c.LOGiC-Interface C2-LR-R für Landrover Touch-Screen
Transcrição
c.LOGiC-Interface C2-LR-R für Landrover Touch-Screen
c.LOGiC-Interface C2-LR-R für Landrover Touch-Screen Navigationssysteme (Nur für den Gebrauch OHNE Werks-Rückfahrkamera) Produktfeatures • Plug and play Multimedia Interface • 2 AV-Eingänge mit separaten IR-Steuerkanälen • Optionale Steuerung von After-Market Geräten (z.B. DVD-Player, DVD-Wechsler, USB/iPod Geräte, …) über Werks-Navigationstasten • After-Market Rückfahrkamera-Eingang • Automatische Umschaltung auf After-Market Rückfahrkamera-Eingang (nur aus dem Interface-Modus) • Rückfahrkamerastromversorgungsausgang (+12V max 1A) • Rear-Seat-Entertainment Video-Ausgang • Schaltausgang(+12V max 1A) für angeschlossene Geräte • TV-Freischaltungsfunktion Version 23.08.2010 C2-LR-R Inhaltsverzeichnis 1. Vor der Installation 1.1. 1.2. 1.3. 1.4. 1.4.1. 1.4.1.1. Lieferumfang Überprüfung der Kompatibilität mit Fahrzeug und Zubehör Einstellen der Dip-Schalter der CAN-Box TV-400-R Einstellen der Dip-Schalter der MOST®-Box C2C-M315 Automatische Umschaltung auf eine Rückfahrkamera Deaktivierung des c.LOGiC AV2-Eingangs 2. Anschluss Schema 3. Installation 3.1. 3.2. 3.3. 3.3.1. 3.3.2. 3.3.3. 3.3.3.1. 3.4. Verbindung MOST®-Box , CAN-Box und Kabelsätze Verbindungen zur Werks-Navigation Anschluss von Peripheriegeräten AV-Quelle(n) Installation zusätzlicher IR-Sensor der AV-Quelle After-Market Rückfahrkamera After-Market Rear-Seat-Entertainment Aktivierung der Steuerungsfunktionen 4. Bedienung 4.1. 4.2. 4.3. 4.4. 4.5. Aktivierung der TV-Freischaltungsfunktion c.LOGiC als aktuelle AV-Quelle anwählen Umschalten zwischen AV1 und AV2 Gerätesteuerungsebenen belegen Belegungstabelle 5. Technische Daten 6. Technischer Support Seite 1 Anhang A – Gerätesteuerungstabelle Version 23.08.2010 C2-LR-R Rechtlicher Hinweis Der Fahrer darf weder direkt noch indirekt durch bewegte Bilder während der Fahrt abgelenkt werden. In den meisten Ländern/Staaten ist dieses gesetzlich verboten. Wir schließen daher jede Haftung für Sach- und Personenschäden aus, die mittelbar sowie unmittelbar durch den Einbau sowie Betrieb dieses Produkts verursacht wurden. Dieses Produkt ist, neben dem Betrieb im Stand, lediglich gedacht zur Darstellung stehender Menüs (z.B. MP3 Menü von DVD-Playern) oder Bilder der Rückfahrkamera während der Fahrt. Veränderungen/Updates der Fahrzeugsoftware können die Funktionsfähigkeit des Interface beeinträchtigen. Softwareupdates für unsere Interfaces werden Kunden bis zu einem Jahr nach Erwerb des Interface kostenlos gewährt. Zum Update muss das Interface frei eingeschickt werden. Kosten für Ein- und Ausbau werden nicht erstattet. 1. Vor der Installation Vor der Installation sollte dieses Manual durchgelesen werden. Für die Installation sind Fachkenntnisse notwendig. Der Installationsort muss so gewählt werden, dass die Produkte weder Feuchtigkeit noch Hitze ausgesetzt sind. 1.1. Lieferumfang SW-Stand und HW-Stand der Interface-Boxen notieren. Manual aufbewahren für Support-Zwecke! MOST®-Box C2C-M315 HW_____ SW_____ CAN-Box TV-400 R HW_____ SW _____ Kabelsatz C3C-LR Kabelsatz C2C-IR Wenn die Fernbedienung für die angeschlossenen Geräte genutzt werden soll, werden AV-Quelle(n). Seite 2 zusätzliche IR-Steuerkabel und Y-Adapter benötigt, siehe Kapitel Version 23.08.2010 C2-LR-R 1.2. Überprüfung der Kompatibilität mit Fahrzeug und Zubehör Voraussetzungen Fahrzeug Range Rover (Vogue), Range Rover Sport, Discovery3 Nur Fahrzeuge ohne Rückfahrkamera Navigation Touch-Screen Navigation (Model seit 2009) Einschränkungen Werks-TV-Tuner Darf NICHT installiert sein. Der Lichtwellenleiterring muss geschlossen sein, wenn deinstalliert. After-Market Rückfahrkamera Automatische Umschaltung auf die Kamera funktioniert nur im c.LOGiC-Modus. 1.3. Einstellen der Dip-Schalter der CAN-Box TV-400-R Alle Fahrzeuge 1.4. Dip 1 ON, Dip 2 ON, Dip 3 ON Einstellen der Dip-Schalter der MOST®-Box C2C-M315 Die Werkseinstellung der DIP-Schalter der MOST®-Box müssen nur verändert werden, wenn eine After-Market Rückfahrkamera angeschlossen werden soll oder der AV2 des c.LOGiC deaktiviert werden soll. Die DIP-Schalter befinden sich innerhalb der MOST®-Box . Für Änderungen ist es notwendig, die Box zu öffnen. Die Werkseinstellung ist: Dip1 = ON, dip2 = OFF, dip3 = OFF 1.4.1. Automatische Umschaltung auf eine After-Market Rückfahrkamera Wenn eine After-Market-Rückfahrkamera angeschlossen werden soll, Dip 2 auf ON (oben) schalten. Seite 3 Hinweis: Die automatische Umschaltung einer After-Market Kamera funktioniert nur im c.LOGiC Modus. Version 23.08.2010 C2-LR-R 1.4.2. Deaktivierung des c.LOGiC AV2-Eingangs Wenn nur eine AV-Quelle an das c.LOGiC angeschlossen werden soll, wird empfohlen, den AV2-Eingang auszuschalten, um zu vermeiden, dass der Kunde durch Umschalten aus Versehen ein schwarzes/kein Bild hat. Um den AV2 Eingang des c.LOGiC zu deaktivieren, Dip1 auf OFF (unten) schalten. Seite 4 2. Anschluss Schema Version 23.08.2010 C2-LR-R 3. Installation Zündung ausstellen und Fahrzeugbatterie nach Werksangaben abklemmen! Darf gemäß Werksangaben die Fahrzeugbatterie nicht abgeklemmt werden, reicht es in den meisten Fällen aus, das Fahrzeug in den Sleep-Modus zu versetzen. Sollte dieses nicht funktionieren, kann die Fahrzeugbatterie mit einer Widerstandsleitung abgeklemmt werden. Installationsort ist hinter dem Werksnavigationsmonitor und auf der Rückseite des Radiomoduls. Im Range Rover (Vogue) ist das Radiomodul eine versteckte Box hinter dem Handschuhfach. 3.1. Verbindung MOST®-Box , CAN-Box und Kabelsätze Kabelsatz C2C-IR mit 4-Pin Molex der MOST®-Box C2C-M315 verbinden. Kabelsatz C3C-LR mit 8-Pin Molex der CAN-Box TV-400-R verbinden. Kabelsatz C3C-LR mit 14-Pin Molex der MOST®-Box C2C-M315 verbinden. Seite 5 MOST®-Stecker des C3C-LR mit MOST®-Buchse der MOST®-Box C2C-M315 verbinden. Version 23.08.2010 C2-LR-R 3.2. Verbindungen der Werks-Navigation Der Zugang zur Rückseite des Werksnavigationsmonitors und zur Rückseite des Werksnavigationsradios ist notwendig. Den MOST®-Stecker des Fahrzeug-Kabelbaums auf der Rückseite des Radiomoduls abstecken und mit dem Kabelsatz C3C-LR verbinden. Die Systembuchse des Fahrzeug-Kabelbaums auf der Rückseit des Radiomoduls abstecken und mit dem Kabelsatz C3C-LR verbinden. Die Systembuchse des C3C-LR mit dem Stecker des Radiomoduls verbinden. Den MOST®-Stecker des C3C-LR mit der MOST®-Buchse des Radiomoduls verbinden.. Die Fakra-Buchse des C3C-LR mit dem Fakra-Stecker des Monitors verbinden. 3.3. Anschluss von Peripheriegeräten Es ist möglich, bis zu 2 After-Market AV-Quellen, After-Market Rückfahrkamera und RearSeat-Entertainment an das c.LOGiC Interface anzuschließen. Seite 6 Vor der endgültigen Installation der Peripheriegeräte empfehlen wir einen Testlauf der c.LOGiC-Funktionen, um eine Inkompatibilität mit Fahrzeug, Navigation, Werkszubehör oder Peripheriegeräten frühestmöglich zu erkennen. Version 23.08.2010 C2-LR-R 3.3.1. AV-Quelle (n) Das c.LOGiC Interface hat die Möglichkeit, bis zu 2 vorprogrammierte Geräte anzuschließen und über die Navigationstasten zu steuern. Die Geräteliste in der Gerätesteuerungstabelle (Anhang A) zeigt die vorprogrammierten Steuerkanäle und die gerätespezifischen IRSteuerkabel STA-xxx, die separat für jedes zu steuernde Gerät bestellt werden müssen. Mit entsprechendem STA-xxx IR-Steuerkabel, die blaue (gelbe) 3-Pin AMP Buchse des Kabelsatzes C2C-IR und den IR-Port der AV-Quelle 1 (AV-Quelle 2) verbinden. Mit Cinch-Leitungen, die Cinch-Buchsen AV1 (AV2) der MOST®-Box C2C-M315 mit dem AV-Ausgang der AV-Quelle 1 (AV-Quelle 2) verbinden. Seite 7 Das rosa ACC-Ausgangskabel (+12V max 1A) des Kabelsatzes C3C-LR kann mit den ACC-Schalteingängen der angeschlossenen Geräte verbunden werden, um diese einzuschalten. Es liegen +12V an, sobald das Navigationssystem eingeschaltet ist. Version 23.08.2010 C2-LR-R 3.3.2. Installation zusätzlicher IR-Sensor der AV-Quelle Es besteht zusätzlich zur Gerätesteuerung über die Navigation die Möglichkeit, den Original IR-Sensor des angeschlossenen Gerätes zu installieren. Über einen Y-Adapter (z.B. STAY35MM oder STA-RJ12) für den IR-Port des angeschlossenen Gerätes kann sowohl der c.LOGiC, als auch der IR-Sensor des Gerätes angeschlossen werden. Die Installation eines zusätzlichen IR-Sensors empfiehlt sich, da über die Navigationstasten nur die wichtigsten Funktionen bedient werden können. 3.3.3. After-Market Rückfahrkamera Den Video-Cinch der After-Market Rückfahrkamera mit der Cinch-Buchse R-CAM-IN der MOST®-Box C2C-M315 verbinden. Das grüne Kabel des Kabelsatzes C3C-LR mit dem Stromanschluss der Kamera verbinden (max. 1A). Das grüne Kabel führt Strom (+12V), wenn der Rückwärtsgang eingelegt ist. Seite 8 Hinweis: Die automatische Umschaltung auf den Kamera-Eingang, wenn der Rückwärtsgang eingelegt ist, funktioniert nur im c.LOGiC-Modus. Version 23.08.2010 C2-LR-R 3.3.4. After-Market Rear-Seat-Entertainment Mittels Cinch-Kabel, das Rear-Seat-Entertainment mit der Cinch-Buchse VIDEO OUT der MOST®-Box C2C-M315 verbinden. Hinweis: Da der Ausgang vollwertig ist, d.h. das Video-Signal nicht mit dem für das Navigationssystem geteilt wird, kann die Aufteilung des Video-Signals mit einem Cinch-Y-Kabel ein ausreichend gutes Bild für zwei Rear-Seat-Entertainment-Monitore ergeben. Wenn nicht, oder wenn mehr als zwei Monitore angeschlossen werden, muss ein Video-Signalverteiler verwendet werden. 3.4. Aktivierung der Steuerungsfunktionen Um die Steuerungsfunktionen zu aktivieren, muss der folgende Ablauf nach der Installation durchgeführt werden: - TV im Navigationshauptmenü auswählen TV-Ebenen Menü öffnen (Bild 1) TV auswählen (Systemformat Menü) PAL B/G auswählen Das Systemformat-Menü mit verlassen Seite 9 Hinweis: Nach Unterbrechung der Fahrzeugstromversorgung muss die Aktivierung wiederholt werden. Version 23.08.2010 C2-LR-R 4. Bedienung 4.1. Aktivierung der TV-Freischaltungsfunktion Die TV-Freischaltungsfunktion ist dauerhaft aktiviert, ohne die Navigationsleistung zu beeinträchtigen. 4.2. c.LOGiC als aktuelle AV-Quelle anwählen Im Hauptmenü der Navigation TV auswählen, um den c.LOGiC als aktuelle AV-Quelle anzuwählen. 4.3. Umschalten zwischen AV1 und AV2 Nachdem der c.LOGiC als aktuelle AV-Quelle angewählt wurde, - Auto auswählen, um das RC-Code Menü zu öffnen RC1 auswählen, um auf AV1 umzuschalten oder RC2 auswählen, um auf AV2 umzuschalten mit ....... zum Ziffernblock zurückkehren 15 Sekunden warten, dann kann der Ziffernblock für Fernbedienungsfuntionen genutzt werden Hinweis: Wenn AV2 deaktiviert ist (siehe Kapitel Deaktivierung des c.LOGiC AV2-Eingangs), ist es nicht möglich, auf den AV2 des c.LOGiC umzuschalten. 4.4. - Gerätesteuerungsebenen belegen TV im Hauptmenü der Navigation auswählen TV-Ebenen Menü öffnen (Bild 1) Auto auswählen, um das RC-Code Menü zu öffnen (Bild 2) RC1 für AV1 (RC2 für AV2) auswählen (nicht im Bild dargestellt) Mit .......zum Ziffernblock zurückkehren innerhalb von 10 Sekunden den gerätespezifischen IR-Code aus der Gerätesteuerungstabelle (Anhang A) eingeben und weitere 15 Sekunden warten Version 23.08.2010 Seite 10 Hinweis: Wenn AV2 deaktiviert ist (siehe Kapitel Deaktivierung des c.LOGiC AV2-Eingangs), ist es nicht möglich, die Gerätesteuerung für AV2 zu belegen. C2-LR-R 4.5. Belegungstabelle Die Belegungstabelle zeigt, welche Funktionen der angeschlossenen Geräte über die TouchScreen Tasten ausgeführt werden können. Sobald ein AV-Eingang aktiviert ist, wird durch die Touch-Screen Taste in der linken Spalte, die in der Belegungstabelle ausgeführte Funktion des Gerätes ausgeführt. Die Beschreibung der Funktion entspricht den Tasten der Fernbedienung des angeschlossenen Gerätes. Bei den angeschlossenen Geräten kann die Tastenbezeichnung auf der Fernbedienung variieren (z. B. AV statt Source). Belegungstabelle c.LOGiC Landrover TouchScreen Taste 1 DVB-T DVD-Player DVDWechsler iPod®-Control Analog-Tuner AUTO PLAY PLAY PLAY/PAUSE SCAN 2 ↑ ↑ ↑ ↑ VOL + 3 EPG STOP STOP POWER FM 4 ← ← ← ← CH - 5 OK OK OK ENTER MODE 6 → → → → CH + 7 EXIT PBC DISC SHUFFLE ADJUST 8 ↓ ↓ ↓ ↓ VOL - 9 MENU SETUP SETUP LIGHT MODE |< CH - TRACK - TRACK - TRACK - CH - >| CH + TRACK + TRACK + TRACK + CH + Zusätzlich zu den Touch Screen Tasten können die Lenkradtasten HOCH und RUNTER für Fernbedienungsfunktionen genutzt werden. Die RUNTER Taste hat die gleiche Funktion wie “|<” und die HOCH-Taste hat die gleiche Funktion wie “>|” auf dem Touch-Screen. 5. Technische Daten 10.5 – 14.8V <1mA 120mA 1.8W -30°C bis +80°C 202g 90 x 30 x 105 mm Seite 11 Spannungs-Arbeitsbereich Ruhestrom Arbeitsstrom Leistungsaufnahme Temperaturbereich Gewicht Abmessungen (nur Box) B x H x T Version 23.08.2010 C2-LR-R 6. Technischer Support Caraudio-Systems Vertriebs GmbH Hersteller/Distribution Rheinhorststr. 22 D-67071 Ludwigshafen am Rhein NavLinkz GmbH Vertrieb/Techn. Händler-Support Eurotec-Ring 45 D-47445 Moers Tel +49 180 3 907050* Email [email protected] * 7,6cent/Minute aus dem dt. Festnetz, vom dt. Mobilfunk je nach Provider mehr. Seite 12 Rechtlicher Hinweis: Hier genannte Firmen- und Markenzeichen sowie Produktnamen, sind eingetragene Warenzeichen ® und somit Eigentum der jeweiligen Rechteinhaber. Version 23.08.2010 C2-LR-R Anhang A – Gerätesteuerungstabelle Landrover Kompatible Geräte 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 39 41 42 43 44 45 46 47 48 49 51 52 53 54 81 82 83 84 85 86 87 88 89 91 92 93 94 95 DVBT Alpine TUE-T150DV , Alpine TUE-T200DVB, (Alpine RUE - 4158) DVBT Eastern SE863-T iPod Vlink DVBT ZENEC ZE-DVBT25, Digitaldynamic TRT-500 V-HUB VPA-B222R Alpine Radio V-HUB VPA-B222R Alpine DVD DVDC Necvox DVA-3206 Analog-TV Alpine TUE-T112P Analog-TV TRT-003 DVD Visteon VXM 2200 DVBT Quantum QTM10 DVD Elite ELT-900XU DVDC CKO MPC6, DVC62 DVD-TIXXON (No Name) HD-Player 3,5“ MVIX MV-5000U DVD Axion VDV-402 / Nesa DVD-2007 DVD Bullit CDVD12 DVD ZENEC ZE-080 DVBT/DVD USB Digitaldynamic Multiplayer CTD-H1 iPod Alpine KCE-425I Analog-TV TVT-765 DVBT Emperor DTR-1203 / Conexx Mini blau / Clarion DTX509E DVBT Carmedien DVB423 (1 Version) DVBT M-DVT0201 (Jam Car HiFi Berlin & Car-Hightech Hannover) DVD600 (1/2 DIN USB/SD) - (Fast identisch mit RC38) DVD Phonocar VM 015 (USB/SD) DVBT Hirschmann CarTV Version 2.0 / Visteon DVB-T D80 (Maxxline) DVBT DAS / Dietz 1492 DVBT Ampire DVBT50 i-GO Navi TRI 1100 (DVB-T Tuner mit USB und HDMI Anschluss) DVD500UX HD DVB-T MPEG-4 VCAN (HDMI, USB) DVD Phonocar -VM 015 (USB/SD) - Klon DVB600 (USB) DVB288 DVB Carmedien DVB423 (2 Version) DVB Carmedien DVB423 (3 Version) CM-DVD01 (DVD501) Carmedian DVD Player DVD USB, MP410, AD212U, DVP-1000M, DVP-900HD, DVD500U, DVX100, DV2602 DVBT DVB2007, Dietz 1491/V DVBT Ampire DVBT100 DVBT DVB2008, TRT-400 DVDC CKO DVC10 DVDC CKO- DVC 6M , Yamakawa DVD-Changer DVBT NL, SENERGY, CKO DVBT-1080, Axion DVBT 500, Bullit DVBT DVD Senergy ADJQ-DVDRD, PYLE PLTD24, Veba, Conexx,Carmedien CM06 DVD 1/2 DIN (NO NAME) DVDC Alpine DVE-5207, DVDC DHA-S690 (DVD RUE - 4201) DVD BOA 85700 /AIV, MP412, C-KO 412 DVBT Ampire DVBT200 HD Microlab - Pocket X Div 25 (2,5 Zoll HD Player, Tixxon) Alpine KCE-635 (USB Player) Version 23.08.2010 Seite RC 13 Hinweis: Durch die fehlende “0” im Ziffernblock der Navigation weichen die Gerätecodes von anderen c.LOGiC ab. C2-LR-R c.LOGiC-Interface C2-LR-R for Landrover touch-screen navigation systems (Only for vehicles WITHOUT factory rear-view camera) Product features • Full plug and play multimedia interface • 2 AV-inputs with separate IR-control channels • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, … • after-market rear-view camera input • automatic switching to after-market rear-view camera input (only from interface mode) • rear-view camera power (+12V max 1A) • rear-seat-entertainment video output • power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices • video-in-motion Version 23.08.2010 C2-LR-R Contents 1. Prior to Installation 1.1. 1.2. 1.3. 1.4. 1.4.1. 1.4.2. Delivery contents Check compatibility of vehicle and accessories Setting the Dip switches of the CAN-box TV-400-R Setting the Dip switches of the MOST®-box C2C-M315 Automatic switching to after-market rear-view camera Deactivating c.LOGiC AV2-input 2. Connection schema 3. Installation 3.1. 3.2. 3.3. 3.3.1. 3.3.2. 3.3.3. 3.3.4. 3.4. Interconnecting MOST®-box, CAN-box and harnesses Connections to the factory navigation Connecting peripheral devices AV-source(s) Installing AV-source’s IR-sensor additionally After-market rear-view camera After-market rear-seat-entertainment Activation of remote functions 4. Operation 4.1. 4.2. 4.3. 4.4. 4.5. Activation of the video-in-motion function Selecting the c.LOGiC as current AV-source Switching between AV1 and AV2 Assigning device controls Button assignment table 5. Specifications 6. Technical support Page 1 Appendix A – Device control table Version 23.08.2010 C2-LR-R Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. MOST®-box C2C-M315 HW_____ SW_____ CAN-box TV-400-R HW_____ SW _____ Harness C3C-LR Harness C2C-IR If remote function for the connected devices shall be used, additional an IR- Page 2 Remote cable and Y-adapter are needed, see chapter AV-source(s). Version 23.08.2010 C2-LR-R 1.2. Check compatibility of vehicle and accessories Requirements Vehicle Range Rover (Vogue), Range Rover Sport, Discovery3 Only vehicles without factory rear-view camera Navigation Touch-Screen navigation (model til 2009) Limitations Factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed. After-market rear-view cam Automatic switching to camera only works from c.LOGiC mode 1.3. Setting the dip switches of the CAN-box TV-400-R All vehicles 1.4. dip 1 ON, dip 2 ON, dip 3 ON Setting the dip switches of the MOST®-box C2C-M315 The default dip switch settings of the MOST®-box need to be changed ONLY if an after-market rear-view camera shall be connected or if the AV2 of the c.LOGiC shall be deactivated. The dip switches are located inside the MOST®-box. For changes it is necessary to open the box. Default settings are: dip1 = ON, dip2 = OFF, dip3 = OFF 1.4.1. Automatic switching to after-market rear-view camera If an after-market rear-view camera shall be connected set dip2 = ON (up). Note: With after-market cameras, automatic switching works only from c.LOGiC mode. 1.4.2. Deactivating c.LOGiC AV2-input Version 23.08.2010 Page 3 If only one AV-source shall be connected to the c.LOGiC, we recommend to disable the AV2-input, to avoid customers switching by mistake to black/no picture of the AV2-input. In order to disable the AV2-input of the c.LOGiC, set dip1 = OFF (down). C2-LR-R Page 4 2. Connection schema Version 23.08.2010 C2-LR-R 3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Place of installation is behind the factory navigation monitor and on the rear of the radio module. On Range Rover (Vogue) the radio module is a hide-away box which is located behind the glove box. 3.1. Interconnecting MOST®-box, CAN-box and harnesses Plug harness C2C-IR into 4pin Molex of MOST®-box C2C-M315. Plug harness C3C-LR into 8pin Molex of CAN-box TV-400-R. Plug harness C3C-LR into 14pin Molex of MOST®-box C2C-M315. Page 5 Plug male MOST®-connector of C3C-LR into female MOST®-socket of MOST®-box C2C-M315. Version 23.08.2010 C2-LR-R 3.2. Connections to the factory navigation Access to rear side of the factory navigation monitor and the rear of the factory navigation radio module is necessary. Transfer male MOST®-connector of vehicle harness from rear of radio module into harness C3C-LR. Transfer female system-connector of vehicle harness from rear of radio module into harness C3C-LR. Plug female system-connector of C3C-LR into male socket of radio module. Plug male MOST®-connector of C3C-LR into male MOST®-socket of radio module. Plug female Fakra-connector of C3C-LR into male Fakra-socket of monitor. 3.3. Connecting peripheral devices It is possible to connect up to 2 after-market AV-sources, after-market rear-view camera and rear-seat-entertainment to the c.LOGiC-Interface. Page 6 Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible. Version 23.08.2010 C2-LR-R 3.3.1. AV-source(s) The c.LOGiC interface has the possibility to connect and remotely control by navigation buttons up to 2 pre-programmed devices. The device list in the device control table shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. Using the respective STA-xxx IR-control cable, interconnect the blue (yellow) female 3pin AMP connector of harness C2C-IR and the IR-port of the AV-source 1 (AV-source 2). Using an RCA-cable, interconnect the female RCA-port AV1 (AV2) of the MOST®-box C2C-M315 with the AV-output of the AV-source 1 (AV-source 2). Page 7 The pink ACC-output wire (+12V max 1A) of harness C3C-LR can be connected to the ACC-input wires of the connected device to switch it on. It carries +12V when the Comand is running. Version 23.08.2010 C2-LR-R 3.3.2. Installing AV-source’s IR-sensor additionally Additionally to the control via OEM navigation, it is possible to install the original IR-sensor of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be connected and used simultaneously. Installation of the IR-sensor is recommended as the controls via navigation are limited, and not all functions may be covered. 3.3.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to the female RCA connector R-CAM IN of MOST®-box C2C-M315. Connect the green wire of C3C-LR to the camera power supply (max. 1A) The green wire is high (+12V) when reverse gear is engaged. Page 8 Note: Automatic switching to camera only works from c.LOGiC mode. Version 23.08.2010 C2-LR-R 3.3.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of MOST®-box C2C-M315. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. If not, or if connecting more than two monitors, use a video splitter. 3.4. Activation of remote functions To activate the remote functions, the following Procedure needs to be performed after installation: - select TV from the navigations main menu open TV-layer menu (picture 1) select TV (system format menut) choose PAL B/G exit system format menu by Page 9 Note: After loss of battery power, the activation has to be repeated. Version 23.08.2010 C2-LR-R 4. Operation 4.1. Activation of the video-in-motion function The video-in-motion function is activated permanently without disturbing the navigation performance. 4.2. Selecting the c.LOGiC as current AV-source Select TV from the navigation’s main menu to choose the c.LOGiC as current AV-source. 4.3. Switching between AV1 and AV2 After selecting the c.LOGiC as current AV source. - select Auto to enter RC-code menu select RC1 to switch to AV1 or RC2 to switch to AV2 return to number pad by wait 15 seconds, then the number pad can used for remote functions Note: If the AV2 is deactivated (see chapter Deactivating c.LOGiC AV2-input), it is not possible to switch to thec.LOGiC’s AV2. 4.4. - Assigning device control for connected AV-source select TV from the navigations main menu Open TV-layer menu (picture 1) select Auto to enter RC-code menu (picture 2) select RC1 for AV1 (RC2 for AV2, not shown on picture) return to number pad by within 10 seconds, enter the device-related IR-codefor AV1 (AV2) as described in device control table (appendix A) and wait another 15 seconds Page 10 Note: If the AV2 is deactivated (see chapter Deactivating c.LOGiC AV2-input), it is not necessary, nor possible to assign device controls for AV2. Version 23.08.2010 C2-LR-R 4.5. Button assignment table The button assignment table shows which functions of the connected devices can be executed by touch-screen buttons. Once an AV-input is activated, the touch-screen number pad button in the left column will execute the function described in the corresponding device column. The function description equals the remote control buttons of the device’s remote control. On the additional device the writing on the remote control buttons may vary (e.g. AV instead of Source). Button assignment table c.LOGiC Landrover Touchscreen button 1 DVB-T DVD-player DVDchanger iPod®-control Analog-tuner AUTO PLAY PLAY PLAY/PAUSE SCAN 2 ↑ ↑ ↑ ↑ VOL + 3 EPG STOP STOP POWER FM 4 ← ← ← ← CH - 5 OK OK OK ENTER MODE 6 → → → → CH + 7 EXIT PBC DISC SHUFFLE ADJUST 8 ↓ ↓ ↓ ↓ VOL - 9 MENU SETUP SETUP LIGHT MODE |< CH - TRACK - TRACK - TRACK - CH - >| CH + TRACK + TRACK + TRACK + CH + Additionally to the touch-screen buttons, the steering-wheel buttons UP and DOWN can be used for remote functions. DOWN-button has the same function as “|<” on the touchscreen and UP-button has the same function as “>|” on the touch-screen. 5. Specifications Operation voltage Stand-by power drain Operation power drain Power consumption Temperature range Weight Measurements (box only) B x H x T 10.5 – 14.8V DC <1mA 120mA 1.8W -30°C to +80°C 202g 90 x 30 x 105 mm 6. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution Rheinhorststr. 22 D-67071 Ludwigshafen am Rhein NavLinkz GmbH corporate sales/tech dealer-support Eurotec-Ring 45 D-47445 Moers Page 11 phone +49 180 3 907050 email [email protected] Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 23.08.2010 C2-LR-R Appendix A – device control table Landrover Compatible devices 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 39 41 42 43 44 45 46 47 48 49 51 52 53 54 81 82 83 84 85 86 87 88 89 91 92 93 94 95 DVBT Alpine TUE-T150DV , Alpine TUE-T200DVB, (Alpine RUE - 4158) DVBT Eastern SE863-T iPod Vlink DVBT ZENEC ZE-DVBT25, Digitaldynamic TRT-500 V-HUB VPA-B222R Alpine Radio V-HUB VPA-B222R Alpine DVD DVDC Necvox DVA-3206 Analog-TV Alpine TUE-T112P Analog-TV TRT-003 DVD Visteon VXM 2200 DVBT Quantum QTM10 DVD Elite ELT-900XU DVDC CKO MPC6, DVC62 DVD-TIXXON (No Name) HD-Player 3,5“ MVIX MV-5000U DVD Axion VDV-402 / Nesa DVD-2007 DVD Bullit CDVD12 DVD ZENEC ZE-080 DVBT/DVD USB Digitaldynamic Multiplayer CTD-H1 iPod Alpine KCE-425I Analog-TV TVT-765 DVBT Emperor DTR-1203 / Conexx Mini blau / Clarion DTX509E DVBT Carmedien DVB423 (1 Version) DVBT M-DVT0201 (Jam Car HiFi Berlin & Car-Hightech Hannover) DVD600 (1/2 DIN USB/SD) - (Fast identisch mit RC38) DVD Phonocar VM 015 (USB/SD) DVBT Hirschmann CarTV Version 2.0 / Visteon DVB-T D80 (Maxxline) DVBT DAS / Dietz 1492 DVBT Ampire DVBT50 i-GO Navi TRI 1100 (DVB-T Tuner mit USB und HDMI Anschluss) DVD500UX HD DVB-T MPEG-4 VCAN (HDMI, USB) DVD Phonocar -VM 015 (USB/SD) - Klon DVB600 (USB) DVB288 DVB Carmedien DVB423 (2 Version) DVB Carmedien DVB423 (3 Version) CM-DVD01 (DVD501) Carmedian DVD Player DVD USB, MP410, AD212U, DVP-1000M, DVP-900HD, DVD500U, DVX100, DV2602 DVBT DVB2007, Dietz 1491/V DVBT Ampire DVBT100 DVBT DVB2008, TRT-400 DVDC CKO DVC10 DVDC CKO- DVC 6M , Yamakawa DVD-Changer DVBT NL, SENERGY, CKO DVBT-1080, Axion DVBT 500, Bullit DVBT DVD Senergy ADJQ-DVDRD, PYLE PLTD24, Veba, Conexx,Carmedien CM06 DVD 1/2 DIN (NO NAME) DVDC Alpine DVE-5207, DVDC DHA-S690 (DVD RUE - 4201) DVD BOA 85700 /AIV, MP412, C-KO 412 DVBT Ampire DVBT200 HD Microlab - Pocket X Div 25 (2,5 Zoll HD Player, Tixxon) Alpine KCE-635 (USB Player) Version 23.08.2010 Page RC 12 Note: Due to the missing “0” on the number pad of the navigation, the device codes are different from other c.LOGiC. C2-LR-R