Editorial Guide for Content Creation

Transcrição

Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
Release Letter
Product:
Configuration Manager
Version:
5.33.0030
This letter contains latest information about the above mentioned software.
1. General
Configuration Manager is a generic configuration tool for all Bosch IP Network Video Products, both
software modules and hardware devices.
It is used for configuration and licensing of the various products where it may be included on the
product CD.
Configuration Manager 5.33.0030 is a maintenance release based on version 5.32.0112.
Its main purpose is to support all CPP4 and CPP6 devices running firmware up to 6.11.
It is also the configuration tool for Bosch Video Client (BVC) 1.7.4.
It includes VSDK 5.83 and latest plug-ins for IVA configuration.
This version supports 11 languages.
Make sure to always use the latest released version.
Changes to last version marked blue.
1
BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
2. New Features
•
Support for CPP4 and CPP6 cameras running FW 6.11 added.
•
Device IP conflicts are highlighted in device tree.
•
Support of multiple network interfaces for network scan. Network scan is executed in parallel
on all available network interfaces.
•
An optional button to expand/collapse the device tree can be added to the blue navigation bar
via preferences.
•
Unconnected video inputs on multi-channel encoders can be excluded from being displayed.
•
When nodes are expanded, the sub-tree is scrolled into the visible screen area of the device
tree.
•
Auto-completion in device tree filter has been added.
3. Changes
•
Optimizations in device tree to increase performance and to improve handling of more than
3000 devices.
2
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
4. Restrictions; Known Issues
•
VGA settings for VIP XD are not available in this Configuration Manager version. Must be set
up via the product’s web site.
•
When using the Wizard to re-configure this will not work for password-protected devices.
•
FTP address must be IP address only, URL is not supported.
•
When the integrated iqn-Mapper shall be used in a non-VRM environment, the iSCSI
configuration passwords must be set equal at all iSCSI targets.
•
Alarm input rules of AUTODOMEs running firmware version 4.10 cannot be configured
correctly in Configuration Manager. The Web interface shall be used instead.
•
After changing the IP address of a device the settings page might not be updated
automatically. Manual refresh might be required.
•
The Wizard may run into a timeout situation when configuring a camera with motion recording.
A “Retry” button appears which needs to be pressed then.
•
When time zone had been changed, synchronization to PC in Basic Mode does not update
time zone.
•
In Date/Time settings page, the date and time values shown are from PC instead of from
device.
•
Upload of a configuration file might be incomplete if it includes recording settings.
It is recommended to check the settings manually.
•
Special characters like ‘&<:>@’ are not allowed for names and passwords. If entered into
devices using the Web GUI the Configuration Manager will not be able to access the devices.
•
BVC system setup is limited to 200 inputs (cameras, relays, digital I/O).
•
Devices which are assigned to a recorder (e.g. VRM) are not marked in the Wizard with a
green checkbox if another recorder is selected. Multiple assignments may happen and special
attention is needed.
•
Saving empty password may cause I/O error message without effect for the setting.
•
User names and passwords for BVC user management are limited to 31 characters.
•
Database path must be re-written if previous installation did not use default path.
•
VRM parameters can only partially be dragged into table view.
•
On Windows 7 with UAC used, license application can only be performed when Configuration
Manager is run in administrator mode.
•
The following device context menu items are not available or not enabled for a Divar 700:
File Upload, Settings, Device Network Settings, Show in Web browser, Show Settings in Web
Browser, Blink LED, Reset.
•
'Device info' dialog for Divar 700 only shows the general information tab and information that
can be retrieved through the VideoSDK interfaces.
3
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
•
Configuration Manager Wizard does not support Divar devices. Divar devices can neither be
added to the system nor configured via Configuration Manager Wizard.
•
No IPv6 & DNS check for VRM databases.
•
DIBOS/BRS configuration (neither configuration pages nor via external configuration tools) is
not supported.
•
For cameras with Intelligent Tracking function, “Click on object” is not supported by
Configuration Manager.
•
Initial IP address configuration of DLA E-Series must be done by setting the PC’s IP address
in the range of the storage’s default IP address 192.168.128.101 for discovery. Once set to a
valid IP range, the Configuration Manager PC can be used with its standard IP address.
•
The handling of recovery of old data on a LUN when being assigned to a VRM system affects
the checkbox "restore database" in the LUN assignment dialog to have no function any more.
•
Configuration Manager may run into an access violation when an ONVIF camera with pan and
tilt but no zoom function is added to Video Streaming Gateway, e.g. like Axis M3007.
•
For legacy devices, e.g. VideoJet 8008 or VideoJet 10, all tabs and buttons regarding motion
detection are deactivated, thus motion detection cannot be configured.
•
FTP accounts’ passwords are not stored during Backup & Restore settings.
•
ONVIF devices from local network are added to network scan result whereas devices that are
outside the local network cannot be detected.
•
User interface for the DIVAR AN 3000/5000 FW upgrade feature is only available in English.
•
If the DIVAR AN 3000/5000 FW upgrade transfer is interrupted by a power or network failure
the remote system might get in a state that it can’t be upgraded again through Configuration
Manager.
In this case, the upgrade must be done manually through the WEB UI or locally on the device.
•
A FW upload of a DIVAR AN 3000 or DIVAR AN 5000 can only be cancelled during the
transfer phase. Once the file has been transferred to the device and the upgrade process has
been started this cannot be cancelled anymore.
•
Since Configuration Manager 5.30 a VRM lock on a device cannot be removed anymore. The
device must be factory-defaulted or added to another VRM.
•
For dual recording, Configuration Manager does not allow to assign the identical LUN to both
recording entries.
•
VCA tabs, e.g. Motion Detection may not be refreshed after firmware upgrade or downgrade.
Manual refresh might be necessary.
4
Security Systems
From
ST-VS/MKP1
Nuremberg
Product Management
10.07.2015
Note:
If multiple Configuration Managers are used in the network, maintaining the same or an
overlapping set of devices simultaneously, unpredictable effects might occur when writing to
the devices.
Note:
For stand-alone installation of Configuration Manager 5.0 or higher, .NET 4.5 must be
installed.
Note:
Due to the change to .NET 4.5 DiBos devices cannot be found by network scan if .NET 3.5 is
not installed.
If required install .NET 3.5 in addition to the Configuration Manager installation package.
5. System Requirements
Hardware
Personal Computer
CPU
Dual Core, 3.0 GHz or better
RAM
min. 2 GB
OS
Windows Server 2008R2
Windows 7 SP1
Windows 8
Graphic Card
refer to MPEG-ActiveX 5.83 or VideoSDK 5.83
Ethernet Card
100 Mbps
Sound Card
Recommended
Software
Microsoft .NET 4.5
Free Memory (Installation)
250 MB (Configuration Manager, V-SDK)
5
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
6. Features and Changes with former versions
New Features with 5.32.0112
•
Support for FW 6.10 added.
•
Support for cameras with telephoto lens added.
•
Support for panoramic cameras added.
•
Support for DSA E2700 storage systems with new load-balancing values added.
Changes with 5.32.0112
•
56-Bit DES cipher suite is disabled for TLS connection.
•
Device type is now correctly displayed for DIVAR AN 3000 and DIVAR AN 5000.
•
An issue with timeout of remote FW upgrade on DIVAR AN 3000 and DIVAR AN 5000 via low
bandwidth connections has been fixed.
6
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
New Features with 5.31.0092
•
Recording profile pages have been reworked for improved usability.
•
ANR 2.0 can be configured to a standard use case by just enabling a checkbox.
•
A context menu (right-click) has been added to “My devices” tree that allows filtering to
increase usability:
o When displaying all iSCSI targets of a device a filter can be set to only display the targets
belonging to the same E-series drive.
o A LUN filter can be set which displays all targets belonging to the same physical storage.
o A filter can be set which displays all targets with read-only LUNs and their parent nodes.
•
The IVA configuration video can be enlarged as much as possible for easier configuration and
drawing lines and fields. Double click opens a separate scalable video window. A second
double click changes the video window to full screen.
•
Serial number is shown in "General->Version information" tab below HW/FW versions. This
allows it to be pulled into table view.
•
The port being used for mass firmware upgrade to DIVAR AN 3000 and 5000 can be made
persistent. It is shown and configurable in the firmware upgrade window.
•
Sites can now be collapsed or expanded with one click, making device selection within large
site structures easier.
•
Firmware upload via Configuration Manager is possible towards DIVAR IP 2000 once it is
using VRM 3.20.
•
Firmware upload is possible towards ONVIF devices.
•
In “My devices” a column has been added to show the firmware revision where retrievable
from a device. For devices that are not continuously connected the last found firmware is
stored until the next connection.
•
Start-up performance has been increased due to a restructured database which also requires
less installation memory.
•
Usability has been improved by pulling parameter names and input fields closer together to
avoid large distances due to window scaling.
7
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
•
Firmware version of DIVAR AN 3000 and DIVAR AN 5000 is now displayed in firmware
upload dialog window before and after the upload.
•
Device info also shows firmware version of DIVAR AN 3000 and DIVAR AN 5000.
Features with 5.21.0101
•
Support of the new panoramic cameras:
o FLEXIDOME IP panoramic 7000 12MP 180
o FLEXIDOME IP panoramic 7000 12MP 360
o FLEXIDOME IP panoramic 7000 12MP 180 IVA
o FLEXIDOME IP panoramic 7000 12MP 360 IVA
•
It is now possible to perform a firmware upgrade of DIVAR AN 3000 and DIVAR AN 5000.
The upgrade can be performed for multiple devices in parallel.
•
Load time has been reduced a lot together with a more compact XML footprint.
•
Scan for DSA-E series storage now shows progress indication.
•
ONVIF Profile S client conformance could be achieved and will be posted on the ONVIF web
site accordingly.
•
Configuration Manager database can be imported via .csv file. This e.g. allows easier
migration from existing installations including usernames and passwords, as well as tree
structuring and additional attributes.
8
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
•
Improved usability for imaging configuration.
•
Installation now bases on Microsoft .NET 4.5 instead of .NET3.5.
•
Support of new CPP4 products:
o EXTREGA IP dynamic 9000
o EXTREGA IP starlight 9000
o MIC IP dynamic 7000
o MIC IP starlight 7000
o DINION IP 5000 family
o DINION IP 4000 family
o TINYON IP 2000 family
•
Includes VideoSDK 5.81 which supports 4K Ultra HD and Multi-Mega-Pixel video streams up
to 12 MP.
•
Two iSCSI LUNs can be managed for local recording.
•
Maximum I-frame distance in encoder profiles is now also based on configurable
MAX_GOP_LENGTH_VALUE.
•
Support of platform CPP6 and products based on this with initial firmware 5.91:
o DINION IP starlight 8000 MP
o DINION IP ultra 8000 MP
•
Support of Video Client 1.6 which is required for viewing of 4K Ultra HD and Multi-Mega-Pixel
video streams up to 12 MP.
•
Includes VideoSDK 5.80 which supports 4K Ultra HD and Multi-Mega-Pixel video streams up
to 12 MP.
9
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
•
Configuration Manager now differentiates between DIVAR IP models and displays DIVAR IP
with value level number.
•
Device type and platform indication added to Identification section.
•
Configuration Manager 5.0 is internally split up into a service which performs the
communication to devices and which provides an API to a user interface, and the user
interface itself. This is not visible to a user itself but prepares a path to future applications.
•
New user experience by new style and layout
New design follows the recent Bosch Software User Interface style guide and incorporates
usability improvements that will also be presented in future firmware and software releases.
•
Usability improvements, achieved by a variety of modifications and new features:
o Basic and Advanced Mode have been recombined due to the easier handling and
structure.
o Simplified navigation via Blue Bar tabs and icons.
o Icons have been reworked to provide a clearer indication of device type and status.
o Responsive filter function for device trees.
o Enhanced multi-select function down to camera level even for multi-channel devices.
o Colors in recording scheduler are aligned with VRM 3.10 and BVMS color scheme.
o Re-arranged and streamlined configuration pages for cameras and encoders to make
configuration faster and simpler.
•
Support of site configuration for use in Bosch Video Client.
•
Support of VRM pools with new icon.
•
Support of CPP4 and CPP5 devices with firmware 5.90.
•
Support of DIVAR IP 3000 and 7000 as DVR-like appliance systems.
•
Support of alarm recording configuration in Video Streaming Gateway.
•
Installer is signed by official Bosch ST certificate to allow installation on Win7/8 platforms.
10
Security Systems
From
Nuremberg
ST-VS/MKP1
Product Management
10.07.2015
•
The default communication protocol which is selected when a device is added to the system
has been changed to HTTP.
This increases the chance to reach a device regardless of where it is located, so also via
remote or Internet links.
But this may also has an impact on functionality requiring UDP or multicast communication.
If so, you may choose non-HTTP communication on adding to system to ensure the desired
communication flow.
Affected areas may be:
o Video connections using TCP conflict with Multicast mechanism.
o Replay from VRM only may cause a performance loss.
o Some functions may not be available, e.g. display of protected recordings from VRM in
the timeline of Video Client.
11

Editorial Guide for Content Creation

Transcrição

Documentos relacionados

VIP X1 XF - Bosch Security Systems

Release Note - Bosch Security Systems

Release Note (CPP5 H.264 Firmware 5.92.0029)

Bosch Recording Station Appliance

Robert Bosch Kolleg

Sample Coordinator (m/f)

Open as PDF

The Mistake in Carl Bosch`s PhD Thesis: A Contribution to

production lot numbers concerned by the update

Bosch Lighting

2 | Classroom phrases

Whether construction material, protective material

Firmware x95

EDI in Procurement - Purchasing and Logistics

MAT-Label - Purchasing and Logistics

Nuremberg - potential