OIL-HYDRAULIC BENT PUMP AXIAL PISTONS
Transcrição
OIL-HYDRAULIC BENT PUMP AXIAL PISTONS
OIL-HYDRAULIC BENT PUMP AXIAL PISTONS Main Dimensions Ref. BI M Fixation flange according to ISO 7653 (Dimensions in mm) B8x32x36 (DIN 5462) CTI BI M 1311- 3 Main Data Pumps BI Displacement (cm3/rot.) Operating pressure (bar) (up to) Peak pressure (bar) Operating rotation1 (rpm) Max. rotation without load1 (rpm) Weight (approx.) (kg) Pistons quantity A-Oil outlet (DIN ISO 228) B-Oil inlet (DIN ISO 228) C 25M 30M 40M 50M 26 350 400 2500 2800 9.5 32 350 400 2500 2800 9.7 42 350 400 2300 2600 9.9 50 350 400 2100 2400 10.0 3/4’’BSP 1’’BSP 5 3/4’’BSP 3/4’’BSP 1’’BSP 1’’BSP Drain hole 3/4’’BSP 1’’BSP How to order: 3 Example: Pump 50cm /rot; operating pressure up to 350 bar; peak pressure 400 bar, ref. BI M BI50M Fluids Recommended viscosity range Limits viscosity range Start-up viscosity range, without load Filtration Inlet pressure range mineral oils type ISO HM or DIN 51524-2 HLP 20 to 40 cSt (mm2/s) at working temperature 10 to 750 cSt (mm2/s) 750 to 1500 cSt (mm2/s) 10μm ISO4406 18/13 0,8 to 2 bar abs In the application of any of these pumps; the use of these data does not exempt the reading of the instruction ‘’BI pumps recommendations before start-up’’ 1 These values are valid at an absolute pressure of 1 bar in suction port when operating with a mineral oil at a viscosity of 30 mm 2/s (cSt). ABER is constantly engaged in improving its products and, therefore, reserves itself the right to modify without any further notice the characteristics shown ABER - Embraiagens e Comandos Hidráulicos - A. B. LDA Rua Francisco de Almeida, Nº 30 – Vila Nova da Telha – 4470 MAIA - Portugal Telefone: +351.22.9438070 Fax: +351.22.9420823 e-mail: [email protected] http://www.aber.pt 1/ 2 OIL-HYDRAULIC BENT PUMP AXIAL PISTONS Diagram Flow - Speed Ref. BI M Flow (l/min) Diagram Input Power - Flow – Pressure Speed (rpm) Power (cv) Hose dimensions Inlet Hose Flow (l/min) Outlet Hose Flow (l/min) 30 40 50 60 70 80 90 100 110 Internal pipe diameter (inch) 1/2" 5/8" 5/8" 3/4" 1" 1" 1" 1" 1" 50-100 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 1" 1" 1" 100-150 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 1" 1" 1" 150-200 P (bar) 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 1" 1" 200-300 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 300-350 CTI BI M 1311- 3 30-40 50-60 70-90 100-120 Internal pipe diameter (inch) 1"1/4 1"1/2 1"3/4 2" Important notes: -To install one of these pumps, please consult and respect the instruction “BI pumps recommendations before start-up”; - Other axis available, please consult “Axel options”. ABER is constantly engaged in improving its products and, therefore, reserves itself the right to modify without any further notice the characteristics shown ABER - Embraiagens e Comandos Hidráulicos - A. B. LDA Rua Francisco de Almeida, Nº 30 – Vila Nova da Telha – 4470 MAIA - Portugal Telefone: +351.22.9438070 Fax: +351.22.9420823 e-mail: [email protected] http://www.aber.pt 2/ 2
Documentos relacionados
OIl-HYDRAULIC BENT PUMP AXIAL PISTONS
UŽSISAKYKITE internetu www.dominga.lt/eshop telefonu +370 52 322231 el. paštu [email protected]
Leia maisOil-Hydraulic Bent Pump Axial Pistons BENT AXIS PISTON PUMP
it if needed (use drawing “Change rotation sense”, to do it); 2- Unscrew the drain hole; 3- Full fill the case with oil; 4- Screw the drain hole; 5- Apply the inlet and outlet connections in the pu...
Leia maisbent motor axial pistons (en) recommendations before
stay between minimum 10cSt and maximum 400 cSt. In situations, when the viscosities stay between 400 cSt and 1500 cSt, the system can be turned on, but cannot be loaded. It can only work when empty...
Leia mais