FOREST - Fire - Workwear Security Shoes and Boots Collection

EURO PM
FOREST - Fire - Workwear
Security Shoes and Boots
Collection 2014 / 2015
PICTOGRAMS AND DESIGNATION OF SAFETY
SB
EN ISO 20345:2012 - CHAUSSURES DE SECURITE
EN ISO 20345:2012 - SECURITY SHOES
EN ISO 20345:2012 - SICHERHEITSSCHUHE
EN ISO 15090:2012 - CHAUSSURES DE POMPIER
EN ISO 15090:2012 - FIREFIGHTER SHOES
EN ISO 15090:2012 - SCHUHEN FÜR DIE FEUERWEHR
Propriétés fondamentales selon la norme (embout de protection des orteils 200 joules, résistance à la déchirure, forme, …)
Basic requirements as per standard (200 joule toe cap, tear strength, shape ...)
Grundlegende Anforderungen gemäß der Norm (200 Joule Zehenschutzkappe, Reißfestigkeit, Form, ...)
Norme Sapeur-Pompier. Indication de conformité à toutes les exigences normatives
Standard Firefighter. Indication of compliance with all standard requirements
Standard-Feuerwehrmann. Die Angabe der Übereinstimmung mit allen Standard-Anforderungen
F
FPA
S1
Propriétés fondamentales (SB) + zone du talon fermée, antistatique (A), pouvoir d‘absorption d‘énergie au niveau du talon (E)
Basic requirement (SB) + closed heel area, antistatic (A), energy absorbing capacity at the heel area (E)
Grundvoraussetzung (SB) + geschlossener Fersenbereich, antistatisch (A), Energie absorbierende Kapazität im Fersenbereich (E)
TYPE
S2
Comme S1 + imperméabilité à l’eau (WRU)
As S1 + water resistance (WRU)
Wie S1 + Wasserbeständigkeit (WRU)
TYPE
S3
Comme S2 + semelle antiperforation, semelle à crampons (P)
As S2 + anti-perforation midsole, profiled outsole (P)
Wie S2 + Anti-Perforation-Zwischensohle, profilierte Laufsohle (P)
1
2
3
Chaussure antistatique
Antistatic shoes
Antistatische Schuhe
FO
Résistance de la semelle aux hydrocarbures
Resistance of the sole to oil
Widerstand der Sohle gegen Öl
CI
Semelle isolante contre le froid
Outsole insulation against cold
Außensohle Isolierung gegen Kälte
HI
Semelle isolante contre la chaleur
Outsole insulation against heat
Außensohle Isolierung gegen Hitze
E
Absorption du choc dans la zone du talon
Shock absorption in the heel area
Dämpfung im Fersenbereich
M
Protection du métatarse
Metatarsal protection
Mittelfußschutz
Convient pour les opérations générales de sauvetage lors d’un incendie, adaptées aux interventions intérieures et incendies de tous types.
Suitable for general rescue operations during a fire, for indoor operations and all other tye of fire.
Geeignet für allgemeine Rettungsmaßnahmen bei einem Brand, für den Innen-Operationen und alle anderen Arten von Feuer.
Convient aux situations d’urgence présentant des risques exceptionnels avec matériaux dangereux. Egalement adaptés à
toutes opérations de sauvetages, pour tous types d’incendies.
TYPE Suitable for emergency situations with exceptional risks with hazardous materials. Also suitable for all rescue operations,
for all types of fires.
Geeignet für Notsituationen mit außergewöhnlichen Risiken, die mit gefährlichen Stoffen. Auch geeignet für alle Rettungsmaßnahmen, für alle Arten von Bränden.
Embout de protection métallique
Protective Metal toe cap
Schutz Metallkappe
A
Convient pour les opérations générales de sauvetage, pour l’extinction et la lutte contre l’incendie en plein air.
Suitable for general rescue operations and for fire fighting in open only.
Geeignet für allgemeine Rettungseinsätze und zur Brandbekämpfung in nur offen.
Résistance électrique - Chaussure isolante
Electrical resistance - Insulating Shoes
Elektrischer Widerstand - isolierende Schuhe
HI1
Niveau d’efficacité de l’isolation de l’ensemble de la semelle à la chaleur à 150°C / 30min.
Level of the insulation effiency of the entire insole to heat to 150°C / 30min.
Stufe der Isolierung Effizienz der gesamten Einlegesohle, um 150°C zu erhitzen / 30min.
WR
Résistance à la pénétration d’eau de la chaussure
Water resistance of shoes
Wasserdichtigkeit von Schuhen
HI2
Niveau d’efficacité de l’isolation de l’ensemble de la semelle à la chaleur à 250°C / 20min.
Level of the insulation effiency of the entire insole to heat to 250°C / 20min.
Stufe der Isolierung Effizienz der gesamten Einlegesohle, um 250°C zu erhitzen / 20min.
WRU
Résistance à l‘absorption d‘eau et à la pénétration de l‘eau par la tige
Water penetration and water absorption resistance
Wasser und Wasseraufnahme Widerstand
HI3
Niveau d’efficacité de l’isolation de l’ensemble de la semelle à la chaleur à 250°C / 40min.
Level of the insulation effiency of the entire insole to heat to 250°C / 40min.
Stufe der Isolierung Effizienz der gesamten Einlegesohle, um 250°C zu erhitzen / 40min.
HRO
Résistance de la semelle à la chaleur par contact
Resistance of the sole to contact heat
Widerstand der Sohle, um Wärme zu kontaktieren
EN ISO 17249:2007 - PROTECTION CONTRE LES COUPURES PAR SCIE A CHAINE
EN ISO 17249:2007 - PROTECTION AGAINST CHAINSAW CUTS
EN ISO 17249:2007 - SCHUTZ GEGEN KETTENSÄGE SCHNITTE
Semelle antiperforation
Anti-perforation sole
Durchtrittschutz gegen das Durchtreten spitzer Gegenstände
Niveau de protection contre les coupures par scie à chaine. Classe 1 : 20m/s – Classe 2 :24m/s – Classe 3 :28m/s
Level protection against chainsaw cuts. Class 1 : 20m/s – Class 2 : 24m/s – Class 3 : 28m/s
Niveau Schutz gegen Kettensäge Schnitte. Klasse 1: 20m / s - Class 2: 24m / s - Klasse 3: 28m / s
I
WRU
P
> <
AN
Protection de la cheville
Safety Protection zone to prevent injury to the ankle.
Sicherheitsprotektoren schützen vor Verletzungen im Knöchelbereich.
RESISTANCE DE LA SEMELLE AU GLISSEMENT
OUTSOLE RESISTANCE TO SLIP
SOHLE RUTSCHHEMMENDE
1
2
3
OB
EN ISO 20347:2012 - OB Sans embout
EN ISO 20347:2012 - OB Without toe-cap
EN ISO 20347:2012 - OB ohne zehenschutzkappe
Test « KWF » validant l’utilisation des chaussures de sécurité pour les travaux en foret
KWF test recognizing full conformity of safety footwear to the use in forestry work
KWF-Test erkennt voller Übereinstimmung von Sicherheitsschuhen auf den Einsatz in der Forstwirtschaft Arbeit
SR
SRA
Résistance au glissement sur sols industriels durs type « carrelage »
Resistance to slip on hard industrial floor type tiling
Widerstand auf harten Industrieboden Art Fliesen rutschen
Label de Qualité « DLG » décerné par la Société Allemande d’Agriculture
DLG tested and recommended by the German agriculture company
DLG Deutsche Landwirtschafts-Gesellschaft getestet und empfohlen
SR
SRB
Résistance au glissement sur sols industriels durs type sols en acier
Resistance to slip on hard industrial floor type steel floor
Widerstand auf harten Industrieboden Typ Stahl Boden rutschen
Membrane respirante “Puratex” par Freudenberg
Breathable membrane « Puratex » from Freudenberg
Atmungs-Membrane “Puratex” von Freudenberg
SRC
SRA + SRB: résistance au glissement sur tous types de sols durs
SRA + SRB: slip resistance on all types of hard floors
SRA + SRB: Rutschfestigkeit auf allen Arten von Hartböden
Indicateur principal de la conformité d’un produit aux législations de l’UE
Main indicator of a product conforms to EU legislation
Hauptindikator eines Produkt entspricht der EU-Gesetzgebung
A
B
SR
C
Produit fabriqué en Europe
Product made in Europe
Hergestellt in Europa
3
T
S
O
F
E
R
S
E
O
H
S
R
CH
E
H
T S
A
E OT
L
O
N
B
IO ER
T
C BB
E
T RU
O
R L
P
A
T
R
CU ATU
W N
A
D
S
N
AIN A
Black with red collar
Class 2 : Ref 111015
Class 3 : Ref 111016
Black with orange collar
Class 2 (Extreme Two): Ref 111011
Class 3 (Extreme Three): Ref 111012
Leather shoes with
chainsaw cut
protection lining.
FOREST SECURITY SHOES
AVAILABLE IN CLASS 2 AND CLASS 3
EXTREME TWO or THREE
AVAILABLE IN CLASS 2 AND CLASS 3
EXCELSIOR
Leather shoes with
chainsaw cut
protection lining.
Red with black collar
Class 2 : Ref 111013
Class 3 : Ref 111014
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
S3 (A + FO + E + WRU + P)
SRA - HI - CI - WR - AN - HRO
2
S3 (A + FO + E + WRU + P)
SRA - HI - CI - WR - AN - HRO
3
WRU
> <
2
WRU
SR
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
> <
SR
A
Made in Italy
External height: 25 cm
Internal height: 20 cm
Sizes range Mondopoint: 39 to 47
Upper: 2,2-2,4 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
3
A
Made in Italy
External height: 27 cm
Internal height: 24 cm
Sizes range Mondopoint: 39 to 47
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
7
Brown with black collar
Ref 111007
Black with orange collar
Ref 111009
FOREST SECURITY SHOES
CLASS 2
FOREST RANGER
Leather shoes with
chainsaw cut
protection lining.
CLASS 2
EXTREME FOREST
Leather shoes with
chainsaw cut
protection lining.
Black with orange collar
Ref 111006
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
S3 (A + FO + E + WRU + P)
SRA - HI - CI - WR - AN - HRO
S3 (A + FO + E + WRU + P)
SRC - HI - CI - WR - AN - HRO
2
2
WRU
WRU
> <
SR
> <
C
SR
A
Made in Italy
External height: 23 cm
Internal height: 20 cm
Sizes range Mondopoint: 39 to 47
Upper: 2,2-2,4 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
Made in Italy
External height: 23 cm
Internal height: 20 cm
Sizes range Mondopoint: 38 to 47
Sizes 48, 49, 50 : available with extra cost
Upper: 2,2-2,4 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
9
Black with black collar
Ref 111002
Black with orange collar
Ref 111001
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
S3 (A + FO + E + WRU + P)
SRC - HI - CI - WR - AN - HRO
1
WRU
FOREST SECURITY SHOES
CLASS 1
Black with orange collar
Ref 111005
CHALLENGER
Leather shoes with
chainsaw cut
protection lining.
CLASS 1
EXTREME ONE
Leather shoes with
chainsaw cut
protection lining.
> <
SR
C
Made in Italy
External height: 23 cm
Internal height: 20 cm
Sizes range Mondopoint: 38 to 47
Sizes 48, 49, 50 : available with extra cost
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
Black with yellow collar
Ref 111003
EN ISO 20344:2013
EN ISO 20345:2012
EN ISO 17249:2007
S1/P (A + FO + E + P)
SRC - HI - CI - WR - AN - HRO
1
> <
SR
C
Made in Italy
External height: 23 cm
Internal height: 20 cm
Sizes range Mondopoint: 38 to 47
Sizes 48, 49, 50 : available with extra cost
Upper: 2,0 mm leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 250cm long - polyester
11
WOODJACK
Orange / Black
Ref 121007
WOODJACK
WADER
Orange / Black
Ref 121011
SIERRA II - Orange / blue
Ref 121001
3
EN ISO 20345:2011 SB-E-P-SRB
EN ISO 17249:2004/A1:2007
B
Cotton lining
Insole: Felt
Toe-cap: Steel 200 joule
Anti-perforation
steel midsole
CLASS 3
Made in Europe
Boot height: 40 cm
Sizes range: 38 to 47
SR
Handmade vulcanized
natural rubber boots.
With chainsaw cut
protection lining.
FOREST SECURITY BOOTS
CLASS 3
WOODJACK & WOODMASTER
CLASS 3
SIERRA II & LUMBERJACK
Handmade vulcanized
natural rubber boots.
With chainsaw cut
protection lining.
LUMBERJACK - Orange / green
Ref 121002
WOODMASTER - Orange / black
Ref 121009
3
EN ISO 20345:2011 SB-E
EN ISO 17249:2004/A1:2007
Made in Europe
Boot height: 40 cm
Sizes range: 37 to 48
Cotton lining
Insole sewn cotton
Toe-cap: Steel 200 joule
VARIANT
3
EN ISO 20345:2011 SB-E-SRB
EN ISO 17249:2004/A1:2007
Variant: Anti-perforation
steel midsole - SANTIAGO
Orange / blue - Ref 121006
Made in Europe
Boot height: 40 cm
Sizes range: 38 to 47
Cotton lining
SR
B
Insole: Felt
Toe-cap: Steel 200 joule
13
E
IR
F
S
T
O
O
B
R
E
H
T
S
R
E
T
H
IG
F
F
E
IR
A
E
L
Leather safety boots
for firefighters.
With quick-close
zip and laces.
FIRE BK 978
FIRE SECURITY BOOTS
FIRE BEST K904
Leather safety boots
for firefighters.
With quick-close
zip and laces.
Ref 122002
Ref 122001
DIN EN 15090:2012
DIN EN ISO 20344:2013
DIN EN ISO 20345:2012
DIN EN 15090:2012
DIN EN ISO 20344:2013
DIN EN ISO 20345:2012
F2A - HI3 - SRC - CI - AN
CAT.III
F2A - HI3 - SRC - CI - AN
CAT.III
> <
SR
FPA
C
> <
SR
FPA
Made in Italy
External height: 30 cm
Internal height: 26 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
C
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 135cm long - polyester
Variant - Toe-cap : Steel 200 joule
Variant - Anti-perforation steel midsole
Made in Italy
External height: 26 cm
Internal height: 22 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 135cm long - polyester
Variant - Toe-cap : Steel 200 joule
Variant - Anti-perforation steel midsole
Variant - External height 30cm - Internal
height 26cm
Variant - Chainsaw Class 1 / Ref 122007
17
Leather safety boots
for firefighters.
FIREMAN 979 & 979 K
FIREMAN 979 K
Ref 122006
Ref 122003
Leather safety boots
for firefighters.
FIRE SECURITY BOOTS
FIRE MOBIL K 934
FIREMAN 979
Ref 122005
DIN EN 15090:2012
DIN EN ISO 20344:2013
DIN EN ISO 20345:2012
DIN EN 15090:2012
DIN EN ISO 20344:2013
DIN EN ISO 20345:2012
F2A - HI3 - SRC - CI - AN
CAT.III
F2A - HI3 - SRC - CI - AN
CAT.III
> <
> <
SR
FPA
Made in Italy
External height: 33 cm
Internal height: 30 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
SR
C
FPA
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 135cm long - polyester
Variant - Toe-cap : Composite 200 joule
Variant - Anti-perforation steel midsole
Made in Italy
External height: 32 cm
Internal height: 29 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
C
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Steel 200 joule
Laces: 135cm long - polyester
Variant - Toe-cap : Composite 200 joule
Variant - Anti-perforation steel midsole
19
R
A
E
W
K
R
O
W
S
E
O TS
H
S OO
R
E RB
H
T BE
A
E UB
L
Y LR
T
I
R RA
U
C TU
E
S NA
D
N
A
BS 853
Safety leather shoes
for building work
Ref 113010
Ref 113011
EN ISO 20345:2012
EN ISO 20345:2012
S3 (A + FO + E + WRU + P)
SRC - AN - WR - HI
S3 (A + FO + E + WRU + P)
SRC - AN - WR - HI
WRU
> <
WRU
SR
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 180cm long - polyester
> <
SR
C
Made in Italy
External height: 21 cm
Internal height: 19 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Safety leather shoes
for building work
WORKWEAR SECURITY SHOES
BS 896
C
Made in Italy
External height: 21 cm
Internal height: 19 cm
Sizes range Mondopoint: 38 to 48
Upper: 2,0-2,2 mm full grain leather
Front & back inside lining: membrane
PURATEX
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 180cm long - polyester
23
Safety leather shoes
for asphalt work
ASPHALT 991
ASPHALT 1191 - Black / red
Ref 113001
ASPHALT 991
Ref 113005
ASPHALT 1192 - Black / yellow
Ref
113002
Ref
113010
UNI EN ISO 20345:2008
S2 (A + FO + E + WRU)
WRU
ASPHALT 1196 - Black / blue
Ref 113003
Made in Italy
External height: 14 cm
Internal height: 11 cm
Sizes range Mondopoint: 40 to 46
Upper: 1,8-2,0 mm full grain leather
Front & back inside lining: breathable
fabric 2mm thickness
Ankle: synthetic with sponge rubber
padding
Tongue: synthetic
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 130cm long - polyester
Variant - Laces : Fireproof
Variant - Thread : Kevlar
Safety leather shoes
for asphalt work
WORKWEAR SECURITY SHOES
ASPHALT
UNI EN ISO 20345:2008
S2P (A + FO + E + WRU + P)
WRU
Made in Italy
External height: 17 cm
Internal height: 14 cm
Sizes range Mondopoint: 40 to 46
Upper: 1,8-2,0 mm full grain leather
Front & back inside lining: leather
Ankle: leather with sponge rubber padding
Tongue: padded leather
Anti-perforation midsole: polyester 4 mm
Removable insole: FUSTATIC antistatic
Outsole: nitrile rubber - heat resistant up to
300°C
Toe-cap: Composite 200 joule
Laces: 130cm long - polyester
Variant - Laces : Fireproof
Variant - Thread : Kevlar
25
WORK BOOTS
Black and yellow with steel toe-cap
Ref 123010
SB E FO SRA
Black and yellow with steel toe-cap
and steel midsole
Ref 123012
SB P E FO SRA
ELECTRO CLASS 00: 2,5kV
Ref 123001
500V c.a. - 750V c.c. / proof test current 2mA
ELECTRO CLASS 0: 5kV
Ref 123002
1000V c.a. - 1500V c.c. / proof test current 4mA
ELECTRO CLASS 1: 14kV
Ref 123003
Nominal tension up to 6kV c.a. / proof test current 6mA
SR EN ISO 20345:2012 (EN ISO 20345:2011)
VARIANT
ELECTRO CLASS 2: 20kV
Ref 123005
SR
A
17000V c.a. - 25500V c.c. / proof test current 13mA
Made in Europe
PPE Class 2
Textile lining
Moulded anti-slip outsole
Sizes range: 39 to 47
Natural vulcanized
rubber boots
for all purpose.
WORKWEAR SECURITY BOOTS
ELECTRO
High voltage
electrical boots,
rubber moulded
vulcanized.
Green and brown with steel toe-cap
Ref 123011
SB E FO SRA
Green and brown with steel toe-cap
and steel midsole
Ref 123013
SB P E FO SRA
SR EN ISO 20347:2012
SR EN 50321:2003
OB E SRA
SR EN ISO 20345:2012 (EN ISO 20345:2011)
VARIANT
SR
A
Made in Europe
PPE CAT II
Textile lining
Strengthening of sole and heel
Sizes range: 39 to 46 points French
Color: reddish brown
Range C: semi-high boots
SR
A
Made in Europe
PPE Class 2
Textile lining
Moulded anti-slip outsole
Sizes range: 39 to 47
27
FOREST - Fire - Workwear
All our products are MADE IN EUROPE
ZA des Romains Sud
11, route de la Salle
74960 CRAN-GEVRIER
FRANCE
Tél. +33 (0)4 50 67 52 25 - Fax. +33 (0)4 50 67 53 35
[email protected] - www.euro-pm.com
Copyright 2014/2015 Euro PM - Realization & Photography Le Studio K (www.lestudiok.fr)
EURO PM