors, between 5 and 40ºC. 3/4 We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and conditions of sales that we advise should be read carefully. CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936 CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583 Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22 Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14 CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033 Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976 TECHNICAL DATASHEET 54-450 C-CRYL S450 MIO Acrylic enamel pigmented with micaceous iron oxide Revision: February 2016 APPROVALS AND CERTIFICATES C-Cryl S450 MIO is certified with Fire Reaction: Bs1d0 classification according to European standard EN 13501-1:2002. Corrosivity category C2 according to EN ISO 12944-6, high durability of painting system: Cinonic Primer C-Cryl S450 MIO 40 µm 80 µm OBSERVATIONS Only can achieve a “forge” aspect applying this product with conventional spray. HEALTH, SAFETY AND THE ENVIRONMENT In general, avoid contact with the eyes and skin; gloves, goggles and appropriate clothing should be worn. Keep out of the reach of children. Use only in well ventilated areas. Do not empty into drains. Keep the container properly sealed and stored in the correct place. Take correct measures when transporting the product so as to avoid any accidents that could rupture the can or cause damage to the packaging. Ensure that the container is correctly stacked in a safe area. Do not store or use the product in extreme temperature conditions. For more information it is essential to read the label on the container and the product MATERIAL SAFETY DATA SHEET of this product, its components and all complementary products referred on Technical Data Sheet. 4/4 We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and conditions of sales that we advise should be read carefully. CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936 CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583 Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22 Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14 CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033 Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976
Documentos relacionados
7A230 EN
We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the re...
Leia mais54400 EN
CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barce...
Leia mais7L990 EN
We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the specifications as detailed in the re...
Leia mais