TMT SM-25D - TMT Company GmbH, Kirchheimbolanden
Transcrição
TMT SM-25D - TMT Company GmbH, Kirchheimbolanden
TMT Release Film SM-25D For Lamination of Rigid Multilayer and Flexible Circuits TMT Release Film is a high temperature-resistant Release Film specifically engineered for laminating rigid, flexible and exotic substrate Printed Circuit Boards. It is manufactured under a patented process, with stringent quality controls. FEATURES Easy, contaminant-free release from resins and separator plates. Operating temperatures up to 200°C. Smooth surface finish, with superior conformal properties. Free of embedded impurities. Extremely low X-Y axis shrinkage and reduced static potential Essentially inert: no out-gassing, no plate residue, no interlaminar adhesion influence, no vacuum system contamination Environmentally friendly: no Ozone Depleting Chemicals, no Fluorine’s. Available in custom-sized tooled sheets and rolls shipped . STORAGE AND HANDLING TMT Release Film is a hydrophilic, or water-sensitive, material. Moisture and water act as plasticizers. The higher the moisture content of the film the more flexible and rubbery it behaves. The lower the moisture content the stiffer and tougher it behaves. In vacuum bag molding, especially when making articles with deep draws, a bag material which can be readily drawn or stretched is required. the level of moisture content in TMT Release Film at time of use is therefore an important criterion for successful performance. When shipped, TMT Release Film is preconditioned to a moisture level which provides optimum handling characteristics at time of use. In order to preserve these optimum characteristics it is recommended that the film, after being removed from the shipping container, be either placed in a protective box or covered with the polyethylene wrap in which it is shipped. Dry environments (common in winter) tend to dehydrate materials such as TMT Release Film. Die Angaben stützen sich auf den heutigen Stand der Kenntnisse und Erfahrungen. Die Angaben haben nicht die Bedeutung von Eigenschaftszusicherungen und begründen kein vertragliches Rechtsverhältnis. TMT Release Film SM-25D Model: TMT SM25D Release coating Yes Base material PET Color/Surface Transcluent/Matt Properity Units Spec. Measured Values Test Methods Average Thickness µm 25 ±1 25,3 Micrometer Methods - 200,0 Max. Temperature °C Use Temperature ASTM D 3418 - 190,0 15 ±3.5 15,3 Tensile Strength MD TD 18 ±3.5 21,0 Elongation at Break MD 125±25 148 100±25 115,5 Heat Shrinkage MD 3.7 ±1 3,2 1.5 ±1 1,2 Ra - 0,359 Surface Roughness Front Face Rz - 3,327 Rmax - 3,989 - 0,37 - 0,28 - 280 - 268 ASTM D-3330 KS M-3725 87.0 ±4.00 83.16 ASTM D-1003 kgf/mm² ASTM D882 % TD % TD US C.O.F. UK Max. Releasion Avr. Haze Guarantee gf/25mm % ASTM D-2305 (200 °C/10min) JIS-B0601 ASTM D-1894 6 month As the conditions or methods of use, including storage, are beyond our control, TMT Trading GmbH, does not assume any responsibility for the performance of this material for any particular use. The material is sold “as is”. TMT disclaims, and buyer waives, any and all implied warranties, including without limitation the warranties of merchantability and of fitness for a particular use. Die Angaben stützen sich auf den heutigen Stand der Kenntnisse und Erfahrungen. Die Angaben haben nicht die Bedeutung von Eigenschaftszusicherungen und begründen kein vertragliches Rechtsverhältnis.