- Synthopol Chemie

LIOPUR PFL 3046
Characteristics:
aqueous aliphatic polyurethane dispersion based on an oleochemical polyester,
Surfactant- and TEA-free
Supplied as:
34% in water
Properties:
appearance
transparent to colloidal
non-volatile content
(as supplied)
(in-house method AV-F-F003)
34 +/-2%
pH-value
(as supplied)
(in-house method AV-F-P001)
7.0-9.0
viscosity in mPas
(as supplied)
(in-house methode AV-F-V005)
30-750
organic solvents
max. 0,5% acetone
Minimum film forming temperature
< 20°C
Properties and fields
of use:
Liopur PFL 3046 does not need any amount of cosolvents for film formation.
Coatings based on Liopur PFL 3046 form tack-free, transparent films with medium surface
hardness after air drying with good flexibility and elasticity.
Liopur PFL 3046 exhibits very good water resistance and good ethanol resistance. The
dispersion is recommended for combination with Liocryl acrylic emulsions.
Liopur PFL 3046 is suitable for plastics coatings due to its polymer composition.
Coatings based on Liopur PFL 3046 have the following Zwick material testing
characteristics after 4 days drying at room temperature (initial force 1 N, testing speed 100
mm/min):
Tear strength
Elongation at break
Storage:
approx. 8 N/mm2
approx. 500 %
The dispersion should be stored in tightly closed containers, protected from frost.
This information is based on careful testing. We cannot accept any guarantee should the above values prove to be incomplete or
inaccurate. We therefore recommend evaluation in the customer’s own laboratories before use.
Issued: 12/2016-4
All data is given to the best of our knowledge, for the purpose of information and advice. No claims of any kind - including in respect of patent rights - can be inferred herefrom.
Page 1 / 1