combiloop - Müller Hydraulik
Transcrição
combiloop - Müller Hydraulik
combiloop ® Improve your efficiency and sales potentials with combiloop. Our professional high-pressure unit for cooling lubricants – combiloop – and your internally cooled tools are a perfect match. An innovative filter technology guarantees ideal cleaning of the cooling lubricant. The result: your ability to create unique high pressure (up to 210 bar) for your metal-cutting tools. // combiloop CL1 // combiloop CL2 // combiloop CL3 The start-up solution with 4 service connections generating pressure up to 70 bar. The efficient solution for a permanent usage thanks to our innovative 3-chamber tank system. The powerhouse for non-stop operations with 8 service-connections and pressure up to 150 (210) bar. Depending on model: driving power 1.5 – 5.5 kW // conveying capacity 9 –30 l/min // filter fineness 60 –25 µm // self-cleaning automatic filter (optional) Enhance your competitive position! // Improved tool life // Higher quality and increased productivity // Perfect use of space in manufacturing // Deep hole drilling in-house // Reduced energy demand Müller Hydraulik GmbH Robert-Bosch-Strasse 16 D - 78667 Villingendorf Tel +49 (0)741-174 575-0 Fax +49 (0)741-174 575-299 [email protected] www.muellerhydraulik.de 99-04-0002 // Up to 5-digit cost reduction What are the benefits of drilling, turning or milling with combiloop? // Benefits Pressure range (bar) combiloop CL1 //High-pressure ≤70 bar //1–4 service connections combiloop CL2 //High-pressure ≤70 bar //1–8 service connections combiloop CL3 //High-pressure ≤150 bar //1–8 service connections //Automatic filter (option) combiloop CL3+ //High-pressure ≤210 bar //1–8 service connections //Automatic filter (option) // combiloop cleans the cooling lubricant // combiloop improves cooling and lubrication 0 – 30 // combiloop immediately and accurately removes chips produced by drilling, turning and milling // combiloop breaks chips in good time and thus eliminates ribbon, snarl and spiral chips // Drilling without cleaning up becomes a reality // Drilling deep holes ø <10 mm at one time possible (using a drill with internal cooling) 30 – 70 // Two- or three-shift operation without any difficulty // Perfect machining of aluminium, stainless steel and titanium // Drilling deep holes ø <5 mm at one time possible (using a drill with internal cooling) // Drilling deep holes ø <2 mm at one time possible (using a drill with internal cooling) 70 – 150 150 – 210 combiloop is particularly suitable as original equipment or for retrofitting long and short automatic turning lathes, machining centres and multi-spindle automatic lathes of the following manufacturers: Citizen // Ergomat // Gildemeister // Index // Maier // Manurhin // Mazak // müga Müller KBS // Nakamura // Nexturn // Pfiffner // Schütte // Spinner // Star Without combiloop With combiloop Pressures below 30 bar do not break chips. The drawbacks: scrapers frequently appear on the workpiece and the pan is full of stringy chips. These also adhere to the turret, tool and workpiece. Pressures widely above 30 bar break chips to small pieces. The benefits: Machining area and pick-off spindle remain chip-free. Moreover, short chips are easy to filter out in automatic equipment. References: Manufacturers: Citizen // Manurhin // Traub // Index // Miyano // Tornos // Star // EMAG // Pfiffner müga // Müller KBS // Nexturn ... and others. Users: Robert Bosch GmbH, Bamberg // AEG // Ganter Feinmechanik, Dauchingen // Mayenberger, Rottweil // Schuler, Gosheim // Braunschweiger, Gosheim // Rahm, Betzweiler // Zisterer, Gosheim WSD Krauss, Villingen-Schwenningen // Leipold, Wolfach // TRINON Titanium, Karlsruhe // DeguDent, Frankfurt Stiehler, Lengede // Freund Drehtechnik, Lüdenscheid // Ventrex Automotive, Graz ... and others.