E7T70 2751 - Trelleborg Sealing Solutions
Transcrição
E7T70 2751 - Trelleborg Sealing Solutions
MATERIAL-DATENBLATT / MATERIAL DATA SHEET Material-Nr.: Material No.: E7T70 Referenz-Material-Nr.: Reference-Material No.: 2751 Elastomerbasis Elastomere base DIN ISO 1629 Härte Hardness DIN 53 505 Farbe Colour Dichte Specific gravity EPDM 70 ± 5 Shore A schwarz / black DIN EN ISO 1183-1 1,09 +/- 0,02 g/cm³ Das Material-Datenblatt befreit den Abnehmer / Anwender nicht selbst die Eignung unserer Ware für den beabsichtigten Verwendungszweck zu prüfen. Das Datenblatt unterliegt nicht dem Änderungsdienst. This is to emphasise that the customer himself is obliged to test the material with regard to its suitability in the application. This data sheet has not a change of service. Polymer Laboratory Stuttgart erstellt am / issued: Fax.: +49 711 7864 778 [email protected] Unterschrift / signature: 2007-12-19 kfu FB-PLS-001/f2007-04-02 Vers.4 kfu MATERIAL-DATENBLATT / MATERIAL DATA SHEET Material-Nr.: Material No.: E7T70 November 2007 DATA SHEET MATERIAL REFERENCE No. 2751 Hardness Range: 65 - 75 IRHD Trelleborg Sealing Solutions Malta material reference 2751 is an Ethylene-Propylene (EPDM) based compound designed to give good resistance to hot water and non-mineral based fluids such as anti-freeze & glycol type brake fluids. 2751 should not be used in contact with mineral based oils, lubricants or hydrocarbon fuels. Compound Key Properties include: - Low compression set and good heat resistance. Good resistance to hot water and steam. Good low temperature properties. Good resistance to water/anti-freeze mixtures. Good resistance to ozone and weathering. Projected service temperature range of -50 to +140°C which is dependant upon medium to be sealed and conditions of service. Possible Applications: - Heating and ventilation systems. - Water fittings. - Cooling systems. The information herein is accurate to the extent of our current technical knowledge. Trelleborg Sealing Solutions Malta Ltd makes no warranty that the material is suitable for all applications. Customers should undertake their own tests to ensure suitability for particular conditions of operation. Trelleborg Sealing Solutions Malta Ltd. HF73, Industrial Estate, Hal Far BBG3000, Malta. Telephone - 21651293 Telefax – 22205246 Polymer Laboratory Stuttgart erstellt am / issued: Fax.: +49 711 7864 778 [email protected] Unterschrift / signature: 2007-12-19 kfu FB-PLS-001/f2007-04-02 Vers.4 kfu MATERIAL-DATENBLATT / MATERIAL DATA SHEET Material-Nr.: Material No.: E7T70 MATERIAL REFERENCE No. 2751 CLAUSES UNITS SPECIFICATION Hardness Tensile Strength Elongation @ Break Specific Gravity IRHD N/mm2 % g/cm³ 70 ± 5 12.0 min. 150 min. 1.09 ± 0.02 Compression Set: 24 hrs @ 125°C % 10 max. IRHD % % ±5 -15 max. -10 max. IRHD % ±5 +5 max. IRHD % ±5 -5 max. °C -45 or colder Physical Properties: Heat Resistance: 70 hrs @ 125°C Hardness Change Tensile Strength Elongation Change Fluid Resistance: Distilled Water 70 hrs @ 100°C Hardness Change Volume Change Fluid Resistance: Lockheed Universal 70 hrs in 100°C Hardness Change Volume Change Low Temperature Retraction: TR10 Note: 1) All tests were carried out on 2mm test sheets, except for compression set (buttons). 2) All tests carried out to ASTM procedure. Polymer Laboratory Stuttgart erstellt am / issued: Fax.: +49 711 7864 778 [email protected] Unterschrift / signature: 2007-12-19 kfu FB-PLS-001/f2007-04-02 Vers.4 kfu