P 26 high precision pressure transmitter - halstrup
Transcrição
P 26 high precision pressure transmitter - halstrup
P 26 10 / 50 / 100 / 250 / 500 Pa 1 / 2.5 / 5 / 10 / 20 / 50 / 100 kPa freely scalable from 10 .. 100 % within a measurement range others available upon request Margin of error ± 0.2 % or ± 0.5 % of the scaled range + 0.3 Pa (40 .. 100 % of max. value) Temperature coefficient span 0.03 % of max. value / K (10 .. 50 ° C) Temperature coefficient zero point ± 0 % (cyclical zero-point correction) Max. system pressure / Overload capacity 600 kPa for measurement ranges ≥ 2.5 kPa 200 x for measurement ranges < 2.5 kPa Medium air, all non-aggressive gases Sensor response time 25 ms Time constants 25 ms .. 40 s (adjustable) Operating temperature 10 .. 50 ° C Storage temperature - 10 .. 70 ° C Power consumption approx. 6 VA Weight approx. 750 g Cable glands 3 x M 16 Pressure ports Features Protection class IP 65, with USB: IP 40 Certificates CE, CSA xx H igh precision differential pressure transmitter for top-hat rail or wall mounting (air-conditioning, cleanroom, process) xx Wide range of units available for pressure and volume flow, also ± measurement ranges xx Scalable measurement ranges and units xx Zero-point correction prevents zero-point drift xx Built-in valve provides a high level of overpressure protection xx Multilingual menu (English / French / German / Italian) Output (linear/ root-extracted) 1) A 0 .. 10 V (R L ≥ 2 kΩ) 1 0 .. 20 mA (R L≤ 500 Ω) 0 4 .. 20 mA (R L≤ 500 Ω) 4 ± 5 V (R L ≥ 2 kΩ) 5 Power supply B 24 V AC / DC ± 10 % 24ACDC 24 V AC + 6 % (with galvanic separation) 230 / 115 V AC - 15 % 24AC 230/115 Optional output signals can be configured freely Margin of error Measurement range e.g. 0 .. 10 Pa, -10 .. 50 mbar, ± 100 mmHg (etc.) 2) Display + keyboard E LC multi-coloured LCD and keyboard ± 0.2 % 2) 2 ± 0.5 % 2) S f the scaled range (40 .. 100 % of o max. value) (min. 0.3 Pa) Contact points 0 none D none 0 air meter 1 2 relays (changeover contacts) max. 230 V AC, 6 A 2 G none 0 6.5 USB (data cable supplied) U0 External zero-point calibration 0X External zero-point calibration and USB (data cable supplied) UX P 26 A – B – C – D – E – F – G – Can be pre-set on request: Time constant, relay parameter, analogue output rootextracted / linear, deactivation of the cyclic zeroing 20 P 26 with display F Data interface Order code xx Contact points with adjustable switching outputs xx Set the zero-point via the interface xx USB interface (free parameterisation software at www.halstrup-walcher.com) xx Air meter function 6.5 C 102.5 94.5 58.5±1.5 Measurement range 76 1) for tubing NW 6 mm, others available on request 164 149.5±1.5 P 26 without display Data sheet P 26 – Date: 09 / 2016 – Subject to technical changes without notice Measurement ranges (also ± measurement ranges) Measurement of differential pressure Measurement of differential pressure is useful in a broad range of applications. It is used in ventilation and air-conditioning technology but also in many areas of air handling process technology. The next pages show a number of these. You can find more information about pressure sensor technology on p. 6. halstrup-walcher offers a wide range of products for stationary measurement of differential pressure. PUC 24 PUC 28 (K) P 26 P 34 P 29 PU / PI / PIZ PS 27 REG 21 Details on p. 18 p. 19 p. 20 p. 21 p. 22 p. 23 p. 24 p. 25 Application Process monitoring for cleanrooms (Pa, ° C, % rH), with stainless steel front Process monitoring panel (optional: with calibration port) (Pa, ° C, % rH), aluminium, anodised High precision, scalable differential pressure transmitter Measuring transmitter with very small dimensions – ideal for the control cabinet Like P 26, for natural gas For standard applications. PIZ: PI in two wire technology A basic sensor for simple applications Measurement and regulation of pressure Housing installation Installed in wall (panel) Max. measurement range ± 250 Pa Min. measurement range ± 100 Pa ± 10 Pa ± 250 Pa ± 0.5 % 1) ± 0.2 % of the scaled range (40 .. 100 % of max. value) 2) ± 0.2 % 1) Degree of measurement uncertainty Mounted on a wall / top-hat rail Rack ± 100 kPa (standard) (optional) (optional) ± 0.5 % 1) ± 50 Pa ± 0.2 % 1) 3) ± 0.5 % 1) 2) ± 1 % 1) or ± 3 % (standard) ± 0.5 % of the scaled range (40 .. 100 % of max. value) 2) (for 50 Pa) of the set value (standard) 1) 4) Squareroot (volume flow) - - Display optional ± 0.5 % 1) 2) ± 1 % 1) ± 2 % (≥ 100 Pa) 4) - - - - optional optional optional max. value of upper range value but not less than 0.3 Pa for measurement ranges ≥ 250 Pa only optionally with stat. pressure sensor and temperature analogue input for compensation 2) 3) Accessories Certificates (see p. 41) Order no. DAkkS calibration certificate (German) DAkkS calibration certificate (English) ISO factory calibration certificate 9601.0003 9601.0004 9601.0002 Connecting components Silicone tubing ID 5 mm, OD 9 mm, red (please state length required) Silicone tubing ID 5 mm, OD 9 mm, blue (please state length required) Walcher Meßtechnik akkreditiert durch die / accredited by the Deutsche Akkreditierungsstelle GmbH als Kalibrierlaboratorium im / as calibration laboratory in the Deutschen Kalibrierdienst Kalibrierzeichen Calibration mark Gegenstand Digitales Druckmessgerät Hersteller halstrup-walcher GMBH Typ xx Object 9601.0160 2100xxx Kalibrierschein Calibration certificate Manufacturer Type Dieser Kalibrierschein dokumentiert die Rückführung auf nationale Normale zur Darstellung der Einheiten in Übereinstimmung mit dem Internationalen Einheitensystem (SI). Die DAkkS ist Unterzeichner der multilateralen Übereinkommen der European co-operation for Accreditation (EA) und der International Laboratory Accreditation Cooperation (ILAC) zur gegenseitigen Anerkennung der Kalibrierscheine. Für die Einhaltung einer angemessenen Frist zur Wiederholung der Kalibrierung ist der Benutzer verantwortlich. This calibration certificate documents the traceabi-lity to national standards, which realize the units of measurement according to the International Sy-stem of Units (SI). The DAkkS is signatory to the multilateral agree-ments of the European co-operation for Accredita-tion (EA) and of the International Laboratory Accreditation Cooperation (ILAC) for the mutual recognition of calibration certificates. The user is obliged to have the object recalibrated at appropriate intervals. Fabrikat/Serien-Nr. xx 9601.0161 Norprene tubing9061.0132 (please state length required) Y-piece for tubing9601.0171 Pressure ports We can supply a wide range of customer-specific pressure ports, e.g. various cutting ring couplings or hose connectors. Serial number Auftraggeber Customer halstrup-walcher GmbH Stegener-Straße 10 D - 79199 Kirchzarten Auftragsnummer 2100xxx Order No. Anzahl der Seiten des Kalibrierscheines -3Number of pages of the certificate Datum der Kalibrierung D-K15083 -01-00 2012-01 17. Januar 2012 Date of calibration Dieser Kalibrierschein darf nur vollständig und unverändert weiterverbreitet werden. Auszüge oder Änderungen bedürfen der Genehmigung sowohl der Deutschen Akkreditierungsstelle als auch des ausstellenden Kalibrierlaboratoriums. Kalibrierscheine ohne Unterschrift haben keine Gültigkeit. This calibration certificate may not be reproduced other than in full except with the permission of both the German Accreditation Body and the issuing laboratory. Calibration certificates without signature are not valid. Datum Date Leiter des Kalibrierlaboratoriums Head of the calibration laboratory 19. September 2012 R. Heizler Walcher Meßtechnik GmbH Stegener Straße 10 D-79199 Kirchzarten Bearbeiter Person in charge J. Lotze Telefon: + + 49(0)7661/3963-0 Telefax: + + 49(0)7661/3963-99 e-mail: info @ walcher. de 15